139cd4c583
* #751 DSM Enhancements #751 DSM Forward Programming Enhancements (New GUI, etc) * Make both work on EdgeTx and OpenTX * #751 Turn OFF simulation by default Distribution code with RX simulation OFF Simulation should be only for Development * #751 Update Readme Documentation Updated the Readme.txt documentation and removed compiled luac file that was check in by mistake * #751 Fix problems With Reset RX 1. Fix problem when trying to Factory Reset. Enter Bind Mode. Save backup, Restore Backup 2. Found a way to advance on the Gyro initial Setup menus.. a bit of a hack, but works. 3. Handle RX resets properly. It needed after initial setup * #751 Cosmetic and Show Orientation Images #751 1. Fix problems when text contradictions between Menu/Line Headers and List Values 2. Show Images of RX orientations 3. Able to Hack getting into Initial Setup and other menus who was failing before 4. Custumize the way Flight Mode reports the Value on Screen * #751 add check for required libraries Add check that the required files in DSMLIB exist * #751 Write documentation about the protocol so that we don't forget later what we know, and enable others to understand the logs and maybe help solve problems. * #766 Change the way to detect that the files exist. now works on both ETX and OTX * #766 Strange Flickering in OTX Strange Flickering happening on OTX. Refreshing the screen on every cycle fixed the problem * #766 Change way of dectecting EdgeTX Change way of detecting OTX in multiple versions: OTX 2.3.14 and 2.3.15 * #766 make editable Gain Values Gains and other settings should be editable even when they are VALUE_NOCHANGING. Flight Mode is an exception that is handled properly. Right align numbers. * #766 More enhacements Added AR630 Make numbers right justified Cleanup some log messages and line types. Updated DSM FWD prog documentation * #751 more cosmetic things 1. Added AR10360T, 2. Simplify way to configured the hack for more receivers. 3. Change some texts on menus to march spektrum 4. Background color in Spektrum theme to match * #751 A few final changes 1. Update channel names to include channel number. i.e: Ch5 (Gear) 2, Fix flight mode display for Heli Receiver 3. i think the unknown lines are to request info about the TX settings * #751 1. Added Warning Screen 2. Correct handling of Unknown lines in Gyro Settings->Initial Setup * #751 New v0.51 version. - Added new menus to configure Model/Wing type. Without it, the initial setup will not work properly. * #751 More fixes on mixers and servo reverse -- Fix problem reversing servos when using vtail/delta mix -- Properly detect ch order of multimodule * #751 Updated channel naming and docs Updated readme documentation Consistent naming of Ch across the code. * #751 Fix message displaying data path * #751 More improvements 1. Much easier to select channels > Ch6 for FMode, Gain and Panic channels 2. B&W version for smaller screens (128x64).. Memory footprint still a problem. 3. Fix a lot typos/misspell/grammar in the documentation * Create DSM_AR636_TextGen.lua Script to show Telemetry TextGen screens for AR636 Receiver. Really useful for BLADE helis using the AR636 Could replace dsmPID.lua Still needs to be ported to smaller screens. --------- Co-authored-by: pascallanger <pascal_langer@yahoo.fr>
Multiprotocol TX Module OpenTX LUA scripts
If you like this project and want to support further development please consider making a donation.
 €5 |
€10 |
€15 |
€25 |
Other |
MultiConfig
Enables to modify on a Multi module the Global ID, Cyrf ID or format the EEPROM.
Matching the ID of 2 Multi modules enable them to control the same receivers without rebinding. Be carefull the 2 modules should not be used at the same time unless you know what you are doing.
Notes:
- Supported from Multi v1.3.2.85 or above and OpenTX 2.3.12 or above
- The Multi module to be configured must be active, if there is a second Multi module in the radio it must be off
- Located on the radio SD card under \SCRIPTS\TOOLS
MultiChannelsUpdater
Automatically name the channels based on the loaded Multi protocol and sub protocol including the module channel order convention.
Need OpenTX 2.3.9 or above. Located on the radio SD card under \SCRIPTS\TOOLS. This script needs MultiChan.txt to be present in the same folder.
MultiLOLI
Script to set the channels function (switch, servo, pwm, ppm, sbus) on a LOLI RX
Graupner HoTT
Enable text configuration of the HoTT RX and sensors: Vario, GPS, ESC, GAM and EAM.
Need OpenTX 2.3.9 or above. Located on the radio SD card under \SCRIPTS\TOOLS.
Notes:
- Menu/MDL/Model is used to cycle through the detected sensors.
- It's normal to lose the telemetry feed while using the text mode configuration. Telemetry will resume properly if the script is exited by doing a short press on the exit button.
Graupner HoTT Model Locator
This is the Graupner HoTT adapted version of the Model Locator script using RSSI.
The OpenTX sensor "RSSI" is populated by the individual OpenTX telemetry protocol implementations and returns a value from 0..100 (percent) originating from the early FrSky implementation. It turns out that FrSky did not really provide a genuine signal strength indicator in units of dbm but a link quality indicator in 0..100%. With Graupner HoTT the link quality indicator is not a good basis for the model locator as it is very non-linear and doesn't change much with distance. Using the Graupner HoTT telemetry sensor "Rssi" which is a true signal strength indicator serves the purpose of locating a model much better as it varies much more with distance.
DSM Forward Programming
This is a work in progress. It's available for color(+touch) and B&W screens.
Work on OpenTX and EdgeTX. Located on the radio SD card under \SCRIPTS\TOOLS, make sure to copy the DSMLIB folder along with DSM FwdPrg_05_Color.lua or DSM FwdPrg_05_BW.lua.
If some text appears as Unknown_xxx, please report xxx and what the exact text display should be.
DSM PID Flight log gain parameters for Blade micros
Lua telemetry script from feathering on RCGroups to facilitate setting the Gain Parameters on the Blade 150S FBL. It doesn't use Forward Programming but instead it just reads telemetry data from the Multi-module and displays it on a telemetry display.
It is very similar to the Telemetry Based Text Generator functionality on Spektrum transmitters where one doesn't need to rely on the angle of the swashplate to determine selection/value.