1.6 KiB
#Model Setup This is the page to document model or receiver specific setup instructions.
The Deviation project (on which this project was based) have a useful list of models here.
#Syma X5C
##Binding
There are no special binding instructions. The model powers up in Autobind mode and expects the bind sequence from the transmitter within the first 4-5 seconds.
##Tx Setup
A basic 4-channel setup works perfectly, but some improvements are possible:
###Setting up a switch to Flip
###Setting up a swich for high rates
###Setting up Idle-up One of the most annoying functions on the Syma X5C is that the motors stop when the throttle is pulled back. This can be fixed by implmenting Idle-up on the transmitter (think of this as a very simple version of the Betaflight "Air Mode"). Idle up will ensure that even when the throttle is all the way down, a minimum command is passed to the motor to keep them spinning and to activate the stabilization.
To do this:
- Decide on a switch you will use to activate Idle up
- In the mixer menu add a line under Throttle and mix in a value of between 4 and 6 to be added to the throttle value if the switch is activated. What this does is effectively prevents the throttle from
#Inductrix (Horizon Hobby)
##Binding {Enter bind instructions here - Which DSM mode works best?}
##Tx Setup {How to setup the transmitter optimally for leveling and acro mode}