mirror of
https://github.com/pascallanger/DIY-Multiprotocol-TX-Module.git
synced 2025-02-10 00:08:13 +00:00
32 lines
1.6 KiB
Markdown
32 lines
1.6 KiB
Markdown
#Model Setup
|
|
This is the page to document model or receiver specific setup instructions.
|
|
|
|
The Deviation project (on which this project was based) have a useful list of models [here](http://www.deviationtx.com/wiki/supported_models).
|
|
|
|
#Syma X5C
|
|
<img src="http://img2.cheapdrone.co.uk/images/upload/2014/12/X5C%203/SKU115108-7.jpg" Width="200" Height="200" />
|
|
##Binding
|
|
There are no special binding instructions. The model powers up in Autobind mode and expects the bind sequence from the transmitter within the first 4-5 seconds.
|
|
##Tx Setup
|
|
A basic 4-channel setup works perfectly, but some improvements are possible:
|
|
###Setting up a switch to Flip
|
|
|
|
###Setting up a swich for high rates
|
|
|
|
###Setting up Idle-up
|
|
One of the most annoying functions on the Syma X5C is that the motors stop when the throttle is pulled back. This can be fixed by implmenting Idle-up on the transmitter (think of this as a very simple version of the Betaflight "Air Mode"). Idle up will ensure that even when the throttle is all the way down, a minimum command is passed to the motor to keep them spinning and to activate the stabilization.
|
|
|
|
To do this:
|
|
1. Decide on a switch you will use to activate Idle up
|
|
1. In the mixer menu add a line under Throttle and mix in a value of between 4 and 6 to be added to the throttle value if the switch is activated. What this does is effectively prevents the throttle from
|
|
|
|
#Inductrix (Horizon Hobby)
|
|
|
|
<img src="https://s7d5.scene7.com/is/image/horizonhobby/BLH8700_a0" Width="200" Height="200" />
|
|
|
|
##Binding
|
|
{Enter bind instructions here - Which DSM mode works best?}
|
|
|
|
##Tx Setup
|
|
{How to setup the transmitter optimally for leveling and acro mode}
|