gomaomao/DIY-Multiprotocol-TX-Module
1
0
Fork 0
mirror of https://github.com/pascallanger/DIY-Multiprotocol-TX-Module.git synced 2025-02-04 18:38:13 +00:00
Code Issues Projects Releases Wiki Activity
DIY-Multiprotocol-TX-Module/Multiprotocol/Multiprotocol.h
pascallanger 73aab88109 Some cleanning
2016-09-20 18:27:09 +02:00

675 lines
17 KiB
C
Raw Blame History

This file contains ambiguous Unicode characters

This file contains Unicode characters that might be confused with other characters. If you think that this is intentional, you can safely ignore this warning. Use the Escape button to reveal them.

/*
This project is free software: you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation, either version 3 of the License, or
(at your option) any later version.
Multiprotocol is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with Multiprotocol. If not, see <http://www.gnu.org/licenses/>.
*/
// Check selected board type
#ifndef XMEGA
#if not defined(ARDUINO_AVR_PRO) && not defined(ARDUINO_AVR_MINI) && not defined(ARDUINO_AVR_NANO)
#error You must select the board type "Arduino Pro or Pro Mini" or "Arduino Mini"
#endif
#if F_CPU != 16000000L || not defined(__AVR_ATmega328P__)
#error You must select the processor type "ATmega328(5V, 16MHz)"
#endif
#endif
//******************
// Protocols
//******************
enum PROTOCOLS
{
MODE_SERIAL = 0, // Serial commands
MODE_FLYSKY = 1, // =>A7105
MODE_HUBSAN = 2, // =>A7105
MODE_FRSKYD = 3, // =>CC2500
MODE_HISKY = 4, // =>NRF24L01
MODE_V2X2 = 5, // =>NRF24L01
MODE_DSM = 6, // =>CYRF6936
MODE_DEVO = 7, // =>CYRF6936
MODE_YD717 = 8, // =>NRF24L01
MODE_KN = 9, // =>NRF24L01
MODE_SYMAX = 10, // =>NRF24L01
MODE_SLT = 11, // =>NRF24L01
MODE_CX10 = 12, // =>NRF24L01
MODE_CG023 = 13, // =>NRF24L01
MODE_BAYANG = 14, // =>NRF24L01
MODE_FRSKYX = 15, // =>CC2500
MODE_ESKY = 16, // =>NRF24L01
MODE_MT99XX = 17, // =>NRF24L01
MODE_MJXQ = 18, // =>NRF24L01
MODE_SHENQI = 19, // =>NRF24L01
MODE_FY326 = 20, // =>NRF24L01
MODE_SFHSS = 21, // =>CC2500
MODE_J6PRO = 22, // =>CYRF6936
MODE_FQ777 = 23, // =>NRF24L01
MODE_ASSAN = 24, // =>NRF24L01
MODE_FRSKYV = 25, // =>CC2500
MODE_HONTAI = 26, // =>NRF24L01
MODE_OPENLRS = 27, // =>OpenLRS hardware
};
enum Flysky
{
Flysky = 0,
V9X9 = 1,
V6X6 = 2,
V912 = 3
};
enum Hisky
{
Hisky = 0,
HK310 = 1
};
enum DSM
{
DSM2_22 = 0,
DSM2_11 = 1,
DSMX_22 = 2,
DSMX_11 = 3,
DSM_AUTO = 4
};
enum YD717
{
YD717 = 0,
SKYWLKR = 1,
SYMAX4 = 2,
XINXUN = 3,
NIHUI = 4
};
enum KN
{
WLTOYS = 0,
FEILUN = 1
};
enum SYMAX
{
SYMAX = 0,
SYMAX5C = 1
};
enum CX10
{
CX10_GREEN = 0,
CX10_BLUE = 1, // also compatible with CX10-A, CX12
DM007 = 2,
Q282 = 3,
JC3015_1 = 4,
JC3015_2 = 5,
MK33041 = 6,
Q242 = 7
};
enum CG023
{
CG023 = 0,
YD829 = 1,
H8_3D = 2
};
enum MT99XX
{
MT99 = 0,
H7 = 1,
YZ = 2,
LS = 3
};
enum MJXQ
{
WLH08 = 0,
X600 = 1,
X800 = 2,
H26D = 3,
E010 = 4
};
enum FRSKYX
{
CH_16 = 0,
CH_8 = 1,
};
enum HONTAI
{
FORMAT_HONTAI = 0,
FORMAT_JJRCX1 = 1,
FORMAT_X5C1 = 2
};
#define NONE 0
#define P_HIGH 1
#define P_LOW 0
#define AUTOBIND 1
#define NO_AUTOBIND 0
struct PPM_Parameters
{
uint8_t protocol : 6;
uint8_t sub_proto : 3;
uint8_t rx_num : 4;
uint8_t power : 1;
uint8_t autobind : 1;
uint8_t option;
};
//*******************
//*** Timer ***
//*******************
#ifdef XMEGA
#define TIFR1 TCC1.INTFLAGS
#define OCF1A_bm TC1_CCAIF_bm
#define OCR1A TCC1.CCA
#define TCNT1 TCC1.CNT
#define UDR0 USARTC0.DATA
#define OCF1B_bm TC1_CCBIF_bm
#define OCR1B TCC1.CCB
#define TIMSK1 TCC1.INTCTRLB
#define SET_TIMSK1_OCIE1B TIMSK1 = (TIMSK1 & 0xF3) | 0x04
#define CLR_TIMSK1_OCIE1B TIMSK1 &= 0xF3
#else
#define OCF1A_bm _BV(OCF1A)
#define OCF1B_bm _BV(OCF1B)
#define SET_TIMSK1_OCIE1B TIMSK1 |= _BV(OCIE1B)
#define CLR_TIMSK1_OCIE1B TIMSK1 &=~_BV(OCIE1B)
#endif
//*******************
//*** Pinouts ***
//*******************
// TX
#define SERIAL_TX_pin 1 //PD1
#define SERIAL_TX_port PORTD
#define SERIAL_TX_ddr DDRD
#define SERIAL_TX_output SERIAL_TX_ddr |= _BV(SERIAL_TX_pin)
#define SERIAL_TX_on SERIAL_TX_port |= _BV(SERIAL_TX_pin)
#define SERIAL_TX_off SERIAL_TX_port &= ~_BV(SERIAL_TX_pin)
#ifdef DEBUG_TX
#define DEBUG_TX_on SERIAL_TX_ON
#define DEBUG_TX_off SERIAL_TX_OFF
#define DEBUG_TX_toggle SERIAL_TX_port ^= _BV(SERIAL_TX_pin)
#else
#define DEBUG_TX_on
#define DEBUG_TX_off
#define DEBUG_TX_toggle
#endif
// Dial
#define MODE_DIAL1_pin 2
#define MODE_DIAL1_port PORTB
#define MODE_DIAL1_ipr PINB
#define MODE_DIAL2_pin 3
#define MODE_DIAL2_port PORTB
#define MODE_DIAL2_ipr PINB
#define MODE_DIAL3_pin 4
#define MODE_DIAL3_port PORTB
#define MODE_DIAL3_ipr PINB
#define MODE_DIAL4_pin 0
#define MODE_DIAL4_port PORTC
#define MODE_DIAL4_ipr PINC
// PPM
#define PPM_pin 3 //D3 = PD3
#define PPM_port PORTD
// SDIO
#define SDI_pin 5 //D5 = PD5
#define SDI_port PORTD
#define SDI_ipr PIND
#define SDI_ddr DDRD
#ifdef XMEGA
#define SDI_on SDI_port.OUTSET = _BV(SDI_pin)
#define SDI_off SDI_port.OUTCLR = _BV(SDI_pin)
#else
#define SDI_on SDI_port |= _BV(SDI_pin)
#define SDI_off SDI_port &= ~_BV(SDI_pin)
#define SDI_1 (SDI_ipr & _BV(SDI_pin))
#define SDI_0 (SDI_ipr & _BV(SDI_pin)) == 0x00
#endif
#define SDI_input SDI_ddr &= ~_BV(SDI_pin)
#define SDI_output SDI_ddr |= _BV(SDI_pin)
//SDO
#define SDO_pin 6 //D6 = PD6
#define SDO_port PORTD
#define SDO_ipr PIND
#ifdef XMEGA
#define SDO_1 (SDO_port.IN & _BV(SDO_pin))
#define SDO_0 (SDO_port.IN & _BV(SDO_pin)) == 0x00
#else
#define SDO_1 (SDO_ipr & _BV(SDO_pin))
#define SDO_0 (SDO_ipr & _BV(SDO_pin)) == 0x00
#endif
// SCLK
#define SCLK_port PORTD
#define SCLK_ddr DDRD
#ifdef XMEGA
#define SCLK_pin 7 //PD7
#define SCLK_on SCLK_port.OUTSET = _BV(SCLK_pin)
#define SCLK_off SCLK_port.OUTCLR = _BV(SCLK_pin)
#else
#define SCLK_pin 4 //D4 = PD4
#define SCLK_output SCLK_ddr |= _BV(SCLK_pin)
#define SCLK_on SCLK_port |= _BV(SCLK_pin)
#define SCLK_off SCLK_port &= ~_BV(SCLK_pin)
#endif
// A7105
#define A7105_CSN_pin 2 //D2 = PD2
#define A7105_CSN_port PORTD
#define A7105_CSN_ddr DDRD
#define A7105_CSN_output A7105_CSN_ddr |= _BV(A7105_CSN_pin)
#define A7105_CSN_on A7105_CSN_port |= _BV(A7105_CSN_pin)
#define A7105_CSN_off A7105_CSN_port &= ~_BV(A7105_CSN_pin)
// CC2500
#define CC25_CSN_pin 7 //D7 = PD7
#define CC25_CSN_port PORTD
#define CC25_CSN_ddr DDRD
#define CC25_CSN_output CC25_CSN_ddr |= _BV(CC25_CSN_pin)
#define CC25_CSN_on CC25_CSN_port |= _BV(CC25_CSN_pin)
#define CC25_CSN_off CC25_CSN_port &= ~_BV(CC25_CSN_pin)
// NRF24L01
#define NRF_CSN_pin 0 //D8 = PB0
#define NRF_CSN_port PORTB
#define NRF_CSN_ddr DDRB
#define NRF_CSN_output NRF_CSN_ddr |= _BV(NRF_CSN_pin)
#define NRF_CSN_on NRF_CSN_port |= _BV(NRF_CSN_pin)
#define NRF_CSN_off NRF_CSN_port &= ~_BV(NRF_CSN_pin)
#define NRF_CE_on
#define NRF_CE_off
// CYRF6936
#ifdef XMEGA
#define CYRF_CSN_pin 4 //PD4
#define CYRF_CSN_port PORTD
#define CYRF_CSN_ddr DDRD
#define CYRF_CSN_on CYRF_CSN_port.OUTSET = _BV(CYRF_CSN_pin)
#define CYRF_CSN_off CYRF_CSN_port.OUTCLR = _BV(CYRF_CSN_pin)
#else
#define CYRF_CSN_pin 1 //D9 = PB1
#define CYRF_CSN_port PORTB
#define CYRF_CSN_ddr DDRB
#define CYRF_CSN_output CYRF_CSN_ddr |= _BV(CYRF_CSN_pin)
#define CYRF_CSN_on CYRF_CSN_port |= _BV(CYRF_CSN_pin)
#define CYRF_CSN_off CYRF_CSN_port &= ~_BV(CYRF_CSN_pin)
#define CYRF_RST_pin 5 //A5 = PC5
#define CYRF_RST_port PORTC
#define CYRF_RST_ddr DDRC
#define CYRF_RST_output CYRF_RST_ddr |= _BV(CYRF_RST_pin)
#define CYRF_RST_HI CYRF_RST_port |= _BV(CYRF_RST_pin)
#define CYRF_RST_LO CYRF_RST_port &= ~_BV(CYRF_RST_pin)
#endif
//RF Switch
#ifdef XMEGA
#define PE1_on
#define PE1_off
#define PE2_on
#define PE2_off
#else
#define PE1_pin 1 //A1 = PC1
#define PE1_port PORTC
#define PE1_ddr DDRC
#define PE1_output PE1_ddr |= _BV(PE1_pin)
#define PE1_on PE1_port |= _BV(PE1_pin)
#define PE1_off PE1_port &= ~_BV(PE1_pin)
#define PE2_pin 2 //A2 = PC2
#define PE2_port PORTC
#define PE2_ddr DDRC
#define PE2_output PE2_ddr |= _BV(PE2_pin)
#define PE2_on PE2_port |= _BV(PE2_pin)
#define PE2_off PE2_port &= ~_BV(PE2_pin)
#endif
// LED
#ifdef XMEGA
#define LED_pin 1 //PD1
#define LED_port PORTD
#define LED_ddr DDRD
#define LED_on LED_port.OUTCLR = _BV(LED_pin)
#define LED_off LED_port.OUTSET = _BV(LED_pin)
#define LED_toggle LED_port.OUTTGL = _BV(LED_pin)
#define LED_output LED_port.DIRSET = _BV(LED_pin)
#define IS_LED_on (LED_port.OUT & _BV(LED_pin))
#else
#define LED_pin 5 //D13 = PB5
#define LED_port PORTB
#define LED_ddr DDRB
#define LED_on LED_port |= _BV(LED_pin)
#define LED_off LED_port &= ~_BV(LED_pin)
#define LED_toggle LED_port ^= _BV(LED_pin)
#define LED_output LED_ddr |= _BV(LED_pin)
#define IS_LED_on (LED_port & _BV(LED_pin))
#endif
//BIND
#ifdef XMEGA
#define BIND_pin 2 //PD2
#define BIND_port PORTD
#define IS_BIND_BUTTON_on ( (BIND_port.IN & _BV(BIND_pin)) == 0x00 )
#else
#define BIND_pin 5 //D13 = PB5
#define BIND_port PORTB
#define BIND_ipr PINB
#define BIND_ddr DDRB
#define BIND_SET_INPUT BIND_ddr &= ~_BV(BIND_pin)
#define BIND_SET_OUTPUT BIND_ddr |= _BV(BIND_pin)
#define BIND_SET_PULLUP BIND_port |= _BV(BIND_pin)
#define IS_BIND_BUTTON_on ( (BIND_ipr & _BV(BIND_pin)) == 0x00 )
#endif
// Macros
#define NOP() __asm__ __volatile__("nop")
#define BV(bit) (1 << bit)
//Serial flags definition
#define RX_FLAG_on protocol_flags |= _BV(0)
#define RX_FLAG_off protocol_flags &= ~_BV(0)
#define IS_RX_FLAG_on ( ( protocol_flags & _BV(0) ) !=0 )
//
#define CHANGE_PROTOCOL_FLAG_on protocol_flags |= _BV(1)
#define CHANGE_PROTOCOL_FLAG_off protocol_flags &= ~_BV(1)
#define IS_CHANGE_PROTOCOL_FLAG_on ( ( protocol_flags & _BV(1) ) !=0 )
//
#define POWER_FLAG_on protocol_flags |= _BV(2)
#define POWER_FLAG_off protocol_flags &= ~_BV(2)
#define IS_POWER_FLAG_on ( ( protocol_flags & _BV(2) ) !=0 )
//
#define RANGE_FLAG_on protocol_flags |= _BV(3)
#define RANGE_FLAG_off protocol_flags &= ~_BV(3)
#define IS_RANGE_FLAG_on ( ( protocol_flags & _BV(3) ) !=0 )
//
#define AUTOBIND_FLAG_on protocol_flags |= _BV(4)
#define AUTOBIND_FLAG_off protocol_flags &= ~_BV(4)
#define IS_AUTOBIND_FLAG_on ( ( protocol_flags & _BV(4) ) !=0 )
//
#define BIND_BUTTON_FLAG_on protocol_flags |= _BV(5)
#define BIND_BUTTON_FLAG_off protocol_flags &= ~_BV(5)
#define IS_BIND_BUTTON_FLAG_on ( ( protocol_flags & _BV(5) ) !=0 )
//PPM RX OK
#define PPM_FLAG_off protocol_flags &= ~_BV(6)
#define PPM_FLAG_on protocol_flags |= _BV(6)
#define IS_PPM_FLAG_on ( ( protocol_flags & _BV(6) ) !=0 )
//Bind flag for blinking
#define BIND_IN_PROGRESS protocol_flags &= ~_BV(7)
#define BIND_DONE protocol_flags |= _BV(7)
#define IS_BIND_DONE_on ( ( protocol_flags & _BV(7) ) !=0 )
#define BAD_PROTO_off protocol_flags2 &= ~_BV(0)
#define BAD_PROTO_on protocol_flags2 |= _BV(0)
#define IS_BAD_PROTO_on ( ( protocol_flags2 & _BV(0) ) !=0 )
#define RX_DONOTUPDTAE_off protocol_flags2 &= ~_BV(1)
#define RX_DONOTUPDTAE_on protocol_flags2 |= _BV(1)
#define IS_RX_DONOTUPDTAE_on ( ( protocol_flags2 & _BV(1) ) !=0 )
#define RX_MISSED_BUFF_off protocol_flags2 &= ~_BV(2)
#define RX_MISSED_BUFF_on protocol_flags2 |= _BV(2)
#define IS_RX_MISSED_BUFF_on ( ( protocol_flags2 & _BV(2) ) !=0 )
#define TX_MAIN_PAUSE_off protocol_flags2 &= ~_BV(3)
#define TX_MAIN_PAUSE_on protocol_flags2 |= _BV(3)
#define IS_TX_MAIN_PAUSE_on ( ( protocol_flags2 & _BV(3) ) !=0 )
#define TX_RX_PAUSE_off protocol_flags2 &= ~_BV(4)
#define TX_RX_PAUSE_on protocol_flags2 |= _BV(4)
#define IS_TX_RX_PAUSE_on ( ( protocol_flags2 & _BV(4) ) !=0 )
#define IS_TX_PAUSE_on ( ( protocol_flags2 & (_BV(4)|_BV(3)) ) !=0 )
#define BLINK_BIND_TIME 100
#define BLINK_SERIAL_TIME 500
#define BLINK_BAD_PROTO_TIME_LOW 1000
#define BLINK_BAD_PROTO_TIME_HIGH 50
//AUX flags definition
#define Servo_AUX1 Servo_AUX & _BV(0)
#define Servo_AUX2 Servo_AUX & _BV(1)
#define Servo_AUX3 Servo_AUX & _BV(2)
#define Servo_AUX4 Servo_AUX & _BV(3)
#define Servo_AUX5 Servo_AUX & _BV(4)
#define Servo_AUX6 Servo_AUX & _BV(5)
#define Servo_AUX7 Servo_AUX & _BV(6)
#define Servo_AUX8 Servo_AUX & _BV(7)
#define GET_FLAG(ch, mask) ( ch ? mask : 0)
//************************
//*** Power settings ***
//************************
enum {
TXPOWER_100uW,
TXPOWER_300uW,
TXPOWER_1mW,
TXPOWER_3mW,
TXPOWER_10mW,
TXPOWER_30mW,
TXPOWER_100mW,
TXPOWER_150mW
};
// A7105 power
// Power amp is ~+16dBm so:
enum A7105_POWER
{
A7105_POWER_0 = 0x00<<3 | 0x00, // TXPOWER_100uW = -23dBm == PAC=0 TBG=0
A7105_POWER_1 = 0x00<<3 | 0x01, // TXPOWER_300uW = -20dBm == PAC=0 TBG=1
A7105_POWER_2 = 0x00<<3 | 0x02, // TXPOWER_1mW = -16dBm == PAC=0 TBG=2
A7105_POWER_3 = 0x00<<3 | 0x04, // TXPOWER_3mW = -11dBm == PAC=0 TBG=4
A7105_POWER_4 = 0x01<<3 | 0x05, // TXPOWER_10mW = -6dBm == PAC=1 TBG=5
A7105_POWER_5 = 0x02<<3 | 0x07, // TXPOWER_30mW = 0dBm == PAC=2 TBG=7
A7105_POWER_6 = 0x03<<3 | 0x07, // TXPOWER_100mW = 1dBm == PAC=3 TBG=7
A7105_POWER_7 = 0x03<<3 | 0x07 // TXPOWER_150mW = 1dBm == PAC=3 TBG=7
};
#define A7105_HIGH_POWER A7105_POWER_7
#define A7105_LOW_POWER A7105_POWER_3
#define A7105_RANGE_POWER A7105_POWER_0
#define A7105_BIND_POWER A7105_POWER_0
// NRF Power
// Power setting is 0..3 for nRF24L01
// Claimed power amp for nRF24L01 from eBay is 20dBm.
enum NRF_POWER
{ // Raw w 20dBm PA
NRF_POWER_0 = 0x00, // 0 : -18dBm (16uW) 2dBm (1.6mW)
NRF_POWER_1 = 0x01, // 1 : -12dBm (60uW) 8dBm (6mW)
NRF_POWER_2 = 0x02, // 2 : -6dBm (250uW) 14dBm (25mW)
NRF_POWER_3 = 0x03 // 3 : 0dBm (1mW) 20dBm (100mW)
};
#define NRF_HIGH_POWER NRF_POWER_2
#define NRF_LOW_POWER NRF_POWER_1
#define NRF_RANGE_POWER NRF_POWER_0
#define NRF_BIND_POWER NRF_POWER_0
// CC2500 power output from the chip itself
// The numbers do not take into account any outside amplifier
enum CC2500_POWER
{
CC2500_POWER_0 = 0x00, // –55dbm or less
CC2500_POWER_1 = 0x50, // -30dbm
CC2500_POWER_2 = 0x44, // –28dbm
CC2500_POWER_3 = 0xC0, // –26dbm
CC2500_POWER_4 = 0x84, // –24dbm
CC2500_POWER_5 = 0x81, // –22dbm
CC2500_POWER_6 = 0x46, // –20dbm
CC2500_POWER_7 = 0x93, // –18dbm
CC2500_POWER_8 = 0x55, // –16dbm
CC2500_POWER_9 = 0x8D, // –14dbm
CC2500_POWER_10 = 0xC6, // -12dbm
CC2500_POWER_11 = 0x97, // -10dbm
CC2500_POWER_12 = 0x6E, // -8dbm
CC2500_POWER_13 = 0x7F, // -6dbm
CC2500_POWER_14 = 0xA9, // -4dbm
CC2500_POWER_15 = 0xBB, // -2dbm
CC2500_POWER_16 = 0xFE, // 0dbm
CC2500_POWER_17 = 0xFF // +1dbm
};
#define CC2500_HIGH_POWER CC2500_POWER_16
#define CC2500_LOW_POWER CC2500_POWER_13
#define CC2500_RANGE_POWER CC2500_POWER_1
#define CC2500_BIND_POWER CC2500_POWER_1
// CYRF power
enum CYRF_POWER
{
CYRF_POWER_0 = 0x00, // -35dbm
CYRF_POWER_1 = 0x01, // -30dbm
CYRF_POWER_2 = 0x02, // -24dbm
CYRF_POWER_3 = 0x03, // -18dbm
CYRF_POWER_4 = 0x04, // -13dbm
CYRF_POWER_5 = 0x05, // -5dbm
CYRF_POWER_6 = 0x06, // 0dbm
CYRF_POWER_7 = 0x07 // +4dbm
};
#define CYRF_HIGH_POWER CYRF_POWER_7
#define CYRF_LOW_POWER CYRF_POWER_3
#define CYRF_RANGE_POWER CYRF_POWER_1 // 1/30 of the full power distance
#define CYRF_BIND_POWER CYRF_POWER_0
enum TXRX_State {
TXRX_OFF,
TX_EN,
RX_EN
};
// Packet ack status values
enum {
PKT_PENDING = 0,
PKT_ACKED,
PKT_TIMEOUT
};
// baudrate defines for serial
#define SPEED_100K 0
#define SPEED_9600 1
#define SPEED_57600 2
#define SPEED_125K 3
//****************************************
//*** MULTI protocol serial definition ***
//****************************************
/*
**************************
16 channels serial protocol
**************************
Serial: 100000 Baud 8e2 _ xxxx xxxx p --
Total of 26 bytes
Stream[0] = 0x55 sub_protocol values are 0..31
Stream[0] = 0x54 sub_protocol values are 32..63
header
Stream[1] = sub_protocol|BindBit|RangeCheckBit|AutoBindBit;
sub_protocol is 0..31 (bits 0..4), value should be added with 32 if Stream[0] = 0x54
=> Reserved 0
Flysky 1
Hubsan 2
FrskyD 3
Hisky 4
V2x2 5
DSM 6
Devo 7
YD717 8
KN 9
SymaX 10
SLT 11
CX10 12
CG023 13
Bayang 14
FrskyX 15
ESky 16
MT99XX 17
MJXQ 18
SHENQI 19
FY326 20
SFHSS 21
J6PRO 22
FQ777 23
ASSAN 24
FrskyV 25
HONTAI 26
OpenLRS 27
BindBit=> 0x80 1=Bind/0=No
AutoBindBit=> 0x40 1=Yes /0=No
RangeCheck=> 0x20 1=Yes /0=No
Stream[2] = RxNum | Power | Type;
RxNum value is 0..15 (bits 0..3)
Type is 0..7 <<4 (bit 4..6)
sub_protocol==Flysky
Flysky 0
V9x9 1
V6x6 2
V912 3
sub_protocol==Hisky
Hisky 0
HK310 1
sub_protocol==DSM
DSM2_22 0
DSM2_11 1
DSMX_22 2
DSMX_11 3
sub_protocol==YD717
YD717 0
SKYWLKR 1
SYMAX4 2
XINXUN 3
NIHUI 4
sub_protocol==KN
WLTOYS 0
FEILUN 1
sub_protocol==SYMAX
SYMAX 0
SYMAX5C 1
sub_protocol==CX10
CX10_GREEN 0
CX10_BLUE 1 // also compatible with CX10-A, CX12
DM007 2
Q282 3
JC3015_1 4
JC3015_2 5
MK33041 6
Q242 7
sub_protocol==CG023
CG023 0
YD829 1
H8_3D 2
sub_protocol==MT99XX
MT99 0
H7 1
YZ 2
LS 3
sub_protocol==MJXQ
WLH08 0
X600 1
X800 2
H26D 3
E010 4
sub_protocol==FRSKYX
CH_16 0
CH_8 1
sub_protocol==HONTAI
FORMAT_HONTAI 0
FORMAT_JJRCX1 1
FORMAT_X5C1 2
Power value => 0x80 0=High/1=Low
Stream[3] = option_protocol;
option_protocol value is -127..127
Stream[4] to [25] = Channels
16 Channels on 11 bits (0..2047)
0 -125%
204 -100%
1024 0%
1843 +100%
2047 +125%
Channels bits are concatenated to fit in 22 bytes like in SBUS protocol
*/
Reference in New Issue View Git Blame Copy Permalink