-- FORMAT || -- Line Type: Text for Menus (T), List_Text Options (LT), List_Text_Image (LI), Flight Mode (FM), RX Name (RX) -- NO EMPTY LINES -- Formmatting at end of line: /c=Center, /r=Right, /b=Bold, /m=menu LT|0x0001|Off LT|0x0002|On -- Ihn/Act List Options LT|0x0003|Inh LT|0x0004|Act -- -- Channel selection for SAFE MODE and GAINS on FC6250HX LT|0x000C|Inh LT|0x000D|Ch5 LT|0x000E|Ch6 LT|0x000F|Ch7 LT|0x0010|Ch8 LT|0x0011|Ch9 LT|0x0012|Ch10 LT|0x0013|Ch11 LT|0x0014|Ch12 -- -- Servo Output values LT|0x002D|5.5ms LT|0x002E|11ms LT|0x002F|22ms -- -- Gain Multiplier Values LT|0x0032|1 X LT|0x0033|2 X LT|0x0034|4 X -- LT|0x0035|Inh LT|0x0036|Thr LT|0x0037|Ail LT|0x0038|Ele LT|0x0039|Rud LT|0x003A|Ch5 LT|0x003B|Ch6 LT|0x003C|Ch7 LT|0x003D|Ch8 LT|0x003E|Ch9 LT|0x003F|Ch10 LT|0x0040|Ch11 LT|0x0041|Ch12 LT|0x0042|Ch13 LT|0x0043|Ch14 LT|0x0044|Ch15 LT|0x0045|Ch16 LT|0x0046|Ch17 LT|0x0047|Ch18 LT|0x0048|Ch19 LT|0x0049|Ch20 -- T |0x0040|Roll T |0x0041|Pitch T |0x0042|Yaw T |0x0043|Gain/c/b T |0x0045|Differential T |0x0046|Priority T |0x0049|Output Setup T |0x004A|Failsafe T |0x004B|Main Menu T |0x004E|Position -- T |0x0050|Outputs T |0x0051|Output Channel 1 T |0x0052|Output Channel 2 T |0x0053|Output Channel 3 T |0x0054|Output Channel 4 T |0x0055|Output Channel 5 T |0x0056|Output Channel 6 T |0x0057|Output Channel 7 T |0x0058|Output Channel 8 T |0x0059|Output Channel 9 T |0x005A|Output Channel 10 -- -- FailSafe Options --LT|0x005E|Inh LT|0x005F|Hold Last LT|0x0060|Preset --LT|0x0061|Custom -- T |0x0071|Proportional T |0x0072|Integral T |0x0073|Derivate T |0x0078|FM Channel T |0x007F|Attitude Gain -- T |0x0080|Orientation T |0x0082|Heading T |0x0085|Frame Rate T |0x0086|System Setup T |0x0087|F-Mode Setup T |0x0088|Enabled F-Modes T |0x0089|Gain Channel T |0x008A|Gain Sensitivity/r -- Right Align T |0x008B|Panic T |0x008E|Panic Delay -- LT|0x0187|No Freq --???? unset Freq LT|0x0088|70hz LT|0x0089|90hz LT|0x008A|200hz LT|0x008B|333hz LT|0x008C|490hz LT|0x008D|560hz LT|0x008E|Normal LT|0x008F|Reversed -- FC6250HX: Callibration T |0x0090|Apply T |0x0091|Begin T |0x0092|Start T |0x0093|Complete T |0x0094|Done -- -- FC6250HX: Swashplate Type -- LT|0x0090|Normal LI|0x0090|h_swp_norm.png|Normal LT|0x0091|3 Servos 120 Y LI|0x0091|h_swp_3_120.png|3 Servos 120 Y LT|0x0092|3 Servos 120 Y-Inv LI|0x0092|h_swp_3_120inv.png|3 Servos 120 Y-Inv LT|0x0093|3 Servos 135 Y LI|0x0093|h_swp_3_135.png|3 Servos 135 Y LT|0x0094|3 Servos 135 Y-Inv LI|0x0094|h_swp_3_135inv.png|3 Servos 135 Y-Inv LT|0x0095|3 Servos 140 Y LI|0x0095|h_swp_3_140.png|3 Servos 140 Y LT|0x0096|3 Servos 140 Y-Inv LI|0x0096|h_swp_3_140inv.png|3 Servos 140 Y-Inv LT|0x0097|3 Servos 90 T LI|0x0097|h_swp_3_90.png|3 Servos 90 T LT|0x0098|3 Servos 90 T-Inv LI|0x0098|h_swp_3_90inv.png|3 Servos 90 T-Inv -- T |0x0097|Factory Reset T |0x0098|Factory Reset T |0x0099|Advanced Setup T |0x009A|Capture Failsafe Positions T |0x009C|Custom Failsafe -- T |0x009F|Save Settings -- Save & Reboot RX -- T |0x00A5|First Time Setup T |0x00AA|Capture Gyro Gains T |0x00AD|Gain Channel Select T |0x00AF|Dynamic LT|0x00B0|Self-Level LT|0x00B1|Envelope -- -- Flight Modes List Options LT|0x00B5|Inh LT|0x00B6|FM1 LT|0x00B7|FM2 LT|0x00B8|FM3 LT|0x00B9|FM4 LT|0x00BA|FM5 LT|0x00BB|FM6 LT|0x00BC|FM7 LT|0x00BD|FM8 LT|0x00BE|FM9 LT|0x00BF|FM10 -- T |0x00BE|Unknown_BE -- Used in Reset menu (0x0001) while the RX is rebooting -- T |0x00C7|Calibrate Sensor T |0x00C8|Sensor is Calibrating.. Wait T |0x00CA|SAFE & Panic Mode Setup -- T |0x00CD|Level model & capt attitude/m -- SPECIAL MENU to itself who is not a comment T |0x00CE|Error TX Conf T |0x00CF|Invalid TX Ch Conf 1 T |0x00D0|Invalid TX Ch Conf 2 -- -- RX Orientations for AR631/AR637, Optionally attach an Image + Alt Text to display LT|0x00CB|Pos 1 LI|0x00CB|rx_pos_1.png|Pilot View: RX Label Up, Pins Back LT|0x00CC|Pos 2 LI|0x00CC|rx_pos_2.png|Pilot View: RX Label Left, Pins Back LT|0x00CD|Pos 3 LI|0x00CD|rx_pos_3.png|Pilot View: RX Label Down, Pins Back LT|0x00CE|Pos 4 LI|0x00CE|rx_pos_4.png|Pilot View: RX Label Right, Pins Back LT|0x00CF|Pos 5 LI|0x00CF|rx_pos_5.png|Pilot View: RX Label UP, Pins to Front LT|0x00D0|Pos 6 LI|0x00D0|rx_pos_6.png|Pilot View: RX Label Left, Pins Front LT|0x00D1|Pos 7 LI|0x00D1|rx_pos_7.png|Pilot View: RX Label Down, Pins Front LT|0x00D2|Pos 8 LI|0x00D2|rx_pos_8.png|Pilot View: RX Label Right, Pins Front LT|0x00D3|Pos 9 LI|0x00D3|rx_pos_9.png|Pilot View: RX Label Up, Pins Left LT|0x00D4|Pos 10 LI|0x00D4|rx_pos_10.png|Pilot View: RX Label Back, Pins Left LT|0x00D5|Pos 11 LI|0x00D5|rx_pos_11.png|Pilot View: RX Label Down, Pins Left LT|0x00D6|Pos 12 LI|0x00D6|rx_pos_12.png|Pilot View: RX Label Front, Pins Left LT|0x00D7|Pos 13 LI|0x00D7|rx_pos_13.png|Pilot View: RX Label Up, Pins Right LT|0x00D8|Pos 14 LI|0x00D8|rx_pos_14.png|Pilot View: RX Label Back, Pins Right LT|0x00D9|Pos 15 LI|0x00D9|rx_pos_15.png|Pilot View: RX Label Down, Pins Right LT|0x00DA|Pos 16 LI|0x00DA|rx_pos_16.png|Pilot View: RX Label Front, Pins Right LT|0x00DB|Pos 17 LI|0x00DB|rx_pos_17.png|Pilot View: RX Label Back, Pins Down LT|0x00DC|Pos 18 LI|0x00DC|rx_pos_18.png|Pilot View: RX Label Left, Pins Down LT|0x00DD|Pos 19 LI|0x00DD|rx_pos_19.png|Pilot View: RX Label Front, Pins Down LT|0x00DE|Pos 20 LI|0x00DE|rx_pos_20.png|Pilot View: RX Label Right, Pins Down LT|0x00DF|Pos 21 LI|0x00DF|rx_pos_21.png|Pilot View: RX Label Back, Pins Up LT|0x00E0|Pos 22 LI|0x00E0|rx_pos_22.png|Pilot View: RX Label Left, Pins Up LT|0x00E1|Pos 23 LI|0x00E1|rx_pos_23.png|Pilot View: RX Label Front, Pins Up LT|0x00E2|Pos 24 LI|0x00E2|rx_pos_24.png|Pilot View: RX Label Right, Pins Up LT|0x00E3|Pos Invalid LI|0x00E3|rx_pos_25.png|Cannot detect orientation of RX -- -- RX Orientations images for FC5250 (HACK add 0x100 internally to differenciate for helis) LI|0x01CB|h_rx_pos_1.png|Pilot View: RX Label Up, Pins Front LI|0x01CC|h_rx_pos_2.png|Pilot View: RX Label Left, Pins Front LI|0x01CD|h_rx_pos_3.png|Pilot View: RX Label Down, Pins Front LI|0x01CE|h_rx_pos_4.png|Pilot View: RX Label Right, Pins Front LI|0x01CF|h_rx_pos_5.png|Pilot View: RX Label UP, Pins to Back LI|0x01D0|h_rx_pos_6.png|Pilot View: RX Label Left, Pins Back LI|0x01D1|h_rx_pos_7.png|Pilot View: RX Label Down, Pins Back LI|0x01D2|h_rx_pos_8.png|Pilot View: RX Label Right, Pins Back -- T |0x00D1|Receiver will Reboot/b T |0x00D2|Panic Channel T |0x00D3|Swashplate T |0x00D5|Agility T |0x00D8|Stop T |0x00DA|SAFE/c/b -- Center + Bold T |0x00DB|Stability T |0x00DC|@ per sec T |0x00DD|Tail rotor T |0x00DE|Setup T |0x00DF|AFR T |0x00E0|Collective T |0x00E1|Subtrim T |0x00E2|Phasing T |0x00E3|Pre-Comp T |0x00E4|E-Ring T |0x00E5|Swash Type T |0x00E6|Travel T |0x00E7|Left T |0x00E8|Right T |0x00EA|Low Throttle -- T |0x00F2|Governor T |0x00F4|Soft Start -- LT|0x00F2|Fixed LT|0x00F3|Adjustable LT|0x00F4|Inh LT|0x00F5|Nitro -- T |0x00F6|Direction T |0x00F8|Settings -- ?? validate on a Spektrum radio T |0x00F9|Gyro settings T |0x00FE|Stick Priority/c/b -- T |0x0100|Make sure the model has been T |0x0101|configured, including wing type, T |0x0102|reversing, travel, trimmed, etc. T |0x0103|before continuing setup. T |0x0104| T |0x0105| -- Blank -- T |0x0106|Any wing type, channel assignment, T |0x0107|subtrim, or servo reversing changes T |0x0108|require running through initial T |0x0109|setup again. T |0x010A| T |0x010B| -- T |0x0190|Relearn Servo Settings T |0x019C|Enter Receiver Bind Mode T |0x01AA|Offset T |0x01D7|SAFE Select Channel T |0x01DC|AS3X/c/b -- Center + Bold T |0x01DD|AS3X Settings T |0x01DE|AS3X Gains T |0x01E0|Rate Gains/c/b T |0x01E2|SAFE Settings T |0x01E3|SAFE Gains T |0x01E6|Attitude Trim/c/b T |0x01E7|Envelope T |0x01E9|Roll Right T |0x01EA|Roll Left T |0x01EB|Pitch Down T |0x01EC|Pitch Up T |0x01EE|Thr to Pitch T |0x01EF|Low Thr to Pitch/c/b T |0x01F0|High Thr to Pitch/c/b T |0x01F1|Filter T |0x01F3|Threshold T |0x01F4|Angle T |0x01F6|Failsafe Angles/c/b T |0x01F8|Safe Mode T |0x01F9|SAFE Select T |0x01FC|Panic F-Mode T |0x01FD|FailSafe Flight Mode -- Safe Flight Mode T |0x0201|Throttle T |0x0204|Hover T |0x0208|Decay T |0x0209|Save to Backup T |0x020A|Restore from Backup T |0x020D|First Time SAFE Setup -- -- First time safe setup Page 3 : T |0x020E|AS3X gains must be tuned T |0x020F|and active in SAFE Flight Modes T |0x0210|to help reduce wobble. T |0x0211| T |0x0212| T |0x0213| -- Blank -- -- AS3X orientation Setting menu (Level) T |0x021A|Set the model level, T |0x021B|and press Continue. T |0x021C| T |0x021D| -- Blank -- -- AS3X orientation Setting menu (Nose down) T |0x021F|Set the model on its nose, T |0x0220|and press Continue. If the T |0x0221|orientation on the next T |0x0222|screen is wrong go back T |0x0223|and try again. T |0x0224|Continue -- T |0x0226|Angle Limits/c/b T |0x0227|Other settings T |0x0229|Set Orientation Manually -- -- Factory Default Warning T |0x022B|WARNING! T |0x022C|This will reset the T |0x022D|configuration to factory T |0x022E|defaults. This does not T |0x022F|affect the backup config. T |0x0230| -- Blank -- -- Backup Warning T |0x0231|This will overwrite the T |0x0232|backup memory with your T |0x0233|current configuartion. T |0x0234| T |0x0235| -- Blank -- -- Restore from Backup Warning T |0x0236|This will overwrite the T |0x0237|current config with T |0x0238|that which is in T |0x0239|the backup memory. T |0x023A| -- Blank -- -- Utilities Copy flight modes T |0x023D|Copy F-Mode Settings T |0x023E|Source F-Mode T |0x023F|Target F-Mode -- T |0x0240|Utilities -- -- Gain Capture Page T |0x024C|Gains will be captured on T |0x024D|Captured gains will be T |0x024E|Gains on T |0x024F|were captured and changed T |0x0250|from Adjustable to Fixed -- -- Utilities, Copy flight mode (Copy Confirmation, oveerriding FM) T |0x0251|Are you sure you want to ovewrite the "Target" T |0x0252|with the "Source" ? T |0x0253| -- Blank -- T |0x0254|Pos = Up, Neg = Down -- -- First time safe setup Page 1 (maybe ask to select Flight Mode cannel) T |0x0255|Before setting up SAFE T |0x0256|a Flight Mode channel T |0x0257|most be configured. -- -- First time safe setup Page 2 (something related for flight mode) T |0x025A|Select the desired flight mode T |0x025B|switch position to adjust settings T |0x025C|for each flight mode T |0x025D| T |0x025E| -- Blank -- -- Utilities, Copy flight mode (Confirm) T |0x0259|YES T |0x0260|WARNING: "Target" T |0x0261|F-Mode will be overwritten T |0x0262|by "Source" -- T |0x0263|Fixed/Adjustable Gains/c/b T |0x0266|Heading Gain/c/b T |0x0267|Pos = Nose Up/Roll Right T |0x0268|Neg = Nose Down/Roll Left T |0x0269|SAFE - Thr to Pitch T |0x026A|Use CAUTION for Yaw gain!/b -- T |0x026B|Head Speed T |0x026C|Pinion T |0x026D|Main Gear T |0x026F|RPM Sensor T |0x0272|Show Advanced Menus -- T |0x0300|No compatible DSM RX... T |0x0301|Waiting for RX to Restart -- FM|0x8000|Flight Mode/c/b -- RX|0x0001|AR636 RX|0x0014|SPM4651T RX|0x0015|AR637T RX|0x0016|AR637TA RX|0x0018|FC6250HX RX|0x0019|AR630 RX|0x001A|AR8360T RX|0x001B|AR8020T RX|0x001C|AR10360T RX|0x001E|AR631