#!/usr/bin/env bash

source ./buildroot/bin/buildFunctions;
exitcode=0;

# Generic 4-in-1 AIR builds
printf "\e[33;1mBuilding mm-stm-serial-aetr-air-v$MULTI_VERSION.bin\e[0m\n";
opt_add MULTI_AIR
opt_disable ENABLE_PPM;
buildMulti;
exitcode=$((exitcode+$?));
mv build/Multiprotocol.ino.bin ./binaries/mm-stm-serial-aetr-air-v$MULTI_VERSION.bin;

printf "\e[33;1mBuilding mm-stm-serial-taer-air-v$MULTI_VERSION.bin\e[0m\n";
opt_replace AETR TAER;
buildMulti;
exitcode=$((exitcode+$?));
mv build/Multiprotocol.ino.bin ./binaries/mm-stm-serial-taer-air-v$MULTI_VERSION.bin;

printf "\e[33;1mBuilding mm-stm-serial-reta-air-v$MULTI_VERSION.bin\e[0m\n";
opt_replace TAER RETA;
buildMulti;
exitcode=$((exitcode+$?));
mv build/Multiprotocol.ino.bin ./binaries/mm-stm-serial-reta-air-v$MULTI_VERSION.bin;

# Generic 4-in-1 SURFACE builds
printf "\e[33;1mBuilding mm-stm-serial-aetr-sfc-v$MULTI_VERSION.bin\e[0m\n";
opt_replace RETA AETR;
opt_remove MULTI_AIR;
opt_add MULTI_SURFACE;
buildMulti;
exitcode=$((exitcode+$?));
mv build/Multiprotocol.ino.bin ./binaries/mm-stm-serial-aetr-sfc-v$MULTI_VERSION.bin;

printf "\e[33;1mBuilding mm-stm-serial-taer-sfc-v$MULTI_VERSION.bin\e[0m\n";
opt_replace AETR TAER;
buildMulti;
exitcode=$((exitcode+$?));
mv build/Multiprotocol.ino.bin ./binaries/mm-stm-serial-taer-sfc-v$MULTI_VERSION.bin;

printf "\e[33;1mBuilding mm-stm-serial-reta-sfc-v$MULTI_VERSION.bin\e[0m\n";
opt_replace TAER RETA;
buildMulti;
exitcode=$((exitcode+$?));
mv build/Multiprotocol.ino.bin ./binaries/mm-stm-serial-reta-sfc-v$MULTI_VERSION.bin;

# Generic 4-in-1 LBT/EU builds
printf "\e[33;1mBuilding mm-stm-serial-aetr-lbt-v$MULTI_VERSION.bin\e[0m\n";
opt_replace RETA AETR;
opt_remove MULTI_SURFACE;
opt_add MULTI_EU;
buildMulti;
exitcode=$((exitcode+$?));
mv build/Multiprotocol.ino.bin ./binaries/mm-stm-serial-aetr-lbt-v$MULTI_VERSION.bin;

printf "\e[33;1mBuilding mm-stm-serial-taer-lbt-v$MULTI_VERSION.bin\e[0m\n";
opt_replace AETR TAER;
buildMulti;
exitcode=$((exitcode+$?));
mv build/Multiprotocol.ino.bin ./binaries/mm-stm-serial-taer-lbt-v$MULTI_VERSION.bin;

printf "\e[33;1mBuilding mm-stm-serial-reta-lbt-v$MULTI_VERSION.bin\e[0m\n";
opt_replace TAER RETA;
buildMulti;
exitcode=$((exitcode+$?));
mv build/Multiprotocol.ino.bin ./binaries/mm-stm-serial-reta-lbt-v$MULTI_VERSION.bin;

# DIY 5-in-1 AIR builds
printf "\e[33;1mBuilding mm-stm-5in1-aetr-air-v$MULTI_VERSION.bin\e[0m\n";
opt_add MULTI_AIR;
opt_remove MULTI_EU;
opt_replace RETA AETR;
opt_disable CFLIE_NRF24L01_INO
opt_enable SX1276_INSTALLED;
buildMulti;
exitcode=$((exitcode+$?));
mv build/Multiprotocol.ino.bin ./binaries/mm-stm-5in1-aetr-air-v$MULTI_VERSION.bin;

printf "\e[33;1mBuilding mm-stm-5in1-taer-air-v$MULTI_VERSION.bin\e[0m\n";
opt_replace AETR TAER;
buildMulti;
exitcode=$((exitcode+$?));
mv build/Multiprotocol.ino.bin ./binaries/mm-stm-5in1-taer-air-v$MULTI_VERSION.bin;

printf "\e[33;1mBuilding mm-stm-5in1-reta-air-v$MULTI_VERSION.bin\e[0m\n";
opt_replace TAER RETA;
buildMulti;
exitcode=$((exitcode+$?));
mv build/Multiprotocol.ino.bin ./binaries/mm-stm-5in1-reta-air-v$MULTI_VERSION.bin;

# DIY 5-in-1 SURFACE builds
printf "\e[33;1mBuilding mm-stm-5in1-aetr-sfc-v$MULTI_VERSION.bin\e[0m\n";
opt_add MULTI_SURFACE;
opt_remove MULTI_AIR;
opt_enable CFLIE_NRF24L01_INO
opt_replace RETA AETR;
buildMulti;
exitcode=$((exitcode+$?));
mv build/Multiprotocol.ino.bin ./binaries/mm-stm-5in1-aetr-sfc-v$MULTI_VERSION.bin;

printf "\e[33;1mBuilding mm-stm-5in1-taer-sfc-v$MULTI_VERSION.bin\e[0m\n";
opt_replace AETR TAER;
buildMulti;
exitcode=$((exitcode+$?));
mv build/Multiprotocol.ino.bin ./binaries/mm-stm-5in1-taer-sfc-v$MULTI_VERSION.bin;

printf "\e[33;1mBuilding mm-stm-5in1-reta-sfc-v$MULTI_VERSION.bin\e[0m\n";
opt_replace TAER RETA;
buildMulti;
exitcode=$((exitcode+$?));
mv build/Multiprotocol.ino.bin ./binaries/mm-stm-5in1-reta-sfc-v$MULTI_VERSION.bin;

# T-Lite 5-in-1 AIR builds
printf "\e[33;1mBuilding mm-tlite5in1-aetr-air-v$MULTI_VERSION.bin\e[0m\n";
opt_add MULTI_AIR;
opt_remove MULTI_SURFACE;
opt_replace RETA AETR;
opt_disable INVERT_TELEMETRY;
opt_disable SX1276_INSTALLED;
opt_enable "MULTI_5IN1_INTERNAL JP_TLite"
buildMulti;
exitcode=$((exitcode+$?));
mv build/Multiprotocol.ino.bin ./binaries/mm-tlite5in1-aetr-air-v$MULTI_VERSION.bin;

printf "\e[33;1mBuilding mm-tlite5in1-taer-air-v$MULTI_VERSION.bin\e[0m\n";
opt_replace AETR TAER;
buildMulti;
exitcode=$((exitcode+$?));
mv build/Multiprotocol.ino.bin ./binaries/mm-tlite5in1-taer-air-v$MULTI_VERSION.bin;

printf "\e[33;1mBuilding mm-tlite5in1-reta-air-v$MULTI_VERSION.bin\e[0m\n";
opt_replace TAER RETA;
buildMulti;
exitcode=$((exitcode+$?));
mv build/Multiprotocol.ino.bin ./binaries/mm-tlite5in1-reta-air-v$MULTI_VERSION.bin;

# T-Lite 5-in-1 SURFACE builds
printf "\e[33;1mBuilding mm-tlite5in1-aetr-sfc-v$MULTI_VERSION.bin\e[0m\n";
opt_add MULTI_SURFACE;
opt_remove MULTI_AIR;
opt_replace RETA AETR;
buildMulti;
exitcode=$((exitcode+$?));
mv build/Multiprotocol.ino.bin ./binaries/mm-tlite5in1-aetr-sfc-v$MULTI_VERSION.bin;

printf "\e[33;1mBuilding mm-tlite5in1-taer-sfc-v$MULTI_VERSION.bin\e[0m\n";
opt_replace AETR TAER;
buildMulti;
exitcode=$((exitcode+$?));
mv build/Multiprotocol.ino.bin ./binaries/mm-tlite5in1-taer-sfc-v$MULTI_VERSION.bin;

printf "\e[33;1mBuilding mm-tlite5in1-reta-sfc-v$MULTI_VERSION.bin\e[0m\n";
opt_replace TAER RETA;
buildMulti;
exitcode=$((exitcode+$?));
mv build/Multiprotocol.ino.bin ./binaries/mm-tlite5in1-reta-sfc-v$MULTI_VERSION.bin;

# CC2500-only FCC builds
printf "\e[33;1mBuilding mm-stm-cc2500-aetr-v$MULTI_VERSION.bin\e[0m\n";
opt_remove MULTI_SURFACE;
opt_replace RETA AETR;
opt_disable "MULTI_5IN1_INTERNAL JP_TLite"
opt_disable A7105_INSTALLED;
opt_disable CYRF6936_INSTALLED;
opt_disable NRF24L01_INSTALLED;
opt_disable INVERT_TELEMETRY;
buildMulti;
exitcode=$((exitcode+$?));
mv build/Multiprotocol.ino.bin ./binaries/mm-stm-cc2500-aetr-v$MULTI_VERSION.bin;

printf "\e[33;1mBuilding mm-stm-cc2500-taer-v$MULTI_VERSION.bin\e[0m\n";
opt_replace AETR TAER;
buildMulti;
exitcode=$((exitcode+$?));
mv build/Multiprotocol.ino.bin ./binaries/mm-stm-cc2500-taer-v$MULTI_VERSION.bin;

printf "\e[33;1mBuilding mm-stm-cc2500-reta-v$MULTI_VERSION.bin\e[0m\n";
opt_replace TAER RETA;
buildMulti;
exitcode=$((exitcode+$?));
mv build/Multiprotocol.ino.bin ./binaries/mm-stm-cc2500-reta-v$MULTI_VERSION.bin;

# CC2500-only LBT/EU builds
printf "\e[33;1mBuilding mm-stm-cc2500-aetr-lbt-v$MULTI_VERSION.bin\e[0m\n";
opt_replace RETA AETR;
opt_add MULTI_EU;
buildMulti;
exitcode=$((exitcode+$?));
mv build/Multiprotocol.ino.bin ./binaries/mm-stm-cc2500-aetr-lbt-v$MULTI_VERSION.bin;

printf "\e[33;1mBuilding mm-stm-cc2500-taer-lbt-v$MULTI_VERSION.bin\e[0m\n";
opt_replace AETR TAER;
buildMulti;
exitcode=$((exitcode+$?));
mv build/Multiprotocol.ino.bin ./binaries/mm-stm-cc2500-taer-lbt-v$MULTI_VERSION.bin;

printf "\e[33;1mBuilding mm-stm-cc2500-reta-lbt-v$MULTI_VERSION.bin\e[0m\n";
opt_replace TAER RETA;
buildMulti;
exitcode=$((exitcode+$?));
mv build/Multiprotocol.ino.bin ./binaries/mm-stm-cc2500-reta-lbt-v$MULTI_VERSION.bin;

# 4-in-1 PPM builds
printf "\e[33;1mBuilding mm-stm-ppm-aetr-v$MULTI_VERSION.bin\e[0m\n";
opt_add MULTI_AIR;
opt_enable A7105_INSTALLED;
opt_enable CYRF6936_INSTALLED;
opt_enable NRF24L01_INSTALLED;
opt_remove MULTI_EU;
opt_enable ENABLE_PPM;
opt_disable ENABLE_SERIAL;
opt_replace RETA AETR;
opt_disable MULTI_STATUS;
opt_disable MULTI_TELEMETRY;
opt_set NBR_BANKS 5;
buildMulti;
exitcode=$((exitcode+$?));
mv build/Multiprotocol.ino.bin ./binaries/mm-stm-ppm-aetr-v$MULTI_VERSION.bin;

printf "\e[33;1mBuilding mm-stm-ppm-taer-v$MULTI_VERSION.bin\e[0m\n";
opt_replace AETR TAER;
buildMulti;
exitcode=$((exitcode+$?));
mv build/Multiprotocol.ino.bin ./binaries/mm-stm-ppm-taer-v$MULTI_VERSION.bin;

printf "\e[33;1mBuilding mm-stm-ppm-reta-v$MULTI_VERSION.bin\e[0m\n";
opt_replace TAER RETA;
buildMulti;
exitcode=$((exitcode+$?));
mv build/Multiprotocol.ino.bin ./binaries/mm-stm-ppm-reta-v$MULTI_VERSION.bin; 

exit $exitcode;