mirror of
https://github.com/pascallanger/DIY-Multiprotocol-TX-Module.git
synced 2025-02-04 20:58:10 +00:00
309 lines
8.7 KiB
C++
309 lines
8.7 KiB
C++
/*
|
|
This project is free software: you can redistribute it and/or modify
|
|
it under the terms of the GNU General Public License as published by
|
|
the Free Software Foundation, either version 3 of the License, or
|
|
(at your option) any later version.
|
|
|
|
Multiprotocol is distributed in the hope that it will be useful,
|
|
but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
GNU General Public License for more details.
|
|
|
|
You should have received a copy of the GNU General Public License
|
|
along with Multiprotocol. If not, see <http://www.gnu.org/licenses/>.
|
|
*/
|
|
// compatible with MT99xx, Eachine H7, Yi Zhan i6S and LS114/124
|
|
// Last sync with Goebish mt99xx_nrf24l01.c dated 2016-01-29
|
|
|
|
#if defined(MT99XX_NRF24L01_INO)
|
|
|
|
#include "iface_nrf24l01.h"
|
|
|
|
#define MT99XX_BIND_COUNT 928
|
|
#define MT99XX_PACKET_PERIOD_FY805 2460
|
|
#define MT99XX_PACKET_PERIOD_MT 2625
|
|
#define MT99XX_PACKET_PERIOD_YZ 3125
|
|
#define MT99XX_INITIAL_WAIT 500
|
|
#define MT99XX_PACKET_SIZE 9
|
|
|
|
#define checksum_offset rf_ch_num
|
|
#define channel_offset phase
|
|
|
|
enum{
|
|
// flags going to packet[6] (MT99xx, H7)
|
|
FLAG_MT_RATE1 = 0x01, // (H7 high rate)
|
|
FLAG_MT_RATE2 = 0x02, // (MT9916 only)
|
|
FLAG_MT_VIDEO = 0x10,
|
|
FLAG_MT_SNAPSHOT= 0x20,
|
|
FLAG_MT_FLIP = 0x80,
|
|
};
|
|
|
|
enum{
|
|
// flags going to packet[6] (LS)
|
|
FLAG_LS_INVERT = 0x01,
|
|
FLAG_LS_RATE = 0x02,
|
|
FLAG_LS_HEADLESS= 0x10,
|
|
FLAG_LS_SNAPSHOT= 0x20,
|
|
FLAG_LS_VIDEO = 0x40,
|
|
FLAG_LS_FLIP = 0x80,
|
|
};
|
|
|
|
enum{
|
|
// flags going to packet[7] (FY805)
|
|
FLAG_FY805_HEADLESS= 0x10,
|
|
};
|
|
|
|
enum {
|
|
MT99XX_INIT = 0,
|
|
MT99XX_BIND,
|
|
MT99XX_DATA
|
|
};
|
|
|
|
const uint8_t h7_mys_byte[] = {
|
|
0x01, 0x11, 0x02, 0x12, 0x03, 0x13, 0x04, 0x14,
|
|
0x05, 0x15, 0x06, 0x16, 0x07, 0x17, 0x00, 0x10
|
|
};
|
|
|
|
static const uint8_t ls_mys_byte[] = {
|
|
0x05, 0x15, 0x25, 0x06, 0x16, 0x26,
|
|
0x07, 0x17, 0x27, 0x00, 0x10, 0x20,
|
|
0x01, 0x11, 0x21, 0x02, 0x12, 0x22,
|
|
0x03, 0x13, 0x23, 0x04, 0x14, 0x24
|
|
};
|
|
|
|
static void __attribute__((unused)) MT99XX_send_packet()
|
|
{
|
|
const uint8_t yz_p4_seq[] = {0xa0, 0x20, 0x60};
|
|
static uint8_t yz_seq_num=0;
|
|
static uint8_t ls_counter=0;
|
|
|
|
if(sub_protocol != YZ)
|
|
{ // MT99XX & H7 & LS
|
|
packet[0] = convert_channel_16b_limit(THROTTLE,0xE1,0x00); // throttle
|
|
packet[1] = convert_channel_16b_limit(RUDDER ,0x00,0xE1); // rudder
|
|
packet[2] = convert_channel_16b_limit(AILERON ,0xE1,0x00); // aileron
|
|
packet[3] = convert_channel_16b_limit(ELEVATOR,0x00,0xE1); // elevator
|
|
packet[4] = 0x20; // pitch trim (0x3f-0x20-0x00)
|
|
packet[5] = 0x20; // roll trim (0x00-0x20-0x3f)
|
|
packet[6] = GET_FLAG( CH5_SW, FLAG_MT_FLIP );
|
|
packet[7] = h7_mys_byte[hopping_frequency_no]; // next rf channel index ?
|
|
|
|
if(sub_protocol==H7)
|
|
packet[6]|=FLAG_MT_RATE1; // max rate on H7
|
|
else
|
|
if(sub_protocol==MT99)
|
|
packet[6] |= 0x40 | FLAG_MT_RATE2
|
|
| GET_FLAG( CH7_SW, FLAG_MT_SNAPSHOT )
|
|
| GET_FLAG( CH8_SW, FLAG_MT_VIDEO ); // max rate on MT99xx
|
|
else
|
|
if(sub_protocol==FY805)
|
|
{
|
|
packet[6]=0x20;
|
|
//Rate 0x01?
|
|
//Flip ?
|
|
packet[7]=0x01
|
|
|GET_FLAG( CH5_SW, FLAG_MT_FLIP )
|
|
|GET_FLAG( CH9_SW, FLAG_FY805_HEADLESS ); //HEADLESS
|
|
checksum_offset=0;
|
|
}
|
|
else //LS
|
|
{
|
|
packet[6] |= FLAG_LS_RATE // max rate
|
|
| GET_FLAG( CH6_SW, FLAG_LS_INVERT ) //INVERT
|
|
| GET_FLAG( CH7_SW, FLAG_LS_SNAPSHOT ) //SNAPSHOT
|
|
| GET_FLAG( CH8_SW, FLAG_LS_VIDEO ) //VIDEO
|
|
| GET_FLAG( CH9_SW, FLAG_LS_HEADLESS ); //HEADLESS
|
|
packet[7] = ls_mys_byte[ls_counter++];
|
|
if(ls_counter >= sizeof(ls_mys_byte))
|
|
ls_counter=0;
|
|
}
|
|
|
|
uint8_t result=checksum_offset;
|
|
for(uint8_t i=0; i<8; i++)
|
|
result += packet[i];
|
|
packet[8] = result;
|
|
}
|
|
else
|
|
{ // YZ
|
|
packet[0] = convert_channel_16b_limit(THROTTLE,0x00,0x64); // throttle
|
|
packet[1] = convert_channel_16b_limit(RUDDER ,0x64,0x00); // rudder
|
|
packet[2] = convert_channel_16b_limit(ELEVATOR,0x00,0x64); // elevator
|
|
packet[3] = convert_channel_16b_limit(AILERON ,0x64,0x00); // aileron
|
|
if(packet_count++ >= 23)
|
|
{
|
|
yz_seq_num ++;
|
|
if(yz_seq_num > 2)
|
|
yz_seq_num = 0;
|
|
packet_count=0;
|
|
}
|
|
packet[4] = yz_p4_seq[yz_seq_num];
|
|
packet[5] = 0x02 // expert ? (0=unarmed, 1=normal)
|
|
| GET_FLAG(CH8_SW, 0x10) //VIDEO
|
|
| GET_FLAG(CH5_SW, 0x80) //FLIP
|
|
| GET_FLAG(CH9_SW, 0x04) //HEADLESS
|
|
| GET_FLAG(CH7_SW, 0x20); //SNAPSHOT
|
|
packet[6] = GET_FLAG(CH6_SW, 0x80); //LED
|
|
packet[7] = packet[0];
|
|
for(uint8_t idx = 1; idx < MT99XX_PACKET_SIZE-2; idx++)
|
|
packet[7] += packet[idx];
|
|
packet[8] = 0xff;
|
|
}
|
|
|
|
if(sub_protocol == LS)
|
|
NRF24L01_WriteReg(NRF24L01_05_RF_CH, 0x2D); // LS always transmits on the same channel
|
|
else
|
|
if(sub_protocol==FY805)
|
|
NRF24L01_WriteReg(NRF24L01_05_RF_CH, 0x4B); // FY805 always transmits on the same channel
|
|
else
|
|
NRF24L01_WriteReg(NRF24L01_05_RF_CH, hopping_frequency[hopping_frequency_no] + channel_offset);
|
|
NRF24L01_WriteReg(NRF24L01_07_STATUS, 0x70);
|
|
NRF24L01_FlushTx();
|
|
XN297_WritePayload(packet, MT99XX_PACKET_SIZE);
|
|
|
|
hopping_frequency_no++;
|
|
if(sub_protocol == YZ)
|
|
hopping_frequency_no++; // skip every other channel
|
|
|
|
if(hopping_frequency_no > 15)
|
|
hopping_frequency_no = 0;
|
|
|
|
NRF24L01_SetPower();
|
|
}
|
|
|
|
static void __attribute__((unused)) MT99XX_init()
|
|
{
|
|
NRF24L01_Initialize();
|
|
if(sub_protocol == YZ)
|
|
XN297_SetScrambledMode(XN297_UNSCRAMBLED);
|
|
NRF24L01_SetTxRxMode(TX_EN);
|
|
NRF24L01_FlushTx();
|
|
XN297_SetTXAddr((uint8_t *)"\xCC\xCC\xCC\xCC\xCC", 5);
|
|
NRF24L01_WriteReg(NRF24L01_07_STATUS, 0x70); // Clear data ready, data sent, and retransmit
|
|
NRF24L01_WriteReg(NRF24L01_01_EN_AA, 0x00); // No Auto Acknowldgement on all data pipes
|
|
NRF24L01_WriteReg(NRF24L01_02_EN_RXADDR, 0x01); // Enable data pipe 0 only
|
|
NRF24L01_WriteReg(NRF24L01_03_SETUP_AW, 0x03); // 5 bytes address
|
|
NRF24L01_WriteReg(NRF24L01_04_SETUP_RETR, 0x00); // no auto retransmit
|
|
if(sub_protocol == YZ)
|
|
NRF24L01_SetBitrate(NRF24L01_BR_250K); // 250Kbps (nRF24L01+ only)
|
|
else
|
|
NRF24L01_SetBitrate(NRF24L01_BR_1M); // 1Mbps
|
|
NRF24L01_SetPower();
|
|
|
|
XN297_Configure(_BV(NRF24L01_00_EN_CRC) | _BV(NRF24L01_00_CRCO) | _BV(NRF24L01_00_PWR_UP) );
|
|
|
|
}
|
|
|
|
static void __attribute__((unused)) MT99XX_initialize_txid()
|
|
{
|
|
rx_tx_addr[3] = 0xCC;
|
|
rx_tx_addr[4] = 0xCC;
|
|
if(sub_protocol == YZ)
|
|
{
|
|
rx_tx_addr[0] = 0x53; // test (SB id)
|
|
rx_tx_addr[1] = 0x00;
|
|
rx_tx_addr[2] = 0x00;
|
|
}
|
|
else
|
|
if(sub_protocol == FY805)
|
|
{
|
|
rx_tx_addr[0] = 0x81; // test (SB id)
|
|
rx_tx_addr[1] = 0x0F;
|
|
rx_tx_addr[2] = 0x00;
|
|
}
|
|
else
|
|
if(sub_protocol == LS)
|
|
rx_tx_addr[0] = 0xCC;
|
|
else //MT99 & H7
|
|
rx_tx_addr[2] = 0x00;
|
|
checksum_offset = rx_tx_addr[0] + rx_tx_addr[1] + rx_tx_addr[2];
|
|
channel_offset = (((checksum_offset & 0xf0)>>4) + (checksum_offset & 0x0f)) % 8;
|
|
}
|
|
|
|
uint16_t MT99XX_callback()
|
|
{
|
|
if(IS_BIND_DONE)
|
|
{
|
|
telemetry_set_input_sync(packet_period);
|
|
MT99XX_send_packet();
|
|
}
|
|
else
|
|
{
|
|
if (bind_counter == 0)
|
|
{
|
|
// set tx address for data packets
|
|
XN297_SetTXAddr(rx_tx_addr, 5);
|
|
BIND_DONE;
|
|
}
|
|
else
|
|
{
|
|
if(sub_protocol == LS)
|
|
NRF24L01_WriteReg(NRF24L01_05_RF_CH, 0x2D); // LS always transmits on the same channel
|
|
else
|
|
if(sub_protocol==FY805)
|
|
NRF24L01_WriteReg(NRF24L01_05_RF_CH, 0x4B); // FY805 always transmits on the same channel
|
|
else
|
|
NRF24L01_WriteReg(NRF24L01_05_RF_CH, hopping_frequency[hopping_frequency_no]);
|
|
NRF24L01_WriteReg(NRF24L01_07_STATUS, 0x70);
|
|
NRF24L01_FlushTx();
|
|
XN297_WritePayload(packet, MT99XX_PACKET_SIZE); // bind packet
|
|
hopping_frequency_no++;
|
|
if(sub_protocol == YZ)
|
|
hopping_frequency_no++; // skip every other channel
|
|
if(hopping_frequency_no > 15)
|
|
hopping_frequency_no = 0;
|
|
bind_counter--;
|
|
}
|
|
}
|
|
|
|
return packet_period;
|
|
}
|
|
|
|
uint16_t initMT99XX(void)
|
|
{
|
|
BIND_IN_PROGRESS; // autobind protocol
|
|
bind_counter = MT99XX_BIND_COUNT;
|
|
|
|
memcpy(hopping_frequency,"\x02\x48\x0C\x3e\x16\x34\x20\x2A\x2A\x20\x34\x16\x3e\x0c\x48\x02",16);
|
|
hopping_frequency_no=0;
|
|
|
|
MT99XX_initialize_txid();
|
|
MT99XX_init();
|
|
|
|
packet[0] = 0x20;
|
|
packet_period = MT99XX_PACKET_PERIOD_MT;
|
|
switch(sub_protocol)
|
|
{ // MT99 & H7
|
|
case MT99:
|
|
case H7:
|
|
packet[1] = 0x14;
|
|
packet[2] = 0x03;
|
|
packet[3] = 0x25;
|
|
break;
|
|
case YZ:
|
|
packet_period = MT99XX_PACKET_PERIOD_YZ;
|
|
packet[1] = 0x15;
|
|
packet[2] = 0x05;
|
|
packet[3] = 0x06;
|
|
break;
|
|
case LS:
|
|
packet[1] = 0x14;
|
|
packet[2] = 0x05;
|
|
packet[3] = 0x11;
|
|
break;
|
|
case FY805:
|
|
packet_period = MT99XX_PACKET_PERIOD_FY805;
|
|
packet[1] = 0x15;
|
|
packet[2] = 0x12;
|
|
packet[3] = 0x17;
|
|
break;
|
|
}
|
|
packet[4] = rx_tx_addr[0];
|
|
packet[5] = rx_tx_addr[1];
|
|
packet[6] = rx_tx_addr[2];
|
|
packet[7] = checksum_offset; // checksum offset
|
|
packet[8] = 0xAA; // fixed
|
|
packet_count=0;
|
|
return MT99XX_INITIAL_WAIT+MT99XX_PACKET_PERIOD_MT;
|
|
}
|
|
#endif
|