gomaomao/DIY-Multiprotocol-TX-Module
1
0
Fork 0
mirror of https://github.com/pascallanger/DIY-Multiprotocol-TX-Module.git synced 2025-02-04 18:48:11 +00:00
Code Issues Projects Releases Wiki Activity
DIY-Multiprotocol-TX-Module/Multiprotocol/Multiprotocol.h
Pascal Langer dfd3386319 FrSkyX v2.1: initial support 
Rewrite of the FrSkyX code to support both v1 and v2.1.0 with FCC and LBT.
FrSky v1 accessible as usual
FrSky v2.1.0 accessible through the protocol 64=FrSkyX2 with the same subprotocols as v1
The LBT feature is now fully implemented on the TX and turned on for both v1 LBT and v2.1.0 LBT.
For v2.1.0, to access the bind functions Telem=on/off, CH1-8/9-16 and bidirectional SPort (SxR setup for example), you need to update OpenTX to the latest 2.3.8 nightly (not available yet).
2020-03-29 18:44:03 +02:00

1063 lines
27 KiB
C
Raw Blame History

/*
This project is free software: you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation, either version 3 of the License, or
(at your option) any later version.
Multiprotocol is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with Multiprotocol. If not, see <http://www.gnu.org/licenses/>.
*/
//******************
// Version
//******************
#define VERSION_MAJOR 1
#define VERSION_MINOR 3
#define VERSION_REVISION 0
#define VERSION_PATCH_LEVEL 79
//******************
// Protocols
//******************
enum PROTOCOLS
{
MODE_SERIAL = 0, // Serial commands
PROTO_FLYSKY = 1, // =>A7105
PROTO_HUBSAN = 2, // =>A7105
PROTO_FRSKYD = 3, // =>CC2500
PROTO_HISKY = 4, // =>NRF24L01
PROTO_V2X2 = 5, // =>NRF24L01
PROTO_DSM = 6, // =>CYRF6936
PROTO_DEVO = 7, // =>CYRF6936
PROTO_YD717 = 8, // =>NRF24L01
PROTO_KN = 9, // =>NRF24L01
PROTO_SYMAX = 10, // =>NRF24L01
PROTO_SLT = 11, // =>NRF24L01
PROTO_CX10 = 12, // =>NRF24L01
PROTO_CG023 = 13, // =>NRF24L01
PROTO_BAYANG = 14, // =>NRF24L01
PROTO_FRSKYX = 15, // =>CC2500
PROTO_ESKY = 16, // =>NRF24L01
PROTO_MT99XX = 17, // =>NRF24L01
PROTO_MJXQ = 18, // =>NRF24L01
PROTO_SHENQI = 19, // =>NRF24L01
PROTO_FY326 = 20, // =>NRF24L01
PROTO_SFHSS = 21, // =>CC2500
PROTO_J6PRO = 22, // =>CYRF6936
PROTO_FQ777 = 23, // =>NRF24L01
PROTO_ASSAN = 24, // =>NRF24L01
PROTO_FRSKYV = 25, // =>CC2500
PROTO_HONTAI = 26, // =>NRF24L01
PROTO_OPENLRS = 27, // =>OpenLRS hardware
PROTO_AFHDS2A = 28, // =>A7105
PROTO_Q2X2 = 29, // =>NRF24L01, extension of CX-10 protocol
PROTO_WK2x01 = 30, // =>CYRF6936
PROTO_Q303 = 31, // =>NRF24L01
PROTO_GW008 = 32, // =>NRF24L01
PROTO_DM002 = 33, // =>NRF24L01
PROTO_CABELL = 34, // =>NRF24L01
PROTO_ESKY150 = 35, // =>NRF24L01
PROTO_H8_3D = 36, // =>NRF24L01
PROTO_CORONA = 37, // =>CC2500
PROTO_CFLIE = 38, // =>NRF24L01
PROTO_HITEC = 39, // =>CC2500
PROTO_WFLY = 40, // =>CYRF6936
PROTO_BUGS = 41, // =>A7105
PROTO_BUGSMINI = 42, // =>NRF24L01
PROTO_TRAXXAS = 43, // =>CYRF6936
PROTO_NCC1701 = 44, // =>NRF24L01
PROTO_E01X = 45, // =>NRF24L01
PROTO_V911S = 46, // =>NRF24L01
PROTO_GD00X = 47, // =>NRF24L01
PROTO_V761 = 48, // =>NRF24L01
PROTO_KF606 = 49, // =>NRF24L01
PROTO_REDPINE = 50, // =>CC2500
PROTO_POTENSIC = 51, // =>NRF24L01
PROTO_ZSX = 52, // =>NRF24L01
PROTO_FLYZONE = 53, // =>A7105
PROTO_SCANNER = 54, // =>CC2500
PROTO_FRSKY_RX = 55, // =>CC2500
PROTO_AFHDS2A_RX= 56, // =>A7105
PROTO_HOTT = 57, // =>CC2500
PROTO_FX816 = 58, // =>NRF24L01
PROTO_BAYANG_RX = 59, // =>NRF24L01
PROTO_PELIKAN = 60, // =>A7105
PROTO_TIGER = 61, // =>NRF24L01
PROTO_XK = 62, // =>NRF24L01
PROTO_XN297DUMP = 63, // =>NRF24L01
PROTO_FRSKYX2 = 64, // =>CC2500
PROTO_FRSKY_R9 = 65, // =>SX1276
};
enum Flysky
{
Flysky = 0,
V9X9 = 1,
V6X6 = 2,
V912 = 3,
CX20 = 4,
};
enum Flyzone
{
FZ410 = 0,
};
enum Hubsan
{
H107 = 0,
H301 = 1,
H501 = 2,
};
enum AFHDS2A
{
PWM_IBUS = 0,
PPM_IBUS = 1,
PWM_SBUS = 2,
PPM_SBUS = 3,
};
enum Hisky
{
Hisky = 0,
HK310 = 1,
};
enum DSM
{
DSM2_22 = 0,
DSM2_11 = 1,
DSMX_22 = 2,
DSMX_11 = 3,
DSM_AUTO = 4,
};
enum YD717
{
YD717 = 0,
SKYWLKR = 1,
SYMAX4 = 2,
XINXUN = 3,
NIHUI = 4,
};
enum KN
{
WLTOYS = 0,
FEILUN = 1,
};
enum SYMAX
{
SYMAX = 0,
SYMAX5C = 1,
};
enum SLT
{
SLT_V1 = 0,
SLT_V2 = 1,
Q100 = 2,
Q200 = 3,
MR100 = 4,
};
enum CX10
{
CX10_GREEN = 0,
CX10_BLUE = 1, // also compatible with CX10-A, CX12
DM007 = 2,
JC3015_1 = 4,
JC3015_2 = 5,
MK33041 = 6,
};
enum Q2X2
{
Q222 = 0,
Q242 = 1,
Q282 = 2,
F_Q222 = 8,
F_Q242 = 9,
F_Q282 = 10,
};
enum CG023
{
CG023 = 0,
YD829 = 1,
};
enum BAYANG
{
BAYANG = 0,
H8S3D = 1,
X16_AH = 2,
IRDRONE = 3,
DHD_D4 = 4,
};
enum MT99XX
{
MT99 = 0,
H7 = 1,
YZ = 2,
LS = 3,
FY805 = 4,
};
enum MJXQ
{
WLH08 = 0,
X600 = 1,
X800 = 2,
H26D = 3,
E010 = 4,
H26WH = 5,
PHOENIX = 6,
};
enum FRSKYX
{
CH_16 = 0,
CH_8 = 1,
EU_16 = 2,
EU_8 = 3,
};
enum HONTAI
{
HONTAI = 0,
JJRCX1 = 1,
X5C1 = 2,
FQ777_951 =3,
};
enum V2X2
{
V2X2 = 0,
JXD506 = 1,
};
enum FY326
{
FY326 = 0,
FY319 = 1,
};
enum WK2x01
{
WK2801 = 0,
WK2401 = 1,
W6_5_1 = 2,
W6_6_1 = 3,
W6_HEL = 4,
W6_HEL_I= 5,
};
enum Q303
{
Q303 = 0,
CX35 = 1,
CX10D = 2,
CX10WD = 3,
};
enum CABELL
{
CABELL_V3 = 0,
CABELL_V3_TELEMETRY = 1,
CABELL_SET_FAIL_SAFE= 6,
CABELL_UNBIND = 7,
};
enum H8_3D
{
H8_3D = 0,
H20H = 1,
H20MINI = 2,
H30MINI = 3,
};
enum CORONA
{
COR_V1 = 0,
COR_V2 = 1,
FD_V3 = 2,
};
enum HITEC
{
OPT_FW = 0,
OPT_HUB = 1,
MINIMA = 2,
};
enum E01X
{
E012 = 0,
E015 = 1,
E016H = 2,
};
enum GD00X
{
GD_V1 = 0,
GD_V2 = 1,
};
enum BUGSMINI
{
BUGSMINI= 0,
BUGS3H = 1,
};
enum REDPINE
{
RED_FAST= 0,
RED_SLOW= 1,
};
enum TRAXXAS
{
RX6519 = 0,
};
enum ESKY150
{
ESKY150_4CH = 0,
ESKY150_7CH = 1,
};
enum V911S
{
V911S_STD = 0,
V911S_E119 = 1,
};
enum XK
{
X450 = 0,
X420 = 1,
};
enum XN297DUMP
{
XN297DUMP_250K = 0,
XN297DUMP_1M = 1,
XN297DUMP_2M = 2,
XN297DUMP_AUTO = 3,
};
enum FRSKY_R9
{
R9_915 = 0,
R9_868 = 1,
R9_915_8CH = 2,
R9_868_8CH = 3,
};
enum ESKY
{
ESKY_STD = 0,
ESKY_ET4 = 1,
};
#define NONE 0
#define P_HIGH 1
#define P_LOW 0
#define AUTOBIND 1
#define NO_AUTOBIND 0
struct PPM_Parameters
{
uint8_t protocol;
uint8_t sub_proto : 3;
uint8_t rx_num : 6;
uint8_t power : 1;
uint8_t autobind : 1;
int8_t option;
uint32_t chan_order;
};
// Telemetry
enum MultiPacketTypes
{
MULTI_TELEMETRY_STATUS = 1,
MULTI_TELEMETRY_SPORT = 2,
MULTI_TELEMETRY_HUB = 3,
MULTI_TELEMETRY_DSM = 4,
MULTI_TELEMETRY_DSMBIND = 5,
MULTI_TELEMETRY_AFHDS2A = 6,
MULTI_TELEMETRY_REUSE_1 = 7,
MULTI_TELEMETRY_SYNC = 8,
MULTI_TELEMETRY_REUSE_2 = 9,
MULTI_TELEMETRY_HITEC = 10,
MULTI_TELEMETRY_SCANNER = 11,
MULTI_TELEMETRY_AFHDS2A_AC = 12,
MULTI_TELEMETRY_RX_CHANNELS = 13,
MULTI_TELEMETRY_HOTT = 14,
};
// Macros
#define NOP() __asm__ __volatile__("nop")
//***************
//*** Tests ***
//***************
#define IS_FAILSAFE_PROTOCOL ( (protocol==PROTO_HISKY && sub_protocol==HK310) || protocol==PROTO_AFHDS2A || protocol==PROTO_DEVO || protocol==PROTO_SFHSS || protocol==PROTO_WK2x01 || protocol== PROTO_HOTT || protocol==PROTO_FRSKYX || protocol==PROTO_FRSKYX2 )
#define IS_CHMAP_PROTOCOL ( (protocol==PROTO_HISKY && sub_protocol==HK310) || protocol==PROTO_AFHDS2A || protocol==PROTO_DEVO || protocol==PROTO_SFHSS || protocol==PROTO_WK2x01 || protocol== PROTO_DSM || protocol==PROTO_SLT || protocol==PROTO_FLYSKY || protocol==PROTO_ESKY || protocol==PROTO_J6PRO || protocol==PROTO_PELIKAN )
//***************
//*** Flags ***
//***************
#define RX_FLAG_on protocol_flags |= _BV(0)
#define RX_FLAG_off protocol_flags &= ~_BV(0)
#define IS_RX_FLAG_on ( ( protocol_flags & _BV(0) ) !=0 )
//
#define CHANGE_PROTOCOL_FLAG_on protocol_flags |= _BV(1)
#define CHANGE_PROTOCOL_FLAG_off protocol_flags &= ~_BV(1)
#define IS_CHANGE_PROTOCOL_FLAG_on ( ( protocol_flags & _BV(1) ) !=0 )
//
#define POWER_FLAG_on protocol_flags |= _BV(2)
#define POWER_FLAG_off protocol_flags &= ~_BV(2)
#define IS_POWER_FLAG_on ( ( protocol_flags & _BV(2) ) !=0 )
//
#define RANGE_FLAG_on protocol_flags |= _BV(3)
#define RANGE_FLAG_off protocol_flags &= ~_BV(3)
#define IS_RANGE_FLAG_on ( ( protocol_flags & _BV(3) ) !=0 )
//
#define AUTOBIND_FLAG_on protocol_flags |= _BV(4)
#define AUTOBIND_FLAG_off protocol_flags &= ~_BV(4)
#define IS_AUTOBIND_FLAG_on ( ( protocol_flags & _BV(4) ) !=0 )
//
#define BIND_BUTTON_FLAG_on protocol_flags |= _BV(5)
#define BIND_BUTTON_FLAG_off protocol_flags &= ~_BV(5)
#define IS_BIND_BUTTON_FLAG_on ( ( protocol_flags & _BV(5) ) !=0 )
//PPM RX OK
#define PPM_FLAG_off protocol_flags &= ~_BV(6)
#define PPM_FLAG_on protocol_flags |= _BV(6)
#define IS_PPM_FLAG_on ( ( protocol_flags & _BV(6) ) !=0 )
//Bind flag
#define BIND_IN_PROGRESS protocol_flags &= ~_BV(7)
#define BIND_DONE protocol_flags |= _BV(7)
#define IS_BIND_DONE ( ( protocol_flags & _BV(7) ) !=0 )
#define IS_BIND_IN_PROGRESS ( ( protocol_flags & _BV(7) ) ==0 )
//
#define FAILSAFE_VALUES_off protocol_flags2 &= ~_BV(0)
#define FAILSAFE_VALUES_on protocol_flags2 |= _BV(0)
#define IS_FAILSAFE_VALUES_on ( ( protocol_flags2 & _BV(0) ) !=0 )
//
#define RX_DONOTUPDATE_off protocol_flags2 &= ~_BV(1)
#define RX_DONOTUPDATE_on protocol_flags2 |= _BV(1)
#define IS_RX_DONOTUPDATE_on ( ( protocol_flags2 & _BV(1) ) !=0 )
//
#define RX_MISSED_BUFF_off protocol_flags2 &= ~_BV(2)
#define RX_MISSED_BUFF_on protocol_flags2 |= _BV(2)
#define IS_RX_MISSED_BUFF_on ( ( protocol_flags2 & _BV(2) ) !=0 )
//TX Pause
#define TX_MAIN_PAUSE_off protocol_flags2 &= ~_BV(3)
#define TX_MAIN_PAUSE_on protocol_flags2 |= _BV(3)
#define IS_TX_MAIN_PAUSE_on ( ( protocol_flags2 & _BV(3) ) !=0 )
#define TX_RX_PAUSE_off protocol_flags2 &= ~_BV(4)
#define TX_RX_PAUSE_on protocol_flags2 |= _BV(4)
#define IS_TX_RX_PAUSE_on ( ( protocol_flags2 & _BV(4) ) !=0 )
#define IS_TX_PAUSE_on ( ( protocol_flags2 & (_BV(4)|_BV(3)) ) !=0 )
#define IS_TX_PAUSE_off ( ( protocol_flags2 & (_BV(4)|_BV(3)) ) ==0 )
//Signal OK
#define INPUT_SIGNAL_off protocol_flags2 &= ~_BV(5)
#define INPUT_SIGNAL_on protocol_flags2 |= _BV(5)
#define IS_INPUT_SIGNAL_on ( ( protocol_flags2 & _BV(5) ) !=0 )
#define IS_INPUT_SIGNAL_off ( ( protocol_flags2 & _BV(5) ) ==0 )
//Bind from channel
#define BIND_CH_PREV_off protocol_flags2 &= ~_BV(6)
#define BIND_CH_PREV_on protocol_flags2 |= _BV(6)
#define IS_BIND_CH_PREV_on ( ( protocol_flags2 & _BV(6) ) !=0 )
#define IS_BIND_CH_PREV_off ( ( protocol_flags2 & _BV(6) ) ==0 )
//Wait for bind
#define WAIT_BIND_off protocol_flags2 &= ~_BV(7)
#define WAIT_BIND_on protocol_flags2 |= _BV(7)
#define IS_WAIT_BIND_on ( ( protocol_flags2 & _BV(7) ) !=0 )
#define IS_WAIT_BIND_off ( ( protocol_flags2 & _BV(7) ) ==0 )
//Incoming telemetry data buffer
#define DATA_BUFFER_LOW_off protocol_flags3 &= ~_BV(0)
#define DATA_BUFFER_LOW_on protocol_flags3 |= _BV(0)
#define IS_DATA_BUFFER_LOW_on ( ( protocol_flags3 & _BV(0) ) !=0 )
#define IS_DATA_BUFFER_LOW_off ( ( protocol_flags3 & _BV(0) ) ==0 )
#define SEND_MULTI_STATUS_off protocol_flags3 &= ~_BV(1)
#define SEND_MULTI_STATUS_on protocol_flags3 |= _BV(1)
#define IS_SEND_MULTI_STATUS_on ( ( protocol_flags3 & _BV(1) ) !=0 )
#define IS_SEND_MULTI_STATUS_off ( ( protocol_flags3 & _BV(1) ) ==0 )
#define DISABLE_CH_MAP_off protocol_flags3 &= ~_BV(2)
#define DISABLE_CH_MAP_on protocol_flags3 |= _BV(2)
#define IS_DISABLE_CH_MAP_on ( ( protocol_flags3 & _BV(2) ) !=0 )
#define IS_DISABLE_CH_MAP_off ( ( protocol_flags3 & _BV(2) ) ==0 )
#define DISABLE_TELEM_off protocol_flags3 &= ~_BV(3)
#define DISABLE_TELEM_on protocol_flags3 |= _BV(3)
#define IS_DISABLE_TELEM_on ( ( protocol_flags3 & _BV(3) ) !=0 )
#define IS_DISABLE_TELEM_off ( ( protocol_flags3 & _BV(3) ) ==0 )
// Failsafe
#define FAILSAFE_CHANNEL_HOLD 2047
#define FAILSAFE_CHANNEL_NOPULSES 0
//********************
//** Debug messages **
//********************
#if defined(STM32_BOARD) && (defined (DEBUG_SERIAL) || defined (ARDUINO_MULTI_DEBUG))
uint16_t debug_time=0;
#define debug(msg, ...) {char debug_buf[64]; sprintf(debug_buf, msg, ##__VA_ARGS__); Serial.write(debug_buf);}
#define debugln(msg, ...) {char debug_buf[64]; sprintf(debug_buf, msg "\r\n", ##__VA_ARGS__); Serial.write(debug_buf);}
#define debug_time(msg) { uint16_t debug_time_TCNT1=TCNT1; debug_time=debug_time_TCNT1-debug_time; debug(msg "%u", debug_time>>1); debug_time=debug_time_TCNT1; }
#define debugln_time(msg) { uint16_t debug_time_TCNT1=TCNT1; debug_time=debug_time_TCNT1-debug_time; debug(msg "%u\r\n", debug_time>>1); debug_time=debug_time_TCNT1; }
#else
#define debug(...) { }
#define debugln(...) { }
#define debugln_time(...) { }
#undef DEBUG_SERIAL
#endif
//********************
//*** Blink timing ***
//********************
#define BLINK_BIND_TIME 100
#define BLINK_SERIAL_TIME 500
#define BLINK_PPM_TIME 1000
#define BLINK_BAD_PROTO_TIME_HIGH 50
#define BLINK_BAD_PROTO_TIME_LOW 1000
#define BLINK_WAIT_BIND_TIME_HIGH 1000
#define BLINK_WAIT_BIND_TIME_LOW 100
#define BLINK_BANK_TIME_HIGH 50
#define BLINK_BANK_TIME_LOW 500
#define BLINK_BANK_REPEAT 1500
//*******************
//*** AUX flags ***
//*******************
#define GET_FLAG(ch, mask) ( ch ? mask : 0)
#define CH5_SW (Channel_AUX & _BV(0))
#define CH6_SW (Channel_AUX & _BV(1))
#define CH7_SW (Channel_AUX & _BV(2))
#define CH8_SW (Channel_AUX & _BV(3))
#define CH9_SW (Channel_AUX & _BV(4))
#define CH10_SW (Channel_AUX & _BV(5))
#define CH11_SW (Channel_AUX & _BV(6))
#define CH12_SW (Channel_AUX & _BV(7))
#define CH13_SW (Channel_data[CH13]>CHANNEL_SWITCH)
#define CH14_SW (Channel_data[CH14]>CHANNEL_SWITCH)
#define CH15_SW (Channel_data[CH15]>CHANNEL_SWITCH)
#define CH16_SW (Channel_data[CH16]>CHANNEL_SWITCH)
//************************
//*** Power settings ***
//************************
enum {
TXPOWER_100uW,
TXPOWER_300uW,
TXPOWER_1mW,
TXPOWER_3mW,
TXPOWER_10mW,
TXPOWER_30mW,
TXPOWER_100mW,
TXPOWER_150mW
};
// A7105 power
// Power amp is ~+16dBm so:
enum A7105_POWER
{
A7105_POWER_0 = 0x00<<3 | 0x00, // TXPOWER_100uW = -23dBm == PAC=0 TBG=0
A7105_POWER_1 = 0x00<<3 | 0x01, // TXPOWER_300uW = -20dBm == PAC=0 TBG=1
A7105_POWER_2 = 0x00<<3 | 0x02, // TXPOWER_1mW = -16dBm == PAC=0 TBG=2
A7105_POWER_3 = 0x00<<3 | 0x04, // TXPOWER_3mW = -11dBm == PAC=0 TBG=4
A7105_POWER_4 = 0x01<<3 | 0x05, // TXPOWER_10mW = -6dBm == PAC=1 TBG=5
A7105_POWER_5 = 0x02<<3 | 0x07, // TXPOWER_30mW = 0dBm == PAC=2 TBG=7
A7105_POWER_6 = 0x03<<3 | 0x07, // TXPOWER_100mW = 1dBm == PAC=3 TBG=7
A7105_POWER_7 = 0x03<<3 | 0x07 // TXPOWER_150mW = 1dBm == PAC=3 TBG=7
};
#define A7105_HIGH_POWER A7105_POWER_7
#define A7105_LOW_POWER A7105_POWER_3
#define A7105_RANGE_POWER A7105_POWER_0
#define A7105_BIND_POWER A7105_POWER_0
// NRF Power
// Power setting is 0..3 for nRF24L01
// Claimed power amp for nRF24L01 from eBay is 20dBm.
enum NRF_POWER
{ // Raw w 20dBm PA
NRF_POWER_0 = 0x00, // 0 : -18dBm (16uW) 2dBm (1.6mW)
NRF_POWER_1 = 0x01, // 1 : -12dBm (60uW) 8dBm (6mW)
NRF_POWER_2 = 0x02, // 2 : -6dBm (250uW) 14dBm (25mW)
NRF_POWER_3 = 0x03 // 3 : 0dBm (1mW) 20dBm (100mW)
};
#define NRF_HIGH_POWER NRF_POWER_3
#define NRF_LOW_POWER NRF_POWER_1
#define NRF_RANGE_POWER NRF_POWER_0
#define NRF_BIND_POWER NRF_POWER_0
// CC2500 power output from the chip itself
// The numbers do not take into account any outside amplifier
enum CC2500_POWER
{
CC2500_POWER_0 = 0x00, // -55dbm or less
CC2500_POWER_1 = 0x50, // -30dbm
CC2500_POWER_2 = 0x44, // -28dbm
CC2500_POWER_3 = 0xC0, // -26dbm
CC2500_POWER_4 = 0x84, // -24dbm
CC2500_POWER_5 = 0x81, // -22dbm
CC2500_POWER_6 = 0x46, // -20dbm
CC2500_POWER_7 = 0x93, // -18dbm
CC2500_POWER_8 = 0x55, // -16dbm
CC2500_POWER_9 = 0x8D, // -14dbm
CC2500_POWER_10 = 0xC6, // -12dbm
CC2500_POWER_11 = 0x97, // -10dbm
CC2500_POWER_12 = 0x6E, // -8dbm
CC2500_POWER_13 = 0x7F, // -6dbm
CC2500_POWER_14 = 0xA9, // -4dbm
CC2500_POWER_15 = 0xBB, // -2dbm
CC2500_POWER_16 = 0xFE, // 0dbm
CC2500_POWER_17 = 0xFF // +1dbm
};
#define CC2500_HIGH_POWER CC2500_POWER_17
#define CC2500_LOW_POWER CC2500_POWER_13
#define CC2500_RANGE_POWER CC2500_POWER_1
#define CC2500_BIND_POWER CC2500_POWER_1
// CYRF power
enum CYRF_POWER
{
CYRF_POWER_0 = 0x00, // -35dbm
CYRF_POWER_1 = 0x01, // -30dbm
CYRF_POWER_2 = 0x02, // -24dbm
CYRF_POWER_3 = 0x03, // -18dbm
CYRF_POWER_4 = 0x04, // -13dbm
CYRF_POWER_5 = 0x05, // -5dbm
CYRF_POWER_6 = 0x06, // 0dbm
CYRF_POWER_7 = 0x07 // +4dbm
};
#define CYRF_HIGH_POWER CYRF_POWER_7
#define CYRF_LOW_POWER CYRF_POWER_3
#define CYRF_RANGE_POWER CYRF_POWER_1 // 1/30 of the full power distance
#define CYRF_BIND_POWER CYRF_POWER_0
enum TXRX_State {
TXRX_OFF,
TX_EN,
RX_EN
};
// Packet ack status values
enum {
PKT_PENDING = 0,
PKT_ACKED,
PKT_TIMEOUT
};
// baudrate defines for serial
#define SPEED_100K 0
#define SPEED_9600 1
#define SPEED_57600 2
#define SPEED_125K 3
/** EEPROM Layout */
#define EEPROM_ID_OFFSET 10 // Module ID (4 bytes)
#define EEPROM_BANK_OFFSET 15 // Current bank number (1 byte)
#define EEPROM_ID_VALID_OFFSET 20 // 1 byte flag that ID is valid
#define MODELMODE_EEPROM_OFFSET 30 // Autobind mode, 1 byte per model, end is 30+16=46
#define AFHDS2A_EEPROM_OFFSET 50 // RX ID, 4 bytes per model id, end is 50+64=114
#define BUGS_EEPROM_OFFSET 114 // RX ID, 2 bytes per model id, end is 114+32=146
#define BUGSMINI_EEPROM_OFFSET 146 // RX ID, 2 bytes per model id, end is 146+32=178
#define FRSKY_RX_EEPROM_OFFSET 178 // (1) format + (3) TX ID + (1) freq_tune + (47) channels, 52 bytes, end is 178+52=230
#define AFHDS2A_RX_EEPROM_OFFSET 230 // (4) TX ID + (16) channels, 20 bytes, end is 230+20=250
#define AFHDS2A_EEPROM_OFFSET2 250 // RX ID, 4 bytes per model id, end is 250+192=442
#define HOTT_EEPROM_OFFSET 442 // RX ID, 5 bytes per model id, end is 320+442=762
#define BAYANG_RX_EEPROM_OFFSET 762 // (5) TX ID + (4) channels, 9 bytes, end is 771
//#define CONFIG_EEPROM_OFFSET 771 // Current configuration of the multimodule
//****************************************
//*** MULTI protocol serial definition ***
//****************************************
/*
***************************
16 channels serial protocol
***************************
Serial: 100000 Baud 8e2 _ xxxx xxxx p --
Total of 26 bytes for protocol V1, variable length 27..36 for protocol V2
Stream[0] = header
0x55 sub_protocol values are 0..31 Stream contains channels
0x54 sub_protocol values are 32..63 Stream contains channels
0x57 sub_protocol values are 0..31 Stream contains failsafe
0x56 sub_protocol values are 32..63 Stream contains failsafe
Stream[1] = sub_protocol|BindBit|RangeCheckBit|AutoBindBit;
sub_protocol is 0..31 (bits 0..4), value should be added with 32 if Stream[0] = 0x54 | 0x56
Reserved 0
Flysky 1
Hubsan 2
FrskyD 3
Hisky 4
V2x2 5
DSM 6
Devo 7
YD717 8
KN 9
SymaX 10
SLT 11
CX10 12
CG023 13
Bayang 14
FrskyX 15
ESky 16
MT99XX 17
MJXQ 18
SHENQI 19
FY326 20
SFHSS 21
J6PRO 22
FQ777 23
ASSAN 24
FrskyV 25
HONTAI 26
OpenLRS 27
AFHDS2A 28
Q2X2 29
WK2x01 30
Q303 31
GW008 32
DM002 33
CABELL 34
ESKY150 35
H8_3D 36
CORONA 37
CFlie 38
Hitec 39
WFLY 40
BUGS 41
BUGSMINI 42
TRAXXAS 43
NCC1701 44
E01X 45
V911S 46
GD00X 47
V761 48
KF606 49
REDPINE 50
POTENSIC 51
ZSX 52
FLYZONE 53
SCANNER 54
FRSKY_RX 55
AFHDS2A_RX 56
HOTT 57
FX816 58
BAYANG_RX 59
PELIKAN 60
TIGER 61
XK 62
XN297DUMP 63
FRSKYX2 64
FRSKY_R9 65
BindBit=> 0x80 1=Bind/0=No
AutoBindBit=> 0x40 1=Yes /0=No
RangeCheck=> 0x20 1=Yes /0=No
Stream[2] = RxNum | Power | Type;
RxNum value is 0..15 (bits 0..3)
Type is 0..7 <<4 (bit 4..6)
sub_protocol==Flysky
Flysky 0
V9x9 1
V6x6 2
V912 3
CX20 4
sub_protocol==Hubsan
H107 0
H301 1
H501 2
sub_protocol==Hisky
Hisky 0
HK310 1
sub_protocol==DSM
DSM2_22 0
DSM2_11 1
DSMX_22 2
DSMX_11 3
DSM_AUTO 4
sub_protocol==YD717
YD717 0
SKYWLKR 1
SYMAX4 2
XINXUN 3
NIHUI 4
sub_protocol==KN
WLTOYS 0
FEILUN 1
sub_protocol==SYMAX
SYMAX 0
SYMAX5C 1
sub_protocol==CX10
CX10_GREEN 0
CX10_BLUE 1 // also compatible with CX10-A, CX12
DM007 2
--- 3
JC3015_1 4
JC3015_2 5
MK33041 6
sub_protocol==Q2X2
Q222 0
Q242 1
Q282 2
sub_protocol==CG023
CG023 0
YD829 1
sub_protocol==BAYANG
BAYANG 0
H8S3D 1
X16_AH 2
IRDRONE 3
DHD_D4 4
sub_protocol==MT99XX
MT99 0
H7 1
YZ 2
LS 3
FY805 4
sub_protocol==MJXQ
WLH08 0
X600 1
X800 2
H26D 3
E010 4
H26WH 5
PHOENIX 6
sub_protocol==FRSKYX
CH_16 0
CH_8 1
EU_16 2
EU_8 3
sub_protocol==HONTAI
HONTAI 0
JJRCX1 1
X5C1 2
FQ777_951 3
sub_protocol==AFHDS2A
PWM_IBUS 0
PPM_IBUS 1
PWM_SBUS 2
PPM_SBUS 3
sub_protocol==V2X2
V2X2 0
JXD506 1
sub_protocol==FY326
FY326 0
FY319 1
sub_protocol==WK2x01
WK2801 0
WK2401 1
W6_5_1 2
W6_6_1 3
W6_HEL 4
W6_HEL_I 5
sub_protocol==Q303
Q303 0
CX35 1
CX10D 2
CX10WD 3
sub_protocol==CABELL
CABELL_V3 0
CABELL_V3_TELEMETRY 1
CABELL_SET_FAIL_SAFE 6
CABELL_UNBIND 7
sub_protocol==H8_3D
H8_3D 0
H20H 1
H20MINI 2
H30MINI 3
sub_protocol==CORONA
COR_V1 0
COR_V2 1
FD_V3 2
sub_protocol==HITEC
OPT_FW 0
OPT_HUB 1
MINIMA 2
sub_protocol==SLT
SLT_V1 0
SLT_V2 1
Q100 2
Q200 3
MR100 4
sub_protocol==E01X
E012 0
E015 1
E016H 2
sub_protocol==GD00X
GD_V1 0
GD_V2 1
sub_protocol==REDPINE
RED_FAST 0
RED_SLOW 1
sub_protocol==TRAXXAS
RX6519 0
sub_protocol==ESKY150
ESKY150_4CH 0
ESKY150_7CH 1
sub_protocol==V911S
V911S_STD 0
V911S_E119 1
sub_protocol==XK
X450 0
X420 1
sub_protocol==FRSKY_R9
R9_915 0
R9_868 1
R9_915_8CH 2
R9_868_8CH 3
sub_protocol==ESKY
ESKY_STD 0
ESKY_ET4 1
Power value => 0x80 0=High/1=Low
Stream[3] = option_protocol;
option_protocol value is -128..127
Stream[4] to [25] = Channels or failsafe depending on Steam[0]
16 Channels on 11 bits (0..2047)
0 -125%
204 -100%
1024 0%
1843 +100%
2047 +125%
Values are concatenated to fit in 22 bytes like in SBUS protocol.
Failsafe values have exactly the same range/values than normal channels except the extremes where
0=no pulse, 2047=hold. If failsafe is not set or RX then failsafe packets should not be sent.
Stream[26] = sub_protocol bits 6 & 7|RxNum bits 4 & 5|Telemetry_Invert 3|Future_Use 2|Disable_Telemetry 1|Disable_CH_Mapping 0
sub_protocol is 0..255 (bits 0..5 + bits 6..7)
RxNum value is 0..63 (bits 0..3 + bits 4..5)
Telemetry_Invert => 0x08 0=normal, 1=invert
Future_Use => 0x04 0= , 1=
Disable_Telemetry => 0x02 0=enable, 1=disable
Disable_CH_Mapping => 0x01 0=enable, 1=disable
Stream[27.. 35] = between 0 and 9 bytes for additional protocol data
*/
/*
Multimodule Status
Based on #define MULTI_STATUS
Serial: 100000 Baud 8e2 (same as input)
Format: header (2 bytes) + data (variable)
[0] = 'M' (0x4d)
[1] Length (excluding the 2 header bytes)
[2-xx] data
Type = 0x01 Multimodule Status:
[2] Flags
0x01 = Input signal detected
0x02 = Serial mode enabled
0x04 = Protocol is valid
0x08 = Module is in binding mode
0x10 = Module waits a bind event to load the protocol
0x20 = Current protocol supports failsafe
0x40 = Current protocol supports disable channel mapping
0x80 = Data buffer is almost full
[3] major
[4] minor
[5] revision
[6] patchlevel,
version of multi code, should be displayed as major.minor.revision.patchlevel
*/
/*
Multiprotocol telemetry/command definition for OpenTX
Based on #define MULTI_TELEMETRY enables OpenTX to get the multimodule status and select the correct telemetry type automatically.
Serial: 100000 Baud 8e2 (same as input)
TLV Protocol (type, length, value), allows a TX to ignore unknown messages
Format: header (4 byte) + data (variable)
[0] = 'M' (0x4d)
[1] = 'P' (0x50)
The first byte is deliberatly chosen to be different from other telemetry protocols
(e.g. 0xAA for DSM/Multi, 0xAA for FlySky and 0x7e for Frsky) to allow a TX to detect
the telemetry format of older versions
[2] Type (see below)
[3] Length (excluding the 4 header bytes)
[4-xx] data
Commands from TX to multi cannot be longer than 22 bytes (RXLen -4byte header)
Type = 0x01 Multimodule Status:
[4] Flags
0x01 = Input signal detected
0x02 = Serial mode enabled
0x04 = Protocol is valid
0x08 = Module is in binding mode
0x10 = Module waits a bind event to load the protocol
0x20 = Current protocol supports failsafe
0x40 = Current protocol supports disable channel mapping
0x80 = Data buffer is almost full
[5] major
[6] minor
[7] revision
[8] patchlevel
version of multi code, should be displayed as major.minor.revision.patchlevel
[9] channel order: CH4|CH3|CH2|CH1 with CHx value A=0,E=1,T=2,R=3
[10] Next valid protocol number, can be used to skip invalid protocols
[11] Prev valid protocol number, can be used to skip invalid protocols
[12..18] Protocol name [7], not null terminated if prototcol len == 7
[19>>4] Option text to be displayed:
OPTION_NONE 0
OPTION_OPTION 1
OPTION_RFTUNE 2
OPTION_VIDFREQ 3
OPTION_FIXEDID 4
OPTION_TELEM 5
OPTION_SRVFREQ 6
OPTION_MAXTHR 7
OPTION_RFCHAN 8
[19&0x0F] Number of sub protocols
[20..27] Sub protocol name [8], not null terminated if sub prototcol len == 8
more information can be added by specifing a longer length of the type, the TX will just ignore these bytes
Type 0x02 Frksy S.port telemetry
Type 0x03 Frsky Hub telemetry
*No* usual frsky byte stuffing and without start/stop byte (0x7e)
Type 0x04 Spektrum telemetry data
data[0] TX RSSI
data[1-15] telemetry data
Type 0x05 DSM bind data
data[0-16] DSM bind data
technically DSM bind data is only 10 bytes but multi sends 16
like with telemtery, check length field)
Type 0x06 Flysky AFHDS2 telemetry data type 0xAA
length: 29
data[0] = RSSI value
data[1-28] telemetry data
Type 0x08 Input synchronisation
Informs the TX about desired rate and current delay
length: 4
data[0-1] Desired refresh rate in ??s
data[2-3] Time (??s) between last serial servo input received and servo input needed (lateness), TX should adjust its
sending time to minimise this value.
data[4] Interval of this message in ms
data[5] Input delay target in 10??s
Note that there are protocols (AFHDS2A) that have a refresh rate that is smaller than the maximum achievable
refresh rate via the serial protocol, in this case, the TX should double the rate and also subract this
refresh rate from the input lag if the input lag is more than the desired refresh rate.
The remote should try to get to zero of (inputdelay+target*10).
Type 0x0A Hitec telemetry data
length: 8
data[0] = TX RSSI value
data[1] = TX LQI value
data[2] = frame number
data[3-7] telemetry data
Full description at the bottom of Hitec_cc2500.ino
Type 0x0B Spectrum Scanner telemetry data
length: 6
data[0] = start channel (2400 + x*0.333 Mhz)
data[1-5] power levels
Type 0x0C Flysky AFHDS2 telemetry data type 0xAC
length: 29
data[0] = RSSI value
data[1-28] telemetry data
Type 0x0D RX channels forwarding
length: variable
data[0] = received packets per second
data[1] = rssi
data[2] = start channel
data[3] = number of channels to follow
data[4-]= packed channels data, 11 bit per channel
Type 0x0E HoTT telemetry
length: 14
data[0] = TX_RSSI
data[1] = TX_LQI
data[2] = type
data[3] = page
data[4-13] = data
*/
Reference in New Issue View Git Blame Copy Permalink