gomaomao/DIY-Multiprotocol-TX-Module
1
0
Fork 0
mirror of https://github.com/pascallanger/DIY-Multiprotocol-TX-Module.git synced 2025-02-04 17:58:13 +00:00
Code Issues Projects Releases Wiki Activity
DIY-Multiprotocol-TX-Module/Multiprotocol
History
Michael 0616cab386
Fixes a problem where setting failsafe values was only possible once after bind and only set values for the first 12 channels. This fix allows setting failsafe values without having to rebind and sets failsafe values correctly for all possible 16 channels. (#695) 
Notes for OpenTX/EdgeTX:
This fix doesn't exhibit servo jitter if failsafe mode was left on Custom, however it is still recommended to set failsafe mode back to Receiver after setting failsafe values.
It is still necessary to wait at least 8 seconds switching back from failsafe mode Custom to failsafe mode Receiver as OpenTX/EdgeTX will trigger the data transfer in Custom mode only every 7 seconds.

Bench tested with HoTT receivers GR-16, GR-24pro, GR-32
Flight tested with HoTT receiver GR-24
2022-06-13 14:28:21 +02:00
..
_Config.h
MT99xx2/PA18: new protocol
2022-01-23 17:56:00 +01:00
_MyConfig.h.example
Change XN297 emulation layer
2021-03-17 17:05:42 +01:00
A7105_SPI.ino
Update A7105_SPI.ino
2021-04-17 11:57:00 +02:00
AFHDS2A_a7105.ino
AFHDS2A: fix issue with fs-x6b
2021-02-14 20:51:15 +01:00
AFHDS2A_Rx_a7105.ino
Removed SBUS trainer option
2021-03-06 11:33:32 +01:00
Arduino.ino
Fix potential bug with wait loops
2020-12-10 16:52:34 +01:00
ASSAN_nrf24l01.ino
NRF init changed to most likely default
2021-02-11 18:40:29 +01:00
Bayang_nrf24l01.ino
MT99xx: Added voltage telemetry for the Dragon sub protocol
2021-03-27 11:51:53 +01:00
Bayang_Rx_nrf24l01.ino
Change XN297 emulation layer
2021-03-17 17:05:42 +01:00
Binary_Signature.ino
Add module sub-type to signature
2020-11-03 08:08:10 +00:00
Bugs_a7105.ino
Protocol init function modified
2021-02-09 18:23:33 +01:00
BUGSMINI_nrf24l01.ino
BUGSMINI: fix
2021-08-25 19:05:24 +02:00
CABELL_nrf224l01.ino
Set reserved field in CABELL packet to current channel (#593)
2021-06-24 11:49:47 +02:00
CC2500_SPI.ino
Change XN297 emulation layer
2021-03-17 17:05:42 +01:00
CFlie_nrf24l01.ino
More code optimization
2021-02-12 11:21:42 +01:00
CG023_nrf24l01.ino
Update include to xn297...
2021-03-17 17:19:41 +01:00
Convert.ino
New LOLI protocol
2021-01-09 18:39:31 +01:00
Corona_cc2500.ino
Protocol init function modified
2021-02-09 18:23:33 +01:00
CX10_nrf24l01.ino
Change XN297 emulation layer
2021-03-17 17:05:42 +01:00
CYRF6936_SPI.ino
Multi config: enabled by default, LUA script update
2021-06-17 15:30:46 +02:00
Devo_cyrf6936.ino
Devo: fix typo
2021-09-16 16:13:39 +02:00
DM002_nrf24l01.ino
Change XN297 emulation layer
2021-03-17 17:05:42 +01:00
DSM_cyrf6936.ino
DSMR: new surface protocol
2021-03-30 12:10:29 +02:00
DSM_Rx_cyrf6936.ino
DSM RX: use directly the TX type and channels
2021-08-21 10:14:05 +02:00
DSM.ino
DSMR: new surface protocol
2021-03-30 12:10:29 +02:00
E01X_cyrf6936.ino
fix compilation?
2021-11-13 19:08:38 +01:00
E010R5_cyrf6936.ino
E010R5: 5th ID
2021-02-24 10:26:58 +01:00
E016H_nrf24l01.ino
Change XN297 emulation layer
2021-03-17 17:05:42 +01:00
E016HV2_cc2500.ino
Protocol init function modified
2021-02-09 18:23:33 +01:00
E129_cyrf6936.ino
SX1276: RF power adjustment for DIY & Jumper T-Lite
2021-02-21 16:05:25 +01:00
ESky150_nrf24l01.ino
More code optimization
2021-02-12 11:21:42 +01:00
ESky150v2_cc2500.ino
Change XN297 emulation layer
2021-03-17 17:05:42 +01:00
ESky_nrf24l01.ino
NRF init changed to most likely default
2021-02-11 18:40:29 +01:00
Fake_nrf24l01.ino
MT99XX Dragon telem prep
2021-02-17 10:26:38 +01:00
FlySky_a7105.ino
More code optimization
2021-02-12 11:21:42 +01:00
FQ777_nrf24l01.ino
More code optimization
2021-02-12 11:21:42 +01:00
FrSky_Rx_cc2500.ino
Removed SBUS trainer option
2021-03-06 11:33:32 +01:00
FrSkyD_cc2500.ino
Protocol init function modified
2021-02-09 18:23:33 +01:00
FrSkyDVX_common.ino
Protocol init function modified
2021-02-09 18:23:33 +01:00
FrSkyL_cc2500.ino
Protocol init function modified
2021-02-09 18:23:33 +01:00
FrSkyR9_sx1276.ino
SX1276: RF power adjustment for DIY & Jumper T-Lite
2021-02-21 16:05:25 +01:00
FrSkyV_cc2500.ino
Protocol init function modified
2021-02-09 18:23:33 +01:00
FrSkyX_cc2500.ino
FrSkyX2: changed bind bytes
2021-04-06 10:18:48 +02:00
Futaba_cc2500.ino
SFHSS: Timing debug
2021-03-02 12:01:23 +01:00
FX816_nrf24l01.ino
Change XN297 emulation layer
2021-03-17 17:05:42 +01:00
FY326_nrf24l01.ino
More code optimization
2021-02-12 11:21:42 +01:00
GD00X_ccnrf.ino
Update include to xn297...
2021-03-17 17:19:41 +01:00
GW008_nrf24l01.ino
Change XN297 emulation layer
2021-03-17 17:05:42 +01:00
H8_3D_nrf24l01.ino
Change XN297 emulation layer
2021-03-17 17:05:42 +01:00
Height_a7105.ino
Protocol init function modified
2021-02-09 18:23:33 +01:00
Hisky_nrf24l01.ino
NRF init changed to most likely default
2021-02-11 18:40:29 +01:00
Hitec_cc2500.ino
Hitec: fix freq tune
2021-04-02 17:42:44 +02:00
Hontai_nrf24l01.ino
Change XN297 emulation layer
2021-03-17 17:05:42 +01:00
HOTT_cc2500.ino
Fixes a problem where setting failsafe values was only possible once after bind and only set values for the first 12 channels. This fix allows setting failsafe values without having to rebind and sets failsafe values correctly for all possible 16 channels. (#695)
2022-06-13 14:28:21 +02:00
HS6200_EMU.ino
fix compilation?
2021-11-13 19:08:38 +01:00
Hubsan_a7105.ino
Protocol init function modified
2021-02-09 18:23:33 +01:00
iface_a7105.h
AFHDS2A protocol addition: UNTESTED
2016-10-20 19:29:52 +02:00
iface_cc2500.h
New feature: end bind
2017-02-06 18:46:34 +01:00
iface_cyrf6936.h
Core and all protocols have been updated
2016-01-20 10:51:17 +01:00
iface_hs6200.h
HS6200 emulation using CYRF for E01X protocol
2021-11-13 19:03:01 +01:00
iface_nrf24l01.h
Add more protocols which can run with the CC2500
2021-02-16 19:06:23 +01:00
iface_nrf250k.h
Change XN297 emulation layer
2021-03-17 17:05:42 +01:00
iface_rf2500.h
Move the CYRF emulation functions around for future
2021-01-21 12:24:46 +01:00
iface_sx1276.h
Update iface_sx1276.h
2020-07-03 19:51:22 +02:00
iface_xn297.h
Fix XN297Dump enhanced payload detection
2021-06-28 18:04:17 +02:00
IKEA_Ansluta_cc2500.ino
Add the IKEA Ansluta remote-controllable lighting protocol (#566)
2021-04-24 21:46:29 +02:00
J6Pro_cyrf6936.ino
Protocol init function modified
2021-02-09 18:23:33 +01:00
JJRC345_nrf24l01.ino
Update include to xn297...
2021-03-17 17:19:41 +01:00
Joysway_a7105.ino
JOYSWAY: fix?
2021-03-05 19:57:33 +01:00
KF606_ccnrf.ino
KF606/MIG320: Added LED control
2022-04-15 17:29:25 +02:00
KN_nrf24l01.ino
More code optimization
2021-02-12 11:21:42 +01:00
Kyosho_a7105.ino
Protocol init function modified
2021-02-09 18:23:33 +01:00
LOLI_nrf24l01.ino
More code optimization
2021-02-12 11:21:42 +01:00
Losi_cyrf6936.ino
Mould King: Analog and digital sub protocols
2021-05-27 19:01:08 +02:00
MJXQ_ccnrf.ino
Change XN297 emulation layer
2021-03-17 17:05:42 +01:00
MLINK_cyrf6936.ino
M-Link telemetry forwarded to OpenTX
2021-02-10 12:31:37 +01:00
MouldKg_nrf24l01.ino
Mould King: control up to 4 bricks at the same time
2021-06-20 18:39:27 +02:00
MT99xx_ccnrf.ino
Another try on PA18
2022-01-25 15:21:22 +01:00
Multi_Config.ino
Update Multi_Config.ino
2021-06-17 15:42:09 +02:00
Multi_Protos.ino
MT99xx2/PA18: new protocol
2022-01-23 17:56:00 +01:00
Multi.txt
MT99xx2/PA18: new protocol
2022-01-23 17:56:00 +01:00
MultiOrange.h
Switch all protocols to use a resolution of 2048
2018-01-08 19:37:14 +01:00
Multiprotocol.h
KF606/MIG320: Added LED control
2022-04-15 17:29:25 +02:00
Multiprotocol.ino
Another attempt
2021-09-07 16:59:06 +02:00
NanoRF_nrf24l01.ino
NRF init changed to most likely default
2021-02-11 18:40:29 +01:00
NCC1701_nrf24l01.ino
NRF init changed to most likely default
2021-02-11 18:40:29 +01:00
NRF24l01_SPI.ino
HS6200 emulation using CYRF for E01X protocol
2021-11-13 19:03:01 +01:00
NRF250K_EMU.ino
Change XN297 emulation layer
2021-03-17 17:05:42 +01:00
OMP_ccnrf.ino
Change XN297 emulation layer
2021-03-17 17:05:42 +01:00
Pelikan_a7105.ino
Pelikan/SCX24: add second hopping table
2021-04-20 22:24:01 +02:00
Pins.h
Multi 5-in-1 initial support
2020-06-06 01:57:52 +02:00
POTENSIC_nrf24l01.ino
Update include to xn297...
2021-03-17 17:19:41 +01:00
Propel_nrf24l01.ino
Update Propel_nrf24l01.ino
2021-10-24 11:04:57 +02:00
Q90C_ccnrf.ino
Update include to xn297...
2021-03-17 17:19:41 +01:00
Q303_ccnrf.ino
Update include to xn297...
2021-03-17 17:19:41 +01:00
RadioLink_cc2500.ino
RadioLink: RSSI correction
2021-07-03 14:09:28 +02:00
REALACC_nrf24l01.ino
Update include to xn297...
2021-03-17 17:19:41 +01:00
Redpine_cc2500.ino
Protocol init function modified
2021-02-09 18:23:33 +01:00
RF2500_EMU.ino
Move the CYRF emulation functions around for future
2021-01-21 12:24:46 +01:00
Scanner_cc2500.ino
Protocol init function modified
2021-02-09 18:23:33 +01:00
SHENQI_nrf24l01.ino
NRF init changed to most likely default
2021-02-11 18:40:29 +01:00
Skyartec_cc2500.ino
Protocol init function modified
2021-02-09 18:23:33 +01:00
SLT_ccnrf.ino
Add more protocols which can run with the CC2500
2021-02-16 19:06:23 +01:00
SPI.ino
New Corona protocol and autobind bug fix
2018-01-03 13:04:58 +01:00
SX1276_SPI.ino
SX1276: RF power adjustment for DIY & Jumper T-Lite
2021-02-21 16:05:25 +01:00
Symax_nrf24l01.ino
NRF init changed to most likely default
2021-02-11 18:40:29 +01:00
Telemetry.ino
added packet_in[14] to transfer HoTT device warnings to OpenTx (#627)
2021-11-04 14:57:25 +01:00
TEST_cc2500.ino
Protocol init function modified
2021-02-09 18:23:33 +01:00
Tiger_nrf24l01.ino
Update include to xn297...
2021-03-17 17:19:41 +01:00
TRAXXAS_cyrf6936.ino
Protocol init function modified
2021-02-09 18:23:33 +01:00
TX_Def.h
LOLI: adjust timing
2021-01-18 15:51:35 +01:00
V2X2_nrf24l01.ino
More code optimization
2021-02-12 11:21:42 +01:00
V761_nrf24l01.ino
V761: code cleanup
2021-09-09 08:39:37 +02:00
V911S_ccnrf.ino
V911S: increased bind time
2021-10-24 12:03:09 +02:00
Validate.h
HS6200 emulation using CYRF for E01X protocol
2021-11-13 19:03:01 +01:00
WFLY2_a7105.ino
Protocol init function modified
2021-02-09 18:23:33 +01:00
WFLY_cyrf6936.ino
Few changes...
2021-03-01 13:48:23 +01:00
WK2x01_cyrf6936.ino
Protocol init function modified
2021-02-09 18:23:33 +01:00
XERALL_nrf24l01.ino
Multi Status: send frame as soon as a new protocol is selected
2021-09-05 22:15:56 +02:00
XK_ccnrf.ino
XK: fix twitch on other channels than rudder
2021-04-24 12:54:17 +02:00
XN297_EMU.ino
Xerall protocol
2021-09-01 01:21:38 +02:00
XN297Dump_nrf24l01.ino
Update XN297Dump_nrf24l01.ino
2021-09-07 23:17:21 +02:00
YD717_nrf24l01.ino
More code optimization
2021-02-12 11:21:42 +01:00
ZSX_nrf24l01.ino
Update include to xn297...
2021-03-17 17:19:41 +01:00