gomaomao/DIY-Multiprotocol-TX-Module
1
0
Fork 0
mirror of https://github.com/pascallanger/DIY-Multiprotocol-TX-Module.git synced 2025-02-04 17:58:13 +00:00
Code Issues Projects Releases Wiki Activity
DIY-Multiprotocol-TX-Module/Multiprotocol/Validate.h
pascallanger 3d5e43da3b Update Validate.h
2024-07-12 16:03:30 +02:00

671 lines
22 KiB
C
Raw Blame History

// Check selected board type
#if defined (STM32_BOARD) && defined (ORANGE_TX)
#error You must comment the board type STM32_BOARD in _Config.h to compile ORANGE_TX
#endif
#if not defined (ORANGE_TX) && not defined (STM32_BOARD)
//Atmega328p
#if not defined(ARDUINO_AVR_PRO) && not defined(ARDUINO_MULTI_NO_BOOT) && not defined(ARDUINO_MULTI_FLASH_FROM_TX) && not defined(ARDUINO_AVR_MINI) && not defined(ARDUINO_AVR_NANO) && not defined(ARDUINO_AVR_DUEMILANOVE)
#error You must select one of these boards: "Multi 4-in-1", "Arduino Pro or Pro Mini" or "Arduino Mini"
#endif
#if F_CPU != 16000000L || not (defined(__AVR_ATmega328P__) || defined(__AVR_ATmega168__))
#error You must select the processor type "ATmega328(5V, 16MHz)"
#endif
#endif
#if defined (STM32_BOARD) && not defined (ORANGE_TX)
//STM32
#if not defined(ARDUINO_GENERIC_STM32F103C) && not defined(ARDUINO_MULTI_STM32_FLASH_FROM_TX) && not defined(ARDUINO_MULTI_STM32_NO_BOOT) && not defined(ARDUINO_MULTI_STM32_WITH_BOOT)
#error You must select one of these boards: "Multi 4-in-1 (STM32F103CB)" or "Generic STM32F103C series"
#endif
#endif
// Check for minimum board file definition version for DIY multi-module boards
#define MIN_AVR_BOARD 110
#define MIN_ORX_BOARD 110
#define MIN_STM32_BOARD 117
//AVR
#if (defined(ARDUINO_MULTI_NO_BOOT) && ARDUINO_MULTI_NO_BOOT < MIN_AVR_BOARD) || (defined(ARDUINO_MULTI_FLASH_FROM_TX) && ARDUINO_MULTI_FLASH_FROM_TX < MIN_AVR_BOARD)
#error You need to update your Multi 4-in-1 board definition. Open Boards Manager and update to the latest version of the Multi 4-in-1 AVR Boards.
#endif
//OrangeRX
#if (defined(ARDUINO_MULTI_ORANGERX) && ARDUINO_MULTI_ORANGERX < MIN_ORX_BOARD)
#error You need to update your Multi 4-in-1 board definition. Open Boards Manager and update to the latest version of the Multi 4-in-1 AVR Boards.
#endif
//STM32
#if (defined(ARDUINO_MULTI_STM32_NO_BOOT) && ARDUINO_MULTI_STM32_NO_BOOT < MIN_STM32_BOARD) || (defined(ARDUINO_MULTI_STM32_FLASH_FROM_TX) && ARDUINO_MULTI_STM32_FLASH_FROM_TX < MIN_STM32_BOARD) || (defined(ARDUINO_MULTI_STM32_WITH_BOOT) && ARDUINO_MULTI_STM32_WITH_BOOT < MIN_STM32_BOARD)
#error You need to update your Multi 4-in-1 board definition. Open Boards Manager and update to the latest version of the Multi 4-in-1 STM32 Board.
#endif
// Enable serial debugging if a debugging option was chosen in the IDE
#ifdef ARDUINO_MULTI_DEBUG
#define DEBUG_SERIAL
#endif
// Error if CHECK_FOR_BOOTLOADER is not enabled but a FLASH_FROM_TX board is selected
#if (defined(ARDUINO_MULTI_FLASH_FROM_TX) || defined(ARDUINO_MULTI_STM32_FLASH_FROM_TX)) &! defined(CHECK_FOR_BOOTLOADER)
#if defined(STM32_BOARD)
#error "You have selected the 'Flash from TX' upload method but not enabled CHECK_FOR_BOOTLOADER."
#else
#error "You have selected the 'Flash from TX' bootloader but not enabled CHECK_FOR_BOOTLOADER."
#endif
#endif
// Warning if CHECK_FOR_BOOTLOADER is enabled but no bootloader
#if defined(ARDUINO_MULTI_NO_BOOT) && defined(CHECK_FOR_BOOTLOADER)
#undef CHECK_FOR_BOOTLOADER
#warning "Disabling CHECK_FOR_BOOTLOADER since no bootloader is selected."
#endif
//Check number of banks
#if NBR_BANKS < 1 || NBR_BANKS > 5
#error "You need to select a number of banks between 1 and 5."
#endif
//Check failsafe throttle value
#ifdef FAILSAFE_ENABLE
#if ( FAILSAFE_THROTTLE_LOW < -125 ) || ( FAILSAFE_THROTTLE_LOW > 125 )
#error "The failsafe value for throttle is outside of the range -125..125."
#endif
#endif
// Check forced tuning values are valid
//CC2500
#ifdef FORCE_CORONA_TUNING
#if ( FORCE_CORONA_TUNING < -127 ) || ( FORCE_CORONA_TUNING > 127 )
#error "The CORONA forced frequency tuning value is outside of the range -127..127."
#endif
#endif
#ifdef FORCE_FRSKYD_TUNING
#if ( FORCE_FRSKYD_TUNING < -127 ) || ( FORCE_FRSKYD_TUNING > 127 )
#error "The FrSkyD forced frequency tuning value is outside of the range -127..127."
#endif
#endif
#ifdef FORCE_FRSKYL_TUNING
#if ( FORCE_FRSKYL_TUNING < -127 ) || ( FORCE_FRSKYL_TUNING > 127 )
#error "The FrSkyL forced frequency tuning value is outside of the range -127..127."
#endif
#endif
#ifdef FORCE_FRSKYV_TUNING
#if ( FORCE_FRSKYV_TUNING < -127 ) || ( FORCE_FRSKYV_TUNING > 127 )
#error "The FrSkyV forced frequency tuning value is outside of the range -127..127."
#endif
#endif
#ifdef FORCE_FRSKYX_TUNING
#if ( FORCE_FRSKYX_TUNING < -127 ) || ( FORCE_FRSKYX_TUNING > 127 )
#error "The FrSkyX forced frequency tuning value is outside of the range -127..127."
#endif
#endif
#ifdef FORCE_HITEC_TUNING
#if ( FORCE_HITEC_TUNING < -127 ) || ( FORCE_HITEC_TUNING > 127 )
#error "The HITEC forced frequency tuning value is outside of the range -127..127."
#endif
#endif
#ifdef FORCE_HOTT_TUNING
#if ( FORCE_HOTT_TUNING < -127 ) || ( FORCE_HOTT_TUNING > 127 )
#error "The HOTT forced frequency tuning value is outside of the range -127..127."
#endif
#endif
#ifdef FORCE_REDPINE_TUNING
#if ( FORCE_REDPINE_TUNING < -127 ) || ( FORCE_REDPINE_TUNING > 127 )
#error "The REDPINE forced frequency tuning value is outside of the range -127..127."
#endif
#endif
#ifdef FORCE_RADIOLINK_TUNING
#if ( FORCE_RADIOLINK_TUNING < -127 ) || ( FORCE_RADIOLINK_TUNING > 127 )
#error "The RADIOLINK forced frequency tuning value is outside of the range -127..127."
#endif
#endif
#ifdef FORCE_FUTABA_TUNING
#if ( FORCE_FUTABA_TUNING < -127 ) || ( FORCE_FUTABA_TUNING > 127 )
#error "The Futaba forced frequency tuning value is outside of the range -127..127."
#endif
#endif
#ifdef FORCE_SKYARTEC_TUNING
#if ( FORCE_SKYARTEC_TUNING < -127 ) || ( FORCE_SKYARTEC_TUNING > 127 )
#error "The SKYARTEC forced frequency tuning value is outside of the range -127..127."
#endif
#endif
//A7105
#ifdef FORCE_AFHDS2A_TUNING
#if ( FORCE_AFHDS2A_TUNING < -300 ) || ( FORCE_AFHDS2A_TUNING > 300 )
#error "The AFHDS2A forced frequency tuning value is outside of the range -300..300."
#endif
#endif
#ifdef FORCE_BUGS_TUNING
#if ( FORCE_BUGS_TUNING < -300 ) || ( FORCE_BUGS_TUNING > 300 )
#error "The BUGS forced frequency tuning value is outside of the range -300..300."
#endif
#endif
#ifdef FORCE_FLYSKY_TUNING
#if ( FORCE_FLYSKY_TUNING < -300 ) || ( FORCE_FLYSKY_TUNING > 300 )
#error "The Flysky forced frequency tuning value is outside of the range -300..300."
#endif
#endif
#ifdef FORCE_HEIGHT_TUNING
#if ( FORCE_HEIGHT_TUNING < -300 ) || ( FORCE_HEIGHT_TUNING > 300 )
#error "The Height forced frequency tuning value is outside of the range -300..300."
#endif
#endif
#ifdef FORCE_PELIKAN_TUNING
#if ( FORCE_PELIKAN_TUNING < -300 ) || ( FORCE_PELIKAN_TUNING > 300 )
#error "The Pelikan forced frequency tuning value is outside of the range -300..300."
#endif
#endif
#ifdef FORCE_HUBSAN_TUNING
#if ( FORCE_HUBSAN_TUNING < -300 ) || ( FORCE_HUBSAN_TUNING > 300 )
#error "The Hubsan forced frequency tuning value is outside of the range -300..300."
#endif
#endif
#ifdef FORCE_JOYSWAY_TUNING
#if ( FORCE_JOYSWAY_TUNING < -300 ) || ( FORCE_JOYSWAY_TUNING > 300 )
#error "The JOYSWAY forced frequency tuning value is outside of the range -300..300."
#endif
#endif
#ifdef FORCE_KYOSHO_TUNING
#if ( FORCE_KYOSHO_TUNING < -300 ) || ( FORCE_KYOSHO_TUNING > 300 )
#error "The Kyosho forced frequency tuning value is outside of the range -300..300."
#endif
#endif
#ifdef FORCE_WFLY2_TUNING
#if ( FORCE_WFLY2_TUNING < -300 ) || ( FORCE_WFLY2_TUNING > 300 )
#error "The WFLY2 forced frequency tuning value is outside of the range -300..300."
#endif
#endif
#ifndef USE_A7105_CH15_TUNING
#ifndef FORCE_BUGS_TUNING
#define FORCE_BUGS_TUNING 0
#endif
#ifndef FORCE_FLYSKY_TUNING
#define FORCE_FLYSKY_TUNING 0
#endif
#ifndef FORCE_HEIGHT_TUNING
#define FORCE_HEIGHT_TUNING 0
#endif
#ifndef FORCE_PELIKAN_TUNING
#define FORCE_PELIKAN_TUNING 0
#endif
#ifndef FORCE_JOYSWAY_TUNING
#define FORCE_JOYSWAY_TUNING 0
#endif
#ifndef FORCE_KYOSHO_TUNING
#define FORCE_KYOSHO_TUNING 0
#endif
#ifndef FORCE_WFLY2_TUNING
#define FORCE_WFLY2_TUNING 0
#endif
#ifndef FORCE_HUBSAN_TUNING
#define FORCE_HUBSAN_TUNING 0
#endif
#ifndef FORCE_AFHDS2A_TUNING
#define FORCE_AFHDS2A_TUNING 0
#endif
#endif
#if defined (USE_CYRF6936_CH15_TUNING) && (DSM_THROTTLE_KILL_CH == 15)
#error "Error Channel 15 conflict between the CYRF6936 freq tuning and the DSM throttle kill feature."
#endif
//Change/Force configuration if OrangeTX
#ifdef ORANGE_TX
#undef ENABLE_PPM // Disable PPM for OrangeTX module
#undef A7105_INSTALLED // Disable A7105 for OrangeTX module
#undef A7105_CSN_pin
#undef CC2500_INSTALLED // Disable CC2500 for OrangeTX module
#undef CC25_CSN_pin
#undef NRF24L01_INSTALLED // Disable NRF for OrangeTX module
#undef NRF_CSN_pin
#undef SX1276_INSTALLED // Disable SX1276 for OrangeTX module
#define TELEMETRY // Enable telemetry
#define INVERT_TELEMETRY // Enable invert telemetry
#define DSM_TELEMETRY // Enable DSM telemetry
#endif
//Change/Force RF chip configuration if MULTI_5IN1_INTERNAL
#ifdef MULTI_5IN1_INTERNAL
#if not defined(STM32_BOARD)
#error "Error MULTI_5IN1_INTERNAL is only for STM32 boards."
#endif
#if ! (MULTI_5IN1_INTERNAL + 0)
#define MULTI_5IN1_INTERNAL JP_T18 // make JP_T18 default if it has not been explicitly declared
#endif
#if MULTI_5IN1_INTERNAL > JP_TLite
#error "Invalid value for MULTI_5IN1_INTERNAL."
#endif
#define A7105_INSTALLED
#define CYRF6936_INSTALLED
#define CC2500_INSTALLED
#define NRF24L01_INSTALLED
#define SX1276_INSTALLED
#undef ENABLE_PPM
#undef SEND_CPPM
#endif
//Make sure protocols are selected correctly
#if not defined(A7105_INSTALLED) || defined MULTI_EU
#undef AFHDS2A_A7105_INO
#if not defined(A7105_INSTALLED)
#undef AFHDS2A_RX_A7105_INO
#endif
#undef BUGS_A7105_INO
#undef FLYSKY_A7105_INO
#undef HEIGHT_A7105_INO
#undef HUBSAN_A7105_INO
#undef JOYSWAY_A7105_INO
#undef KYOSHO_A7105_INO
#undef PELIKAN_A7105_INO
#undef WFLY2_A7105_INO
#endif
#if not defined(CYRF6936_INSTALLED) || defined MULTI_EU
#undef DEVO_CYRF6936_INO
#if not defined(CYRF6936_INSTALLED)
#undef DSM_CYRF6936_INO
#undef DSM_RX_CYRF6936_INO
#endif
#undef E010R5_CYRF6936_INO
#undef E01X_CYRF6936_INO
#undef E129_CYRF6936_INO
#undef J6PRO_CYRF6936_INO
#undef KYOSHO3_CYRF6936_INO
#undef LOSI_CYRF6936_INO
#undef MLINK_CYRF6936_INO
#undef TRAXXAS_CYRF6936_INO
#undef SCORPIO_CYRF6936_INO
#undef WFLY_CYRF6936_INO
#undef WK2x01_CYRF6936_INO
#endif
#if not defined(CC2500_INSTALLED) || defined MULTI_EU
#undef CORONA_CC2500_INO
#undef E016HV2_CC2500_INO
#undef ESKY150V2_CC2500_INO
#undef FRSKYD_CC2500_INO
#undef FRSKYL_CC2500_INO
#undef FRSKYV_CC2500_INO
#if not defined(CC2500_INSTALLED)
#undef FRSKYX_CC2500_INO
#undef FRSKY_RX_CC2500_INO
#endif
#undef HITEC_CC2500_INO
#if not defined(CC2500_INSTALLED)
#undef HOTT_CC2500_INO
#endif
#undef IKEAANSLUTA_CC2500_INO
#undef REDPINE_CC2500_INO
#undef RLINK_CC2500_INO
#if not defined(CC2500_INSTALLED)
#undef SCANNER_CC2500_INO
#endif
#undef FUTABA_CC2500_INO
#undef SKYARTEC_CC2500_INO
#endif
#if not defined(NRF24L01_INSTALLED) || defined MULTI_EU
#undef ASSAN_NRF24L01_INO
#undef BAYANG_NRF24L01_INO
#if not defined(NRF24L01_INSTALLED)
#undef BAYANG_RX_NRF24L01_INO
#endif
#undef BUGSMINI_NRF24L01_INO
#undef CABELL_NRF24L01_INO
#undef CFLIE_NRF24L01_INO
#undef CG023_NRF24L01_INO
#undef CX10_NRF24L01_INO
#undef DM002_NRF24L01_INO
#undef E016H_NRF24L01_INO
#undef EAZYRC_NRF24L01_INO
#undef ESKY_NRF24L01_INO
#undef ESKY150_NRF24L01_INO
#undef FQ777_NRF24L01_INO
#undef FX_NRF24L01_INO
#undef FY326_NRF24L01_INO
#undef GW008_NRF24L01_INO
#undef H8_3D_NRF24L01_INO
#undef HISKY_NRF24L01_INO
#undef HONTAI_NRF24L01_INO
#undef JJRC345_NRF24L01_INO
#undef KN_NRF24L01_INO
#undef KYOSHO2_NRF24L01_INO
#undef LOLI_NRF24L01_INO
#undef MOULDKG_NRF24L01_INO
#undef NCC1701_NRF24L01_INO
#undef POTENSIC_NRF24L01_INO
#undef PROPEL_NRF24L01_INO
#undef REALACC_NRF24L01_INO
#undef SGF22_NRF24L01_INO
#undef SHENQI_NRF24L01_INO
#undef SYMAX_NRF24L01_INO
#undef V2X2_NRF24L01_INO
#undef V761_NRF24L01_INO
#undef XERALL_NRF24L01_INO
#undef YD717_NRF24L01_INO
#undef ZSX_NRF24L01_INO
#endif
#if ( not defined(CC2500_INSTALLED) && not defined(NRF24L01_INSTALLED) ) || defined MULTI_EU
#undef BLUEFLY_CCNRF_INO
#undef BUMBLEB_CCNRF_INO
#undef GD00X_CCNRF_INO
#undef KF606_CCNRF_INO
#undef MJXQ_CCNRF_INO
#undef MT99XX_CCNRF_INO
#undef OMP_CCNRF_INO
#undef Q303_CCNRF_INO
#undef Q90C_CCNRF_INO
#undef SLT_CCNRF_INO
#undef V911S_CCNRF_INO
#undef XK_CCNRF_INO
#undef XK2_CCNRF_INO
#endif
#if defined(MCU_STM32F103C8)
#undef BUMBLEB_CCNRF_INO
#endif
#if not defined(DSM_CYRF6936_INO)
#undef LOSI_CYRF6936_INO
#endif
#if not defined(STM32_BOARD)
//RF2500 emulation does not work on atmega...
#undef E010R5_CYRF6936_INO
#undef E129_CYRF6936_INO
#endif
#if not defined(STM32_BOARD)
#undef SX1276_INSTALLED
#endif
#if not defined(SX1276_INSTALLED) || defined MULTI_EU
#undef FRSKYR9_SX1276_INO
#endif
#ifdef MULTI_AIR
#undef JOYSWAY_A7105_INO
//#undef KYOSHO_A7105_INO
//#undef PELIKAN_A7105_INO
#undef LOSI_CYRF6936_INO //Need DSM to be enabled
#undef TRAXXAS_CYRF6936_INO
#undef EAZYRC_NRF24L01_INO
#undef KYOSHO2_NRF24L01_INO
#undef KYOSHO3_CYRF6936_INO
#undef MOULDKG_NRF24L01_INO
#undef SHENQI_NRF24L01_INO
#endif
#ifdef MULTI_SURFACE
#undef BUGS_A7105_INO
#undef HEIGHT_A7105_INO
#undef HUBSAN_A7105_INO
#undef E010R5_CYRF6936_INO
#undef E01X_CYRF6936_INO
#undef E129_CYRF6936_INO
#undef J6PRO_CYRF6936_INO
#undef SCORPIO_CYRF6936_INO
#undef E016HV2_CC2500_INO
#undef ESKY150V2_CC2500_INO
#undef IKEAANSLUTA_CC2500_INO // This is mostly a "for-fun" kind of a thing, not needed for most users
#undef SKYARTEC_CC2500_INO
#undef REDPINE_CC2500_INO
#undef BAYANG_NRF24L01_INO
#undef BAYANG_RX_NRF24L01_INO
#undef BUGSMINI_NRF24L01_INO
#undef CABELL_NRF24L01_INO
#undef CFLIE_NRF24L01_INO
#undef CG023_NRF24L01_INO
#undef CX10_NRF24L01_INO
#undef DM002_NRF24L01_INO
#undef E016H_NRF24L01_INO
#undef ESKY_NRF24L01_INO
#undef ESKY150_NRF24L01_INO
#undef FQ777_NRF24L01_INO
#undef FX_NRF24L01_INO
#undef FY326_NRF24L01_INO
#undef GW008_NRF24L01_INO
#undef HONTAI_NRF24L01_INO
#undef H8_3D_NRF24L01_INO
#undef JJRC345_NRF24L01_INO
#undef KN_NRF24L01_INO
#undef LOLI_NRF24L01_INO
#undef NCC1701_NRF24L01_INO
#undef POTENSIC_NRF24L01_INO
#undef PROPEL_NRF24L01_INO
#undef REALACC_NRF24L01_INO
#undef SGF22_NRF24L01_INO
#undef SYMAX_NRF24L01_INO
#undef V761_NRF24L01_INO
#undef XERALL_NRF24L01_INO
#undef YD717_NRF24L01_INO
#undef ZSX_NRF24L01_INO
#undef GD00X_CCNRF_INO
#undef KF606_CCNRF_INO
#undef MJXQ_CCNRF_INO
#undef MT99XX_CCNRF_INO
#undef OMP_CCNRF_INO
#undef Q303_CCNRF_INO
#undef Q90C_CCNRF_INO
#undef V911S_CCNRF_INO
#undef SGF22_NRF24L01_INO
#endif
//OpenTX 2.3.x issue
#if defined (FRSKYD_CC2500_INO) || defined(FRSKYV_CC2500_INO) || defined(FRSKYX_CC2500_INO)
#define FRSKYX_CC2500_INO
#define FRSKY_RX_CC2500_INO
#endif
//Make sure telemetry is selected correctly
#ifndef TELEMETRY
#undef INVERT_TELEMETRY
#undef AFHDS2A_FW_TELEMETRY
#undef AFHDS2A_HUB_TELEMETRY
#undef HITEC_FW_TELEMETRY
#undef HITEC_HUB_TELEMETRY
#undef BAYANG_HUB_TELEMETRY
#undef CABELL_HUB_TELEMETRY
#undef HUBSAN_HUB_TELEMETRY
#undef BUGS_HUB_TELEMETRY
#undef NCC1701_HUB_TELEMETRY
#undef HUB_TELEMETRY
#undef SPORT_TELEMETRY
#undef SPORT_SEND
#undef DSM_TELEMETRY
#undef MULTI_TELEMETRY
#undef SCANNER_TELEMETRY
#undef SCANNER_CC2500_INO
#undef FRSKY_RX_TELEMETRY
#undef FRSKY_RX_CC2500_INO
#undef AFHDS2A_RX_TELEMETRY
#undef AFHDS2A_RX_A7105_INO
#undef HOTT_FW_TELEMETRY
#undef BAYANG_RX_TELEMETRY
#undef BAYANG_RX_NRF24L01_INO
#undef DEVO_HUB_TELEMETRY
#undef PROPEL_HUB_TELEMETRY
#undef OMP_HUB_TELEMETRY
#undef V761_HUB_TELEMETRY
#undef RLINK_HUB_TELEMETRY
#undef DSM_RX_CYRF6936_INO
#undef DSM_FWD_PGM
#undef WFLY2_HUB_TELEMETRY
#undef LOLI_HUB_TELEMETRY
#undef MT99XX_HUB_TELEMETRY
#undef MLINK_HUB_TELEMETRY
#undef MLINK_FW_TELEMETRY
#undef MULTI_CONFIG_INO
#else
#if not defined(SCANNER_CC2500_INO) || not defined(SCANNER_TELEMETRY)
#undef SCANNER_TELEMETRY
#undef SCANNER_CC2500_INO
#endif
#if not defined(FRSKY_RX_CC2500_INO) || not defined(FRSKY_RX_TELEMETRY)
#undef FRSKY_RX_TELEMETRY
#undef FRSKY_RX_CC2500_INO
#endif
#if not defined(AFHDS2A_RX_A7105_INO) || not defined(AFHDS2A_RX_TELEMETRY)
#undef AFHDS2A_RX_TELEMETRY
#undef AFHDS2A_RX_A7105_INO
#endif
#if not defined(BAYANG_RX_NRF24L01_INO) || not defined(BAYANG_RX_TELEMETRY)
#undef BAYANG_RX_TELEMETRY
#undef BAYANG_RX_NRF24L01_INO
#endif
#if not defined(BAYANG_NRF24L01_INO)
#undef BAYANG_HUB_TELEMETRY
#endif
#if not defined(DEVO_CYRF6936_INO)
#undef DEVO_HUB_TELEMETRY
#endif
#if not defined(OMP_CCNRF_INO)
#undef OMP_HUB_TELEMETRY
#endif
#if not defined(V761_NRF24L01_INO)
#undef V761_HUB_TELEMETRY
#endif
#if not defined(PROPEL_NRF24L01_INO)
#undef PROPEL_HUB_TELEMETRY
#endif
#if not defined(NCC1701_NRF24L01_INO)
#undef NCC1701_HUB_TELEMETRY
#endif
#if not defined(BUGS_A7105_INO) && not defined(BUGSMINI_NRF24L01_INO)
#undef BUGS_HUB_TELEMETRY
#endif
#if not defined(CABELL_NRF24L01_INO)
#undef CABELL_HUB_TELEMETRY
#endif
#if not defined(RLINK_CC2500_INO)
#undef RLINK_HUB_TELEMETRY
#endif
#if not defined(HUBSAN_A7105_INO)
#undef HUBSAN_HUB_TELEMETRY
#endif
#if not defined(AFHDS2A_A7105_INO)
#undef AFHDS2A_HUB_TELEMETRY
#undef AFHDS2A_FW_TELEMETRY
#endif
#if not defined(HITEC_CC2500_INO)
#undef HITEC_HUB_TELEMETRY
#undef HITEC_FW_TELEMETRY
#endif
#if not defined(FRSKYX_CC2500_INO) && not defined(FRSKYR9_SX1276_INO)
#undef SPORT_TELEMETRY
#undef SPORT_SEND
#endif
#if not defined (SPORT_TELEMETRY)
#undef SPORT_SEND
#endif
#if not defined(DSM_CYRF6936_INO)
#undef DSM_TELEMETRY
#undef DSM_FWD_PGM
#endif
#if not defined(MLINK_CYRF6936_INO)
#undef MLINK_HUB_TELEMETRY
#undef MLINK_FW_TELEMETRY
#endif
#if not defined(HOTT_CC2500_INO)
#undef HOTT_FW_TELEMETRY
#endif
#if not defined(WFLY2_A7105_INO)
#undef WFLY2_HUB_TELEMETRY
#endif
#if not defined(LOLI_NRF24L01_INO)
#undef LOLI_HUB_TELEMETRY
#endif
#if not defined(MT99XX_CCNRF_INO)
#undef MT99XX_HUB_TELEMETRY
#endif
#if not defined(FRSKYD_CC2500_INO) && not defined(MLINK_HUB_TELEMETRY) && not defined(BAYANG_HUB_TELEMETRY)
//protocols using FRSKYD user frames
#undef HUB_TELEMETRY
#endif
#if not defined(HOTT_FW_TELEMETRY) && not defined(DSM_TELEMETRY) && not defined(SPORT_TELEMETRY) && not defined(HUB_TELEMETRY) && not defined(HUBSAN_HUB_TELEMETRY) && not defined(BUGS_HUB_TELEMETRY) && not defined(NCC1701_HUB_TELEMETRY) && not defined(BAYANG_HUB_TELEMETRY) && not defined(CABELL_HUB_TELEMETRY) && not defined(RLINK_HUB_TELEMETRY) && not defined(AFHDS2A_HUB_TELEMETRY) && not defined(AFHDS2A_FW_TELEMETRY) && not defined(MULTI_TELEMETRY) && not defined(MULTI_STATUS) && not defined(HITEC_HUB_TELEMETRY) && not defined(HITEC_FW_TELEMETRY) && not defined(SCANNER_TELEMETRY) && not defined(FRSKY_RX_TELEMETRY) && not defined(AFHDS2A_RX_TELEMETRY) && not defined(BAYANG_RX_TELEMETRY) && not defined(DEVO_HUB_TELEMETRY) && not defined(PROPEL_HUB_TELEMETRY) && not defined(OMP_HUB_TELEMETRY) && not defined(V761_HUB_TELEMETRY) && not defined(WFLY2_HUB_TELEMETRY) && not defined(LOLI_HUB_TELEMETRY) && not defined(MLINK_HUB_TELEMETRY) && not defined(MLINK_FW_TELEMETRY) && not defined(MT99XX_HUB_TELEMETRY) && not defined(MULTI_CONFIG_INO)
#undef TELEMETRY
#undef INVERT_TELEMETRY
#undef MULTI_TELEMETRY
#endif
#endif
#if defined(MLINK_HUB_TELEMETRY) && defined(MLINK_FW_TELEMETRY)
#error "You must select MLINK_HUB_TELEMETRY or MLINK_FW_TELEMETRY, not both."
#endif
#ifdef SPORT_TELEMETRY
#define SPORT_SEND
#endif
#if not defined(STM32_BOARD)
#undef MULTI_SYNC
#endif
#if not defined(MULTI_TELEMETRY)
#undef MULTI_SYNC
#endif
//Make sure TX is defined correctly
#ifndef AILERON
#error You must select a correct channel order.
#endif
#if not defined(PPM_MAX_100) || not defined(PPM_MIN_100)
#error You must set correct PPM end points for your TX.
#endif
#if defined(ENABLE_BIND_CH)
#if BIND_CH<4
#error BIND_CH must be above 4.
#endif
#if BIND_CH>16
#error BIND_CH must be below or equal to 16.
#endif
#endif
#if defined(DSM_THROTTLE_KILL_CH)
#if DSM_THROTTLE_KILL_CH<4
#error DSM_THROTTLE_KILL_CH must be above 4.
#endif
#if DSM_THROTTLE_KILL_CH>16
#error DSM_THROTTLE_KILL_CH must be below or equal to 16.
#endif
#endif
#if defined(AFHDS2A_LQI_CH)
#if AFHDS2A_LQI_CH<4
#error AFHDS2A_LQI_CH must be above 4.
#endif
#if AFHDS2A_LQI_CH>14
#error AFHDS2A_LQI_CH must be below or equal to 14.
#endif
#endif
#if MIN_PPM_CHANNELS>16
#error MIN_PPM_CHANNELS must be below or equal to 16. The default for this value is 4.
#endif
#if MIN_PPM_CHANNELS<2
#error MIN_PPM_CHANNELS must be larger than 1. The default for this value is 4.
#endif
#if MAX_PPM_CHANNELS<MIN_PPM_CHANNELS
#error MAX_PPM_CHANNELS must be higher than MIN_PPM_CHANNELS. The default for this value is 16.
#endif
#if MAX_PPM_CHANNELS>16
#error MAX_PPM_CHANNELS must be below or equal to 16. The default for this value is 16.
#endif
#if defined (STM32_BOARD) && defined (DEBUG_SERIAL)
#undef SEND_CPPM
#ifdef NRF24L01_INSTALLED
#define XN297DUMP_NRF24L01_INO
#endif
#endif
#if not defined (STM32_BOARD) || not defined (TELEMETRY) || (not defined (FRSKY_RX_TELEMETRY) && not defined (AFHDS2A_RX_TELEMETRY) && not defined (BAYANG_RX_TELEMETRY) && not defined (DSM_RX_CYRF6936_INO))
#undef SEND_CPPM
#endif
//Check if Direct inputs defined correctly
#if defined (ENABLE_DIRECT_INPUTS)
#if not defined (STM32_BOARD) || not defined (ENABLE_PPM) || defined (ENABLE_SERIAL)
#error You can enable dirct inputs only in PPM mode and only for STM32 board.
#endif
#if not defined (DI1_PIN) && not defined (DI2_PIN) && not defined (DI3_PIN) && not defined (DI4_PIN)
#error You must define at least 1 direct input pin or undefine ENABLE_DIRECT_INPUTS in config.
#endif
#if not defined (DI_CH1_read) && not defined (DI_CH2_read) && not defined (DI_CH3_read) && not defined (DI_CH4_read)
#error You must define at least 1 direct input chanell read macros or undefine ENABLE_DIRECT_INPUTS in config.
#endif
#endif
Reference in New Issue View Git Blame Copy Permalink