pascallanger 0d0acb9d10 Bind function on channel 16
Toggling channel 16 (-100%->+100%->-100%) will execute a bind only if
the loaded protocol is an autobind protocol or autobind is set AND
throttle is low (below -95%).
2017-01-02 17:04:50 +01:00

611 lines
14 KiB
C
Raw Blame History

This file contains ambiguous Unicode characters

This file contains Unicode characters that might be confused with other characters. If you think that this is intentional, you can safely ignore this warning. Use the Escape button to reveal them.

/*
This project is free software: you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation, either version 3 of the License, or
(at your option) any later version.
Multiprotocol is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with Multiprotocol. If not, see <http://www.gnu.org/licenses/>.
*/
//******************
// Version
//******************
#define VERSION_MAJOR 1
#define VERSION_MINOR 1
#define VERSION_REVISION 6
#define VERSION_PATCH_LEVEL 4
//******************
// Protocols
//******************
enum PROTOCOLS
{
MODE_SERIAL = 0, // Serial commands
MODE_FLYSKY = 1, // =>A7105
MODE_HUBSAN = 2, // =>A7105
MODE_FRSKYD = 3, // =>CC2500
MODE_HISKY = 4, // =>NRF24L01
MODE_V2X2 = 5, // =>NRF24L01
MODE_DSM = 6, // =>CYRF6936
MODE_DEVO = 7, // =>CYRF6936
MODE_YD717 = 8, // =>NRF24L01
MODE_KN = 9, // =>NRF24L01
MODE_SYMAX = 10, // =>NRF24L01
MODE_SLT = 11, // =>NRF24L01
MODE_CX10 = 12, // =>NRF24L01
MODE_CG023 = 13, // =>NRF24L01
MODE_BAYANG = 14, // =>NRF24L01
MODE_FRSKYX = 15, // =>CC2500
MODE_ESKY = 16, // =>NRF24L01
MODE_MT99XX = 17, // =>NRF24L01
MODE_MJXQ = 18, // =>NRF24L01
MODE_SHENQI = 19, // =>NRF24L01
MODE_FY326 = 20, // =>NRF24L01
MODE_SFHSS = 21, // =>CC2500
MODE_J6PRO = 22, // =>CYRF6936
MODE_FQ777 = 23, // =>NRF24L01
MODE_ASSAN = 24, // =>NRF24L01
MODE_FRSKYV = 25, // =>CC2500
MODE_HONTAI = 26, // =>NRF24L01
MODE_OPENLRS = 27, // =>OpenLRS hardware
MODE_AFHDS2A = 28, // =>A7105
MODE_Q2X2 = 29, // =>NRF24L01, extension of CX-10 protocol
};
enum Flysky
{
Flysky = 0,
V9X9 = 1,
V6X6 = 2,
V912 = 3,
CX20 = 4
};
enum AFHDS2A
{
PWM_IBUS = 0,
PPM_IBUS = 1,
PWM_SBUS = 2,
PPM_SBUS = 3,
};
enum Hisky
{
Hisky = 0,
HK310 = 1
};
enum DSM
{
DSM2_22 = 0,
DSM2_11 = 1,
DSMX_22 = 2,
DSMX_11 = 3,
DSM_AUTO = 4
};
enum YD717
{
YD717 = 0,
SKYWLKR = 1,
SYMAX4 = 2,
XINXUN = 3,
NIHUI = 4
};
enum KN
{
WLTOYS = 0,
FEILUN = 1
};
enum SYMAX
{
SYMAX = 0,
SYMAX5C = 1
};
enum SLT
{
SLT = 0,
VISTA = 1
};
enum CX10
{
CX10_GREEN = 0,
CX10_BLUE = 1, // also compatible with CX10-A, CX12
DM007 = 2,
JC3015_1 = 4,
JC3015_2 = 5,
MK33041 = 6,
};
enum Q2X2
{
Q222 = 8,
Q242 = 9,
Q282 = 10,
};
enum CG023
{
CG023 = 0,
YD829 = 1,
H8_3D = 2
};
enum BAYANG
{
BAYANG = 0,
H8S3D = 1
};
enum MT99XX
{
MT99 = 0,
H7 = 1,
YZ = 2,
LS = 3,
FY805 = 4
};
enum MJXQ
{
WLH08 = 0,
X600 = 1,
X800 = 2,
H26D = 3,
E010 = 4,
H26WH = 5,
};
enum FRSKYX
{
CH_16 = 0,
CH_8 = 1,
};
enum HONTAI
{
FORMAT_HONTAI = 0,
FORMAT_JJRCX1 = 1,
FORMAT_X5C1 = 2,
FORMAT_FQ777_951 =3
};
enum V2X2
{
V2X2 = 0,
JXD506 = 1,
};
enum FY326
{
FY326 = 0,
FY319 = 1,
};
#define NONE 0
#define P_HIGH 1
#define P_LOW 0
#define AUTOBIND 1
#define NO_AUTOBIND 0
struct PPM_Parameters
{
uint8_t protocol : 6;
uint8_t sub_proto : 3;
uint8_t rx_num : 4;
uint8_t power : 1;
uint8_t autobind : 1;
uint8_t option;
};
// Telemetry
enum MultiPacketTypes {
MULTI_TELEMETRY_STATUS = 1,
MULTI_TELEMETRY_SPORT = 2,
MULTI_TELEMETRY_HUB = 3,
MULTI_TELEMETRY_DSM = 4,
MULTI_TELEMETRY_DSMBIND = 5,
MULTI_TELEMETRY_AFHDS2A = 6,
};
// Macros
#define NOP() __asm__ __volatile__("nop")
//***************
//*** Flags ***
//***************
#define RX_FLAG_on protocol_flags |= _BV(0)
#define RX_FLAG_off protocol_flags &= ~_BV(0)
#define IS_RX_FLAG_on ( ( protocol_flags & _BV(0) ) !=0 )
//
#define CHANGE_PROTOCOL_FLAG_on protocol_flags |= _BV(1)
#define CHANGE_PROTOCOL_FLAG_off protocol_flags &= ~_BV(1)
#define IS_CHANGE_PROTOCOL_FLAG_on ( ( protocol_flags & _BV(1) ) !=0 )
//
#define POWER_FLAG_on protocol_flags |= _BV(2)
#define POWER_FLAG_off protocol_flags &= ~_BV(2)
#define IS_POWER_FLAG_on ( ( protocol_flags & _BV(2) ) !=0 )
//
#define RANGE_FLAG_on protocol_flags |= _BV(3)
#define RANGE_FLAG_off protocol_flags &= ~_BV(3)
#define IS_RANGE_FLAG_on ( ( protocol_flags & _BV(3) ) !=0 )
//
#define AUTOBIND_FLAG_on protocol_flags |= _BV(4)
#define AUTOBIND_FLAG_off protocol_flags &= ~_BV(4)
#define IS_AUTOBIND_FLAG_on ( ( protocol_flags & _BV(4) ) !=0 )
//
#define BIND_BUTTON_FLAG_on protocol_flags |= _BV(5)
#define BIND_BUTTON_FLAG_off protocol_flags &= ~_BV(5)
#define IS_BIND_BUTTON_FLAG_on ( ( protocol_flags & _BV(5) ) !=0 )
//PPM RX OK
#define PPM_FLAG_off protocol_flags &= ~_BV(6)
#define PPM_FLAG_on protocol_flags |= _BV(6)
#define IS_PPM_FLAG_on ( ( protocol_flags & _BV(6) ) !=0 )
//Bind flag
#define BIND_IN_PROGRESS protocol_flags &= ~_BV(7)
#define BIND_DONE protocol_flags |= _BV(7)
#define IS_BIND_DONE_on ( ( protocol_flags & _BV(7) ) !=0 )
//
#define BAD_PROTO_off protocol_flags2 &= ~_BV(0)
#define BAD_PROTO_on protocol_flags2 |= _BV(0)
#define IS_BAD_PROTO_on ( ( protocol_flags2 & _BV(0) ) !=0 )
//
#define RX_DONOTUPDTAE_off protocol_flags2 &= ~_BV(1)
#define RX_DONOTUPDTAE_on protocol_flags2 |= _BV(1)
#define IS_RX_DONOTUPDTAE_on ( ( protocol_flags2 & _BV(1) ) !=0 )
//
#define RX_MISSED_BUFF_off protocol_flags2 &= ~_BV(2)
#define RX_MISSED_BUFF_on protocol_flags2 |= _BV(2)
#define IS_RX_MISSED_BUFF_on ( ( protocol_flags2 & _BV(2) ) !=0 )
//TX Pause
#define TX_MAIN_PAUSE_off protocol_flags2 &= ~_BV(3)
#define TX_MAIN_PAUSE_on protocol_flags2 |= _BV(3)
#define IS_TX_MAIN_PAUSE_on ( ( protocol_flags2 & _BV(3) ) !=0 )
#define TX_RX_PAUSE_off protocol_flags2 &= ~_BV(4)
#define TX_RX_PAUSE_on protocol_flags2 |= _BV(4)
#define IS_TX_RX_PAUSE_on ( ( protocol_flags2 & _BV(4) ) !=0 )
#define IS_TX_PAUSE_on ( ( protocol_flags2 & (_BV(4)|_BV(3)) ) !=0 )
//Signal OK
#define INPUT_SIGNAL_off protocol_flags2 &= ~_BV(5)
#define INPUT_SIGNAL_on protocol_flags2 |= _BV(5)
#define IS_INPUT_SIGNAL_on ( ( protocol_flags2 & _BV(5) ) !=0 )
#define IS_INPUT_SIGNAL_off ( ( protocol_flags2 & _BV(5) ) ==0 )
//CH16
#define CH16_PREV_off protocol_flags2 &= ~_BV(6)
#define CH16_PREV_on protocol_flags2 |= _BV(6)
#define IS_CH16_PREV_on ( ( protocol_flags2 & _BV(6) ) !=0 )
#define IS_CH16_PREV_off ( ( protocol_flags2 & _BV(6) ) ==0 )
//********************
//*** Blink timing ***
//********************
#define BLINK_BIND_TIME 100
#define BLINK_SERIAL_TIME 500
#define BLINK_PPM_TIME 1000
#define BLINK_BAD_PROTO_TIME_LOW 1000
#define BLINK_BAD_PROTO_TIME_HIGH 50
//*******************
//*** AUX flags ***
//*******************
#define GET_FLAG(ch, mask) ( ch ? mask : 0)
#define Servo_AUX1 (Servo_AUX & _BV(0))
#define Servo_AUX2 (Servo_AUX & _BV(1))
#define Servo_AUX3 (Servo_AUX & _BV(2))
#define Servo_AUX4 (Servo_AUX & _BV(3))
#define Servo_AUX5 (Servo_AUX & _BV(4))
#define Servo_AUX6 (Servo_AUX & _BV(5))
#define Servo_AUX7 (Servo_AUX & _BV(6))
#define Servo_AUX8 (Servo_AUX & _BV(7))
//************************
//*** Power settings ***
//************************
enum {
TXPOWER_100uW,
TXPOWER_300uW,
TXPOWER_1mW,
TXPOWER_3mW,
TXPOWER_10mW,
TXPOWER_30mW,
TXPOWER_100mW,
TXPOWER_150mW
};
// A7105 power
// Power amp is ~+16dBm so:
enum A7105_POWER
{
A7105_POWER_0 = 0x00<<3 | 0x00, // TXPOWER_100uW = -23dBm == PAC=0 TBG=0
A7105_POWER_1 = 0x00<<3 | 0x01, // TXPOWER_300uW = -20dBm == PAC=0 TBG=1
A7105_POWER_2 = 0x00<<3 | 0x02, // TXPOWER_1mW = -16dBm == PAC=0 TBG=2
A7105_POWER_3 = 0x00<<3 | 0x04, // TXPOWER_3mW = -11dBm == PAC=0 TBG=4
A7105_POWER_4 = 0x01<<3 | 0x05, // TXPOWER_10mW = -6dBm == PAC=1 TBG=5
A7105_POWER_5 = 0x02<<3 | 0x07, // TXPOWER_30mW = 0dBm == PAC=2 TBG=7
A7105_POWER_6 = 0x03<<3 | 0x07, // TXPOWER_100mW = 1dBm == PAC=3 TBG=7
A7105_POWER_7 = 0x03<<3 | 0x07 // TXPOWER_150mW = 1dBm == PAC=3 TBG=7
};
#define A7105_HIGH_POWER A7105_POWER_7
#define A7105_LOW_POWER A7105_POWER_3
#define A7105_RANGE_POWER A7105_POWER_0
#define A7105_BIND_POWER A7105_POWER_0
// NRF Power
// Power setting is 0..3 for nRF24L01
// Claimed power amp for nRF24L01 from eBay is 20dBm.
enum NRF_POWER
{ // Raw w 20dBm PA
NRF_POWER_0 = 0x00, // 0 : -18dBm (16uW) 2dBm (1.6mW)
NRF_POWER_1 = 0x01, // 1 : -12dBm (60uW) 8dBm (6mW)
NRF_POWER_2 = 0x02, // 2 : -6dBm (250uW) 14dBm (25mW)
NRF_POWER_3 = 0x03 // 3 : 0dBm (1mW) 20dBm (100mW)
};
#define NRF_HIGH_POWER NRF_POWER_2
#define NRF_LOW_POWER NRF_POWER_1
#define NRF_RANGE_POWER NRF_POWER_0
#define NRF_BIND_POWER NRF_POWER_0
// CC2500 power output from the chip itself
// The numbers do not take into account any outside amplifier
enum CC2500_POWER
{
CC2500_POWER_0 = 0x00, // 55dbm or less
CC2500_POWER_1 = 0x50, // -30dbm
CC2500_POWER_2 = 0x44, // 28dbm
CC2500_POWER_3 = 0xC0, // 26dbm
CC2500_POWER_4 = 0x84, // 24dbm
CC2500_POWER_5 = 0x81, // 22dbm
CC2500_POWER_6 = 0x46, // 20dbm
CC2500_POWER_7 = 0x93, // 18dbm
CC2500_POWER_8 = 0x55, // 16dbm
CC2500_POWER_9 = 0x8D, // 14dbm
CC2500_POWER_10 = 0xC6, // -12dbm
CC2500_POWER_11 = 0x97, // -10dbm
CC2500_POWER_12 = 0x6E, // -8dbm
CC2500_POWER_13 = 0x7F, // -6dbm
CC2500_POWER_14 = 0xA9, // -4dbm
CC2500_POWER_15 = 0xBB, // -2dbm
CC2500_POWER_16 = 0xFE, // 0dbm
CC2500_POWER_17 = 0xFF // +1dbm
};
#define CC2500_HIGH_POWER CC2500_POWER_16
#define CC2500_LOW_POWER CC2500_POWER_13
#define CC2500_RANGE_POWER CC2500_POWER_1
#define CC2500_BIND_POWER CC2500_POWER_1
// CYRF power
enum CYRF_POWER
{
CYRF_POWER_0 = 0x00, // -35dbm
CYRF_POWER_1 = 0x01, // -30dbm
CYRF_POWER_2 = 0x02, // -24dbm
CYRF_POWER_3 = 0x03, // -18dbm
CYRF_POWER_4 = 0x04, // -13dbm
CYRF_POWER_5 = 0x05, // -5dbm
CYRF_POWER_6 = 0x06, // 0dbm
CYRF_POWER_7 = 0x07 // +4dbm
};
#define CYRF_HIGH_POWER CYRF_POWER_7
#define CYRF_LOW_POWER CYRF_POWER_3
#define CYRF_RANGE_POWER CYRF_POWER_1 // 1/30 of the full power distance
#define CYRF_BIND_POWER CYRF_POWER_0
enum TXRX_State {
TXRX_OFF,
TX_EN,
RX_EN
};
// Packet ack status values
enum {
PKT_PENDING = 0,
PKT_ACKED,
PKT_TIMEOUT
};
// baudrate defines for serial
#define SPEED_100K 0
#define SPEED_9600 1
#define SPEED_57600 2
#define SPEED_125K 3
//****************************************
//*** MULTI protocol serial definition ***
//****************************************
/*
**************************
16 channels serial protocol
**************************
Serial: 100000 Baud 8e2 _ xxxx xxxx p --
Total of 26 bytes
Stream[0] = 0x55 sub_protocol values are 0..31
Stream[0] = 0x54 sub_protocol values are 32..63
header
Stream[1] = sub_protocol|BindBit|RangeCheckBit|AutoBindBit;
sub_protocol is 0..31 (bits 0..4), value should be added with 32 if Stream[0] = 0x54
=> Reserved 0
Flysky 1
Hubsan 2
FrskyD 3
Hisky 4
V2x2 5
DSM 6
Devo 7
YD717 8
KN 9
SymaX 10
SLT 11
CX10 12
CG023 13
Bayang 14
FrskyX 15
ESky 16
MT99XX 17
MJXQ 18
SHENQI 19
FY326 20
SFHSS 21
J6PRO 22
FQ777 23
ASSAN 24
FrskyV 25
HONTAI 26
OpenLRS 27
AFHDS2A 28
Q2X2 29
BindBit=> 0x80 1=Bind/0=No
AutoBindBit=> 0x40 1=Yes /0=No
RangeCheck=> 0x20 1=Yes /0=No
Stream[2] = RxNum | Power | Type;
RxNum value is 0..15 (bits 0..3)
Type is 0..7 <<4 (bit 4..6)
sub_protocol==Flysky
Flysky 0
V9x9 1
V6x6 2
V912 3
CX20 4
sub_protocol==Hisky
Hisky 0
HK310 1
sub_protocol==DSM
DSM2_22 0
DSM2_11 1
DSMX_22 2
DSMX_11 3
DSM_AUTO 4
sub_protocol==YD717
YD717 0
SKYWLKR 1
SYMAX4 2
XINXUN 3
NIHUI 4
sub_protocol==KN
WLTOYS 0
FEILUN 1
sub_protocol==SYMAX
SYMAX 0
SYMAX5C 1
sub_protocol==CX10
CX10_GREEN 0
CX10_BLUE 1 // also compatible with CX10-A, CX12
DM007 2
--- 3
JC3015_1 4
JC3015_2 5
MK33041 6
sub_protocol==Q2X2
Q222 0
Q242 1
Q282 2
sub_protocol==SLT
SLT 0
VISTA 1
sub_protocol==CG023
CG023 0
YD829 1
H8_3D 2
sub_protocol==BAYANG
BAYANG 0
H8S3D 1
sub_protocol==MT99XX
MT99 0
H7 1
YZ 2
LS 3
FY805 4
sub_protocol==MJXQ
WLH08 0
X600 1
X800 2
H26D 3
E010 4
H26WH 5
sub_protocol==FRSKYX
CH_16 0
CH_8 1
sub_protocol==HONTAI
FORMAT_HONTAI 0
FORMAT_JJRCX1 1
FORMAT_X5C1 2
FORMAT_FQ777_951 3
sub_protocol==AFHDS2A
PWM_IBUS 0
PPM_IBUS 1
PWM_SBUS 2
PPM_SBUS 3
sub_protocol==V2X2
V2X2 0
JXD506 1
sub_protocol==FY326
FY326 0
FY319 1
Power value => 0x80 0=High/1=Low
Stream[3] = option_protocol;
option_protocol value is -127..127
Stream[4] to [25] = Channels
16 Channels on 11 bits (0..2047)
0 -125%
204 -100%
1024 0%
1843 +100%
2047 +125%
Channels bits are concatenated to fit in 22 bytes like in SBUS protocol
*/
/*
Multiprotocol telemetry definition
Serial: 100000 Baud 8e2 (same as input)
TLV Protocol (type, length, value), allows a TX to ignore unknown messages
Format: header (4 byte) + data (variable)
[0] = 'M' (0x4d)
[1] = 'P' (0x50)
The first byte is deliberatly chosen to be different from other telemetry protocols
(e.g. 0xAA for DSM/Multi, 0xAA for FlySky and 0x7e for Frsky) to allow a TX to detect
the telemetry format of older versions
[2] Type (see below)
[3] Length (excluding the 4 header bytes)
[4-xx] data
Type = 0x01 Multimodule Status:
[4] Flags
0x01 = Input signal detected
0x02 = Serial mode enabled
0x04 = protocol is valid
0x08 = module is in binding mode
[5] major
[6] minor
[7] revision
[8] patchlevel,
version of multi code, should be displayed as major.minor.revision.patchlevel
more information can be added by specifing a longer length of the type, the TX will just ignore these bytes
Type 0x02 Frksy S.port telemetry
Type 0x03 Frsky Hub telemetry
*No* usual frsky byte stuffing and without start/stop byte (0x7e)
Type 0x04 Spektrum telemetry data
data[0] RSSI
data[1-15] telemetry data
Type 0x05 DSM bind data
data[0-16] DSM bind data
technically DSM bind data is only 10 bytes but multi send 16
like with telemtry, check length field)
Type 0x06 Flysky AFHDS2 telemetry data
length: 29
data[0] = RSSI value
data[1-28] telemetry data
*/