mirror of
https://github.com/pascallanger/DIY-Multiprotocol-TX-Module.git
synced 2025-02-04 22:48:12 +00:00
32 lines
1.3 KiB
Markdown
32 lines
1.3 KiB
Markdown
# Bluetooth Telemetry in PPM Mode
|
|
|
|
## Telemetry
|
|
|
|
There are 4 protocols supporting telemetry: Hubsan, DSM, FrSkyD and FrSkyX.
|
|
|
|
Hubsan displays the battery voltage and TX RSSI.
|
|
|
|
DSM displays TX RSSI and full telemetry.
|
|
|
|
FrSkyD displays full telemetry (A0, A1, RX RSSI, TX RSSI and Hub).
|
|
|
|
FrSkyX displays full telemetry (A1, A2, RX RSSI, TX RSSI and Hub).
|
|
|
|
## If used in PPM mode
|
|
|
|
Telemetry is available as a serial output on the TX pin of the Atmega328p using the FrSky hub format for Hubsan, FrSkyD, FrSkyX and DSM format for DSM2/X. The serial paramets depends on the protocol:
|
|
|
|
Protocol|Serial Parameters
|
|
--------|-----------------
|
|
Hubsan|9600bps 8n1
|
|
FrSkyD|9600bps 8n1
|
|
FrSkyX|57,600bps 8n1
|
|
DSM2/X|125,000bps 8n1
|
|
|
|
The serial stream is also available on pin 5 of the Module connector (pins numbered from top to bottom) on the [4-in-1 module](Module_BG_4-in-1.md) and the [V2.3d modules](Module_Build_yourself_PCB.md) provided the Tx jumper has been soldered. See the linked module documentation for what this means.
|
|
|
|
|
|
You can connect it to your TX if it is telemetry enabled or use a bluetooth adapter (HC05/HC06) along with an app on your phone/tablet ([app example](https://play.google.com/store/apps/details?id=biz.onomato.frskydash&hl=fr)) to display telemetry information and setup alerts.
|
|
|
|
|