/* This project is free software: you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation, either version 3 of the License, or (at your option) any later version. Multiprotocol is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details. You should have received a copy of the GNU General Public License along with Multiprotocol. If not, see . */ //------------------------------- //------------------------------- //CC2500 SPI routines //------------------------------- //------------------------------- #ifdef CC2500_INSTALLED #include "iface_cc2500.h" //---------------------------- void CC2500_WriteReg(uint8_t address, uint8_t data) { CC25_CSN_off; SPI_Write(address); NOP(); SPI_Write(data); CC25_CSN_on; } //---------------------- static void CC2500_ReadRegisterMulti(uint8_t address, uint8_t data[], uint8_t length) { CC25_CSN_off; SPI_Write(CC2500_READ_BURST | address); for(uint8_t i = 0; i < length; i++) data[i] = SPI_Read(); CC25_CSN_on; } //-------------------------------------------- static uint8_t CC2500_ReadReg(uint8_t address) { uint8_t result; CC25_CSN_off; SPI_Write(CC2500_READ_SINGLE | address); result = SPI_Read(); CC25_CSN_on; return(result); } //------------------------ void CC2500_ReadData(uint8_t *dpbuffer, uint8_t len) { CC2500_ReadRegisterMulti(CC2500_3F_RXFIFO, dpbuffer, len); } //********************************************* void CC2500_Strobe(uint8_t state) { CC25_CSN_off; SPI_Write(state); CC25_CSN_on; } static void CC2500_WriteRegisterMulti(uint8_t address, const uint8_t data[], uint8_t length) { CC25_CSN_off; SPI_Write(CC2500_WRITE_BURST | address); for(uint8_t i = 0; i < length; i++) SPI_Write(data[i]); CC25_CSN_on; } void CC2500_WriteData(uint8_t *dpbuffer, uint8_t len) { CC2500_Strobe(CC2500_SFTX); CC2500_WriteRegisterMulti(CC2500_3F_TXFIFO, dpbuffer, len); CC2500_Strobe(CC2500_STX); } void CC2500_SetTxRxMode(uint8_t mode) { if(mode == TX_EN) {//from deviation firmware CC2500_WriteReg(CC2500_00_IOCFG2, 0x2F); CC2500_WriteReg(CC2500_02_IOCFG0, 0x2F | 0x40); } else if (mode == RX_EN) { CC2500_WriteReg(CC2500_02_IOCFG0, 0x2F); CC2500_WriteReg(CC2500_00_IOCFG2, 0x2F | 0x40); } else { CC2500_WriteReg(CC2500_02_IOCFG0, 0x2F); CC2500_WriteReg(CC2500_00_IOCFG2, 0x2F); } } //------------------------ /*static void cc2500_resetChip(void) { // Toggle chip select signal CC25_CSN_on; delayMicroseconds(30); CC25_CSN_off; delayMicroseconds(30); CC25_CSN_on; delayMicroseconds(45); CC2500_Strobe(CC2500_SRES); _delay_ms(100); } */ uint8_t CC2500_Reset() { CC2500_Strobe(CC2500_SRES); delayMilliseconds(1); CC2500_SetTxRxMode(TXRX_OFF); return CC2500_ReadReg(CC2500_0E_FREQ1) == 0xC4;//check if reset } /* static void CC2500_SetPower_Value(uint8_t power) { const unsigned char patable[8]= { 0xC5, // -12dbm 0x97, // -10dbm 0x6E, // -8dbm 0x7F, // -6dbm 0xA9, // -4dbm 0xBB, // -2dbm 0xFE, // 0dbm 0xFF // 1.5dbm }; if (power > 7) power = 7; CC2500_WriteReg(CC2500_3E_PATABLE, patable[power]); } */ void CC2500_SetPower() { uint8_t power=CC2500_BIND_POWER; if(IS_BIND_DONE_on) power=IS_POWER_FLAG_on?CC2500_HIGH_POWER:CC2500_LOW_POWER; if(IS_RANGE_FLAG_on) power=CC2500_RANGE_POWER; if(prev_power != power) { CC2500_WriteReg(CC2500_3E_PATABLE, power); prev_power=power; } } #endif