/*
 This project is free software: you can redistribute it and/or modify
 it under the terms of the GNU General Public License as published by
 the Free Software Foundation, either version 3 of the License, or
 (at your option) any later version.

Multiprotocol is distributed in the hope that it will be useful,
 but WITHOUT ANY WARRANTY; without even the implied warranty of
 MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 GNU General Public License for more details.

 You should have received a copy of the GNU General Public License
 along with Multiprotocol.  If not, see <http://www.gnu.org/licenses/>.
 */

#if defined(OMP_CC2500_INO)

#include "iface_nrf250k.h"

//#define FORCE_OMP_ORIGINAL_ID
//#define OMP_TELEM_DEBUG

#define OMP_INITIAL_WAIT	500
#define OMP_PACKET_PERIOD	5000
#define OMP_RF_BIND_CHANNEL	35
#define OMP_RF_NUM_CHANNELS	8
#define OMP_PAYLOAD_SIZE	16
#define OMP_BIND_COUNT		600	//3sec

static void __attribute__((unused)) OMP_send_packet()
{
#ifdef OMP_HUB_TELEMETRY
	if(option==0) option=1;								// Select the CC2500 by default
	PE1_off; PE2_on; 									// CC2500 antenna RF2
#endif

	if(IS_BIND_IN_PROGRESS)
	{
		memcpy(packet,"BND",3);
		memcpy(&packet[3],rx_tx_addr,5);
		memcpy(&packet[8],hopping_frequency,8);
	}
	else
	{
		memset(packet,0x00,OMP_PAYLOAD_SIZE);

#ifdef OMP_HUB_TELEMETRY
		//RX telem request every 7*5=35ms
		packet_sent++;
		packet_sent %= OMP_RF_NUM_CHANNELS-1;			// Change telem RX channels every time
		if(packet_sent==0)
		{
			packet[0] |= 0x40;							// |0x40 to request RX telemetry
			NRF24L01_WriteReg(NRF24L01_05_RF_CH, hopping_frequency[hopping_frequency_no]);
		}
#endif
		
		//hopping frequency
		packet[0 ] |= hopping_frequency_no;
		XN297L_Hopping(hopping_frequency_no);
		hopping_frequency_no++;
		hopping_frequency_no &= OMP_RF_NUM_CHANNELS-1;	// 8 RF channels

		//flags
		packet[1 ] = 0x08								//unknown
				   | GET_FLAG(CH5_SW, 0x20);			// HOLD

		packet[2 ] = 0x40;								//unknown
		
		if(Channel_data[CH6] > CHANNEL_MAX_COMMAND)
			packet[2 ] |= 0x20;							// IDLE2
		else if(Channel_data[CH6] > CHANNEL_MIN_COMMAND)
			packet[1 ] |= 0x40;							// IDLE1

		if(Channel_data[CH7] > CHANNEL_MAX_COMMAND)
			packet[2 ] |= 0x08;							// 3D
		else if(Channel_data[CH7] > CHANNEL_MIN_COMMAND)
			packet[2 ] |= 0x04;							// ATTITUDE

		//trims??
		//packet[3..6]

		//channels TAER packed 11bits
		uint16_t channel=convert_channel_16b_limit(THROTTLE,0,2047);
		packet[7 ]  = channel;
		packet[8 ]  = channel>>8;
		channel=convert_channel_16b_limit(AILERON,2047,0);
		packet[8 ] |= channel<<3;
		packet[9 ]  = channel>>5;
		channel=convert_channel_16b_limit(ELEVATOR,0,2047);
		packet[9] |= channel<<6;
		packet[10]  = channel>>2;
		packet[11]  = channel>>10;
		channel=convert_channel_16b_limit(RUDDER,2047,0);
		packet[11] |= channel<<1;
		packet[12]  = channel>>7;

		//unknown
		//packet[13..15]
		packet[15] = 0x04;
	}

	XN297L_SetPower();									// Set tx_power
	XN297L_SetFreqOffset();								// Set frequency offset
	XN297L_WriteEnhancedPayload(packet, OMP_PAYLOAD_SIZE, packet_sent!=0);
}

static void __attribute__((unused)) OMP_init()
{
	//Config CC2500
#ifdef OMP_HUB_TELEMETRY
	if(option==0)
		option=1;								// Select the CC2500
#endif
	XN297L_Init();
	XN297L_SetTXAddr((uint8_t*)"FLPBD", 5);
	XN297L_HoppingCalib(OMP_RF_NUM_CHANNELS);	// Calibrate all channels
	XN297L_RFChannel(OMP_RF_BIND_CHANNEL);		// Set bind channel

#ifdef OMP_HUB_TELEMETRY
	//Config NRF
	option=0;									// Select the NRF
	XN297L_Init();
	NRF24L01_SetTxRxMode(TXRX_OFF);				// Turn it off for now
	XN297_SetRXAddr(rx_tx_addr, 5);				// Set the RX address
	NRF24L01_WriteReg(NRF24L01_11_RX_PW_P0, OMP_PAYLOAD_SIZE + 2); // packet length +2 bytes of CRC
#endif
}

static void __attribute__((unused)) OMP_initialize_txid()
{
	calc_fh_channels(OMP_RF_NUM_CHANNELS);
	#ifdef FORCE_OMP_ORIGINAL_ID
		rx_tx_addr[0]=0x4E;
		rx_tx_addr[1]=0x72;
		rx_tx_addr[2]=0x8E;
		rx_tx_addr[3]=0x70;
		rx_tx_addr[4]=0x62;
		for(uint8_t i=0; i<OMP_RF_NUM_CHANNELS;i++)
			hopping_frequency[i]=(i+3)*5;
	#endif
}

enum {
	OMP_BIND		= 0x00,
	OMP_PREPDATA	= 0x01,
	OMP_DATA		= 0x02,
	OMP_RX			= 0x03,
};

#define OMP_WRITE_TIME 850

uint16_t OMP_callback()
{
	switch(phase)
	{
		case OMP_BIND:
			if(--bind_counter==0)
				phase++;						// OMP_PREPDATA
			OMP_send_packet();
			return OMP_PACKET_PERIOD;
		case OMP_PREPDATA:
			BIND_DONE;
			XN297L_SetTXAddr(rx_tx_addr, 5);
			phase++;							// OMP_DATA
		case OMP_DATA:
			#ifdef MULTI_SYNC
				telemetry_set_input_sync(OMP_PACKET_PERIOD);
			#endif
			OMP_send_packet();
			#ifdef OMP_HUB_TELEMETRY
				if(packet_sent == 0)
				{
					phase++;						// OMP_RX
					return OMP_WRITE_TIME;
				}
				else if(packet_sent == 1)
				{
					if( NRF24L01_ReadReg(NRF24L01_07_STATUS) & _BV(NRF24L01_07_RX_DR))
					{ // a packet has been received
						if(XN297_ReadEnhancedPayload(packet_in, 16) == 16)
						{ // packet with good CRC and length
							#ifdef OMP_TELEM_DEBUG
								for(uint8_t i=0;i<16;i++)
									debug(" %02X",packet_in[i]);
							#endif
							// packet_in = 01 00 98 2C 03 19 19 F0 49 02 00 00 00 00 00 00
							// all bytes are fixed and unknown except 2 and 3 which represent the battery voltage: packet_in[3]*256+packet_in[2]=lipo voltage*100 in V
							telemetry_counter++;	//LQI
							uint16_t v=((packet_in[3]<<8)+packet_in[2]-400)/50;
							if(v>255)
								v_lipo1=255;
							else
								v_lipo1=v;
							telemetry_link=1;
							if(telemetry_lost)
							{
								telemetry_lost = 0;
								packet_count = 100;
								telemetry_counter = 100;
							}
						}
						#ifdef OMP_TELEM_DEBUG
						else
							debug("Bad RX");
						debugln("");
						#endif
					}
					NRF24L01_SetTxRxMode(TXRX_OFF);
					packet_count++;
					if(packet_count>=100)
					{//LQI calculation
						packet_count=0;
						TX_LQI=telemetry_counter;
						RX_RSSI=telemetry_counter;
						if(telemetry_counter==0)
							telemetry_lost = 1;
						telemetry_counter = 0;
					}
				}
			#endif
			return OMP_PACKET_PERIOD;
	#ifdef OMP_HUB_TELEMETRY
		case OMP_RX:
			NRF24L01_WriteReg(NRF24L01_07_STATUS, (1 << NRF24L01_07_RX_DR)    //reset the flag(s)
												| (1 << NRF24L01_07_TX_DS)
												| (1 << NRF24L01_07_MAX_RT));
			NRF24L01_FlushRx();
			NRF24L01_WriteReg(NRF24L01_00_CONFIG, (1 << NRF24L01_00_PWR_UP) | (1 << NRF24L01_00_PRIM_RX) );	// Start RX
			{
				uint16_t start=(uint16_t)micros();
				while ((uint16_t)((uint16_t)micros()-(uint16_t)start) < 500)
				{
					if(CC2500_ReadReg(CC2500_35_MARCSTATE | CC2500_READ_BURST) != 0x13)
						break;
				}
			}
			PE1_on;PE2_off;						// NRF24L01 antenna RF3
			phase = OMP_DATA;
			return OMP_PACKET_PERIOD-OMP_WRITE_TIME;
	#endif
	}
	return OMP_PACKET_PERIOD;
}

uint16_t initOMP()
{
	OMP_initialize_txid();
	OMP_init();
	hopping_frequency_no = 0;
	packet_sent = 0;
	#ifdef OMP_HUB_TELEMETRY
		packet_count = 0;
		telemetry_lost = 1;
	#endif
	if(IS_BIND_IN_PROGRESS)
	{
		bind_counter = OMP_BIND_COUNT;
		phase = OMP_BIND;
	}
	else
		phase = OMP_PREPDATA;
	return OMP_INITIAL_WAIT;
}

#endif