gomaomao/DIY-Multiprotocol-TX-Module
1
0
Fork 0
mirror of https://github.com/pascallanger/DIY-Multiprotocol-TX-Module.git synced 2025-02-04 19:38:13 +00:00
Code Issues Projects Releases Wiki Activity
DIY-Multiprotocol-TX-Module/Lua_scripts/DSMLIB/DsmSetupLib.lua
Frankie Arzu b2f8f482bb
V0.54 Enhacements (#846) 
* #751 DSM Enhancements

 #751 DSM Forward Programming Enhancements (New GUI, etc)

* Make both work on EdgeTx and OpenTX

* #751 Turn OFF simulation by default

Distribution code with RX simulation OFF
Simulation should be only for Development

* #751 Update Readme Documentation

Updated the Readme.txt documentation
and removed compiled luac file that was check in by mistake

* #751 Fix problems With Reset RX

1. Fix problem when trying to Factory Reset. Enter Bind Mode. Save backup, Restore Backup

2. Found a way to advance on the Gyro initial Setup menus.. a bit of a hack, but works.

3. Handle RX resets properly. It needed after initial setup

* #751 Cosmetic and Show Orientation Images

#751
1. Fix problems when text contradictions between Menu/Line Headers and List Values
2. Show Images of RX orientations
3. Able to Hack getting into Initial Setup and other menus who was failing before
4. Custumize the way Flight Mode reports the Value on Screen

* #751 add check for required libraries

Add check that the required files in DSMLIB exist

* #751

Write documentation about the protocol so that we don't forget later what we know, and enable others to understand the logs and maybe help solve problems.

* #766

Change the way to detect that the files exist. now works on both ETX and OTX

* #766 Strange Flickering in OTX

Strange Flickering happening on OTX. Refreshing the screen on every cycle fixed the problem

* #766 Change way of dectecting EdgeTX

Change way of detecting OTX in multiple versions: OTX 2.3.14 and 2.3.15

* #766  make editable Gain Values

Gains and other settings should be editable even when they are VALUE_NOCHANGING. Flight Mode is an exception that is handled properly. Right align numbers.

* #766 More enhacements

Added AR630
Make numbers right justified
Cleanup some log messages and line types.
Updated DSM FWD prog documentation

* #751 more cosmetic things

1. Added AR10360T,
2. Simplify way to configured the hack for more receivers.
3. Change some texts on menus to march spektrum
4. Background color in Spektrum theme to match

* #751 A few final changes

1. Update channel names to include channel number. i.e: Ch5 (Gear)
2,  Fix flight mode display for Heli Receiver
3. i think the unknown lines are to request info about the TX settings

* #751

1. Added Warning Screen
2. Correct handling of Unknown lines in Gyro Settings->Initial Setup

* #751

New v0.51 version.
- Added new menus to configure Model/Wing type.  Without it, the initial setup will not work properly.

* #751 More fixes on mixers and servo reverse

-- Fix problem reversing servos when using vtail/delta mix
-- Properly detect ch order of multimodule

* #751 Updated channel naming and docs

Updated readme documentation
Consistent naming of Ch across the code.

* #751 Fix message displaying data path

* #751  More improvements

1. Much easier to select channels > Ch6 for FMode, Gain and Panic channels
2. B&W version for smaller screens (128x64).. Memory footprint still a problem.
3. Fix a lot typos/misspell/grammar in the documentation

* Create DSM_AR636_TextGen.lua

Script to show Telemetry TextGen screens
for AR636 Receiver.
Really useful for BLADE helis using the AR636

Could replace dsmPID.lua

Still needs to be ported to smaller screens.

* #751 Enhancements for Lua Script tools

Enhancements

* Delete DSM_AR636_TextGen.lua

The TextGen functionality is included in DSM_AR636_Tel.lua. No longer needed

* Version 0.54

1. Fix problem with "Attitude Trim" Menu
2. New "MINimalistic" version for radios with very low memory
3. Externalized menu messages shared by all versions. the idea is to allow to translate it into other languages.
4. Correction of TextGen tools to work on black&white radios (some Lua functional differences). TextGen will be working on EdgeTx 2,8.3

---------

Co-authored-by: pascallanger <pascal_langer@yahoo.fr>
2023-04-16 21:42:31 +02:00

1108 lines
47 KiB
Lua
Raw Permalink Blame History

---- #########################################################################
---- # #
---- # Copyright (C) OpenTX #
-----# #
---- # License GPLv2: http://www.gnu.org/licenses/gpl-2.0.html #
---- # #
---- # This program is free software; you can redistribute it and/or modify #
---- # it under the terms of the GNU General Public License version 2 as #
---- # published by the Free Software Foundation. #
---- # #
---- # This program is distributed in the hope that it will be useful #
---- # but WITHOUT ANY WARRANTY; without even the implied warranty of #
---- # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the #
---- # GNU General Public License for more details. #
---- # #
---- #########################################################################
------------------------------------------------------------------------------
-- This scrip does the airplane Setup similar to how a a Spektrum radio does
-- it. You can select the plane type, the Wing type, etc.
-- This settings are needed for ForwardProgramming to send the TX aircraft
-- configuration to the RX when in Initial Setup
-- Author: Francisco Arzu
------------------------------------------------------------------------------
local DEBUG_ON, SIMULATION_ON = ... -- Get DebugON from parameters
local SETUP_LIB_VERSION = "0.54"
local DATA_PATH = "/MODELS/DSMDATA" -- Path to store model settings files
local dsmLib = assert(loadScript("/SCRIPTS/TOOLS/DSMLIB/DsmFwPrgLib.lua"))(DEBUG_ON)
local PHASE = dsmLib.PHASE
local LINE_TYPE = dsmLib.LINE_TYPE
local CH_TYPE = dsmLib.CH_TYPE
local MODEL = dsmLib.MODEL
local AIRCRAFT_TYPE = {
PLANE = 0,
HELI = 1,
GLIDER = 2,
DRONE = 3
}
local aircraft_type_text = {[0]="Plane","Heli","Glider","Drone"}
local WING_TYPE = {
AIL_1 = 0, --1
AIL_2 = 1, --2
FLAPERON = 2, --2
AIL_1_FLP_1 = 3, --2
AIL_2_FLP_1 = 4, --3
AIL_2_FLP_2 = 5, --4
ELEVON_A = 6, --2
ELEVON_B = 7 --2
}
local wing_type_text = {[0]="Normal","Dual Ail","Flapperon", "Ail + Flp","Dual Ail + Flp","Dual Ail/Flp","Elevon A","Elevon B"}
local TAIL_TYPE = {
RUD_1 = 0, -- 1
RUD_1_ELEV_1 = 1, -- 2
RUD_1_ELEV_2 = 2, -- 3
RUD_2_ELEV_1 = 3, -- 3
RUD_2_ELEV_2 = 4, -- 4
VTAIL_A = 5, -- 2
VTAIL_B = 6, -- 2
TRAILERON_A = 7, -- 3
TRAILERON_B = 8, -- 3
}
local tail_type_text = {[0]="Rud Only","Normal","Rud + Dual Ele","Dual Rud + Elv","Dual Rud/Ele","VTail A","VTail B","Traileron A","Traileron B"}
local CH_MODE_TYPE = {
NORMAL = 0,
REVERSE = 1,
USE_TX = 3
}
local PORT = {
PORT1 = 0,
PORT2 = 1,
PORT3 = 2,
PORT4 = 3,
PORT5 = 4,
PORT6 = 5,
PORT7 = 6,
PORT8 = 7,
PORT9 = 8,
PORT10 = 9,
}
local MEMU_VAR = {
AIRCRAFT_TYPE = 1001,
WING_TYPE = 1002,
TAIL_TYPE = 1003,
CH_BASE = 1010,
CH_THR = 1010,
CH_L_AIL = 1011,
CH_R_AIL = 1012,
CH_L_FLP = 1013,
CH_R_FLP = 1014,
CH_L_RUD = 1015,
CH_R_RUD = 1016,
CH_L_ELE = 1017,
CH_R_ELE = 1018,
PORT_BASE = 1020,
PORT1_MODE = 1020,
PORT2_MODE = 1021,
PORT3_MODE = 1022,
PORT4_MODE = 1023,
PORT5_MODE = 1024,
PORT6_MODE = 1025,
PORT7_MODE = 1026,
PORT8_MODE = 1027,
PORT9_MODE = 1028,
PORT10_MODE = 1029,
DATA_END = 1040
}
local SetupLib = {}
-- MENU DATA Management
local MENU_DATA = {} -- Store the variables used in the Menus.
local menuDataChanged = false -- Flag to notify if any data has changed
local currAircraftType = -1 -- Current AircraftType selected, and to detect change
local currTailType = -1 -- Current WingType selected, and to detect change
local currWingType = -1 -- Current TailType selected, and to detect change
local lastGoodMenu=0
------------------- Model Setup Helper functions ----------------------
local function printChannelSummary()
-- Summary
print("CHANNEL INFORMATION")
print("Aircraft:".. (aircraft_type_text[currAircraftType] or "--"))
print("Wing Type:".. (wing_type_text[currWingType] or "--"))
print("Tail Type:".. (tail_type_text[currTailType] or "--"))
print("Thr:".. (MODEL.PORT_TEXT[(MENU_DATA[MEMU_VAR.CH_THR] or 30)] or "--")) -- use fake ch30 for non existing channels
print("LAil:".. (MODEL.PORT_TEXT[(MENU_DATA[MEMU_VAR.CH_L_AIL] or 30)] or "--"))
print("RAil:".. (MODEL.PORT_TEXT[(MENU_DATA[MEMU_VAR.CH_R_AIL] or 30)] or "--"))
print("LFlp:".. (MODEL.PORT_TEXT[(MENU_DATA[MEMU_VAR.CH_L_FLP] or 30)] or "--"))
print("RFlp:".. (MODEL.PORT_TEXT[(MENU_DATA[MEMU_VAR.CH_R_FLP] or 30)] or "--"))
print("LEle:".. (MODEL.PORT_TEXT[(MENU_DATA[MEMU_VAR.CH_L_ELE] or 30)] or "--"))
print("REle:".. (MODEL.PORT_TEXT[(MENU_DATA[MEMU_VAR.CH_R_ELE] or 30)] or "--"))
print("LRud:".. (MODEL.PORT_TEXT[(MENU_DATA[MEMU_VAR.CH_L_RUD] or 30)] or "--"))
print("RRud:".. (MODEL.PORT_TEXT[(MENU_DATA[MEMU_VAR.CH_R_RUD] or 30)] or "--"))
end
local function printServoReverseInfo()
print("SERVO Normal/Reverse INFORMATION")
for i=0,10 do
local s="--"
if (MENU_DATA[MEMU_VAR.PORT1_MODE+i] or 0) == 0 then s="NORMAL" else s="REVERSE" end
print(string.format("Port%d: %s", i+1, s))
end
end
local function ST_PlaneWingInit(wingType)
print("Change Plane WingType:"..wing_type_text[wingType])
currWingType = wingType
MENU_DATA[MEMU_VAR.WING_TYPE] = wingType
-- Clear all Wing Data
MENU_DATA[MEMU_VAR.CH_L_AIL] = nil
MENU_DATA[MEMU_VAR.CH_R_AIL] = nil
MENU_DATA[MEMU_VAR.CH_L_FLP] = nil
MENU_DATA[MEMU_VAR.CH_R_FLP] = nil
MENU_DATA[MEMU_VAR.CH_THR] = PORT.PORT1
-- Default Channel Assisgments for each Wing type
if (wingType==WING_TYPE.AIL_1) then
MENU_DATA[MEMU_VAR.CH_L_AIL] = PORT.PORT2
elseif (wingType==WING_TYPE.AIL_2) then
MENU_DATA[MEMU_VAR.CH_L_AIL] = PORT.PORT6
MENU_DATA[MEMU_VAR.CH_R_AIL] = PORT.PORT2
elseif (wingType==WING_TYPE.FLAPERON) then
MENU_DATA[MEMU_VAR.CH_L_AIL] = PORT.PORT6
MENU_DATA[MEMU_VAR.CH_R_AIL] = PORT.PORT2
elseif (wingType==WING_TYPE.AIL_1_FLP_1) then
MENU_DATA[MEMU_VAR.CH_L_AIL] = PORT.PORT2
MENU_DATA[MEMU_VAR.CH_L_FLP] = PORT.PORT6
elseif (wingType==WING_TYPE.AIL_2_FLP_1) then
MENU_DATA[MEMU_VAR.CH_L_AIL] = PORT.PORT6
MENU_DATA[MEMU_VAR.CH_R_AIL] = PORT.PORT2
MENU_DATA[MEMU_VAR.CH_L_FLP] = PORT.PORT5
elseif (wingType==WING_TYPE.AIL_2_FLP_2) then
MENU_DATA[MEMU_VAR.CH_L_AIL] = PORT.PORT6
MENU_DATA[MEMU_VAR.CH_R_AIL] = PORT.PORT2
MENU_DATA[MEMU_VAR.CH_R_FLP] = PORT.PORT5
MENU_DATA[MEMU_VAR.CH_L_FLP] = PORT.PORT7
elseif (wingType==WING_TYPE.ELEVON_A) then
MENU_DATA[MEMU_VAR.CH_L_AIL] = PORT.PORT2
MENU_DATA[MEMU_VAR.CH_R_AIL] = PORT.PORT3
elseif (wingType==WING_TYPE.ELEVON_B) then
MENU_DATA[MEMU_VAR.CH_L_AIL] = PORT.PORT3
MENU_DATA[MEMU_VAR.CH_R_AIL] = PORT.PORT2
else -- Assume normal
print("ERROR: Invalid Wing Type")
end
printChannelSummary()
end
local function ST_PlaneTailInit(tailType)
if (MENU_DATA[MEMU_VAR.WING_TYPE]==WING_TYPE.ELEVON_A) then
tailType = TAIL_TYPE.RUD_1 -- Delta only have ruder
end
print("Change Plane Tail Type:"..tail_type_text[tailType])
currTailType = tailType
-- Clear all data for Tail
MENU_DATA[MEMU_VAR.TAIL_TYPE] = tailType
MENU_DATA[MEMU_VAR.CH_L_ELE] = nil
MENU_DATA[MEMU_VAR.CH_R_ELE] = nil
MENU_DATA[MEMU_VAR.CH_L_RUD] = nil
MENU_DATA[MEMU_VAR.CH_R_RUD] = nil
-- Setup Channels for different Tail types
if (tailType == TAIL_TYPE.RUD_1) then
MENU_DATA[MEMU_VAR.CH_L_RUD] = PORT.PORT4
elseif (tailType == TAIL_TYPE.RUD_1_ELEV_1) then
MENU_DATA[MEMU_VAR.CH_L_ELE] = PORT.PORT3
MENU_DATA[MEMU_VAR.CH_L_RUD] = PORT.PORT4
elseif (tailType == TAIL_TYPE.RUD_1_ELEV_2) then
MENU_DATA[MEMU_VAR.CH_L_ELE] = PORT.PORT5
MENU_DATA[MEMU_VAR.CH_R_ELE] = PORT.PORT3
MENU_DATA[MEMU_VAR.CH_L_RUD] = PORT.PORT4
elseif (tailType == TAIL_TYPE.RUD_2_ELEV_1) then
MENU_DATA[MEMU_VAR.CH_L_ELE] = PORT.PORT3
MENU_DATA[MEMU_VAR.CH_L_RUD] = PORT.PORT5
MENU_DATA[MEMU_VAR.CH_R_RUD] = PORT.PORT4
elseif (tailType == TAIL_TYPE.RUD_2_ELEV_2) then
MENU_DATA[MEMU_VAR.CH_L_ELE] = PORT.PORT5
MENU_DATA[MEMU_VAR.CH_R_ELE] = PORT.PORT3
MENU_DATA[MEMU_VAR.CH_L_RUD] = PORT.PORT6
MENU_DATA[MEMU_VAR.CH_R_RUD] = PORT.PORT4
elseif (tailType == TAIL_TYPE.VTAIL_A) then
MENU_DATA[MEMU_VAR.CH_L_ELE] = PORT.PORT4
MENU_DATA[MEMU_VAR.CH_R_ELE] = PORT.PORT3
elseif (tailType == TAIL_TYPE.VTAIL_B) then
MENU_DATA[MEMU_VAR.CH_L_ELE] = PORT.PORT3
MENU_DATA[MEMU_VAR.CH_R_ELE] = PORT.PORT4
elseif (tailType == TAIL_TYPE.TRAILERON_A) then
MENU_DATA[MEMU_VAR.CH_L_ELE] = PORT.PORT5
MENU_DATA[MEMU_VAR.CH_R_ELE] = PORT.PORT3
elseif (tailType == TAIL_TYPE.TRAILERON_B) then
MENU_DATA[MEMU_VAR.CH_L_ELE] = PORT.PORT5
MENU_DATA[MEMU_VAR.CH_R_ELE] = PORT.PORT3
else -- Assume Normal
print("ERROR:invalid Tail Type")
end
printChannelSummary()
end
local function ST_GliderWingInit(wingType)
print("Change Glider WingType:"..wing_type_text[wingType])
currWingType = wingType
MENU_DATA[MEMU_VAR.WING_TYPE] = wingType
-- Clear all Wing Data
MENU_DATA[MEMU_VAR.CH_L_AIL] = nil
MENU_DATA[MEMU_VAR.CH_R_AIL] = nil
MENU_DATA[MEMU_VAR.CH_L_FLP] = nil
MENU_DATA[MEMU_VAR.CH_R_FLP] = nil
MENU_DATA[MEMU_VAR.CH_THR] = PORT.PORT6
-- Default Channel Assisgments for each Wing type
if (wingType==WING_TYPE.AIL_1) then
MENU_DATA[MEMU_VAR.CH_L_AIL] = PORT.PORT1
elseif (wingType==WING_TYPE.AIL_2) then
MENU_DATA[MEMU_VAR.CH_L_AIL] = PORT.PORT1
MENU_DATA[MEMU_VAR.CH_R_AIL] = PORT.PORT2
elseif (wingType==WING_TYPE.AIL_2_FLP_1) then
MENU_DATA[MEMU_VAR.CH_L_AIL] = PORT.PORT1
MENU_DATA[MEMU_VAR.CH_R_AIL] = PORT.PORT2
MENU_DATA[MEMU_VAR.CH_L_FLP] = PORT.PORT5
elseif (wingType==WING_TYPE.AIL_2_FLP_2) then
MENU_DATA[MEMU_VAR.CH_L_AIL] = PORT.PORT1
MENU_DATA[MEMU_VAR.CH_R_AIL] = PORT.PORT2
MENU_DATA[MEMU_VAR.CH_L_FLP] = PORT.PORT5
MENU_DATA[MEMU_VAR.CH_R_FLP] = PORT.PORT6
MENU_DATA[MEMU_VAR.CH_THR] = PORT.PORT7
elseif (wingType==WING_TYPE.ELEVON_A) then
MENU_DATA[MEMU_VAR.CH_L_AIL] = PORT.PORT1
MENU_DATA[MEMU_VAR.CH_R_AIL] = PORT.PORT2
elseif (wingType==WING_TYPE.ELEVON_B) then
MENU_DATA[MEMU_VAR.CH_L_AIL] = PORT.PORT2
MENU_DATA[MEMU_VAR.CH_R_AIL] = PORT.PORT1
else -- Assume normal
print("ERROR: Invalid Wing Type")
end
printChannelSummary()
end
local function ST_GliderTailInit(tailType)
if (MENU_DATA[MEMU_VAR.WING_TYPE]==WING_TYPE.ELEVON_A) then
tailType = TAIL_TYPE.RUD_1 -- Delta only have ruder
end
print("Change Glider Tail Type:"..tail_type_text[tailType])
currTailType = tailType
-- Clear all data for Tail
MENU_DATA[MEMU_VAR.TAIL_TYPE] = tailType
MENU_DATA[MEMU_VAR.CH_L_ELE] = nil
MENU_DATA[MEMU_VAR.CH_R_ELE] = nil
MENU_DATA[MEMU_VAR.CH_L_RUD] = nil
MENU_DATA[MEMU_VAR.CH_R_RUD] = nil
-- Setup Channels for different Tail types
if (tailType == TAIL_TYPE.RUD_1) then
MENU_DATA[MEMU_VAR.CH_L_RUD] = PORT.PORT4
elseif (tailType == TAIL_TYPE.RUD_1_ELEV_1) then
MENU_DATA[MEMU_VAR.CH_L_ELE] = PORT.PORT3
MENU_DATA[MEMU_VAR.CH_L_RUD] = PORT.PORT4
elseif (tailType == TAIL_TYPE.VTAIL_A) then
MENU_DATA[MEMU_VAR.CH_L_ELE] = PORT.PORT4
MENU_DATA[MEMU_VAR.CH_R_ELE] = PORT.PORT3
elseif (tailType == TAIL_TYPE.VTAIL_B) then
MENU_DATA[MEMU_VAR.CH_L_ELE] = PORT.PORT3
MENU_DATA[MEMU_VAR.CH_R_ELE] = PORT.PORT4
else -- Assume Normal
print("ERROR: Invalid Tail Type")
end
printChannelSummary()
end
local function ST_AircraftInit(aircraftType)
MENU_DATA[MEMU_VAR.AIRCRAFT_TYPE] = aircraftType
currAircraftType = aircraftType
print("Change Aircraft:".. aircraft_type_text[aircraftType])
-- Setup Default Aircraft Wing/Tail
if (aircraftType==AIRCRAFT_TYPE.PLANE) then
ST_PlaneWingInit(WING_TYPE.AIL_1)
ST_PlaneTailInit(TAIL_TYPE.RUD_1_ELEV_1)
elseif (aircraftType==AIRCRAFT_TYPE.GLIDER) then
ST_GliderWingInit(WING_TYPE.AIL_1)
ST_GliderTailInit(TAIL_TYPE.RUD_1_ELEV_1)
else
ST_PlaneWingInit(WING_TYPE.AIL_1)
ST_PlaneTailInit(TAIL_TYPE.RUD_1_ELEV_1)
end
end
-- Setup Initial Default Data for the Menus
local function ST_Default_Data()
print("Initializing Menu DATA")
ST_AircraftInit(AIRCRAFT_TYPE.PLANE)
print("Initializing Servo Reverse from TX output settings")
MENU_DATA[MEMU_VAR.PORT1_MODE] = CH_MODE_TYPE.NORMAL + MODEL.modelOutputChannel[PORT.PORT1].revert
MENU_DATA[MEMU_VAR.PORT2_MODE] = CH_MODE_TYPE.NORMAL + MODEL.modelOutputChannel[PORT.PORT2].revert
MENU_DATA[MEMU_VAR.PORT3_MODE] = CH_MODE_TYPE.NORMAL + MODEL.modelOutputChannel[PORT.PORT3].revert
MENU_DATA[MEMU_VAR.PORT4_MODE] = CH_MODE_TYPE.NORMAL + MODEL.modelOutputChannel[PORT.PORT4].revert
MENU_DATA[MEMU_VAR.PORT5_MODE] = CH_MODE_TYPE.NORMAL + MODEL.modelOutputChannel[PORT.PORT5].revert
MENU_DATA[MEMU_VAR.PORT6_MODE] = CH_MODE_TYPE.NORMAL + MODEL.modelOutputChannel[PORT.PORT6].revert
MENU_DATA[MEMU_VAR.PORT7_MODE] = CH_MODE_TYPE.NORMAL + MODEL.modelOutputChannel[PORT.PORT7].revert
MENU_DATA[MEMU_VAR.PORT8_MODE] = CH_MODE_TYPE.NORMAL + MODEL.modelOutputChannel[PORT.PORT8].revert
MENU_DATA[MEMU_VAR.PORT9_MODE] = CH_MODE_TYPE.NORMAL + MODEL.modelOutputChannel[PORT.PORT9].revert
MENU_DATA[MEMU_VAR.PORT10_MODE] = CH_MODE_TYPE.NORMAL + MODEL.modelOutputChannel[PORT.PORT10].revert
printServoReverseInfo()
end
----------------------- FILE MANAGEMENT ---------------------------------------------
-- Create a fairly unique name for a model..combination of name and a hash
-- TODO: Check with ETX why we can't get the filename used to store the model info
-- Improvement request??
local function hashName(mName)
local c=10000;
local prefix = string.gsub(mName,"%.","_") -- Change any "." to "_"
prefix = string.gsub(prefix,"% ","_") -- Change any space to "_"
prefix = string.sub(prefix,1,5) -- Take the first 5 characters
-- Simple Hash of the Model Name adding each character
for i = 1, #mName do
local ch = string.byte(mName,i,i)
c=c+ch
end
return (prefix .. c) -- Return Prefix + Hash
end
-- Load Menu Data from a file
function ST_LoadFileData()
local fname = hashName(MODEL.modelName)..".txt"
print("Loading File:"..fname)
local dataFile = io.open(DATA_PATH .. "/".. fname, "r") -- read File
-- cannot read file???
if (dataFile==nil) then return 0 end
local line = io.read(dataFile, 5000)
io.close(dataFile)
if #line == 0 then return 0 end -- No data??
-- Process the input, each line is "Var_Id : Value" format
-- Store it into MANU_DATA
local i=0
for k, v in string.gmatch(line, "(%d+):(%d+)") do
--print(string.format("Read MENU_DATA[%d]:[%d]",k, v))
MENU_DATA[k+0]=v+0 -- do aritmentic to convert string to number
i=i+1
end
-- Get the basic info
currAircraftType = MENU_DATA[MEMU_VAR.AIRCRAFT_TYPE]
currWingType = MENU_DATA[MEMU_VAR.WING_TYPE]
currTailType = MENU_DATA[MEMU_VAR.TAIL_TYPE]
print("Validation")
print(string.format("AIRCRAFT_TYPE(%d)=%s", MEMU_VAR.AIRCRAFT_TYPE,aircraft_type_text[currAircraftType]))
print(string.format("WING_TYPE(%d)=%s", MEMU_VAR.WING_TYPE, wing_type_text[currWingType]))
print(string.format("TAIL_TYPE(%d)=%s", MEMU_VAR.TAIL_TYPE, tail_type_text[currTailType]))
printChannelSummary()
printServoReverseInfo()
-- No need to save right now
menuDataChanged = false
-- Return 0 if no lines processed, 1 otherwise
if (i > 0) then return 1 else return 0 end
end
-- Saves MENU_DATA to a file
function ST_SaveFileData()
local fname = hashName(MODEL.modelName)..".txt"
print("Saving File:"..fname)
local dataFile = assert(io.open(DATA_PATH .. "/" .. fname, "w"),"Please create "..DATA_PATH.." folder") -- write File
-- Foreach MENU_DATA with a value write Var_Id:Value into file
for i = 0, MEMU_VAR.DATA_END do
if (MENU_DATA[i]~=nil) then
--print(string.format("Write MENU_DATA[%s] : %s",i,MENU_DATA[i]))
io.write(dataFile,string.format("%s:%s\n",i,MENU_DATA[i]))
end
end
io.close(dataFile)
menuDataChanged = false
end
-- This Creates the Servo Settings that will be used to pass to
-- Forward programming
local function CreateDSMPortChannelInfo()
local function ApplyWingMixA(b2)
-- ELEVON
if (b2==CH_TYPE.AIL+CH_TYPE.ELE) then return 0x20 end; -- 0x03
if (b2==CH_TYPE.AIL+CH_TYPE.ELE+CH_TYPE.REVERSE) then return 0x50 end; -- 0x23
-- Default normal/reverse behaviour
if (b2==CH_TYPE.AIL+CH_TYPE.ELE+CH_TYPE.SLAVE) then return 0x00 end; -- 0x83
if (b2==CH_TYPE.AIL+CH_TYPE.ELE+CH_TYPE.SLAVE+CH_TYPE.REVERSE) then return 0x70 end; -- 0xA3
end
local function ApplyWingMixB(b2)
-- ELEVON
-- Default normal/reverse behaviour
if (b2==CH_TYPE.AIL+CH_TYPE.ELE) then return 0x00 end; -- 0x03
if (b2==CH_TYPE.AIL+CH_TYPE.ELE+CH_TYPE.REVERSE) then return 0x70 end; -- 0x23
-- Difference with B
if (b2==CH_TYPE.AIL+CH_TYPE.ELE+CH_TYPE.SLAVE) then return 0x20 end; -- 0x83
if (b2==CH_TYPE.AIL+CH_TYPE.ELE+CH_TYPE.SLAVE+CH_TYPE.REVERSE) then return 0x50 end; -- 0xA3
end
local function ApplyTailMixA(b2)
-- VTAIL
-- Default normal/reverse behaviour
if (b2==CH_TYPE.RUD+CH_TYPE.ELE) then return 0x00 end; -- 0x06
if (b2==CH_TYPE.RUD+CH_TYPE.ELE+CH_TYPE.REVERSE) then return 0x70 end; -- 0x26
if (b2==CH_TYPE.RUD+CH_TYPE.ELE+CH_TYPE.SLAVE) then return 0x20 end; -- 0x86
if (b2==CH_TYPE.RUD+CH_TYPE.ELE+CH_TYPE.SLAVE+CH_TYPE.REVERSE) then return 0x50 end; -- 0xA6
--TRAILERON
-- Default normal/reverse behaviour
if (b2==CH_TYPE.AIL+CH_TYPE.ELE) then return 0x00 end; -- 0x03
if (b2==CH_TYPE.AIL+CH_TYPE.ELE+CH_TYPE.REVERSE) then return 0x70 end; -- 0x23
if (b2==CH_TYPE.AIL+CH_TYPE.ELE+CH_TYPE.SLAVE) then return 0x10 end; -- 0x83
if (b2==CH_TYPE.AIL+CH_TYPE.ELE+CH_TYPE.SLAVE+CH_TYPE.REVERSE) then return 0x60 end; -- 0xA3
end
local function ApplyTailMixB(b2)
-- VTAIL
-- Default normal/reverse behaviour
if (b2==CH_TYPE.RUD+CH_TYPE.ELE) then return 0x00 end; -- 0x06
if (b2==CH_TYPE.RUD+CH_TYPE.ELE+CH_TYPE.REVERSE) then return 0x70 end; -- 0x26
if (b2==CH_TYPE.RUD+CH_TYPE.ELE+CH_TYPE.SLAVE) then return 0x40 end; -- 0x86
if (b2==CH_TYPE.RUD+CH_TYPE.ELE+CH_TYPE.SLAVE+CH_TYPE.REVERSE) then return 0x30 end; -- 0xA6
--TAILERON
if (b2==CH_TYPE.AIL+CH_TYPE.ELE) then return 0x10 end; -- 0x03
if (b2==CH_TYPE.AIL+CH_TYPE.ELE+CH_TYPE.REVERSE) then return 0x60 end; -- 0x23
-- Default normal/reverse behaviour
if (b2==CH_TYPE.AIL+CH_TYPE.ELE+CH_TYPE.SLAVE) then return 0x00 end; -- 0x83
if (b2==CH_TYPE.AIL+CH_TYPE.ELE+CH_TYPE.SLAVE+CH_TYPE.REVERSE) then return 0x70 end; -- 0xA3
end
local DSM_ChannelInfo = {}
for i=0, 9 do
DSM_ChannelInfo[i] = {[0]= 0x00, CH_TYPE.NONE} -- Initialize with no special function
end
local wingType = MENU_DATA[MEMU_VAR.WING_TYPE]
local tailType = MENU_DATA[MEMU_VAR.TAIL_TYPE]
local thrCh = MENU_DATA[MEMU_VAR.CH_THR]
local lAilCh = MENU_DATA[MEMU_VAR.CH_L_AIL]
local rAilCh = MENU_DATA[MEMU_VAR.CH_R_AIL]
local lflapCh = MENU_DATA[MEMU_VAR.CH_L_FLP]
local rflapCh = MENU_DATA[MEMU_VAR.CH_R_FLP]
local lElevCh = MENU_DATA[MEMU_VAR.CH_L_ELE]
local rElevCh = MENU_DATA[MEMU_VAR.CH_R_ELE]
local lRudCh = MENU_DATA[MEMU_VAR.CH_L_RUD]
local rRudCh = MENU_DATA[MEMU_VAR.CH_R_RUD]
-- Channels in menu vars are Zero base, Channel info is 1 based
-- THR
if (thrCh~=nil) then DSM_ChannelInfo[thrCh][1]= CH_TYPE.THR end
-- AIL (Left and Right)
if (lAilCh~=nil) then DSM_ChannelInfo[lAilCh][1] = CH_TYPE.AIL end
if (rAilCh~=nil) then DSM_ChannelInfo[rAilCh][1] = CH_TYPE.AIL+CH_TYPE.SLAVE end
-- ELE (Left and Right)
if (lElevCh~=nil) then DSM_ChannelInfo[lElevCh][1] = CH_TYPE.ELE end
if (rElevCh~=nil) then DSM_ChannelInfo[rElevCh][1] = CH_TYPE.ELE+CH_TYPE.SLAVE end
-- RUD (Left and Right)
if (lRudCh~=nil) then DSM_ChannelInfo[lRudCh][1] = CH_TYPE.RUD end
if (rRudCh~=nil) then DSM_ChannelInfo[rRudCh][1] = CH_TYPE.RUD+CH_TYPE.SLAVE end
-- VTAIL: RUD + ELE
if (tailType==TAIL_TYPE.VTAIL_A) then
DSM_ChannelInfo[lElevCh][1] = CH_TYPE.RUD+CH_TYPE.ELE
DSM_ChannelInfo[rElevCh][1] = CH_TYPE.RUD+CH_TYPE.ELE+CH_TYPE.SLAVE
elseif (tailType==TAIL_TYPE.VTAIL_B) then
DSM_ChannelInfo[lElevCh][1] = CH_TYPE.RUD+CH_TYPE.ELE+CH_TYPE.SLAVE
DSM_ChannelInfo[rElevCh][1] = CH_TYPE.RUD+CH_TYPE.ELE
end
-- TRAILERRON: 2-ELE + AIL
if (tailType==TAIL_TYPE.TRAILERON_A) then
DSM_ChannelInfo[lElevCh][1] = CH_TYPE.AIL+CH_TYPE.ELE
DSM_ChannelInfo[rElevCh][1] = CH_TYPE.AIL+CH_TYPE.ELE+CH_TYPE.SLAVE
elseif (tailType==TAIL_TYPE.TRAILERON_B) then
DSM_ChannelInfo[lElevCh][1] = CH_TYPE.AIL+CH_TYPE.ELE+CH_TYPE.SLAVE
DSM_ChannelInfo[rElevCh][1] = CH_TYPE.AIL+CH_TYPE.ELE
end
---- ELEVON : AIL + ELE
if (wingType==WING_TYPE.ELEVON_A) then
DSM_ChannelInfo[lAilCh][1] = CH_TYPE.AIL+CH_TYPE.ELE
DSM_ChannelInfo[rAilCh][1] = CH_TYPE.AIL+CH_TYPE.ELE+CH_TYPE.SLAVE
elseif (wingType==WING_TYPE.ELEVON_B) then
DSM_ChannelInfo[lAilCh][1] = CH_TYPE.AIL+CH_TYPE.ELE
DSM_ChannelInfo[rAilCh][1] = CH_TYPE.AIL+CH_TYPE.ELE+CH_TYPE.SLAVE
end
-- Apply Gyro Reverse as needed for each channel as long as it is used
for i=0, 9 do
if (MENU_DATA[MEMU_VAR.PORT_BASE+i]==CH_MODE_TYPE.REVERSE and DSM_ChannelInfo[i][1]>0) then
DSM_ChannelInfo[i][0]=DSM_ChannelInfo[i][1]+0x70 -- ALL REVERSE is 0x70 for normal
DSM_ChannelInfo[i][1]=DSM_ChannelInfo[i][1]+CH_TYPE.REVERSE
end
end
-- VTAIL: RUD + ELE
if (tailType==TAIL_TYPE.VTAIL_A) then
DSM_ChannelInfo[lElevCh][0] = ApplyTailMixA(DSM_ChannelInfo[lElevCh][1])
DSM_ChannelInfo[rElevCh][0] = ApplyTailMixA(DSM_ChannelInfo[rElevCh][1])
elseif (tailType==TAIL_TYPE.VTAIL_B) then
DSM_ChannelInfo[lElevCh][0] = ApplyTailMixB(DSM_ChannelInfo[lElevCh][1])
DSM_ChannelInfo[rElevCh][0] = ApplyTailMixB(DSM_ChannelInfo[rElevCh][1])
end
-- TRAILERRON: ELE + AIL
if (tailType==TAIL_TYPE.TRAILERON_A) then
DSM_ChannelInfo[lElevCh][1] = ApplyTailMixA(DSM_ChannelInfo[lElevCh][1])
DSM_ChannelInfo[rElevCh][1] = ApplyTailMixA(DSM_ChannelInfo[rElevCh][1])
elseif (tailType==TAIL_TYPE.TRAILERON_B) then
DSM_ChannelInfo[lElevCh][1] = ApplyTailMixB(DSM_ChannelInfo[lElevCh][1])
DSM_ChannelInfo[rElevCh][1] = ApplyTailMixB(DSM_ChannelInfo[rElevCh][1])
end
---- ELEVON : AIL + ELE
if (wingType==WING_TYPE.ELEVON_A) then
DSM_ChannelInfo[lAilCh][0] = ApplyWingMixA(DSM_ChannelInfo[lAilCh][1])
DSM_ChannelInfo[rAilCh][0] = ApplyWingMixA(DSM_ChannelInfo[rAilCh][1])
elseif (wingType==WING_TYPE.ELEVON_B) then
DSM_ChannelInfo[lAilCh][0] = ApplyWingMixB(DSM_ChannelInfo[lAilCh][1])
DSM_ChannelInfo[rAilCh][0] = ApplyWingMixB(DSM_ChannelInfo[rAilCh][1])
end
-- Show how it looks
for i=0, 9 do
local b1,b2 = DSM_ChannelInfo[i][0], DSM_ChannelInfo[i][1]
print(string.format("%s (%02X %02X) %s", MODEL.PORT_TEXT[i],
b1, b2, dsmLib.channelType2String(b1,b2)))
end
return DSM_ChannelInfo, string.format("Aircraft(%s) Wing(%s) Tail(%s)",aircraft_type_text[currAircraftType],wing_type_text[wingType],tail_type_text[tailType])
end
---- Memu Processing Helpers to Mimic the DSM RX menu behaviour
local function ST_StartConnection()
return 0
end
local function ST_ReleaseConnection()
end
-- Clear each line of the menu
local function clearMenuLines()
local ctx = dsmLib.DSM_Context
for i = 0, dsmLib.MAX_MENU_LINES do -- clear menu
ctx.MenuLines[i] = { MenuId = 0, lineNum = 0, Type = 0, Text = "", TextId = 0, ValId = 0, Min=0, Max=0, Def=0, TextStart=0, Val=nil }
end
end
-- Post processing needed for each menu
local function PostProcessMenu()
local ctx = dsmLib.DSM_Context
if (ctx.Menu.Text==nil) then
ctx.Menu.Text = dsmLib.Get_Text(ctx.Menu.TextId)
dsmLib.MenuPostProcessing (ctx.Menu)
end
if (DEBUG_ON) then dsmLib.LOG_write("SIM RESPONSE Menu: %s\n", dsmLib.menu2String(ctx.Menu)) end
for i = 0, dsmLib.MAX_MENU_LINES do -- clear menu
local line = ctx.MenuLines[i]
if (line.Type~=0) then
line.MenuId = ctx.Menu.MenuId
line.lineNum = i
dsmLib.MenuLinePostProcessing(line) -- Do the same post processing as if they come from the RX
if (DEBUG_ON) then dsmLib.LOG_write("SIM RESPONSE MenuLine: %s\n", dsmLib.menuLine2String(line)) end
end
end
end
-- Creates the menus to Render with the GUI
local function ST_LoadMenu(menuId)
local ctx = dsmLib.DSM_Context
local function formatTXRevert(port)
return ((MODEL.modelOutputChannel[port].revert==0 and " (Tx:Normal)") or " (Tx:Reverse)")
end
clearMenuLines()
if (menuId==0x1000) then -- MAIN MENU
ctx.Menu = { MenuId = 0x1000, Text = "Main Menu ("..MODEL.modelName..")", PrevId = 0, NextId = 0, BackId = 0, TextId=0 }
ctx.MenuLines[0] = { Type = LINE_TYPE.MENU, Text = "Model Setup", ValId = 0x1001,TextId=0 }
if (menuDataChanged) then
ctx.MenuLines[4] = { Type = LINE_TYPE.MENU, Text="Save Changes", TextId = 0, ValId = 0x1005 }
ctx.MenuLines[5] = { Type = LINE_TYPE.MENU, Text="Discard Changes", TextId = 0, ValId = 0x1006 }
ctx.SelLine = 4
else
if (SIMULATION_ON) then
ctx.MenuLines[4] = { Type = LINE_TYPE.MENU, Text = "RX Simulator (GUI dev only)", ValId = 0xFFF1, TextId=0 } -- Menu 0xFFF2 to SIMULATOR
end
ctx.MenuLines[6] = { Type = LINE_TYPE.MENU, Text = "Forward Programming RX", ValId = 0xFFF2, TextId=0 } -- Menu 0xFFF2 to Real RX
ctx.SelLine = 6
end
lastGoodMenu = menuId
elseif (menuId==0x1001) then -- MODEL SETUP
ctx.Menu = { MenuId = 0x1001, Text = "Model Setup ("..MODEL.modelName..")", PrevId = 0, NextId = 0, BackId = 0x1000, TextId=0 }
ctx.MenuLines[0] = { Type = LINE_TYPE.MENU, Text = "Aircraft Type Setup", ValId = 0x1010,TextId=0 }
ctx.MenuLines[1] = { Type = LINE_TYPE.MENU, Text = "Wing & Tail Channels ", ValId = 0x1020, TextId=0 }
ctx.MenuLines[3] = { Type = LINE_TYPE.MENU, Text = "Gyro Channel Reverse", ValId = 0x1030, TextId=0 }
ctx.MenuLines[5] = { Type = LINE_TYPE.MENU, Text = "WARNING: Changing of Aircraft or Wing will", ValId = 0x1001, TextId=0 }
ctx.MenuLines[6] = { Type = LINE_TYPE.MENU, Text = "delete previous Channel/Port assigments.", ValId = 0x1001, TextId=0 }
ctx.SelLine = 0
lastGoodMenu = menuId
elseif (menuId==0x1005) then
printChannelSummary()
ST_SaveFileData()
local msg1 = "Data saved to: "
local msg2 = " "..DATA_PATH.."/"..hashName(MODEL.modelName)..".txt"
ctx.Menu = { MenuId = 0x1005, Text = "Config Saved", PrevId = 0, NextId = 0, BackId = 0, TextId=0 }
ctx.MenuLines[2] = { Type = LINE_TYPE.MENU, Text=msg1, TextId = 0, ValId = 0x1005 }
ctx.MenuLines[3] = { Type = LINE_TYPE.MENU, Text=msg2, TextId = 0, ValId = 0x1005 }
ctx.MenuLines[6] = { Type = LINE_TYPE.MENU, Text="Complete", TextId = 0, ValId = 0x1000 }
ctx.SelLine = 6
lastGoodMenu = menuId
elseif (menuId==0x1006) then
ST_LoadFileData()
local msg1 = "Data restored from: "
local msg2 = " "..DATA_PATH.."/"..hashName(MODEL.modelName)..".txt"
ctx.Menu = { MenuId = 0x1006, Text = "Discart Changes", PrevId = 0, NextId = 0, BackId = 0, TextId=0 }
ctx.MenuLines[2] = { Type = LINE_TYPE.MENU, Text=msg1, TextId = 0, ValId = 0x1006 }
ctx.MenuLines[3] = { Type = LINE_TYPE.MENU, Text=msg2, TextId = 0, ValId = 0x1006 }
ctx.MenuLines[6] = { Type = LINE_TYPE.MENU, Text="Complete", TextId = 0, ValId = 0x1000 }
ctx.SelLine = 6
lastGoodMenu = menuId
elseif (menuId==0x1010) then
ctx.Menu = { MenuId = 0x1010, Text = "Aircraft Type", PrevId = 0x1001, NextId = 0x1011, BackId = 0, TextId=0 }
ctx.MenuLines[5] = { Type = LINE_TYPE.LIST_MENU_NC, Text="Aircraft Type", TextId = 0, ValId = MEMU_VAR.AIRCRAFT_TYPE, Min=50, Max=53, Def=50, Val=MENU_DATA[MEMU_VAR.AIRCRAFT_TYPE] }
ctx.SelLine = 5
lastGoodMenu = menuId
elseif (menuId==0x1011) then
ctx.Menu = { MenuId = 0x1011, Text = "Model Type:"..aircraft_type_text[currAircraftType], PrevId = 0x1010, NextId = 0x1020, BackId = 0, TextId=0 }
ctx.MenuLines[5] = { Type = LINE_TYPE.LIST_MENU_NC, Text="Wing Type", TextId = 0, ValId = MEMU_VAR.WING_TYPE, Min=100, Max=107, Def=100, Val=MENU_DATA[MEMU_VAR.WING_TYPE] }
ctx.MenuLines[6] = { Type = LINE_TYPE.LIST_MENU_NC, Text="Tail Type", TextId = 0, ValId = MEMU_VAR.TAIL_TYPE, Min=200, Max=208, Def=200, Val=MENU_DATA[MEMU_VAR.TAIL_TYPE] }
ctx.SelLine = 5
lastGoodMenu = menuId
elseif (menuId==0x1020) then
------ WING SETUP -------
local thr = MENU_DATA[MEMU_VAR.CH_THR]
local leftAil = MENU_DATA[MEMU_VAR.CH_L_AIL]
local rightAil = MENU_DATA[MEMU_VAR.CH_R_AIL]
local leftFlap = MENU_DATA[MEMU_VAR.CH_L_FLP]
local rightFlap = MENU_DATA[MEMU_VAR.CH_R_FLP]
local thrText = "Thr"
local leftAilText = "Left Aileron"
local rightAilText = "Right Aileron"
local leftFlapText = "Left Flap"
local rightFlapText = "Right Flap"
if (rightAil==nil) then leftAilText = "Aileron" end
if (rightFlap==nil) then leftFlapText = "Flap" end
local title = aircraft_type_text[currAircraftType].." Wing:"..wing_type_text[currWingType]
ctx.Menu = { MenuId = 0x1020, Text = title, PrevId = 0x1011, NextId = 0x1021, BackId = 0, TextId=0 }
ctx.MenuLines[0] = { Type = LINE_TYPE.LIST_MENU_NC, Text=thrText, TextId = 0, ValId = MEMU_VAR.CH_THR, Min=0, Max=9, Def=0, Val= thr }
ctx.MenuLines[2] = { Type = LINE_TYPE.LIST_MENU_NC, Text=leftAilText, TextId = 0, ValId = MEMU_VAR.CH_L_AIL, Min=0, Max=9, Def=0, Val= leftAil }
if (rightAil~=nil) then
ctx.MenuLines[3] = { Type = LINE_TYPE.LIST_MENU_NC, Text=rightAilText, TextId = 0, ValId = MEMU_VAR.CH_R_AIL, Min=0, Max=9, Def=0, Val= rightAil }
end
if (leftFlap~=nil) then
ctx.MenuLines[4] = { Type = LINE_TYPE.LIST_MENU_NC, Text=leftFlapText, TextId = 0, ValId = MEMU_VAR.CH_L_FLP, Min=0, Max=9, Def=0, Val= leftFlap }
end
if (rightFlap~=nil) then
ctx.MenuLines[5] = { Type = LINE_TYPE.LIST_MENU_NC, Text=rightFlapText, TextId = 0, ValId = MEMU_VAR.CH_R_FLP, Min=0, Max=9, Def=0, Val= rightFlap }
end
ctx.SelLine = 1
lastGoodMenu = menuId
elseif (menuId==0x1021) then
------ TAIL SETUP -------
local leftRud = MENU_DATA[MEMU_VAR.CH_L_RUD]
local rightRud = MENU_DATA[MEMU_VAR.CH_R_RUD]
local leftEle = MENU_DATA[MEMU_VAR.CH_L_ELE]
local rightEle = MENU_DATA[MEMU_VAR.CH_R_ELE]
local leftRudText = "Left Rudder"
local rightRudText = "Right Rudder"
local leftElvText = "Left Elevator"
local rightElvText = "Right Elevator"
if (rightRud==nil) then leftRudText = "Rudder" end
if (rightEle==nil) then leftElvText = "Elevator" end
local title = aircraft_type_text[currAircraftType].." Tail:"..tail_type_text[currTailType]
ctx.Menu = { MenuId = 0x1021, Text = title, PrevId = 0x1020, NextId = 0x1001, BackId = 0, TextId=0 }
if (leftRud~=nil) then
ctx.MenuLines[1] = { Type = LINE_TYPE.LIST_MENU_NC, Text=leftRudText, TextId = 0, ValId = MEMU_VAR.CH_L_RUD, Min=0, Max=9, Def=0, Val= leftRud}
end
if (rightRud~=nil) then
ctx.MenuLines[2] = { Type = LINE_TYPE.LIST_MENU_NC, Text=rightRudText, TextId = 0, ValId = MEMU_VAR.CH_R_RUD, Min=0, Max=9, Def=0, Val=rightRud }
end
if (leftEle~=nil) then
ctx.MenuLines[4] = { Type = LINE_TYPE.LIST_MENU_NC, Text=leftElvText, TextId = 0, ValId = MEMU_VAR.CH_L_ELE, Min=0, Max=9, Def=0, Val=leftEle }
end
if (rightEle~=nil) then
ctx.MenuLines[5] = { Type = LINE_TYPE.LIST_MENU_NC, Text=rightElvText, TextId = 0, ValId = MEMU_VAR.CH_R_ELE, Min=0, Max=9, Def=0, Val=rightEle }
end
ctx.SelLine = 1
lastGoodMenu = menuId
elseif (menuId==0x1030) then
printChannelSummary()
ctx.Menu = { MenuId = 0x1030, Text = "Gyro Channel Reverse (Port 1-5)", PrevId = 0, NextId = 0x1031, BackId = 0x1001, TextId=0 }
ctx.MenuLines[0] = { Type = LINE_TYPE.LIST_MENU_NC, Text=MODEL.PORT_TEXT[PORT.PORT1], TextId = 0, ValId = MEMU_VAR.PORT1_MODE, Min=300, Max=301, Def=300, Val=MENU_DATA[MEMU_VAR.PORT1_MODE], Format = formatTXRevert(PORT.PORT1) }
ctx.MenuLines[1] = { Type = LINE_TYPE.LIST_MENU_NC, Text=MODEL.PORT_TEXT[PORT.PORT2], TextId = 0, ValId = MEMU_VAR.PORT2_MODE, Min=300, Max=301, Def=300, Val=MENU_DATA[MEMU_VAR.PORT2_MODE], Format = formatTXRevert(PORT.PORT2) }
ctx.MenuLines[2] = { Type = LINE_TYPE.LIST_MENU_NC, Text=MODEL.PORT_TEXT[PORT.PORT3], TextId = 0, ValId = MEMU_VAR.PORT3_MODE, Min=300, Max=301, Def=300, Val=MENU_DATA[MEMU_VAR.PORT3_MODE], Format = formatTXRevert(PORT.PORT3) }
ctx.MenuLines[3] = { Type = LINE_TYPE.LIST_MENU_NC, Text=MODEL.PORT_TEXT[PORT.PORT4], TextId = 0, ValId = MEMU_VAR.PORT4_MODE, Min=300, Max=301, Def=300, Val=MENU_DATA[MEMU_VAR.PORT4_MODE], Format = formatTXRevert(PORT.PORT4) }
ctx.MenuLines[4] = { Type = LINE_TYPE.LIST_MENU_NC, Text=MODEL.PORT_TEXT[PORT.PORT5], TextId = 0, ValId = MEMU_VAR.PORT5_MODE, Min=300, Max=301, Def=300, Val=MENU_DATA[MEMU_VAR.PORT5_MODE], Format = formatTXRevert(PORT.PORT5) }
ctx.MenuLines[5] = { Type = LINE_TYPE.MENU, Text="Only Thr/Ail/Rud/Ele. This affects AS3X/SAFE reaction dir./b", TextId = 0, ValId = 0x1030 }
ctx.MenuLines[6] = { Type = LINE_TYPE.MENU, Text="Any changes, use RX 'Relearn Servo Settings'/b", TextId = 0, ValId = 0x1030 }
ctx.SelLine = 0
lastGoodMenu = menuId
elseif (menuId==0x1031) then
printChannelSummary()
ctx.Menu = { MenuId = 0x1031, Text = "Gyro Channel Reverse (Port 6-10)", PrevId = 0x1030, NextId = 0, BackId = 0x1001, TextId=0 }
ctx.MenuLines[0] = { Type = LINE_TYPE.LIST_MENU_NC, Text=MODEL.PORT_TEXT[PORT.PORT6], TextId = 0, ValId = MEMU_VAR.PORT6_MODE, Min=300, Max=301, Def=300, Val=MENU_DATA[MEMU_VAR.PORT6_MODE], Format = formatTXRevert(PORT.PORT6) }
ctx.MenuLines[1] = { Type = LINE_TYPE.LIST_MENU_NC, Text=MODEL.PORT_TEXT[PORT.PORT7], TextId = 0, ValId = MEMU_VAR.PORT7_MODE, Min=300, Max=301, Def=300, Val=MENU_DATA[MEMU_VAR.PORT7_MODE], Format = formatTXRevert(PORT.PORT7) }
ctx.MenuLines[2] = { Type = LINE_TYPE.LIST_MENU_NC, Text=MODEL.PORT_TEXT[PORT.PORT8], TextId = 0, ValId = MEMU_VAR.PORT8_MODE, Min=300, Max=301, Def=300, Val=MENU_DATA[MEMU_VAR.PORT8_MODE], Format = formatTXRevert(PORT.PORT8) }
ctx.MenuLines[3] = { Type = LINE_TYPE.LIST_MENU_NC, Text=MODEL.PORT_TEXT[PORT.PORT9], TextId = 0, ValId = MEMU_VAR.PORT9_MODE, Min=300, Max=301, Def=300, Val=MENU_DATA[MEMU_VAR.PORT9_MODE], Format = formatTXRevert(PORT.PORT9) }
ctx.MenuLines[4] = { Type = LINE_TYPE.LIST_MENU_NC, Text=MODEL.PORT_TEXT[PORT.PORT10], TextId = 0, ValId = MEMU_VAR.PORT10_MODE, Min=300, Max=301, Def=300, Val=MENU_DATA[MEMU_VAR.PORT10_MODE], Format = formatTXRevert(PORT.PORT10) }
ctx.MenuLines[5] = { Type = LINE_TYPE.MENU, Text="Only Thr/Ail/Rud/Ele. This affects AS3X/SAFE reaction dir./b", TextId = 0, ValId = 0x1031 }
ctx.MenuLines[6] = { Type = LINE_TYPE.MENU, Text="Any changes, use RX 'Relearn Servo Settings'/b", TextId = 0, ValId = 0x1031 }
ctx.SelLine = 0
lastGoodMenu = menuId
else
print("NOT IMPLEMENTED")
ctx.Menu = { MenuId = 0x0002, Text = "NOT IMPLEMENTED", TextId = 0, PrevId = 0, NextId = 0, BackId = lastGoodMenu }
ctx.SelLine = dsmLib.BACK_BUTTON
end
PostProcessMenu()
end
-- ST_SendReceive
-- Main state machine for the Setup menu
local function ST_SendReceive()
local ctx = dsmLib.DSM_Context
--if (DEBUG_ON) then dsmLib.LOG_write("%3.3f %s: ", dsmLib.getElapsedTime(), dsmLib.phase2String(ctx.Phase)) end
if ctx.Phase == PHASE.RX_VERSION then -- request RX version
ctx.RX.Name = "MODEL SETUP"
ctx.RX.Version = SETUP_LIB_VERSION
ctx.Phase = PHASE.MENU_TITLE
ctx.Refresh_Display = true
elseif ctx.Phase == PHASE.WAIT_CMD then
elseif ctx.Phase == PHASE.MENU_TITLE then -- request menu title
if ctx.Menu.MenuId == 0 then -- First time loading a menu ?
ST_LoadMenu(0x01000)
else
ST_LoadMenu(ctx.Menu.MenuId)
end
ctx.Phase = PHASE.WAIT_CMD
ctx.Refresh_Display = true
elseif ctx.Phase == PHASE.VALUE_CHANGING then -- send value
local line = ctx.MenuLines[ctx.SelLine] -- Updated Value of SELECTED line
if (MENU_DATA[line.ValId] ~= line.Val ) then
MENU_DATA[line.ValId] = line.Val
print(string.format("MENU_DATA[%d/%s]=%d",line.ValId,line.Text, line.Val))
menuDataChanged=true
end
ctx.Phase = PHASE.VALUE_CHANGING_WAIT
elseif ctx.Phase == PHASE.VALUE_CHANGING_WAIT then
local line = ctx.MenuLines[ctx.SelLine]
elseif ctx.Phase == PHASE.VALUE_CHANGE_END then -- send value
local line = ctx.MenuLines[ctx.SelLine] -- Updated Value of SELECTED line
-- Update the menu data from the line
if (MENU_DATA[line.ValId] ~= line.Val ) then
MENU_DATA[line.ValId] = line.Val
print(string.format("MENU_DATA[%d/%s]=%d",line.ValId,line.Text, line.Val))
menuDataChanged=true
end
-- Did the aircraft type change?
if (currAircraftType ~= MENU_DATA[MEMU_VAR.AIRCRAFT_TYPE]) then
ST_AircraftInit(MENU_DATA[MEMU_VAR.AIRCRAFT_TYPE])
end
-- Did the Wing type change?
if (currWingType ~= MENU_DATA[MEMU_VAR.WING_TYPE]) then
if (currAircraftType==AIRCRAFT_TYPE.GLIDER) then
ST_GliderWingInit(MENU_DATA[MEMU_VAR.WING_TYPE])
else
ST_PlaneWingInit(MENU_DATA[MEMU_VAR.WING_TYPE])
end
-- DELTA has only RUDER
if ((currWingType==WING_TYPE.ELEVON_A or currWingType==WING_TYPE.ELEVON_B) and TAIL_TYPE~=TAIL_TYPE.RUD_1) then
currTailType = TAIL_TYPE.RUD_1
end
end
--- Did the tail changed?
if (currTailType ~= MENU_DATA[MEMU_VAR.TAIL_TYPE]) then
if (currAircraftType==AIRCRAFT_TYPE.GLIDER) then
ST_GliderTailInit(MENU_DATA[MEMU_VAR.TAIL_TYPE])
else
ST_PlaneTailInit(MENU_DATA[MEMU_VAR.TAIL_TYPE])
end
end
ctx.Phase = PHASE.WAIT_CMD
elseif ctx.Phase == PHASE.EXIT then
ctx.Phase=PHASE.EXIT_DONE
end
end
------------------------------------------------------------------------------------------------------------
-- TEXT Management
local List_Text = {}
local Text = {}
local List_Text_Img = {}
local List_Values = {}
-- Get the text for this menus
local function ST_Get_Text(index)
local out = Text[index] -- Find in regular header first
if out== nil then
out = List_Text[index] -- Try list values, don't think is necesary, but just playing Safe
end
if out == nil then -- unknown...
out = "Unknown_" .. string.format("%X", index)
end
return out
end
-- Get the List text for this menus
local function ST_Get_List_Text(index)
local out = List_Text[index] -- Try to find the message in List_Text
if out == nil then
out = Text[index] -- Try list headers, don't think is necesary, but just playing Safe
end
if out == nil then -- unknown...
out = "UnknownLT_" .. string.format("%X", index)
end
return out
end
-- Get the List_Text Images
local function ST_Get_List_Text_Img(index)
local out = List_Text_Img[index]
return out
end
local function ST_Get_List_Values(index)
local out = List_Values[index]
return out
end
-- Inital List and Image Text for this menus
local function ST_Init_Text(rxId)
dsmLib.Init_Text(rxId)
-- Channel Names use the Port Text Retrived from OTX/ETX
for i = 0, 9 do List_Text[i] = MODEL.PORT_TEXT[i] end
-- Aircraft Type
List_Text[50+AIRCRAFT_TYPE.PLANE] = "Airplane"; --List_Text_Img[50+AIRCRAFT_TYPE.PLANE] = "at_plane.png|Airplane"
List_Text[50+AIRCRAFT_TYPE.GLIDER] = "Glider (Partial work)"; --List_Text_Img[50+AIRCRAFT_TYPE.GLIDER] = "at_glider.png|Glider"
List_Text[50+AIRCRAFT_TYPE.HELI] = "Helicopter (Not done)"; --List_Text_Img[50+AIRCRAFT_TYPE.HELI] = "at_heli.png|Helicopter"
List_Text[50+AIRCRAFT_TYPE.DRONE] = "Drone (not done)"; --List_Text_Img[50+AIRCRAFT_TYPE.DRONE] = "at_drone.png|Drone"
-- Wing Types
List_Text[100+WING_TYPE.AIL_1] = "Single Ail"; List_Text_Img[100+WING_TYPE.AIL_1] = "wt_1ail.png|Single Aileron"
List_Text[100+WING_TYPE.AIL_2] = "Dual Ail"; List_Text_Img[100+WING_TYPE.AIL_2] = "wt_2ail.png|Dual Aileron"
List_Text[100+WING_TYPE.FLAPERON] = "Flaperon"; List_Text_Img[100+WING_TYPE.FLAPERON] = "wt_flaperon.png|Flaperon"
List_Text[100+WING_TYPE.AIL_1_FLP_1] = "Ail + Flap"; List_Text_Img[100+WING_TYPE.AIL_1_FLP_1] = "wt_1ail_1flp.png|Aileron + Flap"
List_Text[100+WING_TYPE.AIL_2_FLP_1] = "Dual Ail + Flap"; List_Text_Img[100+WING_TYPE.AIL_2_FLP_1] = "wt_2ail_1flp.png|Dual Aileron + Flap"
List_Text[100+WING_TYPE.AIL_2_FLP_2] = "Dual Ail + Dual Flap"; List_Text_Img[100+WING_TYPE.AIL_2_FLP_2] = "wt_2ail_2flp.png|Dual Aileron + Dual Flap"
List_Text[100+WING_TYPE.ELEVON_A] = "Delta/Elevon A"; List_Text_Img[100+WING_TYPE.ELEVON_A] = "wt_elevon.png|Delta/Elevon A"
List_Text[100+WING_TYPE.ELEVON_B] = "Delta/Elevon B"; List_Text_Img[100+WING_TYPE.ELEVON_B] = "wt_elevon.png|Delta/Elevon B"
-- Tail Types
List_Text[200+TAIL_TYPE.RUD_1] = "Rudder Only"; List_Text_Img[200+TAIL_TYPE.RUD_1] = "tt_1rud.png|Rudder Only"
List_Text[200+TAIL_TYPE.RUD_1_ELEV_1] = "Rud + Ele"; List_Text_Img[200+TAIL_TYPE.RUD_1_ELEV_1] = "tt_1rud_1ele.png|Tail Normal"
List_Text[200+TAIL_TYPE.RUD_1_ELEV_2] = "Rud + Dual Ele"; List_Text_Img[200+TAIL_TYPE.RUD_1_ELEV_2] = "tt_1rud_2ele.png|Rud + Dual Elev"
List_Text[200+TAIL_TYPE.RUD_2_ELEV_1] = "Dual Rud + Ele"; List_Text_Img[200+TAIL_TYPE.RUD_2_ELEV_1] = "tt_2rud_1ele.png|Dual Rud + Elev"
List_Text[200+TAIL_TYPE.RUD_2_ELEV_2] = "Dual Rud + Dual Ele"; List_Text_Img[200+TAIL_TYPE.RUD_2_ELEV_2] = "tt_2rud_2ele.png|Dual Rud + Dual Elev"
List_Text[200+TAIL_TYPE.VTAIL_A] = "V-Tail A"; List_Text_Img[200+TAIL_TYPE.VTAIL_A] = "tt_vtail.png|V-Tail A"
List_Text[200+TAIL_TYPE.VTAIL_B] = "V-Tail B"; List_Text_Img[200+TAIL_TYPE.VTAIL_B] = "tt_vtail.png|V-Tail B"
List_Text[200+TAIL_TYPE.TRAILERON_A] = "Traileron A"; List_Text_Img[200+TAIL_TYPE.TRAILERON_A] = "tt_traileron.png|Traileron A"
List_Text[200+TAIL_TYPE.TRAILERON_B] = "Traileron B"; List_Text_Img[200+TAIL_TYPE.TRAILERON_B] = "tt_traileron.png|Traileron B"
-- Servo Reverse
List_Text[300+CH_MODE_TYPE.NORMAL] = "Normal "
List_Text[300+CH_MODE_TYPE.REVERSE] = "Reverse"
end
-- Initial Setup
local function ST_Init()
-- Initialize dsmLib background
dsmLib.Init()
-- Initialize text (use RX_ID 0)
ST_Init_Text(0)
-- Setup default Data, and load a file if exist
ST_Default_Data()
if (ST_LoadFileData()==0) then -- Did not load a file
ST_SaveFileData() -- Save Defaults
end
end
------------------------------------------------------------------------------------------------------------
-- Lib EXPORTS
-- Export Constants
SetupLib.PHASE = dsmLib.PHASE
SetupLib.LINE_TYPE = dsmLib.LINE_TYPE
SetupLib.RX = dsmLib.RX
SetupLib.DISP_ATTR = dsmLib.DISP_ATTR
SetupLib.BACK_BUTTON = dsmLib.BACK_BUTTON
SetupLib.NEXT_BUTTON = dsmLib.NEXT_BUTTON
SetupLib.PREV_BUTTON = dsmLib.PREV_BUTTON
SetupLib.MAX_MENU_LINES = dsmLib.MAX_MENU_LINES
-- Export Shared Context Variables
SetupLib.DSM_Context = dsmLib.DSM_Context
-- Export Functions
SetupLib.LOG_write = dsmLib.LOG_write
SetupLib.LOG_close = dsmLib.LOG_close
SetupLib.getElapsedTime = dsmLib.getElapsedTime
SetupLib.Get_Text = ST_Get_Text
SetupLib.Get_List_Text = ST_Get_List_Text
SetupLib.Get_List_Text_Img = ST_Get_List_Text_Img
SetupLib.phase2String = dsmLib.phase2String
SetupLib.menu2String = dsmLib.menu2String
SetupLib.menuLine2String = dsmLib.menuLine2String
SetupLib.isSelectableLine = dsmLib.isSelectableLine
SetupLib.isEditableLine = dsmLib.isEditableLine
SetupLib.isListLine = dsmLib.isListLine
SetupLib.isPercentValueLine = dsmLib.isPercentValueLine
SetupLib.isNumberValueLine = dsmLib.isNumberValueLine
SetupLib.isDisplayAttr = dsmLib.isDisplayAttr
SetupLib.isFlightModeLine = dsmLib.isFlightModeLine
SetupLib.GetFlightModeValue = dsmLib.GetFlightModeValue
SetupLib.StartConnection = ST_StartConnection -- Override Function
SetupLib.ReleaseConnection = ST_ReleaseConnection -- Override Function
SetupLib.ChangePhase = dsmLib.ChangePhase
SetupLib.Value_Add = dsmLib.Value_Add
SetupLib.Value_Default = dsmLib.Value_Default
SetupLib.Value_Write_Validate = dsmLib.Value_Write_Validate
SetupLib.GotoMenu = dsmLib.GotoMenu
SetupLib.MoveSelectionLine = dsmLib.MoveSelectionLine
SetupLib.Send_Receive = ST_SendReceive -- Override Function
SetupLib.Init = ST_Init
SetupLib.Init_Text = ST_Init_Text
SetupLib.CreateDSMPortChannelInfo = CreateDSMPortChannelInfo
return SetupLib
Reference in New Issue View Git Blame Copy Permalink