gomaomao/DIY-Multiprotocol-TX-Module
1
0
Fork 0
mirror of https://github.com/pascallanger/DIY-Multiprotocol-TX-Module.git synced 2025-02-04 21:58:10 +00:00
Code Issues Projects Releases Wiki Activity
DIY-Multiprotocol-TX-Module/.travis.yml
Ben Lye 58665ea7a7 Bubble up errors in release builds
2020-01-17 21:37:16 +00:00

363 lines
18 KiB
YAML
Raw Blame History

dist: bionic
sudo: true
language: c
env:
global:
- IDE_VERSION=1.8.9
matrix:
- BOARD="multi4in1:avr:multiatmega328p:bootloader=none"
- BOARD="multi4in1:avr:multiatmega328p:bootloader=optiboot"
- BOARD="multi4in1:avr:multixmega32d4"
- BOARD="multi4in1:STM32F1:multistm32f103c:debug_option=none"
- BOARD="multi4in1:STM32F1:multistm32f103c:debug_option=native"
- BOARD="multi4in1:STM32F1:multistm32f103c:debug_option=ftdi"
notifications:
email: false
before_install:
# Fetch the tag information for the current branch
- git fetch origin --tags
# Publish the buildroot script folder
- chmod +x ${TRAVIS_BUILD_DIR}/buildroot/bin/*
- export PATH=${TRAVIS_BUILD_DIR}/buildroot/bin/:${PATH}
# Arduino IDE adds a lot of noise caused by network traffic; firewall it
- sudo iptables -P INPUT DROP
- sudo iptables -P FORWARD DROP
- sudo iptables -P OUTPUT ACCEPT
- sudo iptables -A INPUT -i lo -j ACCEPT
- sudo iptables -A OUTPUT -o lo -j ACCEPT
- sudo iptables -A INPUT -m conntrack --ctstate ESTABLISHED,RELATED -j ACCEPT
# Helper functions for the builds
- buildMulti() { start_fold config_diff; travis_time_start; git diff Multiprotocol/_Config.h; end_fold config_diff; exitcode=0; BUILDCMD="arduino --verify --board $BOARD Multiprotocol/Multiprotocol.ino --pref build.path=./build/"; echo $BUILDCMD; $BUILDCMD; if [ $? -ne 0 ]; then exitcode=1; fi; echo; return $exitcode; }
- buildProtocol() { exitcode=0; opt_disable $ALL_PROTOCOLS; opt_enable $1; buildMulti; if [ $? -ne 0 ]; then exitcode=1; fi; return $exitcode; }
- buildEachProtocol() { exitcodesum=0; for PROTOCOL in $ALL_PROTOCOLS ; do printf "\e[33;1mBuilding $PROTOCOL\e[0m"; buildProtocol $PROTOCOL; if [ $? -ne 0 ]; then exitcodesum=$((exitcodesum + 1)); fi; done; return $exitcodesum; }
- buildRFModule() { exitcode=0; opt_disable $ALL_RFMODULES; opt_enable $1; buildMulti; if [ $? -ne 0 ]; then exitcode=1; fi; return $exitcode; }
- buildEachRFModule() { exitcodesum=0; for RFMODULE in $ALL_RFMODULES; do printf "\e[33;1mBuilding $RFMODULE\e[0m"; buildRFModule $RFMODULE; if [ $? -ne 0 ]; then exitcodesum=$((exitcodesum + 1)); fi; done; return $exitcodesum; }
- buildDefault() { exitcode=0; printf "\n\e[33;1mBuilding default configuration\e[0m\n"; buildMulti; if [ $? -ne 0 ]; then exitcode=1; fi; return $exitcode; }
- buildSerialOnly() { exitcode=0; printf "\n\e[33;1mBuilding serial mode only\e[0m\n"; opt_disable ENABLE_PPM; opt_enable ENABLE_SERIAL; buildMulti; if [ $? -ne 0 ]; then exitcode=1; fi; return $exitcode; }
- buildPPMOnly() { exitcode=0; printf "\n\e[33;1mBuilding PPM mode only\e[0m\n"; opt_enable ENABLE_PPM; opt_disable ENABLE_SERIAL; buildMulti; if [ $? -ne 0 ]; then exitcode=1; fi; return $exitcode; }
# Function to build the release files - dependent on board type
- if [[ "$BOARD" == "multi4in1:avr:multixmega32d4" ]]; then
buildReleaseFiles(){
exitcode=0;
printf "\n\e[33;1mBuilding multi-orangerx-aetr-green-inv-v$MULTI_VERSION.bin\e[0m";
opt_enable $ALL_PROTOCOLS;
opt_disable ORANGE_TX_BLUE;
buildMulti;
exitcode=$((exitcode+$?));
mv build/Multiprotocol.ino.bin ./binaries/multi-orangerx-aetr-green-inv-v$MULTI_VERSION.bin;
printf "\n\e[33;1mBuilding multi-orangerx-aetr-blue-inv-v$MULTI_VERSION.bin\e[0m";
opt_enable ORANGE_TX_BLUE;
buildMulti;
exitcode=$((exitcode+$?));
mv build/Multiprotocol.ino.bin ./binaries/multi-orangerx-aetr-blue-inv-v$MULTI_VERSION.bin;
cp Multiprotocol/Multi.txt ./binaries/Multi.txt;
return $exitcode; };
elif [[ "$BOARD" == "multi4in1:avr:multiatmega328p:bootloader=none" ]]; then
buildReleaseFiles(){
printf "\n\e[33;1mBuilding multi-avr-usbasp-aetr-A7105-inv-v$MULTI_VERSION.bin\e[0m";
exitcode=0;
opt_disable CHECK_FOR_BOOTLOADER;
opt_disable $ALL_PROTOCOLS;
opt_enable $A7105_PROTOCOLS;
buildMulti;
exitcode=$((exitcode+$?));
mv build/Multiprotocol.ino.bin ./binaries/multi-avr-usbasp-aetr-A7105-inv-v$MULTI_VERSION.bin;
printf "\n\e[33;1mBuilding multi-avr-usbasp-aetr-CC2500-inv-v$MULTI_VERSION.bin\e[0m";
opt_disable $ALL_PROTOCOLS;
opt_enable $CC2500_PROTOCOLS;
buildMulti;
mv build/Multiprotocol.ino.bin ./binaries/multi-avr-usbasp-aetr-CC2500-inv-v$MULTI_VERSION.bin;
printf "\n\e[33;1mBuilding multi-avr-usbasp-aetr-CYRF6936-inv-v$MULTI_VERSION.bin\e[0m";
opt_disable $ALL_PROTOCOLS;
opt_enable $CYRF6936_PROTOCOLS;
buildMulti;
exitcode=$((exitcode+$?));
mv build/Multiprotocol.ino.bin ./binaries/multi-avr-usbasp-aetr-CYRF6936-inv-v$MULTI_VERSION.bin;
return $exitcode; };
elif [[ "$BOARD" == "multi4in1:avr:multiatmega328p:bootloader=optiboot" ]]; then
buildReleaseFiles(){
printf "\n\e[33;1mBuilding multi-avr-txflash-aetr-A7105-inv-v$MULTI_VERSION.bin\e[0m";
exitcode=0;
opt_enable CHECK_FOR_BOOTLOADER;
opt_disable $ALL_PROTOCOLS;
opt_enable $A7105_PROTOCOLS;
buildMulti;
exitcode=$((exitcode+$?));
mv build/Multiprotocol.ino.bin ./binaries/multi-avr-txflash-aetr-A7105-inv-v$MULTI_VERSION.bin;
printf "\n\e[33;1mBuilding multi-avr-txflash-aetr-CC2500-inv-v$MULTI_VERSION.bin\e[0m";
opt_disable $ALL_PROTOCOLS;
opt_enable $CC2500_PROTOCOLS;
buildMulti;
exitcode=$((exitcode+$?));
mv build/Multiprotocol.ino.bin ./binaries/multi-avr-txflash-aetr-CC2500-inv-v$MULTI_VERSION.bin;
printf "\n\e[33;1mBuilding multi-avr-txflash-aetr-CYRF6936-inv-v$MULTI_VERSION.bin\e[0m";
opt_disable $ALL_PROTOCOLS;
opt_enable $CYRF6936_PROTOCOLS;
buildMulti;
exitcode=$((exitcode+$?));
mv build/Multiprotocol.ino.bin ./binaries/multi-avr-txflash-aetr-CYRF6936-inv-v$MULTI_VERSION.bin;
return $exitcode; };
elif [[ "$BOARD" == "multi4in1:STM32F1:multistm32f103c:debug_option=none" ]]; then
buildReleaseFiles(){
printf "\n\e[33;1mBuilding multi-stm-erskytx-aetr-inv-v$MULTI_VERSION.bin\e[0m";
exitcode=0;
opt_enable CHECK_FOR_BOOTLOADER;
opt_enable $ALL_PROTOCOLS;
opt_enable MULTI_STATUS;
opt_disable MULTI_TELEMETRY;
buildMulti;
exitcode=$((exitcode+$?));
mv build/Multiprotocol.ino.bin ./binaries/multi-stm-erskytx-aetr-inv-v$MULTI_VERSION.bin;
printf "\n\e[33;1mBuilding multi-stm-erskytx-taer-inv-v$MULTI_VERSION.bin\e[0m";
opt_replace AETR TAER;
buildMulti;
exitcode=$((exitcode+$?));
mv build/Multiprotocol.ino.bin ./binaries/multi-stm-erskytx-taer-inv-v$MULTI_VERSION.bin;
printf "\n\e[33;1mBuilding multi-stm-erskytx-reta-inv-v$MULTI_VERSION.bin\e[0m";
opt_replace TAER RETA;
buildMulti;
exitcode=$((exitcode+$?));
mv build/Multiprotocol.ino.bin ./binaries/multi-stm-erskytx-reta-inv-v$MULTI_VERSION.bin;
printf "\n\e[33;1mBuilding multi-stm-erskytx-aetr-noinv-v$MULTI_VERSION.bin\e[0m";
opt_replace RETA AETR;
opt_disable INVERT_TELEMETRY;
buildMulti;
exitcode=$((exitcode+$?));
mv build/Multiprotocol.ino.bin ./binaries/multi-stm-erskytx-aetr-noinv-v$MULTI_VERSION.bin;
printf "\n\e[33;1mBuilding multi-stm-erskytx-taer-noinv-v$MULTI_VERSION.bin\e[0m";
opt_replace AETR TAER;
buildMulti;
exitcode=$((exitcode+$?));
mv build/Multiprotocol.ino.bin ./binaries/multi-stm-erskytx-taer-noinv-v$MULTI_VERSION.bin;
printf "\n\e[33;1mBuilding multi-stm-erskytx-reta-noinv-v$MULTI_VERSION.bin\e[0m";
opt_replace TAER RETA;
buildMulti;
exitcode=$((exitcode+$?));
mv build/Multiprotocol.ino.bin ./binaries/multi-stm-erskytx-reta-noinv-v$MULTI_VERSION.bin;
printf "\n\e[33;1mBuilding multi-stm-opentx-aetr-inv-v$MULTI_VERSION.bin\e[0m";
opt_replace RETA AETR;
opt_disable MULTI_STATUS;
opt_enable MULTI_TELEMETRY;
opt_enable INVERT_TELEMETRY;
buildMulti;
exitcode=$((exitcode+$?));
mv build/Multiprotocol.ino.bin ./binaries/multi-stm-opentx-aetr-inv-v$MULTI_VERSION.bin;
printf "\n\e[33;1mBuilding multi-stm-opentx-taer-inv-v$MULTI_VERSION.bin\e[0m";
opt_replace AETR TAER;
buildMulti;
exitcode=$((exitcode+$?));
mv build/Multiprotocol.ino.bin ./binaries/multi-stm-opentx-taer-inv-v$MULTI_VERSION.bin;
printf "\n\e[33;1mBuilding multi-stm-opentx-reta-inv-v$MULTI_VERSION.bin\e[0m";
opt_replace TAER RETA;
buildMulti;
exitcode=$((exitcode+$?));
mv build/Multiprotocol.ino.bin ./binaries/multi-stm-opentx-reta-inv-v$MULTI_VERSION.bin;
printf "\n\e[33;1mBuilding multi-stm-opentx-aetr-noinv-v$MULTI_VERSION.bin\e[0m";
opt_replace RETA AETR;
opt_disable INVERT_TELEMETRY;
buildMulti;
exitcode=$((exitcode+$?));
mv build/Multiprotocol.ino.bin ./binaries/multi-stm-opentx-aetr-noinv-v$MULTI_VERSION.bin;
printf "\n\e[33;1mBuilding multi-stm-opentx-taer-noinv-v$MULTI_VERSION.bin\e[0m";
opt_replace AETR TAER;
buildMulti;
exitcode=$((exitcode+$?));
mv build/Multiprotocol.ino.bin ./binaries/multi-stm-opentx-taer-noinv-v$MULTI_VERSION.bin;
printf "\n\e[33;1mBuilding multi-stm-opentx-reta-noinv-v$MULTI_VERSION.bin\e[0m";
opt_replace TAER RETA;
buildMulti;
exitcode=$((exitcode+$?));
mv build/Multiprotocol.ino.bin ./binaries/multi-stm-opentx-reta-noinv-v$MULTI_VERSION.bin;
printf "\n\e[33;1mBuilding multi-stm-ppm-aetr-noinv-v$MULTI_VERSION.bin\e[0m";
opt_replace RETA AETR;
opt_disable MULTI_STATUS;
opt_disable MULTI_TELEMETRY;
opt_set NBR_BANKS 5;
buildMulti;
exitcode=$((exitcode+$?));
mv build/Multiprotocol.ino.bin ./binaries/multi-stm-ppm-aetr-noinv-v$MULTI_VERSION.bin;
printf "\n\e[33;1mBuilding multi-stm-ppm-taer-noinv-v$MULTI_VERSION.bin\e[0m";
opt_replace AETR TAER;
buildMulti;
exitcode=$((exitcode+$?));
mv build/Multiprotocol.ino.bin ./binaries/multi-stm-ppm-taer-noinv-v$MULTI_VERSION.bin;
printf "\n\e[33;1mBuilding multi-stm-ppm-reta-noinv-v$MULTI_VERSION.bin\e[0m";
opt_replace TAER RETA;
buildMulti;
exitcode=$((exitcode+$?));
mv build/Multiprotocol.ino.bin ./binaries/multi-stm-ppm-reta-noinv-v$MULTI_VERSION.bin;
return $exitcode; };
elif [[ "$BOARD" == "multi4in1:STM32F1:multistm32f103c:debug_option=native" ]]; then
buildReleaseFiles(){
printf "\n\e[33;1mBuilding multi-stm-erskytx-xn297dump-inv-usbdebug-v$MULTI_VERSION.bin\e[0m";
exitcode=0;
opt_enable CHECK_FOR_BOOTLOADER;
opt_disable $ALL_PROTOCOLS;
opt_add XN297DUMP_NRF24L01_INO;
opt_enable MULTI_STATUS;
opt_disable MULTI_TELEMETRY;
opt_enable INVERT_TELEMETRY;
buildMulti;
exitcode=$((exitcode+$?));
mv build/Multiprotocol.ino.bin ./binaries/multi-stm-erskytx-xn297dump-inv-usbdebug-v$MULTI_VERSION.bin;
printf "\n\e[33;1mBuilding multi-stm-opentx-xn297dump-inv-usbdebug-v$MULTI_VERSION.bin\e[0m";
opt_disable $ALL_PROTOCOLS;
opt_disable MULTI_STATUS;
opt_enable MULTI_TELEMETRY;
opt_enable INVERT_TELEMETRY;
buildMulti;
exitcode=$((exitcode+$?));
mv build/Multiprotocol.ino.bin ./binaries/multi-stm-opentx-xn297dump-inv-usbdebug-v$MULTI_VERSION.bin;
return $exitcode; };
elif [[ "$BOARD" == "multi4in1:STM32F1:multistm32f103c:debug_option=ftdi" ]]; then
buildReleaseFiles(){
printf "\n\e[33;1mBuilding multi-stm-erskytx-xn297dump-inv-ftdidebug-v$MULTI_VERSION.bin\e[0m";
exitcode=0;
opt_enable CHECK_FOR_BOOTLOADER;
opt_disable $ALL_PROTOCOLS;
opt_add XN297DUMP_NRF24L01_INO;
opt_enable MULTI_STATUS;
opt_disable MULTI_TELEMETRY;
opt_enable INVERT_TELEMETRY;
buildMulti;
exitcode=$((exitcode+$?));
mv build/Multiprotocol.ino.bin ./binaries/multi-stm-erskytx-xn297dump-inv-ftdidebug-v$MULTI_VERSION.bin;
printf "\n\e[33;1mBuilding multi-stm-opentx-xn297dump-inv-ftdidebug-v$MULTI_VERSION.bin\e[0m";
opt_disable $ALL_PROTOCOLS;
opt_disable MULTI_STATUS;
opt_enable MULTI_TELEMETRY;
opt_enable INVERT_TELEMETRY;
buildMulti;
exitcode=$((exitcode+$?));
mv build/Multiprotocol.ino.bin ./binaries/multi-stm-opentx-xn297dump-inv-ftdidebug-v$MULTI_VERSION.bin;
return $exitcode; };
else
buildReleaseFiles() { echo "No release files for this board."; };
fi
install:
# Install Arduino IDE
- wget http://downloads.arduino.cc/arduino-$IDE_VERSION-linux64.tar.xz
- tar xf arduino-$IDE_VERSION-linux64.tar.xz
- mv arduino-$IDE_VERSION $HOME/arduino-ide
- export PATH=$PATH:$HOME/arduino-ide
# Set the Multi boards package URL
- arduino --pref "boardsmanager.additional.urls=https://raw.githubusercontent.com/pascallanger/DIY-Multiprotocol-TX-Module-Boards/master/package_multi_4in1_board_index.json" --save-prefs
# Install the STM32 board if needed
- if [[ "$BOARD" =~ "multi4in1:STM32F1:" ]]; then
arduino --install-boards multi4in1:STM32F1;
fi
# Install the AVR board if needed
- if [[ "$BOARD" =~ "multi4in1:avr:" ]]; then
arduino --install-boards multi4in1:avr;
fi
before_script:
# Change current working directory to the build dir
- cd ${TRAVIS_BUILD_DIR}
# Create somwhere to put the exported binaries
- mkdir ./binaries
# Log the initial Multi config
- cat Multiprotocol/_Config.h
# Back up the configuration
- cp Multiprotocol/_Config.h ./_Config.h.bak
# Get the firmware version number from the source
- MAJOR_VERSION=$(grep "VERSION_MAJOR" "Multiprotocol/Multiprotocol.h" | awk -v N=3 '{gsub(/\r/,""); print $N}')
- MINOR_VERSION=$(grep "VERSION_MINOR" "Multiprotocol/Multiprotocol.h" | awk -v N=3 '{gsub(/\r/,""); print $N}')
- REVISION_VERSION=$(grep "VERSION_REVISION" "Multiprotocol//Multiprotocol.h" | awk -v N=3 '{gsub(/\r/,""); print $N}')
- PATCH_VERSION=$(grep "VERSION_PATCH" "Multiprotocol//Multiprotocol.h" | awk -v N=3 '{gsub(/\r/,""); print $N}')
- MULTI_VERSION=$MAJOR_VERSION.$MINOR_VERSION.$REVISION_VERSION.$PATCH_VERSION
# Derive the Multi protocols from the Multi source
- A7105_PROTOCOLS=$(sed -n 's/[\/\/]*[[:blank:]]*#define[[:blank:]]*\([[:alnum:]_]*_A7105_INO\)\(.*\)/\1/p' Multiprotocol/_Config.h)
- CC2500_PROTOCOLS=$(sed -n 's/[\/\/]*[[:blank:]]*#define[[:blank:]]*\([[:alnum:]_]*_CC2500_INO\)\(.*\)/\1/p' Multiprotocol/_Config.h)
- CYRF6936_PROTOCOLS=$(sed -n 's/[\/\/]*[[:blank:]]*#define[[:blank:]]*\([[:alnum:]_]*_CYRF6936_INO\)\(.*\)/\1/p' Multiprotocol/_Config.h)
- NRF24L01_PROTOCOLS=$(sed -n 's/[\/\/]*[[:blank:]]*#define[[:blank:]]*\([[:alnum:]_]*_NRF24L01_INO\)\(.*\)/\1/p' Multiprotocol/_Config.h)
- if [[ "$BOARD" =~ "multi4in1:avr:multixmega32d4" ]]; then
ALL_PROTOCOLS=$(echo $CYRF6936_PROTOCOLS);
else
ALL_PROTOCOLS=$(echo $A7105_PROTOCOLS $CC2500_PROTOCOLS $CYRF6936_PROTOCOLS $NRF24L01_PROTOCOLS);
fi
- echo $ALL_PROTOCOLS
# Declare all the installed modules
- ALL_RFMODULES=$(echo A7105_INSTALLED CYRF6936_INSTALLED CC2500_INSTALLED NRF24L01_INSTALLED);
# Disable CHECK_FOR_BOOTLOADER when not needed
- if [[ "$BOARD" == "multi4in1:avr:multiatmega328p:bootloader=none" ]]; then
opt_disable CHECK_FOR_BOOTLOADER;
fi
# Trim the enabled protocols down for the STM32 board with debugging
- if [[ "$BOARD" == "multi4in1:STM32F1:multistm32f103c:debug_option=ftdi" ]] || [[ "$BOARD" == "multi4in1:STM32F1:multistm32f103c:debug_option=native" ]]; then
opt_disable $ALL_PROTOCOLS;
opt_enable FRSKYX_CC2500_INO AFHDS2A_A7105_INO MJXQ_NRF24L01_INO DSM_CYRF6936_INO;
fi
# Trim the enabled protocols down for the Atmega328p board
- if [[ "$BOARD" =~ "multi4in1:avr:multiatmega328p:" ]]; then
opt_disable $ALL_PROTOCOLS;
opt_enable FRSKYX_CC2500_INO AFHDS2A_A7105_INO MJXQ_NRF24L01_INO DSM_CYRF6936_INO;
fi
# Useful Travis functions
- export -f travis_fold
- export -f travis_nanoseconds
- export -f travis_time_start
- export -f travis_time_finish
- start_fold() { echo -e "travis_fold:start:$1"; }
- end_fold() { echo -e "\ntravis_fold:end:$1\r"; }
script:
# Build with default configuration - all protocols are enabled for STM32; a subset of protocols for Atmega or STM32 debugging
- buildDefault
# Serial only
- buildSerialOnly
# PPM only
- buildPPMOnly
# Re-enable PPM and serial
- opt_enable ENABLE_SERIAL
- opt_enable ENABLE_PPM
# Build for each RF module individually
- buildEachRFModule
# Restore the default configuration
- cp ./_Config.h.bak Multiprotocol/_Config.h
# Build each protocol individually
- buildEachProtocol
# Restore the default configuration
- cp ./_Config.h.bak Multiprotocol/_Config.h
# Builds the files for a release - always built, but only copied to Github if the test is tagged as a release
- buildReleaseFiles
deploy:
provider: releases
api_key:
secure: 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
skip_cleanup: true
file_glob: true
file: binaries/*
on:
tags: true
Reference in New Issue View Git Blame Copy Permalink