#!/usr/bin/env bash

exitcode=0;

printf "\n\e[33;1mBuilding multi-stm-erskytx-aetr-inv-v$MULTI_VERSION.bin\e[0m";
opt_enable CHECK_FOR_BOOTLOADER;
opt_disable ENABLE_PPM;
opt_enable $ALL_PROTOCOLS;
opt_enable MULTI_STATUS;
opt_disable MULTI_TELEMETRY;
buildMulti;
exitcode=$((exitcode+$?));
mv build/Multiprotocol.ino.bin ./binaries/multi-stm-erskytx-aetr-inv-v$MULTI_VERSION.bin;
printf "\n\e[33;1mBuilding multi-stm-erskytx-taer-inv-v$MULTI_VERSION.bin\e[0m";
opt_replace AETR TAER;
buildMulti;
exitcode=$((exitcode+$?));
mv build/Multiprotocol.ino.bin ./binaries/multi-stm-erskytx-taer-inv-v$MULTI_VERSION.bin;
printf "\n\e[33;1mBuilding multi-stm-erskytx-reta-inv-v$MULTI_VERSION.bin\e[0m";
opt_replace TAER RETA;
buildMulti;
exitcode=$((exitcode+$?));
mv build/Multiprotocol.ino.bin ./binaries/multi-stm-erskytx-reta-inv-v$MULTI_VERSION.bin;
printf "\n\e[33;1mBuilding multi-stm-erskytx-aetr-noinv-v$MULTI_VERSION.bin\e[0m";
opt_replace RETA AETR;
opt_disable INVERT_TELEMETRY;
buildMulti;
exitcode=$((exitcode+$?));
mv build/Multiprotocol.ino.bin ./binaries/multi-stm-erskytx-aetr-noinv-v$MULTI_VERSION.bin;
printf "\n\e[33;1mBuilding multi-stm-erskytx-taer-noinv-v$MULTI_VERSION.bin\e[0m";
opt_replace AETR TAER;
buildMulti;
exitcode=$((exitcode+$?));
mv build/Multiprotocol.ino.bin ./binaries/multi-stm-erskytx-taer-noinv-v$MULTI_VERSION.bin;
printf "\n\e[33;1mBuilding multi-stm-erskytx-reta-noinv-v$MULTI_VERSION.bin\e[0m";
opt_replace TAER RETA;
buildMulti;
exitcode=$((exitcode+$?));
mv build/Multiprotocol.ino.bin ./binaries/multi-stm-erskytx-reta-noinv-v$MULTI_VERSION.bin;
printf "\n\e[33;1mBuilding multi-stm-opentx-aetr-inv-v$MULTI_VERSION.bin\e[0m";
opt_replace RETA AETR;
opt_disable MULTI_STATUS;
opt_enable MULTI_TELEMETRY;
opt_enable INVERT_TELEMETRY;
buildMulti;
exitcode=$((exitcode+$?));
mv build/Multiprotocol.ino.bin ./binaries/multi-stm-opentx-aetr-inv-v$MULTI_VERSION.bin;
printf "\n\e[33;1mBuilding multi-stm-opentx-taer-inv-v$MULTI_VERSION.bin\e[0m";
opt_replace AETR TAER;
buildMulti;
exitcode=$((exitcode+$?));
mv build/Multiprotocol.ino.bin ./binaries/multi-stm-opentx-taer-inv-v$MULTI_VERSION.bin;
printf "\n\e[33;1mBuilding multi-stm-opentx-reta-inv-v$MULTI_VERSION.bin\e[0m";
opt_replace TAER RETA;
buildMulti;
exitcode=$((exitcode+$?));
mv build/Multiprotocol.ino.bin ./binaries/multi-stm-opentx-reta-inv-v$MULTI_VERSION.bin;
printf "\n\e[33;1mBuilding multi-stm-opentx-aetr-noinv-v$MULTI_VERSION.bin\e[0m";
opt_replace RETA AETR;
opt_disable INVERT_TELEMETRY;
buildMulti;
exitcode=$((exitcode+$?));
mv build/Multiprotocol.ino.bin ./binaries/multi-stm-opentx-aetr-noinv-v$MULTI_VERSION.bin;
printf "\n\e[33;1mBuilding multi-stm-opentx-taer-noinv-v$MULTI_VERSION.bin\e[0m";
opt_replace AETR TAER;
buildMulti;
exitcode=$((exitcode+$?));
mv build/Multiprotocol.ino.bin ./binaries/multi-stm-opentx-taer-noinv-v$MULTI_VERSION.bin;
printf "\n\e[33;1mBuilding multi-stm-opentx-reta-noinv-v$MULTI_VERSION.bin\e[0m";
opt_replace TAER RETA;
buildMulti;
exitcode=$((exitcode+$?));
mv build/Multiprotocol.ino.bin ./binaries/multi-stm-opentx-reta-noinv-v$MULTI_VERSION.bin;
printf "\n\e[33;1mBuilding multi-cc2500-opentx-aetr-noinv-v$MULTI_VERSION.bin\e[0m";
opt_replace RETA AETR;
opt_disable A7105_INSTALLED;
opt_disable CYRF6936_INSTALLED;
opt_disable NRF24L01_INSTALLED;
buildMulti;
exitcode=$((exitcode+$?));
mv build/Multiprotocol.ino.bin ./binaries/multi-cc2500-opentx-aetr-noinv-v$MULTI_VERSION.bin;
printf "\n\e[33;1mBuilding multi-cc2500-opentx-taer-noinv-v$MULTI_VERSION.bin\e[0m";
opt_replace AETR TAER;
buildMulti;
exitcode=$((exitcode+$?));
mv build/Multiprotocol.ino.bin ./binaries/multi-cc2500-opentx-taer-noinv-v$MULTI_VERSION.bin;
printf "\n\e[33;1mBuilding multi-cc2500-opentx-reta-noinv-v$MULTI_VERSION.bin\e[0m";
opt_replace TAER RETA;
buildMulti;
exitcode=$((exitcode+$?));
mv build/Multiprotocol.ino.bin ./binaries/multi-cc2500-opentx-reta-noinv-v$MULTI_VERSION.bin;
printf "\n\e[33;1mBuilding multi-stm-ppm-aetr-noinv-v$MULTI_VERSION.bin\e[0m";
opt_enable A7105_INSTALLED;
opt_enable CYRF6936_INSTALLED;
opt_enable NRF24L01_INSTALLED;
opt_enable ENABLE_PPM;
opt_disable ENABLE_SERIAL;
opt_replace RETA AETR;
opt_disable MULTI_STATUS;
opt_disable MULTI_TELEMETRY;
opt_set NBR_BANKS 5;
buildMulti;
exitcode=$((exitcode+$?));
mv build/Multiprotocol.ino.bin ./binaries/multi-stm-ppm-aetr-noinv-v$MULTI_VERSION.bin;
printf "\n\e[33;1mBuilding multi-stm-ppm-taer-noinv-v$MULTI_VERSION.bin\e[0m";
opt_replace AETR TAER;
buildMulti;
exitcode=$((exitcode+$?));
mv build/Multiprotocol.ino.bin ./binaries/multi-stm-ppm-taer-noinv-v$MULTI_VERSION.bin;
printf "\n\e[33;1mBuilding multi-stm-ppm-reta-noinv-v$MULTI_VERSION.bin\e[0m";
opt_replace TAER RETA;
buildMulti;
exitcode=$((exitcode+$?));
mv build/Multiprotocol.ino.bin ./binaries/multi-stm-ppm-reta-noinv-v$MULTI_VERSION.bin; 

return $exitcode;