mirror of
https://github.com/pascallanger/DIY-Multiprotocol-TX-Module.git
synced 2025-02-04 19:48:11 +00:00
57 lines
4.1 KiB
Markdown
57 lines
4.1 KiB
Markdown
# Manually Uploading HEX files and setting Fuses on ATmega328
|
|
|
|
|
|
**The .hex files provided are only for tests purpose. The recommended method is to use [Compiling and Programming](Compiling.md).**
|
|
|
|
There are many different options to upload a .hex firmware file to the MULTI-Module and to set the correct fuses. This document outlines an approach that uses a USBASP programmer and which is equally compatible with OSX, Windows and Linux operating systems.
|
|
|
|
1. Follow this section: [Material you need to upload the firmware](Compiling.md#material-you-need-to-upload-the-firmware)
|
|
1. Follow this section: [Install the Arduino IDE](Compiling.md#install-the-arduino-ide-and-the-multiprotocol-project-firmware)
|
|
1. Make sure to write down the location of your installation since you need to know where avrdude is installed to configure the AVR8 Burn-O-Mat. For example on a default windows installation, avrdude.exe is located in "C:\Program Files (x86)\Arduino\hardware\tools\avr\bin" where "C:\Program Files (x86)\Arduino" is the installation path.
|
|
1. Install [AVR8 Burn-O-Mat](http://avr8-burn-o-mat.brischalle.de/avr8_burn_o_mat_avrdude_gui_en.php) which is available for all platforms. Installation instructions are on the software page (Don't forget to install [Java](http://java.sun.com/javase/downloads) as explained).
|
|
1. Launch AVR8 Burn-O-Mat.
|
|
1. You should now have a window which looks like this: <br> <img src="images/AVR8BurnOMat-main.png" />
|
|
1. Click on **Settings->AVRDUDE** and fill in the details about avrdude location using the installation path written previously as well as selecting USBASP for the programmer: <br> <img src="images/AVR8BurnOMat-settings.png" />
|
|
1. Once done click on OK.
|
|
1. You are now done with all the installations/configuration and ready to program your Multi-module.
|
|
|
|
## Fuse settings
|
|
The fuse settings have to be done only once for all.
|
|
|
|
Here are some fuse settings for common configurations:
|
|
|
|
Board|Extended Fuse (efuse)|High Fuse (hfuse)|Low Fuse (lfuse)
|
|
-----|--------|---------|-------------
|
|
Banggood 4-in-1 module |0xFD|0xD3|0xFF
|
|
Arduino Pro Mini |0xFD|0xD3|0xFF
|
|
DIY 2.3d PCB |0xFD|0xD3|0xFF
|
|
DIY 2.3d PCB with [custom mikeb bootloader](Advanced_ATmega_Serial_Uploader.md) |0xFD|0xD6|0xFF
|
|
Banggood 4-in-1 module with [custom mikeb bootloader](Advanced_ATmega_Serial_Uploader.md) |0xFD|0xD6|0xFF
|
|
|
|
If you don't know which one to take the 1st line is the one you want.
|
|
|
|
### Burn the fuses
|
|
1. Follow this section: [Connect the programmer](Compiling.md#connect-the-programmer)
|
|
1. Launch AVR8 Burn-O-Mat.
|
|
1. In the **AVR type** drop down select **ATmega328P** and click on **Fuses**
|
|
1. In the **ATmega328P Fuses** window which just open click on read fuses.
|
|
1. Ignore the error "warning : Can not Set sck period . usbasp please check for firmware update .".
|
|
1. If you get an error there is something wrong with your connections, your programmer, or your board. Verify everything and go back to the 1st bullet point.
|
|
1. Set the 3 Fuse values <br> <img src="images/AVR8BurnOMat-fuses.png" />
|
|
1. Click on **apply**
|
|
1. Click on **write fuses**
|
|
1. Ignore the error "warning : Can not Set sck period . usbasp please check for firmware update .".
|
|
1. If you get an error there is something wrong with your connections, your programmer, or your board. Verify everything and go back to the 1st bullet point.
|
|
1. You are done with setting the Fuses and can close the **ATmega328P Fuses** window
|
|
|
|
## Upload the firmware
|
|
1. Follow this section: [Connect the programmer](Compiling.md#connect-the-programmer)
|
|
1. Download the [latest release firmware](https://github.com/pascallanger/DIY-Multiprotocol-TX-Module/releases) you want to burn and store it in a knwon location
|
|
1. Launch AVR8 Burn-O-Mat.
|
|
1. In the **AVR type** drop down select **ATmega328P**
|
|
1. Under **Flash** select the file you've just downloaded
|
|
1. Under **Flash** click on **Write**
|
|
1. Ignore the error "warning : Can not Set sck period . usbasp please check for firmware update .".
|
|
1. If you get an error there is something wrong with your connections, your programmer, or your board. Verify everything and go back to the 1st bullet point.
|
|
1. You are done with uploading the firmware. Your module is ready to operate.
|