mirror of
https://github.com/pascallanger/DIY-Multiprotocol-TX-Module.git
synced 2025-02-04 16:48:10 +00:00
323 lines
8.7 KiB
C++
323 lines
8.7 KiB
C++
/* **************************
|
|
* By Midelic on RCGroups *
|
|
**************************
|
|
This project is free software: you can redistribute it and/or modify
|
|
it under the terms of the GNU General Public License as published by
|
|
the Free Software Foundation, either version 3 of the License, or
|
|
(at your option) any later version.
|
|
|
|
Multiprotocol is distributed in the hope that it will be useful,
|
|
but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
GNU General Public License for more details.
|
|
|
|
You should have received a copy of the GNU General Public License
|
|
along with Multiprotocol. If not, see <http://www.gnu.org/licenses/>.
|
|
*/
|
|
|
|
#if defined(FRSKYX_CC2500_INO)
|
|
|
|
#include "iface_cc2500.h"
|
|
|
|
uint8_t FrSkyX_chanskip;
|
|
uint8_t FrSkyX_TX_Seq ;
|
|
uint8_t FrSkyX_RX_Seq ;
|
|
|
|
#define FrSkyX_FAILSAFE_TIMEOUT 1032
|
|
|
|
static void __attribute__((unused)) FrSkyX_set_start(uint8_t ch )
|
|
{
|
|
CC2500_Strobe(CC2500_SIDLE);
|
|
CC2500_WriteReg(CC2500_25_FSCAL1, calData[ch]);
|
|
CC2500_WriteReg(CC2500_0A_CHANNR, hopping_frequency[ch]);
|
|
}
|
|
|
|
static void __attribute__((unused)) FrSkyX_init()
|
|
{
|
|
FRSKY_init_cc2500((sub_protocol&2)?FRSKYXEU_cc2500_conf:FRSKYX_cc2500_conf); // LBT or FCC
|
|
//
|
|
for(uint8_t c=0;c < 48;c++)
|
|
{//calibrate hop channels
|
|
CC2500_Strobe(CC2500_SIDLE);
|
|
CC2500_WriteReg(CC2500_0A_CHANNR,hopping_frequency[c]);
|
|
CC2500_Strobe(CC2500_SCAL);
|
|
delayMicroseconds(900);//
|
|
calData[c] = CC2500_ReadReg(CC2500_25_FSCAL1);
|
|
}
|
|
//#######END INIT########
|
|
}
|
|
|
|
static void __attribute__((unused)) FrSkyX_initialize_data(uint8_t adr)
|
|
{
|
|
CC2500_WriteReg(CC2500_0C_FSCTRL0,option); // Frequency offset hack
|
|
CC2500_WriteReg(CC2500_18_MCSM0, 0x8);
|
|
CC2500_WriteReg(CC2500_09_ADDR, adr ? 0x03 : rx_tx_addr[3]);
|
|
CC2500_WriteReg(CC2500_07_PKTCTRL1,0x05);
|
|
}
|
|
|
|
static void __attribute__((unused)) FrSkyX_build_bind_packet()
|
|
{
|
|
packet[0] = (sub_protocol & 2 ) ? 0x20 : 0x1D ; // LBT or FCC
|
|
packet[1] = 0x03;
|
|
packet[2] = 0x01;
|
|
//
|
|
packet[3] = rx_tx_addr[3];
|
|
packet[4] = rx_tx_addr[2];
|
|
int idx = ((state -FRSKY_BIND) % 10) * 5;
|
|
packet[5] = idx;
|
|
packet[6] = hopping_frequency[idx++];
|
|
packet[7] = hopping_frequency[idx++];
|
|
packet[8] = hopping_frequency[idx++];
|
|
packet[9] = hopping_frequency[idx++];
|
|
packet[10] = hopping_frequency[idx++];
|
|
packet[11] = 0x02;
|
|
packet[12] = RX_num;
|
|
//
|
|
uint8_t limit = (sub_protocol & 2 ) ? 31 : 28 ;
|
|
memset(&packet[13], 0, limit - 13);
|
|
uint16_t lcrc = FrSkyX_crc(&packet[3], limit-3);
|
|
//
|
|
packet[limit++] = lcrc >> 8;
|
|
packet[limit] = lcrc;
|
|
//
|
|
}
|
|
|
|
// 0-2047, 0 = 817, 1024 = 1500, 2047 = 2182
|
|
//64=860,1024=1500,1984=2140//Taranis 125%
|
|
static uint16_t __attribute__((unused)) FrSkyX_scaleForPXX( uint8_t i )
|
|
{ //mapped 860,2140(125%) range to 64,1984(PXX values);
|
|
uint16_t chan_val=convert_channel_frsky(i)-1226;
|
|
if(i>7) chan_val|=2048; // upper channels offset
|
|
return chan_val;
|
|
}
|
|
#ifdef FAILSAFE_ENABLE
|
|
static uint16_t __attribute__((unused)) FrSkyX_scaleForPXX_FS( uint8_t i )
|
|
{ //mapped 1,2046(125%) range to 64,1984(PXX values);
|
|
uint16_t chan_val=((Failsafe_data[i]*15)>>4)+64;
|
|
if(Failsafe_data[i]==FAILSAFE_CHANNEL_NOPULSES)
|
|
chan_val=FAILSAFE_CHANNEL_NOPULSES;
|
|
else if(Failsafe_data[i]==FAILSAFE_CHANNEL_HOLD)
|
|
chan_val=FAILSAFE_CHANNEL_HOLD;
|
|
if(i>7) chan_val|=2048; // upper channels offset
|
|
return chan_val;
|
|
}
|
|
#endif
|
|
|
|
#define FrSkyX_FAILSAFE_TIME 1032
|
|
static void __attribute__((unused)) FrSkyX_build_packet()
|
|
{
|
|
//0x1D 0xB3 0xFD 0x02 0x56 0x07 0x15 0x00 0x00 0x00 0x04 0x40 0x00 0x04 0x40 0x00 0x04 0x40 0x00 0x04 0x40 0x08 0x00 0x00 0x00 0x00 0x00 0x00 0x96 0x12
|
|
//
|
|
static uint8_t chan_offset=0;
|
|
uint16_t chan_0 ;
|
|
uint16_t chan_1 ;
|
|
//
|
|
// data frames sent every 9ms; failsafe every 9 seconds
|
|
#ifdef FAILSAFE_ENABLE
|
|
static uint16_t failsafe_count=0;
|
|
static uint8_t FS_flag=0,failsafe_chan=0;
|
|
if (FS_flag == 0 && failsafe_count > FrSkyX_FAILSAFE_TIME && chan_offset == 0 && IS_FAILSAFE_VALUES_on)
|
|
{
|
|
FS_flag = 0x10;
|
|
failsafe_chan = 0;
|
|
} else if (FS_flag & 0x10 && failsafe_chan < (sub_protocol & 0x01 ? 8-1:16-1))
|
|
{
|
|
FS_flag = 0x10 | ((FS_flag + 2) & 0x0F); //10, 12, 14, 16, 18, 1A, 1C, 1E - failsafe packet
|
|
failsafe_chan ++;
|
|
} else if (FS_flag & 0x10)
|
|
{
|
|
FS_flag = 0;
|
|
failsafe_count = 0;
|
|
}
|
|
failsafe_count++;
|
|
#endif
|
|
|
|
packet[0] = (sub_protocol & 0x02 ) ? 0x20 : 0x1D ; // LBT or FCC
|
|
packet[1] = rx_tx_addr[3];
|
|
packet[2] = rx_tx_addr[2];
|
|
packet[3] = 0x02;
|
|
//
|
|
packet[4] = (FrSkyX_chanskip<<6)|hopping_frequency_no;
|
|
packet[5] = FrSkyX_chanskip>>2;
|
|
packet[6] = RX_num;
|
|
//packet[7] = FLAGS 00 - standard packet
|
|
//10, 12, 14, 16, 18, 1A, 1C, 1E - failsafe packet
|
|
//20 - range check packet
|
|
#ifdef FAILSAFE_ENABLE
|
|
packet[7] = FS_flag;
|
|
#else
|
|
packet[7] = 0;
|
|
#endif
|
|
packet[8] = 0;
|
|
//
|
|
uint8_t startChan = chan_offset;
|
|
for(uint8_t i = 0; i <12 ; i+=3)
|
|
{//12 bytes of channel data
|
|
#ifdef FAILSAFE_ENABLE
|
|
if( (FS_flag & 0x10) && ((failsafe_chan & 0x07) == (startChan & 0x07)) )
|
|
chan_0 = FrSkyX_scaleForPXX_FS(failsafe_chan);
|
|
else
|
|
#endif
|
|
chan_0 = FrSkyX_scaleForPXX(startChan);
|
|
startChan++;
|
|
//
|
|
#ifdef FAILSAFE_ENABLE
|
|
if( (FS_flag & 0x10) && ((failsafe_chan & 0x07) == (startChan & 0x07)) )
|
|
chan_1 = FrSkyX_scaleForPXX_FS(failsafe_chan);
|
|
else
|
|
#endif
|
|
chan_1 = FrSkyX_scaleForPXX(startChan);
|
|
startChan++;
|
|
//
|
|
packet[9+i] = lowByte(chan_0); //3 bytes*4
|
|
packet[9+i+1]=(((chan_0>>8) & 0x0F)|(chan_1 << 4));
|
|
packet[9+i+2]=chan_1>>4;
|
|
}
|
|
if(sub_protocol & 0x01 ) // in X8 mode send only 8ch every 9ms
|
|
chan_offset = 0 ;
|
|
else
|
|
chan_offset^=0x08;
|
|
|
|
//sequence
|
|
packet[21] = (FrSkyX_RX_Seq << 4) | FrSkyX_TX_Seq ;//=8 at startup
|
|
|
|
uint8_t limit = (sub_protocol & 2 ) ? 31 : 28 ;
|
|
for (uint8_t i=22;i<limit;i++)
|
|
packet[i]=0;
|
|
#ifdef SPORT_SEND
|
|
uint8_t nbr_bytes=0;
|
|
for (uint8_t i=23;i<limit;i++)
|
|
{
|
|
if(SportHead==SportTail)
|
|
break; //buffer empty
|
|
packet[i]=SportData[SportHead];
|
|
SportHead=(SportHead+1) & (MAX_SPORT_BUFFER-1);
|
|
nbr_bytes++;
|
|
}
|
|
packet[22]=nbr_bytes;
|
|
if(nbr_bytes)
|
|
{
|
|
debug("SPort_out: ");
|
|
for(uint8_t i=0;i<nbr_bytes;i++)
|
|
debug("%02X ",packet[23+i]);
|
|
debugln("");
|
|
}
|
|
#endif // SPORT_SEND
|
|
|
|
uint16_t lcrc = FrSkyX_crc(&packet[3], limit-3);
|
|
packet[limit++]=lcrc>>8;//high byte
|
|
packet[limit]=lcrc;//low byte
|
|
}
|
|
|
|
uint16_t ReadFrSkyX()
|
|
{
|
|
switch(state)
|
|
{
|
|
default:
|
|
FrSkyX_set_start(47);
|
|
CC2500_SetPower();
|
|
CC2500_Strobe(CC2500_SFRX);
|
|
//
|
|
FrSkyX_build_bind_packet();
|
|
CC2500_Strobe(CC2500_SIDLE);
|
|
CC2500_WriteData(packet, packet[0]+1);
|
|
if(IS_BIND_DONE)
|
|
state = FRSKY_BIND_DONE;
|
|
else
|
|
state++;
|
|
return 9000;
|
|
case FRSKY_BIND_DONE:
|
|
FrSkyX_initialize_data(0);
|
|
hopping_frequency_no=0;
|
|
BIND_DONE;
|
|
state++;
|
|
break;
|
|
case FRSKY_DATA1:
|
|
if ( prev_option != option )
|
|
{
|
|
CC2500_WriteReg(CC2500_0C_FSCTRL0,option); // Frequency offset hack
|
|
prev_option = option ;
|
|
}
|
|
CC2500_SetTxRxMode(TX_EN);
|
|
FrSkyX_set_start(hopping_frequency_no);
|
|
CC2500_SetPower();
|
|
CC2500_Strobe(CC2500_SFRX);
|
|
hopping_frequency_no = (hopping_frequency_no+FrSkyX_chanskip)%47;
|
|
CC2500_Strobe(CC2500_SIDLE);
|
|
CC2500_WriteData(packet, packet[0]+1);
|
|
state++;
|
|
return 5200;
|
|
case FRSKY_DATA2:
|
|
CC2500_SetTxRxMode(RX_EN);
|
|
CC2500_Strobe(CC2500_SIDLE);
|
|
state++;
|
|
return 200;
|
|
case FRSKY_DATA3:
|
|
CC2500_Strobe(CC2500_SRX);
|
|
state++;
|
|
return 3100;
|
|
case FRSKY_DATA4:
|
|
len = CC2500_ReadReg(CC2500_3B_RXBYTES | CC2500_READ_BURST) & 0x7F;
|
|
if (len && (len<=(0x0E + 3))) //Telemetry frame is 17
|
|
{
|
|
packet_count=0;
|
|
CC2500_ReadData(packet_in, len);
|
|
#if defined TELEMETRY
|
|
frsky_check_telemetry(packet_in,len); //check if valid telemetry packets
|
|
//parse telemetry packets here
|
|
//The same telemetry function used by FrSky(D8).
|
|
#endif
|
|
}
|
|
else
|
|
{
|
|
packet_count++;
|
|
// restart sequence on missed packet - might need count or timeout instead of one missed
|
|
if(packet_count>100)
|
|
{//~1sec
|
|
FrSkyX_TX_Seq = 0x08 ;
|
|
//FrSkyX_RX_Seq = 0 ;
|
|
packet_count=0;
|
|
#if defined TELEMETRY
|
|
telemetry_lost=1;
|
|
#endif
|
|
}
|
|
CC2500_Strobe(CC2500_SFRX); //flush the RXFIFO
|
|
}
|
|
FrSkyX_build_packet();
|
|
if ( FrSkyX_TX_Seq != 0x08 )
|
|
FrSkyX_TX_Seq = ( FrSkyX_TX_Seq + 1 ) & 0x03 ;
|
|
state = FRSKY_DATA1;
|
|
return 500;
|
|
}
|
|
return 1;
|
|
}
|
|
|
|
uint16_t initFrSkyX()
|
|
{
|
|
set_rx_tx_addr(MProtocol_id_master);
|
|
Frsky_init_hop();
|
|
packet_count=0;
|
|
while(!FrSkyX_chanskip)
|
|
FrSkyX_chanskip=random(0xfefefefe)%47;
|
|
|
|
//for test***************
|
|
//rx_tx_addr[3]=0xB3;
|
|
//rx_tx_addr[2]=0xFD;
|
|
//************************
|
|
FrSkyX_init();
|
|
|
|
if(IS_BIND_IN_PROGRESS)
|
|
{
|
|
state = FRSKY_BIND;
|
|
FrSkyX_initialize_data(1);
|
|
}
|
|
else
|
|
{
|
|
state = FRSKY_DATA1;
|
|
FrSkyX_initialize_data(0);
|
|
}
|
|
FrSkyX_TX_Seq = 0x08 ;
|
|
FrSkyX_RX_Seq = 0 ;
|
|
return 10000;
|
|
}
|
|
#endif |