/* This project is free software: you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation, either version 3 of the License, or (at your option) any later version. Multiprotocol is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details. You should have received a copy of the GNU General Public License along with Multiprotocol. If not, see . */ // Last sync with bikemike FQ777-124.ino #if defined(FQ777_NRF24L01_INO) #include "iface_nrf24l01.h" #define FQ777_INITIAL_WAIT 500 #define FQ777_PACKET_PERIOD 2000 #define FQ777_PACKET_SIZE 8 #define FQ777_BIND_COUNT 1000 #define FQ777_NUM_RF_CHANNELS 4 enum { FQ777_FLAG_RETURN = 0x40, // 0x40 when not off, !0x40 when one key return FQ777_FLAG_HEADLESS = 0x04, FQ777_FLAG_EXPERT = 0x01, FQ777_FLAG_FLIP = 0x80, }; const uint8_t ssv_xor[] = {0x80,0x44,0x64,0x75,0x6C,0x71,0x2A,0x36,0x7C,0xF1,0x6E,0x52,0x9,0x9D,0x1F,0x78,0x3F,0xE1,0xEE,0x16,0x6D,0xE8,0x73,0x9,0x15,0xD7,0x92,0xE7,0x3,0xBA}; uint8_t FQ777_bind_addr [] = {0xe7,0xe7,0xe7,0xe7,0x67}; static void __attribute__((unused)) ssv_pack_dpl(uint8_t addr[], uint8_t pid, uint8_t* len, uint8_t* payload, uint8_t* packed_payload) { uint8_t i = 0; uint16_t pcf = (*len & 0x3f) << 3; pcf |= (pid & 0x3) << 1; pcf |= 0x00; // noack field uint8_t header[7] = {0}; header[6] = pcf; header[5] = (pcf >> 7) | (addr[0] << 1); header[4] = (addr[0] >> 7) | (addr[1] << 1); header[3] = (addr[1] >> 7) | (addr[2] << 1); header[2] = (addr[2] >> 7) | (addr[3] << 1); header[1] = (addr[3] >> 7) | (addr[4] << 1); header[0] = (addr[4] >> 7); // calculate the crc union { uint8_t bytes[2]; uint16_t val; } crc; crc.val=0x3c18; for (i = 0; i < 7; ++i) crc.val=crc16_update(crc.val,header[i]); for (i = 0; i < *len; ++i) crc.val=crc16_update(crc.val,payload[i]); // encode payload and crc // xor with this: for (i = 0; i < *len; ++i) payload[i] ^= ssv_xor[i]; crc.bytes[1] ^= ssv_xor[i++]; crc.bytes[0] ^= ssv_xor[i++]; // pack the pcf, payload, and crc into packed_payload packed_payload[0] = pcf >> 1; packed_payload[1] = (pcf << 7) | (payload[0] >> 1); for (i = 0; i < *len - 1; ++i) packed_payload[i+2] = (payload[i] << 7) | (payload[i+1] >> 1); packed_payload[i+2] = (payload[i] << 7) | (crc.val >> 9); ++i; packed_payload[i+2] = (crc.val >> 1 & 0x80 ) | (crc.val >> 1 & 0x7F); ++i; packed_payload[i+2] = (crc.val << 7); *len += 4; } static void __attribute__((unused)) FQ777_send_packet(uint8_t bind) { uint8_t packet_len = FQ777_PACKET_SIZE; uint8_t packet_ori[8]; if (bind) { // 4,5,6 = address fields // last field is checksum of address fields packet_ori[0] = 0x20; packet_ori[1] = 0x15; packet_ori[2] = 0x05; packet_ori[3] = 0x06; packet_ori[4] = rx_tx_addr[0]; packet_ori[5] = rx_tx_addr[1]; packet_ori[6] = rx_tx_addr[2]; packet_ori[7] = packet[4] + packet[5] + packet[6]; } else { // throt, yaw, pitch, roll, trims, flags/left button,00,right button //0-3 0x00-0x64 //4 roll/pitch/yaw trims. cycles through one trim at a time - 0-40 trim1, 40-80 trim2, 80-C0 trim3 (center: A0 20 60) //5 flags for throttle button, two buttons above throttle - def: 0x40 //6 00 ?? //7 checksum - add values in other fields /* // Trims are usually done through the radio configuration but leaving the code here just in case... uint8_t trim_mod = packet_count % 144; uint8_t trim_val = 0; if (36 <= trim_mod && trim_mod < 72) // yaw trim_val = 0x20; // don't modify yaw trim else if (108 < trim_mod && trim_mod) // pitch trim_val = map(ppm[FQ777124_TRIM_CHAN_PITCH], PPM_MIN, PPM_MAX, 0x01, 0x3E) + 0xA0 - 0x1F; else // roll trim_val = map(ppm[FQ777124_TRIM_CHAN_ROLL], PPM_MIN, PPM_MAX, 0x01, 0x3E) + 0x60 - 0x1F;*/ packet_ori[0] = convert_channel_8b_scale(THROTTLE,0,0x64); packet_ori[1] = convert_channel_8b_scale(RUDDER,0,0x64); packet_ori[2] = convert_channel_8b_scale(ELEVATOR,0,0x64); packet_ori[3] = convert_channel_8b_scale(AILERON,0,0x64); packet_ori[4] = 0x20; //trim_val; // calculated above packet_ori[5] = GET_FLAG(Servo_AUX1, FQ777_FLAG_FLIP) | GET_FLAG(Servo_AUX3, FQ777_FLAG_HEADLESS) | GET_FLAG(!Servo_AUX2, FQ777_FLAG_RETURN) | GET_FLAG(Servo_AUX4,FQ777_FLAG_EXPERT); packet_ori[6] = 0x00; // calculate checksum uint8_t checksum = 0; for (int i = 0; i < 7; ++i) checksum += packet_ori[i]; packet_ori[7] = checksum; //packet_count++; } ssv_pack_dpl( (0 == bind) ? rx_tx_addr : FQ777_bind_addr, hopping_frequency_no, &packet_len, packet_ori, packet); NRF24L01_WriteReg(NRF24L01_00_CONFIG,_BV(NRF24L01_00_PWR_UP)); NRF24L01_WriteReg(NRF24L01_05_RF_CH, hopping_frequency[hopping_frequency_no++]); hopping_frequency_no %= FQ777_NUM_RF_CHANNELS; NRF24L01_WriteReg(NRF24L01_07_STATUS, 0x70); NRF24L01_FlushTx(); NRF24L01_WritePayload(packet, packet_len); NRF24L01_WritePayload(packet, packet_len); NRF24L01_WritePayload(packet, packet_len); } static void __attribute__((unused)) FQ777_init() { NRF24L01_Initialize(); NRF24L01_SetTxRxMode(TX_EN); NRF24L01_WriteRegisterMulti(NRF24L01_10_TX_ADDR, FQ777_bind_addr, 5); NRF24L01_FlushTx(); NRF24L01_FlushRx(); NRF24L01_WriteReg(NRF24L01_01_EN_AA, 0x00); // No Auto Acknowledgement on all data pipes NRF24L01_WriteReg(NRF24L01_02_EN_RXADDR, 0x00); NRF24L01_WriteReg(NRF24L01_03_SETUP_AW, 0x03); NRF24L01_SetBitrate(NRF24L01_BR_250K); NRF24L01_SetPower(); NRF24L01_Activate(0x73); // Activate feature register NRF24L01_WriteReg(NRF24L01_1C_DYNPD, 0x00); // Disable dynamic payload length on all pipes NRF24L01_WriteReg(NRF24L01_1D_FEATURE, 0x01); NRF24L01_Activate(0x73); } uint16_t FQ777_callback() { if(bind_counter!=0) { FQ777_send_packet(1); if (bind_counter-- == 0) { NRF24L01_WriteRegisterMulti(NRF24L01_10_TX_ADDR, rx_tx_addr, 5); BIND_DONE; } } else FQ777_send_packet(0); return FQ777_PACKET_PERIOD; } uint16_t initFQ777(void) { BIND_IN_PROGRESS; // autobind protocol bind_counter = FQ777_BIND_COUNT; hopping_frequency[0] = 0x4D; hopping_frequency[1] = 0x43; hopping_frequency[2] = 0x27; hopping_frequency[3] = 0x07; hopping_frequency_no=0; rx_tx_addr[2] = 0x00; rx_tx_addr[3] = 0xe7; rx_tx_addr[4] = 0x67; FQ777_init(); return FQ777_INITIAL_WAIT; } #endif