mirror of
https://github.com/pascallanger/DIY-Multiprotocol-TX-Module.git
synced 2025-02-04 17:48:11 +00:00
95746f80a1
* Added sub-protocol RF_SIM to the SLT protocol * fixed typo --------- Co-authored-by: Arild Langseid <arild@langseid.no>
325 lines
8.7 KiB
C++
325 lines
8.7 KiB
C++
/*
|
|
This project is free software: you can redistribute it and/or modify
|
|
it under the terms of the GNU General Public License as published by
|
|
the Free Software Foundation, either version 3 of the License, or
|
|
(at your option) any later version.
|
|
|
|
Multiprotocol is distributed in the hope that it will be useful,
|
|
but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
GNU General Public License for more details.
|
|
|
|
You should have received a copy of the GNU General Public License
|
|
along with Multiprotocol. If not, see <http://www.gnu.org/licenses/>.
|
|
*/
|
|
// Last sync with deviation main github branch
|
|
|
|
#if defined(SLT_CCNRF_INO)
|
|
|
|
#include "iface_nrf250k.h"
|
|
|
|
//#define SLT_Q200_FORCE_ID
|
|
|
|
// For code readability
|
|
#define SLT_PAYLOADSIZE_V1 7
|
|
#define SLT_PAYLOADSIZE_V1_4 5
|
|
#define SLT_PAYLOADSIZE_V2 11
|
|
#define SLT_NFREQCHANNELS 15
|
|
#define SLT_TXID_SIZE 4
|
|
#define SLT_BIND_CHANNEL 0x50
|
|
|
|
enum{
|
|
// flags going to packet[6] (Q200)
|
|
FLAG_Q200_FMODE = 0x20,
|
|
FLAG_Q200_VIDON = 0x10,
|
|
FLAG_Q200_FLIP = 0x08,
|
|
FLAG_Q200_VIDOFF= 0x04,
|
|
};
|
|
|
|
enum{
|
|
// flags going to packet[6] (MR100 & Q100)
|
|
FLAG_MR100_FMODE = 0x20,
|
|
FLAG_MR100_FLIP = 0x04,
|
|
FLAG_MR100_VIDEO = 0x02,
|
|
FLAG_MR100_PICTURE = 0x01,
|
|
};
|
|
|
|
enum {
|
|
SLT_BUILD=0,
|
|
SLT_DATA1,
|
|
SLT_DATA2,
|
|
SLT_DATA3,
|
|
SLT_BIND1,
|
|
SLT_BIND2,
|
|
};
|
|
|
|
static void __attribute__((unused)) SLT_RF_init()
|
|
{
|
|
NRF250K_Init();
|
|
NRF250K_SetTXAddr(rx_tx_addr, SLT_TXID_SIZE);
|
|
}
|
|
|
|
static void __attribute__((unused)) SLT_set_freq(void)
|
|
{
|
|
// Frequency hopping sequence generation
|
|
for (uint8_t i = 0; i < SLT_TXID_SIZE; ++i)
|
|
{
|
|
uint8_t next_i = (i+1) % SLT_TXID_SIZE; // is & 3 better than % 4 ?
|
|
uint8_t base = i < 2 ? 0x03 : 0x10;
|
|
hopping_frequency[i*4 + 0] = (rx_tx_addr[i] & 0x3f) + base;
|
|
hopping_frequency[i*4 + 1] = (rx_tx_addr[i] >> 2) + base;
|
|
hopping_frequency[i*4 + 2] = (rx_tx_addr[i] >> 4) + (rx_tx_addr[next_i] & 0x03)*0x10 + base;
|
|
hopping_frequency[i*4 + 3] = (rx_tx_addr[i] >> 6) + (rx_tx_addr[next_i] & 0x0f)*0x04 + base;
|
|
}
|
|
|
|
// Unique freq
|
|
uint8_t max_freq=0x50; //V1 and V2
|
|
if(sub_protocol==Q200)
|
|
max_freq=45;
|
|
for (uint8_t i = 0; i < SLT_NFREQCHANNELS; ++i)
|
|
{
|
|
if(sub_protocol==Q200 && hopping_frequency[i] >= max_freq)
|
|
hopping_frequency[i] = hopping_frequency[i] - max_freq + 0x03;
|
|
uint8_t done = 0;
|
|
while (!done)
|
|
{
|
|
done = 1;
|
|
for (uint8_t j = 0; j < i; ++j)
|
|
if (hopping_frequency[i] == hopping_frequency[j])
|
|
{
|
|
done = 0;
|
|
hopping_frequency[i] += 7;
|
|
if (hopping_frequency[i] >= max_freq)
|
|
hopping_frequency[i] = hopping_frequency[i] - max_freq + 0x03;
|
|
}
|
|
}
|
|
}
|
|
#if 0
|
|
debug("CH:");
|
|
for (uint8_t i = 0; i < SLT_NFREQCHANNELS; ++i)
|
|
debug(" %02X", hopping_frequency[i]);
|
|
debugln();
|
|
#endif
|
|
|
|
//Bind channel
|
|
hopping_frequency[SLT_NFREQCHANNELS]=SLT_BIND_CHANNEL;
|
|
|
|
//Calib all channels
|
|
NRF250K_HoppingCalib(SLT_NFREQCHANNELS+1);
|
|
}
|
|
|
|
static void __attribute__((unused)) SLT_wait_radio()
|
|
{
|
|
if (packet_sent)
|
|
while (!NRF250K_IsPacketSent());
|
|
packet_sent = 0;
|
|
}
|
|
|
|
static void __attribute__((unused)) SLT_send_packet(uint8_t len)
|
|
{
|
|
SLT_wait_radio();
|
|
NRF250K_WritePayload(packet, len);
|
|
packet_sent = 1;
|
|
}
|
|
|
|
static void __attribute__((unused)) SLT_build_packet()
|
|
{
|
|
static uint8_t calib_counter=0;
|
|
|
|
// Set radio channel - once per packet batch
|
|
NRF250K_SetFreqOffset(); // Set frequency offset
|
|
NRF250K_Hopping(hopping_frequency_no);
|
|
if (++hopping_frequency_no >= SLT_NFREQCHANNELS)
|
|
hopping_frequency_no = 0;
|
|
|
|
// aileron, elevator, throttle, rudder, gear, pitch
|
|
uint8_t e = 0; // byte where extension 2 bits for every 10-bit channel are packed
|
|
for (uint8_t i = 0; i < 4; ++i)
|
|
{
|
|
uint16_t v = convert_channel_10b(sub_protocol != SLT_V1_4 ? CH_AETR[i] : i, false);
|
|
if(sub_protocol>SLT_V2 && (i==CH2 || i==CH3) && sub_protocol != SLT_V1_4 && sub_protocol != RF_SIM)
|
|
v=1023-v; // reverse throttle and elevator channels for Q100/Q200/MR100 protocols
|
|
packet[i] = v;
|
|
e = (e >> 2) | (uint8_t) ((v >> 2) & 0xC0);
|
|
}
|
|
// Extra bits for AETR
|
|
packet[4] = e;
|
|
|
|
//->V1_4CH stops here
|
|
|
|
// 8-bit channels
|
|
packet[5] = convert_channel_8b(CH5);
|
|
packet[6] = convert_channel_8b(CH6);
|
|
|
|
//->V1 stops here
|
|
|
|
if(sub_protocol==Q200)
|
|
packet[6] = GET_FLAG(CH9_SW , FLAG_Q200_FMODE)
|
|
|GET_FLAG(CH10_SW, FLAG_Q200_FLIP)
|
|
|GET_FLAG(CH11_SW, FLAG_Q200_VIDON)
|
|
|GET_FLAG(CH12_SW, FLAG_Q200_VIDOFF);
|
|
else if(sub_protocol==MR100 || sub_protocol==Q100)
|
|
packet[6] = GET_FLAG(CH9_SW , FLAG_MR100_FMODE)
|
|
|GET_FLAG(CH10_SW, FLAG_MR100_FLIP)
|
|
|GET_FLAG(CH11_SW, FLAG_MR100_VIDEO) // Does not exist on the Q100 but...
|
|
|GET_FLAG(CH12_SW, FLAG_MR100_PICTURE); // Does not exist on the Q100 but...
|
|
packet[7]=convert_channel_8b(CH7);
|
|
packet[8]=convert_channel_8b(CH8);
|
|
if(sub_protocol==RF_SIM) {
|
|
packet[9]=convert_channel_8b(CH9);
|
|
packet[10]=convert_channel_8b(CH10);
|
|
} else {
|
|
packet[9]=0xAA; //normal mode for Q100/Q200, unknown for V2/MR100
|
|
packet[10]=0x00; //normal mode for Q100/Q200, unknown for V2/MR100
|
|
}
|
|
if((sub_protocol==Q100 || sub_protocol==Q200) && CH13_SW)
|
|
{//Calibrate
|
|
packet[9]=0x77; //enter calibration
|
|
if(calib_counter>=20 && calib_counter<=25) // 7 packets for Q100 / 3 packets for Q200
|
|
packet[10]=0x20; //launch calibration
|
|
calib_counter++;
|
|
if(calib_counter>250) calib_counter=250;
|
|
}
|
|
else
|
|
calib_counter=0;
|
|
}
|
|
|
|
static void __attribute__((unused)) SLT_send_bind_packet()
|
|
{
|
|
SLT_wait_radio();
|
|
NRF250K_Hopping(SLT_NFREQCHANNELS); //Bind channel
|
|
BIND_IN_PROGRESS; //Limit TX power to bind level
|
|
NRF250K_SetPower();
|
|
BIND_DONE;
|
|
NRF250K_SetTXAddr((uint8_t *)"\x7E\xB8\x63\xA9", SLT_TXID_SIZE);
|
|
memcpy((void*)packet,(void*)rx_tx_addr,SLT_TXID_SIZE);
|
|
if(phase==SLT_BIND2)
|
|
SLT_send_packet(SLT_TXID_SIZE);
|
|
else // SLT_BIND1
|
|
SLT_send_packet(SLT_PAYLOADSIZE_V2);
|
|
}
|
|
|
|
#define SLT_TIMING_BUILD 1000
|
|
#define SLT_V1_TIMING_PACKET 1000
|
|
#define SLT_V1_4_TIMING_PACKET 1643
|
|
#define SLT_V2_TIMING_PACKET 2042
|
|
#define SLT_V1_TIMING_BIND2 1000
|
|
#define SLT_V2_TIMING_BIND1 6507
|
|
#define SLT_V2_TIMING_BIND2 2112
|
|
uint16_t SLT_callback()
|
|
{
|
|
switch (phase)
|
|
{
|
|
case SLT_BUILD:
|
|
//debugln_time("b ");
|
|
#ifdef MULTI_SYNC
|
|
telemetry_set_input_sync(packet_period);
|
|
#endif
|
|
SLT_build_packet();
|
|
NRF250K_SetPower(); //Change power level
|
|
NRF250K_SetTXAddr(rx_tx_addr, SLT_TXID_SIZE);
|
|
phase++;
|
|
return SLT_TIMING_BUILD;
|
|
case SLT_DATA1:
|
|
case SLT_DATA2:
|
|
phase++;
|
|
SLT_send_packet(packet_length);
|
|
if(sub_protocol==SLT_V1)
|
|
return SLT_V1_TIMING_PACKET;
|
|
if(sub_protocol==SLT_V1_4)
|
|
{
|
|
phase++; //Packets are sent two times only
|
|
return SLT_V1_4_TIMING_PACKET;
|
|
}
|
|
//V2
|
|
return SLT_V2_TIMING_PACKET;
|
|
case SLT_DATA3:
|
|
SLT_send_packet(packet_length);
|
|
if (++packet_count >= 100)
|
|
{// Send bind packet
|
|
packet_count = 0;
|
|
if(sub_protocol==SLT_V1||sub_protocol==SLT_V1_4)
|
|
{
|
|
phase=SLT_BIND2;
|
|
return SLT_V1_TIMING_BIND2;
|
|
}
|
|
//V2
|
|
phase=SLT_BIND1;
|
|
return SLT_V2_TIMING_BIND1;
|
|
}
|
|
else
|
|
{// Continue to send normal packets
|
|
phase = SLT_BUILD;
|
|
if(sub_protocol==SLT_V1)
|
|
return 20000-SLT_TIMING_BUILD;
|
|
if(sub_protocol==SLT_V1_4)
|
|
return 18000-SLT_TIMING_BUILD-SLT_V1_4_TIMING_PACKET;
|
|
//V2
|
|
return 13730-SLT_TIMING_BUILD;
|
|
}
|
|
case SLT_BIND1:
|
|
SLT_send_bind_packet();
|
|
phase++;
|
|
return SLT_V2_TIMING_BIND2;
|
|
case SLT_BIND2:
|
|
SLT_send_bind_packet();
|
|
phase = SLT_BUILD;
|
|
if(sub_protocol==SLT_V1)
|
|
return 20000-SLT_TIMING_BUILD-SLT_V1_TIMING_BIND2;
|
|
if(sub_protocol==SLT_V1_4)
|
|
return 18000-SLT_TIMING_BUILD-SLT_V1_TIMING_BIND2-SLT_V1_4_TIMING_PACKET;
|
|
//V2
|
|
return 13730-SLT_TIMING_BUILD-SLT_V2_TIMING_BIND1-SLT_V2_TIMING_BIND2;
|
|
}
|
|
return 19000;
|
|
}
|
|
|
|
void SLT_init()
|
|
{
|
|
BIND_DONE; // Not a TX bind protocol
|
|
packet_count = 0;
|
|
packet_sent = 0;
|
|
hopping_frequency_no = 0;
|
|
if(sub_protocol==Q200)
|
|
{ //Q200: Force high part of the ID otherwise it won't bind
|
|
rx_tx_addr[0]=0x01;
|
|
rx_tx_addr[1]=0x02;
|
|
#ifdef SLT_Q200_FORCE_ID // ID taken from TX dumps
|
|
rx_tx_addr[0]=0x01;rx_tx_addr[1]=0x02;rx_tx_addr[2]=0x6A;rx_tx_addr[3]=0x31;
|
|
/* rx_tx_addr[0]=0x01;rx_tx_addr[1]=0x02;rx_tx_addr[2]=0x0B;rx_tx_addr[3]=0x57;*/
|
|
#endif
|
|
}
|
|
SLT_RF_init();
|
|
SLT_set_freq();
|
|
phase = SLT_BUILD;
|
|
if(sub_protocol==SLT_V1)
|
|
{
|
|
packet_length = SLT_PAYLOADSIZE_V1;
|
|
#ifdef MULTI_SYNC
|
|
packet_period = 20000+2*SLT_V1_TIMING_PACKET; //22ms
|
|
#endif
|
|
}
|
|
else if(sub_protocol==SLT_V1_4)
|
|
{
|
|
packet_length = SLT_PAYLOADSIZE_V1_4;
|
|
#ifdef MULTI_SYNC
|
|
packet_period = 18000; //18ms
|
|
#endif
|
|
//Test IDs
|
|
MProtocol_id = MProtocol_id_master ^ (1<<RX_num);
|
|
set_rx_tx_addr(MProtocol_id);
|
|
debugln("Try ID: %lx", MProtocol_id);
|
|
}
|
|
else //V2
|
|
{
|
|
packet_length = SLT_PAYLOADSIZE_V2;
|
|
#ifdef MULTI_SYNC
|
|
packet_period = 13730+2*SLT_V2_TIMING_PACKET; //~18ms
|
|
#endif
|
|
}
|
|
}
|
|
|
|
#endif
|
|
//SLT v1_4ch timing
|
|
//268363 + 1643 / 15 = 18000
|