mirror of
https://github.com/pascallanger/DIY-Multiprotocol-TX-Module.git
synced 2025-02-04 21:58:10 +00:00
8.8 KiB
8.8 KiB
#Bill of Materials DIY STM32 Module
Here is the bill of materials for the STM32 version of the DIY MPTM. Carefully compare your board with the picture below to determine which version you have.
If you are looking for the BOM for the DIY ATmega328 3.2d version click here.
Digikey may not be your preferred supplier, but you should find enough information on their page to cross reference parts.
BOM DIY STM32 PCB - the first Version
This BOM is for the board that looks like this - check carefully:
| Qty | Part | Description | Value | Package | Digikey Part Number |
|---|---|---|---|---|---|
| 1 | 3.3VJumper | Jumper | 1x2 | 3M9467-ND | |
| 2 | C1,C2 | Cap Cera | 0.1uF | 0805 | 311-1361-1-ND |
| 3 | C3,8,9 | Cap Tantal | 22uF/16V | 1206 | 478-8254-1-ND |
| 1 | D1 | Diode Shottky | 1N5819 | 1N5819HW-FDICT-ND | |
| 1 | IC1 | Voltage reg 3.3V | AMS1117-33 | SOT223 | LM1117MPX-3.3/NOPBCT-ND |
| 1 | IC2 | Voltage reg 3.3V | AMS1117-50 | SOT223 | LM1117MP-5.0/NOPBCT-ND |
| 1 | J2 | Receptacle | 5-pin | WM14512-ND | |
| 1 | JP1 | Pin header | 1x3 | S1011EC-40-ND | |
| 1 | JP2 | Pin header | 1x4 | S1011EC-40-ND | |
| 1 | L1 | High Freq Inductor | 10uH | 1812 | CM453232-100KLCT-ND |
| 1 | LED | Red Led | LED3mm | ||
| 2 | R1,R8 | SMD Resistor | 2.2K | 0805 | RMCF0805JT2K20CT-ND |
| 3 | R2,R5,R10 | SMD Resistor | 10K | 0805 | RMCF0805JT10K0CT-ND |
| 1 | R3 | SMD Resistor | 4.7K | 0805 | 311-4.70KCRCT-ND |
| 1 | R5 | SMD Resistor | 1K | 0805 | 311-1.0KARCT-ND |
| 1 | R7 | SMD Resistor | 470 | 0805 | RMCF0805JT470RCT-ND |
| 1 | Switch | Hex Switch | 4-DIP | FR01KR16P-W-S-ND | |
| 1 | Switch | Momentary Switch | 6mm | 450-1643-ND | |
| 1 | MCU | STM32F103CBT6 | LQFP48 | STM32F103CBT6 | |
| 1 | U$1 | 4-in-1 RF Module | Banggood 4-in-1 Module | ||
| 1 | Y2 | 8mHz Resonator | 8mHz | 490-1195-1-ND | |
| 1 | U1 | Dual 2-INPUT-XOR | SN74LVC2G86DCTR | SSOP-8 | 296-13274-1-ND |
| 1 | U.FL | SMD ant. conn. | WM5587CT-ND |
BOM DIY STM32 PCB - the V0.8
This BOM is for the board that looks like this - check carefully:
| Qty | Part | Description | Value | Package | Digikey Part Number |
|---|---|---|---|---|---|
| 1 | SV201 | Jumper | 1x3 | S1011EC-40-ND | |
| 1 | J301 | Receptacle | 5-pin | WM14512-ND | |
| 1 | SV202 | Pin header | 1x4 | S1011EC-40-ND | |
| 1 | SV203 | Pin header | 1x4 | S1011EC-40-ND | |
| 1 | SV204 | Pin header | 1x3 | S1011EC-40-ND | |
| 3 | C101, 102, 103 | Cap Tantal | 22uF/16V | 1206 | 478-8254-1-ND |
| 7 | C201, 202, 204, 205, 206, 209, 301 | Cap Cera | 0.1uF | 0805 | 311-1361-1-ND |
| 1 | C203 | Cap Cera | 4u7 | 0805 | 311-1371-1-ND |
| 1 | C207 | Cap Cera | 1uF | 0805 | 311-1365-1-ND |
| 1 | C208 | Cap Cera | 1nF | 0805 | 311-1127-1-ND |
| 1 | D301, D302, D303 | Diode Shottky | BAT48 | 497-5711-1-ND | |
| 1 | IC101 | Voltage reg 5V | AMS1117-50 | SOT223 | LM1117MP-5.0/NOPBCT-ND |
| 1 | IC102 | Voltage reg 3.3V | AMS1117-33 | SOT223 | LM1117MPX-3.3/NOPBCT-ND |
| 1 | L101 | High Freq Inductor | 10uH | 1812 | CM453232-100KLCT-ND |
| 1 | LED101, LED102 | Red/Green Led | LED3mm | ||
| 2 | R302, R303 | SMD Resistor | 2.2K | 0805 | RMCF0805JT2K20CT-ND |
| 3 | R202, R203 | SMD Resistor | 10K | 0805 | RMCF0805JT10K0CT-ND |
| 1 | R301, R305 | SMD Resistor | 4.7K | 0805 | 311-4.70KCRCT-ND |
| 1 | R101, 201 | SMD Resistor | 1K | 0805 | 311-1.0KARCT-ND |
| 1 | R304 | SMD Resistor | 470 | 0805 | RMCF0805JT470RCT-ND |
| 1 | S201 | Hex Switch | 4-DIP | FR01KR16P-W-S-ND | |
| 1 | S202 | Momentary Switch | 6mm | 450-1643-ND | |
| 1 | IC201 | STM32F103CBT6 | LQFP48 | STM32F103CBT6 | |
| 1 | M401 | 4-in-1 RF Module | Banggood 4-in-1 Module | ||
| 1 | Y2 | 8mHz Resonator | 8mHz | 490-1195-1-ND | |
| 1 | U301 | Dual INPUT-XOR | SN74LVC2G86DCTR | SSOP-8 | 296-13257-1-ND |
| 1 | CON401 | SMD ant. conn. | WM5587CT-ND |