Set reserved field in CABELL packet to current channel (#593)

* Add the IKEA Ansluta remote-controllable lighting protocol

* Fixes to IKEA Ansluta implementation

.github/FUNDING.yml

@@ -0,0 +1,12 @@
+# These are supported funding model platforms
+
+github: [pascallanger]
+patreon: # Replace with a single Patreon username
+open_collective: # Replace with a single Open Collective username
+ko_fi: # Replace with a single Ko-fi username
+tidelift: # Replace with a single Tidelift platform-name/package-name e.g., npm/babel
+community_bridge: # Replace with a single Community Bridge project-name e.g., cloud-foundry
+liberapay: # Replace with a single Liberapay username
+issuehunt: # Replace with a single IssueHunt username
+otechie: # Replace with a single Otechie username
+custom: https://www.paypal.com/cgi-bin/webscr?cmd=_donations&business=VF2K9T23DRY56&lc=US&item_name=DIY%20Multiprotocol&currency_code=EUR&bn=PP%2dDonationsBF%3abtn_donate_SM%2egif%3aNonHosted

.github/workflows/main.yml

@@ -0,0 +1,195 @@
+# Workflow for testing MULTI-Module firmware builds
+
+name: CI
+
+on:
+  # Trigger the workflow on pushes, except those that are tagged (avoids double-testing releases)
+  push:
+    branches:
+    - '**'
+    tags-ignore:
+      - '**'
+    paths:
+    - '.github/workflows/**'
+    - 'buildroot/bin/**'
+    - 'Multiprotocol/**'
+
+  # Trigger the workflow on pull requests to the master branch
+  pull_request:
+    branches:
+      - master
+    paths:
+    - '.github/workflows/**'
+    - 'buildroot/bin/**'
+    - 'Multiprotocol/**'
+
+  # Triggers the workflow on release creation
+  release:
+    types:
+      - created
+
+  # Allows the workflow to be triggered manually from the Actions tab
+  workflow_dispatch:
+
+jobs:
+  build:
+    runs-on: ubuntu-latest
+
+    # Configure the board matrix
+    strategy:
+      fail-fast: false
+      matrix:
+        board: [
+          "multi4in1:avr:multiatmega328p:bootloader=none", 
+          "multi4in1:avr:multiatmega328p:bootloader=optiboot", 
+          "multi4in1:avr:multixmega32d4", 
+          "multi4in1:STM32F1:multi5in1t18int", 
+          "multi4in1:STM32F1:multistm32f103cb:debug_option=none", 
+          "multi4in1:STM32F1:multistm32f103cb:debug_option=native", 
+          "multi4in1:STM32F1:multistm32f103cb:debug_option=ftdi", 
+          "multi4in1:STM32F1:multistm32f103c8:debug_option=none"
+        ]
+
+    # Set the environment variables
+    env:
+      BOARD: ${{ matrix.board }}
+
+    steps:
+      - uses: actions/checkout@v2
+      
+      - name: Install Arduino CLI
+        uses: arduino/setup-arduino-cli@v1.1.1
+      
+      - name: Prepare build environment
+        run: |
+          echo "Github Ref: $GITHUB_REF"
+          echo "Event name: ${{ github.event_name }}"
+          echo "Event action: ${{ github.event.action }}"
+          echo "Tag name: ${{ github.event.release.tag_name }}"
+
+          arduino-cli config init --additional-urls https://raw.githubusercontent.com/pascallanger/DIY-Multiprotocol-TX-Module-Boards/master/package_multi_4in1_board_index.json
+          arduino-cli core update-index
+          
+          if [[ "$BOARD" =~ "multi4in1:avr:" ]]; then
+            arduino-cli core install arduino:avr;
+            arduino-cli core install multi4in1:avr
+          fi
+
+          if [[ "$BOARD" =~ "multi4in1:STM32F1:" ]]; then
+            arduino-cli core install multi4in1:STM32F1
+          fi
+
+          chmod +x ${GITHUB_WORKSPACE}/buildroot/bin/*
+          echo "${GITHUB_WORKSPACE}/buildroot/bin" >> $GITHUB_PATH
+
+          mkdir ./build
+          mkdir ./binaries
+
+      - name: Configure MULTI-Module firmware options
+        run: |
+          # Load the build functions
+          source ./buildroot/bin/buildFunctions;  
+          
+          # Get the version
+          getMultiVersion
+          echo "MULTI_VERSION=$(echo $MULTI_VERSION)" >> $GITHUB_ENV
+
+          # Get all the protocols for this board
+          getAllProtocols
+          echo "A7105_PROTOCOLS=$(echo $A7105_PROTOCOLS)" >> $GITHUB_ENV
+          echo "CC2500_PROTOCOLS=$(echo $CC2500_PROTOCOLS)" >> $GITHUB_ENV
+          echo "CYRF6936_PROTOCOLS=$(echo $CYRF6936_PROTOCOLS)" >> $GITHUB_ENV
+          echo "NRF24L01_PROTOCOLS=$(echo $NRF24L01_PROTOCOLS)" >> $GITHUB_ENV
+          echo "SX1276_PROTOCOLS=$(echo $SX1276_PROTOCOLS)" >> $GITHUB_ENV
+          echo "CCNRF_INO_PROTOCOLS=$(echo $CCNRF_INO_PROTOCOLS)" >> $GITHUB_ENV
+          echo "ALL_PROTOCOLS=$(echo $ALL_PROTOCOLS)" >> $GITHUB_ENV
+
+          # Get all the RF modules for this board
+          getAllRFModules
+          echo "ALL_RFMODULES=$(echo $ALL_RFMODULES)" >> $GITHUB_ENV
+
+          # Disable CHECK_FOR_BOOTLOADER when not needed
+          if [[ "$BOARD" == "multi4in1:avr:multiatmega328p:bootloader=none" ]]; then
+            opt_disable CHECK_FOR_BOOTLOADER;
+          fi
+
+          # Trim the build down for the Atmega328p board
+          if [[ "$BOARD" =~ "multi4in1:avr:multiatmega328p:" ]]; then
+            opt_disable $ALL_PROTOCOLS
+            opt_enable FRSKYX_CC2500_INO AFHDS2A_A7105_INO MJXQ_NRF24L01_INO DSM_CYRF6936_INO;
+          fi
+
+          # Trim the enabled protocols down for the STM32F103CB board with debugging or the STM32F103C8 board in general
+          if [[ "$BOARD" == "multi4in1:STM32F1:multistm32f103cb:debug_option=ftdi" ]] || [[ "$BOARD" == "multi4in1:STM32F1:multistm32f103cb:debug_option=native" ]] || [[ "$BOARD" =~ "multi4in1:STM32F1:multistm32f103c8" ]]; then
+            opt_disable $ALL_PROTOCOLS;
+            opt_enable FRSKYX_CC2500_INO AFHDS2A_A7105_INO MJXQ_NRF24L01_INO DSM_CYRF6936_INO;
+          fi
+
+      - name: Save default firmware configuration
+        run: |
+          cat Multiprotocol/_Config.h
+          cp Multiprotocol/_Config.h ./_Config.h.bak
+
+      - name: Build default configuration
+        run: |
+          # Skip the default build for boards where it's too large now
+          if [[ "$BOARD" == "multi4in1:STM32F1:multistm32f103cb:debug_option=none" ]] || [[ "$BOARD" == "multi4in1:STM32F1:multi5in1t18int" ]]; then
+            printf "Not testing default build for $BOARD.";
+          else
+            source ./buildroot/bin/buildFunctions;
+            buildMulti
+          fi
+
+      - name: Build serial only
+        run: |
+          source ./buildroot/bin/buildFunctions;
+          cp ./_Config.h.bak Multiprotocol/_Config.h
+          opt_disable ENABLE_PPM;
+          buildMulti;
+      
+      - name: Build PPM only
+        run: |
+          source ./buildroot/bin/buildFunctions;
+          cp ./_Config.h.bak Multiprotocol/_Config.h
+          opt_disable ENABLE_SERIAL;
+          buildMulti;
+
+      - name: Build each RF module individually
+        run: |
+          source ./buildroot/bin/buildFunctions;
+          cp ./_Config.h.bak Multiprotocol/_Config.h;
+          buildEachRFModule;
+
+      - name: Build each protocol individually
+        run: |
+          source ./buildroot/bin/buildFunctions;
+          cp ./_Config.h.bak Multiprotocol/_Config.h;
+          buildEachProtocol;
+
+      - name: Build release files
+        run: |
+          source ./buildroot/bin/buildFunctions;
+          cp ./_Config.h.bak Multiprotocol/_Config.h;
+          buildReleaseFiles;
+          ls -al ./binaries;
+
+          NUM_FILES=$(ls -l ./binaries | grep ^- | wc -l);
+          if [ $NUM_FILES -gt 0 ]; then 
+            echo "HAVE_FILES=true" >> $GITHUB_ENV
+          else
+            echo "HAVE_FILES=false" >> $GITHUB_ENV
+          fi
+
+      - name: Deploy files to release
+        if: github.event_name == 'release' && github.event.action == 'created' && env.HAVE_FILES == 'true'
+        uses: AButler/upload-release-assets@v2.0
+        with:
+          files: './binaries/*'
+          repo-token: ${{ secrets.GITHUB_TOKEN }}
+
+      - name: 'Upload Artifacts'
+        if: env.HAVE_FILES == 'true'
+        uses: actions/upload-artifact@v2
+        with:
+          name: multi-test-build
+          path: ./binaries/

.travis.yml

@@ -1,389 +0,0 @@
-os: linux
-dist: bionic
-language: c
-
-env:
-  jobs:
-    - BOARD="multi4in1:avr:multiatmega328p:bootloader=none"
-    - BOARD="multi4in1:avr:multiatmega328p:bootloader=optiboot"
-    - BOARD="multi4in1:avr:multixmega32d4"
-    - BOARD="multi4in1:STM32F1:multi5in1t18int"
-    - BOARD="multi4in1:STM32F1:multistm32f103c:debug_option=none"
-    - BOARD="multi4in1:STM32F1:multistm32f103c:debug_option=native"
-    - BOARD="multi4in1:STM32F1:multistm32f103c:debug_option=ftdi"
-
-notifications:
-  email: false
-
-before_install:
-  # Fetch the tag information for the current branch
-  - git fetch origin --tags
-
-  # Publish the buildroot script folder
-  - chmod +x ${TRAVIS_BUILD_DIR}/buildroot/bin/*
-  - export PATH=${TRAVIS_BUILD_DIR}/buildroot/bin/:${PATH}
-
-  # Helper functions for the builds
-  - buildMulti() { start_fold config_diff; travis_time_start; git diff Multiprotocol/_Config.h; end_fold config_diff; exitcode=0; BUILDCMD="arduino-cli compile -b $BOARD Multiprotocol/Multiprotocol.ino --build-path ${TRAVIS_BUILD_DIR}/build/"; echo $BUILDCMD; $BUILDCMD; if [ $? -ne 0 ]; then exitcode=1; fi; echo; return $exitcode; }
-  - buildProtocol() { exitcode=0; opt_disable $ALL_PROTOCOLS; opt_enable $1; buildMulti; if [ $? -ne 0 ]; then exitcode=1; fi; return $exitcode; }
-  - buildEachProtocol() { exitcodesum=0; for PROTOCOL in $ALL_PROTOCOLS ; do printf "\e[33;1mBuilding $PROTOCOL\e[0m"; buildProtocol $PROTOCOL; if [ $? -ne 0 ]; then exitcodesum=$((exitcodesum + 1)); fi; done; return $exitcodesum; }
-  - buildRFModule() { exitcode=0; opt_disable $ALL_RFMODULES; opt_enable $1; buildMulti; if [ $? -ne 0 ]; then exitcode=1; fi; return $exitcode; }
-  - buildEachRFModule() { exitcodesum=0; for RFMODULE in $ALL_RFMODULES; do printf "\e[33;1mBuilding $RFMODULE\e[0m"; buildRFModule $RFMODULE; if [ $? -ne 0 ]; then exitcodesum=$((exitcodesum + 1)); fi; done; return $exitcodesum; }
-  - buildDefault() { exitcode=0; printf "\n\e[33;1mBuilding default configuration\e[0m\n"; buildMulti; if [ $? -ne 0 ]; then exitcode=1; fi; return $exitcode; }
-  - buildSerialOnly() { exitcode=0; printf "\n\e[33;1mBuilding serial mode only\e[0m\n"; opt_disable ENABLE_PPM; opt_enable ENABLE_SERIAL; buildMulti; if [ $? -ne 0 ]; then exitcode=1; fi; return $exitcode; }
-  - buildPPMOnly() { exitcode=0; printf "\n\e[33;1mBuilding PPM mode only\e[0m\n"; opt_enable ENABLE_PPM; opt_disable ENABLE_SERIAL; buildMulti; if [ $? -ne 0 ]; then exitcode=1; fi; return $exitcode; }
-
-  # Function to build the release files - dependent on board type
-  - if [[ "$BOARD" == "multi4in1:avr:multixmega32d4" ]]; then
-      buildReleaseFiles(){
-        exitcode=0;
-        printf "\n\e[33;1mBuilding multi-orangerx-aetr-green-inv-v$MULTI_VERSION.bin\e[0m";
-        opt_enable $ALL_PROTOCOLS;
-        opt_disable ORANGE_TX_BLUE;
-        buildMulti;
-        exitcode=$((exitcode+$?));
-        mv build/Multiprotocol.ino.bin ./binaries/multi-orangerx-aetr-green-inv-v$MULTI_VERSION.bin;
-        printf "\n\e[33;1mBuilding multi-orangerx-aetr-blue-inv-v$MULTI_VERSION.bin\e[0m";
-        opt_enable ORANGE_TX_BLUE;
-        buildMulti;
-        exitcode=$((exitcode+$?));
-        mv build/Multiprotocol.ino.bin ./binaries/multi-orangerx-aetr-blue-inv-v$MULTI_VERSION.bin;
-        cp Multiprotocol/Multi.txt ./binaries/Multi.txt;
-        zip -j ./binaries/MultiLuaScripts.zip Lua_scripts/*;
-        return $exitcode; };
-    elif [[ "$BOARD" == "multi4in1:avr:multiatmega328p:bootloader=none" ]]; then
-      buildReleaseFiles(){
-        printf "\n\e[33;1mBuilding multi-avr-usbasp-aetr-A7105-inv-v$MULTI_VERSION.bin\e[0m";
-        exitcode=0;
-        opt_disable CHECK_FOR_BOOTLOADER;
-        opt_disable $ALL_PROTOCOLS;
-        opt_enable $A7105_PROTOCOLS;
-        buildMulti;
-        exitcode=$((exitcode+$?));
-        mv build/Multiprotocol.ino.bin ./binaries/multi-avr-usbasp-aetr-A7105-inv-v$MULTI_VERSION.bin;
-        printf "\n\e[33;1mBuilding multi-avr-usbasp-aetr-CC2500-inv-v$MULTI_VERSION.bin\e[0m";
-        opt_disable $ALL_PROTOCOLS;
-        opt_enable $CC2500_PROTOCOLS;
-        opt_disable HITEC_CC2500_INO REDPINE_CC2500_INO SKYARTEC_CC2500_INO SCANNER_CC2500_INO;
-        buildMulti;
-        mv build/Multiprotocol.ino.bin ./binaries/multi-avr-usbasp-aetr-CC2500-inv-v$MULTI_VERSION.bin;
-        printf "\n\e[33;1mBuilding multi-avr-usbasp-aetr-CYRF6936-inv-v$MULTI_VERSION.bin\e[0m";
-        opt_disable $ALL_PROTOCOLS;
-        opt_enable $CYRF6936_PROTOCOLS;
-        buildMulti;
-        exitcode=$((exitcode+$?));
-        mv build/Multiprotocol.ino.bin ./binaries/multi-avr-usbasp-aetr-CYRF6936-inv-v$MULTI_VERSION.bin; 
-        return $exitcode; };
-    elif [[ "$BOARD" == "multi4in1:avr:multiatmega328p:bootloader=optiboot" ]]; then
-      buildReleaseFiles(){
-        printf "\n\e[33;1mBuilding multi-avr-txflash-aetr-A7105-inv-v$MULTI_VERSION.bin\e[0m";
-        exitcode=0;
-        opt_enable CHECK_FOR_BOOTLOADER;
-        opt_disable $ALL_PROTOCOLS;
-        opt_enable $A7105_PROTOCOLS;
-        buildMulti;
-        exitcode=$((exitcode+$?));
-        mv build/Multiprotocol.ino.bin ./binaries/multi-avr-txflash-aetr-A7105-inv-v$MULTI_VERSION.bin;
-        printf "\n\e[33;1mBuilding multi-avr-txflash-aetr-CC2500-inv-v$MULTI_VERSION.bin\e[0m";
-        opt_disable $ALL_PROTOCOLS;
-        opt_enable $CC2500_PROTOCOLS;
-        opt_disable HITEC_CC2500_INO REDPINE_CC2500_INO SKYARTEC_CC2500_INO SCANNER_CC2500_INO;
-        buildMulti;
-        exitcode=$((exitcode+$?));
-        mv build/Multiprotocol.ino.bin ./binaries/multi-avr-txflash-aetr-CC2500-inv-v$MULTI_VERSION.bin;
-        printf "\n\e[33;1mBuilding multi-avr-txflash-aetr-CYRF6936-inv-v$MULTI_VERSION.bin\e[0m";
-        opt_disable $ALL_PROTOCOLS;
-        opt_enable $CYRF6936_PROTOCOLS;
-        buildMulti;
-        exitcode=$((exitcode+$?));
-        mv build/Multiprotocol.ino.bin ./binaries/multi-avr-txflash-aetr-CYRF6936-inv-v$MULTI_VERSION.bin; 
-        return $exitcode; };
-    elif [[ "$BOARD" == "multi4in1:STM32F1:multistm32f103c:debug_option=none" ]]; then
-      buildReleaseFiles(){
-        printf "\n\e[33;1mBuilding multi-stm-erskytx-aetr-inv-v$MULTI_VERSION.bin\e[0m";
-        exitcode=0;
-        opt_enable CHECK_FOR_BOOTLOADER;
-        opt_enable $ALL_PROTOCOLS;
-        opt_enable MULTI_STATUS;
-        opt_disable MULTI_TELEMETRY;
-        buildMulti;
-        exitcode=$((exitcode+$?));
-        mv build/Multiprotocol.ino.bin ./binaries/multi-stm-erskytx-aetr-inv-v$MULTI_VERSION.bin;
-        printf "\n\e[33;1mBuilding multi-stm-erskytx-taer-inv-v$MULTI_VERSION.bin\e[0m";
-        opt_replace AETR TAER;
-        buildMulti;
-        exitcode=$((exitcode+$?));
-        mv build/Multiprotocol.ino.bin ./binaries/multi-stm-erskytx-taer-inv-v$MULTI_VERSION.bin;
-        printf "\n\e[33;1mBuilding multi-stm-erskytx-reta-inv-v$MULTI_VERSION.bin\e[0m";
-        opt_replace TAER RETA;
-        buildMulti;
-        exitcode=$((exitcode+$?));
-        mv build/Multiprotocol.ino.bin ./binaries/multi-stm-erskytx-reta-inv-v$MULTI_VERSION.bin;
-        printf "\n\e[33;1mBuilding multi-stm-erskytx-aetr-noinv-v$MULTI_VERSION.bin\e[0m";
-        opt_replace RETA AETR;
-        opt_disable INVERT_TELEMETRY;
-        buildMulti;
-        exitcode=$((exitcode+$?));
-        mv build/Multiprotocol.ino.bin ./binaries/multi-stm-erskytx-aetr-noinv-v$MULTI_VERSION.bin;
-        printf "\n\e[33;1mBuilding multi-stm-erskytx-taer-noinv-v$MULTI_VERSION.bin\e[0m";
-        opt_replace AETR TAER;
-        buildMulti;
-        exitcode=$((exitcode+$?));
-        mv build/Multiprotocol.ino.bin ./binaries/multi-stm-erskytx-taer-noinv-v$MULTI_VERSION.bin;
-        printf "\n\e[33;1mBuilding multi-stm-erskytx-reta-noinv-v$MULTI_VERSION.bin\e[0m";
-        opt_replace TAER RETA;
-        buildMulti;
-        exitcode=$((exitcode+$?));
-        mv build/Multiprotocol.ino.bin ./binaries/multi-stm-erskytx-reta-noinv-v$MULTI_VERSION.bin;
-        printf "\n\e[33;1mBuilding multi-stm-opentx-aetr-inv-v$MULTI_VERSION.bin\e[0m";
-        opt_replace RETA AETR;
-        opt_disable MULTI_STATUS;
-        opt_enable MULTI_TELEMETRY;
-        opt_enable INVERT_TELEMETRY;
-        buildMulti;
-        exitcode=$((exitcode+$?));
-        mv build/Multiprotocol.ino.bin ./binaries/multi-stm-opentx-aetr-inv-v$MULTI_VERSION.bin;
-        printf "\n\e[33;1mBuilding multi-stm-opentx-taer-inv-v$MULTI_VERSION.bin\e[0m";
-        opt_replace AETR TAER;
-        buildMulti;
-        exitcode=$((exitcode+$?));
-        mv build/Multiprotocol.ino.bin ./binaries/multi-stm-opentx-taer-inv-v$MULTI_VERSION.bin;
-        printf "\n\e[33;1mBuilding multi-stm-opentx-reta-inv-v$MULTI_VERSION.bin\e[0m";
-        opt_replace TAER RETA;
-        buildMulti;
-        exitcode=$((exitcode+$?));
-        mv build/Multiprotocol.ino.bin ./binaries/multi-stm-opentx-reta-inv-v$MULTI_VERSION.bin;
-        printf "\n\e[33;1mBuilding multi-stm-opentx-aetr-noinv-v$MULTI_VERSION.bin\e[0m";
-        opt_replace RETA AETR;
-        opt_disable INVERT_TELEMETRY;
-        buildMulti;
-        exitcode=$((exitcode+$?));
-        mv build/Multiprotocol.ino.bin ./binaries/multi-stm-opentx-aetr-noinv-v$MULTI_VERSION.bin;
-        printf "\n\e[33;1mBuilding multi-stm-opentx-taer-noinv-v$MULTI_VERSION.bin\e[0m";
-        opt_replace AETR TAER;
-        buildMulti;
-        exitcode=$((exitcode+$?));
-        mv build/Multiprotocol.ino.bin ./binaries/multi-stm-opentx-taer-noinv-v$MULTI_VERSION.bin;
-        printf "\n\e[33;1mBuilding multi-stm-opentx-reta-noinv-v$MULTI_VERSION.bin\e[0m";
-        opt_replace TAER RETA;
-        buildMulti;
-        exitcode=$((exitcode+$?));
-        mv build/Multiprotocol.ino.bin ./binaries/multi-stm-opentx-reta-noinv-v$MULTI_VERSION.bin;
-        printf "\n\e[33;1mBuilding multi-stm-ppm-aetr-noinv-v$MULTI_VERSION.bin\e[0m";
-        opt_replace RETA AETR;
-        opt_disable MULTI_STATUS;
-        opt_disable MULTI_TELEMETRY;
-        opt_set NBR_BANKS 5;
-        buildMulti;
-        exitcode=$((exitcode+$?));
-        mv build/Multiprotocol.ino.bin ./binaries/multi-stm-ppm-aetr-noinv-v$MULTI_VERSION.bin;
-        printf "\n\e[33;1mBuilding multi-stm-ppm-taer-noinv-v$MULTI_VERSION.bin\e[0m";
-        opt_replace AETR TAER;
-        buildMulti;
-        exitcode=$((exitcode+$?));
-        mv build/Multiprotocol.ino.bin ./binaries/multi-stm-ppm-taer-noinv-v$MULTI_VERSION.bin;
-        printf "\n\e[33;1mBuilding multi-stm-ppm-reta-noinv-v$MULTI_VERSION.bin\e[0m";
-        opt_replace TAER RETA;
-        buildMulti;
-        exitcode=$((exitcode+$?));
-        mv build/Multiprotocol.ino.bin ./binaries/multi-stm-ppm-reta-noinv-v$MULTI_VERSION.bin; 
-        return $exitcode; };
-    elif [[ "$BOARD" == "multi4in1:STM32F1:multistm32f103c:debug_option=native" ]]; then
-      buildReleaseFiles(){
-        printf "\n\e[33;1mBuilding multi-stm-erskytx-xn297dump-inv-usbdebug-v$MULTI_VERSION.bin\e[0m";
-        exitcode=0;
-        opt_enable CHECK_FOR_BOOTLOADER;
-        opt_disable $ALL_PROTOCOLS;
-        opt_add XN297DUMP_NRF24L01_INO;
-        opt_enable MULTI_STATUS;
-        opt_disable MULTI_TELEMETRY;
-        opt_enable INVERT_TELEMETRY;
-        buildMulti;
-        exitcode=$((exitcode+$?));
-        mv build/Multiprotocol.ino.bin ./binaries/multi-stm-erskytx-xn297dump-inv-usbdebug-v$MULTI_VERSION.bin;
-        printf "\n\e[33;1mBuilding multi-stm-opentx-xn297dump-inv-usbdebug-v$MULTI_VERSION.bin\e[0m";
-        opt_disable $ALL_PROTOCOLS;
-        opt_disable MULTI_STATUS;
-        opt_enable MULTI_TELEMETRY;
-        opt_enable INVERT_TELEMETRY;
-        buildMulti;
-        exitcode=$((exitcode+$?));
-        mv build/Multiprotocol.ino.bin ./binaries/multi-stm-opentx-xn297dump-inv-usbdebug-v$MULTI_VERSION.bin;
-        return $exitcode; };
-    elif [[ "$BOARD" == "multi4in1:STM32F1:multistm32f103c:debug_option=ftdi" ]]; then
-      buildReleaseFiles(){
-        printf "\n\e[33;1mBuilding multi-stm-erskytx-xn297dump-inv-ftdidebug-v$MULTI_VERSION.bin\e[0m";
-        exitcode=0;
-        opt_enable CHECK_FOR_BOOTLOADER;
-        opt_disable $ALL_PROTOCOLS;
-        opt_add XN297DUMP_NRF24L01_INO;
-        opt_enable MULTI_STATUS;
-        opt_disable MULTI_TELEMETRY;
-        opt_enable INVERT_TELEMETRY;
-        buildMulti;
-        exitcode=$((exitcode+$?));
-        mv build/Multiprotocol.ino.bin ./binaries/multi-stm-erskytx-xn297dump-inv-ftdidebug-v$MULTI_VERSION.bin;
-        printf "\n\e[33;1mBuilding multi-stm-opentx-xn297dump-inv-ftdidebug-v$MULTI_VERSION.bin\e[0m";
-        opt_disable $ALL_PROTOCOLS;
-        opt_disable MULTI_STATUS;
-        opt_enable MULTI_TELEMETRY;
-        opt_enable INVERT_TELEMETRY;
-        buildMulti;
-        exitcode=$((exitcode+$?));
-        mv build/Multiprotocol.ino.bin ./binaries/multi-stm-opentx-xn297dump-inv-ftdidebug-v$MULTI_VERSION.bin;
-        return $exitcode; };
-    elif [[ "$BOARD" == "multi4in1:STM32F1:multi5in1t18int" ]]; then
-      buildReleaseFiles(){
-        printf "\n\e[33;1mBuilding multi-t18int-opentx-aetr-noinv-v$MULTI_VERSION.bin\e[0m";
-        opt_disable INVERT_TELEMETRY;
-        exitcode=0;
-        buildMulti;
-        exitcode=$((exitcode+$?));
-        mv build/Multiprotocol.ino.bin ./binaries/multi-t18int-opentx-aetr-noinv-v$MULTI_VERSION.bin;
-        printf "\n\e[33;1mBuilding multi-t18int-opentx-taer-noinv-v$MULTI_VERSION.bin\e[0m";
-        opt_replace AETR TAER;
-        exitcode=0;
-        buildMulti;
-        exitcode=$((exitcode+$?));
-        mv build/Multiprotocol.ino.bin ./binaries/multi-t18int-opentx-taer-noinv-v$MULTI_VERSION.bin;
-        printf "\n\e[33;1mBuilding multi-t18int-opentx-reta-noinv-v$MULTI_VERSION.bin\e[0m";
-        opt_replace TAER RETA;
-        exitcode=0;
-        buildMulti;
-        exitcode=$((exitcode+$?));
-        mv build/Multiprotocol.ino.bin ./binaries/multi-t18int-opentx-reta-noinv-v$MULTI_VERSION.bin;
-        return $exitcode; };
-    else
-      buildReleaseFiles() { echo "No release files for this board."; };
-    fi
-
-install:
-  # Install Arduino CLI
-  - mkdir ~/arduino-cli
-  - curl -fsSL https://raw.githubusercontent.com/arduino/arduino-cli/master/install.sh | BINDIR=~/arduino-cli sh;
-  - export PATH=$PATH:$HOME/arduino-cli
-
-  # Update the board url and package index
-  - arduino-cli core update-index --additional-urls https://raw.githubusercontent.com/pascallanger/DIY-Multiprotocol-TX-Module-Boards/master/package_multi_4in1_board_index.json
-
-  # Install the STM32 board if needed
-  - if [[ "$BOARD" =~ "multi4in1:STM32F1:" ]]; then
-      arduino-cli core install multi4in1:STM32F1 --additional-urls https://raw.githubusercontent.com/pascallanger/DIY-Multiprotocol-TX-Module-Boards/master/package_multi_4in1_board_index.json;
-    fi
-
-  # Install the AVR board if needed
-  - if [[ "$BOARD" =~ "multi4in1:avr:" ]]; then
-      arduino-cli core install arduino:avr;
-      arduino-cli core install multi4in1:avr --additional-urls https://raw.githubusercontent.com/pascallanger/DIY-Multiprotocol-TX-Module-Boards/master/package_multi_4in1_board_index.json;
-    fi
-
-before_script:
-  # Change current working directory to the build dir
-  - cd ${TRAVIS_BUILD_DIR}
-
-  # Create somwhere to put the exported binaries
-  - mkdir ./binaries
-
-  # Log the initial Multi config 
-  - cat Multiprotocol/_Config.h
-
-  # Back up the configuration
-  - cp Multiprotocol/_Config.h ./_Config.h.bak
-
-  # Get the firmware version number from the source
-  - MAJOR_VERSION=$(grep "VERSION_MAJOR" "Multiprotocol/Multiprotocol.h" | awk -v N=3 '{gsub(/\r/,""); print $N}')
-  - MINOR_VERSION=$(grep "VERSION_MINOR" "Multiprotocol/Multiprotocol.h" | awk -v N=3 '{gsub(/\r/,""); print $N}')
-  - REVISION_VERSION=$(grep "VERSION_REVISION" "Multiprotocol//Multiprotocol.h" | awk -v N=3 '{gsub(/\r/,""); print $N}')
-  - PATCH_VERSION=$(grep "VERSION_PATCH" "Multiprotocol//Multiprotocol.h" | awk -v N=3 '{gsub(/\r/,""); print $N}')
-  - MULTI_VERSION=$MAJOR_VERSION.$MINOR_VERSION.$REVISION_VERSION.$PATCH_VERSION
-
-  # Derive the Multi protocols from the Multi source
-  - A7105_PROTOCOLS=$(sed -n 's/[\/\/]*[[:blank:]]*#define[[:blank:]]*\([[:alnum:]_]*_A7105_INO\)\(.*\)/\1/p' Multiprotocol/_Config.h)
-  - CC2500_PROTOCOLS=$(sed -n 's/[\/\/]*[[:blank:]]*#define[[:blank:]]*\([[:alnum:]_]*_CC2500_INO\)\(.*\)/\1/p' Multiprotocol/_Config.h)
-  - CYRF6936_PROTOCOLS=$(sed -n 's/[\/\/]*[[:blank:]]*#define[[:blank:]]*\([[:alnum:]_]*_CYRF6936_INO\)\(.*\)/\1/p' Multiprotocol/_Config.h)
-  - NRF24L01_PROTOCOLS=$(sed -n 's/[\/\/]*[[:blank:]]*#define[[:blank:]]*\([[:alnum:]_]*_NRF24L01_INO\)\(.*\)/\1/p' Multiprotocol/_Config.h)
-  - SX1276_PROTOCOLS=$(sed -n 's/[\/\/]*[[:blank:]]*#define[[:blank:]]*\([[:alnum:]_]*_SX1276_INO\)\(.*\)/\1/p' Multiprotocol/_Config.h)
-
-  # Get the full set of protocols for each board
-  - if [[ "$BOARD" =~ "multi4in1:avr:multixmega32d4" ]]; then
-      ALL_PROTOCOLS=$(echo $CYRF6936_PROTOCOLS);
-    elif [[ "$BOARD" =~ "multi4in1:avr:multiatmega328p:" ]]; then
-      ALL_PROTOCOLS=$(echo $A7105_PROTOCOLS $CC2500_PROTOCOLS $CYRF6936_PROTOCOLS $NRF24L01_PROTOCOLS);
-    elif [[ "$BOARD" =~ "multi4in1:STM32F1:" ]]; then
-      ALL_PROTOCOLS=$(echo $A7105_PROTOCOLS $CC2500_PROTOCOLS $CYRF6936_PROTOCOLS $NRF24L01_PROTOCOLS $SX1276_PROTOCOLS);
-    fi
-  - echo $ALL_PROTOCOLS
-
-  # Declare all the installed modules
-  - if [[ "$BOARD" =~ "multi4in1:STM32F1:" ]]; then
-      ALL_RFMODULES=$(echo A7105_INSTALLED CYRF6936_INSTALLED CC2500_INSTALLED NRF24L01_INSTALLED SX1276_INSTALLED);
-    else
-      ALL_RFMODULES=$(echo A7105_INSTALLED CYRF6936_INSTALLED CC2500_INSTALLED NRF24L01_INSTALLED);
-    fi
-
-  # Disable CHECK_FOR_BOOTLOADER when not needed
-  - if [[ "$BOARD" == "multi4in1:avr:multiatmega328p:bootloader=none" ]]; then
-      opt_disable CHECK_FOR_BOOTLOADER;
-    fi
-
-  # Trim the enabled protocols down for the STM32 board with debugging
-  - if [[ "$BOARD" == "multi4in1:STM32F1:multistm32f103c:debug_option=ftdi" ]] || [[ "$BOARD" == "multi4in1:STM32F1:multistm32f103c:debug_option=native" ]]; then
-      opt_disable $ALL_PROTOCOLS;
-      opt_enable FRSKYX_CC2500_INO AFHDS2A_A7105_INO MJXQ_NRF24L01_INO DSM_CYRF6936_INO;
-    fi
-
-  # Trim the enabled protocols down for the Atmega328p board
-  - if [[ "$BOARD" =~ "multi4in1:avr:multiatmega328p:" ]]; then
-      opt_disable $ALL_PROTOCOLS;
-      opt_enable FRSKYX_CC2500_INO AFHDS2A_A7105_INO MJXQ_NRF24L01_INO DSM_CYRF6936_INO;
-    fi
-
-  # Useful Travis functions
-  - export -f travis_fold
-  - export -f travis_nanoseconds
-  - export -f travis_time_start
-  - export -f travis_time_finish
-  - start_fold() { echo -e "travis_fold:start:$1"; }
-  - end_fold() { echo -e "\ntravis_fold:end:$1\r"; }
-
-script:
-  # Build with default configuration - all protocols are enabled for STM32; a subset of protocols for Atmega or STM32 debugging
-  - buildDefault
-
-  # Serial only
-  - buildSerialOnly
-
-  # PPM only
-  - buildPPMOnly
-
-  # Re-enable PPM and serial
-  - opt_enable ENABLE_SERIAL
-  - opt_enable ENABLE_PPM
-
-  # Build for each RF module individually
-  - buildEachRFModule
-
-  # Restore the default configuration
-  - cp ./_Config.h.bak Multiprotocol/_Config.h
-
-  # Build each protocol individually
-  - buildEachProtocol
-
-  # Restore the default configuration
-  - cp ./_Config.h.bak Multiprotocol/_Config.h
-
-  # Restore the default configuration
-  - cp ./_Config.h.bak Multiprotocol/_Config.h
-
-  # Builds the files for a release - always built, but only copied to Github if the test is tagged as a release
-  - buildReleaseFiles
-
-deploy:
-  provider: releases
-  token:
-    secure: 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
-  skip_cleanup: true
-  file_glob: true
-  file: binaries/*
-  on:
-    tags: true

BootLoaders/Boards/Windows/install_drivers.bat

@@ -1,11 +1,11 @@
 @echo off
 
-echo Installing Maple DFU driver...
-"%~dp0wdi-simple" --vid 0x1EAF --pid 0x0003 --type 1 --name "Maple DFU" --dest "%~dp0maple-dfu"
+echo Installing MULTI-Module DFU Bootloader Driver...
+"%~dp0wdi-simple" --vid 0x1EAF --pid 0x0003 --type 2 --name "MULTI-Module DFU Bootloader" --dest "%~dp0MULTI-DFU-Bootloader" -b
 echo.
 
-echo Installing Maple Serial driver...
-"%~dp0wdi-simple" --vid 0x1EAF --pid 0x0004 --type 3 --name "Maple Serial" --dest "%~dp0maple-serial"
+echo Installing MULTI-Module USB Serial Driver...
+"%~dp0wdi-simple" --vid 0x1EAF --pid 0x0004 --type 3 --name "MULTI-Module USB Serial" --dest "%~dp0MULTI-USB-Serial" -b
 echo.
 
 pause

BootLoaders/package_multi_4in1_board_index.json

@@ -170,6 +170,24 @@
         ],
         "toolsDependencies": []
       },
+      {
+        "name": "MULTI-Module AVR Boards",
+        "architecture": "avr",
+        "version": "1.1.1",
+        "category": "Contributed",
+        "help": {
+          "online": "https://github.com/pascallanger/DIY-Multiprotocol-TX-Module"
+        },
+        "url": "https://github.com/pascallanger/DIY-Multiprotocol-TX-Module-Boards/raw/master/archives/package_multi_4in1_avr_board_v1.1.1.tar.gz",
+        "archiveFileName": "package_multi_4in1_avr_board_v1.1.1.tar.gz",
+        "checksum": "SHA-256:02158258b4dbaca61bedbb6933336200d13b02ad0db981e2dda253682c482e99",
+        "size": "324512",
+        "boards": [
+          {"name": "Multi 4-in-1 (Atmega328p, 3.3V, 16MHz)"},
+          {"name": "Multi 4-in-1 (OrangeRX)"}
+        ],
+        "toolsDependencies": []
+      },
       {
         "name": "Multi 4-in-1 STM32 Board",
         "architecture": "STM32F1",
@@ -527,6 +545,95 @@
           "version": "4.8.3-2014q1"
         }]
       },
+      {
+        "name": "Multi X-in-1 STM32 Boards",
+        "architecture": "STM32F1",
+        "version": "1.1.8",
+        "category": "Contributed",
+        "help": {
+          "online": "https://github.com/pascallanger/DIY-Multiprotocol-TX-Module"
+        },
+        "url": "https://github.com/pascallanger/DIY-Multiprotocol-TX-Module-Boards/raw/master/archives/package_multi_4in1_stm32_board_v1.1.8.tar.gz",
+        "archiveFileName": "package_multi_4in1_stm32_board_v1.1.8.tar.gz",
+        "checksum": "SHA-256:e9ed8055ebf72abf37e60e1b8d1c6ee5472132ea7c0a3c4a63fbb8442613e4c2",
+        "size": "7481800",
+        "boards": [
+          {"name": "Multi 4-in-1 (STM32F103C)"},
+          {"name": "Multi 5-in-1 (Jumper T18 Internal)"}
+        ],
+        "toolsDependencies": [{
+          "packager": "arduino",
+          "name": "arm-none-eabi-gcc",
+          "version": "4.8.3-2014q1"
+        }]
+      },
+      {
+        "name": "Multi X-in-1 STM32 Boards",
+        "architecture": "STM32F1",
+        "version": "1.2.0",
+        "category": "Contributed",
+        "help": {
+          "online": "https://github.com/pascallanger/DIY-Multiprotocol-TX-Module"
+        },
+        "url": "https://github.com/pascallanger/DIY-Multiprotocol-TX-Module-Boards/raw/master/archives/package_multi_4in1_stm32_board_v1.2.0.tar.gz",
+        "archiveFileName": "package_multi_4in1_stm32_board_v1.2.0.tar.gz",
+        "checksum": "SHA-256:754f08ca2a553701cc9112b645c079b6041107f1bf863648305e560c136a6ac5",
+        "size": "7496214",
+        "boards": [
+          {"name": "Multi 4-in-1 (STM32F103C)"},
+          {"name": "Multi 5-in-1 (Jumper T18 Internal)"}
+        ],
+        "toolsDependencies": [{
+          "packager": "arduino",
+          "name": "arm-none-eabi-gcc",
+          "version": "4.8.3-2014q1"
+        }]
+      },
+      {
+        "name": "Multi X-in-1 STM32 Boards",
+        "architecture": "STM32F1",
+        "version": "1.2.1",
+        "category": "Contributed",
+        "help": {
+          "online": "https://github.com/pascallanger/DIY-Multiprotocol-TX-Module"
+        },
+        "url": "https://github.com/pascallanger/DIY-Multiprotocol-TX-Module-Boards/raw/master/archives/package_multi_4in1_stm32_board_v1.2.1.tar.gz",
+        "archiveFileName": "package_multi_4in1_stm32_board_v1.2.1.tar.gz",
+        "checksum": "SHA-256:c66d34afadc5b21e9e28c4d477fa03a6d55db0b74b59ff2dcb07b4d6ef06da1a",
+        "size": "7496448",
+        "boards": [
+          {"name": "Multi 4-in-1 (STM32F103C)"},
+          {"name": "Multi 5-in-1 (Jumper T18 Internal)"}
+        ],
+        "toolsDependencies": [{
+          "packager": "arduino",
+          "name": "arm-none-eabi-gcc",
+          "version": "4.8.3-2014q1"
+        }]
+      },
+      {
+        "name": "MULTI-Module STM32 Boards",
+        "architecture": "STM32F1",
+        "version": "1.2.2",
+        "category": "Contributed",
+        "help": {
+          "online": "https://github.com/pascallanger/DIY-Multiprotocol-TX-Module"
+        },
+        "url": "https://github.com/pascallanger/DIY-Multiprotocol-TX-Module-Boards/raw/master/archives/package_multi_4in1_stm32_board_v1.2.2.tar.gz",
+        "archiveFileName": "package_multi_4in1_stm32_board_v1.2.2.tar.gz",
+        "checksum": "SHA-256:0fe4a8899438bbc31dc37714acca13968e43d75a47e59143343d83b634d2e47d",
+        "size": "7485662",
+        "boards": [
+          {"name": "Multi X-in-1 STM32F103CB (128KB)"},
+          {"name": "Multi X-in-1 STM32F103C8 (64KB)"},
+          {"name": "Multi 5-in-1 (Jumper T18 Internal)"}
+        ],
+        "toolsDependencies": [{
+          "packager": "arduino",
+          "name": "arm-none-eabi-gcc",
+          "version": "4.8.3-2014q1"
+        }]
+      },
       {
         "name": "Multi 4-in-1 OrangeRX Board - DEPRECATED, USE MULTI 4-IN-1 AVR BOARDS PACKAGE INSTEAD",
         "architecture": "orangerx",

Lua_scripts/DSM FwdPrg.lua

@@ -0,0 +1,601 @@
+local toolName = "TNS|DSM Forward Programming|TNE"
+
+---- #########################################################################
+---- #                                                                       #
+---- # Copyright (C) OpenTX                                                  #
+-----#                                                                       #
+---- # License GPLv2: http://www.gnu.org/licenses/gpl-2.0.html               #
+---- #                                                                       #
+---- # This program is free software; you can redistribute it and/or modify  #
+---- # it under the terms of the GNU General Public License version 2 as     #
+---- # published by the Free Software Foundation.                            #
+---- #                                                                       #
+---- # This program is distributed in the hope that it will be useful        #
+---- # but WITHOUT ANY WARRANTY; without even the implied warranty of        #
+---- # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the         #
+---- # GNU General Public License for more details.                          #
+---- #                                                                       #
+---- #########################################################################
+
+
+--###############################################################################
+-- Multi buffer for DSM description
+-- Multi_Buffer[0..2]=="DSM" -> Lua script is running
+-- Multi_Buffer[3]==0x70+len -> TX to RX data ready to be sent
+-- Multi_Buffer[4..9]=6 bytes of TX to RX data
+-- Multi_Buffer[10..25]=16 bytes of RX to TX data
+--
+-- To start operation:
+--   Write 0x00 at address 3
+--   Write 0x00 at address 10
+--   Write "DSM" at address 0..2
+--###############################################################################
+
+local RX_VERSION, WAIT_CMD, MENU_TITLE, MENU_LINES, MENU_VALUES, VALUE_CHANGING, VALUE_CHANGING_WAIT, VALUE_CHANGED = 0, 1, 2, 3, 4, 5, 6, 7
+local MENU, LIST_MENU_NOCHANGING, LIST_MENU2, PERCENTAGE_VALUE = 0x1C, 0x6C, 0x4C, 0xC0
+local Phase = RX_VERSION
+local Waiting_RX = 0
+local Text = {}
+local Retry=100
+local Blink = 0
+local Value_Changed=0
+
+local Menu = { Cur=nil, Id=nil, Title="", Prev=nil, PrevId=nil, Next=nil, NextId=nil, Back=nil, BackId=nil, CurLine=nil, SelLine=nil, EditLine=nil }
+local Line = {}
+local RX = { Name="", Version="" }
+
+local function conv_int16(number)
+  if number >= 0x8000 then
+    return number - 0x10000
+  end
+  return number
+end
+
+local function Get_Text(index)
+  out = Text[index]
+  if out == nil then -- unknown...
+    out = "Unknown_"..string.format("%X",index)
+  end
+  return out
+end
+
+local function DSM_Release()
+  multiBuffer( 0, 0 )
+end
+
+local function DSM_Send(...)
+  local arg = {...}
+  for i = 1 , #arg do
+    multiBuffer( 3+i, arg[i])
+  end
+  multiBuffer( 3, 0x70+#arg)
+end
+
+local function Value_Add(dir)
+  local line=Line[Menu.SelLine]
+  Speed = getRotEncSpeed()
+  if Speed == ROTENC_MIDSPEED then
+    line.Val = line.Val + (5 * dir)
+  elseif Speed == ROTENC_HIGHSPEED then
+    line.Val = line.Val + (15 * dir)
+  else
+    line.Val = line.Val + dir
+  end
+  if line.Val > line.Max then
+    line.Val = line.Max
+  elseif line.Val < line.Min then
+    line.Val = line.Min
+  end
+  if Line[Menu.SelLine].Type ~= LIST_MENU_NOCHANGING then
+    Phase = VALUE_CHANGING
+    Waiting_RX = 0
+  end
+end
+
+local function DSM_Menu(event)
+  local Speed = 0
+  if event == EVT_VIRTUAL_NEXT then
+    if Menu.EditLine == nil then
+      -- not changing a value
+      if Menu.SelLine ~= nil then
+        if Menu.SelLine < 7 then
+          local num = Menu.SelLine
+          for i = Menu.SelLine + 1, 6, 1 do
+            if Line[i].Type ~= nil and Line[i].Next ~= nil then
+              Menu.SelLine=i
+              break
+            end
+          end
+          if num == Menu.SelLine then
+            if Menu.Next ~= 0 then -- Next
+              Menu.SelLine = 7
+            elseif Menu.Prev ~= 0 then -- Prev
+                Menu.SelLine = 8
+            end
+          end
+        elseif Menu.Prev ~= 0 then -- Prev
+            Menu.SelLine = 8
+        end
+      end
+    else -- need to inc the value
+      Value_Add(1)
+    end
+  elseif event == EVT_VIRTUAL_PREV then
+    if Menu.EditLine == nil then
+      if Menu.SelLine ~= nil then
+        if Menu.SelLine == 8 and Menu.Next ~= 0 then
+          Menu.SelLine = 7
+        elseif Menu.SelLine > 0 then
+          if Menu.SelLine > 6 then
+            Menu.SelLine = 7
+          end
+          local num = Menu.SelLine
+          for i = Menu.SelLine-1, 0, -1 do
+            if Line[i].Type ~= nil and Line[i].Next ~= nil then
+              Menu.SelLine=i
+              break
+            end
+          end
+          if num == Menu.SelLine then -- Back
+            Menu.SelLine = -1
+          end
+        else
+          Menu.SelLine = -1 -- Back
+        end
+      end
+    else -- need to dec the value
+      Value_Add(-1)
+    end
+  elseif event == EVT_VIRTUAL_ENTER then
+    if Menu.SelLine == -1 then -- Back
+        Menu.Cur = Menu.Back
+        Menu.Id = Menu.BackId
+        Menu.SelLine = 0
+        Phase = MENU_TITLE
+        Waiting_RX = 0
+    elseif Menu.SelLine == 7 then -- Next
+        Menu.Cur = Menu.Next
+        Menu.Id = Menu.NextId
+        Menu.SelLine = 0
+        Phase = MENU_TITLE
+        Waiting_RX = 0
+    elseif Menu.SelLine == 8 then -- Prev
+        Menu.Cur = Menu.Prev
+        Menu.Id = Menu.PrevId
+        Menu.SelLine = 0
+        Phase = MENU_TITLE
+        Waiting_RX = 0
+    elseif Menu.SelLine ~= nil and Line[Menu.SelLine].Next ~= nil then
+      if Line[Menu.SelLine].Type == MENU then -- Next menu exist
+        Menu.Cur = Line[Menu.SelLine].Next
+        Menu.Id = Line[Menu.SelLine].NextId
+        Phase = MENU_TITLE
+        Waiting_RX = 0
+      else
+        -- value entry
+        if Menu.EditLine == Menu.SelLine then
+          Menu.EditLine = nil
+          Value_Changed = 0
+          Phase = VALUE_CHANGED
+          Waiting_RX = 0
+        else
+          Menu.EditLine = Menu.SelLine
+        end
+      end
+    end
+  end
+end
+
+local function DSM_Send_Receive()
+  if Waiting_RX == 0 then
+    Waiting_RX = 1
+    -- Need to send a request
+    if Phase == RX_VERSION then -- request RX version
+      DSM_Send(0x11,0x06,0x00,0x14,0x00,0x00)
+    elseif Phase == WAIT_CMD then -- keep connection open
+      DSM_Send(0x00,0x04,0x00,0x00)
+    elseif Phase == MENU_TITLE then -- request menu title
+      if Menu.Cur == nil then
+        DSM_Send(0x12,0x06,0x00,0x14,0x00,0x00) -- first menu only
+        Menu.Cur = 0
+      else
+        DSM_Send(0x16,0x06,Menu.Id,Menu.Cur,0x00,Menu.SelLine)
+      end
+    elseif Phase == MENU_LINES then -- request menu lines
+      if Menu.CurLine == nil then
+        DSM_Send(0x13,0x04,Menu.Id,Menu.Cur) -- line 0
+      elseif Menu.CurLine >= 0x80 then
+        local last_byte={0x40,0x01,0x02,0x04,0x00,0x00} -- unknown...
+        DSM_Send(0x20,0x06,Menu.CurLine-0x80,Menu.CurLine-0x80,0x00,last_byte[Menu.CurLine-0x80+1]) -- line X
+      else
+        DSM_Send(0x14,0x06,Menu.Id,Menu.Cur,0x00,Menu.CurLine) -- line X
+      end
+    elseif Phase == MENU_VALUES then -- request menu values
+      DSM_Send(0x15,0x06,Menu.Id,Menu.Cur,Line[Menu.CurLine].ValId,Menu.CurLine) -- line X
+    elseif Phase == VALUE_CHANGING then -- send value
+      local value=Line[Menu.SelLine].Val
+      if value < 0 then
+        value = 0x10000 + value
+      end
+      DSM_Send(0x18,0x06,Line[Menu.SelLine].ValId,Menu.SelLine,bit32.rshift(value,8),bit32.band(value,0xFF)) -- send current value
+      Phase = VALUE_CHANGING_WAIT
+    elseif Phase == VALUE_CHANGED then -- send value
+      if Value_Changed == 0 then
+        local value=Line[Menu.SelLine].Val
+        if value < 0 then
+          value = 0x10000 + value
+        end
+        DSM_Send(0x18,0x06,Line[Menu.SelLine].ValId,Menu.SelLine,bit32.rshift(value,8),bit32.band(value,0xFF)) -- send current value
+        Value_Changed = Value_Changed + 1
+        Waiting_RX = 0
+      elseif Value_Changed == 1 then
+        DSM_Send(0x19,0x06,Line[Menu.SelLine].ValId,Menu.SelLine) -- validate
+      --  Value_Changed = Value_Changed + 1
+      --  Waiting_RX = 0
+      --elseif Value_Changed == 2 then
+      --  DSM_Send(0x1B,0x06,0x10,Menu.SelLine) -- validate again?
+      --  Value_Changed = Value_Changed + 1
+      end
+    elseif Phase == VALUE_CHANGING_WAIT then
+        DSM_Send(0x1A,0x06,Line[Menu.SelLine].ValId,Menu.SelLine)
+    end
+    multiBuffer(10,0x00);
+    Retry = 50
+  elseif multiBuffer(10) == 0x09 then
+    -- Answer received
+    --if multiBuffer(11) == 0x00 then -- waiting for commands?
+    if multiBuffer(11) == 0x01 then -- read version
+      --ex: 0x09 0x01 0x00 0x15 0x02 0x22 0x01 0x00 0x14 0x00 0x00 0x00 0x00 0x00 0x00 0x00
+      RX.Name = Get_Text(multiBuffer(13))
+      RX.Version = multiBuffer(14).."."..multiBuffer(15).."."..multiBuffer(16)
+      Phase = MENU_TITLE
+    elseif multiBuffer(11) == 0x02 then -- read menu title
+      --ex: 0x09 0x02 0x4F 0x10 0xA5 0x00 0x00 0x00 0x50 0x10 0x10 0x10 0x00 0x00 0x00 0x00
+      Menu.Cur = multiBuffer(12)
+      Menu.Id  = multiBuffer(13)
+      Menu.Title = Get_Text(multiBuffer(14)+multiBuffer(15)*256)
+      Menu.Prev = multiBuffer(16)
+      Menu.PrevId = multiBuffer(17)
+      Menu.Next = multiBuffer(18)
+      Menu.NextId = multiBuffer(19)
+      Menu.Back = multiBuffer(20)
+      Menu.BackId = multiBuffer(21)
+      for i = 0, 6 do  -- clear menu
+        Line[i] = { Menu = nil, Id = nil, Type = nil, Text="", Next = nil, NextId = nil, ValLine = nil, ValId = nil, Min, Max, Def, Val, Unit, Step }
+      end
+      Menu.CurLine = nil
+      if Menu.Next ~= 0 then
+        Menu.SelLine = 7 -- highlight Next
+      else
+        Menu.SelLine = -1 -- highlight Back
+      end
+      Blink = 0
+      Phase = MENU_LINES
+    elseif multiBuffer(11) == 0x03 then -- read menu lines
+      --ex: 0x09 0x03 0x00 0x10 0x00 0x1C 0xF9 0x00 0x10 0x10 0x00 0x00 0x00 0x00 0x03 0x00
+      --              Menu Id   line Type Text_idx  Next  V_Id Val_Min   Val_Max   Val_Def
+      --ex: 0x09 0x03 0x61 0x10 0x00 0x6C 0x50 0x00 0x00 0x10 0x36 0x00 0x49 0x00 0x36 0x00
+      Menu.CurLine = multiBuffer(14)
+      local line = Line[Menu.CurLine]
+      line.Menu = multiBuffer(12)
+      line.Id = multiBuffer(13) -- not quite sure yet
+      line.Type = multiBuffer(15) -- not quite sure yet: 1C is text menu only, 4C/6C is text followed by text list, C0 is text followed by percentage value
+      line.Text = Get_Text(multiBuffer(16)+multiBuffer(17)*256)
+      if multiBuffer(18) == Menu.Cur then
+        line.Next = nil
+      else
+        line.Next = multiBuffer(18) -- not quite sure yet: 1C=text menu=>next menu, others=>line number of the value
+      end
+      if Menu.SelLine == -1 and line.Next ~= nil then -- Auto select first line of the menu
+        Menu.SelLine = Menu.CurLine
+      end
+      line.NextId = multiBuffer(19) -- not quite sure yet
+      line.ValLine = multiBuffer(18) -- not quite sure yet
+      line.ValId = multiBuffer(19) -- not quite sure yet
+      line.Min = conv_int16(multiBuffer(20)+multiBuffer(21)*256)
+      line.Max = conv_int16(multiBuffer(22)+multiBuffer(23)*256)
+      line.Def = conv_int16(multiBuffer(24)+multiBuffer(25)*256)
+      if line.Type == MENU then
+        -- nothing to do on menu entries
+      elseif line.Type == LIST_MENU_NOCHANGING or line.Type == LIST_MENU2 then
+        line.Val = nil --line.Def - line.Min -- use default value not sure if needed
+        line.Def = line.Min -- pointer to the start of the list in Text
+        line.Max = line.Max - line.Min -- max index
+        line.Min = 0 -- min index
+      else -- default to numerical value
+        line.Val = nil --line.Def -- use default value not sure if needed
+      end
+      if line.Type ~= 0x1C then -- value to follow
+        line.Text = line.Text..":"
+      end
+      Phase = MENU_LINES
+    elseif multiBuffer(11) == 0x04 then -- read menu values
+      --ex: 0x09 0x04 0x53 0x10 0x00 0x10 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
+      --              Menu MeId line VaId Value
+      --ex: 0x09 0x04 0x61 0x10 0x02 0x10 0x01 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
+      Menu.CurLine = multiBuffer(14)
+      Line[Menu.CurLine].Val = conv_int16(multiBuffer(16)+multiBuffer(17)*256)
+      Phase = MENU_VALUES
+    elseif multiBuffer(11) == 0x05 then -- unknown... need to get through the lines...
+      Menu.CurLine = 0x80 + multiBuffer(12)
+      Phase = MENU_LINES
+    elseif multiBuffer(11) == 0x00 and Phase == VALUE_CHANGING then
+      Phase = VALUE_CHANGING_WAIT
+    end
+    -- Data processed
+    Waiting_RX = 0
+    multiBuffer(10,0x00)
+    Retry = 50
+  else
+    Retry = Retry - 1
+    if Retry <= 0 then
+      -- Retry the RX request
+      Retry = 50
+      Waiting_RX = 0
+      if Phase ~= RX_VERSION and Phase ~= VALUE_CHANGING_WAIT then
+        Phase = WAIT_CMD
+      end
+    end
+  end
+end
+
+local function DSM_Display()
+  lcd.clear()
+  if LCD_W == 480 then
+    --Draw title
+    lcd.drawFilledRectangle(0, 0, LCD_W, 30, TITLE_BGCOLOR)
+    lcd.drawText(1, 5, "DSM Forward Programming", MENU_TITLE_COLOR)
+    --Draw RX Menu
+    if Phase == RX_VERSION then
+      lcd.drawText(10,50,"No compatible DSM RX...", BLINK)
+    else
+      if Menu.Title ~=  nil then
+        local attrib=0;
+        lcd.drawText(80,32,Menu.Title,MIDSIZE)
+        for i = 0, 6 do
+          if i == Menu.SelLine then
+            attrib = INVERS
+          else
+            attrib = 0
+          end
+          if Line[i] ~= nil and Line[i].Type ~= nil then
+            if Line[i].Type ~= MENU then -- list/value
+              if Line[i].Val ~= nil then
+                local text=""
+                if Line[i].Type == LIST_MENU_NOCHANGING or Line[i].Type == LIST_MENU2 then
+                  text = Get_Text(Line[i].Val+Line[i].Def)
+                elseif Line[i].Type == PERCENTAGE_VALUE then
+                  text = Line[i].Val.." %"
+                else
+                  text = Line[i].Val
+                end
+                if Menu.EditLine == Menu.SelLine then -- blink edited entry
+                  Blink = Blink + 1
+                  if Blink > 25 then
+                    attrib = 0
+                    if Blink > 50 then
+                      Blink = 0
+                    end
+                  end
+                end
+                lcd.drawText(240,32+20*(i+2), text, attrib) -- display value
+              end
+              attrib = 0
+            end
+            lcd.drawText(10,32+20*(i+2), Line[i].Text, attrib) -- display text
+          end
+        end
+        if Menu.SelLine == -1 then
+          lcd.drawText(437,32, "Back", INVERS)
+        else
+          lcd.drawText(437,32, "Back", 0)
+        end
+        lcd.drawRectangle(437-5, 32-2, 47, 25)
+        if Menu.Next ~= 0 then
+          if Menu.SelLine == 7 then
+            lcd.drawText(437,220, "Next",INVERS)
+          else
+            lcd.drawText(437,220, "Next")
+          end
+          lcd.drawRectangle(437-5, 220-2, 47, 25)
+        end
+        if Menu.Prev ~= 0 then
+          if Menu.SelLine == 8 then
+            lcd.drawText(5,220, "Prev",INVERS)
+          else
+            lcd.drawText(5,220, "Prev")
+          end
+          lcd.drawRectangle(5-5, 220-2, 47, 25)
+        end
+      end
+      lcd.drawText(170,252, "RX "..RX.Name.." v"..RX.Version) -- display RX info
+    end
+  else
+    -- --Draw RX Menu on LCD_W=128
+    -- if multiBuffer( 4 ) == 0xFF then
+      -- lcd.drawText(2,17,"No compatible DSM RX...",SMLSIZE)
+    -- else
+      -- if Retry_128 ~= 0 then
+        -- --Intro page
+        -- Retry_128 = Retry_128 - 1
+        -- lcd.drawScreenTitle("DSM Forward Programming",0,0)
+        -- lcd.drawText(2,17,"Press Prev Page for previous Menu" ,SMLSIZE)
+      -- else
+        -- --Menu page
+        -- for line = 0, 7, 1 do
+          -- for i = 0, 21-1, 1 do
+            -- value=multiBuffer( line*21+6+i )
+            -- if value > 0x80 then
+              -- value = value - 0x80
+              -- lcd.drawText(2+i*6,1+8*line,string.char(value).." ",SMLSIZE+INVERS)
+            -- else
+              -- lcd.drawText(2+i*6,1+8*line,string.char(value),SMLSIZE)
+            -- end
+          -- end
+        -- end
+      -- end
+    -- end
+  end
+end
+
+-- Init
+local function DSM_Init()
+  --Set protocol to talk to
+  multiBuffer( 0, string.byte('D') )
+  --test if value has been written
+  if multiBuffer( 0 ) ~=  string.byte('D') then
+    error("Not enough memory!")
+    return 2
+  end
+  --Init TX buffer
+  multiBuffer( 3, 0x00 )
+  --Init RX buffer
+  multiBuffer( 10, 0x00 )
+  --Init telemetry
+  multiBuffer( 0, string.byte('D') )
+  multiBuffer( 1, string.byte('S') )
+  multiBuffer( 2, string.byte('M') )
+
+  --Text to be displayed -> need to use a file instead?
+  --RX names--
+  Text[0x0014]="SPM4651T"
+  Text[0x0015]="AR637T"
+  --Lists--
+  Text[0x0036]="Throttle"
+  Text[0x0037]="Aileron"
+  Text[0x0038]="Elevator"
+  Text[0x0039]="Rudder"
+  Text[0x003A]="Gear"
+
+  --******
+  --This part is strange since the AR637T needs
+  for i=1,7 do -- 3B..41
+    Text[0x003A+i]="Aux"..i
+  end
+  for i=1,8 do -- 41..49
+    Text[0x0041+i]="XPlus-"..i
+  end
+  --But FOTO-PETE reports that it should be:
+  Text[0x0040]="Roll"
+  Text[0x0041]="Pitch"
+  Text[0x0042]="Yaw"
+  Text[0x0046]="Priority"
+  --******
+  
+  Text[0x004A]="Failsafe"
+  Text[0x004B]="Main Menu"
+  Text[0x004E]="Position"
+  Text[0x0050]="Outputs"
+  Text[0x0051]="Output Channel 1"
+  Text[0x0052]="Output Channel 2"
+  Text[0x0053]="Output Channel 3"
+  Text[0x0054]="Output Channel 4"
+  Text[0x0055]="Output Channel 5"
+  Text[0x0056]="Output Channel 6"
+  --Text[0x005E]="Inhibit"
+  Text[0x005F]="Hold Last"
+  Text[0x0060]="Preset"
+  --Text[0x0061]="Custom"
+  --Messages--
+  Text[0x0078]="FM Channel"
+  Text[0x0080]="Orientation"
+  Text[0x0085]="Frame Rate"
+  Text[0x0086]="System Setup"
+  Text[0x0087]="F-Mode Setup"
+  Text[0x0088]="Enabled F-Modes"
+  Text[0x008A]="Gain Sensitivity"
+  Text[0x0090]="Apply"
+  Text[0x0093]="Complete"
+  Text[0x0094]="Done"
+  Text[0x0097]="Factory Reset"
+  Text[0x009A]="Capture Failsafe Positions"
+  Text[0x009C]="Custom Failsafe"
+  Text[0x00A5]="First Time Setup"
+  Text[0x00AD]="Gain Channel Select"
+  Text[0x00B6]="FM1"
+  Text[0x00B7]="FM2"
+  Text[0x00B8]="FM3"
+  Text[0x00B9]="FM4"
+  Text[0x00BA]="FM5"
+  Text[0x00BB]="FM6"
+  Text[0x00BC]="FM7"
+  Text[0x00BD]="FM8"
+  Text[0x00BE]="FM9"
+  Text[0x00BF]="FM10"
+  Text[0x00F9]="Gyro settings"
+  Text[0x00FE]="Stick Priority"
+  Text[0x0100]="Make sure the model has been"
+  Text[0x0101]="configured, including wing type,"
+  Text[0x0102]="reversing, travel, trimmed, etc."
+  Text[0x0103]="before continuing setup."
+  Text[0x0104]="0104"
+  Text[0x0105]="0105"
+  Text[0x0106]="Any wing type, channel assignment,"
+  Text[0x0107]="subtrim, or servo reversing changes"
+  Text[0x0108]="require running through initial"
+  Text[0x0109]="setup again."
+  Text[0x010A]="010A"
+  Text[0x010B]="010B"
+  Text[0x0190]="Relearn Servo Settings"
+  Text[0x019C]="Enter Receiver Bind Mode"
+  Text[0x01DC]="AS3X"
+  Text[0x01DD]="AS3X Settings"
+  Text[0x01DE]="AS3X Gains"
+  Text[0x01E0]="Rate Gains"
+  Text[0x020A]="Restore from Backup"
+  Text[0x0209]="Save to Backup"
+  Text[0x020D]="First Time SAFE Setup"
+  Text[0x021A]="Set the model level,"
+  Text[0x021B]="and press Continue."
+  Text[0x021C]="021C"
+  Text[0x021D]="021D"
+  
+  Text[0x021F]="Set the model on its nose,"
+  Text[0x0220]="and press Continue. If the"
+  Text[0x0221]="orientation on the next"
+  Text[0x0222]="screen is wrong go back"
+  Text[0x0223]="and try again."
+  Text[0x0224]="Continue"
+  Text[0x0229]="Set Orientation Manually"
+  
+  Text[0x0227]="Other settings"
+  Text[0x022B]="WARNING!"
+  Text[0x022C]="This will reset the"
+  Text[0x022D]="configuration to factory"
+  Text[0x022E]="defaults. This does not"
+  Text[0x022F]="affect the backup config."
+  Text[0x0230]="0230"
+  Text[0x0231]="This will overwrite the"
+  Text[0x0232]="backup memory with your"
+  Text[0x0233]="current configuartion."
+  Text[0x0234]="0234"
+  Text[0x0235]="0235"
+  Text[0x0236]="This will overwrite the"
+  Text[0x0237]="current config with"
+  Text[0x0238]="that which is in"
+  Text[0x0239]="the backup memory."
+  Text[0x023A]="023A"
+  Text[0x023D]="Copy Flight Mode Settings"
+  Text[0x0240]="Utilities"
+  Text[0x8001]="Flight Mode 1"
+  Text[0x8002]="Flight Mode 2"
+  Text[0x8003]="Flight Mode 3"
+end
+
+-- Main
+local function DSM_Run(event)
+  if event == nil then
+    error("Cannot be run as a model script!")
+    return 2
+  elseif event == EVT_VIRTUAL_EXIT then
+    DSM_Release()
+    return 2
+  else
+    DSM_Menu(event)
+    DSM_Send_Receive()
+    DSM_Display()
+    return 0
+  end
+end
+
+return { init=DSM_Init, run=DSM_Run }

Lua_scripts/MultiChan.txt

@@ -6,6 +6,7 @@
 14,4,Bayang,DHD_D4,1,Flip,RTH,Pict,Video,HLess,Invert,Rates,TakeOf,EmStop
 14,5,Bayang,QX100,1,Flip,RTH,Pict,Video,HLess,Invert,Rates,TakeOf,EmStop
 59,0,BayangRX,RX,1,AnAux1,AnAux2,Flip,RTH,Pict,Video
+59,1,BayangRX,CPPM,1,AnAux1,AnAux2,Flip,RTH,Pict,Video
 41,0,Bugs,3-6-8,0,Arm,Angle,Flip,Pict,Video,LED
 42,0,BugsMini,Mini,0,Arm,Angle,Flip,Pict,Video,LED
 42,1,BugsMini,3H,0,Arm,Angle,Flip,Pict,Video,LED,AltHol
@@ -28,15 +29,16 @@
 7,3,Devo,6CH,0,CH5,CH6
 7,4,Devo,7CH,0,CH5,CH6,CH7
 33,0,DM022,Std,1,Flip,LED,Cam1,Cam2,HLess,RTH,RLow
-6,0,DSM,2_22,0,CH5,CH6,CH7,CH8,CH9,CH10,CH11,CH12,n-a,ThKill
-6,1,DSM,2_11,0,CH5,CH6,CH7,CH8,CH9,CH10,CH11,CH12,n-a,ThKill
-6,2,DSM,X_22,0,CH5,CH6,CH7,CH8,CH9,CH10,CH11,CH12,n-a,ThKill
-6,3,DSM,X_11,0,CH5,CH6,CH7,CH8,CH9,CH10,CH11,CH12,n-a,ThKill
+6,0,DSM,2_1F,0,CH5,CH6,CH7,CH8,CH9,CH10,CH11,CH12,n-a,ThKill
+6,1,DSM,2_2F,0,CH5,CH6,CH7,CH8,CH9,CH10,CH11,CH12,n-a,ThKill
+6,2,DSM,X_1F,0,CH5,CH6,CH7,CH8,CH9,CH10,CH11,CH12,n-a,ThKill
+6,3,DSM,X_2F,0,CH5,CH6,CH7,CH8,CH9,CH10,CH11,CH12,n-a,ThKill
 6,4,DSM,AUTO,0,CH5,CH6,CH7,CH8,CH9,CH10,CH11,CH12,n-a,ThKill
+6,5,DSM,R_1F,0,AUX3,AUX4,AUX5
 70,0,DSM_RX,RX,0,CH5,CH6,CH7,CH8,CH9,CH10,CH11,CH12
+70,1,DSM_RX,CPPM,0,CH5,CH6,CH7,CH8,CH9,CH10,CH11,CH12
 45,0,E01X,E012,1,n-a,Flip,n-a,HLess,RTH
 45,1,E01X,E015,1,Arm,Flip,LED,HLess,RTH
-45,2,E01X,E016H,1,Stop,Flip,n-a,HLess,RTH
 16,0,ESKY,Std,0,Gyro,Pitch
 16,1,ESKY,ET4,0,Gyro,Pitch
 35,0,ESKY150,4CH,0
@@ -51,8 +53,12 @@
 28,1,Flysky_AFHDS2A,PPM_IBUS,0,CH5,CH6,CH7,CH8,CH9,CH10,CH11,CH12,CH13,CH14
 28,2,Flysky_AFHDS2A,PWM_SBUS,0,CH5,CH6,CH7,CH8,CH9,CH10,CH11,CH12,CH13,CH14
 28,3,Flysky_AFHDS2A,PPM_SBUS,0,CH5,CH6,CH7,CH8,CH9,CH10,CH11,CH12,CH13,CH14
+28,4,Flysky_AFHDS2A,PWM_IB16,0,CH5,CH6,CH7,CH8,CH9,CH10,CH11,CH12,CH13,CH14,CH15,CH16
+28,5,Flysky_AFHDS2A,PPM_IB16,0,CH5,CH6,CH7,CH8,CH9,CH10,CH11,CH12,CH13,CH14,CH15,CH16
 56,0,Flysky2A_RX,RX,0,CH5,CH6,CH7,CH8,CH9,CH10,CH11,CH12,CH13,CH14
-53,0,Flyzone,FZ-410,0
+56,1,Flysky2A_RX,CPPM,0,CH5,CH6,CH7,CH8,CH9,CH10,CH11,CH12,CH13,CH14
+53,0,Height,5ch,0,Gear
+53,1,Height,8ch,0,Gear,Gyro,Flap,Light
 25,0,FrSkyV,V8,0,CH5,CH6,CH7,CH8
 3,0,FrSkyD,D8,0,CH5,CH6,CH7,CH8
 3,0,FrSkyD,D8Cloned,0,CH5,CH6,CH7,CH8
@@ -63,17 +69,21 @@
 15,2,FrSkyX,D16_LBT,0,CH5,CH6,CH7,CH8,CH9,CH10,CH11,CH12,CH13,CH14,CH15,CH16
 15,3,FrSkyX,D16_8CH_LBT,0,CH5,CH6,CH7,CH8
 15,4,FrSkyX,D16Cloned,0,CH5,CH6,CH7,CH8,CH9,CH10,CH11,CH12,CH13,CH14,CH15,CH16
+15,5,FrSkyX,D16Cloned_8CH,0,CH5,CH6,CH7,CH8,CH9,CH10,CH11,CH12,CH13,CH14,CH15,CH16
 64,0,FrSkyX2,D16_FCC,0,CH5,CH6,CH7,CH8,CH9,CH10,CH11,CH12,CH13,CH14,CH15,CH16
 64,1,FrSkyX2,D16_8CH_FCC,0,CH5,CH6,CH7,CH8
 64,2,FrSkyX2,D16_LBT,0,CH5,CH6,CH7,CH8,CH9,CH10,CH11,CH12,CH13,CH14,CH15,CH16
 64,3,FrSkyX2,D16_8CH_LBT,1,CH5,CH6,CH7,CH8
 64,4,FrSkyX2,D16Cloned,0,CH5,CH6,CH7,CH8,CH9,CH10,CH11,CH12,CH13,CH14,CH15,CH16
+64,5,FrSkyX2,D16Cloned_8CH,0,CH5,CH6,CH7,CH8,CH9,CH10,CH11,CH12,CH13,CH14,CH15,CH16
 65,0,FrSkyR9,R9_915,0,CH5,CH6,CH7,CH8,CH9,CH10,CH11,CH12,CH13,CH14,CH15,CH16
 65,1,FrSkyR9,R9_868,0,CH5,CH6,CH7,CH8,CH9,CH10,CH11,CH12,CH13,CH14,CH15,CH16
 65,2,FrSkyR9,R9_915_8CH,0,CH5,CH6,CH7,CH8
 65,3,FrSkyR9,R9_968_8CH,0,CH5,CH6,CH7,CH8
 55,0,FrSkyRX,RX,0,CH5,CH6,CH7,CH8,CH9,CH10,CH11,CH12,CH13,CH14,CH15,CH16
 55,1,FrSkyRX,CloneTX,0
+55,2,FrSkyRX,EraseTX,0
+55,3,FrSkyRX,CPPM,0,CH5,CH6,CH7,CH8,CH9,CH10,CH11,CH12,CH13,CH14,CH15,CH16
 58,0,FX816,P38,1
 20,0,FY326,FY326,1,Flip,RTH,HLess,Expert,Calib
 20,1,FY326,FY319,1,Flip,RTH,HLess,Expert,Calib
@@ -94,15 +104,18 @@
 26,1,Hontai,JJRCX1,1,Flip,Arm,Pict,Video,HLess,RTH,Calib
 26,2,Hontai,X5C1,1,Flip,Arm,Pict,Video,HLess,RTH,Calib
 26,3,Hontai,FQ777_951,1,Flip,Arm,Pict,Video,HLess,RTH,Calib
-57,0,HoTT,Std,0,CH5,CH6,CH7,CH8,CH9,CH10,CH11,CH12
+57,0,HoTT,Sync,0,CH5,CH6,CH7,CH8,CH9,CH10,CH11,CH12,CH13,CH14,CH15,CH16
+57,1,HoTT,No_Sync,0,CH5,CH6,CH7,CH8,CH9,CH10,CH11,CH12,CH13,CH14,CH15,CH16
 2,0,Hubsan,H107,1,Flip,Light,Pict,Video,HLess
 2,1,Hubsan,H301,0,RTH,Light,Stab,Video
 2,2,Hubsan,H501,0,RTH,Light,Pict,Video,HLess,GPS_H,ALT_H,Flip,FModes
 22,0,J6Pro,Std,0,CH5,CH6,CH7,CH8,CH9,CH10,CH11,CH12
-71,0,JJRC345,Std,1,Flip,HLess,RTH
+71,0,JJRC345,JJRC345,1,Flip,HLess,RTH,LED,UNK1,UNK2,UNK3
+71,1,JJRC345,SkyTmblr,1,Flip,HLess,RTH,LED,UNK1,UNK2,UNK3
 49,0,KF606,Std,1,Trim
 9,0,KN,WLToys,0,DRate,THold,IdleUp,Gyro,Ttrim,Atrim,Etrim
 9,1,KN,Feilun,0,DRate,THold,IdleUp,Gyro,Ttrim,Atrim,Etrim
+73,0,Kyosho,Std,0,CH5,CH6,CH7,CH8,CH9,CH10,CH11,CH12,CH13,CH14
 18,0,MJXQ,WHL08,1,Flip,LED,Pict,Video,HLess,RTH,AuFlip,Pan,Tilt,Rate
 18,1,MJXQ,X600,1,Flip,LED,Pict,Video,HLess,RTH,AuFlip,Pan,Tilt,Rate
 18,2,MJXQ,X800,1,Flip,LED,Pict,Video,HLess,RTH,AuFlip,Pan,Tilt,Rate
@@ -115,9 +128,13 @@
 17,2,MT99XX,YZ,1,Flip,LED,Pict,Video,HLess
 17,3,MT99XX,LS,1,Flip,Invert,Pict,Video,HLess
 17,4,MT99XX,FY805,1,Flip,n-a,n-a,n-a,HLess
+17,5,MT99XX,A180,0,3D_6G
+17,6,MT99XX,Dragon,0,Mode,RTH
 44,0,NCC1701,Std,1,Warp
+77,0,OMP,M2,0,THold,IdleUp,6G_3D
 60,0,Pelikan,PRO_V4,0,CH5,CH6,CH7,CH8
 60,1,Pelikan,LITE_V4,0,CH5,CH6,CH7,CH8
+60,2,Pelikan,SCX24,0
 51,0,Potensic,A20,1,TakLan,Emerg,Mode,HLess
 66,0,Propel,74-Z,1,LEDs,RollCW,RolCCW,Fire,Weapon,Calib,AltHol,TakeOf,Land,Train
 29,0,Q2x2,Q222,1,Flip,LED,Mod2,Mod1,HLess,RTH,XCal,YCal
@@ -128,9 +145,13 @@
 31,2,Q303,CX10D,1,Arm,Flip
 31,3,Q303,CX10WD,1,Arm,Flip
 72,0,Q90C,Std,0,FMode,VTX+
+74,0,RadioLink,Surface,0,CH5,CH6,CH7,CH8,FS_CH1,FS_CH2,FS_CH3,FS_CH4,FS_CH5,FS_CH6,FS_CH7,FS_CH8
+74,1,RadioLink,Air,0,CH5,CH6,CH7,CH8,FS_CH1,FS_CH2,FS_CH3,FS_CH4,FS_CH5,FS_CH6,FS_CH7,FS_CH8
+74,2,RadioLink,DumboRC,0,CH5,CH6,CH7,CH8,FS_CH1,FS_CH2,FS_CH3,FS_CH4,FS_CH5,FS_CH6,FS_CH7,FS_CH8
+76,0,Realacc,R11,1,Flip,Light,Calib,HLess,RTH,UNK
 50,0,Redpine,Fast,0,sCH5,sCH6,sCH7,sCH8,sCH9,sCH10,sCH11,sCH12,sCH13,sCH14,sCH15,sCH16
 50,1,Redpine,Slow,0,sCH5,sCH6,sCH7,sCH8,sCH9,sCH10,sCH11,sCH12,sCH13,sCH14,sCH15,sCH16
-21,0,SFHSS,Std,0,CH5,CH6,CH7,CH8
+21,0,Futaba,SFHSS,0,CH5,CH6,CH7,CH8
 19,0,Shenqi,Cycle,1
 68,0,Skyartec,Std,0,CH5,CH6,CH7
 11,0,SLT,V1,0,Gear,Pitch
@@ -163,3 +184,15 @@
 8,3,YD717,XinXun,1,Flip,Light,Pict,Video,HLess
 8,4,YD717,NiHui,1,Flip,Light,Pict,Video,HLess
 52,0,ZSX,280,1,Light
+78,0,M-Link,Std,0,CH5,CH6,CH7,CH8,CH9,CH10,CH11,CH12,CH13,CH14,CH15,CH16
+79,0,WFLY2,RF20x,0,CH5,CH6,CH7,CH8,CH9,CH10
+80,0,E016Hv2,E016Hv2,1,TakLan,EmStop,Flip,Calib,HLess,RTH
+81,0,E010r5,E010r5,1,Flip,LED,CALIB,HLess,RTH,GLIDE
+82,0,LOLI,Std,0,CH5,CH6,CH7,CH8,1SwSePpPw,2SwSePw,3SwSe,4SwSe,5SwSeSb,6SwSe,7SwSePw,8SwSe
+83,0,E129,E129,1,TakLan,EmStop,TrimA,TrimE,TrimR
+84,0,JOYSWAY,Std,0
+85,0,E016H,Std,1,Stop,Flip,n-a,HLess,RTH
+87,0,IKEA
+89,0,LOSI
+90,0,MouldKg,Analog
+90,1,MouldKg,Digit,E,F

Lua_scripts/MultiChannelsUpdater.lua

@@ -278,6 +278,31 @@ local function Multi_Init()
     ch_order = math.floor(ch_order/4)
     channel_names[bitand(ch_order,3)+1] = stick_names[1]
   end
+ 
+  --Exceptions on first 4 channels...
+  if ( protocol == 73 or (protocol == 74 and sub_protocol == 0) or (protocol == 60 and sub_protocol == 2) or protocol == 89) then -- Kyosho or RadioLink Surface or Pelikan/SCX24 or Losi
+    channel_names[1] = "ST"
+    channel_names[2] = "THR"
+    channel_names[3] = "CH3"
+    if(protocol == 60 and sub_protocol == 2) then
+      channel_names[4] = "n-a"
+    else
+      channel_names[4] = "CH4"
+    end
+  end
+  if ( protocol == 6 and sub_protocol == 5 ) then -- DSMR
+    channel_names[1] = "ST"
+    channel_names[2] = "THR"
+    channel_names[3] = "AUX1"
+    channel_names[4] = "AUX2"
+  end
+  if ( protocol == 90 ) then -- Mould King
+    channel_names[1] = "A"
+    channel_names[2] = "B"
+    channel_names[3] = "C"
+    channel_names[4] = "D"
+  end
+ 
   --Check MultiChan.txt
   local f = io.open("/SCRIPTS/TOOLS/MultiChan.txt", "r")
   if f == nil then return end

Lua_scripts/MultiConfig.lua

@@ -0,0 +1,525 @@
+---- #########################################################################
+---- #                                                                       #
+---- # Copyright (C) OpenTX                                                  #
+-----#                                                                       #
+---- # License GPLv2: http://www.gnu.org/licenses/gpl-2.0.html               #
+---- #                                                                       #
+---- # This program is free software; you can redistribute it and/or modify  #
+---- # it under the terms of the GNU General Public License version 2 as     #
+---- # published by the Free Software Foundation.                            #
+---- #                                                                       #
+---- # This program is distributed in the hope that it will be useful        #
+---- # but WITHOUT ANY WARRANTY; without even the implied warranty of        #
+---- # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the         #
+---- # GNU General Public License for more details.                          #
+---- #                                                                       #
+---- #########################################################################
+
+
+--###############################################################################
+-- Multi buffer for Config description
+-- To start operation:
+--   Write 0xFF at address 4 will request the buffer to be cleared
+--   Write "Conf" at address 0..3
+-- Read
+--   Read at address 12 gives the current config page
+--   Read at address 13..172 gives the current data of the page = 8 lines * 20 caracters
+-- Write
+--   Write at address 5..11 the command
+--   Write 0x01 at address 4 will send the command to the module
+-- !! Before exiting the script must write 0 at address 0 for normal operation !!
+--###############################################################################
+
+local Version = "v0.2"
+local Focus = -1
+local Page = 0
+local Edit = -1
+local Edit_pos = 1
+local Menu = { {text = "", field_type = 0, field_len = 0, field_value = {}, field_text = ""},
+               {text = "", field_type = 0, field_len = 0, field_value = {}, field_text = ""},
+               {text = "", field_type = 0, field_len = 0, field_value = {}, field_text = ""},
+               {text = "", field_type = 0, field_len = 0, field_value = {}, field_text = ""},
+               {text = "", field_type = 0, field_len = 0, field_value = {}, field_text = ""},
+               {text = "", field_type = 0, field_len = 0, field_value = {}, field_text = ""},
+               {text = "", field_type = 0, field_len = 0, field_value = {}, field_text = ""} }
+local Menu_value = {}
+local Blink = 0
+local ModuleNumber = 0
+local ModuleType = ""
+local Module = {}
+local InitialProtocol = 0
+
+function bitand(a, b)
+    local result = 0
+    local bitval = 1
+    while a > 0 and b > 0 do
+      if a % 2 == 1 and b % 2 == 1 then -- test the rightmost bits
+          result = result + bitval      -- set the current bit
+      end
+      bitval = bitval * 2 -- shift left
+      a = math.floor(a/2) -- shift right
+      b = math.floor(b/2)
+    end
+    return result
+end
+
+local function Config_Send(page, line, value)
+  local i
+  i = (page*16) + line
+  multiBuffer( 5, i )
+  for i = 1 , 6 , 1 do
+    multiBuffer( 5+i, value[i] )
+  end
+  multiBuffer( 4, 1 )
+end
+
+local function Config_Release()
+  --Set the protocol back to what it was
+  Module.protocol = InitialProtocol
+  model.setModule(ModuleNumber, Module)
+
+  --Stop requesting updates
+  local i
+  for i = 3 , 0 , -1 do
+    multiBuffer( i, 0 )
+  end
+end
+
+local function Config_Page( )
+  Config_Send(Page, 0, { 0, 0, 0, 0, 0, 0 })
+end
+
+local function Config_Draw_Edit( event )
+  local i
+  local text
+
+  if Menu[Focus].field_type == 0xD0 then
+  -- Editable Hex value
+    if Edit == -1 then
+    -- Init
+      Edit = 0
+      Edit_pos = 1
+      Blink = 0
+      for i = 1, Menu[Focus].field_len, 1 do
+        Menu_value[i] = Menu[Focus].field_value[i]
+      end
+    end
+    if Edit == 0 then
+    -- Not editing value
+      if event == EVT_VIRTUAL_ENTER then
+        if Edit_pos > Menu[Focus].field_len then
+        -- Save or Cancel
+          Edit = -1
+          if Edit_pos == Menu[Focus].field_len + 1 then
+          -- Save
+            Config_Send(Page, Focus, Menu_value)
+          end
+          return
+        else
+        -- Switch to edit mode
+          Edit = 1
+        end
+      elseif event == EVT_VIRTUAL_PREV and Edit_pos > 1 then
+      -- Move cursor
+        Edit_pos = Edit_pos - 1
+      elseif event == EVT_VIRTUAL_NEXT and Edit_pos < Menu[Focus].field_len + 2 then
+      -- Move cursor
+        Edit_pos = Edit_pos + 1
+      end
+    else
+    -- Editing value
+      if event == EVT_VIRTUAL_ENTER then
+      -- End edit
+        Edit = 0
+      elseif event == EVT_VIRTUAL_PREV then
+      -- Change value
+        Menu_value[Edit_pos] = Menu_value[Edit_pos] - 1
+      elseif event == EVT_VIRTUAL_NEXT then
+      -- Change value
+        Menu_value[Edit_pos] = Menu_value[Edit_pos] + 1
+      end
+      --Blink
+      Blink = Blink + 1
+      if Blink > 30 then
+        Blink = 0
+      end
+    end
+    --Display
+    if LCD_W == 480 then
+      lcd.drawRectangle(160-1, 100-1, 160+2, 55+2, TEXT_COLOR)
+      lcd.drawFilledRectangle(160, 100, 160, 55, TEXT_BGCOLOR)
+    else
+      lcd.clear()
+    end
+    for i = 1, Menu[Focus].field_len, 1 do
+      if i==Edit_pos and (Edit ~= 1 or Blink > 15) then
+        attrib = INVERS
+      else
+        attrib = 0
+      end
+      if LCD_W == 480 then
+        lcd.drawText(170+12*2*(i-1), 110, string.format('%02X', Menu_value[i]), attrib)
+      else
+        lcd.drawText(17+6*2*(i-1), 10, string.format('%02X', Menu_value[i]), attrib + SMLSIZE)
+      end
+    end
+    if Edit_pos == Menu[Focus].field_len + 1 then
+      attrib = INVERS
+    else
+      attrib = 0
+    end
+    if LCD_W == 480 then
+      lcd.drawText(170, 130, "Save", attrib)
+    else
+      lcd.drawText(17, 30, "Save", attrib + SMLSIZE)
+    end
+    if Edit_pos == Menu[Focus].field_len + 2 then
+      attrib = INVERS
+    else
+      attrib = 0
+    end
+    if LCD_W == 480 then
+      lcd.drawText(260, 130, "Cancel", attrib)
+    else
+      lcd.drawText(77, 30, "Cancel", attrib + SMLSIZE)
+    end
+
+  elseif Menu[Focus].field_type == 0x90 then
+  -- Action text
+    if Edit == -1 then
+    -- Init
+      Edit = 0
+      Edit_pos = 2
+    end
+    if event == EVT_VIRTUAL_ENTER then
+      -- Exit
+      Edit = -1
+      if Edit_pos == 1 then
+      -- Yes
+        Config_Send(Page, Focus, { 0xAA, 0xAA, 0xAA, 0xAA, 0xAA, 0xAA } )
+      end
+      return
+    elseif event == EVT_VIRTUAL_PREV and Edit_pos > 1 then
+    -- Switch to Yes
+      Edit_pos = Edit_pos - 1
+    elseif event == EVT_VIRTUAL_NEXT and Edit_pos < 2 then
+    -- Switch to No
+      Edit_pos = Edit_pos + 1
+    end
+    -- Display
+    if LCD_W == 480 then
+      lcd.drawRectangle(160-1, 100-1, 160+2, 55+2, TEXT_COLOR)
+      lcd.drawFilledRectangle(160, 100, 160, 55, TEXT_BGCOLOR)
+    else
+      lcd.clear()
+    end
+    if LCD_W == 480 then
+      lcd.drawText(170, 110, Menu[Focus].field_text .. "?")
+    else
+      lcd.drawText(17, 10, Menu[Focus].field_text .. "?", SMLSIZE)
+    end
+    if Edit_pos == 1 then
+      attrib = INVERS
+    else
+      attrib = 0
+    end
+    if LCD_W == 480 then
+      lcd.drawText(170, 130, "Yes", attrib)
+    else
+      lcd.drawText(17, 30, "Yes", attrib + SMLSIZE)
+    end
+    if Edit_pos == 2 then
+      attrib = INVERS
+    else
+      attrib = 0
+    end
+    if LCD_W == 480 then
+      lcd.drawText(260, 130, "No", attrib)
+    else
+      lcd.drawText(77, 30, "No", attrib)
+    end
+  end
+end
+
+local function Config_Next_Prev( event )
+-- Next Prev on main menu
+  local line
+  if event == EVT_VIRTUAL_PREV then
+    for line = Focus - 1, 1, -1 do
+      if Menu[line].field_type >= 0x80 and Menu[line].field_type ~= 0xA0 and Menu[line].field_type ~= 0xC0 then
+        Focus = line
+        break
+      end
+    end
+  elseif event == EVT_VIRTUAL_NEXT then
+    for line = Focus + 1, 7, 1 do
+      if Menu[line].field_type >= 0x80 and Menu[line].field_type ~= 0xA0 and Menu[line].field_type ~= 0xC0 then
+        Focus = line
+        break
+      end
+    end
+  end
+end
+
+local function Config_Draw_Menu()
+-- Main menu
+  local i
+  local value
+  local line
+  local length
+  local text
+  
+  lcd.clear()
+
+  if LCD_W == 480 then
+    --Draw title
+    lcd.drawFilledRectangle(0, 0, LCD_W, 30, TITLE_BGCOLOR)
+    lcd.drawText(1, 5, "Multi Config " .. Version, MENU_TITLE_COLOR)
+    if multiBuffer(13) == 0x00 then
+      lcd.drawText(10,50,"No Config telemetry...", BLINK)
+    end
+  else
+    --Draw on LCD_W=128
+    lcd.drawText(1, 0, "Multi Config " .. Version, SMLSIZE)
+    if multiBuffer(13) == 0x00 then
+      lcd.drawText(2,17,"No Config telemetry...",SMLSIZE)
+    end
+  end
+
+  if multiBuffer(13) ~= 0x00 then
+    if LCD_W == 480 then
+      --Draw firmware version and channels order
+      local ch_order = multiBuffer(17)
+      local channel_names = {}
+      channel_names[bitand(ch_order,3)+1] = "A"
+      ch_order = math.floor(ch_order/4)
+      channel_names[bitand(ch_order,3)+1] = "E"
+      ch_order = math.floor(ch_order/4)
+      channel_names[bitand(ch_order,3)+1] = "T"
+      ch_order = math.floor(ch_order/4)
+      channel_names[bitand(ch_order,3)+1] = "R"
+      lcd.drawText(150, 5, ModuleType.." v" .. multiBuffer(13) .. "." .. multiBuffer(14) .. "." .. multiBuffer(15) .. "." .. multiBuffer(16) .. " " .. channel_names[1] .. channel_names[2] .. channel_names[3] .. channel_names[4], MENU_TITLE_COLOR)
+    else
+      lcd.drawText(76, 0, "/Fw" .. multiBuffer(13) .. "." .. multiBuffer(14) .. "." .. multiBuffer(15) .. "." .. multiBuffer(16),SMLSIZE) -- .. " " .. channel_names[1] .. channel_names[2] .. channel_names[3] .. channel_names[4])
+    end
+
+    --Draw Menu
+    for line = 1, 7, 1 do
+      --Clear line info
+      Menu[line].text = ""
+      Menu[line].field_type = 0
+      Menu[line].field_len = 0
+      for i = 1, 7, 1 do
+        Menu[line].field_value[i] = 0
+      end
+      Menu[line].field_text = ""
+      length = 0
+      --Read line from buffer
+      for i = 0, 20-1, 1 do
+        value=multiBuffer( line*20+13+i )
+        if value == 0 then
+          break   -- end of line
+        end
+        if value > 0x80 and Menu[line].field_type == 0 then
+        -- Read field type
+          Menu[line].field_type = bitand(value, 0xF0)
+          Menu[line].field_len = bitand(value, 0x0F)
+          length = Menu[line].field_len
+          if Menu[line].field_type ~= 0xA0 and Menu[line].field_type ~= 0xC0 and Focus == -1 then
+          -- First actionnable field if nothing was selected
+            Focus = line;
+          end
+        else
+          if Menu[line].field_type == 0 then
+          -- Text
+            Menu[line].text = Menu[line].text .. string.char(value)
+          else
+          -- Menu specific fields
+            length = length - 1
+            if Menu[line].field_type == 0x80 or Menu[line].field_type == 0x90 then
+              Menu[line].field_text = Menu[line].field_text .. string.char(value)
+            else
+              Menu[line].field_value[Menu[line].field_len-length] = value
+            end
+            if length == 0 then
+            -- End of fields
+              break
+            end
+          end
+        end
+      end
+      -- Display menu text
+      if Menu[line].text ~= "" then
+        if Menu[line].field_type == 0xA0 or Menu[line].field_type == 0xB0 or Menu[line].field_type == 0xC0 or Menu[line].field_type == 0xD0 then
+          Menu[line].text = Menu[line].text .. ":"
+        end
+        if LCD_W == 480 then
+          lcd.drawText(10,32+20*line,Menu[line].text )
+        else
+          lcd.drawText(2,1+8*line,Menu[line].text,SMLSIZE)
+        end
+      end
+      -- Display specific fields
+      if line == Focus then
+        attrib = INVERS
+      else
+        attrib = 0
+      end
+      if Menu[line].field_type == 0x80 or Menu[line].field_type == 0x90 then
+      -- Text
+        if LCD_W == 480 then
+          lcd.drawText(10+9*#Menu[line].text, 32+20*line, Menu[line].field_text, attrib)
+        else
+          lcd.drawText(2+5*#Menu[line].text, 1+8*line, Menu[line].field_text, SMLSIZE + attrib)
+        end
+      elseif Menu[line].field_type == 0xA0 or Menu[line].field_type == 0xB0 then
+      -- Decimal value
+        value = 0
+        for i = 1, Menu[line].field_len, 1 do
+          value = value*256 + value
+        end
+        if LCD_W == 480 then
+          lcd.drawText(10+9*#Menu[line].text, 32+20*line, value, attrib)
+        else
+          lcd.drawText(2+5*#Menu[line].text, 1+8*line, value, SMLSIZE + attrib)
+        end
+      elseif Menu[line].field_type == 0xC0 or Menu[line].field_type == 0xD0 then
+      -- Hex value
+        text=""
+        for i = 1, Menu[line].field_len, 1 do
+          text = text .. string.format('%02X ', Menu[line].field_value[i])
+        end
+        if LCD_W == 480 then
+          lcd.drawText(10+9*#Menu[line].text, 32+20*line, text, attrib)
+        else
+          lcd.drawText(2+5*#Menu[line].text, 1+8*line, text, SMLSIZE + attrib)
+        end
+      end
+    end
+  end
+end
+
+-- Init
+local function Config_Init()
+  --Find Multi module
+  Module_int = model.getModule(0)
+  Module_ext = model.getModule(1)
+  if Module_int["Type"] ~= 6 and Module_ext["Type"] ~= 6 then
+    error("No Multi module detected...")
+    return 2
+  end
+  if Module_int["Type"] == 6 and Module_ext["Type"] == 6 then
+    error("Two Multi modules detected, turn on only the one to be configured.")
+    return 2
+  end
+  if Module_int["Type"] == 6 then
+    ModuleNumber = 0
+    ModuleType = "Internal"
+  else
+    ModuleNumber = 1
+    ModuleType = "External"
+  end
+  --Get Module settings and set it to config protocol
+  Module = model.getModule(ModuleNumber)
+  InitialProtocol = Module.protocol
+  Module.protocol = 86
+  model.setModule(ModuleNumber, Module)
+  --pause while waiting for the module to switch to config
+  for i = 0, 10, 1 do end
+
+  --Set protocol to talk to
+  multiBuffer( 0, string.byte('C') )
+  --test if value has been written
+  if multiBuffer( 0 ) ~=  string.byte('C') then
+    error("Not enough memory!")
+    return 2
+  end
+
+  --Request init of the buffer
+  multiBuffer( 4, 0xFF )
+  multiBuffer(13, 0x00 )
+
+  --Continue buffer init
+  multiBuffer( 1, string.byte('o') )
+  multiBuffer( 2, string.byte('n') )
+  multiBuffer( 3, string.byte('f') )
+
+  -- Test set
+  -- multiBuffer( 12, 0 )
+  -- multiBuffer( 13, 1 )
+  -- multiBuffer( 14, 3 )
+  -- multiBuffer( 15, 2 )
+  -- multiBuffer( 16, 62 )
+  -- multiBuffer( 17, 0 + 1*4 + 2*16 + 3*64)
+
+  -- multiBuffer( 33, string.byte('G') )
+  -- multiBuffer( 34, string.byte('l') )
+  -- multiBuffer( 35, string.byte('o') )
+  -- multiBuffer( 36, string.byte('b') )
+  -- multiBuffer( 37, string.byte('a') )
+  -- multiBuffer( 38, string.byte('l') )
+  -- multiBuffer( 39, string.byte(' ') )
+  -- multiBuffer( 40, string.byte('I') )
+  -- multiBuffer( 41, string.byte('D') )
+  -- multiBuffer( 42, 0xD0 + 4 )
+  -- multiBuffer( 43, 0x12 )
+  -- multiBuffer( 44, 0x34 )
+  -- multiBuffer( 45, 0x56 )
+  -- multiBuffer( 46, 0x78 )
+  -- multiBuffer( 47, 0x9A )
+  -- multiBuffer( 48, 0xBC )
+
+  -- multiBuffer( 53, 0x90 + 9 )
+  -- multiBuffer( 54, string.byte('R') )
+  -- multiBuffer( 55, string.byte('e') )
+  -- multiBuffer( 56, string.byte('s') )
+  -- multiBuffer( 57, string.byte('e') )
+  -- multiBuffer( 58, string.byte('t') )
+  -- multiBuffer( 59, string.byte(' ') )
+  -- multiBuffer( 60, string.byte('G') )
+  -- multiBuffer( 61, string.byte('I') )
+  -- multiBuffer( 62, string.byte('D') )
+  -- multiBuffer( 63, 0x00 )
+end
+
+-- Main
+local function Config_Run(event)
+  if event == nil then
+    error("Cannot be run as a model script!")
+    return 2
+  elseif event == EVT_VIRTUAL_EXIT then
+    Config_Release()
+    return 2
+  else
+    Config_Draw_Menu()
+    if ( event == EVT_VIRTUAL_PREV_PAGE or event == EVT_VIRTUAL_NEXT_PAGE ) and Edit < 1 then
+    -- Not editing, ok to change page
+      if event == EVT_VIRTUAL_PREV_PAGE then
+        killEvents(event)
+        if Page > 0 then
+          --Page = Page - 1
+          --Config_Page()
+        end
+      else
+        --Page = Page + 1
+        --Config_Page()
+      end
+    end
+    if Focus > 0 then
+    -- At least one line has an action
+      if Edit >= 0 then
+      -- Currently editing
+        Config_Draw_Edit( event )
+      elseif event == EVT_VIRTUAL_ENTER then
+      -- Switch to edit
+        Config_Draw_Edit( 0 )
+      elseif event == EVT_VIRTUAL_PREV or event == EVT_VIRTUAL_NEXT then
+      -- Main menu selection
+        Config_Next_Prev( event )
+      end
+    end
+    return 0
+  end
+end
+
+return { init=Config_Init, run=Config_Run }

Lua_scripts/MultiLOLI.lua

@@ -0,0 +1,221 @@
+
+local toolName = "TNS|Multi LOLI RX config|TNE"
+
+---- #########################################################################
+---- #                                                                       #
+---- # Copyright (C) OpenTX                                                  #
+-----#                                                                       #
+---- # License GPLv2: http://www.gnu.org/licenses/gpl-2.0.html               #
+---- #                                                                       #
+---- # This program is free software; you can redistribute it and/or modify  #
+---- # it under the terms of the GNU General Public License version 2 as     #
+---- # published by the Free Software Foundation.                            #
+---- #                                                                       #
+---- # This program is distributed in the hope that it will be useful        #
+---- # but WITHOUT ANY WARRANTY; without even the implied warranty of        #
+---- # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the         #
+---- # GNU General Public License for more details.                          #
+---- #                                                                       #
+---- #########################################################################
+
+local loli_nok = false
+local channels={ {  768, "PWM", 100,   102, "PPM",      50,  -768, "Servo",      0, -2048, "Switch", -100 }, -- CH1
+                 {  768, "PWM", 100,  -768, "Servo",      0, -2048, "Switch", -100 }, -- CH2
+                 { -768, "Servo",  0, -2048, "Switch", -100 }, -- CH3
+                 { -768, "Servo",  0, -2048, "Switch", -100 }, -- CH4
+                 {  102, "SBUS", 50,  -768, "Servo",      0, -2048, "Switch", -100 }, -- CH5
+                 { -768, "Servo",  0, -2048, "Switch", -100 }, -- CH6
+                 {  768, "PWM", 100,  -768, "Servo",      0, -2048, "Switch", -100 }, -- CH7
+                 { -768, "Servo",  0, -2048, "Switch", -100 } } -- CH8
+
+local sel = 1
+local edit = false
+
+local blink = 0
+local BLINK_SPEED = 15
+
+local function drawScreenTitle(title)
+    if LCD_W == 480 then
+        lcd.drawFilledRectangle(0, 0, LCD_W, 30, TITLE_BGCOLOR)
+        lcd.drawText(1, 5, title, MENU_TITLE_COLOR)
+    else
+        lcd.drawScreenTitle(title, 0, 0)
+    end
+end
+
+local function LOLI_Draw_LCD(event)
+  local line = 0
+
+  lcd.clear()
+
+  --Display settings
+  local lcd_opt = 0
+  if LCD_W == 480 then
+    drawScreenTitle("Multi - LOLI RX configuration tool")
+    x_pos = 152
+	x_inc = 90
+    y_pos = 40
+    y_inc = 20
+  else
+    x_pos = 5
+	x_inc = 30
+    y_pos = 1
+    y_inc = 8
+    lcd_opt = SMLSIZE
+  end
+
+  --Multi Module detection
+  if loli_nok then
+    if LCD_W == 480 then
+      lcd.drawText(10,50,"The LOLI protocol is not selected...", lcd_opt)
+    else
+      --Draw on LCD_W=128
+      lcd.drawText(2,17,"LOLI protocol not selected...",SMLSIZE)
+    end
+    return
+  end
+  
+  --Display current config
+  if LCD_W == 480 then
+	line = line + 1
+	lcd.drawText(x_pos, y_pos+y_inc*line -2, "Channel", lcd_opt)
+	lcd.drawText(x_pos+x_inc, y_pos+y_inc*line -2, "Function", lcd_opt)
+	lcd.drawRectangle(x_pos-4, y_pos+y_inc*line -4 , 2*x_inc +2, 188)
+	lcd.drawLine(x_pos-4, y_pos+y_inc*line +18, x_pos-4 +2*x_inc +1, y_pos+y_inc*line +18, SOLID, 0)
+	lcd.drawLine(x_pos+x_inc -5, y_pos+y_inc*line -4, x_pos+x_inc -5, y_pos+y_inc*line -5 +188, SOLID, 0)
+    line = line + 1
+  end
+  
+  local out
+  for i = 1, 8 do
+    out = getValue("ch"..(i+8))
+    lcd.drawText(x_pos, y_pos+y_inc*line, "CH"..i, lcd_opt)
+    for j = 1, #channels[i], 3 do
+      if out > channels[i][j] then
+        if sel == i then
+          invert = INVERS
+          if edit == true then
+            blink = blink + 1
+            if blink > BLINK_SPEED then
+              invert = 0
+              if blink > BLINK_SPEED * 2 then
+                blink = 0
+              end
+            end
+          end
+        else
+          invert = 0
+        end
+        lcd.drawText(x_pos+x_inc, y_pos+y_inc*line, channels[i][j+1], lcd_opt + invert)
+        break
+      end
+    end
+    line = line + 1
+  end
+end
+
+local function LOLI_Change_Value(dir)
+  local pos = 0
+  local out
+  --look for the current position
+  out = getValue("ch"..(sel+8))
+  for j = 1, #channels[sel], 3 do
+    if out > channels[sel][j] then
+	  pos = j
+	  break
+	end
+  end
+  
+  --decrement or increment
+  if dir < 0 and pos > 1 then
+    pos = pos - 3
+  elseif dir > 0 and pos + 3 < #channels[sel] then
+    pos = pos + 3
+  else
+    return
+  end
+  
+  --delete all mixers for the selected channel
+  local num_mix = model.getMixesCount(sel-1 +8)
+  for i = 1, num_mix do
+	model.deleteMix(sel-1 +8, 0);
+  end
+
+  --create new mixer
+  local source_max = getFieldInfo("cyc1")
+  
+  local val = { name = channels[sel][pos+1],
+				source = source_max.id - 1, -- MAX=100 on TX16S
+				weight = channels[sel][pos+2],
+				offset = 0,
+				switch = 0,
+				multiplex = 0,
+				curveType = 0,
+				curveValue = 0,
+				flightModes = 0,
+				carryTrim = false,
+				mixWarn = 0,
+				delayUp = 0,
+				delayDown = 0,
+				speedUp = 0,
+				speedDown = 0 }
+  model.insertMix(sel-1 +8, 0, val)
+end
+
+local function LOLI_Menu(event)
+  if event == EVT_VIRTUAL_NEXT then
+    if edit == false then
+      -- not changing a value
+      if sel < 8 then
+        sel = sel + 1
+      end
+    else
+      -- need to inc the value
+      LOLI_Change_Value(1)
+    end
+  elseif event == EVT_VIRTUAL_PREV then
+    if edit == false then
+      -- not changing a value
+      if sel > 1 then
+        sel = sel - 1
+      end
+    else
+      -- need to dec the value
+      LOLI_Change_Value(-1)
+    end
+  elseif event == EVT_VIRTUAL_ENTER then
+    if edit == false then
+      edit = true
+      blink = BLINK_SPEED
+    else
+      edit = false
+    end
+  end
+end
+
+-- Init
+local function LOLI_Init()
+  local module_conf = model.getModule(0)
+  if module_conf["Type"] ~= 6 or module_conf["protocol"] ~= 82 then
+    module_conf = model.getModule(1)
+    if module_conf["Type"] ~= 6 or module_conf["protocol"] ~= 82 then
+      loli_nok = true
+    end
+  end
+end
+
+-- Main
+local function LOLI_Run(event)
+  if event == nil then
+    error("Cannot be run as a model script!")
+    return 2
+  elseif event == EVT_VIRTUAL_EXIT then
+    return 2
+  else
+    LOLI_Menu(event)
+    LOLI_Draw_LCD(event)
+    return 0
+  end
+end
+
+return { init=LOLI_Init, run=LOLI_Run }

Lua_scripts/README.md

@@ -0,0 +1,67 @@
+# Multiprotocol TX Module OpenTX LUA scripts
+<img align="right" width=300 src="../docs/images/multi.png" />
+
+If you like this project and want to support further development please consider making a [donation](../docs/Donations.md).  
+
+<table cellspacing=0>
+  <tr>
+    <td align=center width=200><a href="https://www.paypal.com/cgi-bin/webscr?cmd=_donations&business=VF2K9T23DRY56&lc=US&item_name=DIY%20Multiprotocol&currency_code=EUR&amount=5&bn=PP%2dDonationsBF%3abtn_donate_SM%2egif%3aNonHosted"><img src="../docs/images/donate_button.png" border="0" name="submit" title="PayPal - Donate €5" alt="Donate €5"/></a><br><b>€5</b></td>
+    <td align=center width=200><a href="https://www.paypal.com/cgi-bin/webscr?cmd=_donations&business=VF2K9T23DRY56&lc=US&item_name=DIY%20Multiprotocol&currency_code=EUR&amount=10&bn=PP%2dDonationsBF%3abtn_donate_SM%2egif%3aNonHosted"><img src="../docs/images/donate_button.png" border="0" name="submit" title="PayPal - Donate €10" alt="Donate €10"/></a><br><b>€10</b></td>
+    <td align=center width=200><a href="https://www.paypal.com/cgi-bin/webscr?cmd=_donations&business=VF2K9T23DRY56&lc=US&item_name=DIY%20Multiprotocol&currency_code=EUR&amount=15&bn=PP%2dDonationsBF%3abtn_donate_SM%2egif%3aNonHosted"><img src="../docs/images/donate_button.png" border="0" name="submit" title="PayPal - Donate €15" alt="Donate €10"/></a><br><b>€15</b></td>
+    <td align=center width=200><a href="https://www.paypal.com/cgi-bin/webscr?cmd=_donations&business=VF2K9T23DRY56&lc=US&item_name=DIY%20Multiprotocol&currency_code=EUR&amount=25&bn=PP%2dDonationsBF%3abtn_donate_SM%2egif%3aNonHosted"><img src="../docs/images/donate_button.png" border="0" name="submit" title="PayPal - Donate €25" alt="Donate €25"/></a><br><b>€25</b></td>
+    <td align=center width=200><a href="https://www.paypal.com/cgi-bin/webscr?cmd=_donations&business=VF2K9T23DRY56&lc=US&item_name=DIY%20Multiprotocol&currency_code=EUR&bn=PP%2dDonationsBF%3abtn_donate_SM%2egif%3aNonHosted"><img src="../docs/images/donate_button.png" border="0" name="submit" title="PayPal - Donate" alt="Donate"/></a><br><b>Other</b></td>
+  </tr>
+</table>
+
+## MultiConfig
+
+Enables to modify on a Multi module the Global ID, Cyrf ID or format the EEPROM.
+
+Notes:
+- Supported from Multi v1.3.2.85 or above and OpenTX 2.3.12 or above
+- The Multi module to be configured must be active, if there is a second Multi module in the radio it must be off
+- Located on the radio SD card under \SCRIPTS\TOOLS
+
+[![MultiCconfig](https://img.youtube.com/vi/lGyCV2kpqHU/0.jpg)](https://www.youtube.com/watch?v=lGyCV2kpqHU)
+
+## MultiChannelsUpdater
+
+Automatically name the channels based on the loaded Multi protocol and sub protocol including the module channel order convention.
+
+Need OpenTX 2.3.9 or above. Located on the radio SD card under \SCRIPTS\TOOLS. This script needs MultiChan.txt to be present in the same folder.
+
+[![MultiChannelsUpdater](https://img.youtube.com/vi/L58ayXuewyA/0.jpg)](https://www.youtube.com/watch?v=L58ayXuewyA)
+
+## MultiLOLI
+
+Script to set the channels function (switch, servo, pwm, ppm, sbus) on a [LOLI RX](https://github.com/pascallanger/DIY-Multiprotocol-TX-Module/blob/master/Protocols_Details.md#loli---82)
+
+[![MultiLOLIconfig](https://img.youtube.com/vi/e698pQxfv-A/0.jpg)](https://www.youtube.com/watch?v=e698pQxfv-A)
+
+## Graupner HoTT
+
+Enable text configuration of the HoTT RX and sensors: Vario, GPS, ESC, GAM and EAM.
+
+Need OpenTX 2.3.9 or above. Located on the radio SD card under \SCRIPTS\TOOLS.
+
+Notes:
+- Menu/MDL/Model is used to cycle through the detected sensors.
+- It's normal to lose the telemetry feed while using the text mode configuration. Telemetry will resume properly if the script is exited by doing a short press on the exit button.
+
+[![Text mode video](https://img.youtube.com/vi/81wd8NlF3Qw/0.jpg)](https://www.youtube.com/watch?v=81wd8NlF3Qw)
+
+## DSM Forward Programming
+
+This is a work in progress. It's only available for color screens (Horus, TX16S, T16, T18...).
+
+If some text appears as Unknown_xxx, please report xxx and what the exact text display should be.
+
+Need OpenTX 2.3.10 nightly or above. Located on the radio SD card under \SCRIPTS\TOOLS.
+
+[![DSM Forward Programming](https://img.youtube.com/vi/sjIaDw5j9nE/0.jpg)](https://www.youtube.com/watch?v=sjIaDw5j9nE)
+
+## DSM PID Flight log gain parameters for Blade micros
+
+Lua telemetry script from [feathering on RCGroups](https://www.rcgroups.com/forums/showpost.php?p=46033341&postcount=20728) to facilitate setting the Gain Parameters on the Blade 150S FBL. It doesn't use Forward Programming but instead it just reads telemetry data from the Multi-module and displays it on a telemetry display.
+
+It is very similar to the Telemetry Based Text Generator functionality on Spektrum transmitters where one doesn't need to rely on the angle of the swashplate to determine selection/value.

Lua_scripts/pidDsm.lua

@@ -0,0 +1,127 @@
+--
+-- This telemetry script displays the Flight Log Gain
+-- Parameters streamed from the Blade 150S Spektrum AR6335A
+-- Flybarless Controller.
+
+-- The script facilitates the setting of the FBL's
+-- Gain Parameters including PID  for both
+-- cyclic and tail.  It is similar to the Telemetry Based
+-- Text Generator available on Spektrum transmitters.
+
+-- Supporting similar Blade micros such as the Fusion 180
+-- would possibly require minor modifications to this script. 
+
+-- This script reads telemetry data from the Spektrum
+-- receiver and thus functionality relies on data being
+-- captured by the OpenTX transmitter.  A DSM
+-- telemetry-ready module is required.  Please see the
+-- MULTI-Module project at https://www.multi-module.org/.
+
+-- The only supported display is the Taranis'.  It may work
+-- with higher res screens.
+--
+
+
+-- Sensor names
+local PSensor = "FdeA"
+local ISensor = "FdeB"
+local DSensor = "FdeL"
+local RSensor = "FdeR"
+local ActiveParamSensor = "Hold"
+
+local tags = {"P", "I", "D"}
+
+
+local function getPage(iParam)
+  -- get page from 0-based index
+  -- {0,1,2,3}: cyclic (1), {4,5,6,7}: tail (2)
+  local res = (math.floor(iParam/4)==0) and 1 or 2
+  return res
+end
+
+function round(v)
+  -- round float
+  local factor = 100
+  return math.floor(v * factor + 0.5) / factor
+end
+
+
+local function readValue(sensor)
+  -- read from sensor, round and return
+  local v = getValue(sensor)
+  v = round(v)
+  return v
+end
+ 
+local function readActiveParamValue(sensor)
+  --  read and return a validated active parameter value
+  local v = getValue(sensor)
+  if (v<1 or v>8) then
+    return nil
+  end
+  return v
+end
+   
+local function readParameters()
+  -- read and return parameters
+  local p = readValue(PSensor)
+  local i = readValue(ISensor)
+  local d = readValue(DSensor)
+  local r = readValue(RSensor)
+  local a = readActiveParamValue(ActiveParamSensor)
+  return {p,i,d,r,a}
+end
+
+local function drawParameters()
+  -- draw labels and params on screen
+  local params = readParameters()
+  local activeParam = params[5]
+  
+  -- if active gain does not validate then assume
+  -- Gain Adjustment Mode is disabled
+  if not activeParam then
+    lcd.clear()
+    lcd.drawText(20,30,"Please enter Gain Adjustment Mode")
+    return
+  end
+  
+  local activePage = getPage(activeParam-1)
+  for iParam=0,7 do
+    -- highlight selected parameter
+    local attr = (activeParam==iParam+1) and 2 or 0
+    -- circular index (per page)
+    local perPageIndx = iParam % 4 + 1
+    -- check if displaying cyclic params.
+    local isCyclicPage = (getPage(iParam)==1)
+    -- set y draw coord
+    local y = perPageIndx*10+2
+    
+    -- labels
+    local x = isCyclicPage and 6 or 120
+    -- labels are P,I,D for both pages except for last param
+    local val = iParam==3 and "Response" or
+                  (iParam==7 and "Filtering" or tags[perPageIndx])
+    lcd.drawText (x, y, val, attr)
+    
+    -- gains
+    -- set all params for non-active page to '--' rather than 'last value'
+    val = (getPage(iParam)==activePage) and params[perPageIndx] or '--'
+    x = isCyclicPage and 70 or 180
+    lcd.drawText (x, y, val, attr)
+  end
+end
+
+
+local function run_func(event)
+  -- TODO: calling clear() on every function call redrawing all labels is not ideal
+  lcd.clear()
+  lcd.drawText (8, 2, "Cyclic (0...200)")
+  lcd.drawText (114, 2, "Tail (0...200)")
+  drawParameters()
+end
+
+local function init_func() end
+local function bg_func() end
+
+
+return { run=run_func, background=bg_func, init=init_func  }

Multiprotocol/A7105_SPI.ino

@@ -27,13 +27,16 @@ void A7105_WriteData(uint8_t len, uint8_t channel)
 	for (i = 0; i < len; i++)
 		SPI_Write(packet[i]);
 	A7105_CSN_on;
-	if(protocol!=PROTO_FLYSKY)
+	if(protocol!=PROTO_WFLY2)
 	{
-		A7105_Strobe(A7105_STANDBY);	//Force standby mode, ie cancel any TX or RX...
-		A7105_SetTxRxMode(TX_EN);		//Switch to PA
+		if(!(protocol==PROTO_FLYSKY || (protocol==PROTO_KYOSHO && sub_protocol==KYOSHO_HYPE)))
+		{
+			A7105_Strobe(A7105_STANDBY);	//Force standby mode, ie cancel any TX or RX...
+			A7105_SetTxRxMode(TX_EN);		//Switch to PA
+		}
+		A7105_WriteReg(A7105_0F_PLL_I, channel);
+		A7105_Strobe(A7105_TX);
 	}
-	A7105_WriteReg(A7105_0F_PLL_I, channel);
-	A7105_Strobe(A7105_TX);
 }
 
 void A7105_ReadData(uint8_t len)
@@ -107,7 +110,7 @@ void A7105_WriteID(uint32_t ida)
 {
 	A7105_CSN_off;
 	SPI_Write(A7105_06_ID_DATA);			//ex id=0x5475c52a ;txid3txid2txid1txid0
-	SPI_Write((ida>>24)&0xff);				//53 
+	SPI_Write((ida>>24)&0xff);				//54 
 	SPI_Write((ida>>16)&0xff);				//75
 	SPI_Write((ida>>8)&0xff);				//c5
 	SPI_Write((ida>>0)&0xff);				//2a
@@ -192,9 +195,9 @@ void A7105_AdjustLOBaseFreq(uint8_t cmd)
 					offset=(int16_t)FORCE_FLYSKY_TUNING;
 				#endif
 				break;
-			case PROTO_FLYZONE:
-				#ifdef FORCE_FLYZONE_TUNING
-					offset=(int16_t)FORCE_FLYZONE_TUNING;
+			case PROTO_HEIGHT:
+				#ifdef FORCE_HEIGHT_TUNING
+					offset=(int16_t)FORCE_HEIGHT_TUNING;
 				#endif
 				break;
 			case PROTO_PELIKAN:
@@ -202,6 +205,21 @@ void A7105_AdjustLOBaseFreq(uint8_t cmd)
 					offset=(int16_t)FORCE_PELIKAN_TUNING;
 				#endif
 				break;
+			case PROTO_KYOSHO:
+				#ifdef FORCE_KYOSHO_TUNING
+					offset=(int16_t)FORCE_KYOSHO_TUNING;
+				#endif
+				break;
+			case PROTO_JOYSWAY:
+				#ifdef FORCE_JOYSWAY_TUNING
+					offset=(int16_t)FORCE_JOYSWAY_TUNING;
+				#endif
+				break;
+			case PROTO_WFLY2:
+				#ifdef FORCE_WFLY2_TUNING
+					offset=(int16_t)FORCE_WFLY2_TUNING;
+				#endif
+				break;
 			case PROTO_AFHDS2A:
 			case PROTO_AFHDS2A_RX:
 				#ifdef FORCE_AFHDS2A_TUNING
@@ -211,7 +229,7 @@ void A7105_AdjustLOBaseFreq(uint8_t cmd)
 		}
 	}
 	if(offset==1024)	// Use channel 15 as an input
-		offset=convert_channel_16b_nolimit(CH15,-300,300);
+		offset=convert_channel_16b_nolimit(CH15,-300,300,false);
 
 	if(old_offset==offset)	// offset is the same as before...
 			return;
@@ -282,8 +300,8 @@ const uint8_t PROGMEM FLYSKY_A7105_regs[] = {
 	0x01, 0x0f // 30 - 31
 };
 #endif
-#ifdef FLYZONE_A7105_INO
-const uint8_t PROGMEM FLYZONE_A7105_regs[] = {
+#ifdef HEIGHT_A7105_INO
+const uint8_t PROGMEM HEIGHT_A7105_regs[] = {
 	0xff, 0x42, 0x00, 0x07, 0x00, 0xff, 0xff ,0x00, 0x00, 0x00, 0x00, 0x01, 0x21, 0x05, 0x01, 0x50,	// 00 - 0f
 	0x9e, 0x4b, 0x00, 0x02, 0x16, 0x2b, 0x12, 0x00, 0x62, 0x80, 0x80, 0x00, 0x0a, 0x32, 0xc3, 0x1f,	// 10 - 1f
 	0x12, 0x00, 0x00, 0xff, 0x00, 0x00, 0x3a, 0x00, 0x3f, 0x47, 0x80, 0x03, 0x01, 0x45, 0x18, 0x00,	// 20 - 2f
@@ -306,6 +324,36 @@ const uint8_t PROGMEM PELIKAN_A7105_regs[] = {
 	0x01, 0x0f // 30 - 31
 };
 #endif
+#ifdef KYOSHO_A7105_INO
+const uint8_t PROGMEM KYOSHO_A7105_regs[] = {
+	0xff, 0x42, 0xff, 0x25, 0x00, 0xff, 0xff ,0x00, 0x00, 0x00, 0x00, 0x01, 0x21, 0x05, 0x00, 0x50,	// 00 - 0f
+	0x9e, 0x4b, 0x00, 0x02, 0x16, 0x2b, 0x12, 0x40, 0x62, 0x80, 0x80, 0x00, 0x0a, 0x32, 0x03, 0x1f,	// 10 - 1f
+	0x1e, 0x00, 0x00, 0xff, 0x00, 0x00, 0x23, 0x70, 0x1F, 0x47, 0x80, 0x57, 0x01, 0x45, 0x19, 0x00,	// 20 - 2f
+	0x01, 0x0f // 30 - 31
+};
+const uint8_t PROGMEM KYOSHO_HYPE_A7105_regs[] = {
+	0xff, 0x42, 0x00, 0x10, 0xC0, 0xff, 0xff ,0x00, 0x00, 0x00, 0x00, 0x01, 0x09, 0x05, 0x01, 0x04,	// 00 - 0f
+	0x9e, 0x4b, 0x00, 0x02, 0x16, 0x2b, 0x12, 0x00, 0x62, 0x80, 0x80, 0x00, 0x0a, 0x96, 0xc2, 0x1f,	// 10 - 1f
+	0x12, 0x00, 0x00, 0xff, 0x00, 0x00, 0x3a, 0x00, 0x17, 0x47, 0x80, 0x03, 0x01, 0x45, 0x18, 0x00,	// 20 - 2f
+	0x01, 0x0f // 30 - 31
+};
+#endif
+#ifdef WFLY2_A7105_INO //A7106 values
+const uint8_t PROGMEM WFLY2_A7105_regs[] = {
+	0xff, 0x62, 0xff, 0x1F, 0x40, 0xff, 0xff ,0x00, 0x00, 0x00, 0x00, 0x33, 0x33, 0x05, 0x00, 0x64,	// 00 - 0f Changes: 0B:19->33, 0C:01,33
+	0x9e, 0x4b, 0x00, 0x02, 0x16, 0x2b, 0x12, 0x40, 0x62, 0x80, 0x80, 0x00, 0x0a, 0x32, 0x03, 0x0f,	// 10 - 1f 1C:4A->0A
+	0x12, 0x00, 0x00, 0xff, 0x00, 0x00, 0x23, 0x70, 0x15, 0x47, 0x80, 0x03, 0x01, 0x45, 0x18, 0x00,	// 20 - 2f 2B:77->03, 2E:19->18
+	0x01, 0x0f // 30 - 31
+};
+#endif
+#ifdef JOYSWAY_A7105_INO
+const uint8_t PROGMEM JOYSWAY_A7105_regs[] = {
+	0xff, 0x62, 0xff, 0x0F, 0x00, 0xff, 0xff ,0x00, 0x00, 0x05, 0x00, 0x01, 0x00, 0xF5, 0x00, 0x15,	// 00 - 0f
+	0x9E, 0x4B, 0x00, 0x03, 0x56, 0x2B, 0x12, 0x4A, 0x02, 0x80, 0x80, 0x00, 0x0E, 0x91, 0x03, 0x0F,	// 10 - 1f
+	0x16, 0x2A, 0x00, 0xff, 0xff, 0xff, 0x3A, 0x06, 0x1F, 0x47, 0x80, 0x01, 0x05, 0x45, 0x18, 0x00,	// 20 - 2f
+	0x01, 0x0f // 30 - 31
+};
+#endif
 
 #define ID_NORMAL 0x55201041
 #define ID_PLUS   0xAA201041
@@ -314,10 +362,24 @@ void A7105_Init(void)
 	uint8_t *A7105_Regs=0;
     uint8_t vco_calibration0, vco_calibration1;
 	
-	#ifdef FLYZONE_A7105_INO
-		if(protocol==PROTO_FLYZONE)
+	#ifdef JOYSWAY_A7105_INO
+		if(protocol==PROTO_JOYSWAY)
 		{
-			A7105_Regs=(uint8_t*)FLYZONE_A7105_regs;
+			A7105_Regs=(uint8_t*)JOYSWAY_A7105_regs;
+		}
+		else
+	#endif
+	#ifdef WFLY2_A7105_INO
+		if(protocol==PROTO_WFLY2)
+		{
+			A7105_Regs=(uint8_t*)WFLY2_A7105_regs;
+		}
+		else
+	#endif
+	#ifdef HEIGHT_A7105_INO
+		if(protocol==PROTO_HEIGHT)
+		{
+			A7105_Regs=(uint8_t*)HEIGHT_A7105_regs;
 			A7105_WriteID(0x25A53C45);
 		}
 		else
@@ -348,13 +410,20 @@ void A7105_Init(void)
 			#ifdef FLYSKY_A7105_INO
 				if(protocol==PROTO_FLYSKY)
 					A7105_Regs=(uint8_t*)FLYSKY_A7105_regs;
-				else
 			#endif
+			#if defined(AFHDS2A_A7105_INO) || defined(AFHDS2A_RX_A7105_INO)
+				if(protocol==PROTO_AFHDS2A || protocol==PROTO_AFHDS2A_RX)
+					A7105_Regs=(uint8_t*)AFHDS2A_A7105_regs;
+			#endif
+			#ifdef KYOSHO_A7105_INO
+				if(protocol==PROTO_KYOSHO)
 				{
-					#if defined(AFHDS2A_A7105_INO) || defined(AFHDS2A_RX_A7105_INO)
-						A7105_Regs=(uint8_t*)AFHDS2A_A7105_regs;
-					#endif
+					if(sub_protocol==KYOSHO_FHSS)
+						A7105_Regs=(uint8_t*)KYOSHO_A7105_regs;
+					else
+						A7105_Regs=(uint8_t*)KYOSHO_HYPE_A7105_regs;
 				}
+			#endif
 		}
 
 	for (uint8_t i = 0; i < 0x32; i++)
@@ -368,59 +437,86 @@ void A7105_Init(void)
 				if(i==0x20) val=0x1E;
 			}
 		#endif
-		if( val != 0xFF)
+		#ifdef HEIGHT_A7105_INO
+			if(protocol==PROTO_HEIGHT && sub_protocol==HEIGHT_8CH)
+				if(i==0x03) val=0x0A;
+		#endif
+		if( val != 0xff)
 			A7105_WriteReg(i, val);
 	}
 	A7105_Strobe(A7105_STANDBY);
 
-	//IF Filter Bank Calibration
-	A7105_WriteReg(A7105_02_CALC,1);
-	while(A7105_ReadReg(A7105_02_CALC));			// Wait for calibration to end
-//	A7105_ReadReg(A7105_22_IF_CALIB_I);
-//	A7105_ReadReg(A7105_24_VCO_CURCAL);
-
-	if(protocol!=PROTO_HUBSAN)
-	{
-		//VCO Current Calibration
-		A7105_WriteReg(A7105_24_VCO_CURCAL,0x13);	//Recommended calibration from A7105 Datasheet
-		//VCO Bank Calibration
-		A7105_WriteReg(A7105_26_VCO_SBCAL_II,0x3b);	//Recommended calibration from A7105 Datasheet
+	if(protocol==PROTO_KYOSHO && sub_protocol==KYOSHO_FHSS)
+	{//strange calibration...
+		//IF Filter Bank Calibration
+		A7105_WriteReg(A7105_02_CALC,0x0F);
+		while(A7105_ReadReg(A7105_02_CALC));			// Wait for calibration to end
+	//	A7105_ReadReg(A7105_22_IF_CALIB_I);
+	//	A7105_ReadReg(A7105_24_VCO_CURCAL);
+	//	A7105_ReadReg(25_VCO_SBCAL_I);
+	//	A7105_ReadReg(1A_RX_GAIN_II);
+	//	A7105_ReadReg(1B_RX_GAIN_III);
 	}
-
-	//VCO Bank Calibrate channel 0
-	A7105_WriteReg(A7105_0F_CHANNEL, 0);
-	A7105_WriteReg(A7105_02_CALC,2);
-	while(A7105_ReadReg(A7105_02_CALC));			// Wait for calibration to end
-	vco_calibration0 = A7105_ReadReg(A7105_25_VCO_SBCAL_I);
-	
-	//VCO Bank Calibrate channel A0
-	A7105_WriteReg(A7105_0F_CHANNEL, 0xa0);
-	A7105_WriteReg(A7105_02_CALC, 2);
-	while(A7105_ReadReg(A7105_02_CALC));			// Wait for calibration to end
-	vco_calibration1 = A7105_ReadReg(A7105_25_VCO_SBCAL_I);
-
-	if(protocol==PROTO_BUGS)
-		A7105_SetVCOBand(vco_calibration0 & 0x07, vco_calibration1 & 0x07);	// Set calibration band value to best match
 	else
+	{
+		//IF Filter Bank Calibration
+		A7105_WriteReg(A7105_02_CALC,1);
+		while(A7105_ReadReg(A7105_02_CALC));			// Wait for calibration to end
+	//	A7105_ReadReg(A7105_22_IF_CALIB_I);
+	//	A7105_ReadReg(A7105_24_VCO_CURCAL);
+
 		if(protocol!=PROTO_HUBSAN)
 		{
-			switch(protocol)
-			{
-				case PROTO_FLYSKY:
-					vco_calibration1=0x08;
-					break;
-				case PROTO_FLYZONE:
-					vco_calibration1=0x02;
-					break;
-				case PROTO_PELIKAN:
-					vco_calibration1=0x0C;
-					break;
-				default:
-					vco_calibration1=0x0A;
-					break;
-			}
-			A7105_WriteReg(A7105_25_VCO_SBCAL_I,vco_calibration1);	//Reset VCO Band calibration
+			//VCO Current Calibration
+			A7105_WriteReg(A7105_24_VCO_CURCAL,0x13);	//Recommended calibration from A7105 Datasheet
+			//VCO Bank Calibration
+			A7105_WriteReg(A7105_26_VCO_SBCAL_II,0x3b);	//Recommended calibration from A7105 Datasheet
 		}
+
+		//VCO Bank Calibrate channel 0
+		A7105_WriteReg(A7105_0F_CHANNEL, 0);
+		A7105_WriteReg(A7105_02_CALC,2);
+		while(A7105_ReadReg(A7105_02_CALC));			// Wait for calibration to end
+		vco_calibration0 = A7105_ReadReg(A7105_25_VCO_SBCAL_I);
+		
+		//VCO Bank Calibrate channel A0
+		A7105_WriteReg(A7105_0F_CHANNEL, 0xa0);
+		A7105_WriteReg(A7105_02_CALC, 2);
+		while(A7105_ReadReg(A7105_02_CALC));			// Wait for calibration to end
+		vco_calibration1 = A7105_ReadReg(A7105_25_VCO_SBCAL_I);
+
+		if(protocol==PROTO_BUGS || protocol==PROTO_WFLY2)
+			A7105_SetVCOBand(vco_calibration0 & 0x07, vco_calibration1 & 0x07);	// Set calibration band value to best match
+		else
+			if(protocol!=PROTO_HUBSAN)
+			{
+				switch(protocol)
+				{
+					case PROTO_FLYSKY:
+						vco_calibration1=0x08;
+						break;
+					case PROTO_HEIGHT:
+						vco_calibration1=0x02;
+						break;
+					case PROTO_PELIKAN:
+						if(sub_protocol == PELIKAN_SCX24)
+						{
+							vco_calibration1=0x0A;
+							break;
+						}
+					case PROTO_KYOSHO: //sub_protocol Hype
+						vco_calibration1=0x0C;
+						break;
+					case PROTO_JOYSWAY:
+						vco_calibration1=0x09;
+						break;
+					default:
+						vco_calibration1=0x0A;
+						break;
+				}
+				A7105_WriteReg(A7105_25_VCO_SBCAL_I,vco_calibration1);	//Reset VCO Band calibration
+			}
+	}
 	A7105_SetTxRxMode(TX_EN);
 	A7105_SetPower();
 

Multiprotocol/AFHDS2A_Rx_a7105.ino

@@ -24,10 +24,11 @@
 enum {
 	AFHDS2A_RX_BIND1,
 	AFHDS2A_RX_BIND2,
+	AFHDS2A_RX_BIND3,
 	AFHDS2A_RX_DATA
 };
 
-static void __attribute__((unused)) AFHDS2A_Rx_build_telemetry_packet()
+static void __attribute__((unused)) AFHDS2A_RX_build_telemetry_packet()
 {
 	uint32_t bits = 0;
 	uint8_t bitsavailable = 0;
@@ -39,7 +40,7 @@ static void __attribute__((unused)) AFHDS2A_Rx_build_telemetry_packet()
 	packet_in[idx++] = 14; // number of channels in packet
 	// pack channels
 	for (uint8_t i = 0; i < 14; i++) {
-		uint32_t val = packet[9+i*2] | (packet[10+i*2] << 8);
+		uint32_t val = packet[9+i*2] | (((packet[10+i*2])&0x0F) << 8);
 		if (val < 860)
 			val = 860;
 		// convert ppm (860-2140) to Multi (0-2047)
@@ -55,13 +56,13 @@ static void __attribute__((unused)) AFHDS2A_Rx_build_telemetry_packet()
 	}
 }
 
-static uint8_t __attribute__((unused)) AFHDS2A_Rx_data_ready()
+static uint8_t __attribute__((unused)) AFHDS2A_RX_data_ready()
 {
 	// check if FECF+CRCF Ok
 	return !(A7105_ReadReg(A7105_00_MODE) & (1 << 5 | 1 << 6 | 1 << 0));
 }
 
-uint16_t initAFHDS2A_Rx()
+void AFHDS2A_RX_init()
 {
 	uint8_t i;
 	A7105_Init();
@@ -83,15 +84,12 @@ uint16_t initAFHDS2A_Rx()
 			hopping_frequency[i] = eeprom_read_byte((EE_ADDR)temp++);
 		phase = AFHDS2A_RX_DATA;
 	}
-	return 1000;
 }
 
 #define AFHDS2A_RX_WAIT_WRITE 0x80
 
-uint16_t AFHDS2A_Rx_callback()
+uint16_t AFHDS2A_RX_callback()
 {
-	static uint32_t pps_timer = 0;
-	static uint16_t pps_counter = 0;
 	static int8_t read_retry;
 	int16_t temp;
 	uint8_t i;
@@ -106,22 +104,33 @@ uint16_t AFHDS2A_Rx_callback()
 
 	switch(phase) {
 	case AFHDS2A_RX_BIND1:
-		if (AFHDS2A_Rx_data_ready()) {
+		if(IS_BIND_DONE)
+		{
+			AFHDS2A_RX_init();	// Abort bind
+			break;
+		}
+		debugln("bind p=%d", phase+1);
+		if (AFHDS2A_RX_data_ready()) {
 			A7105_ReadData(AFHDS2A_RX_TXPACKET_SIZE);
 			if ((packet[0] == 0xbb && packet[9] == 0x01) ||	(packet[0] == 0xbc && packet[9] <= 0x02)) {
 				memcpy(rx_id, &packet[1], 4); // TX id actually
 				memcpy(hopping_frequency, &packet[11], AFHDS2A_RX_NUMFREQ);
 				phase = AFHDS2A_RX_BIND2;
+				debugln("phase bind2");
 			}
 		}
 		A7105_WriteReg(A7105_0F_PLL_I, (packet_count++ & 1) ? 0x0D : 0x8C); // bind channels
-		A7105_SetTxRxMode(RX_EN);
 		A7105_Strobe(A7105_RX);
 		return 10000;
 
 	case AFHDS2A_RX_BIND2:
+		if(IS_BIND_DONE)
+		{
+			AFHDS2A_RX_init();	// Abort bind
+			break;
+		}
 		// got 2nd bind packet from tx ?
-		if (AFHDS2A_Rx_data_ready()) {
+		if (AFHDS2A_RX_data_ready()) {
 			A7105_ReadData(AFHDS2A_RX_TXPACKET_SIZE);
 			if ((packet[0] == 0xBC && packet[9] == 0x02 && packet[10] == 0x00) &&
 				(memcmp(rx_id, &packet[1], 4) == 0) &&
@@ -132,42 +141,58 @@ uint16_t AFHDS2A_Rx_callback()
 					eeprom_write_byte((EE_ADDR)temp++, rx_id[i]);
 				for (i = 0; i < AFHDS2A_RX_NUMFREQ; i++)
 					eeprom_write_byte((EE_ADDR)temp++, hopping_frequency[i]);
-				BIND_DONE;
-				phase = AFHDS2A_RX_DATA;
-				return 3850;
+				phase = AFHDS2A_RX_BIND3;
+				debugln("phase bind3");
+				packet_count = 0;
 			}
 		}
 
+	case AFHDS2A_RX_BIND3:
+		debugln("bind p=%d", phase+1);
 		// transmit response packet
 		packet[0] = 0xBC;
 		memcpy(&packet[1], rx_id, 4);
 		memcpy(&packet[5], rx_tx_addr, 4);
-		packet[9] = 0x01;
+		//packet[9] = 0x01;
 		packet[10] = 0x00;
 		memset(&packet[11], 0xFF, 26);
+		A7105_SetTxRxMode(TX_EN);
+		rx_disable_lna = !IS_POWER_FLAG_on;
 		A7105_WriteData(AFHDS2A_RX_RXPACKET_SIZE, packet_count++ & 1 ? 0x0D : 0x8C);
+		if(phase == AFHDS2A_RX_BIND3 && packet_count > 20)
+		{
+			debugln("done");
+			BIND_DONE;
+			AFHDS2A_RX_init();	// Restart protocol
+			break;
+		}
 		phase |= AFHDS2A_RX_WAIT_WRITE;
 		return 1700;
 	
 	case AFHDS2A_RX_BIND2 | AFHDS2A_RX_WAIT_WRITE:
 		//Wait for TX completion
 		pps_timer = micros();
-		while (micros() - pps_timer < 700) // Wait max 700µs, using serial+telemetry exit in about 120µs
+		while ((uint32_t)(micros() - pps_timer) < 700) // Wait max 700µs, using serial+telemetry exit in about 120µs
 			if (!(A7105_ReadReg(A7105_00_MODE) & 0x01))
 				break;
 		A7105_Strobe(A7105_RX);
+	case AFHDS2A_RX_BIND3 | AFHDS2A_RX_WAIT_WRITE:
 		phase &= ~AFHDS2A_RX_WAIT_WRITE;
 		return 10000;
 	
 	case AFHDS2A_RX_DATA:
-		if (AFHDS2A_Rx_data_ready()) {
+		if (AFHDS2A_RX_data_ready()) {
 			A7105_ReadData(AFHDS2A_RX_TXPACKET_SIZE);
 			if (memcmp(&packet[1], rx_id, 4) == 0 && memcmp(&packet[5], rx_tx_addr, 4) == 0) {
-				if (packet[0] == 0x58 && packet[37] == 0x00 && telemetry_link == 0) { // standard packet, send channels to TX
+				if (packet[0] == 0x58 && packet[37] == 0x00 && (telemetry_link&0x7F) == 0) { // standard packet, send channels to TX
 					int rssi = min(A7105_ReadReg(A7105_1D_RSSI_THOLD),160);
 					RX_RSSI = map16b(rssi, 160, 8, 0, 128);
-					AFHDS2A_Rx_build_telemetry_packet();
+					AFHDS2A_RX_build_telemetry_packet();
 					telemetry_link = 1;
+					#ifdef SEND_CPPM
+						if(sub_protocol>0)
+							telemetry_link |= 0x80;	// Disable telemetry output
+					#endif
 				}
 				rx_data_started = true;
 				read_retry = 10; // hop to next channel

Multiprotocol/AFHDS2A_a7105.ino

@@ -20,6 +20,10 @@
 #define AFHDS2A_RXPACKET_SIZE	37
 #define AFHDS2A_NUMFREQ			16
 
+#if not defined TELEMETRY
+	uint8_t RX_LQI=0;
+#endif
+
 enum{
 	AFHDS2A_PACKET_STICKS,
 	AFHDS2A_PACKET_SETTINGS,
@@ -65,7 +69,6 @@ static void AFHDS2A_calc_channels()
 	}
 }
 
-#if defined(AFHDS2A_FW_TELEMETRY) || defined(AFHDS2A_HUB_TELEMETRY)
 // telemetry sensors ID
 enum{
 	AFHDS2A_SENSOR_RX_VOLTAGE   = 0x00,
@@ -76,10 +79,9 @@ enum{
 	AFHDS2A_SENSOR_A3_VOLTAGE   = 0x03,
 };
 
+#if defined(AFHDS2A_FW_TELEMETRY) || defined(AFHDS2A_HUB_TELEMETRY)
 static void AFHDS2A_update_telemetry()
 {
-	if(packet[0]==0xAA && packet[9]==0xFD)
-		return;	// ignore packets which contain the RX configuration: FD FF 32 00 01 00 FF FF FF 05 DC 05 DE FA FF FF FF FF FF FF FF FF FF FF FF FF FF FF
 	// Read TX RSSI
 	int16_t temp=256-(A7105_ReadReg(A7105_1D_RSSI_THOLD)*8)/5;		// value from A7105 is between 8 for maximum signal strength to 160 or less
 	if(temp<0) temp=0;
@@ -183,37 +185,64 @@ static void AFHDS2A_build_packet(uint8_t type)
 	{
 		case AFHDS2A_PACKET_STICKS:		
 			packet[0] = 0x58;
-			for(uint8_t ch=0; ch<14; ch++)
+			//16 channels + RX_LQI on channel 17
+			for(uint8_t ch=0; ch<num_ch; ch++)
 			{
-				uint16_t channelMicros = convert_channel_ppm(CH_AETR[ch]);
-				packet[9 +  ch*2] = channelMicros&0xFF;
-				packet[10 + ch*2] = (channelMicros>>8)&0xFF;
+				if(ch == 16 // CH17=RX_LQI
+				#ifdef AFHDS2A_LQI_CH
+					|| ch == (AFHDS2A_LQI_CH-1)	// override channel with LQI
+				#endif
+					)
+					val = 2000 - 10*RX_LQI;
+				else
+					val = convert_channel_ppm(CH_AETR[ch]);
+				if(ch<14)
+				{
+					packet[9 +  ch*2] = val;
+					packet[10 + ch*2] = (val>>8)&0x0F;
+				}
+				else
+				{
+					packet[10 + (ch-14)*6] |= (val)<<4;
+					packet[12 + (ch-14)*6] |= (val)&0xF0;
+					packet[14 + (ch-14)*6] |= (val>>4)&0xF0;
+				}
 			}
-			#ifdef AFHDS2A_LQI_CH
-				// override channel with LQI
-				val = 2000 - 10*RX_LQI;
-				packet[9+((AFHDS2A_LQI_CH-1)*2)] = val & 0xff;
-				packet[10+((AFHDS2A_LQI_CH-1)*2)] = (val >> 8) & 0xff;
-			#endif
 			break;
 		case AFHDS2A_PACKET_FAILSAFE:
 			packet[0] = 0x56;
-			for(uint8_t ch=0; ch<14; ch++)
+			for(uint8_t ch=0; ch<num_ch; ch++)
 			{
 				#ifdef FAILSAFE_ENABLE
-					uint16_t failsafeMicros = Failsafe_data[CH_AETR[ch]];
-					if( failsafeMicros!=FAILSAFE_CHANNEL_HOLD && failsafeMicros!=FAILSAFE_CHANNEL_NOPULSES)
+					if(ch<16)
+						val = Failsafe_data[CH_AETR[ch]];
+					else
+						val = FAILSAFE_CHANNEL_NOPULSES;
+					if(val!=FAILSAFE_CHANNEL_HOLD && val!=FAILSAFE_CHANNEL_NOPULSES)
 					{ // Failsafe values
-						failsafeMicros = (((failsafeMicros<<2)+failsafeMicros)>>3)+860;
-						packet[9 + ch*2] =  failsafeMicros & 0xff;
-						packet[10+ ch*2] = ( failsafeMicros >> 8) & 0xff;
+						val = (((val<<2)+val)>>3)+860;
+						if(ch<14)
+						{
+							packet[9 +  ch*2] = val;
+							packet[10 + ch*2] = (val>>8)&0x0F;
+						}
+						else
+						{
+							packet[10 + (ch-14)*6] &= 0x0F;
+							packet[10 + (ch-14)*6] |= (val)<<4;
+							packet[12 + (ch-14)*6] &= 0x0F;
+							packet[12 + (ch-14)*6] |= (val)&0xF0;
+							packet[14 + (ch-14)*6] &= 0x0F;
+							packet[14 + (ch-14)*6] |= (val>>4)&0xF0;
+						}
 					}
 					else
 				#endif
-					{ // no values
-						packet[9 + ch*2] = 0xff;
-						packet[10+ ch*2] = 0xff;
-					}
+						if(ch<14)
+						{ // no values
+							packet[9 + ch*2] = 0xff;
+							packet[10+ ch*2] = 0xff;
+						}
 			}
 			break;
 		case AFHDS2A_PACKET_SETTINGS:
@@ -224,17 +253,14 @@ static void AFHDS2A_build_packet(uint8_t type)
 			if(val<50 || val>400) val=50;	// default is 50Hz
 			packet[11]= val;
 			packet[12]= val >> 8;
-			if(sub_protocol == PPM_IBUS || sub_protocol == PPM_SBUS)
-				packet[13] = 0x01;	// PPM output enabled
-			else
-				packet[13] = 0x00;
+			packet[13] = sub_protocol & 0x01;	// 1 -> PPM output enabled
 			packet[14]= 0x00;
 			for(uint8_t i=15; i<37; i++)
 				packet[i] = 0xff;
 			packet[18] = 0x05;		// ?
 			packet[19] = 0xdc;		// ?
 			packet[20] = 0x05;		// ?
-			if(sub_protocol == PWM_SBUS || sub_protocol == PPM_SBUS)
+			if(sub_protocol&2)
 				packet[21] = 0xdd;	// SBUS output enabled
 			else
 				packet[21] = 0xde;	// IBUS
@@ -244,11 +270,18 @@ static void AFHDS2A_build_packet(uint8_t type)
 }
 
 #define AFHDS2A_WAIT_WRITE 0x80
-uint16_t ReadAFHDS2A()
+
+#ifdef STM32_BOARD
+	#define AFHDS2A_WRITE_TIME 1550
+#else
+	#define AFHDS2A_WRITE_TIME 1700
+#endif
+
+uint16_t AFHDS2A_callback()
 {
 	static uint8_t packet_type;
 	static uint16_t packet_counter;
-	uint8_t data_rx;
+	uint8_t data_rx=0;
 	uint16_t start;
 	#ifndef FORCE_AFHDS2A_TUNING
 		A7105_AdjustLOBaseFreq(1);
@@ -260,12 +293,12 @@ uint16_t ReadAFHDS2A()
 		case AFHDS2A_BIND3:
 			AFHDS2A_build_bind_packet();
 			A7105_WriteData(AFHDS2A_TXPACKET_SIZE, packet_count%2 ? 0x0d : 0x8c);
-			if(!(A7105_ReadReg(A7105_00_MODE) & (1<<5 | 1<<6)))
-			{ // FECF+CRCF Ok
+			if(!(A7105_ReadReg(A7105_00_MODE) & (1<<5)))	//  removed FECF check due to issues with fs-x6b -> & (1<<5 | 1<<6)
+			{ // CRCF Ok
 				A7105_ReadData(AFHDS2A_RXPACKET_SIZE);
 				if(packet[0] == 0xbc && packet[9] == 0x01)
 				{
-					uint8_t addr;
+					uint16_t addr;
 					if(RX_num<16)
 						addr=AFHDS2A_EEPROM_OFFSET+RX_num*4;
 					else
@@ -277,23 +310,23 @@ uint16_t ReadAFHDS2A()
 					}
 					phase = AFHDS2A_BIND4;
 					packet_count++;
-					return 3850;
+					break;
 				}
 			}
 			packet_count++;
 			if(IS_BIND_DONE)
 			{ // exit bind if asked to do so from the GUI
 				phase = AFHDS2A_BIND4;
-				return 3850;
+				break;
 			}
 			phase |= AFHDS2A_WAIT_WRITE;
-			return 1700;
+			return AFHDS2A_WRITE_TIME;
 		case AFHDS2A_BIND1|AFHDS2A_WAIT_WRITE:
 		case AFHDS2A_BIND2|AFHDS2A_WAIT_WRITE:
 		case AFHDS2A_BIND3|AFHDS2A_WAIT_WRITE:
 			//Wait for TX completion
 			start=micros();
-			while ((uint16_t)micros()-start < 700)			// Wait max 700µs, using serial+telemetry exit in about 120µs
+			while ((uint16_t)((uint16_t)micros()-start) < 700)			// Wait max 700µs, using serial+telemetry exit in about 120µs
 				if(!(A7105_ReadReg(A7105_00_MODE) & 0x01))
 					break;
 			A7105_SetPower();
@@ -303,7 +336,7 @@ uint16_t ReadAFHDS2A()
 			phase++;
 			if(phase > AFHDS2A_BIND3)
 				phase = AFHDS2A_BIND1;
-			return 2150;
+			return 3850-AFHDS2A_WRITE_TIME;
 		case AFHDS2A_BIND4:
 			AFHDS2A_build_bind_packet();
 			A7105_WriteData(AFHDS2A_TXPACKET_SIZE, packet_count%2 ? 0x0d : 0x8c);
@@ -315,7 +348,7 @@ uint16_t ReadAFHDS2A()
 				phase = AFHDS2A_DATA_INIT;
 				BIND_DONE;
 			}
-			return 3850;
+			break;
 		case AFHDS2A_DATA_INIT:
 			packet_counter=0;
 			packet_type = AFHDS2A_PACKET_STICKS;
@@ -325,10 +358,7 @@ uint16_t ReadAFHDS2A()
 				telemetry_set_input_sync(3850);
 			#endif
 			AFHDS2A_build_packet(packet_type);
-			if((A7105_ReadReg(A7105_00_MODE) & 0x01))		// Check if something has been received...
-				data_rx=0;
-			else
-				data_rx=1;									// Yes
+			data_rx=A7105_ReadReg(A7105_00_MODE);			// Check if something has been received...
 			A7105_WriteData(AFHDS2A_TXPACKET_SIZE, hopping_frequency[hopping_frequency_no++]);
 			if(hopping_frequency_no >= AFHDS2A_NUMFREQ)
 				hopping_frequency_no = 0;
@@ -344,32 +374,27 @@ uint16_t ReadAFHDS2A()
 					}
 					else
 				#endif
-						packet_type = AFHDS2A_PACKET_STICKS;		// todo : check for settings changes
+						packet_type = AFHDS2A_PACKET_STICKS;	// todo : check for settings changes
 			}
-			if(!(A7105_ReadReg(A7105_00_MODE) & (1<<5 | 1<<6)) && data_rx==1)
-			{ // RX+FECF+CRCF Ok
+			if(!(A7105_ReadReg(A7105_00_MODE) & (1<<5)) && !(data_rx & 1))	// removed FECF check due to issues with fs-x6b ->  & (1<<5 | 1<<6)
+			{ // RX+CRCF Ok
 				A7105_ReadData(AFHDS2A_RXPACKET_SIZE);
 				if(packet[0] == 0xAA && packet[9] == 0xFC)
-					packet_type=AFHDS2A_PACKET_SETTINGS;	// RX is asking for settings
+					packet_type=AFHDS2A_PACKET_SETTINGS;		// RX is asking for settings
 				else
-					if(packet[0] == 0xAA || packet[0] == 0xAC)
-					{
+					if((packet[0] == 0xAA && packet[9]!=0xFD) || packet[0] == 0xAC)
+					{// Normal telemetry packet, ignore packets which contain the RX configuration: AA FD FF 32 00 01 00 FF FF FF 05 DC 05 DE FA FF FF FF FF FF FF FF FF FF FF FF FF FF FF
 						if(!memcmp(&packet[1], rx_tx_addr, 4))
 						{ // TX address validated
-							#ifdef AFHDS2A_LQI_CH
-								if(packet[0]==0xAA && packet[9]!=0xFD)
-								{// Normal telemetry packet
-									for(uint8_t sensor=0; sensor<7; sensor++)
-									{//read LQI value for RX output
-										uint8_t index = 9+(4*sensor);
-										if(packet[index]==AFHDS2A_SENSOR_RX_ERR_RATE && packet[index+2]<=100)
-										{
-											RX_LQI=packet[index+2];
-											break;
-										}
-									}
+							for(uint8_t sensor=0; sensor<7; sensor++)
+							{//read LQI value for RX output
+								uint8_t index = 9+(4*sensor);
+								if(packet[index]==AFHDS2A_SENSOR_RX_ERR_RATE && packet[index+2]<=100)
+								{
+									RX_LQI=packet[index+2];
+									break;
 								}
-							#endif
+							}
 							#if defined(AFHDS2A_FW_TELEMETRY) || defined(AFHDS2A_HUB_TELEMETRY)
 								AFHDS2A_update_telemetry();
 							#endif
@@ -378,23 +403,23 @@ uint16_t ReadAFHDS2A()
 			}
 			packet_counter++;
 			phase |= AFHDS2A_WAIT_WRITE;
-			return 1700;
+			return AFHDS2A_WRITE_TIME;
 		case AFHDS2A_DATA|AFHDS2A_WAIT_WRITE:
 			//Wait for TX completion
 			start=micros();
-			while ((uint16_t)micros()-start < 700)			// Wait max 700µs, using serial+telemetry exit in about 120µs
+			while ((uint16_t)((uint16_t)micros()-start) < 700)			// Wait max 700µs, using serial+telemetry exit in about 120µs
 				if(!(A7105_ReadReg(A7105_00_MODE) & 0x01))
 					break;
 			A7105_SetPower();
 			A7105_SetTxRxMode(RX_EN);
 			A7105_Strobe(A7105_RX);
 			phase &= ~AFHDS2A_WAIT_WRITE;
-			return 2150;
+			return 3850-AFHDS2A_WRITE_TIME;
 	}
-	return 3850; // never reached, please the compiler
+	return 3850;
 }
 
-uint16_t initAFHDS2A()
+void AFHDS2A_init()
 {
 	A7105_Init();
 
@@ -407,7 +432,7 @@ uint16_t initAFHDS2A()
 	{
 		phase = AFHDS2A_DATA_INIT;
 		//Read RX ID from EEPROM based on RX_num, RX_num must be uniq for each RX
-		uint8_t addr;
+		uint16_t addr;
 		if(RX_num<16)
 			addr=AFHDS2A_EEPROM_OFFSET+RX_num*4;
 		else
@@ -416,6 +441,9 @@ uint16_t initAFHDS2A()
 			rx_id[i]=eeprom_read_byte((EE_ADDR)(addr+i));
 	}
 	hopping_frequency_no = 0;
-	return 50000;
+	if(sub_protocol&0x04)
+		num_ch=17;
+	else
+		num_ch=14;
 }
 #endif

Multiprotocol/ASSAN_nrf24l01.ino

@@ -33,19 +33,14 @@ enum {
     ASSAN_DATA5
 };
 
-void ASSAN_init()
+void ASSAN_RF_init()
 {
     NRF24L01_Initialize();
+	//Specifics to ASSAN
     NRF24L01_WriteReg(NRF24L01_03_SETUP_AW, 0x02);			// 4 bytes rx/tx address
-	NRF24L01_WriteRegisterMulti(NRF24L01_10_TX_ADDR, (uint8_t *)"\x80\x80\x80\xB8", ASSAN_ADDRESS_LENGTH);		// Bind address
+	NRF24L01_WriteRegisterMulti(NRF24L01_10_TX_ADDR,    (uint8_t *)"\x80\x80\x80\xB8", ASSAN_ADDRESS_LENGTH);	// Bind address
 	NRF24L01_WriteRegisterMulti(NRF24L01_0A_RX_ADDR_P0, (uint8_t *)"\x80\x80\x80\xB8", ASSAN_ADDRESS_LENGTH);	// Bind address
-	NRF24L01_FlushTx();
-	NRF24L01_FlushRx();
-    NRF24L01_WriteReg(NRF24L01_07_STATUS, 0x70);			// Clear data ready, data sent, and retransmit
-    NRF24L01_WriteReg(NRF24L01_01_EN_AA, 0x00);				// No Auto Acknowldgement on all data pipes
-	NRF24L01_WriteReg(NRF24L01_02_EN_RXADDR, 0x01);			// Enable data pipe 0 only
 	NRF24L01_WriteReg(NRF24L01_11_RX_PW_P0, ASSAN_PACKET_SIZE);
-    NRF24L01_SetPower();
 }
 
 void ASSAN_send_packet()
@@ -169,17 +164,16 @@ static void __attribute__((unused)) ASSAN_initialize_txid()
 	hopping_frequency[1]=freq2;
 }
 
-uint16_t initASSAN()
+void ASSAN_init()
 {
 	ASSAN_initialize_txid();
-	ASSAN_init();
+	ASSAN_RF_init();
 	hopping_frequency_no = 0;
 
 	if(IS_BIND_IN_PROGRESS)
 		phase=ASSAN_BIND0;
 	else 
 		phase=ASSAN_DATA0;
-	return 1000;
 }
 
 #endif

Multiprotocol/Arduino.ino

@@ -115,7 +115,7 @@ void delayMilliseconds(unsigned long ms)
    uint16_t lms = ms ;
 
    while (lms > 0) {
-      if (((uint16_t)micros() - start) >= 1000) {
+      if ((uint16_t)((uint16_t)micros() - start) >= 1000) {
          lms--;
          start += 1000;
       }

Multiprotocol/BUGSMINI_nrf24l01.ino

@@ -16,7 +16,7 @@
 
 #if defined(BUGSMINI_NRF24L01_INO)
 
-#include "iface_nrf24l01.h"
+#include "iface_xn297.h"
 
 #define BUGSMINI_INITIAL_WAIT    500
 #define BUGSMINI_PACKET_INTERVAL 6840
@@ -57,22 +57,10 @@ enum {
 #define BUGSMINI_FLAG_ANGLE   0x02    // angle/acro mode (set is angle mode)
 #define BUGSMINI_FLAG_ALTHOLD 0x04    // angle/altitude hold mode (set is altitude mode)
 
-static void __attribute__((unused)) BUGSMINI_init()
+static void __attribute__((unused)) BUGSMINI_RF_init()
 {
-	NRF24L01_Initialize();
-	NRF24L01_SetTxRxMode(TX_EN);
-	NRF24L01_FlushTx();
-	NRF24L01_FlushRx();
-	NRF24L01_WriteReg(NRF24L01_07_STATUS, 0x70);     // Clear data ready, data sent, and retransmit
-	NRF24L01_WriteReg(NRF24L01_01_EN_AA, 0x00);      // No Auto Acknowldgement on all data pipes
-	NRF24L01_WriteReg(NRF24L01_02_EN_RXADDR, 0x01);  // Enable data pipe 0 only
-	NRF24L01_WriteReg(NRF24L01_11_RX_PW_P0, BUGSMINI_RX_PAYLOAD_SIZE); // bytes of data payload for rx pipe 1
-	NRF24L01_WriteReg(NRF24L01_06_RF_SETUP, 0x07);
-	NRF24L01_SetBitrate(NRF24L01_BR_1M);
-	NRF24L01_SetPower();
-	NRF24L01_Activate(0x73);                          // Activate feature register
-	NRF24L01_WriteReg(NRF24L01_1C_DYNPD, 0x00);       // Disable dynamic payload length on all pipes
-	NRF24L01_WriteReg(NRF24L01_1D_FEATURE, 0x00);     // Set feature bits on
+	XN297_Configure(XN297_CRCEN, XN297_SCRAMBLED, XN297_1M);
+	//XN297_HoppingCalib(BUGSMINI_NUM_RF_CHANNELS*2);
 }
 
 static void __attribute__((unused)) BUGSMINI_check_arming()
@@ -95,7 +83,7 @@ static void __attribute__((unused)) BUGSMINI_check_arming()
 	}
 }
 
-static void __attribute__((unused)) BUGSMINI_send_packet(uint8_t bind)
+static void __attribute__((unused)) BUGSMINI_send_packet()
 {
 	BUGSMINI_check_arming();  // sets globals arm_flags and armed
 
@@ -107,7 +95,7 @@ static void __attribute__((unused)) BUGSMINI_send_packet(uint8_t bind)
 	packet[1] = BUGSMINI_txid[0];
 	packet[2] = BUGSMINI_txid[1];
 	packet[3] = BUGSMINI_txid[2];
-	if(bind)
+	if(IS_BIND_IN_PROGRESS)
 	{
 		packet[4] = 0x00;
 		packet[5] = 0x7d;
@@ -159,15 +147,14 @@ static void __attribute__((unused)) BUGSMINI_send_packet(uint8_t bind)
 		hopping_frequency_no++;
 		if(hopping_frequency_no >= BUGSMINI_NUM_RF_CHANNELS)
 			hopping_frequency_no = 0;
-		NRF24L01_WriteReg(NRF24L01_05_RF_CH, bind ? hopping_frequency[hopping_frequency_no+BUGSMINI_NUM_RF_CHANNELS] : hopping_frequency[hopping_frequency_no]);
+		XN297_Hopping(IS_BIND_IN_PROGRESS ? hopping_frequency[hopping_frequency_no+BUGSMINI_NUM_RF_CHANNELS] : hopping_frequency[hopping_frequency_no]);
 	}
 
-	// Power on, TX mode, 2byte CRC
-	XN297_Configure(_BV(NRF24L01_00_EN_CRC) | _BV(NRF24L01_00_CRCO) | _BV(NRF24L01_00_PWR_UP));
-	NRF24L01_WriteReg(NRF24L01_07_STATUS, 0x70);
-	NRF24L01_FlushTx();
+	// Send
+	XN297_SetPower();
+	XN297_SetTxRxMode(TXRX_OFF);
+	XN297_SetTxRxMode(TX_EN);
 	XN297_WritePayload(packet, BUGSMINI_TX_PAYLOAD_SIZE);
-	NRF24L01_SetPower();
 }
 
 // compute final address for the rxid received during bind
@@ -231,37 +218,37 @@ static void __attribute__((unused)) BUGSMINI_make_address()
     // Something wrong happened if we arrive here....
 }
 
+#if defined(BUGS_HUB_TELEMETRY)
 static void __attribute__((unused)) BUGSMINI_update_telemetry()
 {
-#if defined(BUGS_HUB_TELEMETRY)
 	uint8_t checksum = 0x6d;
 	for(uint8_t i=1; i<12; i++)
-		checksum += packet[i];
-	if(packet[0] == checksum)
+		checksum += packet_in[i];
+	if(packet_in[0] == checksum)
 	{
-		RX_RSSI = packet[3];
+		RX_RSSI = packet_in[3];
 		if(sub_protocol==BUGS3H)
 		{
-			if(packet[11] & 0x40)
+			if(packet_in[11] & 0x40)
 				v_lipo1 = 0x40; // Warning
-			else if(packet[11] & 0x80)
+			else if(packet_in[11] & 0x80)
 				v_lipo1 = 0x20; // Critical
 			else
 				v_lipo1 = 0x80; // Ok
 		}
 		else
 		{
-			if(packet[11] & 0x80)
+			if(packet_in[11] & 0x80)
 				v_lipo1 = 0x80; // Ok
-			else if(packet[11] & 0x40)
+			else if(packet_in[11] & 0x40)
 				v_lipo1 = 0x40; // Warning
 			else
 				v_lipo1 = 0x20; // Critical
 		}
 		telemetry_link=1;
 	}
-#endif
 }
+#endif
 
 uint16_t BUGSMINI_callback()
 {
@@ -269,58 +256,52 @@ uint16_t BUGSMINI_callback()
 	switch(phase)
 	{
 		case BUGSMINI_BIND1:
-			if( NRF24L01_ReadReg(NRF24L01_07_STATUS) & _BV(NRF24L01_07_RX_DR))
+			if( XN297_IsRX() )
 			{ // RX fifo data ready
-				XN297_ReadPayload(packet, BUGSMINI_RX_PAYLOAD_SIZE);
+				XN297_ReadPayload(packet, BUGSMINI_RX_PAYLOAD_SIZE);	// Not checking the CRC??
 				base_adr=BUGSMINI_EEPROM_OFFSET+(RX_num&0x0F)*2;
-				eeprom_write_byte((EE_ADDR)(base_adr+0),packet[1]);	// Save rxid in EEPROM
-				eeprom_write_byte((EE_ADDR)(base_adr+1),packet[2]);	// Save rxid in EEPROM
-				NRF24L01_SetTxRxMode(TXRX_OFF);
-				NRF24L01_SetTxRxMode(TX_EN);
+				eeprom_write_byte((EE_ADDR)(base_adr+0),packet[1]);		// Save rxid in EEPROM
+				eeprom_write_byte((EE_ADDR)(base_adr+1),packet[2]);		// Save rxid in EEPROM
 				BUGSMINI_make_address();
 				XN297_SetTXAddr(rx_tx_addr, 5);
-				XN297_SetRXAddr(rx_tx_addr, 5);
+				XN297_SetRXAddr(rx_tx_addr, BUGSMINI_RX_PAYLOAD_SIZE);
 				phase = BUGSMINI_DATA1;
 				BIND_DONE;
-				return BUGSMINI_PACKET_INTERVAL;
+				break;
 			}
-			NRF24L01_SetTxRxMode(TXRX_OFF);
-			NRF24L01_SetTxRxMode(TX_EN);
-			BUGSMINI_send_packet(1);
+			BUGSMINI_send_packet();
 			phase = BUGSMINI_BIND2;
 			return BUGSMINI_WRITE_WAIT;
 		case BUGSMINI_BIND2:
 			// switch to RX mode
-			NRF24L01_SetTxRxMode(TXRX_OFF);
-			NRF24L01_SetTxRxMode(RX_EN);
-			NRF24L01_FlushRx();
-			XN297_Configure(_BV(NRF24L01_00_EN_CRC) | _BV(NRF24L01_00_CRCO) 
-						  | _BV(NRF24L01_00_PWR_UP) | _BV(NRF24L01_00_PRIM_RX));
+			XN297_SetTxRxMode(TXRX_OFF);
+			XN297_SetTxRxMode(RX_EN);
 			phase = BUGSMINI_BIND1;
 			return BUGSMINI_PACKET_INTERVAL - BUGSMINI_WRITE_WAIT;
 		case BUGSMINI_DATA1:
 			#ifdef MULTI_SYNC
 				telemetry_set_input_sync(BUGSMINI_PACKET_INTERVAL);
 			#endif
-			if( NRF24L01_ReadReg(NRF24L01_07_STATUS) & _BV(NRF24L01_07_RX_DR))
-			{ // RX fifo data ready => read only 12 bytes to not overwrite channel change flag
-				XN297_ReadPayload(packet, 12);
-				BUGSMINI_update_telemetry();
-			}
-			NRF24L01_SetTxRxMode(TXRX_OFF);
-			NRF24L01_SetTxRxMode(TX_EN);
-			BUGSMINI_send_packet(0);
+			#if defined(BUGS_HUB_TELEMETRY)
+				if( XN297_IsRX() )
+				{
+					XN297_ReadPayload(packet_in, BUGSMINI_RX_PAYLOAD_SIZE);	// Not checking the CRC??
+					BUGSMINI_update_telemetry();
+				}
+			#endif
+			BUGSMINI_send_packet();
+	#if not defined(BUGS_HUB_TELEMETRY)
+			break;
+	#else
 			phase = BUGSMINI_DATA2;
 			return BUGSMINI_WRITE_WAIT;
 		case BUGSMINI_DATA2:
 			// switch to RX mode
-			NRF24L01_SetTxRxMode(TXRX_OFF);
-			NRF24L01_FlushRx();
-			NRF24L01_SetTxRxMode(RX_EN);
-			XN297_Configure(_BV(NRF24L01_00_EN_CRC) | _BV(NRF24L01_00_CRCO) 
-							| _BV(NRF24L01_00_PWR_UP) | _BV(NRF24L01_00_PRIM_RX));
+			XN297_SetTxRxMode(TXRX_OFF);
+			XN297_SetTxRxMode(RX_EN);
 			phase = BUGSMINI_DATA1;
 			return BUGSMINI_PACKET_INTERVAL - BUGSMINI_WRITE_WAIT;
+	#endif
 	}
 	return BUGSMINI_PACKET_INTERVAL;
 }
@@ -357,28 +338,27 @@ static void __attribute__((unused)) BUGSMINI_initialize_txid()
 	BUGSMINI_txhash = pgm_read_byte_near( &BUGSMINI_tx_hash[rx_tx_addr[3]%BUGSMINI_NUM_TX_RF_MAPS] );
 }
 
-uint16_t initBUGSMINI()
+void BUGSMINI_init()
 {
 	BUGSMINI_initialize_txid();
+	BUGSMINI_RF_init();
 	memset(packet, (uint8_t)0, BUGSMINI_TX_PAYLOAD_SIZE);
-	BUGSMINI_init();
 	if(IS_BIND_IN_PROGRESS)
 	{
 		XN297_SetTXAddr((const uint8_t*)"mjxRC", 5);
-		XN297_SetRXAddr((const uint8_t*)"mjxRC", 5);
+		XN297_SetRXAddr((const uint8_t*)"mjxRC", BUGSMINI_RX_PAYLOAD_SIZE);
 		phase = BUGSMINI_BIND1;
 	}
 	else
 	{
 		BUGSMINI_make_address();
 		XN297_SetTXAddr(rx_tx_addr, 5);
-		XN297_SetRXAddr(rx_tx_addr, 5);
+		XN297_SetRXAddr(rx_tx_addr, BUGSMINI_RX_PAYLOAD_SIZE);
 		phase = BUGSMINI_DATA1;
 	}
 	armed = 0;
 	arm_flags = BUGSMINI_FLAG_DISARM;    // initial value from captures
 	arm_channel_previous = BUGSMINI_CH_SW_ARM;
-	return BUGSMINI_INITIAL_WAIT;
 }
 
 #endif

Multiprotocol/Bayang_Rx_nrf24l01.ino

@@ -15,7 +15,7 @@ Multiprotocol is distributed in the hope that it will be useful,
 
 #if defined(BAYANG_RX_NRF24L01_INO)
 
-#include "iface_nrf24l01.h"
+#include "iface_xn297.h"
 
 #define BAYANG_RX_PACKET_SIZE		15
 #define BAYANG_RX_RF_NUM_CHANNELS	4
@@ -27,28 +27,15 @@ enum {
 	BAYANG_RX_DATA
 };
 
-static void __attribute__((unused)) Bayang_Rx_init_nrf24l01()
+static void __attribute__((unused)) Bayang_Rx_RF_init()
 {
 	const uint8_t bind_address[BAYANG_RX_ADDRESS_LENGTH] = { 0,0,0,0,0 };
-	NRF24L01_Initialize();
+	XN297_Configure(XN297_CRCEN, XN297_SCRAMBLED, XN297_1M);
 	XN297_SetTXAddr(bind_address, BAYANG_RX_ADDRESS_LENGTH);
-	XN297_SetRXAddr(bind_address, BAYANG_RX_ADDRESS_LENGTH);
-	NRF24L01_FlushRx();
-	NRF24L01_WriteReg(NRF24L01_07_STATUS, 0x70);     	// Clear data ready, data sent, and retransmit
-	NRF24L01_WriteReg(NRF24L01_01_EN_AA, 0x00);      	// No Auto Acknowldgement on all data pipes
-	NRF24L01_WriteReg(NRF24L01_02_EN_RXADDR, 0x01);  	// Enable data pipe 0 only
-	NRF24L01_WriteReg(NRF24L01_11_RX_PW_P0, BAYANG_RX_PACKET_SIZE + 2); // 2 extra bytes for xn297 crc
-	NRF24L01_WriteReg(NRF24L01_05_RF_CH, BAYANG_RX_RF_BIND_CHANNEL);
-	NRF24L01_SetBitrate(NRF24L01_BR_1M);             	// 1Mbps
-	NRF24L01_SetPower();
-	NRF24L01_Activate(0x73);							// Activate feature register
-	NRF24L01_WriteReg(NRF24L01_1C_DYNPD, 0x00);			// Disable dynamic payload length on all pipes
-	NRF24L01_WriteReg(NRF24L01_1D_FEATURE, 0x01);
-	NRF24L01_Activate(0x73);
-	NRF24L01_SetTxRxMode(TXRX_OFF);
-	NRF24L01_FlushRx();
-	NRF24L01_SetTxRxMode(RX_EN);
-	XN297_Configure(_BV(NRF24L01_00_EN_CRC) | _BV(NRF24L01_00_CRCO) | _BV(NRF24L01_00_PWR_UP) | _BV(NRF24L01_00_PRIM_RX));
+	XN297_SetRXAddr(bind_address, BAYANG_RX_PACKET_SIZE);
+	XN297_RFChannel(BAYANG_RX_RF_BIND_CHANNEL);
+	XN297_SetTxRxMode(TXRX_OFF);
+	XN297_SetTxRxMode(RX_EN);
 }
 
 static uint8_t __attribute__((unused)) Bayang_Rx_check_validity() {
@@ -98,10 +85,10 @@ static void __attribute__((unused)) Bayang_Rx_build_telemetry_packet()
 	}
 }
 
-uint16_t initBayang_Rx()
+void BAYANG_RX_init()
 {
 	uint8_t i;
-	Bayang_Rx_init_nrf24l01();
+	Bayang_Rx_RF_init();
 	hopping_frequency_no = 0;
 	rx_data_started = false;
 	rx_data_received = false;
@@ -115,91 +102,101 @@ uint16_t initBayang_Rx()
 			rx_tx_addr[i] = eeprom_read_byte((EE_ADDR)temp++);
 		for (i = 0; i < BAYANG_RX_RF_NUM_CHANNELS; i++)
 			hopping_frequency[i] = eeprom_read_byte((EE_ADDR)temp++);
+		//XN297_HoppingCalib(BAYANG_RX_RF_NUM_CHANNELS);
 		XN297_SetTXAddr(rx_tx_addr, BAYANG_RX_ADDRESS_LENGTH);
-		XN297_SetRXAddr(rx_tx_addr, BAYANG_RX_ADDRESS_LENGTH);
+		XN297_SetRXAddr(rx_tx_addr, BAYANG_RX_PACKET_SIZE);
 		phase = BAYANG_RX_DATA;
 	}
-	return 1000;
 }
 
-uint16_t Bayang_Rx_callback()
+uint16_t BAYANG_RX_callback()
 {
 	uint8_t i;
 	static int8_t read_retry;
-	static uint16_t pps_counter;
-	static uint32_t pps_timer = 0;
 
-	switch (phase) {
-	case BAYANG_RX_BIND:
-		if (NRF24L01_ReadReg(NRF24L01_07_STATUS) & _BV(NRF24L01_07_RX_DR)) {
-			// data received from TX
-			if (XN297_ReadPayload(packet, BAYANG_RX_PACKET_SIZE) && ( packet[0] == 0xA4 || packet[0] == 0xA2 ) && Bayang_Rx_check_validity()) {
-				// store tx info into eeprom
-				uint16_t temp = BAYANG_RX_EEPROM_OFFSET;
-				for (i = 0; i < 5; i++) {
-					rx_tx_addr[i] = packet[i + 1];
-					eeprom_write_byte((EE_ADDR)temp++, rx_tx_addr[i]);
-				}
-				for (i = 0; i < 4; i++) {
-					hopping_frequency[i] = packet[i + 6];
-					eeprom_write_byte((EE_ADDR)temp++, hopping_frequency[i]);
-				}
-				XN297_SetTXAddr(rx_tx_addr, BAYANG_RX_ADDRESS_LENGTH);
-				XN297_SetRXAddr(rx_tx_addr, BAYANG_RX_ADDRESS_LENGTH);
-				BIND_DONE;
-				phase = BAYANG_RX_DATA;
-			}
-			NRF24L01_FlushRx();
-			NRF24L01_WriteReg(NRF24L01_07_STATUS, 0x70);
-		}
-		break;
-	case BAYANG_RX_DATA:
-		if (NRF24L01_ReadReg(NRF24L01_07_STATUS) & _BV(NRF24L01_07_RX_DR)) {
-			if (XN297_ReadPayload(packet, BAYANG_RX_PACKET_SIZE) && packet[0] == 0xA5 && Bayang_Rx_check_validity()) {
-				if (telemetry_link == 0) {
-					Bayang_Rx_build_telemetry_packet();
-					telemetry_link = 1;
-				}
-				rx_data_started = true;
-				rx_data_received = true;
-				read_retry = 8;
-				pps_counter++;
-			}
-		}
-		// packets per second
-		if (millis() - pps_timer >= 1000) {
-			pps_timer = millis();
-			debugln("%d pps", pps_counter);
-			RX_LQI = pps_counter >> 1;
-			pps_counter = 0;
-		}
-		// frequency hopping
-		if (read_retry++ >= 8) {
-			hopping_frequency_no++;
-			if (hopping_frequency_no >= BAYANG_RX_RF_NUM_CHANNELS)
-				hopping_frequency_no = 0;
-			NRF24L01_WriteReg(NRF24L01_05_RF_CH, hopping_frequency[hopping_frequency_no]);
-			NRF24L01_FlushRx();
-			NRF24L01_WriteReg(NRF24L01_07_STATUS, 0x70);
-			if (rx_data_started)
+	switch (phase)
+	{
+		case BAYANG_RX_BIND:
+			if(IS_BIND_DONE)
 			{
-				if(rx_data_received)
-				{ // In sync
-					rx_data_received = false;
-					read_retry = 5;
-					return 1500;
+				BAYANG_RX_init();	// Abort bind
+				break;
+			}
+			if ( XN297_IsRX() )
+			{
+				debugln("RX");
+				// data received from TX
+				if (XN297_ReadPayload(packet, BAYANG_RX_PACKET_SIZE) && ( packet[0] == 0xA4 || packet[0] == 0xA2 ) && Bayang_Rx_check_validity())
+				{
+					// store tx info into eeprom
+					uint16_t temp = BAYANG_RX_EEPROM_OFFSET;
+					for (i = 0; i < 5; i++) {
+						rx_tx_addr[i] = packet[i + 1];
+						eeprom_write_byte((EE_ADDR)temp++, rx_tx_addr[i]);
+					}
+					for (i = 0; i < 4; i++) {
+						hopping_frequency[i] = packet[i + 6];
+						eeprom_write_byte((EE_ADDR)temp++, hopping_frequency[i]);
+					}
+					//XN297_HoppingCalib(BAYANG_RX_RF_NUM_CHANNELS);
+					XN297_SetTXAddr(rx_tx_addr, BAYANG_RX_ADDRESS_LENGTH);
+					XN297_SetRXAddr(rx_tx_addr, BAYANG_RX_PACKET_SIZE);
+					BIND_DONE;
+					phase = BAYANG_RX_DATA;
+				}
+				XN297_SetTxRxMode(RX_EN);
+			}
+			break;
+		case BAYANG_RX_DATA:
+			if ( XN297_IsRX() ) {
+				if (XN297_ReadPayload(packet, BAYANG_RX_PACKET_SIZE) && packet[0] == 0xA5 && Bayang_Rx_check_validity()) {
+					if ((telemetry_link & 0x7F) == 0) {
+						Bayang_Rx_build_telemetry_packet();
+						telemetry_link = 1;
+						#ifdef SEND_CPPM
+							if(sub_protocol>0)
+								telemetry_link |= 0x80;	// Disable telemetry output
+						#endif
+					}
+					rx_data_started = true;
+					rx_data_received = true;
+					read_retry = 8;
+					pps_counter++;
+				}
+			}
+			// packets per second
+			if (millis() - pps_timer >= 1000) {
+				pps_timer = millis();
+				debugln("%d pps", pps_counter);
+				RX_LQI = pps_counter >> 1;
+				pps_counter = 0;
+			}
+			// frequency hopping
+			if (read_retry++ >= 8) {
+				hopping_frequency_no++;
+				if (hopping_frequency_no >= BAYANG_RX_RF_NUM_CHANNELS)
+					hopping_frequency_no = 0;
+				XN297_Hopping(hopping_frequency_no);
+				XN297_SetTxRxMode(RX_EN);
+				if (rx_data_started)
+				{
+					if(rx_data_received)
+					{ // In sync
+						rx_data_received = false;
+						read_retry = 5;
+						return 1500;
+					}
+					else
+					{ // packet lost
+						read_retry = 0;
+						if(RX_LQI==0)	// communication lost
+							rx_data_started=false;
+					}
 				}
 				else
-				{ // packet lost
-					read_retry = 0;
-					if(RX_LQI==0)	// communication lost
-						rx_data_started=false;
-				}
+					read_retry = -16; // retry longer until first packet is caught
 			}
-			else
-				read_retry = -16; // retry longer until first packet is caught
-		}
-		return 250;
+			return 250;
 	}
 	return 1000;
 }

Multiprotocol/Bayang_nrf24l01.ino

@@ -17,7 +17,7 @@ Multiprotocol is distributed in the hope that it will be useful,
 
 #if defined(BAYANG_NRF24L01_INO)
 
-#include "iface_nrf24l01.h"
+#include "iface_xn297.h"
 
 #define BAYANG_BIND_COUNT		1000
 #define BAYANG_PACKET_PERIOD	2000
@@ -97,6 +97,8 @@ static void __attribute__((unused)) BAYANG_send_packet()
 	}
 	else
 	{
+		XN297_Hopping(hopping_frequency_no++);
+		hopping_frequency_no%=BAYANG_RF_NUM_CHANNELS;
 		uint16_t val;
 		uint8_t dyntrim = 1;
 		switch (sub_protocol)
@@ -143,19 +145,19 @@ static void __attribute__((unused)) BAYANG_send_packet()
 		if(CH13_SW)
 			packet[3] |= BAYANG_FLAG_EMG_STOP;
 		//Aileron
-		val = convert_channel_10b(AILERON);
+		val = convert_channel_10b(AILERON, false);
 		packet[4] = (val>>8) + (dyntrim ? ((val>>2) & 0xFC) : 0x7C);
 		packet[5] = val & 0xFF;
 		//Elevator
-		val = convert_channel_10b(ELEVATOR);
+		val = convert_channel_10b(ELEVATOR, false);
 		packet[6] = (val>>8) + (dyntrim ? ((val>>2) & 0xFC) : 0x7C);
 		packet[7] = val & 0xFF;
 		//Throttle
-		val = convert_channel_10b(THROTTLE);
+		val = convert_channel_10b(THROTTLE, false);
 		packet[8] = (val>>8) + 0x7C;
 		packet[9] = val & 0xFF;
 		//Rudder
-		val = convert_channel_10b(RUDDER);
+		val = convert_channel_10b(RUDDER, false);
 		packet[10] = (val>>8) + (dyntrim ? ((val>>2) & 0xFC) : 0x7C);
 		packet[11] = val & 0xFF;
 	}
@@ -192,84 +194,61 @@ static void __attribute__((unused)) BAYANG_send_packet()
 	for (uint8_t i=0; i < BAYANG_PACKET_SIZE-1; i++)
 		packet[14] += packet[i];
 
-	NRF24L01_WriteReg(NRF24L01_05_RF_CH, IS_BIND_IN_PROGRESS ? rf_ch_num:hopping_frequency[hopping_frequency_no++]);
-	hopping_frequency_no%=BAYANG_RF_NUM_CHANNELS;
-
-	// Power on, TX mode, 2byte CRC
-	// Why CRC0? xn297 does not interpret it - either 16-bit CRC or nothing
-	NRF24L01_FlushTx();
-	NRF24L01_SetTxRxMode(TX_EN);
-	XN297_Configure(_BV(NRF24L01_00_EN_CRC) | _BV(NRF24L01_00_CRCO) | _BV(NRF24L01_00_PWR_UP));
+	// Send
+	XN297_SetPower();
+	XN297_SetTxRxMode(TX_EN);
 	XN297_WritePayload(packet, BAYANG_PACKET_SIZE);
-
-	NRF24L01_SetPower();	// Set tx_power
 }
 
 #ifdef BAYANG_HUB_TELEMETRY
 static void __attribute__((unused)) BAYANG_check_rx(void)
 {
-	if (NRF24L01_ReadReg(NRF24L01_07_STATUS) & _BV(NRF24L01_07_RX_DR))
+	if( XN297_IsRX() )
 	{ // data received from model
-		XN297_ReadPayload(packet, BAYANG_PACKET_SIZE);
-		NRF24L01_WriteReg(NRF24L01_07_STATUS, 255);
-
-		NRF24L01_FlushRx();
+		XN297_ReadPayload(packet, BAYANG_PACKET_SIZE);	// Strange can't test the CRC since it seems to be disabled on telemetry packets...
 		uint8_t check = packet[0];
 		for (uint8_t i=1; i < BAYANG_PACKET_SIZE-1; i++)
 			check += packet[i];
 		// decode data , check sum is ok as well, since there is no crc
-		if (packet[0] == 0x85 && packet[14] == check)
+		if (packet[0] == 0x85 && packet[14] == check && telemetry_link == 0)
 		{
 			// uncompensated battery volts*100/2
-			v_lipo1 = (packet[3]<<7) + (packet[4]>>2);
+			v_lipo1 = (packet[3]<<7) + (packet[4]>>1);
 			// compensated battery volts*100/2
-			v_lipo2 = (packet[5]<<7) + (packet[6]>>2);
+			v_lipo2 = (packet[5]<<7) + (packet[6]>>1);
 			// reception in packets / sec
 			RX_LQI = packet[7];
 			RX_RSSI = RX_LQI;
 			//Flags
 			//uint8_t flags = packet[3] >> 3;
 			// battery low: flags & 1
+			telemetry_link=1;
+			#if defined HUB_TELEMETRY
+				// Multiplexed P, I, D values in packet[8] and packet[9].
+				// The two most significant bits specify which term is sent.
+				// Remaining 14 bits represent the value: 0 .. 16383
+				frsky_send_user_frame(0x24+(packet[8]>>6), packet[9], packet[8] & 0x3F );	//0x24 = ACCEL_X_ID, so ACCEL_X_ID=P, ACCEL_Y_ID=I, ACCEL_Z_ID=D
+			#endif
 			telemetry_counter++;
-			if(telemetry_lost==0)
-				telemetry_link=1;
+			if(telemetry_lost)
+				telemetry_link=0;	// Don't send anything yet
 		}
 	}
-	NRF24L01_SetTxRxMode(TXRX_OFF);
+	XN297_SetTxRxMode(TXRX_OFF);
 }
 #endif
 
-static void __attribute__((unused)) BAYANG_init()
+static void __attribute__((unused)) BAYANG_RF_init()
 {
-	NRF24L01_Initialize();
-	NRF24L01_SetTxRxMode(TX_EN);
-
+	XN297_Configure(XN297_CRCEN, XN297_SCRAMBLED, XN297_1M);
 	XN297_SetTXAddr((uint8_t *)"\x00\x00\x00\x00\x00", BAYANG_ADDRESS_LENGTH);
-
-	NRF24L01_FlushTx();
-	NRF24L01_FlushRx();
-	NRF24L01_WriteReg(NRF24L01_07_STATUS, 0x70);     	// Clear data ready, data sent, and retransmit
-	NRF24L01_WriteReg(NRF24L01_01_EN_AA, 0x00);      	// No Auto Acknowldgement on all data pipes
-	NRF24L01_WriteReg(NRF24L01_02_EN_RXADDR, 0x01);  	// Enable data pipe 0 only
-	NRF24L01_WriteReg(NRF24L01_11_RX_PW_P0, BAYANG_PACKET_SIZE);
-	NRF24L01_SetBitrate(NRF24L01_BR_1M);             	// 1Mbps
-	NRF24L01_WriteReg(NRF24L01_04_SETUP_RETR, 0x00);	// No retransmits
-	NRF24L01_SetPower();
-	NRF24L01_Activate(0x73);							// Activate feature register
-	NRF24L01_WriteReg(NRF24L01_1C_DYNPD, 0x00);			// Disable dynamic payload length on all pipes
-	NRF24L01_WriteReg(NRF24L01_1D_FEATURE, 0x01);
-	NRF24L01_Activate(0x73);
+	//XN297_HoppingCalib(BAYANG_RF_NUM_CHANNELS);
 	
-	switch (sub_protocol)
-	{
-		case X16_AH:
-		case IRDRONE:
-			rf_ch_num = BAYANG_RF_BIND_CHANNEL_X16_AH;
-			break;
-		default:
-			rf_ch_num = BAYANG_RF_BIND_CHANNEL;
-			break;
-	}
+	//Set bind channel
+	uint8_t ch = BAYANG_RF_BIND_CHANNEL;
+	if(sub_protocol == X16_AH || sub_protocol == IRDRONE)
+		ch = BAYANG_RF_BIND_CHANNEL_X16_AH;
+	XN297_RFChannel(ch);
 }
 
 enum {
@@ -294,7 +273,7 @@ uint16_t BAYANG_callback()
 			{
 				XN297_SetTXAddr(rx_tx_addr, BAYANG_ADDRESS_LENGTH);
 				#ifdef BAYANG_HUB_TELEMETRY
-					XN297_SetRXAddr(rx_tx_addr, BAYANG_ADDRESS_LENGTH);
+					XN297_SetRXAddr(rx_tx_addr, BAYANG_PACKET_SIZE);
 				#endif
 				BIND_DONE;
 				phase++;	//WRITE
@@ -329,9 +308,9 @@ uint16_t BAYANG_callback()
 			// switch radio to rx as soon as packet is sent
 			start=(uint16_t)micros();
 			while ((uint16_t)((uint16_t)micros()-(uint16_t)start) < 1000)			// Wait max 1ms
-				if((NRF24L01_ReadReg(NRF24L01_07_STATUS) & _BV(NRF24L01_07_TX_DS)))
+				if(XN297_IsPacketSent())
 					break;
-			NRF24L01_WriteReg(NRF24L01_00_CONFIG, 0x03);
+			XN297_SetTxRxMode(RX_EN);
 			phase++;	// READ
 			return BAYANG_PACKET_TELEM_PERIOD - BAYANG_CHECK_DELAY - BAYANG_READ_DELAY;
 		case BAYANG_READ:
@@ -356,15 +335,14 @@ static void __attribute__((unused)) BAYANG_initialize_txid()
 	hopping_frequency_no=0;
 }
 
-uint16_t initBAYANG(void)
+void BAYANG_init(void)
 {
 	BIND_IN_PROGRESS;	// autobind protocol
 	phase=BAYANG_BIND;
     bind_counter = BAYANG_BIND_COUNT;
 	BAYANG_initialize_txid();
-	BAYANG_init();
+	BAYANG_RF_init();
 	packet_count=0;
-	return BAYANG_INITIAL_WAIT+BAYANG_PACKET_PERIOD;
 }
 
-#endif
+#endif

Multiprotocol/Binary_Signature.ino

@@ -48,6 +48,7 @@ Bit(s)  Bitmask    Option                  Comment
 11      0x400      MULTI_STATUS            Indicates if MULTI_STATUS is defined
 12      0x800      MULTI_TELEMETRY         Indicates if MULTI_TELEMETRY is defined
 13      0x1000     DEBUG_SERIAL            Indicates if DEBUG_SERIAL is defined
+14-16   0xE000     Module sub-type         Reads as a three-bit value indicating a number from 0-7 which maps to a module sub-type (right-shift 13 bits to read)
 
 The 8-byte version number is the version number zero-padded to a fixed width of two-bytes per segment and no separator.  
 E.g. 1.2.3.45 becomes 01020345.
@@ -60,9 +61,15 @@ OpenTX            2               10
 
 Module types are mapped to the following decimal / binary values:
 Module Type       Decimal Value   Binary Valsue
-AVR               0               00
-STM32             1               01
-OrangeRX          2               10
+AVR (Atmega328p)  0               00
+STM32 (F103)      1               01
+OrangeRX (Xmega)  2               10
+
+Module sub-type is currently used for STM32F103 only and is mapped as follows:
+Module Type       Sub Type        Decimal Value    Binary Value
+STM32 (F103)      STM32F103CB     0                000
+STM32 (F103)      STM32F103C8     1                001
+STM32 (F103)      T18 5in1        2                010
 
 Channel orders are mapped to the following decimal / binary values:
 Channel Order	  Decimal Value	  Binary Value
@@ -109,6 +116,17 @@ RTEA	          23	          10111
     bool firmwareFlag_DEBUG_SERIAL = true;
 #endif
 
+// STM32 Module sub-type flags
+#if defined (MCU_STM32F103CB)
+    bool firmwareFlag_MCU_STM32F103CB = true;
+#endif
+#if defined (MCU_STM32F103C8)
+    bool firmwareFlag_MCU_STM32F103C8 = true;
+#endif
+#if defined (MULTI_5IN1_INTERNAL)
+    bool firmwareFlag_MULTI_5IN1_INTERNAL = true;
+#endif
+
 // Channel order flags
 #if defined (AETR)
     bool firmwareFlag_ChannelOrder_AETR = true;

Multiprotocol/Bugs_a7105.ino

@@ -315,7 +315,7 @@ static void __attribute__((unused)) BUGS_increment_counts()
 // FIFO config is one less than desired value
 #define BUGS_FIFO_SIZE_RX      15
 #define BUGS_FIFO_SIZE_TX      21
-uint16_t ReadBUGS(void)
+uint16_t BUGS_callback(void)
 {
 	uint8_t mode, base_adr;
 	uint16_t rxid;
@@ -340,7 +340,7 @@ uint16_t ReadBUGS(void)
 		case BUGS_BIND_2:
 			//Wait for TX completion
 			start=micros();
-			while ((uint16_t)micros()-start < 500)			// Wait max 500µs, using serial+telemetry exit in about 60µs
+			while ((uint16_t)((uint16_t)micros()-start) < 500)			// Wait max 500µs, using serial+telemetry exit in about 60µs
 				if(!(A7105_ReadReg(A7105_00_MODE) & 0x01))
 					break;
 			A7105_SetTxRxMode(RX_EN);
@@ -399,7 +399,7 @@ uint16_t ReadBUGS(void)
 		case BUGS_DATA_2:
 			//Wait for TX completion
 			start=micros();
-			while ((uint16_t)micros()-start < 500)			// Wait max 500µs, using serial+telemetry exit in about 60µs
+			while ((uint16_t)((uint16_t)micros()-start) < 500)			// Wait max 500µs, using serial+telemetry exit in about 60µs
 				if(!(A7105_ReadReg(A7105_00_MODE) & 0x01))
 					break;
 			A7105_SetTxRxMode(RX_EN);
@@ -437,7 +437,7 @@ uint16_t ReadBUGS(void)
 	return packet_period;
 }
 
-uint16_t initBUGS(void)
+void BUGS_init(void)
 {
 	uint16_t rxid=0;
 	uint8_t base_adr=BUGS_EEPROM_OFFSET+(RX_num&0x0F)*2;
@@ -459,8 +459,6 @@ uint16_t initBUGS(void)
 	armed = 0;
 	arm_flags = BUGS_FLAG_DISARM;		// initial value from captures
 	arm_channel_previous = BUGS_CH_SW_ARM;
-
-	return 10000;
 }
 
 #endif

Multiprotocol/CABELL_nrf224l01.ino

@@ -190,7 +190,9 @@ static void __attribute__((unused)) CABELL_send_packet(uint8_t bindMode)
 		}
 		TxPacket.option = (bindMode) ? (option & (~CABELL_OPTION_MASK_CHANNEL_REDUCTION)) : option;		//remove channel reduction if in bind mode
 	}
-	TxPacket.reserved = 0;
+ 
+	rf_ch_num = CABELL_getNextChannel (hopping_frequency,CABELL_RADIO_CHANNELS, rf_ch_num);
+	TxPacket.reserved = rf_ch_num & 0x3F;
 	TxPacket.modelNum = RX_num;
 	uint16_t checkSum = TxPacket.modelNum + TxPacket.option + TxPacket.RxMode  + TxPacket.reserved;		// Start Calculate checksum
 
@@ -244,7 +246,6 @@ static void __attribute__((unused)) CABELL_send_packet(uint8_t bindMode)
 	TxPacket.checkSum_LSB = checkSum & 0x00FF;
 
 	// Set channel for next transmission
-	rf_ch_num = CABELL_getNextChannel (hopping_frequency,CABELL_RADIO_CHANNELS, rf_ch_num);
 	NRF24L01_WriteReg(NRF24L01_05_RF_CH,rf_ch_num); 
 
 	//NRF24L01_FlushTx();   //just in case things got hung up
@@ -255,7 +256,7 @@ static void __attribute__((unused)) CABELL_send_packet(uint8_t bindMode)
 	*p |= (packet_count++)<<7;   // This causes the 8th bit of the first byte to toggle with each xmit so consecutive payloads are not identical.
 	// This is a work around for a reported bug in clone NRF24L01 chips that mis-took this case for a re-transmit of the same packet.
 
-	CABELL_SetPower();
+	NRF24L01_SetPower();
 	NRF24L01_WritePayload((uint8_t*)&TxPacket, packetSize);
 
 	#if defined CABELL_HUB_TELEMETRY 
@@ -279,39 +280,44 @@ static void __attribute__((unused)) CABELL_send_packet(uint8_t bindMode)
 static void __attribute__((unused)) CABELL_getChannelSequence (uint8_t outArray[], uint8_t numChannels, uint64_t permutation)
 {
 	/* This procedure initializes an array with the sequence progression of channels.
-	* This is not the actual channels itself, but the sequence base to be used within bands of 
+	* This is not the actual channels itself, but the sequence base to be used within bands of
 	* channels.
-	* 
+	*
 	* There are numChannels! permutations for arranging the channels
 	* one of these permutations will be calculated based on the permutation input
 	* permutation should be between 1 and numChannels! but the routine will constrain it
 	* if these bounds are exceeded.  Typically the radio's unique TX ID should be used.
-	* 
+	*
 	* The maximum numChannels is 20.  Anything larger than this will cause the uint64_t
 	* variables to overflow, yielding unknown results (possibly infinite loop?).  Therefor
 	* this routine constrains the value.
-	*/  
+	*/
 	uint8_t i;   //iterator counts numChannels
-	uint64_t indexOfNextSequenceValue;
-	uint64_t numChannelsFactorial=1;
+	uint32_t indexOfNextSequenceValue;
+	uint32_t numChannelsFactorial=1;
+	uint32_t perm32 ;
 	uint8_t  sequenceValue;
 
-	numChannels = constrain(numChannels,1,20);
+	numChannels = constrain(numChannels,1,9);
 
 	for (i = 1; i <= numChannels;i++)
 	{
-		numChannelsFactorial *= i;      //  Calculate n!
-		outArray[i-1] = i-1;            //  Initialize array with the sequence
+		numChannelsFactorial *= i;					//  Calculate n!
+		outArray[i-1] = i-1;						//  Initialize array with the sequence
 	}
 
-	permutation = (permutation % numChannelsFactorial) + 1;    // permutation must be between 1 and n! or this algorithm will infinite loop
+	perm32 = permutation >> 8 ;						// Shift 40 bit input to 32 bit
+	perm32 = (perm32 % numChannelsFactorial);		// permutation must be between 1 and n! or this algorithm will infinite loop
+	perm32 <<= 8 ;									// Shift back 8 bits
+	perm32 += permutation & 0x00FF ;				// Tack on least 8 bits
+	perm32 = (perm32 % numChannelsFactorial) + 1;	// permutation must be between 1 and n! or this algorithm will infinite loop
 
 	//Rearrange the array elements based on the permutation selected
-	for (i=0, permutation--; i<numChannels; i++ )
+	for (i=0, perm32--; i<numChannels; i++ )
 	{
-		numChannelsFactorial /= ((uint64_t)numChannels)-i;
-		indexOfNextSequenceValue = i+(permutation/numChannelsFactorial);
-		permutation %= numChannelsFactorial;
+		numChannelsFactorial /= numChannels-i;
+		indexOfNextSequenceValue = i+(perm32/numChannelsFactorial);
+		perm32 %= numChannelsFactorial;
 
 		//Copy the value in the selected array position
 		sequenceValue = outArray[indexOfNextSequenceValue];
@@ -356,48 +362,18 @@ static void __attribute__((unused)) CABELL_setAddress()
 }
 
 //-----------------------------------------------------------------------------------------
-static void __attribute__((unused)) CABELL_init()
+static void __attribute__((unused)) CABELL_RF_init()
 {
 	NRF24L01_Initialize();
-	CABELL_SetPower();
+
 	NRF24L01_SetBitrate(NRF24L01_BR_250K);				// slower data rate gives better range/reliability
-	NRF24L01_WriteReg(NRF24L01_01_EN_AA, 0x00);			// No Auto Acknowledgment on all data pipes  
-	NRF24L01_SetTxRxMode(TX_EN);						//Power up and 16 bit CRC
-
 	CABELL_setAddress();
-
-	NRF24L01_WriteReg(NRF24L01_07_STATUS, 0x70);
-	NRF24L01_FlushTx();
-	NRF24L01_FlushRx();
-	NRF24L01_WriteReg(NRF24L01_02_EN_RXADDR, 0x01);
 	NRF24L01_WriteReg(NRF24L01_11_RX_PW_P0, 0x20);		// 32 byte packet length
 	NRF24L01_WriteReg(NRF24L01_12_RX_PW_P1, 0x20);		// 32 byte packet length
-	NRF24L01_WriteReg(NRF24L01_03_SETUP_AW, 0x03);
-	NRF24L01_WriteReg(NRF24L01_04_SETUP_RETR, 0x5F);	// no retransmits
-	NRF24L01_Activate(0x73);							// Activate feature register
 	NRF24L01_WriteReg(NRF24L01_1C_DYNPD, 0x3F);			// Enable dynamic payload length on all pipes
 	NRF24L01_WriteReg(NRF24L01_1D_FEATURE, 0x04);		// Enable dynamic Payload Length
-	NRF24L01_Activate(0x73);
-	prev_power = NRF_POWER_0;
-}
 
-//-----------------------------------------------------------------------------------------
-static void CABELL_SetPower()    // This over-ride the standard Set Power to allow an flag in option to indicate max power setting
-                          // Note that on many modules max power may actually be worse than the normal high power setting
-                          // test and only use max if it helps the range
-{
-	if(IS_BIND_DONE && !IS_RANGE_FLAG_on && ((option & CABELL_OPTION_MASK_MAX_POWER_OVERRIDE) != 0))
-	{   // If we are not in range or bind mode and power setting override is in effect, then set max power, else standard power logic
-		if(prev_power != NRF_POWER_3)   // prev_power is global variable for NRF24L01; NRF_POWER_3 is max power
-		{
-			uint8_t rf_setup = NRF24L01_ReadReg(NRF24L01_06_RF_SETUP);
-			rf_setup = (rf_setup & 0xF9) | (NRF_POWER_3 << 1);
-			NRF24L01_WriteReg(NRF24L01_06_RF_SETUP, rf_setup);
-			prev_power=NRF_POWER_3;
-		}    
-	}
-	else
-		NRF24L01_SetPower();
+	NRF24L01_SetTxRxMode(TX_EN);						// Clear data ready, data sent, retransmit and enable CRC 16bits, ready for TX
 }
 
 //-----------------------------------------------------------------------------------------
@@ -414,7 +390,7 @@ uint16_t CABELL_callback()
 	else if (bind_counter == 0)
 	{
 		BIND_DONE;
-		CABELL_init();   // non-bind address 
+		CABELL_RF_init();   // non-bind address 
 	}
 	else
 	{
@@ -425,17 +401,15 @@ uint16_t CABELL_callback()
 }
 
 //-----------------------------------------------------------------------------------------
-uint16_t initCABELL(void)
+void CABELL_init(void)
 {
 	if (IS_BIND_DONE)
 		bind_counter = 0;
 	else  
 		bind_counter = CABELL_BIND_COUNT;
-	CABELL_init();
+	CABELL_RF_init();
 
 	packet_period = CABELL_PACKET_PERIOD;
-
-	return packet_period;
 }
 
 #endif

Multiprotocol/CC2500_SPI.ino

@@ -163,4 +163,128 @@ void CC2500_SetPower()
 		prev_power=power;
 	}
 }
+
+void __attribute__((unused)) CC2500_SetFreqOffset()
+{
+	if(prev_option != option)
+	{
+		prev_option = option;
+		CC2500_WriteReg(CC2500_0C_FSCTRL0, option);
+	}
+}
+
+void __attribute__((unused)) CC2500_250K_Init()
+{
+	CC2500_Strobe(CC2500_SIDLE);
+
+	// Address Config = No address check
+	// Base Frequency = 2400
+	// CRC Autoflush = false
+	// CRC Enable = false
+	// Channel Spacing = 333.251953
+	// Data Format = Normal mode
+	// Data Rate = 249.939
+	// Deviation = 126.953125
+	// Device Address = 0
+	// Manchester Enable = false
+	// Modulated = true
+	// Modulation Format = GFSK
+	// Packet Length Mode = Variable packet length mode. Packet length configured by the first byte after sync word
+	// RX Filter BW = 203.125000
+	// Sync Word Qualifier Mode = No preamble/sync
+	// TX Power = 0
+	// Whitening = false
+	// Fast Frequency Hopping - no PLL auto calibration
+/*	//Previous config
+	CC2500_WriteReg(CC2500_08_PKTCTRL0,	0x01);   // Packet Automation Control
+	CC2500_WriteReg(CC2500_0B_FSCTRL1,	0x0A);   // Frequency Synthesizer Control
+	CC2500_WriteReg(CC2500_0C_FSCTRL0, option);  // Frequency offset hack 
+	CC2500_WriteReg(CC2500_0D_FREQ2,	0x5C);   // Frequency Control Word, High Byte
+	CC2500_WriteReg(CC2500_0E_FREQ1,	0x4E);   // Frequency Control Word, Middle Byte
+	CC2500_WriteReg(CC2500_0F_FREQ0,	0xC3);   // Frequency Control Word, Low Byte
+	CC2500_WriteReg(CC2500_10_MDMCFG4,	0x8D);   // Modem Configuration
+	CC2500_WriteReg(CC2500_11_MDMCFG3,	0x3B);   // Modem Configuration
+	CC2500_WriteReg(CC2500_12_MDMCFG2,	0x10);   // Modem Configuration
+	CC2500_WriteReg(CC2500_13_MDMCFG1,	0x23);   // Modem Configuration
+	CC2500_WriteReg(CC2500_14_MDMCFG0,	0xA4);   // Modem Configuration
+	CC2500_WriteReg(CC2500_15_DEVIATN,	0x62);   // Modem Deviation Setting
+	CC2500_WriteReg(CC2500_18_MCSM0,	0x08);   // Main Radio Control State Machine Configuration
+	CC2500_WriteReg(CC2500_19_FOCCFG,	0x1D);   // Frequency Offset Compensation Configuration
+	CC2500_WriteReg(CC2500_1A_BSCFG,	0x1C);   // Bit Synchronization Configuration
+	CC2500_WriteReg(CC2500_1B_AGCCTRL2, 0xC7);   // AGC Control
+	CC2500_WriteReg(CC2500_1C_AGCCTRL1, 0x00);   // AGC Control
+	CC2500_WriteReg(CC2500_1D_AGCCTRL0, 0xB0);   // AGC Control
+	CC2500_WriteReg(CC2500_21_FREND1,	0xB6);   // Front End RX Configuration
+	CC2500_WriteReg(CC2500_23_FSCAL3,	0xEA);   // Frequency Synthesizer Calibration
+	CC2500_WriteReg(CC2500_25_FSCAL1,	0x00);   // Frequency Synthesizer Calibration
+	CC2500_WriteReg(CC2500_26_FSCAL0,	0x11);   // Frequency Synthesizer Calibration
+*/
+	CC2500_WriteReg(CC2500_07_PKTCTRL1, 0x05);   // Packet Automation Control, address check true auto append RSSI & LQI
+	CC2500_WriteReg(CC2500_08_PKTCTRL0, 0x00);   // Packet Automation Control, fixed packet len
+	CC2500_WriteReg(CC2500_0B_FSCTRL1,  0x0A);   // Frequency Synthesizer Control (IF Frequency)
+	CC2500_WriteReg(CC2500_0C_FSCTRL0,  0x00);   // Frequency Synthesizer Control
+	CC2500_WriteReg(CC2500_0D_FREQ2,    0x5C);   // Frequency Control Word, High Byte
+	CC2500_WriteReg(CC2500_0E_FREQ1,    0x4E);   // Frequency Control Word, Middle Byte
+	CC2500_WriteReg(CC2500_0F_FREQ0,    0xC5);   // Frequency Control Word, Low Byte
+	CC2500_WriteReg(CC2500_10_MDMCFG4,  0x3D);   // Modem Configuration  Set to 406kHz BW filter
+	CC2500_WriteReg(CC2500_11_MDMCFG3,  0x3B);   // Modem Configuration
+	CC2500_WriteReg(CC2500_12_MDMCFG2,	0x10);   // Modem Configuration, GFSK, no preambule and no sync word -> TX by default
+	CC2500_WriteReg(CC2500_13_MDMCFG1,  0x03);   // Modem Configuration, 2 bytes of preamble
+	CC2500_WriteReg(CC2500_14_MDMCFG0,  0xA4);   // Modem Configuration
+	CC2500_WriteReg(CC2500_15_DEVIATN,  0x62);   // Modem Deviation Setting
+	CC2500_WriteReg(CC2500_18_MCSM0,    0x08);   // Main Radio Control State Machine Configuration
+	CC2500_WriteReg(CC2500_19_FOCCFG,   0x1D);   // Frequency Offset Compensation Configuration
+	CC2500_WriteReg(CC2500_1A_BSCFG,    0x1C);   // Bit Synchronization Configuration
+	CC2500_WriteReg(CC2500_1B_AGCCTRL2, 0xC7);   // AGC Control
+	CC2500_WriteReg(CC2500_1C_AGCCTRL1, 0x00);   // AGC Control
+	CC2500_WriteReg(CC2500_1D_AGCCTRL0, 0xB0);   // AGC Control
+	CC2500_WriteReg(CC2500_21_FREND1,   0xB6);   // Front End RX Configuration
+	CC2500_WriteReg(CC2500_23_FSCAL3,   0xEA);   // Frequency Synthesizer Calibration
+	CC2500_WriteReg(CC2500_25_FSCAL1,   0x00);   // Frequency Synthesizer Calibration
+	CC2500_WriteReg(CC2500_26_FSCAL0,   0x11);   // Frequency Synthesizer Calibration
+	
+	//Prep RX
+	// Set first 3 bytes of rx addr in [0]->SYNC1, [1]->SYNC0 and [2]->ADDR
+	// CC2500_WriteReg(CC2500_04_SYNC1,    [0]);   // Sync word, high byte
+	// CC2500_WriteReg(CC2500_05_SYNC0,    [1]);   // Sync word, low byte
+	// CC2500_WriteReg(CC2500_09_ADDR,     [2]);   // Set addr
+	//RX
+	// CC2500_WriteReg(CC2500_12_MDMCFG2,  0x12);  // Modem Configuration, GFSK, 16/16 Sync Word TX&RX
+	//TX
+	// CC2500_WriteReg(CC2500_12_MDMCFG2,	0x10); // Modem Configuration, GFSK, no preambule and no sync word
+	// need to set packet length before sending/receiving
+	// CC2500_WriteReg(CC2500_06_PKTLEN,   cc2500_packet_len);  // Packet len, fix packet len
+
+	CC2500_SetTxRxMode(TX_EN);
+	CC2500_SetPower();
+}
+void __attribute__((unused)) CC2500_250K_HoppingCalib(uint8_t num_freq)
+{
+	for (uint8_t i = 0; i < num_freq; i++)
+	{
+		CC2500_Strobe(CC2500_SIDLE);
+		// spacing is 333.25 kHz, must multiply channel by 3
+		CC2500_WriteReg(CC2500_0A_CHANNR, hopping_frequency[i]*3);
+		// calibrate
+		CC2500_Strobe(CC2500_SCAL);
+		delayMicroseconds(900);
+		calData[i]=CC2500_ReadReg(CC2500_25_FSCAL1);
+	}
+}
+void __attribute__((unused)) CC2500_250K_Hopping(uint8_t index)
+{
+	// spacing is 333.25 kHz, must multiply channel by 3
+	CC2500_WriteReg(CC2500_0A_CHANNR, hopping_frequency[index] * 3);
+	// set PLL calibration
+	CC2500_WriteReg(CC2500_25_FSCAL1, calData[index]);
+}
+void __attribute__((unused)) CC2500_250K_RFChannel(uint8_t number)
+{
+	CC2500_Strobe(CC2500_SIDLE);
+	// spacing is 333.25 kHz, must multiply channel by 3
+	CC2500_WriteReg(CC2500_0A_CHANNR, number*3);
+	// calibrate
+	CC2500_Strobe(CC2500_SCAL);
+	delayMicroseconds(900);
+}
 #endif

Multiprotocol/CFlie_nrf24l01.ino

@@ -644,37 +644,24 @@ static uint8_t crtp_log_setup_state_machine()
     return state_machine_completed;
 }
 
-static int cflie_init()
+static void CFLIE_RF_init()
 {
     NRF24L01_Initialize();
 
     // CRC, radio on
-    NRF24L01_SetTxRxMode(TX_EN);
-    NRF24L01_WriteReg(NRF24L01_00_CONFIG, _BV(NRF24L01_00_EN_CRC) | _BV(NRF24L01_00_CRCO) | _BV(NRF24L01_00_PWR_UP)); 
     NRF24L01_WriteReg(NRF24L01_01_EN_AA, 0x01);              // Auto Acknowledgement for data pipe 0
-    NRF24L01_WriteReg(NRF24L01_02_EN_RXADDR, 0x01);          // Enable data pipe 0
-    NRF24L01_WriteReg(NRF24L01_03_SETUP_AW, TX_ADDR_SIZE-2); // 5-byte RX/TX address
     NRF24L01_WriteReg(NRF24L01_04_SETUP_RETR, 0x13);         // 3 retransmits, 500us delay
 
     NRF24L01_WriteReg(NRF24L01_05_RF_CH, rf_ch_num);        // Defined in initialize_rx_tx_addr
     NRF24L01_SetBitrate(data_rate);                          // Defined in initialize_rx_tx_addr
 
-    NRF24L01_SetPower();
-    NRF24L01_WriteReg(NRF24L01_07_STATUS, 0x70);             // Clear data ready, data sent, and retransmit
-
     NRF24L01_WriteRegisterMulti(NRF24L01_0A_RX_ADDR_P0, rx_tx_addr, TX_ADDR_SIZE);
     NRF24L01_WriteRegisterMulti(NRF24L01_10_TX_ADDR, rx_tx_addr, TX_ADDR_SIZE);
 
-    // this sequence necessary for module from stock tx
-    NRF24L01_ReadReg(NRF24L01_1D_FEATURE);
-    NRF24L01_Activate(0x73);                          // Activate feature register
-    NRF24L01_ReadReg(NRF24L01_1D_FEATURE);
-
     NRF24L01_WriteReg(NRF24L01_1C_DYNPD, 0x01);       // Enable Dynamic Payload Length on pipe 0
     NRF24L01_WriteReg(NRF24L01_1D_FEATURE, 0x06);     // Enable Dynamic Payload Length, enable Payload with ACK
 
-    // 50ms delay in callback
-    return 50000;
+	NRF24L01_SetTxRxMode(TX_EN);						// Clear data ready, data sent, retransmit and enable CRC 16bits, ready for TX
 }
 
 // TODO: Fix telemetry
@@ -749,7 +736,7 @@ static int cflie_init()
 //     }
 // }
 
-static uint16_t cflie_callback()
+static uint16_t CFLIE_callback()
 {
     switch (phase) {
     case CFLIE_INIT_SEARCH:
@@ -799,7 +786,7 @@ static uint16_t cflie_callback()
 }
 
 // Generate address to use from TX id and manufacturer id (STM32 unique id)
-static uint8_t initialize_rx_tx_addr()
+static uint8_t CFLIE_initialize_rx_tx_addr()
 {
     rx_tx_addr[0] = 
     rx_tx_addr[1] = 
@@ -844,19 +831,15 @@ static uint8_t initialize_rx_tx_addr()
     return CFLIE_INIT_SEARCH;
 }
 
-uint16_t initCFlie(void)
+void CFLIE_init(void)
 {
 	BIND_IN_PROGRESS;	// autobind protocol
 
-    phase = initialize_rx_tx_addr();
+    phase = CFLIE_initialize_rx_tx_addr();
     crtp_log_setup_state = CFLIE_CRTP_LOG_SETUP_STATE_INIT;
     packet_count=0;
 
-    int delay = cflie_init();
-
-    // debugln("CFlie init!");
-
-	return delay;
+    CFLIE_RF_init();
 }
 
 #endif

Multiprotocol/CG023_nrf24l01.ino

@@ -16,7 +16,7 @@
 
 #if defined(CG023_NRF24L01_INO)
 
-#include "iface_nrf24l01.h"
+#include "iface_xn297.h"
 
 #define CG023_PACKET_PERIOD		8200 // Timeout for callback in uSec
 #define CG023_INITIAL_WAIT		500
@@ -49,7 +49,7 @@ enum YD829_FLAGS {
     YD829_FLAG_STILL    = 0x80,
 };
 
-static void __attribute__((unused)) CG023_send_packet(uint8_t bind)
+static void __attribute__((unused)) CG023_send_packet()
 {
 	// throttle : 0x00 - 0xFF
 	throttle=convert_channel_8b(THROTTLE);
@@ -62,10 +62,16 @@ static void __attribute__((unused)) CG023_send_packet(uint8_t bind)
 	// aileron : 0x43 - 0x7F - 0xBB
 	aileron = convert_channel_16b_limit(AILERON, 0x43, 0xBB); 
 	
-	if (bind)
+	if (IS_BIND_IN_PROGRESS)
+	{
 		packet[0]= 0xaa;
+		XN297_RFChannel(CG023_RF_BIND_CHANNEL);
+	}
 	else
+	{
 		packet[0]= 0x55;
+		XN297_RFChannel(hopping_frequency_no);
+	}
 	// transmitter id
 	packet[1] = rx_tx_addr[0]; 
 	packet[2] = rx_tx_addr[1];
@@ -85,7 +91,7 @@ static void __attribute__((unused)) CG023_send_packet(uint8_t bind)
 	if(sub_protocol==CG023)
 	{
 		// rate
-		packet[13] =					  CG023_FLAG_RATE_HIGH
+		packet[13] =				  CG023_FLAG_RATE_HIGH
 					| GET_FLAG(CH5_SW,CG023_FLAG_FLIP)
 					| GET_FLAG(CH6_SW,CG023_FLAG_LED_OFF)
 					| GET_FLAG(CH7_SW,CG023_FLAG_STILL)
@@ -95,7 +101,7 @@ static void __attribute__((unused)) CG023_send_packet(uint8_t bind)
 	else
 	{// YD829
 		// rate
-		packet[13] =					  YD829_FLAG_RATE_HIGH
+		packet[13] =				  YD829_FLAG_RATE_HIGH
 					| GET_FLAG(CH5_SW,YD829_FLAG_FLIP)
 					| GET_FLAG(CH7_SW,YD829_FLAG_STILL)
 					| GET_FLAG(CH8_SW,YD829_FLAG_VIDEO)
@@ -103,79 +109,52 @@ static void __attribute__((unused)) CG023_send_packet(uint8_t bind)
 	}
 	packet[14] = 0;
 	
-	// Power on, TX mode, 2byte CRC
-	// Why CRC0? xn297 does not interpret it - either 16-bit CRC or nothing
-	XN297_Configure(_BV(NRF24L01_00_EN_CRC) | _BV(NRF24L01_00_CRCO) | _BV(NRF24L01_00_PWR_UP));
-	if (bind)
-		NRF24L01_WriteReg(NRF24L01_05_RF_CH, CG023_RF_BIND_CHANNEL);
-	else
-		NRF24L01_WriteReg(NRF24L01_05_RF_CH, hopping_frequency_no);
-
-	// clear packet status bits and TX FIFO
-	NRF24L01_WriteReg(NRF24L01_07_STATUS, 0x70);
-	NRF24L01_FlushTx();
+	// Send
+	XN297_SetTxRxMode(TX_EN);
+	XN297_SetPower();
 	XN297_WritePayload(packet, CG023_PACKET_SIZE);
-
-	NRF24L01_SetPower();	// Set tx_power
 }
 
-static void __attribute__((unused)) CG023_init()
+static void __attribute__((unused)) CG023_RF_init()
 {
-    NRF24L01_Initialize();
-    NRF24L01_SetTxRxMode(TX_EN);
-	XN297_SetTXAddr((uint8_t *)"\x26\xA8\x67\x35\xCC", 5);
+	XN297_Configure(XN297_CRCEN, XN297_SCRAMBLED, XN297_1M);
 
-    NRF24L01_FlushTx();
-    NRF24L01_FlushRx();
-    NRF24L01_WriteReg(NRF24L01_07_STATUS, 0x70);     // Clear data ready, data sent, and retransmit
-    NRF24L01_WriteReg(NRF24L01_01_EN_AA, 0x00);      // No Auto Acknowldgement on all data pipes
-    NRF24L01_WriteReg(NRF24L01_02_EN_RXADDR, 0x01);  // Enable data pipe 0 only
-    NRF24L01_WriteReg(NRF24L01_04_SETUP_RETR, 0x00); // no retransmits
-    NRF24L01_SetBitrate(NRF24L01_BR_1M);             // 1Mbps
-    NRF24L01_SetPower();
+	XN297_SetTXAddr((uint8_t *)"\x26\xA8\x67\x35\xCC", 5);
 }
 
 uint16_t CG023_callback()
 {
-	if(IS_BIND_DONE)
-	{
-		#ifdef MULTI_SYNC
-			telemetry_set_input_sync(packet_period);
-		#endif
-		CG023_send_packet(0);
-	}
-	else
+	#ifdef MULTI_SYNC
+		telemetry_set_input_sync(packet_period);
+	#endif
+	if(bind_counter)
 	{
+		bind_counter--;
 		if (bind_counter == 0)
 			BIND_DONE;
-		else
-		{
-			CG023_send_packet(1);
-			bind_counter--;
-		}
 	}
+	CG023_send_packet();
 	return	packet_period;
 }
 
 static void __attribute__((unused)) CG023_initialize_txid()
 {
 	rx_tx_addr[0]= 0x80 | (rx_tx_addr[0] % 0x40);
-	if( rx_tx_addr[0] == 0xAA)			// avoid using same freq for bind and data channel
+	if( rx_tx_addr[0] == 0xAA)						// avoid using same freq for bind and data channel
 		rx_tx_addr[0] ++;
 	hopping_frequency_no = rx_tx_addr[0] - 0x7D;	// rf channel for data packets
 }
 
-uint16_t initCG023(void)
+void CG023_init(void)
 {
 	BIND_IN_PROGRESS;	// autobind protocol
     bind_counter = CG023_BIND_COUNT;
 	CG023_initialize_txid();
-	CG023_init();
+	CG023_RF_init();
 	if(sub_protocol==CG023)
 		packet_period=CG023_PACKET_PERIOD;
 	else // YD829
 		packet_period=YD829_PACKET_PERIOD;
-	return	CG023_INITIAL_WAIT+YD829_PACKET_PERIOD;
 }
 
 #endif

Multiprotocol/CX10_nrf24l01.ino

@@ -17,19 +17,19 @@
 
 #if defined(CX10_NRF24L01_INO)
 
-#include "iface_nrf24l01.h"
+#include "iface_xn297.h"
 
-#define CX10_BIND_COUNT		4360   // 6 seconds
+#define CX10_BIND_COUNT		4360	// 6 seconds
 #define CX10_PACKET_SIZE	15
-#define CX10A_PACKET_SIZE	19       // CX10 blue board packets have 19-byte payload
+#define CX10A_PACKET_SIZE	19		// CX10 blue board packets have 19-byte payload
 #define Q2X2_PACKET_SIZE	21
-#define CX10_PACKET_PERIOD	1316  // Timeout for callback in uSec
+#define CX10_PACKET_PERIOD	1316	// Timeout for callback in uSec
 #define CX10A_PACKET_PERIOD	6000
 
 #define CX10_INITIAL_WAIT     500
 
 // flags
-#define CX10_FLAG_FLIP       0x10 // goes to rudder channel
+#define CX10_FLAG_FLIP       0x10	// goes to rudder channel
 #define CX10_FLAG_MODE_MASK  0x03
 #define CX10_FLAG_HEADLESS   0x04
 // flags2
@@ -46,12 +46,12 @@ enum {
     CX10_DATA
 };
 
-static void __attribute__((unused)) CX10_Write_Packet(uint8_t bind)
+static void __attribute__((unused)) CX10_Write_Packet()
 {
 	uint8_t offset = 0;
 	if(sub_protocol == CX10_BLUE)
 		offset = 4;
-	packet[0] = bind ? 0xAA : 0x55;
+	packet[0] = IS_BIND_IN_PROGRESS ? 0xAA : 0x55;
 	packet[1] = rx_tx_addr[0];
 	packet[2] = rx_tx_addr[1];
 	packet[3] = rx_tx_addr[2];
@@ -62,57 +62,57 @@ static void __attribute__((unused)) CX10_Write_Packet(uint8_t bind)
 	uint16_t throttle=convert_channel_16b_limit(THROTTLE,1000,2000);
 	uint16_t rudder=  convert_channel_16b_limit(RUDDER  ,2000,1000);
     // Channel 5 - flip flag
-	packet[12+offset] = GET_FLAG(CH5_SW,CX10_FLAG_FLIP); // flip flag applied on rudder
+	packet[12+offset] = GET_FLAG(CH5_SW,CX10_FLAG_FLIP); 	// flip flag applied on rudder
 
 	// Channel 6 - rate mode is 2 lsb of packet 13
-	if(CH6_SW)		// rate 3 / headless on CX-10A
+	if(CH6_SW)												// rate 3 / headless on CX-10A
 		flags = 0x02;
 	else
 		if(Channel_data[CH6] < CHANNEL_MIN_COMMAND)
-			flags = 0x00;			// rate 1
+			flags = 0x00;									// rate 1
 		else
-			flags = 0x01;			// rate 2
-	uint8_t flags2=0;	// packet 14
+			flags = 0x01;									// rate 2
+	uint8_t flags2=0;										// packet 14
 
 	uint8_t video_state=packet[14] & 0x21;
 	switch(sub_protocol)
 	{
 		case CX10_BLUE:
-			flags |= GET_FLAG(!CH7_SW, 0x10)	// Channel 7 - picture
-					|GET_FLAG( CH8_SW, 0x08);	// Channel 8 - video
+			flags |= GET_FLAG(!CH7_SW, 0x10)				// Channel 7 - picture
+					|GET_FLAG( CH8_SW, 0x08);				// Channel 8 - video
 			break;
 		case F_Q282:
 		case F_Q242:
 		case F_Q222:
 			memcpy(&packet[15], "\x10\x10\xaa\xaa\x00\x00", 6);
 			//FLIP|LED|PICTURE|VIDEO|HEADLESS|RTH|XCAL|YCAL
-			flags2 = GET_FLAG(CH5_SW, 0x80)		// Channel 5 - FLIP
-					|GET_FLAG(!CH6_SW, 0x40)	// Channel 6 - LED
-					|GET_FLAG(CH9_SW, 0x08)		// Channel 9 - HEADLESS
-					|GET_FLAG(CH11_SW, 0x04)		// Channel 11 - XCAL
-					|GET_FLAG(CH12_SW, 0x02);	// Channel 12 - YCAL or Start/Stop motors on JXD 509
+			flags2 = GET_FLAG(CH5_SW, 0x80)					// Channel 5 - FLIP
+					|GET_FLAG(!CH6_SW, 0x40)				// Channel 6 - LED
+					|GET_FLAG(CH9_SW, 0x08)					// Channel 9 - HEADLESS
+					|GET_FLAG(CH11_SW, 0x04)				// Channel 11 - XCAL
+					|GET_FLAG(CH12_SW, 0x02);				// Channel 12 - YCAL or Start/Stop motors on JXD 509
 	
 			if(sub_protocol==F_Q242)
 			{
 				flags=2;
-				flags2|= GET_FLAG(CH7_SW,0x01)	// Channel 7 - picture
-						|GET_FLAG(CH8_SW,0x10);	// Channel 8 - video
+				flags2|= GET_FLAG(CH7_SW,0x01)				// Channel 7 - picture
+						|GET_FLAG(CH8_SW,0x10);				// Channel 8 - video
 				packet[17]=0x00;
 				packet[18]=0x00;
 			}
 			else
 			{ // F_Q282 & F_Q222
-				flags=3;							// expert
-				if(CH8_SW)						// Channel 8 - F_Q282 video / F_Q222 Module 1
+				flags=3;									// expert
+				if(CH8_SW)									// Channel 8 - F_Q282 video / F_Q222 Module 1
 				{
 					if (!(video_state & 0x20)) video_state ^= 0x21;
 				}
 				else
 					if (video_state & 0x20) video_state &= 0x01;
 				flags2 |= video_state
-						|GET_FLAG(CH7_SW,0x10);	// Channel 7 - F_Q282 picture / F_Q222 Module 2
+						|GET_FLAG(CH7_SW,0x10);				// Channel 7 - F_Q282 picture / F_Q222 Module 2
 			}
-			if(CH10_SW)	flags |=0x80;			// Channel 10 - RTH
+			if(CH10_SW)	flags |=0x80;						// Channel 10 - RTH
 			break;
 		case DM007:
 			aileron = 3000 - aileron;
@@ -128,16 +128,16 @@ static void __attribute__((unused)) CX10_Write_Packet(uint8_t bind)
 			if(CH8_SW)	packet[12] &= ~CX10_FLAG_FLIP;
 		case JC3015_1:
 			//FLIP|MODE|PICTURE|VIDEO
-			flags2=	 GET_FLAG(CH7_SW,_BV(3))	// Channel 7
-					|GET_FLAG(CH8_SW,_BV(4));	// Channel 8
+			flags2=	 GET_FLAG(CH7_SW,_BV(3))				// Channel 7
+					|GET_FLAG(CH8_SW,_BV(4));				// Channel 8
 			break;
 		case MK33041:
 			elevator = 3000 - elevator;
 			//FLIP|MODE|PICTURE|VIDEO|HEADLESS|RTH
-			flags|=GET_FLAG(CH7_SW,_BV(7))	// Channel 7 - picture
-				  |GET_FLAG(CH10_SW,_BV(2));	// Channel 10 - rth
-			flags2=GET_FLAG(CH8_SW,_BV(0))	// Channel 8 - video
-				  |GET_FLAG(CH9_SW,_BV(5));	// Channel 9 - headless
+			flags|=GET_FLAG(CH7_SW,_BV(7))					// Channel 7 - picture
+				  |GET_FLAG(CH10_SW,_BV(2));				// Channel 10 - rth
+			flags2=GET_FLAG(CH8_SW,_BV(0))					// Channel 8 - video
+				  |GET_FLAG(CH9_SW,_BV(5));					// Channel 9 - headless
 			break;
 	}
 	packet[5+offset] = lowByte(aileron);
@@ -151,39 +151,23 @@ static void __attribute__((unused)) CX10_Write_Packet(uint8_t bind)
 	packet[13+offset]=flags;
 	packet[14+offset]=flags2;
 	
-	// Power on, TX mode, 2byte CRC
-	// Why CRC0? xn297 does not interpret it - either 16-bit CRC or nothing
-	XN297_Configure(_BV(NRF24L01_00_EN_CRC) | _BV(NRF24L01_00_CRCO) | _BV(NRF24L01_00_PWR_UP));
-	if (bind)
-		NRF24L01_WriteReg(NRF24L01_05_RF_CH, CX10_RF_BIND_CHANNEL);
-	else
+	// Send
+	if(IS_BIND_DONE)
 	{
-		NRF24L01_WriteReg(NRF24L01_05_RF_CH, hopping_frequency[hopping_frequency_no++]);
+		XN297_Hopping(hopping_frequency_no++);
 		hopping_frequency_no %= CX10_NUM_RF_CHANNELS;
 	}
-	// clear packet status bits and TX FIFO
-	NRF24L01_WriteReg(NRF24L01_07_STATUS, 0x70);
-	NRF24L01_FlushTx();
-
+	XN297_SetPower();
+	XN297_SetTxRxMode(TX_EN);
 	XN297_WritePayload(packet, packet_length);
-	NRF24L01_SetPower();
 }
 
-static void __attribute__((unused)) CX10_init()
+static void __attribute__((unused)) CX10_RF_init()
 {
-	NRF24L01_Initialize();
-	NRF24L01_SetTxRxMode(TX_EN);
-	XN297_SetTXAddr((uint8_t *)"\xcc\xcc\xcc\xcc\xcc",5);
-	XN297_SetRXAddr((uint8_t *)"\xcc\xcc\xcc\xcc\xcc",5);
-	NRF24L01_FlushTx();
-	NRF24L01_FlushRx();
-	NRF24L01_WriteReg(NRF24L01_07_STATUS, 0x70);			// Clear data ready, data sent, and retransmit
-	NRF24L01_WriteReg(NRF24L01_01_EN_AA, 0x00);				// No Auto Acknowledgment on all data pipes
-	NRF24L01_WriteReg(NRF24L01_02_EN_RXADDR, 0x01);			// Enable data pipe 0 only
-	NRF24L01_WriteReg(NRF24L01_11_RX_PW_P0, packet_length);	// rx pipe 0 (used only for blue board)
-    NRF24L01_WriteReg(NRF24L01_05_RF_CH, CX10_RF_BIND_CHANNEL);
-	NRF24L01_SetBitrate(NRF24L01_BR_1M);					// 1Mbps
-	NRF24L01_SetPower();
+	XN297_Configure(XN297_CRCEN, XN297_SCRAMBLED, XN297_1M);
+	XN297_SetTXAddr((uint8_t *)"\xcc\xcc\xcc\xcc\xcc", 5);
+	XN297_SetRXAddr((uint8_t *)"\xcc\xcc\xcc\xcc\xcc", packet_length);
+	XN297_RFChannel(CX10_RF_BIND_CHANNEL);
 }
 
 uint16_t CX10_callback()
@@ -197,42 +181,39 @@ uint16_t CX10_callback()
 			}
 			else
 			{
-				CX10_Write_Packet(1);
+				CX10_Write_Packet();
 				bind_counter--;
 			}
 			break;
 		case CX10_BIND2:
-			if( NRF24L01_ReadReg(NRF24L01_07_STATUS) & _BV(NRF24L01_07_RX_DR))
+			// switch to TX mode
+			if( XN297_IsRX() )
 			{ // RX fifo data ready
-				XN297_ReadPayload(packet, packet_length);
-				NRF24L01_SetTxRxMode(TXRX_OFF);
-				NRF24L01_SetTxRxMode(TX_EN);
-				if(packet[9] == 1)
+				debugln("RX");
+				if(XN297_ReadPayload(packet, packet_length) && packet[9] == 1)
 				{
 					BIND_DONE;
+					XN297_SetTxRxMode(TXRX_OFF);
 					phase = CX10_DATA;
+					break;
 				}
 			}
 			else
 			{
-				// switch to TX mode
-				NRF24L01_SetTxRxMode(TXRX_OFF);
-				NRF24L01_FlushTx();
-				NRF24L01_SetTxRxMode(TX_EN);
-				CX10_Write_Packet(1);
-				delayMicroseconds(400);
-				// switch to RX mode
-				NRF24L01_SetTxRxMode(TXRX_OFF);
-				NRF24L01_FlushRx();
-				NRF24L01_SetTxRxMode(RX_EN);
-				XN297_Configure(_BV(NRF24L01_00_EN_CRC) | _BV(NRF24L01_00_CRCO) | _BV(NRF24L01_00_PWR_UP) | _BV(NRF24L01_00_PRIM_RX));
+				XN297_SetTxRxMode(TXRX_OFF);
+				CX10_Write_Packet();
+				// wait for packet to be sent
+				while( !XN297_IsPacketSent());					//delayMicroseconds(400);
 			}
+			// switch to RX mode
+			XN297_SetTxRxMode(TXRX_OFF);
+			XN297_SetTxRxMode(RX_EN);
 			break;
 		case CX10_DATA:
 			#ifdef MULTI_SYNC
 				telemetry_set_input_sync(packet_period);
 			#endif
-			CX10_Write_Packet(0);
+			CX10_Write_Packet();
 			break;
 	}
 	return packet_period;
@@ -260,9 +241,13 @@ static void __attribute__((unused)) CX10_initialize_txid()
 	}
 }
 
-uint16_t initCX10(void)
+void CX10_init(void)
 {
 	BIND_IN_PROGRESS;	// autobind protocol
+	
+	if(protocol == PROTO_Q2X2)
+		sub_protocol|=0x08;		// Increase the number of sub_protocols for CX-10
+	
 	if(sub_protocol==CX10_BLUE)
 	{
 		packet_length = CX10A_PACKET_SIZE;
@@ -285,8 +270,7 @@ uint16_t initCX10(void)
 		bind_counter = CX10_BIND_COUNT;
 	}
 	CX10_initialize_txid();
-	CX10_init();
-	return CX10_INITIAL_WAIT+packet_period;
+	CX10_RF_init();
 }
 
 #endif

Multiprotocol/CYRF6936_SPI.ino

@@ -79,13 +79,24 @@ uint8_t CYRF_Reset()
 void CYRF_GetMfgData(uint8_t data[])
 {
 #ifndef FORCE_CYRF_ID
-	/* Fuses power on */
-	CYRF_WriteRegister(CYRF_25_MFG_ID, 0xFF);
+	if(eeprom_read_byte((EE_ADDR)EEPROM_CID_INIT_OFFSET)==0xf0)
+	{//read Cyrf ID from EEPROM
+		for(uint8_t i=0;i<6;i++)
+			data[i] = eeprom_read_byte((EE_ADDR)EEPROM_CID_OFFSET+i);
+	}
+	else
+	{//read Cyrf ID and store it EEPROM
+		/* Fuses power on */
+		CYRF_WriteRegister(CYRF_25_MFG_ID, 0xFF);
 
-	CYRF_ReadRegisterMulti(CYRF_25_MFG_ID, data, 6);
+		CYRF_ReadRegisterMulti(CYRF_25_MFG_ID, data, 6);
+		for(uint8_t i=0;i<6;i++)
+			eeprom_write_byte((EE_ADDR)EEPROM_CID_OFFSET+i, data[i]);
+		eeprom_write_byte((EE_ADDR)EEPROM_CID_INIT_OFFSET, 0xf0);
 
-	/* Fuses power off */
-	CYRF_WriteRegister(CYRF_25_MFG_ID, 0x00); 
+		/* Fuses power off */
+		CYRF_WriteRegister(CYRF_25_MFG_ID, 0x00);
+	}
 #else
 	memcpy(data,FORCE_CYRF_ID,6);
 #endif
@@ -98,14 +109,14 @@ void CYRF_SetTxRxMode(uint8_t mode)
 {
 	if(mode==TXRX_OFF)
 	{
-		if(protocol!=PROTO_WFLY)
+		if( protocol!=PROTO_WFLY && protocol!=PROTO_MLINK )
 			CYRF_WriteRegister(CYRF_0F_XACT_CFG, 0x24); // 4=IDLE, 8=TX, C=RX
 		CYRF_WriteRegister(CYRF_0E_GPIO_CTRL,0x00); // XOUT=0 PACTL=0
 	}
 	else
 	{
 		//Set the post tx/rx state
-		if(protocol!=PROTO_WFLY)
+		if( protocol!=PROTO_WFLY && protocol!=PROTO_MLINK )
 			CYRF_WriteRegister(CYRF_0F_XACT_CFG, mode == TX_EN ? 0x28 : 0x2C); // 4=IDLE, 8=TX, C=RX
 		if(mode == TX_EN)
 #ifdef ORANGE_TX_BLUE
@@ -168,10 +179,10 @@ void CYRF_SetPower(uint8_t val)
 /*
 *
 */
-void CYRF_ConfigCRCSeed(uint16_t crc)
+void CYRF_ConfigCRCSeed(uint16_t crc_seed)
 {
-	CYRF_WriteRegister(CYRF_15_CRC_SEED_LSB,crc & 0xff);
-	CYRF_WriteRegister(CYRF_16_CRC_SEED_MSB,crc >> 8);
+	CYRF_WriteRegister(CYRF_15_CRC_SEED_LSB,crc_seed & 0xff);
+	CYRF_WriteRegister(CYRF_16_CRC_SEED_MSB,crc_seed >> 8);
 }
 /*
 * these are the recommended sop codes from Cyrpress
@@ -258,7 +269,7 @@ void CYRF_FindBestChannels(uint8_t *channels, uint8_t len, uint8_t minspace, uin
 	delayMilliseconds(1);
 	for(i = 0; i < NUM_FREQ; i++)
 	{
-		CYRF_ConfigRFChannel(i);
+		CYRF_ConfigRFChannel(protocol==PROTO_LOSI?i|1:i);
 		delayMicroseconds(270);					//slow channel require 270usec for synthesizer to settle
         if( !(CYRF_ReadRegister(CYRF_05_RX_CTRL) & 0x80)) {
             CYRF_WriteRegister(CYRF_05_RX_CTRL, 0x80); //Prepare to receive
@@ -321,4 +332,69 @@ static void __attribute__((unused)) CYRF_PROGMEM_ConfigSOPCode(const uint8_t *da
 		code[i]=pgm_read_byte_near(&data[i]);
 	CYRF_ConfigSOPCode(code);
 }
+
+//CYRF GFSK 1Mb functions
+const uint8_t PROGMEM CYRF_GFSK1M_init_vals[][2] = {
+	{CYRF_02_TX_CTRL, 0x00},		// transmit err & complete interrupts disabled
+	{CYRF_05_RX_CTRL, 0x00},		// receive err & complete interrupts disabled
+	{CYRF_28_CLK_EN, 0x02},			// Force Receive Clock Enable, MUST be set
+	{CYRF_32_AUTO_CAL_TIME, 0x3c},	// must be set to 3C
+	{CYRF_35_AUTOCAL_OFFSET, 0x14},	// must be  set to 14
+	{CYRF_06_RX_CFG, 0x48},			// LNA manual control, Rx Fast Turn Mode Enable
+	{CYRF_1B_TX_OFFSET_LSB, 0x00},	// Tx frequency offset LSB
+	{CYRF_1C_TX_OFFSET_MSB, 0x00},	// Tx frequency offset MSB
+	{CYRF_0F_XACT_CFG, 0x24},		// Force End State, transaction end state = idle
+	{CYRF_03_TX_CFG, 0x00},			// GFSK mode
+	{CYRF_12_DATA64_THOLD, 0x0a},	// 64 Chip Data PN Code Correlator Threshold = 10
+	{CYRF_0F_XACT_CFG, 0x04},		// Transaction End State = idle
+	{CYRF_39_ANALOG_CTRL, 0x01},	// synth setting time for all channels is the same as for slow channels
+	{CYRF_0F_XACT_CFG, 0x24},		//Force IDLE
+	{CYRF_29_RX_ABORT, 0x00},		//Clear RX abort
+	{CYRF_12_DATA64_THOLD, 0x0a},	//set pn correlation threshold
+	{CYRF_10_FRAMING_CFG, 0x4a},	//set sop len and threshold
+	{CYRF_29_RX_ABORT, 0x0f},		//Clear RX abort?
+	{CYRF_03_TX_CFG, 0x00},			// GFSK mode
+	{CYRF_10_FRAMING_CFG, 0x4a},	// 0b11000000 //set sop len and threshold
+	{CYRF_1F_TX_OVERRIDE, 0x04},	//disable tx CRC
+	{CYRF_1E_RX_OVERRIDE, 0x14},	//disable rx crc
+	{CYRF_14_EOP_CTRL, 0x00},		//set EOP sync == 0
+};
+static void __attribute__((unused)) CYRF_GFSK1M_Init(uint8_t payload_length, uint8_t preamble_len)
+{
+	for(uint8_t i = 0; i < sizeof(CYRF_GFSK1M_init_vals) / 2; i++)	
+		CYRF_WriteRegister(pgm_read_byte_near(&CYRF_GFSK1M_init_vals[i][0]), pgm_read_byte_near(&CYRF_GFSK1M_init_vals[i][1]));
+
+
+	CYRF_WriteRegister(CYRF_01_TX_LENGTH, payload_length);
+	
+	CYRF_WritePreamble(0xAAAA00 | preamble_len);
+
+	CYRF_SetPower(0x00);
+	
+	CYRF_SetTxRxMode(TX_EN);
+}
+static void __attribute__((unused)) CYRF_GFSK1M_SendPayload(uint8_t *buffer, uint8_t len)
+{
+	uint8_t send=len>16 ? 16 : len;
+	CYRF_WriteRegister(CYRF_02_TX_CTRL, 0x40);
+	CYRF_WriteRegisterMulti(CYRF_20_TX_BUFFER, buffer, send);			// Fill the buffer with 16 bytes max
+	CYRF_WriteRegister(CYRF_02_TX_CTRL, 0x80);							// Start send
+	buffer += send;
+	len -= send;
+
+	while(len>8)
+	{
+		while((CYRF_ReadRegister(CYRF_04_TX_IRQ_STATUS)&0x10) == 0);	// Wait that half of the buffer is empty
+		CYRF_WriteRegisterMulti(CYRF_20_TX_BUFFER, buffer, 8);			// Add 8 bytes to the buffer
+		buffer+=8;
+		len-=8;
+	}
+
+	if(len)
+	{
+		while((CYRF_ReadRegister(CYRF_04_TX_IRQ_STATUS)&0x10) == 0);	// Wait that half of the buffer is empty
+		CYRF_WriteRegisterMulti(CYRF_20_TX_BUFFER, buffer, len);		// Add the remaining bytes to the buffer
+	}
+}
+#define CYRF_GFSK1M_SetPower() CYRF_SetPower(0x00)
 #endif

Multiprotocol/Convert.ino

@@ -32,9 +32,15 @@ uint16_t convert_channel_ppm(uint8_t num)
 }
 
 // Channel value 100% is converted to 10bit values 0<->1023
-uint16_t convert_channel_10b(uint8_t num)
+uint16_t convert_channel_10b(uint8_t num, bool failsafe)
 {
-	uint16_t val=Channel_data[num];
+	uint16_t val;
+	#ifdef FAILSAFE_ENABLE
+	if(failsafe)
+		val=Failsafe_data[num];				// 0<->2047
+	else
+	#endif
+		val=Channel_data[num];
 	val=((val<<2)+val)>>3;
 	if(val<=128) return 0;
 	if(val>=1152) return 1023;
@@ -91,9 +97,15 @@ int16_t convert_channel_16b_limit(uint8_t num,int16_t min,int16_t max)
 }
 
 // Channel value -125%<->125% is scaled to 16bit value with no limit
-int16_t convert_channel_16b_nolimit(uint8_t num, int16_t min, int16_t max)
+int16_t convert_channel_16b_nolimit(uint8_t num, int16_t min, int16_t max, bool failsafe)
 {
-	int32_t val=Channel_data[num];				// 0<->2047
+	int32_t val;
+	#ifdef FAILSAFE_ENABLE
+	if(failsafe)
+		val=Failsafe_data[num];				// 0<->2047
+	else
+	#endif
+		val=Channel_data[num];				// 0<->2047
 	val=(val-CHANNEL_MIN_100)*(max-min)/(CHANNEL_MAX_100-CHANNEL_MIN_100)+min;
 	return (uint16_t)val;
 }
@@ -151,14 +163,14 @@ static uint16_t  __attribute__((unused)) FrSkyX_scaleForPXX( uint8_t i, uint8_t
 }
 
 #ifdef FAILSAFE_ENABLE
-static uint16_t  __attribute__((unused)) FrSkyX_scaleForPXX_FS( uint8_t i )
+static uint16_t  __attribute__((unused)) FrSkyX_scaleForPXX_FS( uint8_t i, uint8_t num_chan=8)
 {	//mapped 1,2046(125%) range to 64,1984(PXX values);
 	uint16_t chan_val=((Failsafe_data[i]*15)>>4)+64;
 	if(Failsafe_data[i]==FAILSAFE_CHANNEL_NOPULSES)
 		chan_val=FAILSAFE_CHANNEL_NOPULSES;
 	else if(Failsafe_data[i]==FAILSAFE_CHANNEL_HOLD)
 		chan_val=FAILSAFE_CHANNEL_HOLD;
-	if(i>7) chan_val|=2048;   // upper channels offset
+	if(i>=num_chan) chan_val|=2048;   // upper channels offset
 	return chan_val;
 }
 #endif

Multiprotocol/Corona_cc2500.ino

@@ -61,7 +61,6 @@ static void __attribute__((unused)) CORONA_rf_init()
 		CC2500_WriteReg(CC2500_15_DEVIATN, 0x50);
 	}
 	
-	prev_option = option;
 	CC2500_WriteReg(CC2500_0C_FSCTRL0, option);
 
 	//not sure what they are doing to the PATABLE since basically only the first byte is used and it's only 8 bytes long. So I think they end up filling the PATABLE fully with 0xFF
@@ -72,7 +71,7 @@ static void __attribute__((unused)) CORONA_rf_init()
 }
 
 // Generate id and hopping freq
-static void __attribute__((unused)) CORONA_init()
+static void __attribute__((unused)) CORONA_TXID_init()
 {
 	#ifdef CORONA_FORCE_ID
 		// Example of ID and channels taken from dumps
@@ -256,17 +255,13 @@ static uint16_t __attribute__((unused)) CORONA_build_packet()
 	return packet_period;
 }
 
-uint16_t ReadCORONA()
+uint16_t CORONA_callback()
 {
 	#ifdef MULTI_SYNC
 		telemetry_set_input_sync(22000);
 	#endif
 	// Tune frequency if it has been changed
-	if ( prev_option != option )
-	{
-		CC2500_WriteReg(CC2500_0C_FSCTRL0, option);
-		prev_option = option ;
-	}
+	CC2500_SetFreqOffset();
 
 	if(IS_BIND_IN_PROGRESS)
 	{
@@ -281,7 +276,7 @@ uint16_t ReadCORONA()
 	return packet_period;
 }
 
-uint16_t initCORONA()
+void CORONA_init()
 {
 	switch(sub_protocol)
 	{
@@ -298,9 +293,8 @@ uint16_t initCORONA()
 	state=400;					// Used by V2 to send RF channels + ID for 2.65s at startup
 	hopping_frequency_no=0;
 	fdv3_id_send = 0;
-	CORONA_init();
+	CORONA_TXID_init();
 	CORONA_rf_init();
-	return 10000;
 }
 
 #endif

Multiprotocol/DM002_nrf24l01.ino

@@ -16,7 +16,7 @@
 
 #if defined(DM002_NRF24L01_INO)
 
-#include "iface_nrf24l01.h"
+#include "iface_xn297.h"
 
 #define DM002_PACKET_PERIOD		6100 // Timeout for callback in uSec
 #define DM002_INITIAL_WAIT		500
@@ -24,7 +24,6 @@
 #define DM002_RF_BIND_CHANNEL	0x27
 #define DM002_BIND_COUNT		655  // 4 seconds
 
-
 enum DM002_FLAGS {
     // flags going to packet[9]
     DM002_FLAG_FLIP		= 0x01, 
@@ -37,10 +36,10 @@ enum DM002_FLAGS {
     DM002_FLAG_CAMERA2	= 0x80,
 };
 
-static void __attribute__((unused)) DM002_send_packet(uint8_t bind)
+static void __attribute__((unused)) DM002_send_packet()
 {
 	memcpy(packet+5,(uint8_t *)"\x00\x7F\x7F\x7F\x00\x00\x00",7);
-	if(bind)
+	if(IS_BIND_IN_PROGRESS)
 	{
 		packet[0] = 0xAA;
 		packet[1] = rx_tx_addr[0]; 
@@ -75,63 +74,40 @@ static void __attribute__((unused)) DM002_send_packet(uint8_t bind)
 		packet_count&=0x0F;
 		packet[10] = packet_count;
 		packet_count++;
+		XN297_Hopping(hopping_frequency_no);
 	}
 	//CRC
 	for(uint8_t i=0;i<DM002_PACKET_SIZE-1;i++)
 		packet[11]+=packet[i];
 	
-	// Power on, TX mode, 2byte CRC
-	// Why CRC0? xn297 does not interpret it - either 16-bit CRC or nothing
-	XN297_Configure(_BV(NRF24L01_00_EN_CRC) | _BV(NRF24L01_00_CRCO) | _BV(NRF24L01_00_PWR_UP));
-	if (bind)
-		NRF24L01_WriteReg(NRF24L01_05_RF_CH, DM002_RF_BIND_CHANNEL);
-	else
-		NRF24L01_WriteReg(NRF24L01_05_RF_CH, hopping_frequency[hopping_frequency_no]);
-	// clear packet status bits and TX FIFO
-	NRF24L01_WriteReg(NRF24L01_07_STATUS, 0x70);
-	NRF24L01_FlushTx();
+	//Send
+	XN297_SetPower();
+	XN297_SetTxRxMode(TX_EN);
 	XN297_WritePayload(packet, DM002_PACKET_SIZE);
-
-	NRF24L01_SetPower();	// Set tx_power
 }
 
-static void __attribute__((unused)) DM002_init()
+static void __attribute__((unused)) DM002_RF_init()
 {
-    NRF24L01_Initialize();
-    NRF24L01_SetTxRxMode(TX_EN);
+	XN297_Configure(XN297_CRCEN, XN297_SCRAMBLED, XN297_1M);
 	XN297_SetTXAddr((uint8_t *)"\x26\xA8\x67\x35\xCC", 5);
-
-    NRF24L01_FlushTx();
-    NRF24L01_FlushRx();
-    NRF24L01_WriteReg(NRF24L01_07_STATUS, 0x70);     // Clear data ready, data sent, and retransmit
-    NRF24L01_WriteReg(NRF24L01_01_EN_AA, 0x00);      // No Auto Acknowldgement on all data pipes
-    NRF24L01_WriteReg(NRF24L01_02_EN_RXADDR, 0x01);  // Enable data pipe 0 only
-    NRF24L01_SetBitrate(NRF24L01_BR_1M);             // 1Mbps
-    NRF24L01_SetPower();
+	XN297_RFChannel(DM002_RF_BIND_CHANNEL);
 }
 
 uint16_t DM002_callback()
 {
-	if(IS_BIND_DONE)
-	{
-		#ifdef MULTI_SYNC
-			telemetry_set_input_sync(DM002_PACKET_PERIOD);
-		#endif
-		DM002_send_packet(0);
-	}
-	else
+	#ifdef MULTI_SYNC
+		telemetry_set_input_sync(DM002_PACKET_PERIOD);
+	#endif
+	if (bind_counter)
 	{
+		bind_counter--;
 		if (bind_counter == 0)
 		{
 			BIND_DONE;
 			XN297_SetTXAddr(rx_tx_addr, 5);
 		}
-		else
-		{
-			DM002_send_packet(1);
-			bind_counter--;
-		}
 	}
+	DM002_send_packet();
 	return	DM002_PACKET_PERIOD;
 }
 
@@ -155,13 +131,12 @@ static void __attribute__((unused)) DM002_initialize_txid()
 	}
 }
 
-uint16_t initDM002(void)
+void DM002_init(void)
 {
 	BIND_IN_PROGRESS;	// autobind protocol
     bind_counter = DM002_BIND_COUNT;
 	DM002_initialize_txid();
-	DM002_init();
-	return	DM002_INITIAL_WAIT;
+	DM002_RF_init();
 }
 
 #endif

Multiprotocol/DSM.ino

@@ -117,7 +117,9 @@ static void __attribute__((unused)) DSM_cyrf_configdata()
 
 static uint8_t __attribute__((unused)) DSM_get_pn_row(uint8_t channel, bool dsmx)
 {
-	return (dsmx ? (channel - 2) % 5 : channel % 5);	
+	if(protocol == PROTO_DSM && sub_protocol == DSMR)
+		return (channel + 2) % 5;
+	return (dsmx ? (channel - 2) % 5 : channel % 5);
 }
 
 static void __attribute__((unused)) DSM_set_sop_data_crc(bool ch2, bool dsmx)
@@ -127,10 +129,14 @@ static void __attribute__((unused)) DSM_set_sop_data_crc(bool ch2, bool dsmx)
 	if(ch2)
 		CYRF_ConfigCRCSeed(seed);	//CH2
 	else
-		CYRF_ConfigCRCSeed(~seed);	//CH1
+		CYRF_ConfigCRCSeed(~seed);	//CH1, DSMR only use CH1
 
 	uint8_t pn_row = DSM_get_pn_row(hopping_frequency[hopping_frequency_no], dsmx);
 	uint8_t code[16];
+	#if 0
+		debug_time();
+		debug(" crc:%04X,row:%d,col:%d,rf:%02X",(~seed)&0xffff,pn_row,sop_col,hopping_frequency[hopping_frequency_no]);
+	#endif
 	DSM_read_code(code,pn_row,sop_col,8);					// pn_row between 0 and 4, sop_col between 1 and 7
 	CYRF_ConfigSOPCode(code);
 	DSM_read_code(code,pn_row,7 - sop_col,8);				// 7-sop_col between 0 and 6

Multiprotocol/DSM_Rx_cyrf6936.ino

@@ -4,7 +4,7 @@
  the Free Software Foundation, either version 3 of the License, or
  (at your option) any later version.
 
-Multiprotocol is distributed in the hope that it will be useful,
+ Multiprotocol is distributed in the hope that it will be useful,
  but WITHOUT ANY WARRANTY; without even the implied warranty of
  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  GNU General Public License for more details.
@@ -31,7 +31,7 @@ enum {
 	DSM_RX_DATA_CH2,
 };
 
-static void __attribute__((unused)) DSM_Rx_init()
+static void __attribute__((unused)) DSM_RX_RF_init()
 {
 	DSM_cyrf_config();
 	rx_disable_lna = IS_POWER_FLAG_on;
@@ -63,7 +63,7 @@ uint16_t convert_channel_DSM_nolimit(int32_t val)
 	return (uint16_t)val;
 }
 
-static uint8_t __attribute__((unused)) DSM_Rx_check_packet()
+static uint8_t __attribute__((unused)) DSM_RX_check_packet()
 {
  	uint8_t rx_status=CYRF_ReadRegister(CYRF_07_RX_IRQ_STATUS);
 	if((rx_status & 0x03) == 0x02)  									// RXC=1, RXE=0 then 2nd check is required (debouncing)
@@ -99,7 +99,7 @@ static uint8_t __attribute__((unused)) DSM_Rx_check_packet()
 	return rx_status;												// Return error code
 }
 
-static void __attribute__((unused)) DSM_Rx_build_telemetry_packet()
+static void __attribute__((unused)) DSM_RX_build_telemetry_packet()
 {
 	uint8_t nbr_bits = 11;
 	if((DSM_rx_type&0xF0) == 0x00)
@@ -155,9 +155,13 @@ static void __attribute__((unused)) DSM_Rx_build_telemetry_packet()
 		packet_in[idx++] = bits & 0xff;
 	// Send telemetry
 	telemetry_link = 1;
+	#ifdef SEND_CPPM
+		if(sub_protocol>0)
+			telemetry_link |= 0x80;	// Disable telemetry output
+	#endif
 }
 
-static bool __attribute__((unused)) DSM_Rx_bind_check_validity()
+static bool __attribute__((unused)) DSM_RX_bind_check_validity()
 {
 	uint16_t sum = 384 - 0x10;//
 	for(uint8_t i = 0; i < 8; i++)
@@ -173,7 +177,7 @@ static bool __attribute__((unused)) DSM_Rx_bind_check_validity()
 	return true;
 }
 
-static void __attribute__((unused)) DSM_Rx_build_bind_packet()
+static void __attribute__((unused)) DSM_RX_build_bind_packet()
 {
 	uint16_t sum = 384 - 0x10;//
 	packet[0] = 0xff ^ cyrfmfg_id[0];								// ID
@@ -205,12 +209,10 @@ static void __attribute__((unused)) DSM_abort_channel_rx(uint8_t ch)
 	CYRF_WriteRegister(CYRF_05_RX_CTRL, 0x83);						// Prepare to receive
 }
 
-uint16_t DSM_Rx_callback()
+uint16_t DSM_RX_callback()
 {
 	uint8_t rx_status;
 	static uint8_t read_retry=0;
-	static uint16_t pps_counter;
-	static uint32_t pps_timer = 0;
 
 	switch (phase)
 	{
@@ -234,7 +236,7 @@ uint16_t DSM_Rx_callback()
 				if(len==16)
 				{
 					CYRF_ReadDataPacketLen(packet_in, 16);
-					if(DSM_Rx_bind_check_validity())
+					if(DSM_RX_bind_check_validity())
 					{
 						// store tx info into eeprom
 						uint16_t temp = DSM_RX_EEPROM_OFFSET;
@@ -259,6 +261,7 @@ uint16_t DSM_Rx_callback()
 							&0x80 => false=DSM2, true=DSMX
 							&0xF0 => false=1024, true=2048 */
 						DSM_rx_type=packet_in[12];
+						debugln(", num_ch=%d, type=%02X",num_ch, DSM_rx_type);
 						switch(DSM_rx_type)
 						{
 							case 0x01:
@@ -276,12 +279,11 @@ uint16_t DSM_Rx_callback()
 								break;
 						}
 						eeprom_write_byte((EE_ADDR)temp, DSM_rx_type);
-						debugln(", num_ch=%d, type=%02X",num_ch, DSM_rx_type);
 						CYRF_WriteRegister(CYRF_29_RX_ABORT, 0x20);	// Abort RX operation
 						CYRF_SetTxRxMode(TX_EN);					// Force end state TX
 						CYRF_ConfigDataCode((const uint8_t *)"\x98\x88\x1B\xE4\x30\x79\x03\x84", 16);
 						CYRF_WriteRegister(CYRF_29_RX_ABORT, 0x00);	// Clear abort RX
-						DSM_Rx_build_bind_packet();
+						DSM_RX_build_bind_packet();
 						bind_counter=500;
 						phase++;									// DSM_RX_BIND2;
 						return 1000;
@@ -303,11 +305,11 @@ uint16_t DSM_Rx_callback()
 				if(read_retry==0)
 				{
 					packet_count=0;
-					hopping_frequency_no++;								// Change channel
+					hopping_frequency_no++;							// Change channel
 					hopping_frequency_no %= 0x50;
-					hopping_frequency_no |= 0x01;						// Odd channels only
+					hopping_frequency_no |= 0x01;					// Odd channels only
 					CYRF_ConfigRFChannel(hopping_frequency_no);
-					DSM_abort_channel_rx(0);							// Abort RX operation and receive
+					DSM_abort_channel_rx(0);						// Abort RX operation and receive
 				}
 			}
 			return 1000;
@@ -348,7 +350,7 @@ uint16_t DSM_Rx_callback()
 			break;
 		case DSM2_RX_SCAN:											// Scan for DSM2 frequencies
 			//Received something ?
-			rx_status = DSM_Rx_check_packet();
+			rx_status = DSM_RX_check_packet();
 			if(rx_status == 0x02)
 			{ // data received with no errors
 				debugln("CH%d:Found %d",rf_ch_num+1,hopping_frequency[rf_ch_num]);
@@ -403,13 +405,13 @@ uint16_t DSM_Rx_callback()
 				pps_counter = 0;
 			}
 			//Received something ?
-			rx_status = DSM_Rx_check_packet();
+			rx_status = DSM_RX_check_packet();
 			if(rx_status == 0x02)
 			{ // data received with no errors
 				#ifdef DSM_DEBUG_RF
 					debugln("CH1:RX");
 				#endif
-				DSM_Rx_build_telemetry_packet();
+				DSM_RX_build_telemetry_packet();
 				rx_data_started = true;
 				pps_counter++;
 				DSM_abort_channel_rx(2);							// Abort RX operation, set sop&data&seed&rf using CH2, DSM2/X and receive
@@ -454,13 +456,13 @@ uint16_t DSM_Rx_callback()
 			}
 			return 500;
 		case DSM_RX_DATA_CH2:
-			rx_status = DSM_Rx_check_packet();
+			rx_status = DSM_RX_check_packet();
 			if(rx_status == 0x02)
 			{ // data received with no errors
 				#ifdef DSM_DEBUG_RF
 					debugln("CH2:RX");
 				#endif
-				DSM_Rx_build_telemetry_packet();
+				DSM_RX_build_telemetry_packet();
 				pps_counter++;
 			}
 			#ifdef DSM_DEBUG_RF
@@ -478,9 +480,9 @@ uint16_t DSM_Rx_callback()
 	return 10000;
 }
 
-uint16_t initDSM_Rx()
+void DSM_RX_init()
 {
-	DSM_Rx_init();
+	DSM_RX_RF_init();
 	hopping_frequency_no = 0;
 	
 	if (IS_BIND_IN_PROGRESS)
@@ -501,7 +503,6 @@ uint16_t initDSM_Rx()
 		debugln(", type=%02X", DSM_rx_type);
 		phase = DSM_RX_DATA_PREP;
 	}
-	return 15000;
 }
 
 #endif

Multiprotocol/DSM_cyrf6936.ino

@@ -17,6 +17,8 @@
 
 #include "iface_cyrf6936.h"
 
+//#define DSM_DEBUG_FWD_PGM
+
 //#define DSM_GR300
 
 #define DSM_BIND_CHANNEL 0x0d //13 This can be any odd channel
@@ -84,21 +86,24 @@ static void __attribute__((unused)) DSM_build_bind_packet()
 	if(sub_protocol==DSM_AUTO)
 		packet[11] = 12;
 	else
-		packet[11] = num_ch;
+		packet[11] = num_ch;				// DX5 DSMR sends 0x48...
 
-	if (sub_protocol==DSM2_22)
-		packet[12]=num_ch<8?0x01:0x02;		// DSM2/1024 1 or 2 packets depending on the number of channels
-	else if(sub_protocol==DSM2_11)
-		packet[12]=0x12;					// DSM2/2048 2 packets
-	else if(sub_protocol==DSMX_22)
+	if (sub_protocol==DSMR)
+		packet[12] = 0xa2;
+	else if (sub_protocol==DSM2_1F)
+		packet[12] = num_ch<8?0x01:0x02;	// DSM2/1024 1 or 2 packets depending on the number of channels
+	else if(sub_protocol==DSM2_2F)
+		packet[12] = 0x12;					// DSM2/2048 2 packets
+	else if(sub_protocol==DSMX_1F)
 		#if defined DSM_TELEMETRY
 			packet[12] = 0xb2;				// DSMX/2048 2 packets
 		#else
 			packet[12] = num_ch<8? 0xa2 : 0xb2;	// DSMX/2048 1 or 2 packets depending on the number of channels
 		#endif
-	else									// DSMX_11 && DSM_AUTO
-		packet[12]=0xb2;					// DSMX/2048 2 packets
+	else									// DSMX_2F && DSM_AUTO
+		packet[12] = 0xb2;					// DSMX/2048 2 packets
 	
+
 	packet[13] = 0x00;						//???
 	for(i = 8; i < 14; i++)
 		sum += packet[i];
@@ -124,6 +129,9 @@ static void __attribute__((unused)) DSM_update_channels()
 	if(num_ch<3 || num_ch>12)
 		num_ch=6;						// Default to 6 channels if invalid choice...
 
+	if(sub_protocol==DSMR && num_ch>7)
+		num_ch=7;						// Max 7 channels in DSMR
+
 	// Create channel map based on number of channels and refresh rate
 	uint8_t idx=num_ch-3;
 	if((option & 0x40) && num_ch>7 && num_ch<12)
@@ -139,18 +147,32 @@ static void __attribute__((unused)) DSM_build_data_packet(uint8_t upper)
 	if(prev_option!=option)
 		DSM_update_channels();
 
-	if (sub_protocol==DSMX_11 || sub_protocol==DSMX_22 )
+	if (sub_protocol==DSMX_2F || sub_protocol==DSMX_1F)
 	{//DSMX
 		packet[0] = cyrfmfg_id[2];
 		packet[1] = cyrfmfg_id[3];
 	}
 	else
-	{//DSM2
+	{//DSM2 && DSMR
 		packet[0] = (0xff ^ cyrfmfg_id[2]);
 		packet[1] = (0xff ^ cyrfmfg_id[3]);
-		if(sub_protocol==DSM2_22)
-			bits=10;								// Only DSM2_22 is using a resolution of 1024
+		if(sub_protocol==DSM2_1F)
+			bits=10;								// Only DSM2_1F is using a resolution of 1024
 	}
+
+	if(sub_protocol == DSMR)
+	{
+		for (uint8_t i = 0; i < 7; i++)
+		{
+			uint16_t value = 0x0000;
+			if(i < num_ch)
+				value=Channel_data[i]<<1;
+			packet[i*2+2] = (value >> 8) & 0xff;
+			packet[i*2+3] = (value >> 0) & 0xff;
+		}
+		return;
+	}
+
 	#ifdef DSM_THROTTLE_KILL_CH
 		uint16_t kill_ch=Channel_data[DSM_THROTTLE_KILL_CH-1];
 	#endif
@@ -176,19 +198,36 @@ static void __attribute__((unused)) DSM_build_data_packet(uint8_t upper)
 				else
 			#endif
 				#ifdef DSM_MAX_THROW
-					value=Channel_data[CH_TAER[idx]];									// -100%..+100% => 1024..1976us and -125%..+125% => 904..2096us based on Redcon 6 channel DSM2 RX
+					value=Channel_data[CH_TAER[idx]];										// -100%..+100% => 1024..1976us and -125%..+125% => 904..2096us based on Redcon 6 channel DSM2 RX
 				#else
 					if(option & 0x80)
-						value=Channel_data[CH_TAER[idx]];								// -100%..+100% => 1024..1976us and -125%..+125% => 904..2096us based on Redcon 6 channel DSM2 RX
+						value=Channel_data[CH_TAER[idx]];									// -100%..+100% => 1024..1976us and -125%..+125% => 904..2096us based on Redcon 6 channel DSM2 RX
 					else
-						value=convert_channel_16b_nolimit(CH_TAER[idx],0x156,0x6AA);	// -100%..+100% => 1100..1900us and -125%..+125% => 1000..2000us based on a DX8 G2 dump
+						value=convert_channel_16b_nolimit(CH_TAER[idx],0x156,0x6AA,false);	// -100%..+100% => 1100..1900us and -125%..+125% => 1000..2000us based on a DX8 G2 dump
 				#endif
 			if(bits==10) value>>=1;
 			value |= (upper && i==0 ? 0x8000 : 0) | (idx << bits);
 		}	  
-		packet[i*2+2] = (value >> 8) & 0xff;
-		packet[i*2+3] = (value >> 0) & 0xff;
+		packet[i*2+2] = value >> 8;
+		packet[i*2+3] = value;
 	}
+	#ifdef DSM_FWD_PGM
+		if(upper==0 && DSM_SerialRX && (DSM_SerialRX_val[0]&0xF8)==0x70 )
+		{ // Send forward programming data if available
+			for(uint8_t i=0; i<(DSM_SerialRX_val[0]&0x07);i++)
+			{
+				packet[i*2+4]=0x70+i;
+				packet[i*2+5]=DSM_SerialRX_val[i+1];
+			}
+			DSM_SerialRX=false;
+			#ifdef DSM_DEBUG_FWD_PGM
+				debug("FWD=");
+				for(uint8_t i=4; i<16;i++)
+					debug(" %02X",packet[i]);
+				debugln("");
+			#endif
+		}
+	#endif
 }
 
 static uint8_t __attribute__((unused)) DSM_Check_RX_packet()
@@ -208,7 +247,7 @@ static uint8_t __attribute__((unused)) DSM_Check_RX_packet()
 	return result;
 }
 
-uint16_t ReadDsm()
+uint16_t DSM_callback()
 {
 	#define DSM_CH1_CH2_DELAY	4010			// Time between write of channel 1 and channel 2
 	#ifdef STM32_BOARD
@@ -299,25 +338,32 @@ uint16_t ReadDsm()
 			DSM_cyrf_configdata();
 			CYRF_SetTxRxMode(TX_EN);
 			hopping_frequency_no = 0;
-			phase = DSM_CH1_WRITE_A;						// in fact phase++
-			DSM_set_sop_data_crc(phase==DSM_CH1_CHECK_A||phase==DSM_CH1_CHECK_B, sub_protocol==DSMX_11||sub_protocol==DSMX_22);
+			phase = DSM_CH1_WRITE_A;							// in fact phase++
+			if(sub_protocol == DSMR)
+				DSM_set_sop_data_crc(false, true);
+			else
+				DSM_set_sop_data_crc(true, sub_protocol==DSMX_2F||sub_protocol==DSMX_1F);	//prep CH1
 			return 10000;
 		case DSM_CH1_WRITE_A:
 			#ifdef MULTI_SYNC
-				telemetry_set_input_sync(11000);			// Always request 11ms spacing even if we don't use half of it in 22ms mode
+				telemetry_set_input_sync(11000);				// Always request 11ms spacing even if we don't use half of it in 22ms mode
 			#endif
+			if(sub_protocol == DSMR)
+				CYRF_SetPower(0x08);							//Keep transmit power in sync
+			else
+				CYRF_SetPower(0x28);							//Keep transmit power in sync
 		case DSM_CH1_WRITE_B:
+			DSM_build_data_packet(phase == DSM_CH1_WRITE_B);	// build lower or upper channels
 		case DSM_CH2_WRITE_A:
 		case DSM_CH2_WRITE_B:
-			DSM_build_data_packet(phase == DSM_CH1_WRITE_B||phase == DSM_CH2_WRITE_B);	// build lower or upper channels
-			CYRF_ReadRegister(CYRF_04_TX_IRQ_STATUS);		// clear IRQ flags
+			CYRF_ReadRegister(CYRF_04_TX_IRQ_STATUS);			// clear IRQ flags
 			CYRF_WriteDataPacket(packet);
 			#if 0
 				for(uint8_t i=0;i<16;i++)
 					debug(" %02X", packet[i]);
 				debugln("");
 			#endif
-			phase++;										// change from WRITE to CHECK mode
+			phase++;											// change from WRITE to CHECK mode
 			return DSM_WRITE_DELAY;
 		case DSM_CH1_CHECK_A:
 		case DSM_CH1_CHECK_B:
@@ -328,7 +374,7 @@ uint16_t ReadDsm()
 				if((CYRF_ReadRegister(CYRF_02_TX_CTRL) & 0x80) == 0x00)
 					break;
 			
-			if(phase==DSM_CH1_CHECK_A || phase==DSM_CH1_CHECK_B)
+			if((phase==DSM_CH1_CHECK_A || phase==DSM_CH1_CHECK_B) && sub_protocol!=DSMR)
 			{
 				#if defined DSM_TELEMETRY
 					// reset cyrf6936 if freezed after switching from TX to RX
@@ -340,16 +386,19 @@ uint16_t ReadDsm()
 						CYRF_SetTxRxMode(TX_EN);
 					}
 				#endif
-				DSM_set_sop_data_crc(phase==DSM_CH1_CHECK_A||phase==DSM_CH1_CHECK_B, sub_protocol==DSMX_11 || sub_protocol==DSMX_22);
-				phase++;										// change from CH1_CHECK to CH2_WRITE
+				DSM_set_sop_data_crc(true, sub_protocol==DSMX_2F||sub_protocol==DSMX_1F);	// prep CH2
+				phase++;									// change from CH1_CHECK to CH2_WRITE
 				return DSM_CH1_CH2_DELAY - DSM_WRITE_DELAY;
 			}
-			if (phase == DSM_CH2_CHECK_A)
-				CYRF_SetPower(0x28);						//Keep transmit power in sync
 #if defined DSM_TELEMETRY
 			phase++;										// change from CH2_CHECK to CH2_READ
 			CYRF_SetTxRxMode(RX_EN);						//Receive mode
 			CYRF_WriteRegister(CYRF_05_RX_CTRL, 0x87);		//0x80??? //Prepare to receive
+			if(sub_protocol==DSMR)
+			{
+				phase = DSM_CH2_READ_B;
+				return 11000 - DSM_WRITE_DELAY - DSM_READ_DELAY;
+			}
 			#ifdef DSM_GR300
 				if(num_ch==3)
 					return timing - DSM_CH1_CH2_DELAY - DSM_WRITE_DELAY - DSM_READ_DELAY;
@@ -368,11 +417,20 @@ uint16_t ReadDsm()
 				if(len>TELEMETRY_BUFFER_SIZE-2)
 					len=TELEMETRY_BUFFER_SIZE-2;
 				CYRF_ReadDataPacketLen(packet_in+1, len);
+				#ifdef DSM_DEBUG_FWD_PGM
+					//debug(" %02X", packet_in[1]);
+					if(packet_in[1]==9)
+					{
+						for(uint8_t i=0;i<len;i++)
+							debug(" %02X", packet_in[i+1]);
+						debugln("");
+					}
+				#endif
 				packet_in[0]=CYRF_ReadRegister(CYRF_13_RSSI)&0x1F;// store RSSI of the received telemetry signal
 				telemetry_link=1;
 			}
 			CYRF_WriteRegister(CYRF_29_RX_ABORT, 0x20);		// Abort RX operation
-			if (phase == DSM_CH2_READ_A && (sub_protocol==DSM2_22 || sub_protocol==DSMX_22) && num_ch < 8)	// 22ms mode
+			if (phase == DSM_CH2_READ_A && (sub_protocol==DSM2_1F || sub_protocol==DSMX_1F) && num_ch < 8)	// 22ms mode
 			{
 				CYRF_SetTxRxMode(RX_EN);					// Force end state read
 				CYRF_WriteRegister(CYRF_29_RX_ABORT, 0x00);	// Clear abort RX operation
@@ -390,14 +448,14 @@ uint16_t ReadDsm()
 				phase = DSM_CH1_WRITE_A;					//Transmit lower
 			CYRF_SetTxRxMode(TX_EN);						//TX mode
 			CYRF_WriteRegister(CYRF_29_RX_ABORT, 0x00);		//Clear abort RX operation
-			DSM_set_sop_data_crc(phase==DSM_CH1_CHECK_A||phase==DSM_CH1_CHECK_B, sub_protocol==DSMX_11||sub_protocol==DSMX_22);
+			DSM_set_sop_data_crc(false, sub_protocol==DSMX_2F||sub_protocol==DSMX_1F||sub_protocol==DSMR);
 			return DSM_READ_DELAY;
 #else
 			// No telemetry
-			DSM_set_sop_data_crc(phase==DSM_CH1_CHECK_A||phase==DSM_CH1_CHECK_B, sub_protocol==DSMX_11||sub_protocol==DSMX_22);
+			DSM_set_sop_data_crc(phase==DSM_CH1_CHECK_A||phase==DSM_CH1_CHECK_B, sub_protocol==DSMX_2F||sub_protocol==DSMX_1F);
 			if (phase == DSM_CH2_CHECK_A)
 			{
-				if(num_ch > 7 || sub_protocol==DSM2_11 || sub_protocol==DSMX_11)
+				if(num_ch > 7 || sub_protocol==DSM2_2F || sub_protocol==DSMX_2F)
 					phase = DSM_CH1_WRITE_B;				//11ms mode or upper to transmit change from CH2_CHECK_A to CH1_WRITE_A
 				else										
 				{											//Normal mode 22ms
@@ -421,25 +479,65 @@ uint16_t ReadDsm()
 	return 0;		
 }
 
-uint16_t initDsm()
+
+const uint8_t PROGMEM DSMR_ID_FREQ[][4 + 23] = {
+	{ 0x71, 0x74, 0x1c, 0xe4, 0x11, 0x2f, 0x17, 0x3d, 0x23, 0x3b, 0x0f, 0x21, 0x25, 0x49, 0x1d, 0x13, 0x4d, 0x1f, 0x41, 0x4b, 0x47, 0x05, 0x27, 0x15, 0x19, 0x3f, 0x07 },
+	{ 0xfe, 0xfe, 0xfe, 0xfe, 0x45, 0x31, 0x33, 0x4b, 0x11, 0x29, 0x49, 0x3f, 0x09, 0x13, 0x47, 0x21, 0x1d, 0x43, 0x1f, 0x05, 0x41, 0x19, 0x1b, 0x2d, 0x15, 0x4d, 0x0f },
+	{ 0xfe, 0xff, 0xff, 0xff, 0x2a, 0x06, 0x22, 0x28, 0x16, 0x24, 0x38, 0x0e, 0x32, 0x2e, 0x14, 0x3a, 0x04, 0x44, 0x0c, 0x42, 0x1c, 0x4a, 0x10, 0x36, 0x3c, 0x48, 0x26 },
+	{ 0xff, 0xfe, 0xff, 0xff, 0x28, 0x34, 0x48, 0x46, 0x3a, 0x12, 0x18, 0x32, 0x14, 0x42, 0x16, 0x40, 0x22, 0x44, 0x1c, 0x0a, 0x36, 0x20, 0x10, 0x0c, 0x3c, 0x26, 0x2e },
+	{ 0xff, 0xff, 0xfe, 0xff, 0x3c, 0x16, 0x04, 0x48, 0x1e, 0x4a, 0x10, 0x18, 0x22, 0x28, 0x38, 0x40, 0x20, 0x06, 0x3e, 0x42, 0x30, 0x1a, 0x2c, 0x1c, 0x46, 0x14, 0x34 },
+	{ 0xff, 0xff, 0xff, 0xfe, 0x4d, 0x39, 0x1b, 0x13, 0x45, 0x2f, 0x0d, 0x3d, 0x0b, 0x11, 0x47, 0x2d, 0x19, 0x1d, 0x23, 0x35, 0x33, 0x3b, 0x21, 0x31, 0x17, 0x0f, 0x43 },
+	{ 0xff, 0xff, 0xff, 0xff, 0x14, 0x28, 0x2e, 0x32, 0x3e, 0x10, 0x38, 0x0e, 0x12, 0x06, 0x2c, 0x26, 0x30, 0x4c, 0x34, 0x16, 0x04, 0x3a, 0x42, 0x48, 0x36, 0x46, 0x1a },
+	{ 0x00, 0xff, 0xff, 0xff, 0x3e, 0x30, 0x42, 0x24, 0x06, 0x0e, 0x14, 0x1c, 0x08, 0x10, 0x20, 0x22, 0x04, 0x32, 0x0c, 0x44, 0x3c, 0x46, 0x4a, 0x26, 0x4c, 0x48, 0x1e },
+	{ 0xff, 0x00, 0xff, 0xff, 0x38, 0x0e, 0x22, 0x2a, 0x44, 0x3a, 0x4a, 0x3e, 0x16, 0x20, 0x36, 0x24, 0x46, 0x18, 0x1e, 0x12, 0x1c, 0x30, 0x2c, 0x14, 0x06, 0x0c, 0x40 },
+	{ 0x00, 0x00, 0xff, 0xff, 0x06, 0x4c, 0x26, 0x08, 0x46, 0x3e, 0x30, 0x12, 0x38, 0x1c, 0x04, 0x4a, 0x2c, 0x1a, 0x20, 0x3a, 0x18, 0x36, 0x28, 0x2e, 0x22, 0x40, 0x10 },
+	{ 0xff, 0xff, 0x00, 0xff, 0x12, 0x06, 0x3c, 0x2a, 0x22, 0x38, 0x48, 0x4c, 0x32, 0x44, 0x26, 0x16, 0x0c, 0x28, 0x2c, 0x36, 0x1c, 0x1a, 0x42, 0x10, 0x08, 0x4a, 0x34 },
+	{ 0x00, 0xff, 0x00, 0xff, 0x04, 0x4c, 0x4a, 0x28, 0x2a, 0x24, 0x14, 0x1e, 0x40, 0x48, 0x44, 0x2c, 0x2e, 0x1a, 0x12, 0x46, 0x3a, 0x0e, 0x18, 0x1c, 0x20, 0x10, 0x42 },
+	{ 0xff, 0x00, 0x00, 0xff, 0x06, 0x10, 0x14, 0x16, 0x48, 0x18, 0x44, 0x2c, 0x0a, 0x26, 0x24, 0x42, 0x36, 0x30, 0x38, 0x3e, 0x0c, 0x3c, 0x34, 0x46, 0x2a, 0x32, 0x0e },
+	{ 0x00, 0x00, 0x00, 0xff, 0x2c, 0x0a, 0x46, 0x28, 0x38, 0x24, 0x14, 0x06, 0x04, 0x10, 0x18, 0x30, 0x12, 0x20, 0x3a, 0x1a, 0x32, 0x3c, 0x3e, 0x4a, 0x1e, 0x44, 0x36 },
+	{ 0x00, 0x00, 0x00, 0x00, 0x45, 0x23, 0x07, 0x37, 0x4b, 0x13, 0x3d, 0x31, 0x19, 0x2b, 0x2f, 0x2d, 0x1f, 0x4d, 0x3f, 0x1b, 0x43, 0x27, 0x3b, 0x11, 0x05, 0x0d, 0x17 },
+	{ 0xff, 0xff, 0xff, 0x00, 0x0b, 0x4b, 0x1d, 0x39, 0x09, 0x0f, 0x49, 0x25, 0x07, 0x35, 0x3b, 0x05, 0x33, 0x17, 0x2d, 0x11, 0x2b, 0x29, 0x1f, 0x45, 0x1b, 0x41, 0x47 },
+	{ 0x00, 0xff, 0xff, 0x00, 0x41, 0x35, 0x11, 0x25, 0x29, 0x27, 0x33, 0x47, 0x4d, 0x31, 0x05, 0x37, 0x15, 0x1f, 0x23, 0x07, 0x1b, 0x0f, 0x3b, 0x49, 0x19, 0x3f, 0x0b },
+	{ 0xff, 0x00, 0xff, 0x00, 0x25, 0x47, 0x05, 0x0b, 0x45, 0x1f, 0x2b, 0x27, 0x2d, 0x09, 0x07, 0x43, 0x49, 0x29, 0x4d, 0x39, 0x33, 0x41, 0x17, 0x0f, 0x15, 0x19, 0x3b },
+	{ 0x00, 0x00, 0xff, 0x00, 0x3b, 0x05, 0x21, 0x0d, 0x1b, 0x43, 0x17, 0x2d, 0x1d, 0x25, 0x4b, 0x35, 0x4d, 0x3f, 0x07, 0x09, 0x37, 0x41, 0x15, 0x1f, 0x0f, 0x27, 0x29 },
+	{ 0xff, 0xff, 0x00, 0x00, 0x2b, 0x35, 0x1b, 0x1d, 0x0f, 0x47, 0x09, 0x0d, 0x45, 0x41, 0x21, 0x11, 0x2f, 0x43, 0x27, 0x33, 0x4b, 0x37, 0x13, 0x19, 0x4d, 0x23, 0x17 },
+	{ 0x00, 0xff, 0x00, 0x00, 0x1b, 0x1d, 0x33, 0x13, 0x2b, 0x27, 0x09, 0x41, 0x25, 0x17, 0x19, 0x2d, 0x4b, 0x37, 0x45, 0x11, 0x21, 0x0d, 0x3d, 0x4d, 0x07, 0x39, 0x43 },
+	{ 0xff, 0x00, 0x00, 0x00, 0x37, 0x27, 0x43, 0x4b, 0x39, 0x13, 0x07, 0x0d, 0x25, 0x17, 0x29, 0x1b, 0x1d, 0x45, 0x19, 0x2d, 0x0b, 0x3d, 0x15, 0x47, 0x1f, 0x21, 0x4d } };
+
+void DSM_init()
 { 
-	CYRF_GetMfgData(cyrfmfg_id);
-	//Model match
-	cyrfmfg_id[3]^=RX_num;
+	if(sub_protocol == DSMR)
+	{
+		uint8_t row = rx_tx_addr[3]%22;
+		for(uint8_t i=0; i< 4; i++)
+			cyrfmfg_id[i] = pgm_read_byte_near(&DSMR_ID_FREQ[row][i]);
+		for(uint8_t i=0; i< 23; i++)
+			hopping_frequency[i] = pgm_read_byte_near(&DSMR_ID_FREQ[row][i+4]);
+	}
+	else
+	{
+		CYRF_GetMfgData(cyrfmfg_id);
+		//Model match
+		cyrfmfg_id[3]^=RX_num;
+	}
+
 	//Calc sop_col
 	sop_col = (cyrfmfg_id[0] + cyrfmfg_id[1] + cyrfmfg_id[2] + 2) & 0x07;
+
 	//Fix for OrangeRX using wrong DSM_pncodes by preventing access to "Col 8"
-	if(sop_col==0)
+	if(sop_col==0 && sub_protocol != DSMR)
 	{
 	   cyrfmfg_id[rx_tx_addr[0]%3]^=0x01;					//Change a bit so sop_col will be different from 0
 	   sop_col = (cyrfmfg_id[0] + cyrfmfg_id[1] + cyrfmfg_id[2] + 2) & 0x07;
 	}
+
 	//Calc CRC seed
 	seed = (cyrfmfg_id[0] << 8) + cyrfmfg_id[1];
+
 	//Hopping frequencies
-	if (sub_protocol == DSMX_11 || sub_protocol == DSMX_22)
+	if (sub_protocol == DSMX_2F || sub_protocol == DSMX_1F)
 		DSM_calc_dsmx_channel();
-	else
+	else if(sub_protocol != DSMR)
 	{ 
 		uint8_t tmpch[10];
 		CYRF_FindBestChannels(tmpch, 10, 5, 3, 75);
@@ -454,6 +552,7 @@ uint16_t initDsm()
 		}
 		hopping_frequency[1] = tmpch[idx];
 	}
+
 	//
 	DSM_cyrf_config();
 	CYRF_SetTxRxMode(TX_EN);
@@ -468,7 +567,6 @@ uint16_t initDsm()
 	}
 	else
 		phase = DSM_CHANSEL;//
-	return 10000;
 }
 
 #endif

Multiprotocol/Devo_cyrf6936.ino

@@ -146,7 +146,7 @@ static void __attribute__((unused)) DEVO_build_data_pkt()
 	uint8_t sign = 0x0b;
 	for (uint8_t i = 0; i < 4; i++)
 	{
-		int16_t value=convert_channel_16b_nolimit(CH_EATR[ch_idx * 4 + i],-1600,1600);//range -1600..+1600
+		int16_t value=convert_channel_16b_nolimit(CH_EATR[ch_idx * 4 + i],-1600,1600,false);//range -1600..+1600
 		if(value < 0)
 		{
 			value = -value;
@@ -163,29 +163,148 @@ static void __attribute__((unused)) DEVO_build_data_pkt()
 }
 
 #if defined DEVO_HUB_TELEMETRY
-static void __attribute__((unused)) DEVO_parse_telemetry_packet()
+static uint32_t __attribute__((unused)) DEVO_text_to_int(uint8_t *ptr, uint8_t len)
 {
+	uint32_t value = 0;
+	for(uint8_t i = 0; i < len; i++)
+		value = value * 10 + (ptr[i] - '0');
+	return value;
+}
+
+static void __attribute__((unused)) DEVO_float_to_ints(uint8_t *ptr, uint16_t *value, uint16_t *decimal)
+{
+	bool seen_decimal = false;
+	*value = 0;
+	*decimal = 0;
+	for(uint8_t i = 0; i < 7; i++)
+	{
+		if(ptr[i] == '.')
+		{
+			seen_decimal = true;
+			continue;
+		}
+		if(ptr[i] < '0' || ptr[i] > '9')
+		{
+			if(*value != 0 || seen_decimal)
+				return;
+		}
+		else
+		{
+			if(seen_decimal)
+				*decimal = *decimal * 10 + (ptr[i] - '0');
+			else
+				*value = *value * 10 + (ptr[i] - '0');
+		}
+	}
+}
+
+static void __attribute__((unused)) DEVO_parse_telemetry_packet()
+{ // Telemetry packets every 2.4ms
 	DEVO_scramble_pkt(); //This will unscramble the packet
 	
 	debugln("RX");
 	if ((((uint32_t)packet[15] << 16) | ((uint32_t)packet[14] << 8) | packet[13]) != (MProtocol_id & 0x00ffffff))
 		return;	// ID does not match
-	
-	//RSSI
-	TX_RSSI = CYRF_ReadRegister(CYRF_13_RSSI) & 0x1F;
-	TX_RSSI = (TX_RSSI << 1) + TX_RSSI;
-	RX_RSSI = TX_RSSI;
-	telemetry_link = 1;
-
-	//TODO: FW telemetry https://github.com/DeviationTX/deviation/blob/5efb6a28bea697af9a61b5a0ed2528cc8d203f90/src/protocol/devo_cyrf6936.c#L232
-
-	debug("P[0]=%02X",packet[0]);
-	
-	if (packet[0] == 0x30)	// Volt packet
+		
+	if((telemetry_link & 3) != 0)
 	{
-		v_lipo1 = packet[1] << 1;
-		v_lipo2 = packet[3] << 1;
+		debugln("S%d",telemetry_link);
+		return;	// Previous telemetry not sent yet...
 	}
+
+	//Debug telem RX
+	//for(uint8_t i=0;i<12;i++)
+	//	debug("%02X ",packet[i]);
+	//debugln("");
+	
+	#if defined HUB_TELEMETRY
+	//Telemetry https://github.com/DeviationTX/deviation/blob/5efb6a28bea697af9a61b5a0ed2528cc8d203f90/src/protocol/devo_cyrf6936.c#L232
+		uint16_t val, dec;
+		switch(packet[0])
+		{
+			case 0x30:	// Volt and RPM packet
+				//RSSI and voltage
+				TX_RSSI = CYRF_ReadRegister(CYRF_13_RSSI) & 0x1F;
+				TX_RSSI = (TX_RSSI << 1) + TX_RSSI;
+				RX_RSSI = TX_RSSI;
+				telemetry_link |= 1;
+				v_lipo1 = packet[1] << 1;
+				v_lipo2 = packet[3] << 1;
+				//packet[5] = 127;																					// 12.7V
+				if(packet[5] != 0)
+				{
+					val  = (packet[5]*11)/21;																		// OpenTX strange transformation??
+					dec  = val;
+					val /= 10;
+					dec -= val*10;
+					frsky_send_user_frame(0x3A, val, 0x00);															// volt3
+					frsky_send_user_frame(0x3B, dec, 0x00);															// volt3
+				}
+				val = packet[7] * 120;																				// change to RPM
+				frsky_send_user_frame(0x03, val, val>>8);															// RPM
+				break;
+			case 0x31:	// Temperature packet
+				//memcpy(&packet[1],"\x29\x2A\x2B\x00\x00\x00\x00\x00\x00\x00\x00\x00",12);							// 21°, 22°, 23°
+				for(uint8_t i=0; i<2;i++)
+					if(packet[i+1]!=0xff)
+					{
+						val = packet[i+1];
+						val -= 20;
+						frsky_send_user_frame(0x02 + i*3, val, val>>8);												// temp 1 & 2
+					}
+				break;
+			// GPS Data
+			case 0x32: // Longitude
+				//memcpy(&packet[1],"\x30\x33\x30\x32\x30\x2e\x38\x32\x37\x30\x45\xfb",12);							// 030°20.8270E
+				val = DEVO_text_to_int(&packet[1], 3)*100 + DEVO_text_to_int(&packet[4], 2);						// dddmm
+				frsky_send_user_frame(0x12  , val, val>>8);
+				val = DEVO_text_to_int(&packet[7], 4);																// .mmmm
+				frsky_send_user_frame(0x12+8, val, val>>8);
+				frsky_send_user_frame(0x1A+8, packet[11], 0x00);													// 'E'/'W'
+				break;
+			case 0x33: // Latitude
+				//memcpy(&packet[1],"\x35\x39\x35\x34\x2e\x37\x37\x37\x36\x4e\x07\x00",12);							// 59°54.776N
+				val = DEVO_text_to_int(&packet[1], 2)*100 + DEVO_text_to_int(&packet[3], 2);						// ddmm
+				frsky_send_user_frame(0x13  , val, val>>8);
+				val = DEVO_text_to_int(&packet[6], 4);																// .mmmm
+				frsky_send_user_frame(0x13+8, val, val>>8);
+				frsky_send_user_frame(0x1B+8, packet[10], 0x00);													// 'N'/'S'
+				break;
+			case 0x34: // Altitude
+				//memcpy(&packet[1],"\x31\x32\x2e\x38\x00\x00\x00\x4d\x4d\x4e\x45\xfb",12);							// 12.8 MMNE
+				DEVO_float_to_ints(&packet[1], &val, &dec);
+				frsky_send_user_frame(0x10, val, val>>8);
+				frsky_send_user_frame(0x21, dec, dec>>8);
+				break;
+			case 0x35: // Speed
+				//memcpy(&packet[1],"\x00\x00\x00\x00\x00\x00\x30\x2e\x30\x30\x00\x00",12);							// 0.0
+				DEVO_float_to_ints(&packet[1], &val, &dec);
+				frsky_send_user_frame(0x11  , val, val>>8);
+				frsky_send_user_frame(0x11+8, dec, dec>>8);
+				break;
+			case 0x36: // Time
+				//memcpy(&packet[1],"\x31\x38\x32\x35\x35\x32\x31\x35\x31\x30\x31\x32",12);							// "182552151012" = 2012-10-15 18:25:52 (UTC)
+				if(packet[1]!=0)
+				{
+					frsky_send_user_frame(0x15, DEVO_text_to_int(&packet[9], 2), DEVO_text_to_int(&packet[7], 2));	// month, day
+					val = 2000 + DEVO_text_to_int(&packet[11], 2);													// year
+					frsky_send_user_frame(0x16, val, val>>8);
+					frsky_send_user_frame(0x17, DEVO_text_to_int(&packet[1], 2), DEVO_text_to_int(&packet[3], 2));	// hour, min
+					frsky_send_user_frame(0x18, DEVO_text_to_int(&packet[5], 2), 0x00);								// second
+				}
+				break;
+		}
+	#else
+		if(packet[0] == 0x30)
+		{
+			TX_RSSI = CYRF_ReadRegister(CYRF_13_RSSI) & 0x1F;
+			TX_RSSI = (TX_RSSI << 1) + TX_RSSI;
+			RX_RSSI = TX_RSSI;
+			telemetry_link |= 1;
+			v_lipo1 = packet[1] << 1;
+			v_lipo2 = packet[3] << 1;
+		}
+	#endif
 }
 #endif
 
@@ -294,7 +413,7 @@ static void __attribute__((unused)) DEVO_BuildPacket()
 		packet_count = 0;
 }
 
-uint16_t devo_callback()
+uint16_t DEVO_callback()
 {
 	static uint8_t txState=0;
 	
@@ -404,8 +523,23 @@ uint16_t devo_callback()
 #endif
 }
 
-uint16_t DevoInit()
+void DEVO_init()
 {	
+	#ifdef ENABLE_PPM
+		if(mode_select) //PPM mode
+		{
+			if(IS_BIND_BUTTON_FLAG_on)
+			{
+				eeprom_write_byte((EE_ADDR)(MODELMODE_EEPROM_OFFSET+RX_num),0x00);	// reset to autobind mode for the current model
+				option=0;
+			}
+			else
+			{	
+				option=eeprom_read_byte((EE_ADDR)(MODELMODE_EEPROM_OFFSET+RX_num));	// load previous mode: autobind or fixed id
+				if(option!=1) option=0;								// if not fixed id mode then it should be autobind
+			}
+		}
+	#endif //ENABLE_PPM
 	switch(sub_protocol)
 	{
 		case 1:
@@ -453,7 +587,6 @@ uint16_t DevoInit()
 		bind_counter = 0;
 		DEVO_cyrf_set_bound_sop_code();
 	}  
-	return 2400;
 }
 
 #endif

Multiprotocol/E010R5_cyrf6936.ino

@@ -0,0 +1,151 @@
+/*
+ This project is free software: you can redistribute it and/or modify
+ it under the terms of the GNU General Public License as published by
+ the Free Software Foundation, either version 3 of the License, or
+ (at your option) any later version.
+
+ Multiprotocol is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ GNU General Public License for more details.
+
+ You should have received a copy of the GNU General Public License
+ along with Multiprotocol.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#if defined(E010R5_CYRF6936_INO)
+
+#include "iface_rf2500.h"
+
+#define E010R5_FORCE_ID
+
+#define E010R5_PAYLOAD_SIZE	14
+
+
+static void __attribute__((unused)) E010R5_build_data_packet()
+{
+	packet[ 0] = 0x0D;								// Packet length
+	packet[ 1] = convert_channel_8b(THROTTLE);
+	packet[ 2] = convert_channel_s8b(RUDDER);
+	packet[ 3] = convert_channel_s8b(ELEVATOR);
+	packet[ 4] = convert_channel_s8b(AILERON);
+	packet[ 5] = 0x20;								// Trim Rudder
+	packet[ 6] = 0x20;								// Trim Elevator
+	packet[ 7] = 0x20;								// Trim Aileron
+	packet[ 8] = 0x01								// Flags: high=0x01, low=0x00
+			| GET_FLAG(CH5_SW, 0x04)				//        flip=0x04
+			| GET_FLAG(CH6_SW, 0x08)				//        led=0x08
+			| GET_FLAG(CH8_SW, 0x10)				//		  headless=0x10
+			| GET_FLAG(CH9_SW, 0x20);				//		  one key return=0x20
+	packet[ 9] = IS_BIND_IN_PROGRESS ? 0x80 : 0x00	// Flags: bind=0x80
+			| GET_FLAG(CH7_SW, 0x20)				//        calib=0x20
+			| GET_FLAG(CH10_SW, 0x01);				//		  strange effect=0x01=long press on right button
+	packet[10] = rx_tx_addr[0];
+	packet[11] = rx_tx_addr[1];
+	packet[12] = rx_tx_addr[2];
+	packet[13] = 0x9D;								// Check
+	for(uint8_t i=0;i<13;i++)
+		packet[13] += packet[i];
+
+	RF2500_BuildPayload(packet);
+}
+
+uint16_t E010R5_callback()
+{
+	//Bind
+	if(bind_counter)
+		if(--bind_counter==0)
+			BIND_DONE;
+
+	//Send packet
+	RF2500_SendPayload();
+	
+	//Timing and hopping
+	packet_count++;
+	switch(packet_count)
+	{
+		case 1:
+		case 2:
+		case 4:
+		case 5:
+			return 1183;
+		default:
+			hopping_frequency_no++;
+			hopping_frequency_no &= 3;
+			if(IS_BIND_IN_PROGRESS)
+				rf_ch_num = 0x30 + (hopping_frequency_no<<3);
+			else
+				rf_ch_num = hopping_frequency[hopping_frequency_no];
+			RF2500_RFChannel(rf_ch_num);
+			RF2500_SetPower();
+			packet_count = 0;
+		case 3:
+			E010R5_build_data_packet();
+			return 3400;
+	}
+	return 0;
+}
+
+void E010R5_init()
+{
+	BIND_IN_PROGRESS;									// Autobind protocol
+	bind_counter = 2600;
+
+	//RF2500 emu init
+	RF2500_Init(E010R5_PAYLOAD_SIZE, false);			// 14 bytes, not scrambled
+	RF2500_SetTXAddr((uint8_t*)"\x0E\x54\x96\xEE");		// Same address for bind and normal packets
+	
+	rx_tx_addr[0]=0x00;
+	hopping_frequency[0]=0x35;	//53
+	#ifdef E010R5_FORCE_ID
+		switch(rx_tx_addr[3]%5)
+		{
+			case 0:
+				//TX1
+				//hopping_frequency[0]=0x35;	//53
+				hopping_frequency[1]=0x30;		//48
+				rx_tx_addr[1]=0x45;
+				rx_tx_addr[2]=0x46;
+				break;
+			case 1:
+				//TX2
+				//hopping_frequency[0]=0x35;	//53
+				hopping_frequency[1]=0x3C;		//60
+				rx_tx_addr[1]=0x1B;
+				rx_tx_addr[2]=0x9E;
+				break;
+			case 2:
+				//TX4
+				hopping_frequency[0]=0x30;		//48
+				hopping_frequency[1]=0x38;		//56
+				rx_tx_addr[1]=0x2E;
+				rx_tx_addr[2]=0xAE;
+				break;
+			case 3:
+				//TX5
+				//hopping_frequency[0]=0x35;	//53
+				hopping_frequency[1]=0x41;		//65
+				rx_tx_addr[0]=0x0D;
+				rx_tx_addr[1]=0xB9;
+				rx_tx_addr[2]=0xFC;
+				break;
+			default:
+				//TX3
+				hopping_frequency[0]=0x30;		//48
+				hopping_frequency[1]=0x38;		//56
+				rx_tx_addr[1]=0x17;
+				rx_tx_addr[2]=0x0D;
+				break;
+		}
+    #endif
+	// This is the same as the E010 v1...
+	hopping_frequency[2]=hopping_frequency[0]+0x10;
+	hopping_frequency[3]=hopping_frequency[1]+0x10;
+
+	E010R5_build_data_packet();
+	RF2500_RFChannel(hopping_frequency[0]);
+	hopping_frequency_no=0;
+	packet_count=0;
+}
+
+#endif

Multiprotocol/E016HV2_cc2500.ino

@@ -0,0 +1,157 @@
+/*
+ This project is free software: you can redistribute it and/or modify
+ it under the terms of the GNU General Public License as published by
+ the Free Software Foundation, either version 3 of the License, or
+ (at your option) any later version.
+
+Multiprotocol is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ GNU General Public License for more details.
+
+ You should have received a copy of the GNU General Public License
+ along with Multiprotocol.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#if defined(E016HV2_CC2500_INO)
+
+#include "iface_cc2500.h"
+
+//#define FORCE_E016HV2_ORIGINAL_ID
+
+#define E016HV2_INITIAL_WAIT		500
+#define E016HV2_PACKET_PERIOD		10000
+#define E016HV2_RF_BIND_CHANNEL	5
+#define E016HV2_PAYLOAD_SIZE		11
+#define E016HV2_BIND_COUNT		300	//3sec
+
+static void __attribute__((unused)) E016HV2_send_packet()
+{
+	//payload length (after this byte)
+	packet[0 ] = 0x0A;
+	
+	//bind indicator
+	if(IS_BIND_IN_PROGRESS)
+	{
+		packet[1 ] = 0x02;
+		if(bind_counter)
+			bind_counter--;
+		else
+		{
+			BIND_DONE;
+			CC2500_250K_RFChannel(rf_ch_num);			// Set main channel
+		}
+	}
+	else
+		packet[1 ] = 0x20;
+	
+	//ID
+	packet[2 ] = rx_tx_addr[2];
+	packet[3 ] = rx_tx_addr[3];
+
+	//channels TREA
+	uint8_t channel;
+	if(IS_BIND_IN_PROGRESS)
+		channel=0x64;								// Throttle must be centered during bind
+	else
+		channel=convert_channel_8b_limit_deadband(THROTTLE,0x00,0x64,0xC8, 20);
+	packet[4 ]  = channel;
+	channel=convert_channel_16b_limit(RUDDER,0x00,0xC8);
+	packet[5 ]  = channel;
+	channel=convert_channel_16b_limit(ELEVATOR,0x00,0xC8);
+	packet[6 ]  = channel;
+	channel=convert_channel_16b_limit(AILERON,0x00,0xC8);
+	packet[7 ]  = channel;
+
+	//flags
+	if(CH8_SW && !phase) //toggle calib flag
+		flags ^= 0x40;
+	phase=CH8_SW;
+
+	packet[8 ] = GET_FLAG(CH7_SW,  0x01)			// 0x01=Flip
+			   | GET_FLAG(CH9_SW,  0x02)			// 0x02=Headless
+			   | GET_FLAG(CH10_SW, 0x04)			// 0x04=One Key Return
+			   | flags;								// 0x40=Calib
+
+	packet[9 ] = 0x02;								// Speed control 0x00:low, 0x01:medium, 0x02:high
+	
+	packet[10] = GET_FLAG(CH5_SW, 0x01)				// 0x01=TakeOff/Land  (momentary switch)
+			   | GET_FLAG(CH6_SW, 0x04);			// 0x04=Emergeny Stop (momentary switch)
+
+	CC2500_SetPower();								// Set tx_power
+	CC2500_SetFreqOffset();							// Set frequency offset
+
+	//Build real packet and send it
+	static uint8_t pid=0;
+	crc=0;
+	
+	// stop TX/RX
+	CC2500_Strobe(CC2500_SIDLE);
+	// flush tx FIFO
+	CC2500_Strobe(CC2500_SFTX);
+	// packet length
+	CC2500_WriteReg(CC2500_3F_TXFIFO, 6 + 4 + 1 + 11 + 2);	// preamble + address + packet_control + payload + crc
+
+	// preamble+address
+	CC2500_WriteRegisterMulti(CC2500_3F_TXFIFO, (uint8_t*)"\xAA\xAA\xAA\xAA\xAA\xAA\xE7\xE7\xE7\xE7", 10);
+
+	// packet control
+	CC2500_WriteReg(CC2500_3F_TXFIFO, 0x50+(pid<<2));
+	pid++;
+
+	// payload
+	//debug("P:")
+	for (uint8_t i = 0; i < E016HV2_PAYLOAD_SIZE; ++i)
+	{
+		uint8_t byte = (bit_reverse(packet[i])<<1) | (packet[i+1]&0x01);
+		//debug(" %02X",byte)
+		CC2500_WriteReg(CC2500_3F_TXFIFO,byte);
+		crc16_update(byte, 8);
+	}
+
+	// crc
+	CC2500_WriteReg(CC2500_3F_TXFIFO,crc >> 8);
+	CC2500_WriteReg(CC2500_3F_TXFIFO,crc);
+	//debugln(" %04X",crc)
+
+	// transmit
+	CC2500_Strobe(CC2500_STX);
+}
+
+uint16_t E016HV2_callback()
+{
+	E016HV2_send_packet();
+	return E016HV2_PACKET_PERIOD;
+}
+
+void E016HV2_init()
+{
+	//Config CC2500
+	CC2500_250K_Init();
+	CC2500_250K_RFChannel(E016HV2_RF_BIND_CHANNEL);		// Set bind channel
+
+	#ifdef FORCE_E016HV2_ORIGINAL_ID
+		rx_tx_addr[2]=0x27;
+		rx_tx_addr[3]=0x1B;
+		//rf_ch_num = 44;
+	#endif
+	//General ID
+	//3F1B -> 68,2C1B -> 49,2B1B -> 48,2A1B -> 47,291B -> 46,281B -> 45,271B -> 44,261B -> 43,251B -> 42
+	//241B -> no bind,231B -> no bind,221B -> 71,211B -> 70,201B -> 69,1F1B -> 68,1E1B -> 67,1D1B -> 66,1C1B -> 65,1B1B -> 64,1A1B -> 63,191B -> 62,181B -> 61,171B -> 60,161B -> 59
+	//0C1B -> 49,051B -> 42,041B -> no bind,031B -> no bind,021B -> 71,011B -> 70,001B -> no bind
+	if(rx_tx_addr[2]<3) rx_tx_addr[2]+=3;			// rx_tx_addr[2]=0 is invalid
+	if(rx_tx_addr[3]==0) rx_tx_addr[3]+=64;			// rx_tx_addr[3]=0 is invalid
+	rf_ch_num = (rx_tx_addr[2] + rx_tx_addr[3]) % 32 + 42;
+	if(rf_ch_num>71)								// channels 72 and 73 are invalid
+	{
+		rx_tx_addr[2]-=2;
+		rf_ch_num-=2;
+	}
+	
+	phase=CH8_SW;
+	flags=0;
+	bind_counter = E016HV2_BIND_COUNT;
+	BIND_IN_PROGRESS;								// Autobind protocol
+}
+
+#endif

Multiprotocol/E016H_nrf24l01.ino

@@ -0,0 +1,154 @@
+/*
+ This project is free software: you can redistribute it and/or modify
+ it under the terms of the GNU General Public License as published by
+ the Free Software Foundation, either version 3 of the License, or
+ (at your option) any later version.
+
+ Multiprotocol is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ GNU General Public License for more details.
+
+ You should have received a copy of the GNU General Public License
+ along with Multiprotocol.  If not, see <http://www.gnu.org/licenses/>.
+ */
+// compatible with E016H
+
+#if defined(E016H_NRF24L01_INO)
+
+#include "iface_xn297.h"
+
+//Protocols constants
+#define E016H_BIND_COUNT		500
+#define E016H_ADDRESS_LENGTH	5
+
+#define E016H_PACKET_PERIOD		4080
+#define E016H_PACKET_SIZE		10
+#define E016H_BIND_CHANNEL		80
+#define E016H_NUM_CHANNELS		4
+
+//Channels
+#define E016H_STOP_SW			CH5_SW
+#define E016H_FLIP_SW			CH6_SW
+#define E016H_HEADLESS_SW		CH8_SW
+#define E016H_RTH_SW			CH9_SW
+
+// E016H flags packet[1]
+#define E016H_FLAG_CALIBRATE	0x80
+#define E016H_FLAG_STOP			0x20
+#define E016H_FLAG_FLIP			0x04
+// E016H flags packet[3]
+#define E016H_FLAG_HEADLESS		0x10
+#define E016H_FLAG_RTH			0x04
+// E016H flags packet[7]
+#define E016H_FLAG_TAKEOFF		0x80
+#define E016H_FLAG_HIGHRATE		0x08
+
+static void __attribute__((unused)) E016H_send_packet()
+{
+    uint8_t can_flip = 0, calibrate = 1;
+
+	if(IS_BIND_IN_PROGRESS)
+	{
+		memcpy(packet, &rx_tx_addr[1], 4);
+		memcpy(&packet[4], hopping_frequency, 4);
+		packet[8] = 0x23;
+	}
+	else
+	{
+		// trim commands
+		packet[0] = 0;
+		// aileron
+		uint16_t val = convert_channel_16b_limit(AILERON, 0, 0x3ff);
+		can_flip |= (val < 0x100) || (val > 0x300);
+		packet[1] = val >> 8;
+		packet[2] = val & 0xff;
+		if(val < 0x300) calibrate = 0;
+		// elevator
+		val = convert_channel_16b_limit(ELEVATOR, 0x3ff, 0);
+		can_flip |= (val < 0x100) || (val > 0x300);
+		packet[3] = val >> 8;
+		packet[4] = val & 0xff;
+		if(val < 0x300) calibrate = 0;
+		// throttle
+		val = convert_channel_16b_limit(THROTTLE, 0, 0x3ff);
+		packet[5] = val >> 8;
+		packet[6] = val & 0xff;
+		if(val > 0x100) calibrate = 0;
+		// rudder
+		val = convert_channel_16b_limit(RUDDER, 0, 0x3ff);
+		packet[7] = val >> 8;
+		packet[8] = val & 0xff;
+		if(val > 0x100) calibrate = 0;
+		// flags
+		packet[1] |= GET_FLAG(E016H_STOP_SW, E016H_FLAG_STOP)
+				  |  (can_flip ? GET_FLAG(E016H_FLIP_SW, E016H_FLAG_FLIP) : 0)
+				  |  (calibrate ? E016H_FLAG_CALIBRATE : 0);
+		packet[3] |= GET_FLAG(E016H_HEADLESS_SW, E016H_FLAG_HEADLESS)
+				  |  GET_FLAG(E016H_RTH_SW, E016H_FLAG_RTH);
+		packet[7] |= E016H_FLAG_HIGHRATE;
+		// frequency hopping
+		XN297_Hopping(hopping_frequency_no++ & 0x03);
+	}
+	// checksum
+	packet[9] = packet[0];
+	for (uint8_t i=1; i < E016H_PACKET_SIZE-1; i++)
+		packet[9] += packet[i];
+
+	// Send
+	XN297_SetPower();
+	XN297_SetTxRxMode(TX_EN);
+	XN297_WritePayload(packet, E016H_PACKET_SIZE);
+}
+
+static void __attribute__((unused)) E016H_RF_init()
+{
+	XN297_Configure(XN297_CRCEN, XN297_SCRAMBLED, XN297_1M);
+	XN297_SetTXAddr((uint8_t *)"\x5a\x53\x46\x30\x31", 5);  // bind address
+	//XN297_HoppingCalib(E016H_NUM_CHANNELS);
+	XN297_RFChannel(E016H_BIND_CHANNEL);
+}
+
+uint16_t E016H_callback()
+{
+	#ifdef MULTI_SYNC
+		telemetry_set_input_sync(packet_period);
+	#endif
+	if(bind_counter)
+	{
+		bind_counter--;
+		if (bind_counter == 0)
+		{
+			XN297_SetTXAddr(rx_tx_addr, E016H_ADDRESS_LENGTH);
+			BIND_DONE;
+		}
+	}
+	E016H_send_packet();
+	return E016H_PACKET_PERIOD;
+}
+
+static void __attribute__((unused)) E016H_initialize_txid()
+{
+	// tx id
+    rx_tx_addr[0] = 0xa5;
+    rx_tx_addr[1] = 0x00;
+
+    // rf channels
+    uint32_t lfsr=random(0xfefefefe);
+    for(uint8_t i=0; i<E016H_NUM_CHANNELS; i++)
+    {
+		hopping_frequency[i] = (lfsr & 0xFF) % 80; 
+		lfsr>>=8;
+	}
+}
+
+void E016H_init()
+{
+	BIND_IN_PROGRESS;
+	E016H_initialize_txid();
+	E016H_RF_init();
+	bind_counter = E016H_BIND_COUNT;
+	hopping_frequency_no = 0;
+}
+
+#endif

Multiprotocol/E01X_nrf24l01.ino

@@ -33,11 +33,6 @@
 #define E015_PACKET_SIZE		10
 #define E015_BIND_PACKET_SIZE	9
 
-#define E016H_PACKET_PERIOD 4080
-#define E016H_PACKET_SIZE     10
-#define E016H_BIND_CHANNEL    80
-#define E016H_NUM_CHANNELS    4
-
 //Channels
 #define E01X_ARM_SW			CH5_SW
 #define E016H_STOP_SW		CH5_SW
@@ -64,17 +59,6 @@
 #define E015_FLAG_EXPERT	0x02
 #define E015_FLAG_INTERMEDIATE 0x01
 
-// E016H flags packet[1]
-#define E016H_FLAG_CALIBRATE	0x80
-#define E016H_FLAG_STOP		0x20
-#define E016H_FLAG_FLIP		0x04
-// E016H flags packet[3]
-#define E016H_FLAG_HEADLESS	0x10
-#define E016H_FLAG_RTH		0x04
-// E016H flags packet[7]
-#define E016H_FLAG_TAKEOFF	0x80
-#define E016H_FLAG_HIGHRATE	0x08
-
 static void __attribute__((unused)) E015_check_arming()
 {
 	uint8_t arm_channel = E01X_ARM_SW;
@@ -95,14 +79,13 @@ static void __attribute__((unused)) E015_check_arming()
 	}
 }
 
-static void __attribute__((unused)) E01X_send_packet(uint8_t bind)
+static void __attribute__((unused)) E01X_send_packet()
 {
-    uint8_t can_flip = 0, calibrate = 1;
 	if(sub_protocol==E012)
 	{
 		packet_length=E012_PACKET_SIZE;
 		packet[0] = rx_tx_addr[1];
-		if(bind)
+		if(IS_BIND_IN_PROGRESS)
 		{
 			packet[1] = 0xaa;
 			memcpy(&packet[2], hopping_frequency, E012_NUM_RF_CHANNELS);
@@ -132,9 +115,9 @@ static void __attribute__((unused)) E01X_send_packet(uint8_t bind)
 		packet[13] = 0x56; 
 		packet[14] = rx_tx_addr[2];
 	}
-	else if(sub_protocol==E015)
+	else
 	{ // E015
-		if(bind)
+		if(IS_BIND_IN_PROGRESS)
 		{
 			packet[0] = 0x18;
 			packet[1] = 0x04;
@@ -170,72 +153,14 @@ static void __attribute__((unused)) E01X_send_packet(uint8_t bind)
 			packet_length=E015_PACKET_SIZE;
 		}
 	}
-	else
-	{ // E016H
-		packet_length=E016H_PACKET_SIZE;
-		if(bind)
-		{
-			rf_ch_num=E016H_BIND_CHANNEL;
-			memcpy(packet, &rx_tx_addr[1], 4);
-			memcpy(&packet[4], hopping_frequency, 4);
-			packet[8] = 0x23;
-		}
-		else
-		{
-			// trim commands
-			packet[0] = 0;
-			// aileron
-			uint16_t val = convert_channel_16b_limit(AILERON, 0, 0x3ff);
-			can_flip |= (val < 0x100) || (val > 0x300);
-			packet[1] = val >> 8;
-			packet[2] = val & 0xff;
-			if(val < 0x300) calibrate = 0;
-			// elevator
-			val = convert_channel_16b_limit(ELEVATOR, 0x3ff, 0);
-			can_flip |= (val < 0x100) || (val > 0x300);
-			packet[3] = val >> 8;
-			packet[4] = val & 0xff;
-			if(val < 0x300) calibrate = 0;
-			// throttle
-			val = convert_channel_16b_limit(THROTTLE, 0, 0x3ff);
-			packet[5] = val >> 8;
-			packet[6] = val & 0xff;
-			if(val > 0x100) calibrate = 0;
-			// rudder
-			val = convert_channel_16b_limit(RUDDER, 0, 0x3ff);
-			packet[7] = val >> 8;
-			packet[8] = val & 0xff;
-			if(val > 0x100) calibrate = 0;
-			// flags
-			packet[1] |= GET_FLAG(E016H_STOP_SW, E016H_FLAG_STOP)
-					  |  (can_flip ? GET_FLAG(E01X_FLIP_SW, E016H_FLAG_FLIP) : 0)
-					  |  (calibrate ? E016H_FLAG_CALIBRATE : 0);
-			packet[3] |= GET_FLAG(E01X_HEADLESS_SW, E016H_FLAG_HEADLESS)
-					  |  GET_FLAG(E01X_RTH_SW, E016H_FLAG_RTH);
-			packet[7] |= E016H_FLAG_HIGHRATE;
-			// frequency hopping
-			rf_ch_num=hopping_frequency[hopping_frequency_no++ & 0x03];
-		}
-		// checksum
-		packet[9] = packet[0];
-		for (uint8_t i=1; i < E016H_PACKET_SIZE-1; i++)
-			packet[9] += packet[i];
-	}
 
-	// Power on, TX mode, CRC enabled
-	if(sub_protocol==E016H)
-		XN297_Configure( _BV(NRF24L01_00_EN_CRC) | _BV(NRF24L01_00_CRCO) | _BV(NRF24L01_00_PWR_UP));
-	else //E012 & E015
-		HS6200_Configure(_BV(NRF24L01_00_EN_CRC) | _BV(NRF24L01_00_CRCO) | _BV(NRF24L01_00_PWR_UP));
+	HS6200_Configure(_BV(NRF24L01_00_EN_CRC) | _BV(NRF24L01_00_CRCO) | _BV(NRF24L01_00_PWR_UP));
 	NRF24L01_WriteReg(NRF24L01_05_RF_CH, rf_ch_num);
 
 	NRF24L01_WriteReg(NRF24L01_07_STATUS, 0x70);
 	NRF24L01_FlushTx();
 
-	if(sub_protocol==E016H)
-		XN297_WritePayload(packet, packet_length);
-	else
-		HS6200_WritePayload(packet, packet_length);
+	HS6200_WritePayload(packet, packet_length);
 
 	// Check and adjust transmission power. We do this after
 	// transmission to not bother with timeout after power
@@ -244,55 +169,31 @@ static void __attribute__((unused)) E01X_send_packet(uint8_t bind)
 	NRF24L01_SetPower();
 }
 
-static void __attribute__((unused)) E01X_init()
+static void __attribute__((unused)) E01X_RF_init()
 {
 	NRF24L01_Initialize();
-	NRF24L01_SetTxRxMode(TX_EN);
+
 	if(sub_protocol==E012)
 		HS6200_SetTXAddr((uint8_t *)"\x55\x42\x9C\x8F\xC9", E01X_ADDRESS_LENGTH);
-	else if(sub_protocol==E015)
+	else //E015
 		HS6200_SetTXAddr((uint8_t *)"\x62\x54\x79\x38\x53", E01X_ADDRESS_LENGTH);
-	else //E016H
-		XN297_SetTXAddr((uint8_t *)"\x5a\x53\x46\x30\x31", 5);  // bind address
-	NRF24L01_FlushTx();
-	NRF24L01_FlushRx();
-	NRF24L01_WriteReg(NRF24L01_07_STATUS, 0x70);     // Clear data ready, data sent, and retransmit
-	NRF24L01_WriteReg(NRF24L01_01_EN_AA, 0x00);      // No Auto Acknowldgement on all data pipes
-	NRF24L01_WriteReg(NRF24L01_03_SETUP_AW, 0x03);
-	NRF24L01_WriteReg(NRF24L01_04_SETUP_RETR, 0x00); // no retransmits
-	NRF24L01_SetBitrate(NRF24L01_BR_1M);             // 1 Mbps
-	NRF24L01_SetPower();
-	NRF24L01_Activate(0x73);                          // Activate feature register
-	NRF24L01_WriteReg(NRF24L01_1C_DYNPD, 0x00);       // Disable dynamic payload length on all pipes
-	NRF24L01_WriteReg(NRF24L01_1D_FEATURE, 0x01);     // Set feature bits on
-	NRF24L01_Activate(0x73);
 }
 
 uint16_t E01X_callback()
 {
-	if(IS_BIND_IN_PROGRESS)
+	#ifdef MULTI_SYNC
+		telemetry_set_input_sync(packet_period);
+	#endif
+	if(bind_counter)
 	{
+		bind_counter--;
 		if (bind_counter == 0)
 		{
-			if(sub_protocol==E016H)
-				XN297_SetTXAddr(rx_tx_addr, E01X_ADDRESS_LENGTH);
-			else
-				HS6200_SetTXAddr(rx_tx_addr,  E01X_ADDRESS_LENGTH);
+			HS6200_SetTXAddr(rx_tx_addr,  E01X_ADDRESS_LENGTH);
 			BIND_DONE;
 		}
-		else
-		{
-			E01X_send_packet(1);
-			bind_counter--;
-		}
-	}
-	else
-	{
-		#ifdef MULTI_SYNC
-			telemetry_set_input_sync(packet_period);
-		#endif
-		E01X_send_packet(0);
 	}
+	E01X_send_packet();
 	return packet_period;
 }
 
@@ -307,22 +208,7 @@ static void __attribute__((unused)) E012_initialize_txid()
 	}
 }
 
-static void __attribute__((unused)) E016H_initialize_txid()
-{
-	// tx id
-    rx_tx_addr[0] = 0xa5;
-    rx_tx_addr[1] = 0x00;
-
-    // rf channels
-    uint32_t lfsr=random(0xfefefefe);
-    for(uint8_t i=0; i<E016H_NUM_CHANNELS; i++)
-    {
-		hopping_frequency[i] = (lfsr & 0xFF) % 80; 
-		lfsr>>=8;
-	}
-}
-
-uint16_t initE01X()
+void E01X_init()
 {
 	BIND_IN_PROGRESS;
 	if(sub_protocol==E012)
@@ -330,7 +216,7 @@ uint16_t initE01X()
 		E012_initialize_txid();
 		packet_period=E012_PACKET_PERIOD;
 	}
-	else if(sub_protocol==E015)
+	else //E015
 	{
 		packet_period=E015_PACKET_PERIOD;
 		rf_ch_num=E015_RF_CHANNEL;
@@ -338,15 +224,9 @@ uint16_t initE01X()
 		arm_flags = 0;
 		arm_channel_previous = E01X_ARM_SW;
 	}
-	else
-	{ // E016H
-		E016H_initialize_txid();
-		packet_period=E016H_PACKET_PERIOD;
-	}
-	E01X_init();
+	E01X_RF_init();
 	bind_counter = E01X_BIND_COUNT;
 	hopping_frequency_no = 0;
-	return E01X_INITIAL_WAIT;
 }
 
 #endif

Multiprotocol/E129_cyrf6936.ino

@@ -0,0 +1,148 @@
+/*
+ This project is free software: you can redistribute it and/or modify
+ it under the terms of the GNU General Public License as published by
+ the Free Software Foundation, either version 3 of the License, or
+ (at your option) any later version.
+
+ Multiprotocol is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ GNU General Public License for more details.
+
+ You should have received a copy of the GNU General Public License
+ along with Multiprotocol.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#if defined(E129_CYRF6936_INO)
+
+#include "iface_rf2500.h"
+
+//#define E129_FORCE_ID
+
+#define E129_BIND_CH		0x2D	//45
+#define E129_PAYLOAD_SIZE	16
+
+static void __attribute__((unused)) E129_build_data_packet()
+{
+	//Build the packet
+	memset(packet,0,E129_PAYLOAD_SIZE);
+	packet[ 0] = 0x0F;									// Packet length
+	if(IS_BIND_IN_PROGRESS)
+	{
+		packet[ 1] = 0xA4;
+		packet[ 2] = bit_reverse(rx_tx_addr[2]);
+		packet[ 3] = bit_reverse(rx_tx_addr[3]);
+		packet[ 4] = bit_reverse(rx_tx_addr[0]);
+		packet[ 5] = bit_reverse(rx_tx_addr[1]);
+		for(uint8_t i=0; i<4; i++)
+			packet[6+i]=hopping_frequency[i]-2;
+	}
+	else
+	{
+		packet[ 1] = 0xA6;
+		packet[ 2] = 0xF7;								// High rate 0xF7, low rate 0xF4
+		//packet[ 3] = 0x00;							// Mode: short press=0x20->0x00->0x20->..., long press=0x10->0x30->0x10->...
+		packet[ 4] = GET_FLAG(CH5_SW, 0x20)				// Take off/Land 0x20
+				| GET_FLAG(CH6_SW, 0x04);				// Emergency stop 0x04
+		
+		uint16_t val = convert_channel_10b(AILERON,false);
+		uint8_t trim = convert_channel_8b(CH7) & 0xFC;
+		packet[ 5] = trim | (val >>8);					// Trim (0x00..0x1F..0x3E) << 2 | channel >> 8
+		packet[ 6] = val;								// channel (0x000...0x200...0x3FF)
+		val = convert_channel_10b(ELEVATOR,false);
+		trim = convert_channel_8b(CH8) & 0xFC;
+		packet[ 7] = trim | (val >>8);					// Trim (0x00..0x1F..0x3E) << 2 | channel >> 8
+		packet[ 8] = val;								// channel (0x000...0x200...0x3FF)
+		if(packet_count>200)
+			val = convert_channel_10b(THROTTLE,false);
+		else
+		{//Allow bind to complete with throttle not centered
+			packet_count++;
+			val=0x200;
+		}
+		packet[ 9] = (0x1F<<2) | (val >>8);				// Trim (0x00..0x1F..0x3E) << 2 | channel >> 8
+		packet[10] = val;								// channel (0x000...0x200...0x3FF)
+		val = convert_channel_10b(RUDDER,false);
+		trim = convert_channel_8b(CH9) & 0xFC;
+		packet[11] = trim | (val >>8);					// Trim (0x00..0x1F..0x3E) << 2 | channel >> 8
+		packet[12] = val;								// channel (0x000...0x200...0x3FF)
+	}
+	packet[14] = 0x00;									// Check
+	for(uint8_t i=0;i<14;i++)
+		packet[14] += packet[i];
+	
+	RF2500_BuildPayload(packet);
+}
+
+uint16_t E129_callback()
+{
+	//Set RF channel
+	if(phase==0)
+		RF2500_RFChannel(IS_BIND_IN_PROGRESS ? E129_BIND_CH : hopping_frequency[hopping_frequency_no]);
+
+	//Send packet
+	RF2500_SendPayload();
+	
+	//Send twice on same channel
+	if(phase==0)
+	{
+		phase++;
+		return 1260;
+	}
+
+	//Bind
+	if(bind_counter)
+		if(--bind_counter==0)
+		{
+			BIND_DONE;
+			RF2500_SetTXAddr(rx_tx_addr);	// 4 bytes of address
+		}
+
+	//Build packet
+	E129_build_data_packet();
+	
+	//Set power
+	RF2500_SetPower();
+	
+	//Hopp
+	hopping_frequency_no++;
+	hopping_frequency_no &= 3;
+
+	phase=0;
+	return 5200-1260;
+}
+
+void E129_init()
+{
+	BIND_IN_PROGRESS;						// Autobind protocol
+    bind_counter = 384;						// ~2sec
+
+    //RF2500 emu init
+	RF2500_Init(E129_PAYLOAD_SIZE, true);	// 16 bytes, Scrambled
+   
+	//Freq hopping
+	calc_fh_channels(4);
+	for(uint8_t i=0; i<4; i++)
+		if(hopping_frequency[i]==E129_BIND_CH)
+			hopping_frequency[i]++;
+	
+    #ifdef E129_FORCE_ID
+        rx_tx_addr[0]=0xC1;
+        rx_tx_addr[1]=0x22;
+        rx_tx_addr[2]=0x05;
+        rx_tx_addr[3]=0xA3;
+        hopping_frequency[0]=0x3C;			//60
+        hopping_frequency[1]=0x49;			//73
+        hopping_frequency[2]=0x4B;			//75
+        hopping_frequency[3]=0x41;			//65
+    #endif
+
+	RF2500_SetTXAddr((uint8_t*)"\xE2\x32\xE0\xC8");	// 4 bytes of bind address
+
+	E129_build_data_packet();
+	hopping_frequency_no=0;
+	packet_count=0;
+	phase=0;
+}
+
+#endif

Multiprotocol/ESky150_nrf24l01.ino

@@ -23,7 +23,7 @@
 #define ESKY150_BINDING_PACKET_PERIOD	2000
 #define ESKY150_SENDING_PACKET_PERIOD	4800
 
-static void __attribute__((unused)) ESKY150_init()
+static void __attribute__((unused)) ESKY150_RF_init()
 {
 	//Original TX always sets for channelx 0x22 and 0x4a
 	// Use channels 2..79
@@ -31,25 +31,16 @@ static void __attribute__((unused)) ESKY150_init()
 	hopping_frequency[1] = hopping_frequency[0] + 40;
 
 	NRF24L01_Initialize();
-	NRF24L01_WriteReg(NRF24L01_00_CONFIG, (_BV(NRF24L01_00_EN_CRC) | _BV(NRF24L01_00_CRCO))); 
-	NRF24L01_WriteReg(NRF24L01_01_EN_AA, 0x00);      // No Auto Acknoledgement
-	NRF24L01_WriteReg(NRF24L01_02_EN_RXADDR, 0x01);  // Enable data pipe 0
 	NRF24L01_WriteReg(NRF24L01_03_SETUP_AW, 0x02);   // 4-byte RX/TX address
-	NRF24L01_WriteReg(NRF24L01_04_SETUP_RETR, 0);    // Disable retransmit
-	NRF24L01_SetPower();
 	NRF24L01_SetBitrate(NRF24L01_BR_2M);
-	NRF24L01_WriteReg(NRF24L01_07_STATUS, 0x70);     // Clear data ready, data sent, and retransmit
 	NRF24L01_WriteReg(NRF24L01_11_RX_PW_P0, ESKY150_PAYLOADSIZE);   // bytes of data payload for pipe 0
 	NRF24L01_WriteRegisterMulti(NRF24L01_10_TX_ADDR, rx_tx_addr, ESKY150_TX_ADDRESS_SIZE);
 
-	NRF24L01_Activate(0x73);
 	NRF24L01_WriteReg(NRF24L01_1C_DYNPD, 1); // Dynamic payload for data pipe 0
 	// Enable: Dynamic Payload Length, Payload with ACK , W_TX_PAYLOAD_NOACK
 	NRF24L01_WriteReg(NRF24L01_1D_FEATURE, _BV(NRF2401_1D_EN_DPL) | _BV(NRF2401_1D_EN_ACK_PAY) | _BV(NRF2401_1D_EN_DYN_ACK));
-	NRF24L01_Activate(0x73);
-	NRF24L01_FlushTx();
-	// Turn radio power on
-	NRF24L01_SetTxRxMode(TX_EN);
+
+	NRF24L01_SetTxRxMode(TX_EN);						// Clear data ready, data sent, retransmit and enable CRC 16bits, ready for TX
 }
 
 static void __attribute__((unused)) ESKY150_bind_init()
@@ -171,16 +162,15 @@ uint16_t ESKY150_callback()
 	return ESKY150_SENDING_PACKET_PERIOD;
 }
 
-uint16_t initESKY150(void)
+void ESKY150_init(void)
 {
-	ESKY150_init();
+	ESKY150_RF_init();
 	if(IS_BIND_IN_PROGRESS)
 	{
 		bind_counter=3000;
 		ESKY150_bind_init();
 	}
 	hopping_frequency_no=0;
-	return 10000;
 }
 
 #endif

Multiprotocol/ESky150v2_cc2500.ino

@@ -52,17 +52,17 @@ static void __attribute__((unused)) ESKY150V2_set_freq(void)
 	hopping_frequency[ESKY150V2_NFREQCHANNELS]=ESKY150V2_BIND_CHANNEL;
 	
 	//Calib all channels
-	NRF250K_SetFreqOffset();	// Set frequency offset
-	NRF250K_HoppingCalib(ESKY150V2_NFREQCHANNELS+1);
+	CC2500_SetFreqOffset();	// Set frequency offset
+	CC2500_250K_HoppingCalib(ESKY150V2_NFREQCHANNELS+1);
 }
 
 static void __attribute__((unused)) ESKY150V2_send_packet()
 {
-	NRF250K_SetFreqOffset();	// Set frequency offset
-	NRF250K_Hopping(hopping_frequency_no);
+	CC2500_SetFreqOffset();	// Set frequency offset
+	CC2500_250K_Hopping(hopping_frequency_no);
 	if (++hopping_frequency_no >= ESKY150V2_NFREQCHANNELS)
 		hopping_frequency_no = 0;
-	NRF250K_SetPower();			//Set power level
+	CC2500_SetPower();			//Set power level
 
 	packet[0] = 0xFA;		// Unknown
 	packet[1] = 0x41;		// Unknown
@@ -79,7 +79,6 @@ static void __attribute__((unused)) ESKY150V2_send_packet()
 
 uint16_t ESKY150V2_callback()
 {
-	if(option==0) option=1; 	//Trick the RF component auto select system
 	if(IS_BIND_DONE)
 	{
 		#ifdef MULTI_SYNC
@@ -90,7 +89,7 @@ uint16_t ESKY150V2_callback()
 	else
 	{
 		BIND_DONE;					//Need full power for bind to work...
-		NRF250K_SetPower();			//Set power level
+		CC2500_SetPower();			//Set power level
 		BIND_IN_PROGRESS;
 		NRF250K_WritePayload(packet, ESKY150V2_BINDPAYLOADSIZE);
 		if (--bind_counter == 0)
@@ -105,10 +104,9 @@ uint16_t ESKY150V2_callback()
 	return ESKY150V2_PACKET_PERIOD;
 }
 
-uint16_t initESKY150V2()
+void ESKY150V2_init()
 {
-	if(option==0) option=1;		 // Trick the RF component auto select system
-	NRF250K_Init();
+	CC2500_250K_Init();
 	ESKY150V2_set_freq();
 	hopping_frequency_no = 0;
 
@@ -121,7 +119,7 @@ uint16_t initESKY150V2()
 	if(IS_BIND_IN_PROGRESS)
 	{
 		NRF250K_SetTXAddr((uint8_t *)"\x73\x73\x74\x63", ESKY150V2_TXID_SIZE);	//Bind address
-		NRF250K_Hopping(ESKY150V2_NFREQCHANNELS);	//Bind channel
+		CC2500_250K_Hopping(ESKY150V2_NFREQCHANNELS);	//Bind channel
 		memcpy(packet,"\x73\x73\x74\x63", ESKY150V2_TXID_SIZE);
 		memcpy(&packet[ESKY150V2_TXID_SIZE],rx_tx_addr, ESKY150V2_TXID_SIZE);
 		packet[8]=0x41;								//Unknown
@@ -135,7 +133,6 @@ uint16_t initESKY150V2()
 	}
 	else
 		NRF250K_SetTXAddr(rx_tx_addr, ESKY150V2_TXID_SIZE);
-	return 50000;
 }
 
 #endif

Multiprotocol/ESky_nrf24l01.ino

@@ -35,14 +35,10 @@ static void __attribute__((unused)) ESKY_set_data_address()
 	NRF24L01_WriteRegisterMulti(NRF24L01_10_TX_ADDR,    rx_tx_addr, 4);
 }
 
-static void __attribute__((unused)) ESKY_init()
+static void __attribute__((unused)) ESKY_RF_init()
 {
 	NRF24L01_Initialize();
 
-	// 2-bytes CRC, radio off
-	NRF24L01_WriteReg(NRF24L01_00_CONFIG, _BV(NRF24L01_00_EN_CRC) | _BV(NRF24L01_00_CRCO)); 
-	NRF24L01_WriteReg(NRF24L01_01_EN_AA, 0x00);            // No Auto Acknowledgement
-	NRF24L01_WriteReg(NRF24L01_02_EN_RXADDR, 0x01);        // Enable data pipe 0
 	if (IS_BIND_IN_PROGRESS)
 	{
 		NRF24L01_WriteReg(NRF24L01_03_SETUP_AW, 0x01);     // 3-byte RX/TX address for bind packets
@@ -51,11 +47,7 @@ static void __attribute__((unused)) ESKY_init()
 	}
 	else
 		ESKY_set_data_address();
-	NRF24L01_WriteReg(NRF24L01_04_SETUP_RETR, 0);          // No auto retransmission
 	NRF24L01_WriteReg(NRF24L01_05_RF_CH, 50);              // Channel 50 for bind packets
-	NRF24L01_SetBitrate(NRF24L01_BR_1M);                   // 1Mbps
-	NRF24L01_SetPower();
-	NRF24L01_WriteReg(NRF24L01_07_STATUS, 0x70);           // Clear data ready, data sent, and retransmit
 	NRF24L01_WriteReg(NRF24L01_11_RX_PW_P0, ESKY_PAYLOAD_SIZE);  // bytes of data payload for pipe 0
 	NRF24L01_WriteReg(NRF24L01_12_RX_PW_P1, ESKY_PAYLOAD_SIZE);
 	NRF24L01_WriteReg(NRF24L01_13_RX_PW_P2, ESKY_PAYLOAD_SIZE);
@@ -65,7 +57,7 @@ static void __attribute__((unused)) ESKY_init()
 	NRF24L01_WriteReg(NRF24L01_17_FIFO_STATUS, 0x00);      // Just in case, no real bits to write here
 }
 
-static void __attribute__((unused)) ESKY_init2()
+static void __attribute__((unused)) ESKY_TXID_init()
 {
 	NRF24L01_FlushTx();
 	if(sub_protocol==ESKY_STD)
@@ -187,7 +179,7 @@ uint16_t ESKY_callback()
 	return ESKY_STD_PACKET_PERIOD;
 }
 
-uint16_t initESKY(void)
+void ESKY_init(void)
 {
 	bind_counter = ESKY_BIND_COUNT;
 	rx_tx_addr[2] = rx_tx_addr[3];	// Model match
@@ -200,10 +192,9 @@ uint16_t initESKY(void)
 	  }
 	#endif
 	rx_tx_addr[3] = 0xBB;
-	ESKY_init();
-	ESKY_init2();
+	ESKY_RF_init();
+	ESKY_TXID_init();
 	packet_count=0;
-	return 50000;
 }
 
 #endif

Multiprotocol/FQ777_nrf24l01.ino

@@ -52,24 +52,18 @@ static void __attribute__((unused)) ssv_pack_dpl(uint8_t addr[], uint8_t pid, ui
 	header[0] = (addr[4] >> 7);
 
 	// calculate the crc
-	union 
-	{
-		uint8_t bytes[2];
-		uint16_t val;
-	} crc;
-
-	crc.val=0x3c18;
+	crc=0x3c18;
 	for (i = 0; i < 7; ++i)
-		crc.val=crc16_update(crc.val,header[i],8);
+		crc16_update(header[i],8);
 	for (i = 0; i < *len; ++i)
-		crc.val=crc16_update(crc.val,payload[i],8);
+		crc16_update(payload[i],8);
 
 	// encode payload and crc
 	// xor with this:
 	for (i = 0; i < *len; ++i)
 		payload[i] ^= ssv_xor[i];
-	crc.bytes[1] ^= ssv_xor[i++];
-	crc.bytes[0] ^= ssv_xor[i++];
+	crc ^= ssv_xor[i++]<<8;
+	crc ^= ssv_xor[i++];
 
 	// pack the pcf, payload, and crc into packed_payload
 	packed_payload[0] = pcf >> 1;
@@ -78,20 +72,20 @@ static void __attribute__((unused)) ssv_pack_dpl(uint8_t addr[], uint8_t pid, ui
 	for (i = 0; i < *len - 1; ++i)
 		packed_payload[i+2] = (payload[i] << 7) | (payload[i+1] >> 1);
 
-	packed_payload[i+2] = (payload[i] << 7) | (crc.val >> 9);
+	packed_payload[i+2] = (payload[i] << 7) | (crc >> 9);
 	++i;
-	packed_payload[i+2] = (crc.val >> 1 & 0x80 ) | (crc.val >> 1 & 0x7F);
+	packed_payload[i+2] = (crc >> 1 & 0x80 ) | (crc >> 1 & 0x7F);
 	++i;
-	packed_payload[i+2] = (crc.val << 7);
+	packed_payload[i+2] = (crc << 7);
 
 	*len += 4;
 }
 
-static void __attribute__((unused)) FQ777_send_packet(uint8_t bind)
+static void __attribute__((unused)) FQ777_send_packet()
 {
 	uint8_t packet_len = FQ777_PACKET_SIZE;
 	uint8_t packet_ori[8];
-	if (bind)
+	if (IS_BIND_IN_PROGRESS)
 	{
 		// 4,5,6 = address fields
 		// last field is checksum of address fields
@@ -144,7 +138,7 @@ static void __attribute__((unused)) FQ777_send_packet(uint8_t bind)
 		packet_count++;
 	}
 
-	ssv_pack_dpl( (0 == bind) ? rx_tx_addr : FQ777_bind_addr, hopping_frequency_no, &packet_len, packet_ori, packet);
+	ssv_pack_dpl( IS_BIND_IN_PROGRESS ? FQ777_bind_addr : rx_tx_addr, hopping_frequency_no, &packet_len, packet_ori, packet);
 	
 	NRF24L01_WriteReg(NRF24L01_00_CONFIG,_BV(NRF24L01_00_PWR_UP));
 	NRF24L01_WriteReg(NRF24L01_05_RF_CH, hopping_frequency[hopping_frequency_no++]);
@@ -156,30 +150,21 @@ static void __attribute__((unused)) FQ777_send_packet(uint8_t bind)
 	NRF24L01_WritePayload(packet, packet_len);
 }
 
-static void __attribute__((unused)) FQ777_init()
+static void __attribute__((unused)) FQ777_RF_init()
 {
 	NRF24L01_Initialize();
-	NRF24L01_SetTxRxMode(TX_EN);
+
 	NRF24L01_WriteRegisterMulti(NRF24L01_10_TX_ADDR, FQ777_bind_addr, 5);
-	NRF24L01_FlushTx();
-	NRF24L01_FlushRx();
-	NRF24L01_WriteReg(NRF24L01_01_EN_AA, 0x00);      // No Auto Acknowledgement on all data pipes
-	NRF24L01_WriteReg(NRF24L01_02_EN_RXADDR, 0x00);
-	NRF24L01_WriteReg(NRF24L01_03_SETUP_AW, 0x03);
-	NRF24L01_WriteReg(NRF24L01_04_SETUP_RETR, 0x00); // no retransmits
 	NRF24L01_SetBitrate(NRF24L01_BR_250K);
-	NRF24L01_SetPower();
-    NRF24L01_Activate(0x73);                         // Activate feature register
-    NRF24L01_WriteReg(NRF24L01_1C_DYNPD, 0x00);      // Disable dynamic payload length on all pipes
-    NRF24L01_WriteReg(NRF24L01_1D_FEATURE, 0x01);
-    NRF24L01_Activate(0x73);
 }
 
 uint16_t FQ777_callback()
 {
-	if(bind_counter!=0)
+	#ifdef MULTI_SYNC
+		telemetry_set_input_sync(FQ777_PACKET_PERIOD);
+	#endif
+	if(bind_counter)
 	{
-		FQ777_send_packet(1);
 		bind_counter--;
 		if (bind_counter == 0)
 		{
@@ -187,17 +172,11 @@ uint16_t FQ777_callback()
 			BIND_DONE;
 		}
 	}
-	else
-	{
-		#ifdef MULTI_SYNC
-			telemetry_set_input_sync(FQ777_PACKET_PERIOD);
-		#endif
-		FQ777_send_packet(0);
-	}
+	FQ777_send_packet();
 	return FQ777_PACKET_PERIOD;
 }
 
-uint16_t initFQ777(void)
+void FQ777_init(void)
 {
 	BIND_IN_PROGRESS;	// autobind protocol
 	bind_counter = FQ777_BIND_COUNT;
@@ -210,8 +189,7 @@ uint16_t initFQ777(void)
 	rx_tx_addr[2] = 0x00;
 	rx_tx_addr[3] = 0xe7;
 	rx_tx_addr[4] = 0x67;
-	FQ777_init();
-	return	FQ777_INITIAL_WAIT;
+	FQ777_RF_init();
 }
 
 #endif

Multiprotocol/FX816_nrf24l01.ino

@@ -16,7 +16,7 @@ Multiprotocol is distributed in the hope that it will be useful,
 
 #if defined(FX816_NRF24L01_INO)
 
-#include "iface_nrf24l01.h"
+#include "iface_xn297.h"
 
 #define FX816_INITIAL_WAIT    500
 #define FX816_PACKET_PERIOD   10000
@@ -27,7 +27,14 @@ Multiprotocol is distributed in the hope that it will be useful,
 
 static void __attribute__((unused)) FX816_send_packet()
 {
-	packet[0] = IS_BIND_IN_PROGRESS?0x55:0xAA;
+	if(IS_BIND_IN_PROGRESS)
+		packet[0] = 0x55;
+	else
+	{
+		XN297_Hopping(hopping_frequency_no++);
+		hopping_frequency_no%=FX816_RF_NUM_CHANNELS;
+		packet[0] = 0xAA;
+	}
 	packet[1] = rx_tx_addr[0];
 	packet[2] = rx_tx_addr[1];
 	uint8_t val=convert_channel_8b(AILERON);
@@ -44,37 +51,18 @@ static void __attribute__((unused)) FX816_send_packet()
 		val+=packet[i];
 	packet[5]=val;
 
-	NRF24L01_WriteReg(NRF24L01_05_RF_CH, IS_BIND_IN_PROGRESS ? FX816_RF_BIND_CHANNEL:hopping_frequency[hopping_frequency_no++]);
-	hopping_frequency_no%=FX816_RF_NUM_CHANNELS;
-
-	// clear packet status bits and TX FIFO
-	NRF24L01_WriteReg(NRF24L01_07_STATUS, 0x70);
-	NRF24L01_FlushTx();
+	// Send
+	XN297_SetPower();
+	XN297_SetTxRxMode(TX_EN);
 	XN297_WritePayload(packet, FX816_PAYLOAD_SIZE);
-
-	// Power on, TX mode, 2byte CRC
-	XN297_Configure(_BV(NRF24L01_00_EN_CRC) | _BV(NRF24L01_00_CRCO) | _BV(NRF24L01_00_PWR_UP));
-
-	NRF24L01_SetPower();	// Set tx_power
 }
 
-static void __attribute__((unused)) FX816_init()
+static void __attribute__((unused)) FX816_RF_init()
 {
-	NRF24L01_Initialize();
-	NRF24L01_SetTxRxMode(TX_EN);
+	XN297_Configure(XN297_CRCEN, XN297_SCRAMBLED, XN297_1M);
 	XN297_SetTXAddr((uint8_t *)"\xcc\xcc\xcc\xcc\xcc", 5);
-	NRF24L01_FlushTx();
-	NRF24L01_FlushRx();
-	NRF24L01_WriteReg(NRF24L01_07_STATUS, 0x70);     	// Clear data ready, data sent, and retransmit
-	NRF24L01_WriteReg(NRF24L01_01_EN_AA, 0x00);      	// No Auto Acknowldgement on all data pipes
-	NRF24L01_WriteReg(NRF24L01_02_EN_RXADDR, 0x01);  	// Enable data pipe 0 only
-	NRF24L01_SetBitrate(NRF24L01_BR_1M);             	// 1Mbps
-	NRF24L01_WriteReg(NRF24L01_04_SETUP_RETR, 0x00);	// No retransmits
-	NRF24L01_SetPower();
-	NRF24L01_Activate(0x73);							// Activate feature register
-	NRF24L01_WriteReg(NRF24L01_1C_DYNPD, 0x00);			// Disable dynamic payload length on all pipes
-	NRF24L01_WriteReg(NRF24L01_1D_FEATURE, 0x01);
-	NRF24L01_Activate(0x73);
+	//XN297_HoppingCalib(FX816_RF_NUM_CHANNELS);
+	XN297_RFChannel(FX816_RF_BIND_CHANNEL);
 }
 
 static void __attribute__((unused)) FX816_initialize_txid()
@@ -93,21 +81,20 @@ uint16_t FX816_callback()
 	#ifdef MULTI_SYNC
 		telemetry_set_input_sync(FX816_PACKET_PERIOD);
 	#endif
-	if(IS_BIND_IN_PROGRESS)
+	if(bind_counter)
 		if(--bind_counter==0)
 			BIND_DONE;
 	FX816_send_packet();
 	return FX816_PACKET_PERIOD;
 }
 
-uint16_t initFX816()
+void FX816_init()
 {
 	BIND_IN_PROGRESS;	// autobind protocol
 	FX816_initialize_txid();
-	FX816_init();
+	FX816_RF_init();
 	hopping_frequency_no = 0;
 	bind_counter=FX816_BIND_COUNT;
-	return FX816_INITIAL_WAIT;
 }
 
 #endif

Multiprotocol/FY326_nrf24l01.ino

@@ -88,34 +88,25 @@ static void __attribute__((unused)) FY326_send_packet(uint8_t bind)
 	NRF24L01_SetPower();	// Set tx_power
 }
 
-static void __attribute__((unused)) FY326_init()
+static void __attribute__((unused)) FY326_RF_init()
 {
 	NRF24L01_Initialize();
-	NRF24L01_SetTxRxMode(TX_EN);
+
 	if(sub_protocol==FY319)
 		NRF24L01_WriteReg(NRF24L01_03_SETUP_AW, 0x03);   // Five-byte rx/tx address
 	else
 		NRF24L01_WriteReg(NRF24L01_03_SETUP_AW, 0x01);   // Three-byte rx/tx address
 	NRF24L01_WriteRegisterMulti(NRF24L01_10_TX_ADDR,    (uint8_t *)"\x15\x59\x23\xc6\x29", 5);
 	NRF24L01_WriteRegisterMulti(NRF24L01_0A_RX_ADDR_P0, (uint8_t *)"\x15\x59\x23\xc6\x29", 5);
-    NRF24L01_FlushTx();
-    NRF24L01_FlushRx();
-    NRF24L01_WriteReg(NRF24L01_07_STATUS, 0x70);     // Clear data ready, data sent, and retransmit
-    NRF24L01_WriteReg(NRF24L01_01_EN_AA, 0x00);      // No Auto Acknowledgement on all data pipes
-    NRF24L01_WriteReg(NRF24L01_02_EN_RXADDR, 0x01);  // Enable data pipe 0 only
     NRF24L01_WriteReg(NRF24L01_11_RX_PW_P0, FY326_PACKET_SIZE);
     NRF24L01_WriteReg(NRF24L01_05_RF_CH, FY326_RF_BIND_CHANNEL);
     NRF24L01_SetBitrate(NRF24L01_BR_250K);
-    NRF24L01_SetPower();
 
-	NRF24L01_Activate(0x73);
     NRF24L01_WriteReg(NRF24L01_1C_DYNPD, 0x3f);
     NRF24L01_WriteReg(NRF24L01_1D_FEATURE, 0x07);
-	NRF24L01_Activate(0x73);
 
 	//Switch to RX
 	NRF24L01_SetTxRxMode(TXRX_OFF);
-	NRF24L01_FlushRx();
 	NRF24L01_SetTxRxMode(RX_EN);
 }
 
@@ -209,20 +200,19 @@ static void __attribute__((unused)) FY326_initialize_txid()
 			hopping_frequency[i]=rx_tx_addr[0] & ~0x80;
 }
 
-uint16_t initFY326(void)
+void FY326_init(void)
 {
 	BIND_IN_PROGRESS;	// autobind protocol
     rxid = 0xAA;
 	bind_counter = FY326_BIND_COUNT;
 	FY326_initialize_txid();
-	FY326_init();
+	FY326_RF_init();
 	if(sub_protocol==FY319)
 	{
 		phase=FY319_BIND1;
 	}
 	else
 		phase=FY326_BIND1;
-	return	FY326_INITIAL_WAIT;
 }
 
 #endif

Multiprotocol/Fake_nrf24l01.ino

@@ -0,0 +1,108 @@
+/*
+ This project is free software: you can redistribute it and/or modify
+ it under the terms of the GNU General Public License as published by
+ the Free Software Foundation, either version 3 of the License, or
+ (at your option) any later version.
+
+Multiprotocol is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ GNU General Public License for more details.
+
+ You should have received a copy of the GNU General Public License
+ along with Multiprotocol.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#if defined(FAKE_NRF24L01_INO)
+
+#include "iface_nrf250k.h"
+
+static void __attribute__((unused)) FAKE_send_packet()
+{
+	for(uint8_t i=0;i<5;i++)
+		packet[i]=i;
+	NRF24L01_WriteReg(NRF24L01_07_STATUS, (_BV(NRF24L01_07_RX_DR) | _BV(NRF24L01_07_TX_DS) | _BV(NRF24L01_07_MAX_RT)));
+	NRF24L01_FlushTx();
+	NRF24L01_WritePayload(packet, 5);
+}
+
+static void __attribute__((unused)) FAKE_init()
+{
+//	BIND_IN_PROGRESS;
+
+	//CC2500
+	option=1;
+	XN297L_Init();
+	CC2500_WriteReg(CC2500_07_PKTCTRL1,	0x01);   // Packet Automation Control
+	CC2500_WriteReg(CC2500_08_PKTCTRL0,	0x00);   // Packet Automation Control
+	CC2500_WriteReg(CC2500_12_MDMCFG2,	0x12);   // Modem Configuration
+	CC2500_WriteReg(CC2500_13_MDMCFG1,	0x13);   // Modem Configuration
+	CC2500_WriteReg(CC2500_04_SYNC1,	0x11);
+	CC2500_WriteReg(CC2500_05_SYNC0,	0x33);
+	CC2500_WriteReg(CC2500_09_ADDR,     0x99);
+	CC2500_WriteReg(CC2500_06_PKTLEN,	10);
+
+	CC2500_SetTxRxMode(RX_EN);
+	CC2500_Strobe(CC2500_SIDLE);
+	CC2500_Strobe(CC2500_SRX);
+	//CC2500_SetTxRxMode(TX_EN);
+	XN297L_RFChannel(0);
+
+	//NRF
+/*	option=0;
+	PE1_on;							//NRF24L01 antenna RF3 by default
+	PE2_off;						//NRF24L01 antenna RF3 by default
+	NRF24L01_Initialize();
+	NRF24L01_WriteReg(NRF24L01_00_CONFIG, 0x7f);
+	NRF24L01_WriteReg(NRF24L01_01_EN_AA, 0x00);//0x3f);       // AA on all pipes
+	NRF24L01_WriteReg(NRF24L01_02_EN_RXADDR, 0x3f);   // Enable all pipes
+	NRF24L01_WriteReg(NRF24L01_03_SETUP_AW, 0x03);    // 5-byte address
+	NRF24L01_WriteReg(NRF24L01_04_SETUP_RETR, 0x36);  // retransmit 1ms, 6 times
+	NRF24L01_SetBitrate(NRF24L01_BR_250K);              // 1Mbps
+	NRF24L01_SetPower();
+	NRF24L01_WriteRegisterMulti(NRF24L01_0A_RX_ADDR_P0, (uint8_t *)"\x99\x33\x11\xAA\xAA", 5);	//Bind address
+	NRF24L01_WriteRegisterMulti(NRF24L01_10_TX_ADDR,    (uint8_t *)"\x99\x33\x11\xAA\xAA", 5);	//Bind address
+	NRF24L01_WriteReg(NRF24L01_05_RF_CH, 0);
+	NRF24L01_Activate(0x73);                          // Activate feature register
+	NRF24L01_WriteReg(NRF24L01_1C_DYNPD, 0x3f);       // Enable dynamic payload length
+	NRF24L01_WriteReg(NRF24L01_1D_FEATURE, 0x07);     // Enable all features
+*/	
+	/*NRF24L01_FlushTx();
+    NRF24L01_SetTxRxMode(TX_EN);*/
+}
+
+uint16_t FAKE_callback()
+{
+	len = CC2500_ReadReg(CC2500_3B_RXBYTES | CC2500_READ_BURST) & 0x7F;
+	if(len) debug("L=%d, ",len);
+	if(len && len < sizeof(packet_in))
+	{
+		CC2500_ReadData(packet_in, len);
+		debug("P:");
+		for(uint8_t i=0;i<len;i++)
+			debug(" %02X", packet_in[i]);
+	}
+	if(len) debugln("");
+	CC2500_Strobe(CC2500_SFRX);
+	CC2500_Strobe(CC2500_SIDLE);
+	CC2500_Strobe(CC2500_SRX);
+
+	option=0;
+	//FAKE_send_packet();
+	
+	PE1_off;	//antenna RF2
+	PE2_on;
+	/*packet[0]=0x99;
+	for(uint8_t i=1;i<5;i++)
+		packet[i]=i;
+	CC2500_WriteData(packet, 5);*/
+	return 10000;
+}
+
+uint16_t initFAKE()
+{
+	FAKE_init();
+	return 5000;
+}
+
+#endif

Multiprotocol/FlySky_a7105.ino

@@ -12,7 +12,7 @@
  You should have received a copy of the GNU General Public License
  along with Multiprotocol.  If not, see <http://www.gnu.org/licenses/>.
  */
-// Last sync with hexfet new_protocols/flysky_a7105.c dated 2015-09-28
+// Last sync with hexfet new_protocols/FLYSKY_a7105.c dated 2015-09-28
 
 #if defined(FLYSKY_A7105_INO)
 
@@ -53,7 +53,7 @@ enum {
 const uint8_t PROGMEM V912_X17_SEQ[10] =  { 0x14, 0x31, 0x40, 0x49, 0x49,    // sometime first byte is 0x15 ?
 											0x49, 0x49, 0x49, 0x49, 0x49, }; 
 
-static void __attribute__((unused)) flysky_apply_extension_flags()
+static void __attribute__((unused)) FLYSKY_apply_extension_flags()
 {
 	switch(sub_protocol)
 	{
@@ -129,7 +129,7 @@ static void __attribute__((unused)) flysky_apply_extension_flags()
 	}
 }
 
-static void __attribute__((unused)) flysky_build_packet(uint8_t init)
+static void __attribute__((unused)) FLYSKY_send_packet()
 {
     uint8_t i;
 	//servodata timing range for flysky.
@@ -137,7 +137,7 @@ static void __attribute__((unused)) flysky_build_packet(uint8_t init)
 	//+100% =~ 0x07ca//=1994us(max)
 	//Center = 0x5d9//=1497us(center)
 	//channel order AIL;ELE;THR;RUD;CH5;CH6;CH7;CH8
-    packet[0] = init ? 0xaa : 0x55;
+    packet[0] = IS_BIND_IN_PROGRESS ? 0xaa : 0x55;
     packet[1] = rx_tx_addr[3];
     packet[2] = rx_tx_addr[2];
     packet[3] = rx_tx_addr[1];
@@ -150,36 +150,32 @@ static void __attribute__((unused)) flysky_build_packet(uint8_t init)
 		packet[5 + i*2]=temp&0xFF;		//low byte of servo timing(1000-2000us)
 		packet[6 + i*2]=(temp>>8)&0xFF;	//high byte of servo timing(1000-2000us)
 	}
-    flysky_apply_extension_flags();
+    FLYSKY_apply_extension_flags();
+
+	A7105_SetPower();
+	A7105_WriteData(21, IS_BIND_IN_PROGRESS ? 0x01:hopping_frequency[hopping_frequency_no & 0x0F]);
+	hopping_frequency_no++;
 }
 
-uint16_t ReadFlySky()
+uint16_t FLYSKY_callback()
 {
+	#ifdef MULTI_SYNC
+		telemetry_set_input_sync(packet_period);
+	#endif
 	#ifndef FORCE_FLYSKY_TUNING
 		A7105_AdjustLOBaseFreq(1);
 	#endif
-	if(IS_BIND_IN_PROGRESS)
+	if(bind_counter)
 	{
-		flysky_build_packet(1);
-		A7105_WriteData(21, 1);
 		bind_counter--;
 		if (bind_counter==0)
 			BIND_DONE;
 	}
-	else
-	{
-		#ifdef MULTI_SYNC
-			telemetry_set_input_sync(packet_period);
-		#endif
-		flysky_build_packet(0);
-		A7105_WriteData(21, hopping_frequency[hopping_frequency_no & 0x0F]);
-		A7105_SetPower();
-	}
-	hopping_frequency_no++;
+	FLYSKY_send_packet();
 	return packet_period;
 }
 
-const uint8_t PROGMEM tx_channels[8][4] = {
+const uint8_t PROGMEM FLYSKY_tx_channels[8][4] = {
 	{ 0x12, 0x34, 0x56, 0x78},
 	{ 0x18, 0x27, 0x36, 0x45},
 	{ 0x41, 0x82, 0x36, 0x57},
@@ -190,7 +186,7 @@ const uint8_t PROGMEM tx_channels[8][4] = {
 	{ 0x71, 0x86, 0x43, 0x52}
 };
 
-uint16_t initFlySky()
+void FLYSKY_init()
 {
 	uint8_t chanrow;
 	uint8_t chanoffset;
@@ -208,7 +204,7 @@ uint16_t initFlySky()
 	chanoffset=rx_tx_addr[3]/16;
 	for(uint8_t i=0;i<16;i++)
 	{
-		temp=pgm_read_byte_near(&tx_channels[chanrow>>1][i>>2]);
+		temp=pgm_read_byte_near(&FLYSKY_tx_channels[chanrow>>1][i>>2]);
 		if(i&0x02)
 			temp&=0x0F;
 		else
@@ -242,6 +238,5 @@ uint16_t initFlySky()
 		bind_counter = FLYSKY_BIND_COUNT;
 	else
 		bind_counter = 0;
-	return 2400;
 }
 #endif

Multiprotocol/FrSkyDVX_common.ino

@@ -17,8 +17,9 @@
 /**  FrSky D and X routines  **/
 /******************************/
 
-#if defined(FRSKYD_CC2500_INO) || defined(FRSKYX_CC2500_INO) || defined(FRSKYX_CC2500_INO) || defined(FRSKYL_CC2500_INO) || defined(FRSKY_RX_CC2500_INO) || defined(FRSKYR9_SX1276_INO)
+#if defined(FRSKYD_CC2500_INO) || defined(FRSKYX_CC2500_INO) || defined(FRSKYL_CC2500_INO) || defined(FRSKY_RX_CC2500_INO) || defined(FRSKYR9_SX1276_INO)
 	uint8_t FrSkyFormat=0;
+	uint8_t FrSkyX_chanskip;
 #endif
 
 #if defined(FRSKYX_CC2500_INO) || defined(FRSKYL_CC2500_INO) || defined(FRSKY_RX_CC2500_INO) || defined(FRSKYR9_SX1276_INO)
@@ -33,7 +34,7 @@ static uint16_t __attribute__((unused)) FrSkyX_CRCTable(uint8_t val)
 	val /= 16 ;
 	return word ^ (0x1081 * val) ;
 }
-uint16_t FrSkyX_crc(uint8_t *data, uint8_t len, uint8_t init=0)
+uint16_t FrSkyX_crc(uint8_t *data, uint8_t len, uint16_t init=0)
 {
 	uint16_t crc = init;
 	for(uint8_t i=0; i < len; i++)
@@ -184,11 +185,18 @@ void Frsky_init_clone(void)
 	else if(protocol==PROTO_FRSKYX2)
 		temp=FRSKYX2_CLONE_EEPROM_OFFSET;
 	FrSkyFormat=eeprom_read_byte((EE_ADDR)temp++);
+	/*	FRSKY_RX_D8			=0,
+	FRSKY_RX_D16FCC		=1,
+	FRSKY_RX_D16LBT		=2,
+	FRSKY_RX_D16v2FCC	=3,
+	FRSKY_RX_D16v2LBT	=4,*/
 	if(protocol==PROTO_FRSKYX)
 		FrSkyFormat >>= 1;
 	else
 		FrSkyFormat >>= 2;
 	FrSkyFormat <<= 1;	//FCC_16/LBT_16
+	if(sub_protocol==XCLONE_8)
+		FrSkyFormat++;	//FCC_8/LBT_8
 	rx_tx_addr[3] = eeprom_read_byte((EE_ADDR)temp++);
 	rx_tx_addr[2] = eeprom_read_byte((EE_ADDR)temp++);
 	rx_tx_addr[1] = eeprom_read_byte((EE_ADDR)temp++);
@@ -279,7 +287,7 @@ void Frsky_init_clone(void)
 	//FRSKYX
 		/*02_IOCFG0*/  	 0x06 ,
 		/*00_IOCFG2*/  	 0x06 ,
-		/*17_MCSM1*/   	 0x0c ,	//X2->0x0E -> Go/Stay in RX mode
+		/*17_MCSM1*/   	 0x0c ,	//X2->0x0E -> RX stays in RX and TX stays in TX???
 		/*18_MCSM0*/   	 0x18 ,
 		/*06_PKTLEN*/  	 0x1E ,
 		/*07_PKTCTRL1*/	 0x04 ,
@@ -367,7 +375,6 @@ void Frsky_init_clone(void)
 				val=option;
 			CC2500_WriteReg(reg,val);
 		}
-		prev_option = option ;		// Save option to monitor FSCTRL0 change
 		for(uint8_t i=0;i<17;i++)
 		{
 			uint8_t reg=pgm_read_byte_near(&FRSKY_common_end_cc2500_conf[i][0]);
@@ -380,21 +387,120 @@ void Frsky_init_clone(void)
 	}
 #endif
 
-#if defined(FRSKYX_CC2500_INO) || defined(FRSKYL_CC2500_INO)
-uint8_t FrSkyX_chanskip;
-uint8_t FrSkyX_TX_Seq, FrSkyX_TX_IN_Seq;
-uint8_t FrSkyX_RX_Seq ;
+#if defined(FRSKYX_CC2500_INO) || defined(FRSKYR9_SX1276_INO)
+	uint8_t FrSkyX_TX_Seq, FrSkyX_TX_IN_Seq;
+	uint8_t FrSkyX_RX_Seq ;
 
-#ifdef SPORT_SEND
-	struct t_FrSkyX_TX_Frame
+	#ifdef SPORT_SEND
+		struct t_FrSkyX_TX_Frame
+		{
+			uint8_t count;
+			uint8_t payload[8];
+		} ;
+		// Store FrskyX telemetry
+		struct t_FrSkyX_TX_Frame FrSkyX_TX_Frames[4] ;
+	#endif
+	
+	static void __attribute__((unused)) FrSkyX_seq_sport(uint8_t start, uint8_t end)
 	{
-		uint8_t count;
-		uint8_t payload[8];
-	} ;
-	// Store FrskyX telemetry
-	struct t_FrSkyX_TX_Frame FrSkyX_TX_Frames[4] ;
+		for (uint8_t i=start+1;i<=end;i++)
+			packet[i]=0;
+		packet[start] = FrSkyX_RX_Seq << 4;
+		#ifdef SPORT_SEND
+			if (FrSkyX_TX_IN_Seq!=0xFF)
+			{//RX has replied at least once
+				if (FrSkyX_TX_IN_Seq & 0x08)
+				{//Request init
+					//debugln("Init");
+					FrSkyX_TX_Seq = 0 ;	
+					for(uint8_t i=0;i<4;i++)
+						FrSkyX_TX_Frames[i].count=0;						//Discard frames in current output buffer
+				}
+				else if (FrSkyX_TX_IN_Seq & 0x04)
+				{//Retransmit the requested packet
+					debugln("Retry:%d",FrSkyX_TX_IN_Seq&0x03);
+					packet[start] |= FrSkyX_TX_IN_Seq&0x03;
+					packet[start+1]  = FrSkyX_TX_Frames[FrSkyX_TX_IN_Seq&0x03].count;
+					for (uint8_t i=start+2;i<start+2+FrSkyX_TX_Frames[FrSkyX_TX_IN_Seq&0x03].count;i++)
+						packet[i] = FrSkyX_TX_Frames[FrSkyX_TX_IN_Seq&0x03].payload[i];
+				}
+				else if ( FrSkyX_TX_Seq != 0x08 )
+				{
+					if(FrSkyX_TX_Seq==FrSkyX_TX_IN_Seq)
+					{//Send packet from the incoming radio buffer
+						//debugln("Send:%d",FrSkyX_TX_Seq);
+						packet[start] |= FrSkyX_TX_Seq;
+						uint8_t nbr_bytes=0;
+						for (uint8_t i=start+2;i<=end;i++)
+						{
+							if(SportHead==SportTail)
+								break; //buffer empty
+							packet[i]=SportData[SportHead];
+							FrSkyX_TX_Frames[FrSkyX_TX_Seq].payload[i-start+2]=SportData[SportHead];
+							SportHead=(SportHead+1) & (MAX_SPORT_BUFFER-1);
+							nbr_bytes++;
+						}
+						packet[start+1]=nbr_bytes;
+						FrSkyX_TX_Frames[FrSkyX_TX_Seq].count=nbr_bytes;
+						if(nbr_bytes)
+						{//Check the buffer status
+							uint8_t used = SportTail;
+							if ( SportHead > SportTail )
+								used += MAX_SPORT_BUFFER - SportHead ;
+							else
+								used -= SportHead ;
+							if ( used < (MAX_SPORT_BUFFER>>1) )
+							{
+								DATA_BUFFER_LOW_off;
+								debugln("Ok buf:%d",used);
+							}
+						}
+						FrSkyX_TX_Seq = ( FrSkyX_TX_Seq + 1 ) & 0x03 ;		//Next iteration send next packet
+					}
+					else
+					{//Not in sequence somehow, transmit what the receiver wants but why not asking for retransmit...
+						//debugln("RX_Seq:%d,TX:%d",FrSkyX_TX_IN_Seq,FrSkyX_TX_Seq);
+						packet[start] |= FrSkyX_TX_IN_Seq;
+						packet[start+1] = FrSkyX_TX_Frames[FrSkyX_TX_IN_Seq].count;
+						for (uint8_t i=start+2;i<start+2+FrSkyX_TX_Frames[FrSkyX_TX_IN_Seq].count;i++)
+							packet[i] = FrSkyX_TX_Frames[FrSkyX_TX_IN_Seq].payload[i-start+2];
+					}
+				}
+				else
+					packet[start] |= 0x08 ;									//FrSkyX_TX_Seq=8 at startup
+			}
+			if(packet[start+1])
+			{//Debug
+				debug("SP: ");
+				for(uint8_t i=0;i<packet[start+1];i++)
+					debug("%02X ",packet[start+2+i]);
+				debugln("");
+			}
+		#else
+			packet[start] |= FrSkyX_TX_Seq ;//TX=8 at startup
+			if ( !(FrSkyX_TX_IN_Seq & 0xF8) )
+				FrSkyX_TX_Seq = ( FrSkyX_TX_Seq + 1 ) & 0x03 ;				// Next iteration send next packet
+		#endif // SPORT_SEND
+	}
+
+	static void __attribute__((unused)) FrSkyX_telem_init(void)
+	{
+		FrSkyX_TX_Seq = 0x08 ;				// Request init
+		#ifdef SPORT_SEND
+			FrSkyX_TX_IN_Seq = 0xFF ;		// No sequence received yet
+			for(uint8_t i=0;i<4;i++)
+				FrSkyX_TX_Frames[i].count=0;// discard frames in current output buffer
+			SportHead=SportTail=0;			// empty data buffer
+		#endif
+		FrSkyX_RX_Seq = 0 ;					// Seq 0 to start with
+		#ifdef TELEMETRY
+			telemetry_lost=1;
+			telemetry_link=0;					//Stop sending telemetry
+		#endif
+	}
 #endif
 
+#if defined(FRSKYX_CC2500_INO) || defined(FRSKYL_CC2500_INO)
 static void __attribute__((unused)) FrSkyX_set_start(uint8_t ch )
 {
 	CC2500_Strobe(CC2500_SIDLE);
@@ -402,7 +508,7 @@ static void __attribute__((unused)) FrSkyX_set_start(uint8_t ch )
 	CC2500_WriteReg(CC2500_0A_CHANNR, hopping_frequency[ch]);
 }		
 
-static void __attribute__((unused)) FrSkyX_init()
+static void __attribute__((unused)) FrSkyX_RF_init()
 {
 	if(protocol==PROTO_FRSKYL)
 		FRSKY_init_cc2500(FRSKYL_cc2500_conf);
@@ -413,7 +519,7 @@ static void __attribute__((unused)) FrSkyX_init()
 		CC2500_WriteReg(CC2500_08_PKTCTRL0, 0x05);		// Enable CRC
 		if(!(FrSkyFormat&2))
 		{ // FCC
-			CC2500_WriteReg(CC2500_17_MCSM1, 0x0E);		// Go/Stay in RX mode
+			CC2500_WriteReg(CC2500_17_MCSM1, 0x0E);		//0x0E -> RX stays in RX and TX stays in TX???
 			CC2500_WriteReg(CC2500_11_MDMCFG3, 0x84);	// bitrate 70K->77K
 		}
 	}

Multiprotocol/FrSkyD_cc2500.ino

@@ -17,12 +17,12 @@
 
 #include "iface_cc2500.h"
 
-static void __attribute__((unused)) frsky2way_init(uint8_t bind)
+static void __attribute__((unused)) FRSKYD_RF_init()
 {
 	FRSKY_init_cc2500(FRSKYD_cc2500_conf);	
 
-	CC2500_WriteReg(CC2500_1B_AGCCTRL2, bind ? 0x43 : 0x03);
-	CC2500_WriteReg(CC2500_09_ADDR, bind ? 0x03 : rx_tx_addr[3]);
+	CC2500_WriteReg(CC2500_1B_AGCCTRL2, IS_BIND_IN_PROGRESS ? 0x43 : 0x03);
+	CC2500_WriteReg(CC2500_09_ADDR, IS_BIND_IN_PROGRESS ? 0x03 : rx_tx_addr[3]);
 	CC2500_WriteReg(CC2500_07_PKTCTRL1, 0x05);
 	CC2500_Strobe(CC2500_SIDLE);	// Go to idle...
 	//
@@ -32,7 +32,7 @@ static void __attribute__((unused)) frsky2way_init(uint8_t bind)
 	//#######END INIT########		
 }
 	
-static void __attribute__((unused)) frsky2way_build_bind_packet()
+static void __attribute__((unused)) FRSKYD_build_bind_packet()
 {
 	//11 03 01 d7 2d 00 00 1e 3c 5b 78 00 00 00 00 00 00 01
 	//11 03 01 19 3e 00 02 8e 2f bb 5c 00 00 00 00 00 00 01
@@ -54,10 +54,10 @@ static void __attribute__((unused)) frsky2way_build_bind_packet()
 	packet[14] = 0x00;
 	packet[15] = 0x00;
 	packet[16] = 0x00;
-	packet[17] = 0x01;
+	packet[17] = rx_tx_addr[1];
 }
 
-static void __attribute__((unused)) frsky2way_data_frame()
+static void __attribute__((unused)) FRSKYD_data_frame()
 {//pachet[4] is telemetry user frame counter(hub)
 	//11 d7 2d 22 00 01 c9 c9 ca ca 88 88 ca ca c9 ca 88 88
 	//11 57 12 00 00 01 f2 f2 f2 f2 06 06 ca ca ca ca 18 18
@@ -71,7 +71,7 @@ static void __attribute__((unused)) frsky2way_data_frame()
 		packet[4] = 0x00;
 	#endif
 
-	packet[5] = 0x01;
+	packet[5] = rx_tx_addr[1];
 	//
 	packet[10] = 0;
 	packet[11] = 0;
@@ -94,12 +94,13 @@ static void __attribute__((unused)) frsky2way_data_frame()
 	}
 } 
 
-uint16_t initFrSky_2way()
+void FRSKYD_init(void)
 {
 	//FrskyD init hop
 	if (sub_protocol==DCLONE)
 		Frsky_init_clone();
 	else
+	{
 		for(uint8_t i=0;i<50;i++)
 		{
 			uint8_t freq = (i * 0x1e) % 0xeb;
@@ -109,25 +110,26 @@ uint16_t initFrSky_2way()
 				freq=0;
 			hopping_frequency[i]=freq;
 		}
+		rx_tx_addr[1]=1;		// keep compatibility with already bound RXs
+	}
 	
 	packet_count=0;
 	if(IS_BIND_IN_PROGRESS)
 	{
-		frsky2way_init(1);
+		FRSKYD_RF_init();
 		state = FRSKY_BIND;
 	}
 	else
 	{
 		state = FRSKY_BIND_DONE;
 	}
-	return 10000;
 }	
 		
-uint16_t ReadFrSky_2way()
+uint16_t FRSKYD_callback(void)
 { 
 	if (state < FRSKY_BIND_DONE)
 	{
-		frsky2way_build_bind_packet();
+		FRSKYD_build_bind_packet();
 		CC2500_Strobe(CC2500_SIDLE);
 		CC2500_WriteReg(CC2500_0A_CHANNR, 0x00);
 		CC2500_WriteReg(CC2500_23_FSCAL3, 0x89);		
@@ -141,10 +143,10 @@ uint16_t ReadFrSky_2way()
 	}
 	if (state == FRSKY_BIND_DONE)
 	{
-		state = FRSKY_DATA2;
-		frsky2way_init(0);
-		counter = 0;
 		BIND_DONE;
+		FRSKYD_RF_init();
+		counter = 0;
+		state = FRSKY_DATA2;
 	}
 	else
 		if (state == FRSKY_DATA5)
@@ -178,7 +180,7 @@ uint16_t ReadFrSky_2way()
 					if(packet_in[len-1] & 0x80)
 					{//with valid crc
 						packet_count=0;
-						frsky_check_telemetry(packet_in,len);	//check if valid telemetry packets and buffer them.
+						frsky_process_telemetry(packet_in,len);	//check if valid telemetry packets and buffer them.
 					}
 				#endif
 			}
@@ -200,14 +202,10 @@ uint16_t ReadFrSky_2way()
 		}
 		CC2500_Strobe(CC2500_SIDLE);
 		CC2500_WriteReg(CC2500_0A_CHANNR, hopping_frequency[counter % 47]);
-		if ( prev_option != option )
-		{
-			CC2500_WriteReg(CC2500_0C_FSCTRL0,option);	// Frequency offset hack 
-			prev_option = option ;
-		}
+		CC2500_SetFreqOffset();
 		CC2500_WriteReg(CC2500_23_FSCAL3, 0x89);
 		CC2500_Strobe(CC2500_SFRX);        
-		frsky2way_data_frame();
+		FRSKYD_data_frame();
 		CC2500_WriteData(packet, packet[0]+1);
 		state++;
 	}				

Multiprotocol/FrSkyL_cc2500.ino

@@ -137,7 +137,7 @@ static void __attribute__((unused))  FrSkyL_encode_packet(bool type)
 	}
 }
 
-uint16_t ReadFrSkyL()
+uint16_t FRSKYL_callback()
 {
 	static uint8_t written=0, send=0;
 	switch(send)
@@ -200,11 +200,7 @@ uint16_t ReadFrSkyL()
 			break;
 
 		case FRSKY_DATA1:
-			if ( prev_option != option )
-			{
-				CC2500_WriteReg(CC2500_0C_FSCTRL0,option);				//Frequency offset hack 
-				prev_option = option ;
-			}
+			CC2500_SetFreqOffset();
 			FrSkyX_set_start(hopping_frequency_no);
 			FrSkyL_build_packet();
 			FrSkyL_encode_packet(true);
@@ -216,7 +212,7 @@ uint16_t ReadFrSkyL()
 	return 1;		
 }
 
-uint16_t initFrSkyL()
+void FRSKYL_init()
 {
 	set_rx_tx_addr(MProtocol_id_master);
 	rx_tx_addr[1]=0x02;		// ID related, hw version?
@@ -231,7 +227,7 @@ uint16_t initFrSkyL()
 	while(!FrSkyX_chanskip)
 		FrSkyX_chanskip=random(0xfefefefe)%47;
 
-	FrSkyX_init();
+	FrSkyX_RF_init();
 
 	//Prepare frame
 	memset(FrSkyL_buffer,0x00,FRSKYL_PACKET_LEN-3);
@@ -257,6 +253,5 @@ uint16_t initFrSkyL()
 		state = FRSKY_DATA1;
 		FrSkyX_initialize_data(0);
 	}
-	return 10000;
 }	
 #endif

Multiprotocol/FrSkyR9_sx1276.ino

@@ -1,39 +1,100 @@
 #if defined(FRSKYR9_SX1276_INO)
 #include "iface_sx1276.h"
 
-#define FREQ_MAP_SIZE	29
+#define DISP_FREQ_TABLE
 
-uint8_t FrSkyR9_step = 1;
-uint32_t FrSkyR9_freq_map[FREQ_MAP_SIZE];
+#define FLEX_FREQ	29
+#define FCC_FREQ	43
+#define EU_FREQ		19
+
+enum {
+	FRSKYR9_FREQ=0,
+	FRSKYR9_DATA,
+	FRSKYR9_RX1,
+	FRSKYR9_RX2,
+};
+
+void FrSkyR9_set_frequency()
+{
+	uint8_t data[3];
+	uint16_t num=0;
+	hopping_frequency_no += FrSkyX_chanskip;
+	switch(sub_protocol & 0xFD)
+	{
+		case R9_868:
+			if(IS_BIND_DONE)							// if bind is in progress use R9_915 instead
+			{
+				hopping_frequency_no %= FLEX_FREQ;
+				num=hopping_frequency_no;
+				if(hopping_frequency_no>=FLEX_FREQ-2)
+					num+=FrSkyX_chanskip-FLEX_FREQ+2;	// the last 2 values are FrSkyX_chanskip and FrSkyX_chanskip+1
+				num <<= 5;
+				num += 0xD700;
+				break;
+			}//else use R9_915
+		case R9_915:
+			hopping_frequency_no %= FLEX_FREQ;
+			num=hopping_frequency_no;
+			if(hopping_frequency_no>=FLEX_FREQ-2)
+				num+=FrSkyX_chanskip-FLEX_FREQ+2;		// the last 2 values are FrSkyX_chanskip and FrSkyX_chanskip+1
+			num <<= 5;
+			num += 0xE4C0;
+			break;
+		case R9_FCC:
+			hopping_frequency_no %= FCC_FREQ;
+			num=hopping_frequency_no;
+			num <<= 5;
+			num += 0xE200;
+			break;
+		case R9_EU:
+			hopping_frequency_no %= EU_FREQ;
+			num=hopping_frequency_no;
+			num <<= 4;
+			num += 0xD7D0;
+			break;
+	}
+	data[0] = num>>8;
+	data[1] = num&0xFF;
+	data[2] = 0x00;
+
+	#ifdef DISP_FREQ_TABLE
+		if(phase==0xFF)
+			debugln("F%d=%02X%02X%02X=%lu", hopping_frequency_no, data[0], data[1], data[2], (uint32_t)((data[0]<<16)+(data[1]<<8)+data[2])*61);
+	#endif
+	SX1276_WriteRegisterMulti(SX1276_06_FRFMSB, data, 3);
+}
 
 static void __attribute__((unused)) FrSkyR9_build_packet()
 {
-	//Header
-	packet[0] = 0x3C; 					// unknown but constant
-
 	//ID
-	packet[1] = rx_tx_addr[3];
-	packet[2] = rx_tx_addr[2];
+	packet[0] = rx_tx_addr[1];
+	packet[1] = rx_tx_addr[2];
+	packet[2] = rx_tx_addr[3];
 
 	//Hopping
 	packet[3] = hopping_frequency_no;	// current channel index
-	packet[4] = FrSkyR9_step;			// step size and last 2 channels start index
+	packet[4] = FrSkyX_chanskip;		// step size and last 2 channels start index
 
 	//RX number
 	packet[5] = RX_num;					// receiver number from OpenTX
 
-	// Set packet[6]=failsafe, packet[7]=0?? and packet[8..19]=channels data
-	FrSkyX_channels(6);
+	//Channels
+	FrSkyX_channels(6);					// Set packet[6]=failsafe, packet[7]=0?? and packet[8..19]=channels data
 
 	//Bind
 	if(IS_BIND_IN_PROGRESS)
-		packet[6] = 0x41; 
+	{// 915 0x01=CH1-8_TELEM_ON 0x41=CH1-8_TELEM_OFF 0xC1=CH9-16_TELEM_OFF 0x81=CH9-16_TELEM_ON
+		packet[6] = 0x01;				// bind indicator
+		if(sub_protocol & 1)
+			packet[6] |= 0x20;			// 868
+		if(binding_idx&0x01)
+			packet[6] |= 0x40;			// telem OFF
+		if(binding_idx&0x02)
+			packet[6] |= 0x80;			// ch9-16
+	}
 
-	//SPort
-	packet[20] = 0x08;					//FrSkyX_TX_Seq=8 at startup
-	packet[21] = 0x00;					// length?
-	packet[22] = 0x00;					// data1?
-	packet[23] = 0x00;					// data2?
+	//Sequence and send SPort
+	FrSkyX_seq_sport(20,23);			//20=RX|TXseq, 21=bytes count, 22&23=data
 
 	//CRC
 	uint16_t crc = FrSkyX_crc(packet, 24);
@@ -41,38 +102,92 @@ static void __attribute__((unused)) FrSkyR9_build_packet()
 	packet[25] = crc >> 8;				// high byte
 }
 
-uint16_t initFrSkyR9()
+static uint8_t __attribute__((unused)) FrSkyR9_CRC8(uint8_t *p, uint8_t l)
 {
+	uint8_t crc = 0xFF;
+	for (uint8_t i = 0; i < l; i++)
+    {
+		crc = crc ^ p[i];
+		for ( uint8_t j = 0; j < 8; j++ ) 
+			if ( crc & 0x80 )
+			{
+				crc <<= 1;
+				crc ^= 0x07;
+			}
+			else
+				crc <<= 1;
+	}
+	return crc;
+}
+
+static void __attribute__((unused)) FrSkyR9_build_EU_packet()
+{
+	//ID
+	packet[0] = rx_tx_addr[1];
+	packet[1] = rx_tx_addr[2];
+	packet[2] = rx_tx_addr[3];
+
+	//Hopping
+	packet[3] = FrSkyX_chanskip;		// step size and last 2 channels start index
+
+	//RX number
+	packet[4] = RX_num;					// receiver number from OpenTX
+
+	//Channels
+	//TODO FrSkyX_channels(5,4);			// Set packet[5]=failsafe and packet[6..11]=4 channels data
+
+	//Bind
+	if(IS_BIND_IN_PROGRESS)
+	{
+		packet[5] = 0x01;				// bind indicator
+		if((sub_protocol & 2) == 0)
+			packet[5] |= 0x10;			// 16CH
+		// if(sub_protocol & 1)
+			// packet[5] |= 0x20;			// 868
+		if(binding_idx&0x01)
+			packet[5] |= 0x40;			// telem OFF
+		if(binding_idx&0x02)
+			packet[5] |= 0x80;			// ch9-16
+	}
+
+	//Sequence and send SPort
+	packet[12] = (FrSkyX_RX_Seq << 4)|0x08;	//TX=8 at startup
+
+	//CRC
+	packet[13] = FrSkyR9_CRC8(packet, 13);
+}
+
+void FRSKYR9_init()
+{
+	//Check frequencies
+	#ifdef DISP_FREQ_TABLE
+		phase=0xFF;
+		FrSkyX_chanskip=1;
+		hopping_frequency_no=0xFF;
+		for(uint8_t i=0;i<FCC_FREQ;i++)
+			FrSkyR9_set_frequency();
+	#endif
+
+	//Reset ID
 	set_rx_tx_addr(MProtocol_id_master);
 
-	//FrSkyR9_step
-	FrSkyR9_step = 1 + (random(0xfefefefe) % 24);
-	debugln("Step=%d", FrSkyR9_step);
+	//FrSkyX_chanskip
+	FrSkyX_chanskip = 1 + (random(0xfefefefe) % 24);
+	debugln("chanskip=%d", FrSkyX_chanskip);
 	
-	//Frequency table
-	uint32_t start_freq=914472960;		//915
-	if(sub_protocol & 0x01)
-		start_freq=859504640;			//868
-	for(uint8_t i=0;i<FREQ_MAP_SIZE-2;i++)
-	{
-		FrSkyR9_freq_map[i]=start_freq;
-		debugln("F%d=%lu", i, FrSkyR9_freq_map[i]);
-		start_freq+=0x7A000;
-	}
-    // Last two frequencies determined by FrSkyR9_step
-	FrSkyR9_freq_map[FREQ_MAP_SIZE-2] = FrSkyR9_freq_map[FrSkyR9_step];
-	debugln("F%d=%lu", FREQ_MAP_SIZE-2, FrSkyR9_freq_map[FREQ_MAP_SIZE-2]);
-	FrSkyR9_freq_map[FREQ_MAP_SIZE-1] = FrSkyR9_freq_map[FrSkyR9_step+1];
-	debugln("F%d=%lu", FREQ_MAP_SIZE-1, FrSkyR9_freq_map[FREQ_MAP_SIZE-1]);
-	hopping_frequency_no = 0;
-
 	//Set FrSkyFormat
 	if((sub_protocol & 0x02) == 0)
-		FrSkyFormat=0;					// 16 channels
+		FrSkyFormat=0;											// 16 channels
 	else
-		FrSkyFormat=1;					// 8 channels
+		FrSkyFormat=1;											// 8 channels
 	debugln("%dCH", FrSkyFormat&1 ? 8:16);
 	
+	//EU packet length
+	if( (sub_protocol & 0xFD) == R9_EU )
+		packet_length=14;
+	else
+		packet_length=26;
+
 	//SX1276 Init
 	SX1276_SetMode(true, false, SX1276_OPMODE_SLEEP);
 	SX1276_SetMode(true, false, SX1276_OPMODE_STDBY);
@@ -89,56 +204,116 @@ uint16_t initFrSkyR9()
 	SX1276_SetPreambleLength(9);
 	SX1276_SetDetectionThreshold(SX1276_MODEM_DETECTION_THRESHOLD_SF6);
 	SX1276_SetLna(1, true);
-	SX1276_SetHopPeriod(0);				// 0 = disabled, we hop frequencies manually
-	SX1276_SetPaDac(true);
-	SX1276_SetTxRxMode(TX_EN);			// Set RF switch to TX
-
-	return 20000;						// start calling FrSkyR9_callback in 20 milliseconds
+	SX1276_SetHopPeriod(0);										// 0 = disabled, we hop frequencies manually
+	//RF Power
+	SX1276_SetPaDac(false);										// Disable 20dBm mode
+	#if MULTI_5IN1_INTERNAL == JP_T18
+		SX1276_SetPaConfig(true, 7, 0);							// Lowest power for the T18: 2dBm
+	#else
+		SX1276_SetPaConfig(true, 7, option);					// Use PA_HP on PA_BOOST, power=17-(15-option) dBm with option equal or lower to 15
+	#endif
+	SX1276_SetOcp(true,27);										// Set OCP to max 240mA
+	SX1276_SetTxRxMode(TX_EN);									// Set RF switch to TX
+	//Enable all IRQ flags
+	SX1276_WriteReg(SX1276_11_IRQFLAGSMASK,0x00);
+	FrSkyX_telem_init();
+	
+	hopping_frequency_no=0;
+	phase=FRSKYR9_FREQ;
 }
 
-uint16_t FrSkyR9_callback()
+uint16_t FRSKYR9_callback()
 {
-	//Force standby
-	SX1276_SetMode(true, false, SX1276_OPMODE_STDBY);
-
-	//SX1276_WriteReg(SX1276_11_IRQFLAGSMASK, 0xbf); // use only RxDone interrupt
-
-	// uint8_t buffer[2];
-	// buffer[0] = 0x00;
-	// buffer[1] = 0x00;
-	// SX1276_WriteRegisterMulti(SX1276_40_DIOMAPPING1, buffer, 2); // RxDone interrupt mapped to DIO0 (the rest are not used because of the REG_IRQ_FLAGS_MASK)
-
-	// SX1276_WriteReg(REG_PAYLOAD_LENGTH, 13);
-
-	// SX1276_WriteReg(REG_FIFO_ADDR_PTR, 0x00);
-
-	// SX1276_WriteReg(SX1276_01_OPMODE, 0x85); // RXCONTINUOUS
-	// delay(10); // 10 ms
-
-	// SX1276_WriteReg(SX1276_01_OPMODE, 0x81); // STDBY
-
-	// SX1276_WriteReg(SX1276_09_PACONFIG, 0xF0);
-
-	//Set power
-	// max power: 15dBm (10.8 + 0.6 * MaxPower [dBm])
-	// output_power: 2 dBm (17-(15-OutputPower) (if pa_boost_pin == true))
-	SX1276_SetPaConfig(true, 7, 0);
-	
-	//Set frequency
-	hopping_frequency_no = (hopping_frequency_no + FrSkyR9_step) % FREQ_MAP_SIZE;
-	SX1276_SetFrequency(FrSkyR9_freq_map[hopping_frequency_no]); // set current center frequency
-	delayMicroseconds(500);		//Frequency settle time
-
-	//Build packet
-	FrSkyR9_build_packet();
-	
-	//Send
-	SX1276_WritePayloadToFifo(packet, 26);
-	SX1276_SetMode(true, false, SX1276_OPMODE_TX);
-
-	// need to clear RegIrqFlags?
-
-    return 20000;
+	switch (phase)
+	{
+		case FRSKYR9_FREQ:
+			//Force standby
+			SX1276_SetMode(true, false, SX1276_OPMODE_STDBY);
+			//Set frequency
+			FrSkyR9_set_frequency(); 							// Set current center frequency
+			//Set power
+			// max power: 15dBm (10.8 + 0.6 * MaxPower [dBm])
+			// output_power: 2 dBm ( (if pa_boost_pin == true))
+			#if MULTI_5IN1_INTERNAL != JP_T18
+				if(option != prev_option)
+				{	// Set RF power if it has changed
+					SX1276_SetPaConfig(true, 7, option);		// Use PA_HP on PA_BOOST, power=17-(15-option) dBm with option equal or lower to 15
+					prev_option = option;
+				}
+			#endif
+			//Build packet
+			if( packet_length == 26 )
+				FrSkyR9_build_packet();
+			else
+				FrSkyR9_build_EU_packet();
+			phase++;
+			return 460;											// Frequency settle time
+		case FRSKYR9_DATA:
+			//Set RF switch to TX
+			SX1276_SetTxRxMode(TX_EN);
+			//Send packet
+			SX1276_WritePayloadToFifo(packet, packet_length);
+			SX1276_SetMode(true, false, SX1276_OPMODE_TX);
+#if not defined TELEMETRY
+			phase=FRSKYR9_FREQ;
+			return 20000-460;
+#else
+			phase++;
+			return 11140;										// Packet send time
+		case FRSKYR9_RX1:
+			//Force standby
+			SX1276_SetMode(true, false, SX1276_OPMODE_STDBY);
+			//RX packet size is 13
+			SX1276_WriteReg(SX1276_22_PAYLOAD_LENGTH, 13);
+			//Reset pointer
+			SX1276_WriteReg(SX1276_0D_FIFOADDRPTR, 0x00);
+			//Set RF switch to RX
+			SX1276_SetTxRxMode(RX_EN);
+			//Clear all IRQ flags
+			SX1276_WriteReg(SX1276_12_REGIRQFLAGS,0xFF);
+			//Switch to RX
+			SX1276_WriteReg(SX1276_01_OPMODE, 0x85);
+			phase++;
+			return 7400;
+		case FRSKYR9_RX2:
+			if( (SX1276_ReadReg(SX1276_12_REGIRQFLAGS)&0xF0) == (_BV(SX1276_REGIRQFLAGS_RXDONE) | _BV(SX1276_REGIRQFLAGS_VALIDHEADER)) )
+			{
+				if(SX1276_ReadReg(SX1276_13_REGRXNBBYTES)==13)
+				{
+					SX1276_ReadRegisterMulti(SX1276_00_FIFO,packet_in,13);
+					if( packet_in[9]==rx_tx_addr[1] && packet_in[10]==rx_tx_addr[2] && FrSkyX_crc(packet_in, 11, rx_tx_addr[1]+(rx_tx_addr[2]<<8))==(packet_in[11]+(packet_in[12]<<8)) )
+					{
+						if(packet_in[0]&0x80)
+							RX_RSSI=packet_in[0]<<1;
+						else
+							v_lipo1=(packet_in[0]<<1)+1;
+						//TX_LQI=~(SX1276_ReadReg(SX1276_19_PACKETSNR)>>2)+1;
+						TX_RSSI=SX1276_ReadReg(SX1276_1A_PACKETRSSI)-157;
+						for(uint8_t i=0;i<9;i++)
+							packet[4+i]=packet_in[i];			// Adjust buffer to match FrSkyX
+						frsky_process_telemetry(packet,len);	// Process telemetry packet
+						pps_counter++;
+						if(TX_LQI==0)
+							TX_LQI++;							// Recover telemetry right away
+					}
+				}
+			}
+			if (millis() - pps_timer >= 1000)
+			{//1 packet every 20ms
+				pps_timer = millis();
+				debugln("%d pps", pps_counter);
+				TX_LQI = pps_counter<<1;						// Max=100%
+				pps_counter = 0;
+			}
+			if(TX_LQI==0)
+				FrSkyX_telem_init();							// Reset telemetry
+			else
+				telemetry_link=1;								// Send telemetry out anyway
+			phase=FRSKYR9_FREQ;
+			break;
+#endif
+	}
+	return 1000;
 }
 
 #endif

Multiprotocol/FrSkyV_cc2500.ino

@@ -113,7 +113,7 @@ static void __attribute__((unused)) FRSKYV_build_data_packet()
 	packet[14] = FRSKYV_crc8(crc8, packet, 14);
 }
 
-uint16_t ReadFRSKYV()
+uint16_t FRSKYV_callback(void)
 {
 	if(IS_BIND_DONE)
 	{	// Normal operation
@@ -122,11 +122,7 @@ uint16_t ReadFRSKYV()
 		#endif
 		uint8_t chan = FRSKYV_calc_channel();
 		CC2500_Strobe(CC2500_SIDLE);
-		if (option != prev_option)
-		{
-			CC2500_WriteReg(CC2500_0C_FSCTRL0, option);
-			prev_option=option;
-		}
+		CC2500_SetFreqOffset();
 		CC2500_WriteReg(CC2500_0A_CHANNR, chan * 5 + 6);
 		FRSKYV_build_data_packet();
 
@@ -152,7 +148,7 @@ uint16_t ReadFRSKYV()
 	return 53460;
 }
 
-uint16_t initFRSKYV()
+void FRSKYV_init(void)
 {
 	//ID is 15 bits. Using rx_tx_addr[2] and rx_tx_addr[3] since we want to use RX_Num for model match
 	rx_tx_addr[2]&=0x7F;
@@ -162,7 +158,6 @@ uint16_t initFRSKYV()
 	seed = 1;
 	binding_idx=0;
 	phase = FRSKYV_DATA1;
-	return 10000;
 }
 
 #endif

Multiprotocol/FrSkyX_cc2500.ino

@@ -19,17 +19,14 @@
 
 static void __attribute__((unused)) FrSkyX_build_bind_packet()
 {
-	uint8_t packet_size = 0x1D;
-	if(protocol==PROTO_FRSKYX && (FrSkyFormat & 2 ))
-		packet_size=0x20;				// FrSkyX V1 LBT
 	//Header
-	packet[0] = packet_size;			// Number of bytes in the packet (after this one)
-	packet[1] = 0x03;					// Bind packet
-	packet[2] = 0x01;					// Bind packet
+	packet[0] = packet_length;				// Number of bytes in the packet (after this one)
+	packet[1] = 0x03;						// Bind packet
+	packet[2] = 0x01;						// Bind packet
 
 	//ID
-	packet[3] = rx_tx_addr[3];			// ID
-	packet[4] = rx_tx_addr[2];			// ID
+	packet[3] = rx_tx_addr[3];				// ID
+	packet[4] = rx_tx_addr[2];				// ID
 
 	if(protocol==PROTO_FRSKYX)
 	{
@@ -40,10 +37,10 @@ static void __attribute__((unused)) FrSkyX_build_bind_packet()
 		packet[8] = hopping_frequency[idx++];
 		packet[9] = hopping_frequency[idx++];
 		packet[10] = hopping_frequency[idx++];
-		packet[11] = rx_tx_addr[1];		// Unknown but constant ID?
+		packet[11] = rx_tx_addr[1];			// ID
 		packet[12] = RX_num;
 		//
-		memset(&packet[13], 0, packet_size - 14);
+		memset(&packet[13], 0, packet_length - 14);
 		if(binding_idx&0x01)
 			memcpy(&packet[13],(void *)"\x55\xAA\x5A\xA5",4);	// Telem off
 		if(binding_idx&0x02)
@@ -52,30 +49,34 @@ static void __attribute__((unused)) FrSkyX_build_bind_packet()
 	else
 	{
 		//packet 1D 03 01 0E 1C 02 00 00 32 0B 00 00 A8 26 28 01 A1 00 00 00 3E F6 87 C7 00 00 00 00 C9 C9
-		packet[5] = rx_tx_addr[1];		// Unknown but constant ID?
+		//Unknown bytes
+		if(state & 0x01)
+			memcpy(&packet[7],"\x00\x18\x0A\x00\x00\xE0\x02\x0B\x01\xD3\x08\x00\x00\x4C\xFE\x87\xC7",17);
+		else
+			memcpy(&packet[7],"\x27\xAD\x02\x00\x00\x64\xC8\x46\x00\x64\x00\x00\x00\xFB\xF6\x87\xC7",17);
+		//ID
+		packet[5] = rx_tx_addr[1];			// ID
 		packet[6] = RX_num;
 		//Bind flags
-		packet[7]=0;
 		if(binding_idx&0x01)
 			packet[7] |= 0x40;				// Telem off
 		if(binding_idx&0x02)
 			packet[7] |= 0x80;				// CH9-16
-		//Unknown bytes
-		memcpy(&packet[8],"\x32\x0B\x00\x00\xA8\x26\x28\x01\xA1\x00\x00\x00\x3E\xF6\x87\xC7",16);
-		packet[20]^= 0x0E ^ rx_tx_addr[3];	// Update the ID
-		packet[21]^= 0x1C ^ rx_tx_addr[2];	// Update the ID
+		//Replace the ID
+		packet[20] ^= 0x0E ^ rx_tx_addr[3];	// Update the ID
+		packet[21] ^= 0x1C ^ rx_tx_addr[2];	// Update the ID
 		//Xor
-		for(uint8_t i=3; i<packet_size-1; i++)
+		for(uint8_t i=3; i<packet_length-1; i++)
 			packet[i] ^= 0xA7;
 	}
 	//CRC
-	uint16_t lcrc = FrSkyX_crc(&packet[3], packet_size-4);
-	packet[packet_size-1] = lcrc >> 8;
-	packet[packet_size] = lcrc;
+	uint16_t lcrc = FrSkyX_crc(&packet[3], packet_length-4);
+	packet[packet_length-1] = lcrc >> 8;
+	packet[packet_length]   = lcrc;
 
 	/*//Debug
 	debug("Bind:");
-	for(uint8_t i=0;i<=packet_size;i++)
+	for(uint8_t i=0;i<=packet_length;i++)
 		debug(" %02X",packet[i]);
 	debugln("");*/
 }
@@ -85,11 +86,8 @@ static void __attribute__((unused)) FrSkyX_build_packet()
 	//0x1D 0xB3 0xFD 0x02 0x56 0x07 0x15 0x00 0x00 0x00 0x04 0x40 0x00 0x04 0x40 0x00 0x04 0x40 0x00 0x04 0x40 0x08 0x00 0x00 0x00 0x00 0x00 0x00 0x96 0x12
     // data frames sent every 9ms; failsafe every 9 seconds
 	//
-	uint8_t packet_size = 0x1D;
-	if(protocol==PROTO_FRSKYX && (FrSkyFormat & 2 ))
-		packet_size=0x20;				// FrSkyX V1 LBT
 	//Header
-	packet[0] = packet_size;			// Number of bytes in the packet (after this one)
+	packet[0] = packet_length;			// Number of bytes in the packet (after this one)
 	packet[1] = rx_tx_addr[3];			// ID
 	packet[2] = rx_tx_addr[2];			// ID
 	packet[3] = rx_tx_addr[1];			// Unknown but constant ID?
@@ -98,101 +96,25 @@ static void __attribute__((unused)) FrSkyX_build_packet()
 	packet[5] = FrSkyX_chanskip>>2;
 	packet[6] = RX_num;
 
+	//Channels
 	FrSkyX_channels(7);					// Set packet[7]=failsafe, packet[8]=0?? and packet[9..20]=channels data
 	
-	//sequence and send SPort
-	for (uint8_t i=22;i<packet_size-1;i++)
-		packet[i]=0;
-	packet[21] = FrSkyX_RX_Seq << 4;									//TX=8 at startup
-	#ifdef SPORT_SEND
-		if (FrSkyX_TX_IN_Seq!=0xFF)
-		{//RX has replied at least once
-			if (FrSkyX_TX_IN_Seq & 0x08)
-			{//Request init
-				//debugln("Init");
-				FrSkyX_TX_Seq = 0 ;	
-				for(uint8_t i=0;i<4;i++)
-					FrSkyX_TX_Frames[i].count=0;						//Discard frames in current output buffer
-			}
-			else if (FrSkyX_TX_IN_Seq & 0x04)
-			{//Retransmit the requested packet
-				debugln("Retry:%d",FrSkyX_TX_IN_Seq&0x03);
-				packet[21] |= FrSkyX_TX_IN_Seq&0x03;
-				packet[22]  = FrSkyX_TX_Frames[FrSkyX_TX_IN_Seq&0x03].count;
-				for (uint8_t i=23;i<23+FrSkyX_TX_Frames[FrSkyX_TX_IN_Seq&0x03].count;i++)
-					packet[i] = FrSkyX_TX_Frames[FrSkyX_TX_IN_Seq&0x03].payload[i];
-			}
-			else if ( FrSkyX_TX_Seq != 0x08 )
-			{
-				if(FrSkyX_TX_Seq==FrSkyX_TX_IN_Seq)
-				{//Send packet from the incoming radio buffer
-					//debugln("Send:%d",FrSkyX_TX_Seq);
-					packet[21] |= FrSkyX_TX_Seq;
-					uint8_t nbr_bytes=0;
-					for (uint8_t i=23;i<packet_size-1;i++)
-					{
-						if(SportHead==SportTail)
-							break; //buffer empty
-						packet[i]=SportData[SportHead];
-						FrSkyX_TX_Frames[FrSkyX_TX_Seq].payload[i-23]=SportData[SportHead];
-						SportHead=(SportHead+1) & (MAX_SPORT_BUFFER-1);
-						nbr_bytes++;
-					}
-					packet[22]=nbr_bytes;
-					FrSkyX_TX_Frames[FrSkyX_TX_Seq].count=nbr_bytes;
-					if(nbr_bytes)
-					{//Check the buffer status
-						uint8_t used = SportTail;
-						if ( SportHead > SportTail )
-							used += MAX_SPORT_BUFFER - SportHead ;
-						else
-							used -= SportHead ;
-						if ( used < (MAX_SPORT_BUFFER>>1) )
-						{
-							DATA_BUFFER_LOW_off;
-							debugln("Ok buf:%d",used);
-						}
-					}
-					FrSkyX_TX_Seq = ( FrSkyX_TX_Seq + 1 ) & 0x03 ;		//Next iteration send next packet
-				}
-				else
-				{//Not in sequence somehow, transmit what the receiver wants but why not asking for retransmit...
-					//debugln("RX_Seq:%d,TX:%d",FrSkyX_TX_IN_Seq,FrSkyX_TX_Seq);
-					packet[21] |= FrSkyX_TX_IN_Seq;
-					packet[22] = FrSkyX_TX_Frames[FrSkyX_TX_IN_Seq].count;
-					for (uint8_t i=23;i<23+FrSkyX_TX_Frames[FrSkyX_TX_IN_Seq].count;i++)
-						packet[i] = FrSkyX_TX_Frames[FrSkyX_TX_IN_Seq].payload[i-23];
-				}
-			}
-			else
-				packet[21] |= 0x08 ;									//FrSkyX_TX_Seq=8 at startup
-		}
-		if(packet[22])
-		{//Debug
-			debug("SP: ");
-			for(uint8_t i=0;i<packet[22];i++)
-				debug("%02X ",packet[23+i]);
-			debugln("");
-		}
-	#else
-		packet[21] |= FrSkyX_TX_Seq ;//TX=8 at startup
-		if ( !(FrSkyX_TX_IN_Seq & 0xF8) )
-			FrSkyX_TX_Seq = ( FrSkyX_TX_Seq + 1 ) & 0x03 ;				// Next iteration send next packet
-	#endif // SPORT_SEND
+	//Sequence and send SPort
+	FrSkyX_seq_sport(21,packet_length-2);	//21=RX|TXseq, 22=bytes count, 23..packet_length-2=data
 
 	//CRC
-	uint16_t lcrc = FrSkyX_crc(&packet[3], packet_size-4);
-	packet[packet_size-1] = lcrc >> 8;
-	packet[packet_size] = lcrc;
+	uint16_t lcrc = FrSkyX_crc(&packet[3], packet_length-4);
+	packet[packet_length-1] = lcrc >> 8;
+	packet[packet_length]   = lcrc;
 
 	/*//Debug
 	debug("Norm:");
-	for(uint8_t i=0;i<=packet_size;i++)
+	for(uint8_t i=0;i<=packet_length;i++)
 		debug(" %02X",packet[i]);
 	debugln("");*/
 }
 
-uint16_t ReadFrSkyX()
+uint16_t FRSKYX_callback()
 {
 	switch(state)
 	{	
@@ -208,28 +130,24 @@ uint16_t ReadFrSkyX()
 				state = FRSKY_BIND_DONE;
 			else
 				state++;
-			return 9000;
+			break;
 		case FRSKY_BIND_DONE:
 			FrSkyX_initialize_data(0);
 			hopping_frequency_no=0;
 			BIND_DONE;
-			state++;													//FRSKY_DATA1
+			state++;														//FRSKY_DATA1
 			break;
 
 		case FRSKY_DATA1:
 			CC2500_Strobe(CC2500_SIDLE);
-			if ( prev_option != option )
-			{
-				CC2500_WriteReg(CC2500_0C_FSCTRL0,option);				//Frequency offset hack 
-				prev_option = option ;
-			}
+			CC2500_SetFreqOffset();
 			FrSkyX_set_start(hopping_frequency_no);
 			FrSkyX_build_packet();
 			if(FrSkyFormat & 2)
 			{// LBT
-				CC2500_Strobe(CC2500_SRX);								//Acquire RSSI
+				CC2500_Strobe(CC2500_SRX);									//Acquire RSSI
 				state++;
-				return 400;		// LBT v2.1
+				return 400;		// LBT
 			}
 		case FRSKY_DATA2:
 			if(FrSkyFormat & 2)
@@ -239,135 +157,130 @@ uint16_t ReadFrSkyX()
 					rssi += CC2500_ReadReg(CC2500_34_RSSI | CC2500_READ_BURST);	// 0.5 db/count, RSSI value read from the RSSI status register is a 2's complement number
 				rssi>>=2;
 				#if 0
-					uint8_t rssi_level=convert_channel_8b(CH16)>>1;		//CH16 0..127
-					if ( rssi > rssi_level && rssi < 128)				//test rssi level dynamically
+					uint8_t rssi_level=convert_channel_8b(CH16)>>1;			//CH16 0..127
+					if ( rssi > rssi_level && rssi < 128)					//test rssi level dynamically
 				#else
-					if ( rssi > 14 && rssi < 128)						// if RSSI above -65dBm (12=-70) => ETSI requirement
+					if ( rssi > 14 && rssi < 128)							//if RSSI above -65dBm (12=-70) => ETSI requirement
 				#endif
 				{
-					LBT_POWER_on;										// Reduce to low power before transmitting
+					LBT_POWER_on;											//Reduce to low power before transmitting
 					debugln("Busy %d %d",hopping_frequency_no,rssi);
 				}
 			}
 			CC2500_Strobe(CC2500_SIDLE);
-			CC2500_Strobe(CC2500_SFTX);
+			CC2500_Strobe(CC2500_SFTX);										//Flush the TXFIFO
 			CC2500_SetTxRxMode(TX_EN);
 			CC2500_SetPower();
 			hopping_frequency_no = (hopping_frequency_no+FrSkyX_chanskip)%47;
 			CC2500_WriteData(packet, packet[0]+1);
 			state=FRSKY_DATA3;
 			if(FrSkyFormat & 2)
-				return 4000;	// LBT v2.1
+				return 4000;	// LBT
 			else
-				return 5200;	// FCC v2.1
+				return 5200;	// FCC
 		case FRSKY_DATA3:
 			CC2500_Strobe(CC2500_SIDLE);
+			CC2500_Strobe(CC2500_SFRX);										//Flush the RXFIFO
 			CC2500_SetTxRxMode(RX_EN);
 			CC2500_Strobe(CC2500_SRX);
 			state++;
 			if(FrSkyFormat & 2)
-				return 4100;	// LBT v2.1
+				return 4200;	// LBT
 			else
-				return 3300;	// FCC v2.1
-	case FRSKY_DATA4:
+				return 3400;	// FCC
+		case FRSKY_DATA4:
 			#ifdef MULTI_SYNC
 				telemetry_set_input_sync(9000);
 			#endif
 			#if defined TELEMETRY
-				telemetry_link=1;										//Send telemetry out anyway
-			#endif
-			len = CC2500_ReadReg(CC2500_3B_RXBYTES | CC2500_READ_BURST) & 0x7F;	
-			if (len && (len<=(0x0E + 3)))								//Telemetry frame is 17
-			{
-				//debug("Telem:");
-				packet_count=0;
-				CC2500_ReadData(packet_in, len);
-				#if defined TELEMETRY
-					if(protocol==PROTO_FRSKYX || (protocol==PROTO_FRSKYX2 && (packet_in[len-1] & 0x80)) )
-					{//with valid crc for FRSKYX2
+				len = CC2500_ReadReg(CC2500_3B_RXBYTES | CC2500_READ_BURST) & 0x7F;	
+				if (len && len <= 17)										//Telemetry frame is 17 bytes
+				{
+					//debug("Telem:");
+					CC2500_ReadData(packet_in, len);						//Read what has been received so far
+					if(len<17)
+					{//not all bytes were received
+						uint8_t last_len=CC2500_ReadReg(CC2500_3B_RXBYTES | CC2500_READ_BURST) & 0x7F;
+						if(last_len==17)									//All bytes received
+						{
+							CC2500_ReadData(packet_in+len, last_len-len);	//Finish to read
+							len=17;
+						}
+					}
+					if(len==17 && (protocol==PROTO_FRSKYX || (protocol==PROTO_FRSKYX2 && (packet_in[len-1] & 0x80))) )
+					{//Telemetry received with valid crc for FRSKYX2
 						//Debug
 						//for(uint8_t i=0;i<len;i++)
 						//	debug(" %02X",packet_in[i]);
-						frsky_check_telemetry(packet_in,len);			//Check and parse telemetry packets
+						if(frsky_process_telemetry(packet_in,len))			//Check and process telemetry packet
+						{//good packet received
+							pps_counter++;
+							if(TX_LQI==0)
+								TX_LQI++;									//Recover telemetry right away
+						}
 					}
-				#endif
-				//debugln("");
-			}
-			else
-			{
-				packet_count++;
-				//debugln("M %d",packet_count);
-				// restart sequence on missed packet - might need count or timeout instead of one missed
-				if(packet_count>100)
-				{//~1sec
-					FrSkyX_TX_Seq = 0x08 ;								//Request init
-					FrSkyX_TX_IN_Seq = 0xFF ;							//No sequence received yet
-					#ifdef SPORT_SEND
-						for(uint8_t i=0;i<4;i++)
-							FrSkyX_TX_Frames[i].count=0;				//Discard frames in current output buffer
-					#endif
-					packet_count=0;
-					#if defined TELEMETRY
-						telemetry_lost=1;
-						telemetry_link=0;								//Stop sending telemetry
-					#endif
+					//debugln("");
 				}
-				CC2500_Strobe(CC2500_SFRX);								//Flush the RXFIFO
-			}
+				if (millis() - pps_timer >= 900)
+				{//1 packet every 9ms
+					pps_timer = millis();
+					debugln("%d pps", pps_counter);
+					TX_LQI = pps_counter;									//Max=100%
+					pps_counter = 0;
+				}
+				if(TX_LQI==0)
+					FrSkyX_telem_init();									//Reset telemetry
+				else
+					telemetry_link=1;										//Send telemetry out anyway
+			#endif
 			state = FRSKY_DATA1;
-			return 500;	// FCC & LBT v2.1
-	}		
-	return 1;		
+			return 400;	// FCC & LBT
+	}
+	return 9000;
 }
 
-uint16_t initFrSkyX()
+void FRSKYX_init()
 {
 	set_rx_tx_addr(MProtocol_id_master);
 	FrSkyFormat = sub_protocol;
 	
-	if (sub_protocol==XCLONE)
+	if (sub_protocol==XCLONE_16||sub_protocol==XCLONE_8)
 		Frsky_init_clone();
-	else if(protocol==PROTO_FRSKYX)
-	{
-		Frsky_init_hop();
-		rx_tx_addr[1]=0x02;		// ID related, hw version?
-	}
 	else
 	{
-		#ifdef FRSKYX2_FORCE_ID
-			rx_tx_addr[3]=0x0E;
-			rx_tx_addr[2]=0x1C;
-			FrSkyX_chanskip=18;
-		#endif
+		if(protocol==PROTO_FRSKYX)
+			Frsky_init_hop();
+		else
+		{
+			#ifdef FRSKYX2_FORCE_ID
+				rx_tx_addr[3]=0x0E;
+				rx_tx_addr[2]=0x1C;
+				FrSkyX_chanskip=18;
+			#endif
+			FrSkyX2_init_hop();
+		}
 		rx_tx_addr[1]=0x02;		// ID related, hw version?
-		FrSkyX2_init_hop();
 	}
 	
+	if(protocol==PROTO_FRSKYX && (FrSkyFormat & 2 ))
+		packet_length = 0x20;	// FrSkyX V1 LBT
+	else
+		packet_length = 0x1D;
+
 	packet_count=0;
 	while(!FrSkyX_chanskip)
 		FrSkyX_chanskip=random(0xfefefefe)%47;
 
-	FrSkyX_init();
+	FrSkyX_RF_init();
 
 	if(IS_BIND_IN_PROGRESS)
 	{	   
+		memset(packet, 0, packet_length);
 		state = FRSKY_BIND;
 		FrSkyX_initialize_data(1);
 	}
 	else
-	{
-		state = FRSKY_DATA1;
-		FrSkyX_initialize_data(0);
-	}
-	FrSkyX_TX_Seq = 0x08 ;					// Request init
-	FrSkyX_TX_IN_Seq = 0xFF ;				// No sequence received yet
-	#ifdef SPORT_SEND
-		for(uint8_t i=0;i<4;i++)
-			FrSkyX_TX_Frames[i].count=0;	// discard frames in current output buffer
-		SportHead=SportTail=0;				// empty data buffer
-	#endif
-	FrSkyX_RX_Seq = 0 ;						// Seq 0 to start with
-	binding_idx=0;							// CH1-8 and Telem on
-	return 10000;
-}	
+		state = FRSKY_BIND_DONE;
+	FrSkyX_telem_init();
+}
 #endif

Multiprotocol/FrSky_Rx_cc2500.ino

@@ -40,7 +40,7 @@ enum {
 	FRSKY_RX_DATA,
 };
 
-const PROGMEM uint8_t frsky_rx_common_reg[][2] = {
+const PROGMEM uint8_t FRSKY_RX_common_reg[][2] = {
 	{CC2500_02_IOCFG0, 0x01},
 	{CC2500_18_MCSM0, 0x18},
 	{CC2500_07_PKTCTRL1, 0x05},
@@ -68,7 +68,7 @@ const PROGMEM uint8_t frsky_rx_common_reg[][2] = {
 	{CC2500_09_ADDR, 0x03},
 };
 
-const PROGMEM uint8_t frsky_rx_d16fcc_reg[][2] = {
+const PROGMEM uint8_t FRSKY_RX_d16fcc_reg[][2] = {
 	{CC2500_17_MCSM1, 0x0C},
 	{CC2500_0E_FREQ1, 0x76},
 	{CC2500_0F_FREQ0, 0x27},
@@ -81,7 +81,7 @@ const PROGMEM uint8_t frsky_rx_d16fcc_reg[][2] = {
 	{CC2500_15_DEVIATN, 0x51},
 };
 
-const PROGMEM uint8_t frsky_rx_d16lbt_reg[][2] = {
+const PROGMEM uint8_t FRSKY_RX_d16lbt_reg[][2] = {
 	{CC2500_17_MCSM1, 0x0E},
 	{CC2500_0E_FREQ1, 0x80},
 	{CC2500_0F_FREQ0, 0x00},
@@ -94,7 +94,7 @@ const PROGMEM uint8_t frsky_rx_d16lbt_reg[][2] = {
 	{CC2500_15_DEVIATN, 0x53},
 };
 
-const PROGMEM uint8_t frsky_rx_d8_reg[][2] = {
+const PROGMEM uint8_t FRSKY_RX_d8_reg[][2] = {
 	{CC2500_17_MCSM1,    0x0C},
 	{CC2500_0E_FREQ1,    0x76},
 	{CC2500_0F_FREQ0,    0x27},
@@ -107,32 +107,32 @@ const PROGMEM uint8_t frsky_rx_d8_reg[][2] = {
 	{CC2500_15_DEVIATN,  0x42},
 };
 
-static uint8_t frsky_rx_chanskip;
-static int8_t  frsky_rx_finetune;
-static uint8_t frsky_rx_format;
+static uint8_t FRSKY_RX_chanskip;
+static int8_t  FRSKY_RX_finetune;
+static uint8_t FRSKY_RX_format;
 
-static void __attribute__((unused)) frsky_rx_strobe_rx()
+static void __attribute__((unused)) FRSKY_RX_strobe_rx()
 {
 	 CC2500_Strobe(CC2500_SIDLE);
 	 CC2500_Strobe(CC2500_SFRX);
 	 CC2500_Strobe(CC2500_SRX);
 }
 
-static void __attribute__((unused)) frsky_rx_initialise_cc2500() {
-	const uint8_t frsky_rx_length[] = { FRSKY_RX_D8_LENGTH, FRSKY_RX_D16FCC_LENGTH, FRSKY_RX_D16LBT_LENGTH, FRSKY_RX_D16v2_LENGTH, FRSKY_RX_D16v2_LENGTH };
-	packet_length = frsky_rx_length[frsky_rx_format];
+static void __attribute__((unused)) FRSKY_RX_initialise_cc2500() {
+	const uint8_t FRSKY_RX_length[] = { FRSKY_RX_D8_LENGTH, FRSKY_RX_D16FCC_LENGTH, FRSKY_RX_D16LBT_LENGTH, FRSKY_RX_D16v2_LENGTH, FRSKY_RX_D16v2_LENGTH };
+	packet_length = FRSKY_RX_length[FRSKY_RX_format];
 	CC2500_Reset();
 	CC2500_Strobe(CC2500_SIDLE);
-	for (uint8_t i = 0; i < sizeof(frsky_rx_common_reg) / 2; i++)
-		CC2500_WriteReg(pgm_read_byte_near(&frsky_rx_common_reg[i][0]), pgm_read_byte_near(&frsky_rx_common_reg[i][1]));
+	for (uint8_t i = 0; i < sizeof(FRSKY_RX_common_reg) / 2; i++)
+		CC2500_WriteReg(pgm_read_byte_near(&FRSKY_RX_common_reg[i][0]), pgm_read_byte_near(&FRSKY_RX_common_reg[i][1]));
 
-	switch (frsky_rx_format)
+	switch (FRSKY_RX_format)
 	{
 		case FRSKY_RX_D16v2FCC:
 		case FRSKY_RX_D16FCC:
-			for (uint8_t i = 0; i < sizeof(frsky_rx_d16fcc_reg) / 2; i++)
-				CC2500_WriteReg(pgm_read_byte_near(&frsky_rx_d16fcc_reg[i][0]), pgm_read_byte_near(&frsky_rx_d16fcc_reg[i][1]));
-			if(frsky_rx_format==FRSKY_RX_D16v2FCC)
+			for (uint8_t i = 0; i < sizeof(FRSKY_RX_d16fcc_reg) / 2; i++)
+				CC2500_WriteReg(pgm_read_byte_near(&FRSKY_RX_d16fcc_reg[i][0]), pgm_read_byte_near(&FRSKY_RX_d16fcc_reg[i][1]));
+			if(FRSKY_RX_format==FRSKY_RX_D16v2FCC)
 			{
 				CC2500_WriteReg(CC2500_08_PKTCTRL0, 0x05);	// Enable CRC
 				CC2500_WriteReg(CC2500_17_MCSM1, 0x0E);		// Go/Stay in RX mode
@@ -141,36 +141,36 @@ static void __attribute__((unused)) frsky_rx_initialise_cc2500() {
 			break;
 		case FRSKY_RX_D16v2LBT:
 		case FRSKY_RX_D16LBT:
-			for (uint8_t i = 0; i < sizeof(frsky_rx_d16lbt_reg) / 2; i++)
-				CC2500_WriteReg(pgm_read_byte_near(&frsky_rx_d16lbt_reg[i][0]), pgm_read_byte_near(&frsky_rx_d16lbt_reg[i][1]));
-			if(frsky_rx_format==FRSKY_RX_D16v2LBT)
+			for (uint8_t i = 0; i < sizeof(FRSKY_RX_d16lbt_reg) / 2; i++)
+				CC2500_WriteReg(pgm_read_byte_near(&FRSKY_RX_d16lbt_reg[i][0]), pgm_read_byte_near(&FRSKY_RX_d16lbt_reg[i][1]));
+			if(FRSKY_RX_format==FRSKY_RX_D16v2LBT)
 				CC2500_WriteReg(CC2500_08_PKTCTRL0, 0x05);	// Enable CRC
 			break;
 		case FRSKY_RX_D8:
-			for (uint8_t i = 0; i < sizeof(frsky_rx_d8_reg) / 2; i++)
-				CC2500_WriteReg(pgm_read_byte_near(&frsky_rx_d8_reg[i][0]), pgm_read_byte_near(&frsky_rx_d8_reg[i][1]));
+			for (uint8_t i = 0; i < sizeof(FRSKY_RX_d8_reg) / 2; i++)
+				CC2500_WriteReg(pgm_read_byte_near(&FRSKY_RX_d8_reg[i][0]), pgm_read_byte_near(&FRSKY_RX_d8_reg[i][1]));
 			CC2500_WriteReg(CC2500_23_FSCAL3, 0x89);
 			break;
 	}
 	CC2500_WriteReg(CC2500_0A_CHANNR, 0);  // bind channel
 	rx_disable_lna = IS_POWER_FLAG_on;
 	CC2500_SetTxRxMode(rx_disable_lna ? TXRX_OFF : RX_EN); // lna disable / enable
-	frsky_rx_strobe_rx();
+	FRSKY_RX_strobe_rx();
 	delayMicroseconds(1000); // wait for RX to activate
 }
 
-static void __attribute__((unused)) frsky_rx_set_channel(uint8_t channel)
+static void __attribute__((unused)) FRSKY_RX_set_channel(uint8_t channel)
 {
 	CC2500_WriteReg(CC2500_0A_CHANNR, hopping_frequency[channel]);
-	if(frsky_rx_format == FRSKY_RX_D8)
+	if(FRSKY_RX_format == FRSKY_RX_D8)
 		CC2500_WriteReg(CC2500_23_FSCAL3, 0x89);
 	CC2500_WriteReg(CC2500_25_FSCAL1, calData[channel]);
-	frsky_rx_strobe_rx();
+	FRSKY_RX_strobe_rx();
 }
 
-static void __attribute__((unused)) frsky_rx_calibrate()
+static void __attribute__((unused)) FRSKY_RX_calibrate()
 {
-	frsky_rx_strobe_rx();
+	FRSKY_RX_strobe_rx();
 	for (unsigned c = 0; c < 47; c++)
 	{
 		CC2500_Strobe(CC2500_SIDLE);
@@ -193,7 +193,7 @@ static uint8_t __attribute__((unused)) frskyx_rx_check_crc_id(bool bind,bool ini
 	uint8_t offset=bind?3:1;
 	
 	// Check D8 checksum
-	if (frsky_rx_format == FRSKY_RX_D8)
+	if (FRSKY_RX_format == FRSKY_RX_D8)
 	{
 		if((packet[packet_length+1] & 0x80) != 0x80)	// Check CRC_OK flag in status byte 2
 			return false; 								// Bad CRC
@@ -201,15 +201,16 @@ static uint8_t __attribute__((unused)) frskyx_rx_check_crc_id(bool bind,bool ini
 		{//Save TXID
 			rx_tx_addr[3] = packet[3];
 			rx_tx_addr[2] = packet[4];
+			rx_tx_addr[1] = packet[17];
 		}
 		else
-			if(rx_tx_addr[3] != packet[offset] || rx_tx_addr[2] != packet[offset+1])
+			if(rx_tx_addr[3] != packet[offset] || rx_tx_addr[2] != packet[offset+1] || rx_tx_addr[1] != packet[bind?17:5])
 				return false;							// Bad address
 		return true;									// Full match
 	}
 
 	// Check D16v2 checksum
-	if (frsky_rx_format == FRSKY_RX_D16v2LBT || frsky_rx_format == FRSKY_RX_D16v2FCC)
+	if (FRSKY_RX_format == FRSKY_RX_D16v2LBT || FRSKY_RX_format == FRSKY_RX_D16v2FCC)
 		if((packet[packet_length+1] & 0x80) != 0x80)	// Check CRC_OK flag in status byte 2
 			return false;
 	//debugln("HW Checksum ok");
@@ -221,12 +222,12 @@ static uint8_t __attribute__((unused)) frskyx_rx_check_crc_id(bool bind,bool ini
 		return false; 									// Bad CRC
 	//debugln("Checksum ok");
 
-	if (bind && (frsky_rx_format == FRSKY_RX_D16v2LBT || frsky_rx_format == FRSKY_RX_D16v2FCC))
+	if (bind && (FRSKY_RX_format == FRSKY_RX_D16v2LBT || FRSKY_RX_format == FRSKY_RX_D16v2FCC))
 		for(uint8_t i=3; i<packet_length-2; i++)		//unXOR bind packet
 			packet[i] ^= 0xA7;
 	
 	uint8_t offset2=0;
-	if (bind && (frsky_rx_format == FRSKY_RX_D16LBT || frsky_rx_format == FRSKY_RX_D16FCC))
+	if (bind && (FRSKY_RX_format == FRSKY_RX_D16LBT || FRSKY_RX_format == FRSKY_RX_D16FCC))
 		offset2=6;
 	if(init)
 	{//Save TXID
@@ -247,7 +248,7 @@ static uint8_t __attribute__((unused)) frskyx_rx_check_crc_id(bool bind,bool ini
 	return true;										// Full match
 }
 
-static void __attribute__((unused)) frsky_rx_build_telemetry_packet()
+static void __attribute__((unused)) FRSKY_RX_build_telemetry_packet()
 {
 	uint16_t raw_channel[8];
 	uint32_t bits = 0;
@@ -255,7 +256,7 @@ static void __attribute__((unused)) frsky_rx_build_telemetry_packet()
 	uint8_t idx = 0;
 	uint8_t i;
 
-	if (frsky_rx_format == FRSKY_RX_D8)
+	if (FRSKY_RX_format == FRSKY_RX_D8)
 	{// decode D8 channels
 		raw_channel[0] = ((packet[10] & 0x0F) << 8 | packet[6]);
 		raw_channel[1] = ((packet[10] & 0xF0) << 4 | packet[7]);
@@ -298,7 +299,7 @@ static void __attribute__((unused)) frsky_rx_build_telemetry_packet()
 	packet_in[idx++] = RX_LQI;
 	packet_in[idx++] = RX_RSSI;
 	packet_in[idx++] = 0;  // start channel
-	packet_in[idx++] = frsky_rx_format == FRSKY_RX_D8 ? 8 : 16; // number of channels in packet
+	packet_in[idx++] = FRSKY_RX_format == FRSKY_RX_D8 ? 8 : 16; // number of channels in packet
 
 	// pack channels
 	for (i = 0; i < packet_in[3]; i++) {
@@ -312,29 +313,29 @@ static void __attribute__((unused)) frsky_rx_build_telemetry_packet()
 	}
 }
 
-static void __attribute__((unused)) frsky_rx_data()
+static void __attribute__((unused)) FRSKY_RX_data()
 {
 	uint16_t temp = FRSKY_RX_EEPROM_OFFSET;
-	frsky_rx_format = eeprom_read_byte((EE_ADDR)temp++) % FRSKY_RX_FORMATS;
+	FRSKY_RX_format = eeprom_read_byte((EE_ADDR)temp++) % FRSKY_RX_FORMATS;
 	rx_tx_addr[3] = eeprom_read_byte((EE_ADDR)temp++);
 	rx_tx_addr[2] = eeprom_read_byte((EE_ADDR)temp++);
 	rx_tx_addr[1] = eeprom_read_byte((EE_ADDR)temp++);
 	rx_tx_addr[0] = RX_num;
-	frsky_rx_finetune = eeprom_read_byte((EE_ADDR)temp++);
-	debug("format=%d, ", frsky_rx_format);
+	FRSKY_RX_finetune = eeprom_read_byte((EE_ADDR)temp++);
+	debug("format=%d, ", FRSKY_RX_format);
 	debug("addr[3]=%02X, ", rx_tx_addr[3]);
 	debug("addr[2]=%02X, ", rx_tx_addr[2]);
 	debug("addr[1]=%02X, ", rx_tx_addr[1]);
 	debug("rx_num=%02X, ",  rx_tx_addr[0]);
-	debugln("tune=%d", (int8_t)frsky_rx_finetune);
-	if(frsky_rx_format != FRSKY_RX_D16v2LBT && frsky_rx_format != FRSKY_RX_D16v2FCC)
+	debugln("tune=%d", (int8_t)FRSKY_RX_finetune);
+	if(FRSKY_RX_format != FRSKY_RX_D16v2LBT && FRSKY_RX_format != FRSKY_RX_D16v2FCC)
 	{//D8 & D16v1
 		for (uint8_t ch = 0; ch < 47; ch++)
 			hopping_frequency[ch] = eeprom_read_byte((EE_ADDR)temp++);
 	}
 	else
 	{
-		FrSkyFormat=frsky_rx_format == FRSKY_RX_D16v2FCC?0:2;
+		FrSkyFormat=FRSKY_RX_format == FRSKY_RX_D16v2FCC?0:2;
 		FrSkyX2_init_hop();
 	}
 	debug("ch:");
@@ -342,52 +343,74 @@ static void __attribute__((unused)) frsky_rx_data()
 		debug(" %02X", hopping_frequency[ch]);
 	debugln("");
 
-	frsky_rx_initialise_cc2500();
-	frsky_rx_calibrate();
+	FRSKY_RX_initialise_cc2500();
+	FRSKY_RX_calibrate();
 	CC2500_WriteReg(CC2500_18_MCSM0, 0x08); // FS_AUTOCAL = manual
 	CC2500_WriteReg(CC2500_09_ADDR, rx_tx_addr[3]); // set address
 	CC2500_WriteReg(CC2500_07_PKTCTRL1, 0x05); // check address
 	if (option == 0)
-		CC2500_WriteReg(CC2500_0C_FSCTRL0, frsky_rx_finetune);
+		CC2500_WriteReg(CC2500_0C_FSCTRL0, FRSKY_RX_finetune);
 	else
 		CC2500_WriteReg(CC2500_0C_FSCTRL0, option);
-	frsky_rx_set_channel(hopping_frequency_no);
+	FRSKY_RX_set_channel(hopping_frequency_no);
 	phase = FRSKY_RX_DATA;
 }
 
-uint16_t initFrSky_Rx()
+void FRSKY_RX_init()
 {
-	state = 0;
-	frsky_rx_chanskip = 1;
-	hopping_frequency_no = 0;
-	rx_data_started = false;
-	frsky_rx_finetune = 0;
-	telemetry_link = 0;
-	packet_count = 0;
-	if (IS_BIND_IN_PROGRESS)
+	if(sub_protocol == FRSKY_ERASE)
 	{
-		frsky_rx_format = FRSKY_RX_D8;
-		frsky_rx_initialise_cc2500();
-		phase = FRSKY_RX_TUNE_START;
-		debugln("FRSKY_RX_TUNE_START");
+		if(IS_BIND_IN_PROGRESS)
+		{// Clear all cloned addresses
+			uint16_t addr[]={ FRSKYD_CLONE_EEPROM_OFFSET+1, FRSKYX_CLONE_EEPROM_OFFSET+1, FRSKYX2_CLONE_EEPROM_OFFSET+1 };
+			for(uint8_t i=0; i<3;i++)
+				for(uint8_t j=0; j<3;j++)
+					eeprom_write_byte((EE_ADDR)(addr[i]+j), 0xFF);
+			packet_count = 100;
+		}			
 	}
 	else
-		frsky_rx_data();
-	return 1000;
+	{
+		FRSKY_RX_chanskip = 1;
+		hopping_frequency_no = 0;
+		rx_data_started = false;
+		FRSKY_RX_finetune = 0;
+		telemetry_link = 0;
+		packet_count = 0;
+		if (IS_BIND_IN_PROGRESS)
+		{
+			FRSKY_RX_format = FRSKY_RX_D8;
+			FRSKY_RX_initialise_cc2500();
+			phase = FRSKY_RX_TUNE_START;
+			debugln("FRSKY_RX_TUNE_START");
+		}
+		else
+			FRSKY_RX_data();
+	}
 }
 
-uint16_t FrSky_Rx_callback()
+uint16_t FRSKY_RX_callback()
 {
-	static uint32_t pps_timer=0;
-	static uint8_t pps_counter=0;
 	static int8_t read_retry = 0;
 	static int8_t tune_low, tune_high;
 	uint8_t len, ch;
 
+	if(sub_protocol == FRSKY_ERASE)
+	{
+		if(packet_count)
+			packet_count--;
+		else
+			BIND_DONE;
+		return 10000;	//  Nothing to do...
+	}
+
+	if(IS_BIND_DONE && phase != FRSKY_RX_DATA)
+		FRSKY_RX_init();	// Abort bind
+
 	if ((prev_option != option) && (phase >= FRSKY_RX_DATA))
 	{
 		if (option == 0)
-			CC2500_WriteReg(CC2500_0C_FSCTRL0, frsky_rx_finetune);
+			CC2500_WriteReg(CC2500_0C_FSCTRL0, FRSKY_RX_finetune);
 		else
 			CC2500_WriteReg(CC2500_0C_FSCTRL0, option);
 		prev_option = option;
@@ -408,19 +431,20 @@ uint16_t FrSky_Rx_callback()
 				CC2500_ReadData(packet, len);
 				if(frskyx_rx_check_crc_id(true,true))
 				{
-					frsky_rx_finetune = -127;
-					CC2500_WriteReg(CC2500_0C_FSCTRL0, frsky_rx_finetune);
+					FRSKY_RX_finetune = -127;
+					CC2500_WriteReg(CC2500_0C_FSCTRL0, FRSKY_RX_finetune);
 					phase = FRSKY_RX_TUNE_LOW;
 					debugln("FRSKY_RX_TUNE_LOW");
-					frsky_rx_strobe_rx();
+					FRSKY_RX_strobe_rx();
+					state = 0;
 					return 1000;
 				}
 			}
-			frsky_rx_format = (frsky_rx_format + 1) % FRSKY_RX_FORMATS; // switch to next format (D8, D16FCC, D16LBT, D16v2FCC, D16v2LBT)
-			frsky_rx_initialise_cc2500();
-			frsky_rx_finetune += 10;
-			CC2500_WriteReg(CC2500_0C_FSCTRL0, frsky_rx_finetune);
-			frsky_rx_strobe_rx();
+			FRSKY_RX_format = (FRSKY_RX_format + 1) % FRSKY_RX_FORMATS; // switch to next format (D8, D16FCC, D16LBT, D16v2FCC, D16v2LBT)
+			FRSKY_RX_initialise_cc2500();
+			FRSKY_RX_finetune += 10;
+			CC2500_WriteReg(CC2500_0C_FSCTRL0, FRSKY_RX_finetune);
+			FRSKY_RX_strobe_rx();
 			return 18000;
 
 		case FRSKY_RX_TUNE_LOW:
@@ -428,18 +452,18 @@ uint16_t FrSky_Rx_callback()
 			{
 				CC2500_ReadData(packet, len);
 				if(frskyx_rx_check_crc_id(true,false)) {
-					tune_low = frsky_rx_finetune;
-					frsky_rx_finetune = 127;
-					CC2500_WriteReg(CC2500_0C_FSCTRL0, frsky_rx_finetune);
+					tune_low = FRSKY_RX_finetune;
+					FRSKY_RX_finetune = 127;
+					CC2500_WriteReg(CC2500_0C_FSCTRL0, FRSKY_RX_finetune);
 					phase = FRSKY_RX_TUNE_HIGH;
 					debugln("FRSKY_RX_TUNE_HIGH");
-					frsky_rx_strobe_rx();
+					FRSKY_RX_strobe_rx();
 					return 1000;
 				}
 			}
-			frsky_rx_finetune += 1;
-			CC2500_WriteReg(CC2500_0C_FSCTRL0, frsky_rx_finetune);
-			frsky_rx_strobe_rx();
+			FRSKY_RX_finetune += 1;
+			CC2500_WriteReg(CC2500_0C_FSCTRL0, FRSKY_RX_finetune);
+			FRSKY_RX_strobe_rx();
 			return 18000;
 
 		case FRSKY_RX_TUNE_HIGH:
@@ -447,9 +471,9 @@ uint16_t FrSky_Rx_callback()
 			{
 				CC2500_ReadData(packet, len);
 				if(frskyx_rx_check_crc_id(true,false)) {
-					tune_high = frsky_rx_finetune;
-					frsky_rx_finetune = (tune_low + tune_high) / 2;
-					CC2500_WriteReg(CC2500_0C_FSCTRL0, (int8_t)frsky_rx_finetune);
+					tune_high = FRSKY_RX_finetune;
+					FRSKY_RX_finetune = (tune_low + tune_high) / 2;
+					CC2500_WriteReg(CC2500_0C_FSCTRL0, (int8_t)FRSKY_RX_finetune);
 					if(tune_low < tune_high)
 					{
 						phase = FRSKY_RX_BIND;
@@ -460,13 +484,13 @@ uint16_t FrSky_Rx_callback()
 						phase = FRSKY_RX_TUNE_START;
 						debugln("FRSKY_RX_TUNE_START");
 					}
-					frsky_rx_strobe_rx();
+					FRSKY_RX_strobe_rx();
 					return 1000;
 				}
 			}
-			frsky_rx_finetune -= 1;
-			CC2500_WriteReg(CC2500_0C_FSCTRL0, frsky_rx_finetune);
-			frsky_rx_strobe_rx();
+			FRSKY_RX_finetune -= 1;
+			CC2500_WriteReg(CC2500_0C_FSCTRL0, FRSKY_RX_finetune);
+			FRSKY_RX_strobe_rx();
 			return 18000;
 
 		case FRSKY_RX_BIND:
@@ -474,7 +498,7 @@ uint16_t FrSky_Rx_callback()
 			{
 				CC2500_ReadData(packet, len);
 				if(frskyx_rx_check_crc_id(true,false)) {
-					if(frsky_rx_format != FRSKY_RX_D16v2LBT && frsky_rx_format != FRSKY_RX_D16v2FCC)
+					if(FRSKY_RX_format != FRSKY_RX_D16v2LBT && FRSKY_RX_format != FRSKY_RX_D16v2FCC)
 					{// D8 & D16v1
 						if(packet[5] <= 0x2D)
 						{
@@ -484,7 +508,7 @@ uint16_t FrSky_Rx_callback()
 						}
 					}
 					else
-						state=0x3FF; //No hop table for D16v2
+						state = 0x3FF; //No hop table for D16v2
 					if (state == 0x3FF)
 					{
 						debugln("Bind complete");
@@ -493,27 +517,27 @@ uint16_t FrSky_Rx_callback()
 						uint16_t temp = FRSKY_RX_EEPROM_OFFSET;
 						if(sub_protocol==FRSKY_CLONE)
 						{
-							if(frsky_rx_format==FRSKY_RX_D8)
+							if(FRSKY_RX_format==FRSKY_RX_D8)
 								temp=FRSKYD_CLONE_EEPROM_OFFSET;
-							else if(frsky_rx_format == FRSKY_RX_D16FCC || frsky_rx_format == FRSKY_RX_D16LBT)
+							else if(FRSKY_RX_format == FRSKY_RX_D16FCC || FRSKY_RX_format == FRSKY_RX_D16LBT)
 								temp=FRSKYX_CLONE_EEPROM_OFFSET;
 							else
 								temp=FRSKYX2_CLONE_EEPROM_OFFSET;
 						}
-						eeprom_write_byte((EE_ADDR)temp++, frsky_rx_format);
+						eeprom_write_byte((EE_ADDR)temp++, FRSKY_RX_format);
 						eeprom_write_byte((EE_ADDR)temp++, rx_tx_addr[3]);
 						eeprom_write_byte((EE_ADDR)temp++, rx_tx_addr[2]);
 						eeprom_write_byte((EE_ADDR)temp++, rx_tx_addr[1]);
-						if(sub_protocol==FRSKY_RX)
-							eeprom_write_byte((EE_ADDR)temp++, frsky_rx_finetune);
-						if(frsky_rx_format != FRSKY_RX_D16v2FCC && frsky_rx_format != FRSKY_RX_D16v2LBT)
+						if(sub_protocol == FRSKY_RX || sub_protocol == FRSKY_CPPM)	// FRSKY_RX, FRSKY_CPPM
+							eeprom_write_byte((EE_ADDR)temp++, FRSKY_RX_finetune);
+						if(FRSKY_RX_format != FRSKY_RX_D16v2FCC && FRSKY_RX_format != FRSKY_RX_D16v2LBT)
 							for (ch = 0; ch < 47; ch++)
 								eeprom_write_byte((EE_ADDR)temp++, hopping_frequency[ch]);
-						frsky_rx_data();
+						FRSKY_RX_data();
 						debugln("FRSKY_RX_DATA");
 					}
 				}
-				frsky_rx_strobe_rx();
+				FRSKY_RX_strobe_rx();
 			}
 			return 1000;
 
@@ -530,31 +554,35 @@ uint16_t FrSky_Rx_callback()
 						RX_RSSI += 128;
 					bool chanskip_valid=true;
 					// hop to next channel
-					if (frsky_rx_format != FRSKY_RX_D8)
+					if (FRSKY_RX_format != FRSKY_RX_D8)
 					{//D16v1 & D16v2
 						if(rx_data_started)
 						{
-							if(frsky_rx_chanskip != (((packet[4] & 0xC0) >> 6) | ((packet[5] & 0x3F) << 2)))
+							if(FRSKY_RX_chanskip != (((packet[4] & 0xC0) >> 6) | ((packet[5] & 0x3F) << 2)))
 							{
 								chanskip_valid=false;	// chanskip value has changed which surely indicates a bad frame
 								packet_count++;
 								if(packet_count>5)		// the TX must have changed chanskip...
-									frsky_rx_chanskip = ((packet[4] & 0xC0) >> 6) | ((packet[5] & 0x3F) << 2);	// chanskip init
+									FRSKY_RX_chanskip = ((packet[4] & 0xC0) >> 6) | ((packet[5] & 0x3F) << 2);	// chanskip init
 							}
 							else
 								packet_count=0;
 						}
 						else
-							frsky_rx_chanskip = ((packet[4] & 0xC0) >> 6) | ((packet[5] & 0x3F) << 2);	// chanskip init
+							FRSKY_RX_chanskip = ((packet[4] & 0xC0) >> 6) | ((packet[5] & 0x3F) << 2);	// chanskip init
 					}
-					hopping_frequency_no = (hopping_frequency_no + frsky_rx_chanskip) % 47;
-					frsky_rx_set_channel(hopping_frequency_no);
+					hopping_frequency_no = (hopping_frequency_no + FRSKY_RX_chanskip) % 47;
+					FRSKY_RX_set_channel(hopping_frequency_no);
 					if(chanskip_valid)
 					{
-						if (telemetry_link == 0)
+						if ((telemetry_link & 0x7F) == 0)
 						{ // send channels to TX
-							frsky_rx_build_telemetry_packet();
+							FRSKY_RX_build_telemetry_packet();
 							telemetry_link = 1;
+							#ifdef SEND_CPPM
+								if(sub_protocol == FRSKY_CPPM)
+									telemetry_link |= 0x80;		// Disable telemetry output
+							#endif
 						}
 						pps_counter++;
 					}
@@ -578,8 +606,8 @@ uint16_t FrSky_Rx_callback()
 
 			// skip channel if no packet received in time
 			if (read_retry++ >= 9) {
-				hopping_frequency_no = (hopping_frequency_no + frsky_rx_chanskip) % 47;
-				frsky_rx_set_channel(hopping_frequency_no);
+				hopping_frequency_no = (hopping_frequency_no + FRSKY_RX_chanskip) % 47;
+				FRSKY_RX_set_channel(hopping_frequency_no);
 				if(rx_data_started)
 					read_retry = 0;
 				else

Multiprotocol/Futaba_cc2500.ino

@@ -14,10 +14,12 @@
  */
 // Last sync with main deviation/sfhss_cc2500.c dated 2016-03-23
 
-#if defined(SFHSS_CC2500_INO)
+#if defined(FUTABA_CC2500_INO)
 
 #include "iface_cc2500.h"
 
+//#define SFHSS_DEBUG_TIMING
+
 #define SFHSS_COARSE	0
 
 #define SFHSS_PACKET_LEN 13
@@ -79,7 +81,6 @@ static void __attribute__((unused)) SFHSS_rf_init()
 	for (uint8_t i = 0; i < 39; ++i)
 		CC2500_WriteReg(i, pgm_read_byte_near(&SFHSS_init_values[i]));
 
-	prev_option = option;
 	CC2500_WriteReg(CC2500_0C_FSCTRL0, option);
 	
 	CC2500_SetTxRxMode(TX_EN);
@@ -125,7 +126,7 @@ static void __attribute__((unused)) SFHSS_calc_next_chan()
 // Channel values are 12-bit values between 1020 and 2020, 1520 is the middle.
 // Futaba @140% is 2070...1520...970
 // Values grow down and to the right.
-static void __attribute__((unused)) SFHSS_build_data_packet()
+static void __attribute__((unused)) SFHSS_send_packet()
 {
 	uint16_t ch[4];
 	// command.bit0 is the packet number indicator: =0 -> SFHSS_DATA1, =1 -> SFHSS_DATA2
@@ -165,16 +166,14 @@ static void __attribute__((unused)) SFHSS_build_data_packet()
 			//    3584-4095 -> looks to be used for the throttle channel with values ranging from 880µs to 1520µs
 			for(uint8_t i=0;i<4;i++)
 			{
-				ch[i]=Failsafe_data[CH_AETR[ch_offset+i]];
-				if(ch[i]==FAILSAFE_CHANNEL_HOLD)
+				uint16_t val=Failsafe_data[CH_AETR[ch_offset+i]];
+				if(val==FAILSAFE_CHANNEL_HOLD)
 					ch[i]=1024;
-				else if(ch[i]==FAILSAFE_CHANNEL_NOPULSES)
+				else if(val==FAILSAFE_CHANNEL_NOPULSES)
 					ch[i]=0;
 				else
 				{ //Use channel value
-					ch[i]=(ch[i]>>1)+2560;
-					//if(IS_DISABLE_CH_MAP_off && ch_offset+i==CH3 && ch[i]<3072)		// Throttle
-					//	ch[i]+=1024;
+					ch[i] = convert_channel_16b_nolimit(CH_AETR[ch_offset+i],3571,2571,true); //3472,2672: not enough throw
 				}
 			}
 		}
@@ -182,7 +181,7 @@ static void __attribute__((unused)) SFHSS_build_data_packet()
 	#endif
 		{	//Normal data
 			for(uint8_t i=0;i<4;i++)
-				ch[i] = convert_channel_16b_nolimit(CH_AETR[ch_offset+i],2020,1020);
+				ch[i] = convert_channel_16b_nolimit(CH_AETR[ch_offset+i],2020,1020,false);
 		}
 
 	
@@ -203,15 +202,17 @@ static void __attribute__((unused)) SFHSS_build_data_packet()
 	packet[10] = (ch[2] << 7) | ((ch[3] >> 5) & 0x7F );
 	packet[11] = (ch[3] << 3) | ((fhss_code >> 2) & 0x07 );
 	packet[12] = (fhss_code << 6) | command;
-}
 
-static void __attribute__((unused)) SFHSS_send_packet()
-{
     CC2500_WriteData(packet, SFHSS_PACKET_LEN);
 }
 
-uint16_t ReadSFHSS()
+uint16_t SFHSS_callback()
 {
+#ifdef SFHSS_DEBUG_TIMING
+	static uint16_t prev_adjust_timing=1024;
+	uint16_t adjust_timing = (Channel_data[CH15]>>3) - (1024>>3);	// +-102 @ 100%
+#endif
+
 	switch(phase)
 	{
 		case SFHSS_START:
@@ -238,16 +239,27 @@ uint16_t ReadSFHSS()
 			#ifdef MULTI_SYNC
 				telemetry_set_input_sync(6800);
 			#endif
-			SFHSS_build_data_packet();
 			SFHSS_send_packet();
 			phase = SFHSS_DATA2;
+#ifdef SFHSS_DEBUG_TIMING
+			return SFHSS_DATA2_TIMING - adjust_timing;
+#else
 			return SFHSS_DATA2_TIMING;								// original 1650
+#endif
 		case SFHSS_DATA2:
-			SFHSS_build_data_packet();
 			SFHSS_send_packet();
 			SFHSS_calc_next_chan();
 			phase = SFHSS_TUNE;
-			return (SFHSS_PACKET_PERIOD -2000 -SFHSS_DATA2_TIMING);	// original 2000
+#ifdef SFHSS_DEBUG_TIMING
+			if(prev_adjust_timing != adjust_timing)
+			{
+				debugln("A:%d",(uint16_t)(SFHSS_DATA2_TIMING - adjust_timing));
+				prev_adjust_timing = adjust_timing;
+			}
+			return SFHSS_PACKET_PERIOD -2000 -(SFHSS_DATA2_TIMING - adjust_timing);
+#else
+			return SFHSS_PACKET_PERIOD -2000 -SFHSS_DATA2_TIMING;	// original 2000
+#endif
 		case SFHSS_TUNE:
 			phase = SFHSS_DATA1;
 			SFHSS_tune_freq();
@@ -288,7 +300,7 @@ static void __attribute__((unused)) SFHSS_get_tx_id()
 	rx_tx_addr[1] = fixed_id >> 0;
 }
 
-uint16_t initSFHSS()
+void SFHSS_init()
 {
 	BIND_DONE;	// Not a TX bind protocol
 	SFHSS_get_tx_id();
@@ -297,7 +309,6 @@ uint16_t initSFHSS()
 
 	SFHSS_rf_init();
 	phase = SFHSS_START;
-	return 10000;
 }
 
 #endif

Multiprotocol/GD00X_ccnrf.ino

@@ -14,9 +14,9 @@ Multiprotocol is distributed in the hope that it will be useful,
  */
 // Compatible with GD005 C-17 and GD006 DA62 planes.
 
-#if defined(GD00X_NRF24L01_INO)
+#if defined(GD00X_CCNRF_INO)
 
-#include "iface_nrf250k.h"
+#include "iface_xn297.h"
 
 //#define FORCE_GD00X_ORIGINAL_ID
 
@@ -113,7 +113,7 @@ static void __attribute__((unused)) GD00X_send_packet()
 
 	if(IS_BIND_DONE)
 	{
-		XN297L_Hopping(hopping_frequency_no);
+		XN297_Hopping(hopping_frequency_no);
 		if(sub_protocol==GD_V1)
 		{
 			hopping_frequency_no++;
@@ -121,21 +121,22 @@ static void __attribute__((unused)) GD00X_send_packet()
 		}
 	}
 
-	XN297L_WritePayload(packet, packet_length);
-
-	XN297L_SetPower();		// Set tx_power
-	XN297L_SetFreqOffset();	// Set frequency offset
+	// Send
+	XN297_SetFreqOffset();
+	XN297_SetPower();
+	XN297_SetTxRxMode(TX_EN);
+	XN297_WritePayload(packet, packet_length);
 }
 
-static void __attribute__((unused)) GD00X_init()
+static void __attribute__((unused)) GD00X_RF_init()
 {
-	XN297L_Init();
+	XN297_Configure(XN297_CRCEN, XN297_SCRAMBLED, XN297_250K);
 	if(sub_protocol==GD_V1)
-		XN297L_SetTXAddr((uint8_t*)"\xcc\xcc\xcc\xcc\xcc", 5);
+		XN297_SetTXAddr((uint8_t*)"\xcc\xcc\xcc\xcc\xcc", 5);
 	else
-		XN297L_SetTXAddr((uint8_t*)"GDKNx", 5);
-	XN297L_HoppingCalib(sub_protocol==GD_V1?GD00X_RF_NUM_CHANNELS:GD00X_V2_RF_NUM_CHANNELS);	// Calibrate all channels
-	XN297L_RFChannel(sub_protocol==GD_V1?GD00X_RF_BIND_CHANNEL:GD00X_V2_RF_BIND_CHANNEL);		// Set bind channel
+		XN297_SetTXAddr((uint8_t*)"GDKNx", 5);
+	XN297_HoppingCalib(sub_protocol==GD_V1?GD00X_RF_NUM_CHANNELS:GD00X_V2_RF_NUM_CHANNELS);	// Calibrate all channels
+	XN297_RFChannel(sub_protocol==GD_V1?GD00X_RF_BIND_CHANNEL:GD00X_V2_RF_BIND_CHANNEL);		// Set bind channel
 }
 
 static void __attribute__((unused)) GD00X_initialize_txid()
@@ -204,28 +205,27 @@ static void __attribute__((unused)) GD00X_initialize_txid()
 
 uint16_t GD00X_callback()
 {
-	if(IS_BIND_IN_PROGRESS)
-		if(--bind_counter==0)
-			BIND_DONE;
-	GD00X_send_packet();
 	#ifdef MULTI_SYNC
 		telemetry_set_input_sync(packet_period);
 	#endif
+	if(bind_counter)
+		if(--bind_counter==0)
+			BIND_DONE;
+	GD00X_send_packet();
 	return packet_period;
 }
 
-uint16_t initGD00X()
+void GD00X_init()
 {
 	BIND_IN_PROGRESS;	// autobind protocol
 	GD00X_initialize_txid();
-	GD00X_init();
+	GD00X_RF_init();
 	hopping_frequency_no = 0;
 	bind_counter=GD00X_BIND_COUNT;
 	packet_period=sub_protocol==GD_V1?GD00X_PACKET_PERIOD:GD00X_V2_BIND_PACKET_PERIOD;
 	packet_length=sub_protocol==GD_V1?GD00X_PAYLOAD_SIZE:GD00X_V2_PAYLOAD_SIZE;
 	packet_count=0;
 	len=0;
-	return GD00X_INITIAL_WAIT;
 }
 
 #endif

Multiprotocol/GW008_nrf24l01.ino

@@ -19,7 +19,7 @@ Multiprotocol is distributed in the hope that it will be useful,
 
 #if defined(GW008_NRF24L01_INO)
 
-#include "iface_nrf24l01.h"
+#include "iface_xn297.h"
 
 #define GW008_INITIAL_WAIT    500
 #define GW008_PACKET_PERIOD   2400
@@ -32,10 +32,10 @@ enum {
 	GW008_DATA
 };
 
-static void __attribute__((unused)) GW008_send_packet(uint8_t bind)
+static void __attribute__((unused)) GW008_send_packet()
 {
 	packet[0] = rx_tx_addr[0];
-	if(bind)
+	if(IS_BIND_IN_PROGRESS)
 	{
 		packet[1] = 0x55;
 		packet[2] = hopping_frequency[0];
@@ -47,6 +47,9 @@ static void __attribute__((unused)) GW008_send_packet(uint8_t bind)
 	}
 	else
 	{
+		XN297_Hopping((hopping_frequency_no++)/2);
+		hopping_frequency_no %= 8;
+
 		packet[1] = 0x01 | GET_FLAG(CH5_SW, 0x40); // flip
 		packet[2] = convert_channel_16b_limit(AILERON , 200, 0); // aileron
 		packet[3] = convert_channel_16b_limit(ELEVATOR, 0, 200); // elevator
@@ -63,38 +66,21 @@ static void __attribute__((unused)) GW008_send_packet(uint8_t bind)
 	}
 	packet[14] = rx_tx_addr[1];
 
-	// Power on, TX mode, CRC enabled
-	XN297_Configure(_BV(NRF24L01_00_EN_CRC) | _BV(NRF24L01_00_CRCO) | _BV(NRF24L01_00_PWR_UP));
-	NRF24L01_WriteReg(NRF24L01_05_RF_CH, bind ? GW008_RF_BIND_CHANNEL : hopping_frequency[(hopping_frequency_no++)/2]);
-	hopping_frequency_no %= 8;
-
-	NRF24L01_WriteReg(NRF24L01_07_STATUS, 0x70);
-	NRF24L01_FlushTx();
+	// Send
+	XN297_SetPower();
+	XN297_SetTxRxMode(TX_EN);
 	XN297_WriteEnhancedPayload(packet, GW008_PAYLOAD_SIZE, 0);
-
-	NRF24L01_SetPower();	// Set tx_power
 }
 
-static void __attribute__((unused)) GW008_init()
+static void __attribute__((unused)) GW008_RF_init()
 {
-	NRF24L01_Initialize();
-	NRF24L01_SetTxRxMode(TX_EN);
+	XN297_Configure(XN297_CRCEN, XN297_SCRAMBLED, XN297_1M);
+	
 	XN297_SetTXAddr((uint8_t*)"\xcc\xcc\xcc\xcc\xcc", 5);
-	XN297_SetRXAddr((uint8_t*)"\xcc\xcc\xcc\xcc\xcc", 5);
-	NRF24L01_FlushTx();
-	NRF24L01_FlushRx();
-	NRF24L01_WriteReg(NRF24L01_07_STATUS, 0x70);     // Clear data ready, data sent, and retransmit
-	NRF24L01_WriteReg(NRF24L01_01_EN_AA, 0x00);      // No Auto Acknowldgement on all data pipes
-	NRF24L01_WriteReg(NRF24L01_02_EN_RXADDR, 0x01);
-	NRF24L01_WriteReg(NRF24L01_11_RX_PW_P0, GW008_PAYLOAD_SIZE+2); // payload + 2 bytes for pcf
-	NRF24L01_WriteReg(NRF24L01_03_SETUP_AW, 0x03);
-	NRF24L01_WriteReg(NRF24L01_04_SETUP_RETR, 0x00); // no retransmits
-	NRF24L01_SetBitrate(NRF24L01_BR_1M);
-	NRF24L01_SetPower();
-	NRF24L01_Activate(0x73);                         // Activate feature register
-	NRF24L01_WriteReg(NRF24L01_1C_DYNPD, 0x00);      // Disable dynamic payload length on all pipes
-	NRF24L01_WriteReg(NRF24L01_1D_FEATURE, 0x01);    // Set feature bits on
-	NRF24L01_Activate(0x73);
+	XN297_SetRXAddr((uint8_t*)"\xcc\xcc\xcc\xcc\xcc", GW008_PAYLOAD_SIZE);
+
+	//XN297_HoppingCalib(8);
+	XN297_RFChannel(GW008_RF_BIND_CHANNEL);
 }
 
 static void __attribute__((unused)) GW008_initialize_txid()
@@ -109,53 +95,48 @@ uint16_t GW008_callback()
 	switch(phase)
 	{
 		case GW008_BIND1:
-			if((NRF24L01_ReadReg(NRF24L01_07_STATUS) & _BV(NRF24L01_07_RX_DR)) &&	// RX fifo data ready
+			if(XN297_IsRX() &&	// RX fifo data ready
 				XN297_ReadEnhancedPayload(packet, GW008_PAYLOAD_SIZE) == GW008_PAYLOAD_SIZE &&	// check payload size
 				packet[0] == rx_tx_addr[0] && packet[14] == rx_tx_addr[1])			// check tx id
 			{
-				NRF24L01_SetTxRxMode(TXRX_OFF);
-				NRF24L01_SetTxRxMode(TX_EN);
+				XN297_SetTxRxMode(TXRX_OFF);
+				XN297_SetTxRxMode(TX_EN);
 				rx_tx_addr[2] = packet[13];
 				BIND_DONE;
 				phase = GW008_DATA;
 			}
 			else
 			{
-				NRF24L01_SetTxRxMode(TXRX_OFF);
-				NRF24L01_SetTxRxMode(TX_EN);
-				GW008_send_packet(1);
+				XN297_SetTxRxMode(TXRX_OFF);
+				XN297_SetTxRxMode(TX_EN);
+				GW008_send_packet();
 				phase = GW008_BIND2;
 				return 850; // minimum value 750 for STM32
 			}
 			break;
 		case GW008_BIND2:
 			// switch to RX mode
-			NRF24L01_SetTxRxMode(TXRX_OFF);
-			NRF24L01_FlushRx();
-			NRF24L01_SetTxRxMode(RX_EN);
-			XN297_Configure(_BV(NRF24L01_00_EN_CRC) | _BV(NRF24L01_00_CRCO) 
-						| _BV(NRF24L01_00_PWR_UP) | _BV(NRF24L01_00_PRIM_RX)); 
+			XN297_SetTxRxMode(TXRX_OFF);
+			XN297_SetTxRxMode(RX_EN);
 			phase = GW008_BIND1;
 			return 5000;
-			break;
 		case GW008_DATA:
 			#ifdef MULTI_SYNC
 				telemetry_set_input_sync(GW008_PACKET_PERIOD);
 			#endif
-			GW008_send_packet(0);
+			GW008_send_packet();
 			break;
 	}
 	return GW008_PACKET_PERIOD;
 }
 
-uint16_t initGW008()
+void GW008_init()
 {
 	BIND_IN_PROGRESS;	// autobind protocol
 	GW008_initialize_txid();
 	phase = GW008_BIND1;
-	GW008_init();
+	GW008_RF_init();
 	hopping_frequency_no = 0;
-	return GW008_INITIAL_WAIT;
 }
 
 #endif

Multiprotocol/H8_3D_nrf24l01.ino

@@ -19,7 +19,7 @@
 
 #if defined(H8_3D_NRF24L01_INO)
 
-#include "iface_nrf24l01.h"
+#include "iface_xn297.h"
 
 #define H8_3D_PACKET_PERIOD		1800
 #define H20H_PACKET_PERIOD		9340
@@ -50,7 +50,7 @@ enum H8_3D_FLAGS_2 {
     H8_3D_FLAG_CAM_UP     = 0x04,
 };
 
-static void __attribute__((unused)) H8_3D_send_packet(uint8_t bind)
+static void __attribute__((unused)) H8_3D_send_packet()
 {
 	if(sub_protocol==H20H)
 		packet[0] = 0x14;
@@ -63,7 +63,7 @@ static void __attribute__((unused)) H8_3D_send_packet(uint8_t bind)
 	packet[4] = rx_tx_addr[3];
 	packet[8] = rx_tx_addr[0]+rx_tx_addr[1]+rx_tx_addr[2]+rx_tx_addr[3]; // txid checksum
 	memset(&packet[9], 0, 10);
-	if (bind)
+	if (IS_BIND_IN_PROGRESS)
 	{    
 		packet[5] = 0x00;
 		packet[6] = 0x00;
@@ -122,18 +122,16 @@ static void __attribute__((unused)) H8_3D_send_packet(uint8_t bind)
 		sum += packet[i];
 	packet[19] = sum; // data checksum
 	
-	// Power on, TX mode, 2byte CRC
-	// Why CRC0? xn297 does not interpret it - either 16-bit CRC or nothing
-	XN297_Configure(_BV(NRF24L01_00_EN_CRC) | _BV(NRF24L01_00_CRCO) | _BV(NRF24L01_00_PWR_UP));
+	// RF channel
 	if(sub_protocol!=H20H)
 	{ // H8_3D, H20MINI, H30MINI
-		NRF24L01_WriteReg(NRF24L01_05_RF_CH, bind ? hopping_frequency[0] : hopping_frequency[hopping_frequency_no++]);
+		XN297_RFChannel(IS_BIND_IN_PROGRESS ? hopping_frequency[0] : hopping_frequency[hopping_frequency_no++]);
 		hopping_frequency_no %= H8_3D_RF_NUM_CHANNELS;
 	}
 	else
-	{ //H20H
-		NRF24L01_WriteReg(NRF24L01_05_RF_CH, bind ? H20H_BIND_RF : hopping_frequency[packet_count>>3]);  
-		if(!bind)
+	{ // H20H
+		XN297_RFChannel(IS_BIND_IN_PROGRESS ? H20H_BIND_RF : hopping_frequency[packet_count>>3]);  
+		if(IS_BIND_DONE)
 		{
 			packet_count++;
 			if(packet_count>15)
@@ -147,55 +145,39 @@ static void __attribute__((unused)) H8_3D_send_packet(uint8_t bind)
 		}
 	}
 	
-	// clear packet status bits and TX FIFO
-	NRF24L01_WriteReg(NRF24L01_07_STATUS, 0x70);
-	NRF24L01_FlushTx();
+	// Send
+	XN297_SetPower();
+	XN297_SetTxRxMode(TX_EN);
 	XN297_WritePayload(packet, H8_3D_PACKET_SIZE);
-
-	NRF24L01_SetPower();	// Set tx_power
 }
 
-static void __attribute__((unused)) H8_3D_init()
+static void __attribute__((unused)) H8_3D_RF_init()
 {
-    NRF24L01_Initialize();
-    NRF24L01_SetTxRxMode(TX_EN);
+	XN297_Configure(XN297_CRCEN, XN297_SCRAMBLED, XN297_1M);
+
 	if(sub_protocol==H20H)
 		XN297_SetTXAddr((uint8_t *)"\xEE\xDD\xCC\xBB\x11", 5);
 	else // H8_3D, H20MINI, H30MINI
 		XN297_SetTXAddr((uint8_t *)"\xC4\x57\x09\x65\x21", 5);
-
-    NRF24L01_FlushTx();
-    NRF24L01_FlushRx();
-    NRF24L01_WriteReg(NRF24L01_07_STATUS, 0x70);     // Clear data ready, data sent, and retransmit
-    NRF24L01_WriteReg(NRF24L01_01_EN_AA, 0x00);      // No Auto Acknowldgement on all data pipes
-    NRF24L01_WriteReg(NRF24L01_02_EN_RXADDR, 0x01);  // Enable data pipe 0 only
-    NRF24L01_WriteReg(NRF24L01_04_SETUP_RETR, 0x00); // no retransmits
-    NRF24L01_SetBitrate(NRF24L01_BR_1M);             // 1Mbps
-    NRF24L01_SetPower();
 }
 
 uint16_t H8_3D_callback()
 {
-	if(IS_BIND_DONE)
-	{
-		#ifdef MULTI_SYNC
-			telemetry_set_input_sync(packet_period);
-		#endif
-		H8_3D_send_packet(0);
-	}
-	else
+	if(bind_counter)
 	{
+		bind_counter--;
 		if (bind_counter == 0)
 		{
 			BIND_DONE;
 			packet_count=0;
 		}
-		else
-		{
-			H8_3D_send_packet(1);
-			bind_counter--;
-		}
 	}
+	#ifdef MULTI_SYNC
+	else
+		telemetry_set_input_sync(packet_period);
+	#endif
+
+	H8_3D_send_packet();
 	return	packet_period;
 }
 
@@ -238,12 +220,12 @@ static void __attribute__((unused)) H8_3D_initialize_txid()
 	}
 }
 
-uint16_t initH8_3D(void)
+void H8_3D_init(void)
 {
 	BIND_IN_PROGRESS;	// autobind protocol
     bind_counter = H8_3D_BIND_COUNT;
 	H8_3D_initialize_txid();
-	H8_3D_init();
+	H8_3D_RF_init();
 	switch(sub_protocol)
 	{
         case H8_3D:
@@ -257,7 +239,6 @@ uint16_t initH8_3D(void)
 			packet_period=H20MINI_PACKET_PERIOD;
 			break;
 	}
-	return	H8_3D_INITIAL_WAIT;
 }
 
 #endif

Multiprotocol/HOTT_cc2500.ino

@@ -86,7 +86,6 @@ static void __attribute__((unused)) HOTT_rf_init()
 	for (uint8_t i = 0; i < 39; ++i)
 		CC2500_WriteReg(i, pgm_read_byte_near(&HOTT_init_values[i]));
 
-	prev_option = option;
 	CC2500_WriteReg(CC2500_0C_FSCTRL0, option);
 	
 	CC2500_SetTxRxMode(TX_EN);
@@ -138,7 +137,7 @@ const uint8_t PROGMEM HOTT_hop[][HOTT_NUM_RF_CHANNELS]=
 		};
 const uint16_t PROGMEM HOTT_hop_val[] = { 0xC06B, 0xC34A, 0xDB24, 0x8E09, 0x272E, 0x217F, 0x155B, 0xEDE8, 0x1D31, 0x0986, 0x56F7, 0x6454, 0xC42D, 0x01D2, 0xC253, 0x1180 };
 
-static void __attribute__((unused)) HOTT_init()
+static void __attribute__((unused)) HOTT_TXID_init()
 {
 	packet[0] = pgm_read_word_near( &HOTT_hop_val[num_ch] );
 	packet[1] = pgm_read_word_near( &HOTT_hop_val[num_ch] )>>8;
@@ -159,7 +158,7 @@ static void __attribute__((unused)) HOTT_init()
 	else
 	{
 		memcpy(&packet[40],rx_tx_addr,5);
-		uint8_t addr=HOTT_EEPROM_OFFSET+RX_num*5;
+		uint16_t addr=HOTT_EEPROM_OFFSET+RX_num*5;
 		debug("RXID: ");
 		for(uint8_t i=0;i<5;i++)
 		{
@@ -172,10 +171,11 @@ static void __attribute__((unused)) HOTT_init()
 
 static void __attribute__((unused)) HOTT_prep_data_packet()
 {
+	static uint8_t upper=0;
 	
 	packet[2] = hopping_frequency_no;
 
-	packet[3] = 0x00;									// used for failsafe but may also be used for additional channels
+	packet[3] = upper;									// used for failsafe and upper channels (only supporting 16 channels)
 	#ifdef FAILSAFE_ENABLE
 		static uint8_t failsafe_count=0;
 		if(IS_FAILSAFE_VALUES_on && IS_BIND_DONE)
@@ -195,13 +195,16 @@ static void __attribute__((unused)) HOTT_prep_data_packet()
 	uint16_t val;
 	for(uint8_t i=4;i<28;i+=2)
 	{
-		val=Channel_data[(i-4)>>1];
+		uint8_t ch=(i-4)>>1;
+		if(upper && ch >= 8)
+			ch+=4;										// when upper swap CH9..CH12 by CH13..16
+		val=Channel_data[ch];
 		val=(((val<<2)+val)>>2)+860*2;					// value range 860<->2140 *2 <-> -125%<->+125%
 		#ifdef FAILSAFE_ENABLE
 			if(failsafe_count==1)
 			{ // first failsafe packet
-				packet[3]=0x40;
-				uint16_t fs=Failsafe_data[(i-4)>>1];
+				packet[3] |= 0x40;
+				uint16_t fs=Failsafe_data[ch];
 				if( fs == FAILSAFE_CHANNEL_HOLD || fs == FAILSAFE_CHANNEL_NOPULSES)
 					val|=0x8000;						// channel hold flag
 				else
@@ -212,7 +215,7 @@ static void __attribute__((unused)) HOTT_prep_data_packet()
 			}
 			else if(failsafe_count==2)
 			{ // second failsafe packet=timing?
-				packet[3]=0x50;
+				packet[3] |= 0x50;
 				if(i==4)
 					val=2;
 				else
@@ -222,6 +225,10 @@ static void __attribute__((unused)) HOTT_prep_data_packet()
 		packet[i] = val;
 		packet[i+1] = val>>8;
 	}
+	upper ^= 0x01;										// toggle between CH9..CH12 and CH13..16
+	
+	packet[28] = 0x80;									// no sensor
+	packet[29] = 0x02;									// 0x02 when bind starts then when RX replies cycle in sequence 0x1A/22/2A/0A/12, 0x02 during normal packets, 0x01->text config menu, 0x0A->no more RX telemetry
 	#ifdef HOTT_FW_TELEMETRY
 		if(IS_BIND_DONE)
 		{
@@ -239,25 +246,23 @@ static void __attribute__((unused)) HOTT_prep_data_packet()
 					}
 					else
 						packet[28] = HoTT_SerialRX_val | 0x0F;	// no button pressed
-					packet[29] = 0x01;							// 0x01->Text config menu
 				}
+				else
+					packet[28] = 0x0F;							// RX, no button pressed
+				if(sub_protocol == HOTT_SYNC)
+					packet[29] = ((HOTT_sensor_seq+1)<<3) | 1;	// Telemetry packet sequence
+				else
+					packet[29] = 0x01;							// 0x01->Text config menu
 			}
 			else
 			{
 				packet[28] = 0x89+HOTT_sensor_cur;				// 0x89/8A/8B/8C/8D/8E during normal packets
 				if(sub_protocol == HOTT_SYNC)
 					packet[29] = ((HOTT_sensor_seq+1)<<3) | 2;	// Telemetry packet sequence
-				else
-					packet[29] = 0x02;
-				//debugln("28=%02X,29=%02X",packet[28],packet[29]);
 			}
+			//debugln("28=%02X,29=%02X",packet[28],packet[29]);
 		}
-		else
 	#endif
-		{
-			packet[28] = 0x80;									// no sensor
-			packet[29] = 0x02;									// unknown 0x02 when bind starts then when RX replies cycle in sequence 0x1A/22/2A/0A/12, 0x02 during normal packets, 0x01->text config menu, 0x0A->no more RX telemetry
-		}
 
 	CC2500_WriteReg(CC2500_06_PKTLEN, HOTT_TX_PACKET_LEN);
 	CC2500_WriteRegisterMulti(CC2500_3F_TXFIFO, packet, HOTT_TX_PACKET_LEN);
@@ -272,12 +277,8 @@ static void __attribute__((unused)) HOTT_prep_data_packet()
 	rf_ch_num=hopping_frequency[hopping_frequency_no];
 }
 
-uint16_t ReadHOTT()
+uint16_t HOTT_callback()
 {
-	#ifdef HOTT_FW_TELEMETRY
-		static uint8_t pps_counter=0;
-	#endif
-
 	switch(phase)
 	{
 		case HOTT_START:
@@ -349,7 +350,7 @@ uint16_t ReadHOTT()
 			CC2500_Strobe(CC2500_SFRX);
 			//RX
 			if(packet[29] & 0xF8)
-			{// binary telemetry
+			{// Sync telemetry
 				CC2500_WriteReg(CC2500_04_SYNC1, 0x2C);
 				CC2500_WriteReg(CC2500_05_SYNC0, 0x6E);
 			}
@@ -378,11 +379,11 @@ uint16_t ReadHOTT()
 						for(uint8_t i=0;i<HOTT_RX_PACKET_LEN;i++)
 							debug(" %02X", packet_in[i]);
 						debugln("");
-						uint8_t addr=HOTT_EEPROM_OFFSET+RX_num*5;
+						uint16_t addr=HOTT_EEPROM_OFFSET+RX_num*5;
 						for(uint8_t i=0; i<5; i++)
 							eeprom_write_byte((EE_ADDR)(addr+i),packet_in[5+i]);
 						BIND_DONE;
-						HOTT_init();
+						HOTT_TXID_init();
 					}
 					#ifdef HOTT_FW_TELEMETRY
 						else
@@ -412,8 +413,10 @@ uint16_t ReadHOTT()
 							packet_in[0]= packet_in[HOTT_RX_PACKET_LEN];
 							packet_in[1]= TX_LQI;
 							bool send_telem=true;
-							if(packet[29]==1)
+							HOTT_sensor_seq++;											// Increment RX sequence counter
+							if(packet[29] & 1)
 							{ //Text mode
+								HOTT_sensor_seq %= 19;									// 19 pages in Text mode
 								HOTT_sensor_pages = 0;
 								HOTT_sensor_valid = false;
 								packet_in[10] = 0x80;									// Marking telem Text mode
@@ -423,7 +426,6 @@ uint16_t ReadHOTT()
 							}
 							else
 							{ //Binary sensor
-								HOTT_sensor_seq++;										// Increment RX sequence counter
 								HOTT_sensor_seq %= 5;									// 5 pages in binary mode per sensor
 								if(state==0 && HOTT_sensor_ok[0]==false && HOTT_sensor_ok[1]==false && HOTT_sensor_ok[2]==false && HOTT_sensor_ok[3]==false && HOTT_sensor_ok[4]==false && HOTT_sensor_ok[5]==false)
 									HOTT_sensor_seq=0;									// No sensors always ask page 0
@@ -508,10 +510,10 @@ uint16_t ReadHOTT()
 	return 0;
 }
 
-uint16_t initHOTT()
+void HOTT_init()
 {
 	num_ch=random(0xfefefefe)%16;
-	HOTT_init();
+	HOTT_TXID_init();
 	HOTT_rf_init();
 	#ifdef HOTT_FW_TELEMETRY
 		HoTT_SerialRX_val=0;
@@ -526,7 +528,6 @@ uint16_t initHOTT()
 		state=HOTT_SENSOR_SEARCH_PERIOD;
 	#endif
 	phase = HOTT_START;
-	return 10000;
 }
 
 #endif

Multiprotocol/Height_a7105.ino

@@ -14,16 +14,16 @@
  */
 // Compatible with FZ-410 TX
 
-#if defined(FLYZONE_A7105_INO)
+#if defined(HEIGHT_A7105_INO)
 
 #include "iface_a7105.h"
 
-//#define FLYZONE_FORCEID
+//#define HEIGHT_FORCEID
 
-#define FLYZONE_BIND_COUNT	220		// 5 sec
-#define FLYZONE_BIND_CH		0x18	// TX, RX for bind end is 0x17
+#define HEIGHT_BIND_COUNT	220		// 5 sec
+#define HEIGHT_BIND_CH		0x18	// TX, RX for bind end is 0x17
 
-static void __attribute__((unused)) flyzone_build_packet()
+static void __attribute__((unused)) HEIGHT_build_packet()
 {
     packet[0] = 0xA5;
     packet[1] = rx_tx_addr[2];
@@ -33,11 +33,17 @@ static void __attribute__((unused)) flyzone_build_packet()
 	packet[5] = convert_channel_8b(THROTTLE);	//00..FF
 	packet[6] = convert_channel_8b(RUDDER);		//00..80..FF
     packet[7] = convert_channel_8b(CH5);		//00..80..FF
+    if(sub_protocol == HEIGHT_8CH)
+	{
+		packet[8] = convert_channel_8b(CH6);	//00..80..FF
+		packet[9] = convert_channel_8b(CH7);	//00..80..FF
+		packet[10] = convert_channel_8b(CH8);	//00..80..FF
+	}
 }
 
-uint16_t ReadFlyzone()
+uint16_t HEIGHT_callback()
 {
-	#ifndef FORCE_FLYZONE_TUNING
+	#ifndef FORCE_HEIGHT_TUNING
 		A7105_AdjustLOBaseFreq(1);
 	#endif
 	if(IS_BIND_IN_PROGRESS)
@@ -45,7 +51,7 @@ uint16_t ReadFlyzone()
 		packet[0] = 0x1B;
 		packet[1] = rx_tx_addr[2];
 		packet[2] = rx_tx_addr[3];
-		A7105_WriteData(3, FLYZONE_BIND_CH);
+		A7105_WriteData(3, HEIGHT_BIND_CH);
 		if (bind_counter--==0)
 			BIND_DONE;
 		return 22700;
@@ -58,8 +64,8 @@ uint16_t ReadFlyzone()
 			#ifdef MULTI_SYNC
 				telemetry_set_input_sync(20*1500);
 			#endif
-			flyzone_build_packet();
-			A7105_WriteData(8, hopping_frequency[0]);
+			HEIGHT_build_packet();
+			A7105_WriteData(sub_protocol?11:8, hopping_frequency[0]);
 			A7105_SetPower();
 		}
 		else
@@ -72,14 +78,14 @@ uint16_t ReadFlyzone()
 	return 1500;
 }
 
-uint16_t initFlyzone()
+void HEIGHT_init()
 {
 	A7105_Init();
 
 	hopping_frequency[0]=((random(0xfefefefe) & 0x0F)+2)<<2;
 	hopping_frequency[1]=hopping_frequency[0]+0x50;
 	
-	#ifdef FLYZONE_FORCEID
+	#ifdef HEIGHT_FORCEID
 		rx_tx_addr[2]=0x35;
 		rx_tx_addr[3]=0xD0;
 		hopping_frequency[0]=0x18;
@@ -87,8 +93,7 @@ uint16_t initFlyzone()
 	#endif
 	
 	phase=255;
-	bind_counter = FLYZONE_BIND_COUNT;
-	return 2400;
+	bind_counter = HEIGHT_BIND_COUNT;
 }
 #endif
 // Normal packet is 8 bytes: 0xA5 0xAF 0x59 0x84 0x7A 0x00 0x80 0xFF

Multiprotocol/Hisky_nrf24l01.ino

@@ -24,44 +24,7 @@
 //
 uint8_t bind_buf_arry[4][10];
 
-// HiSky protocol uses TX id as an address for nRF24L01, and uses frequency hopping sequence
-// which does not depend on this id and is passed explicitly in binding sequence. So we are free
-// to generate this sequence as we wish. It should be in the range [02..77]
-static void __attribute__((unused)) calc_fh_channels()
-{
-	uint8_t idx = 0;
-	uint32_t rnd = MProtocol_id;
-
-	while (idx < HISKY_FREQUENCE_NUM)
-	{
-		uint8_t i;
-		uint8_t count_2_26 = 0, count_27_50 = 0, count_51_74 = 0;
-
-		rnd = rnd * 0x0019660D + 0x3C6EF35F; // Randomization
-		// Use least-significant byte. 73 is prime, so channels 76..77 are unused
-		uint8_t next_ch = ((rnd >> 8) % 73) + 2;
-		// Keep the distance 2 between the channels - either odd or even
-		if (((next_ch ^ (uint8_t)rx_tx_addr[3]) & 0x01 )== 0)
-			continue;
-		// Check that it's not duplicated and spread uniformly
-		for (i = 0; i < idx; i++) {
-			if(hopping_frequency[i] == next_ch)
-				break;
-			if(hopping_frequency[i] <= 26)
-				count_2_26++;
-			else if (hopping_frequency[i] <= 50)
-				count_27_50++;
-			else
-				count_51_74++;
-		}
-		if (i != idx)
-			continue;
-		if ( (next_ch <= 26 && count_2_26 < 8) || (next_ch >= 27 && next_ch <= 50 && count_27_50 < 8) || (next_ch >= 51 && count_51_74 < 8) )
-			hopping_frequency[idx++] = next_ch;//find hopping frequency
-	}
-}
-
-static void __attribute__((unused)) build_binding_packet(void)
+static void __attribute__((unused)) HISKY_build_binding_packet(void)
 {
 	uint8_t i;
 	uint16_t sum=0;
@@ -95,28 +58,21 @@ static void __attribute__((unused)) build_binding_packet(void)
 	}
 }
 
-static void __attribute__((unused)) hisky_init()
+static void __attribute__((unused)) HISKY_RF_init()
 {
 	NRF24L01_Initialize();
 
-	NRF24L01_WriteReg(NRF24L01_01_EN_AA, 0x00);			// No Auto Acknowledgement
-	NRF24L01_WriteReg(NRF24L01_02_EN_RXADDR, 0x01);		// Enable p0 rx
-	NRF24L01_WriteReg(NRF24L01_03_SETUP_AW, 0x03);		// 5-byte RX/TX address (byte -2)
 	NRF24L01_WriteReg(NRF24L01_05_RF_CH, 81);			// binding packet must be set in channel 81
 	NRF24L01_WriteRegisterMulti(NRF24L01_0A_RX_ADDR_P0, rx_tx_addr, 5);
 	NRF24L01_WriteRegisterMulti(NRF24L01_10_TX_ADDR, rx_tx_addr, 5);
 	NRF24L01_WriteReg(NRF24L01_11_RX_PW_P0, 10);		// payload size = 10
 	if(sub_protocol==HK310)
-		NRF24L01_SetBitrate(NRF24L01_BR_250K);				// 250Kbps
-	else
-		NRF24L01_SetBitrate(NRF24L01_BR_1M);				// 1Mbps
-	NRF24L01_SetPower();								// Set power
-	NRF24L01_SetTxRxMode(TX_EN);						// TX mode, 2-bytes CRC, radio on
+		NRF24L01_SetBitrate(NRF24L01_BR_250K);			// 250Kbps
 }
 
 // HiSky channel sequence: AILE  ELEV  THRO  RUDD  GEAR  PITCH, channel data value is from 0 to 1000
 // Channel 7 - Gyro mode, 0 - 6 axis, 3 - 3 axis 
-static void __attribute__((unused)) build_ch_data()
+static void __attribute__((unused)) HISKY_build_ch_data()
 {
 	uint16_t temp;
 	uint8_t i,j;
@@ -133,7 +89,7 @@ static void __attribute__((unused)) build_ch_data()
 	}
 }
 
-uint16_t hisky_cb()
+uint16_t HISKY_callback()
 {
 	phase++;
 	if(sub_protocol==HK310)
@@ -223,7 +179,7 @@ uint16_t hisky_cb()
 			#ifdef MULTI_SYNC
 				telemetry_set_input_sync(9000);
 			#endif
-			build_ch_data();
+			HISKY_build_ch_data();
 			break;
 		case 8:
 			break;
@@ -236,7 +192,7 @@ uint16_t hisky_cb()
 	return 1000;  // send 1 binding packet and 1 data packet per 9ms	
 }
 
-static void __attribute__((unused)) initialize_tx_id()
+static void __attribute__((unused)) HISKY_initialize_tx_id()
 {
 	//Generate frequency hopping table	
 	if(sub_protocol==HK310)
@@ -248,14 +204,17 @@ static void __attribute__((unused)) initialize_tx_id()
 			hopping_frequency[i]=hopping_frequency_no++;	// Sequential order hop channels...
 	}
 	else
-		calc_fh_channels();
+		calc_fh_channels(HISKY_FREQUENCE_NUM);
+		// HiSky air protocol uses TX id as an address for nRF24L01, and uses frequency hopping sequence
+		// which does not depend on this id and is passed explicitly in binding sequence. So we are free
+		// to generate this sequence as we wish. It should be in the range [02..77]
 }
 
-uint16_t initHiSky()
+void HISKY_init()
 {
-	initialize_tx_id();
-	build_binding_packet();
-	hisky_init();
+	HISKY_initialize_tx_id();
+	HISKY_build_binding_packet();
+	HISKY_RF_init();
 	phase = 0;
 	hopping_frequency_no = 0;
 	binding_idx = 0;
@@ -264,7 +223,6 @@ uint16_t initHiSky()
 		bind_counter = HISKY_BIND_COUNT;
 	else 
 		bind_counter = 0;
-	return 1000;
 }
 
 #endif

Multiprotocol/Hitec_cc2500.ino

@@ -54,9 +54,9 @@ static void __attribute__((unused)) HITEC_CC2500_init()
 	for (uint8_t i = 0; i < 39; ++i)
 		CC2500_WriteReg(i, pgm_read_byte_near(&HITEC_init_values[i]));
 
-	prev_option = option;
 	CC2500_WriteReg(CC2500_0C_FSCTRL0, option);
-	
+	prev_option = option;
+
 	CC2500_SetTxRxMode(TX_EN);
 	CC2500_SetPower();
 }
@@ -165,7 +165,7 @@ static void __attribute__((unused)) HITEC_build_packet()
 		packet[0] = 0x1A;		// 26 bytes to follow
 		for(uint8_t i=0;i<9;i++)
 		{
-			uint16_t ch = convert_channel_16b_nolimit(i,0x1B87,0x3905);
+			uint16_t ch = convert_channel_16b_nolimit(i,0x1B87,0x3905,false);
 			packet[4+2*i] = ch >> 8;
 			packet[5+2*i] = ch & 0xFF;
 		}
@@ -220,7 +220,7 @@ static void __attribute__((unused)) HITEC_send_packet()
 		packet[23] >>= 1;	// packet sequence
 }
 
-uint16_t ReadHITEC()
+uint16_t HITEC_callback()
 {
 	switch(phase)
 	{
@@ -390,7 +390,7 @@ uint16_t ReadHITEC()
 	return 0;
 }
 
-uint16_t initHITEC()
+void HITEC_init()
 {
 	HITEC_RF_channels();
 	#ifdef HITEC_FORCE_ID	// ID and channels taken from dump
@@ -400,7 +400,6 @@ uint16_t initHITEC()
 		memcpy((void *)hopping_frequency,(void *)"\x00\x3A\x4A\x32\x0C\x58\x2A\x10\x26\x20\x08\x60\x68\x70\x78\x80\x88\x56\x5E\x66\x6E",HITEC_NUM_FREQUENCE);
 	#endif
 	phase = HITEC_START;
-	return 10000;
 }
 
 /* Full telemetry 

Multiprotocol/Hontai_nrf24l01.ino

@@ -15,7 +15,7 @@
 
 #if defined(HONTAI_NRF24L01_INO)
 
-#include "iface_nrf24l01.h"
+#include "iface_xn297.h"	// mix of nrf and xn297 at 1Mb...
 
 #define HONTAI_BIND_COUNT 80
 #define HONTAI_PACKET_PERIOD    13500
@@ -34,40 +34,21 @@ enum{
     HONTAI_FLAG_CALIBRATE = 0x20,
 };
 
-// proudly swiped from http://www.drdobbs.com/implementing-the-ccitt-cyclical-redundan/199904926
-#define HONTAI_POLY 0x8408
-static void __attribute__((unused)) crc16(uint8_t *data_p, uint8_t length)
+static void __attribute__((unused)) HONTAI_send_packet()
 {
-	uint16_t crc = 0xffff;
-
-	length -= 2;
-	do
-	{
-		for (uint8_t i = 0, data = (uint8_t)*data_p++;
-		i < 8;
-		i++, data >>= 1)
-		{
-			if ((crc & 0x01) ^ (data & 0x01))
-				crc = (crc >> 1) ^ HONTAI_POLY;
-			else
-				crc >>= 1;
-		}
-	} while (--length);
-
-	crc = ~crc;
-	*data_p++ = crc & 0xff;
-	*data_p   = crc >> 8;
-}
-
-static void __attribute__((unused)) HONTAI_send_packet(uint8_t bind)
-{
-	if (bind)
+	if (IS_BIND_IN_PROGRESS)
 	{
 		memcpy(packet, rx_tx_addr, 5);
 		memset(&packet[5], 0, 3);
+		packet_length = HONTAI_BIND_PACKET_SIZE;
 	}
 	else
 	{
+		/*if(sub_protocol == JJRCX1)
+			NRF24L01_WriteReg(NRF24L01_05_RF_CH, hopping_frequency[hopping_frequency_no++]);
+		else*/
+			XN297_Hopping(hopping_frequency_no++);
+		hopping_frequency_no %= 3;
 		memset(packet,0,HONTAI_PACKET_SIZE);
 		packet[3] = convert_channel_16b_limit(THROTTLE, 0, 127) << 1;	// Throttle
 		packet[4] = convert_channel_16b_limit(AILERON, 63, 0);			// Aileron
@@ -125,60 +106,56 @@ static void __attribute__((unused)) HONTAI_send_packet(uint8_t bind)
 				packet[6] |= GET_FLAG(CH9_SW, 0x40);				// Headless
 				break;
 		}
+		packet_length = HONTAI_PACKET_SIZE;
 	}
-	crc16(packet, bind ? HONTAI_BIND_PACKET_SIZE:HONTAI_PACKET_SIZE);
+
+	// CRC 16 bits reflected in and out
+	crc=0xFFFF;
+	for(uint8_t i=0; i< packet_length-2; i++)
+		crc16_update(bit_reverse(packet[i]),8);
+	crc ^= 0xFFFF;
+	packet[packet_length-2]=bit_reverse(crc>>8);
+	packet[packet_length-1]=bit_reverse(crc);
 
 	// Power on, TX mode, 2byte CRC
-	if(sub_protocol == JJRCX1)
+	/*if(sub_protocol == JJRCX1)
+	{
+		NRF24L01_SetPower();
 		NRF24L01_SetTxRxMode(TX_EN);
-	else
-		XN297_Configure(_BV(NRF24L01_00_EN_CRC) | _BV(NRF24L01_00_CRCO) | _BV(NRF24L01_00_PWR_UP));
-
-	NRF24L01_WriteReg(NRF24L01_05_RF_CH, bind ? HONTAI_RF_BIND_CHANNEL : hopping_frequency[hopping_frequency_no++]);
-	hopping_frequency_no %= 3;
-
-	NRF24L01_WriteReg(NRF24L01_07_STATUS, 0x70);
-	NRF24L01_FlushTx();
+		NRF24L01_WriteReg(NRF24L01_07_STATUS, 0x70);
+		NRF24L01_FlushTx();
+	}
+	else*/
+	{
+		XN297_SetPower();
+		XN297_SetTxRxMode(TX_EN);
+	}
 
 	if(sub_protocol == JJRCX1)
-		NRF24L01_WritePayload(packet, bind ? HONTAI_BIND_PACKET_SIZE:HONTAI_PACKET_SIZE);
+		NRF24L01_WritePayload(packet, packet_length);
 	else
-		XN297_WritePayload(packet, bind ? HONTAI_BIND_PACKET_SIZE:HONTAI_PACKET_SIZE);
-
-	NRF24L01_SetPower();
+		XN297_WritePayload(packet, packet_length);
 }
 
-static void __attribute__((unused)) HONTAI_init()
+static void __attribute__((unused)) HONTAI_RF_init()
 {
-	NRF24L01_Initialize();
 
-	NRF24L01_SetTxRxMode(TX_EN);
-
-	if(sub_protocol == JJRCX1)
-		NRF24L01_WriteRegisterMulti(NRF24L01_10_TX_ADDR, (uint8_t*)"\xd2\xb5\x99\xb3\x4a", 5);
-	else
-		XN297_SetTXAddr((const uint8_t*)"\xd2\xb5\x99\xb3\x4a", 5);
-
-	NRF24L01_FlushTx();
-	NRF24L01_FlushRx();
-	NRF24L01_WriteReg(NRF24L01_07_STATUS, 0x70);			// Clear data ready, data sent, and retransmit
-	NRF24L01_WriteReg(NRF24L01_01_EN_AA, 0x00);				// No Auto Acknowldgement on all data pipes
-	NRF24L01_SetBitrate(NRF24L01_BR_1M);					// 1Mbps
-	NRF24L01_SetPower();
-	NRF24L01_Activate(0x73);								// Activate feature register
+	XN297_Configure(XN297_CRCEN, XN297_SCRAMBLED, XN297_1M);	// this will select the nrf and initialize it, therefore both sub protocols can use common instructions
 	if(sub_protocol == JJRCX1)
 	{
+		//NRF24L01_Initialize();
+		NRF24L01_WriteRegisterMulti(NRF24L01_10_TX_ADDR, (uint8_t*)"\xd2\xb5\x99\xb3\x4a", 5);
 		NRF24L01_WriteReg(NRF24L01_04_SETUP_RETR, 0xff);	// JJRC uses dynamic payload length
 		NRF24L01_WriteReg(NRF24L01_1C_DYNPD, 0x3f);			// match other stock settings even though AA disabled...
 		NRF24L01_WriteReg(NRF24L01_1D_FEATURE, 0x07);
+		//NRF24L01_WriteReg(NRF24L01_05_RF_CH, HONTAI_RF_BIND_CHANNEL);
 	}
 	else
 	{
-		NRF24L01_WriteReg(NRF24L01_04_SETUP_RETR, 0x00);	// no retransmits
-		NRF24L01_WriteReg(NRF24L01_1C_DYNPD, 0x00);			// Disable dynamic payload length on all pipes
-		NRF24L01_WriteReg(NRF24L01_1D_FEATURE, 0x00);
+		XN297_SetTXAddr((const uint8_t*)"\xd2\xb5\x99\xb3\x4a", 5);
+		//XN297_HoppingCalib(3);
 	}
-	NRF24L01_Activate(0x73);								// Deactivate feature register
+	XN297_RFChannel(HONTAI_RF_BIND_CHANNEL);
 }
 
 const uint8_t PROGMEM HONTAI_hopping_frequency_nonels[][3] = {
@@ -202,9 +179,9 @@ static void __attribute__((unused)) HONTAI_init2()
 	data_tx_addr[3] = pgm_read_byte_near( &HONTAI_addr_vals[3][(rx_tx_addr[4] >> 4) & 0x0f]);
 	data_tx_addr[4] = 0x24;
 	if(sub_protocol == JJRCX1)
-		NRF24L01_WriteRegisterMulti(NRF24L01_10_TX_ADDR, data_tx_addr, sizeof(data_tx_addr));
+		NRF24L01_WriteRegisterMulti(NRF24L01_10_TX_ADDR, data_tx_addr, 5);
 	else
-		XN297_SetTXAddr(data_tx_addr, sizeof(data_tx_addr));
+		XN297_SetTXAddr(data_tx_addr, 5);
 
 	//Hopping frequency table
 	for(uint8_t i=0;i<3;i++)
@@ -231,9 +208,11 @@ static void __attribute__((unused)) HONTAI_initialize_txid()
 
 uint16_t HONTAI_callback()
 {
-	if(bind_counter!=0)
+	#ifdef MULTI_SYNC
+		telemetry_set_input_sync(packet_period);
+	#endif
+	if(bind_counter)
 	{
-		HONTAI_send_packet(1);
 		bind_counter--;
 		if (bind_counter == 0)
 		{
@@ -241,24 +220,16 @@ uint16_t HONTAI_callback()
 			BIND_DONE;
 		}
 	}
-	else
-	{
-		#ifdef MULTI_SYNC
-			telemetry_set_input_sync(packet_period);
-		#endif
-		HONTAI_send_packet(0);
-	}
-
+	HONTAI_send_packet();
 	return packet_period;
 }
 
-uint16_t initHONTAI()
+void HONTAI_init()
 {
 	BIND_IN_PROGRESS;	// autobind protocol
 	bind_counter = HONTAI_BIND_COUNT;
 	HONTAI_initialize_txid();
-	HONTAI_init();
+	HONTAI_RF_init();
 	packet_period = sub_protocol == FQ777_951 ? FQ777_951_PACKET_PERIOD : HONTAI_PACKET_PERIOD;
-	return HONTAI_INITIAL_WAIT;
 }
 #endif

Multiprotocol/Hubsan_a7105.ino

@@ -285,7 +285,7 @@ static uint8_t __attribute__((unused)) hubsan_check_integrity()
 }
 #endif
 
-uint16_t ReadHubsan() 
+uint16_t HUBSAN_callback() 
 {
 #ifdef HUBSAN_HUB_TELEMETRY
 	static uint8_t rfMode=0;
@@ -446,7 +446,7 @@ uint16_t ReadHubsan()
 	return 0;
 }
 
-uint16_t initHubsan()
+void HUBSAN_init()
 {
 	const uint8_t allowed_ch[] = {0x14, 0x1e, 0x28, 0x32, 0x3c, 0x46, 0x50, 0x5a, 0x64, 0x6e, 0x78, 0x82};
 	A7105_Init();
@@ -467,7 +467,6 @@ uint16_t initHubsan()
 	}
 	packet_count=0;
 	bind_phase=0;
-	return 10000;
 }
 
 #endif

Multiprotocol/IKEA_Ansluta_cc2500.ino

@@ -0,0 +1,122 @@
+/*
+ This project is free software: you can redistribute it and/or modify
+ it under the terms of the GNU General Public License as published by
+ the Free Software Foundation, either version 3 of the License, or
+ (at your option) any later version.
+
+ Multiprotocol is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ GNU General Public License for more details.
+
+ You should have received a copy of the GNU General Public License
+ along with Multiprotocol.  If not, see <http://www.gnu.org/licenses/>.
+ */
+// This module makes it possible to bind to and control the IKEA "Ansluta" line
+// of remote-controlled lights.
+// To bind, first switch the receiver into binding mode, then the TX.
+// Once bound, the TX can send one of three commands:
+//   lights off, lights dimmed 50% and lights on.
+// Those are mapped to throttle ranges 0..0x55, 0x56..0xAA, 0xAB..0xFF.
+#if defined(IKEAANSLUTA_CC2500_INO)
+
+#include "iface_cc2500.h"
+
+#define IKEAANSLUTA_BIND_COUNT	30  // ~ 2sec autobind/65ms per loop = 30 binding packets
+
+// Commands
+#define IKEAANSLUTA_LIGHT_OFF 0x01
+#define IKEAANSLUTA_LIGHT_DIM 0x02  // 50% dimmed light
+#define IKEAANSLUTA_LIGHT_ON  0x03
+#define IKEAANSLUTA_PAIR 0xFF
+
+void IKEAANSLUTA_send_command(uint8_t command){
+      CC2500_Strobe(CC2500_SIDLE);
+      packet[4] = option;
+      packet[5] = command;
+      CC2500_WriteData(packet, 8);
+}
+
+uint16_t IKEAANSLUTA_callback(void)
+{
+    if (bind_counter) {
+        IKEAANSLUTA_send_command(IKEAANSLUTA_PAIR);
+        if(--bind_counter == 0) {
+            BIND_DONE;
+            CC2500_SetPower();
+        }
+    }
+    else {
+        uint8_t throttle = convert_channel_8b(THROTTLE);
+        uint8_t cmd = throttle <= 0x55 ? IKEAANSLUTA_LIGHT_OFF : 
+                      throttle <= 0xAA ? IKEAANSLUTA_LIGHT_DIM :
+                      IKEAANSLUTA_LIGHT_ON;
+        IKEAANSLUTA_send_command(cmd);
+    }
+    return 65535; // 65ms loop cycle is more than enough here (we could make it even longer if not for uint16_t)
+}
+
+// Register initialization values as a continuous memory block (to save on flash memory)
+const PROGMEM uint8_t IKEAANSLUTA_init_values[] = {
+  0xFF, // CC2500_06_PKTLEN
+  0x04, // CC2500_07_PKTCTRL1
+  0x05, // CC2500_08_PKTCTRL0
+  0x00, // CC2500_09_ADDR  (unused, default)
+  0x10, // CC2500_0A_CHANNR
+  0x09, // CC2500_0B_FSCTRL1
+  0x00, // CC2500_0C_FSCTRL0
+  0x5D, // CC2500_0D_FREQ2
+  0x93, // CC2500_0E_FREQ1
+  0xB1, // CC2500_0F_FREQ0
+  0x2D, // CC2500_10_MDMCFG4
+  0x3B, // CC2500_11_MDMCFG3
+  0x73, // CC2500_12_MDMCFG2
+  0xA2, // CC2500_13_MDMCFG1
+  0xF8, // CC2500_14_MDMCFG0
+  0x01, // CC2500_15_DEVIATN
+  0x07, // CC2500_16_MCSM2
+  0x30, // CC2500_17_MCSM1
+  0x18, // CC2500_18_MCSM0
+  0x1D, // CC2500_19_FOCCFG
+  0x1C, // CC2500_1A_BSCFG
+  0xC7, // CC2500_1B_AGCCTRL2
+  0x00, // CC2500_1C_AGCCTRL1
+  0xB2, // CC2500_1D_AGCCTRL0
+  0x87, // CC2500_1E_WOREVT1 (unused, default)
+  0x6b, // CC2500_1F_WOREVT0 (unused, default)
+  0xf8, // CC2500_20_WORCTRL (unused, default)
+  0xB6, // CC2500_21_FREND1
+  0x10, // CC2500_22_FREND0
+  0xEA, // CC2500_23_FSCAL3
+  0x0A, // CC2500_24_FSCAL2
+  0x00, // CC2500_25_FSCAL1
+  0x11, // CC2500_26_FSCAL0
+  0x41, // CC2500_27_RCCTRL1
+  0x00, // CC2500_28_RCCTRL0
+};
+
+void IKEAANSLUTA_init(void)
+{
+    if (IS_BIND_DONE) bind_counter = 0;
+    else bind_counter = IKEAANSLUTA_BIND_COUNT;
+
+    // All packets we send are the same
+    packet[0] = 0x06;
+    packet[1] = 0x55;
+    packet[2] = 0x01;
+    // Bytes 3&4 are the transmitter address (to which the RX binds)
+    // Byte 5 is the command.
+    packet[3] = rx_tx_addr[3];  // <pseudorandom tx-fixed value> + <rx_num>
+    // packet[4] = option;
+    // packet[5] = 0x00; // Command goes here
+    packet[6] = 0xAA;
+    packet[7] = 0xFF;
+
+    // Configure & initialize CC2500
+	for (uint8_t i = 0; i <= CC2500_28_RCCTRL0-CC2500_06_PKTLEN; ++i)
+		CC2500_WriteReg(CC2500_06_PKTLEN+i, pgm_read_byte_near(&IKEAANSLUTA_init_values[i]));    
+    CC2500_SetTxRxMode(TX_EN);
+    CC2500_SetPower();
+}
+
+#endif

Multiprotocol/J6Pro_cyrf6936.ino

@@ -59,7 +59,7 @@ static void __attribute__((unused)) j6pro_build_data_packet()
     packet[0] = 0xaa; //FIXME what is this?
     for (i = 0; i < 12; i++)
     {
-        value = convert_channel_10b(CH_AETR[i]);
+        value = convert_channel_10b(CH_AETR[i], false);
         packet[i+1] = value & 0xff;
         upperbits |= (value >> 8) << (i * 2);
     }
@@ -111,8 +111,8 @@ static void __attribute__((unused)) cyrf_datainit()
 {
     /* Use when already bound */
     uint8_t sop_idx = (0xff & (cyrfmfg_id[0] + cyrfmfg_id[1] + cyrfmfg_id[2] + cyrfmfg_id[3] - cyrfmfg_id[5])) % 19;
-    uint16_t crc =  (0xff & (cyrfmfg_id[1] - cyrfmfg_id[4] + cyrfmfg_id[5])) |
-                   ((0xff & (cyrfmfg_id[2] + cyrfmfg_id[3] - cyrfmfg_id[4] + cyrfmfg_id[5])) << 8);
+    crc =  (0xff & (cyrfmfg_id[1] - cyrfmfg_id[4] + cyrfmfg_id[5])) |
+           ((0xff & (cyrfmfg_id[2] + cyrfmfg_id[3] - cyrfmfg_id[4] + cyrfmfg_id[5])) << 8);
     //CYRF_WriteRegister(CYRF_0F_XACT_CFG, 0x24);
     CYRF_PROGMEM_ConfigSOPCode(DEVO_j6pro_sopcodes[sop_idx]);
     CYRF_ConfigCRCSeed(crc);
@@ -126,7 +126,7 @@ static void __attribute__((unused)) j6pro_set_radio_channels()
     hopping_frequency[3] = hopping_frequency[0];
 }
 
-uint16_t ReadJ6Pro()
+uint16_t J6PRO_callback()
 {
     uint16_t start;
 
@@ -226,7 +226,7 @@ uint16_t ReadJ6Pro()
     return 0;
 }
 
-uint16_t initJ6Pro()
+void J6PRO_init()
 {
     j6pro_cyrf_init();
 
@@ -234,7 +234,6 @@ uint16_t initJ6Pro()
         phase = J6PRO_BIND;
     else
         phase = J6PRO_CHANSEL;
-    return 2400;
 }
 
 #endif

Multiprotocol/JJRC345_nrf24l01.ino

@@ -16,7 +16,7 @@
 
 #if defined(JJRC345_NRF24L01_INO)
 
-#include "iface_nrf24l01.h"
+#include "iface_xn297.h"
 
 //#define JJRC345_FORCE_ID
 
@@ -24,6 +24,7 @@
 #define JJRC345_INITIAL_WAIT		500
 #define JJRC345_PACKET_SIZE			16
 #define JJRC345_RF_BIND_CHANNEL		5
+#define SKYTMBLR_RF_BIND_CHANNEL	40
 #define JJRC345_BIND_COUNT			500
 #define JJRC345_NUM_CHANNELS		4
 
@@ -32,6 +33,12 @@ enum JJRC345_FLAGS {
     // flags going to packet[8]
 	JJRC345_FLAG_HEADLESS	= 0x40,
 	JJRC345_FLAG_RTH		= 0x80,
+    // flags going to packet[9]
+	SKYTMBLR_FLAG_UNK1	    = 0x40,
+	SKYTMBLR_FLAG_UNK2	    = 0x80,
+    // flags going to packet[10]
+	SKYTMBLR_FLAG_LED	    = 0x40,
+	SKYTMBLR_FLAG_UNK3	    = 0x80,
 };
 
 static uint8_t __attribute__((unused)) JJRC345_convert_channel(uint8_t num)
@@ -55,7 +62,7 @@ static void __attribute__((unused)) JJRC345_send_packet()
 	packet[2] = 0x00;
 	if (IS_BIND_IN_PROGRESS)
 	{ //00 05 00 0A 46 4A 41 47 00 00 40 46 A5 4A F1 18
-		packet[1]  = JJRC345_RF_BIND_CHANNEL;
+		packet[1]  = (sub_protocol == JJRC345 ? JJRC345_RF_BIND_CHANNEL:SKYTMBLR_RF_BIND_CHANNEL);
 		packet[4]  = hopping_frequency[0];
 		packet[5]  = hopping_frequency[1];
 		packet[6]  = hopping_frequency[2];
@@ -64,7 +71,7 @@ static void __attribute__((unused)) JJRC345_send_packet()
 	}
 	else
 	{ //00 41 00 0A 00 80 80 80 00 00 40 46 00 49 F1 18
-		NRF24L01_WriteReg(NRF24L01_05_RF_CH, hopping_frequency[hopping_frequency_no]);
+		XN297_Hopping(hopping_frequency_no);
 		hopping_frequency_no++;
 		hopping_frequency_no %= JJRC345_NUM_CHANNELS;
 		packet[1]  = hopping_frequency[hopping_frequency_no];	// next packet will be sent on this channel
@@ -92,10 +99,14 @@ static void __attribute__((unused)) JJRC345_send_packet()
 	packet[3] = 0x00;											// Checksum upper bits
 
 	packet[8] = 0x00											// Rudder trim, 00 when not used, 01..1F when trimmed left, 20..3F
-				| GET_FLAG(CH6_SW,JJRC345_FLAG_HEADLESS)		// Headless mode: 00 normal, 40 headless
-				| GET_FLAG(CH7_SW,JJRC345_FLAG_RTH);			// RTH: 80 active
-	packet[9] = 0;												// Elevator trim, 00 when not used, 20..25 when trimmed up, 0..1F when trimmed down
-	packet[10] = 0x40;											// Aileron trim, 40 when not used, 40..5F when trimmed left, 61..7F when trimmed right
+				| GET_FLAG(CH6_SW ,JJRC345_FLAG_HEADLESS)		// 0x40 HeadLess
+				| GET_FLAG(CH7_SW ,JJRC345_FLAG_RTH);			// 0x80 RTH
+	packet[9] = 0x00												// Elevator trim, 00 when not used, 20..25 when trimmed up, 0..1F when trimmed down
+				| GET_FLAG(CH9_SW ,SKYTMBLR_FLAG_UNK1)			// 0x40 Unknown
+				| GET_FLAG(CH10_SW,SKYTMBLR_FLAG_UNK2);			// 0x80 Unknown
+	packet[10] = 0x00											// Aileron  trim, 00 when not used, 00..1F when trimmed left, 21..3F when trimmed right
+				| GET_FLAG(!CH8_SW,SKYTMBLR_FLAG_LED)			// 0x40 LED
+				| GET_FLAG(CH11_SW,SKYTMBLR_FLAG_UNK3);			// 0x80 Unknown
 
 	packet[11] = hopping_frequency[0];							// First hopping frequency
 
@@ -110,28 +121,18 @@ static void __attribute__((unused)) JJRC345_send_packet()
 	packet[14] = rx_tx_addr[2];
 	packet[15] = rx_tx_addr[3];
 
-	// Power on, TX mode
-	XN297_Configure(_BV(NRF24L01_00_EN_CRC) | _BV(NRF24L01_00_CRCO) | _BV(NRF24L01_00_PWR_UP));
-	NRF24L01_WriteReg(NRF24L01_07_STATUS, 0x70);
-	NRF24L01_FlushTx();
+	// Send
+	XN297_SetPower();
+	XN297_SetTxRxMode(TX_EN);
 	XN297_WritePayload(packet, JJRC345_PACKET_SIZE);
-
-	NRF24L01_SetPower();	// Set tx_power
 }
 
-static void __attribute__((unused)) JJRC345_init()
+static void __attribute__((unused)) JJRC345_RF_init()
 {
-    NRF24L01_Initialize();
-    NRF24L01_SetTxRxMode(TX_EN);
+	XN297_Configure(XN297_CRCEN, XN297_SCRAMBLED, XN297_1M);
     XN297_SetTXAddr((uint8_t*)"\xcc\xcc\xcc\xcc\xcc", 5);
-    NRF24L01_WriteReg(NRF24L01_05_RF_CH, JJRC345_RF_BIND_CHANNEL);	// Bind channel
-    NRF24L01_FlushTx();
-    NRF24L01_FlushRx();
-    NRF24L01_WriteReg(NRF24L01_07_STATUS, 0x70);					// Clear data ready, data sent, and retransmit
-    NRF24L01_WriteReg(NRF24L01_01_EN_AA, 0x00);						// No Auto Acknowldgement on all data pipes
-    NRF24L01_WriteReg(NRF24L01_02_EN_RXADDR, 0x01);					// Enable data pipe 0 only
-    NRF24L01_SetBitrate(NRF24L01_BR_1M);							// 1 Mbps
-    NRF24L01_SetPower();
+	//XN297_HoppingCalib(JJRC345_NUM_CHANNELS);
+	XN297_RFChannel(sub_protocol == JJRC345 ? JJRC345_RF_BIND_CHANNEL:SKYTMBLR_RF_BIND_CHANNEL);	// Bind channel
 }
 
 uint16_t JJRC345_callback()
@@ -139,11 +140,10 @@ uint16_t JJRC345_callback()
 	#ifdef MULTI_SYNC
 		telemetry_set_input_sync(JJRC345_PACKET_PERIOD);
 	#endif
-	if(IS_BIND_IN_PROGRESS)
+	if(bind_counter)
 	{
-		if (bind_counter)
-			bind_counter--;
-		else
+		bind_counter--;
+		if (bind_counter==0)
 			BIND_DONE;
 	}
 	JJRC345_send_packet();
@@ -172,13 +172,12 @@ static void __attribute__((unused)) JJRC345_initialize_txid()
 	#endif
 }
 
-uint16_t initJJRC345(void)
+void JJRC345_init(void)
 {
 	BIND_IN_PROGRESS;	// autobind protocol
     bind_counter = JJRC345_BIND_COUNT;
 	JJRC345_initialize_txid();
-	JJRC345_init();
-	return	JJRC345_INITIAL_WAIT;
+	JJRC345_RF_init();
 }
 
 #endif

Multiprotocol/Joysway_a7105.ino

@@ -0,0 +1,115 @@
+/*
+ This project is free software: you can redistribute it and/or modify
+ it under the terms of the GNU General Public License as published by
+ the Free Software Foundation, either version 3 of the License, or
+ (at your option) any later version.
+
+ Multiprotocol is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ GNU General Public License for more details.
+
+ You should have received a copy of the GNU General Public License
+ along with Multiprotocol.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#if defined(JOYSWAY_A7105_INO)
+
+#include "iface_a7105.h"
+
+//#define JOYSWAY_FORCE_ID
+
+static void __attribute__((unused)) JOYSWAY_send_packet()
+{
+	static uint8_t next_ch = 0x30;
+	
+	//RF frequency
+	if (packet_count == 254)
+	{
+		packet_count = 0;
+		A7105_WriteID(0x5475c52a);
+		rf_ch_num = 0x0a;
+	}
+	else if (packet_count == 2)
+	{
+		A7105_WriteID(MProtocol_id);
+		rf_ch_num = 0x30;
+	}
+	else
+	{
+		if (packet_count & 0x01)
+			rf_ch_num = 0x30;
+		else
+			rf_ch_num = next_ch;
+	}
+	if (! (packet_count & 0x01))
+	{
+		next_ch++;
+		if (next_ch >= 0x45)
+			next_ch = 0x30;
+	}
+
+	//Payload
+	packet[0] = packet_count == 0 ? 0xdd : 0xff;
+	//ID
+	packet[1] = rx_tx_addr[0];
+	packet[2] = rx_tx_addr[1];
+	packet[3] = rx_tx_addr[2];
+	packet[4] = rx_tx_addr[3];
+	packet[5] = 0x00;
+	//Channels
+	for (uint8_t i = 0; i < 4; i++)
+		packet[ 6 + (i & 0x01) + ((i & 0x02)<<1)] = convert_channel_16b_limit(i, 0x00, 0xCC);
+	packet[8] = 0x64;
+	packet[9] = 0x64;
+	packet[12] = 0x64;
+	packet[13] = 0x64;
+	packet[14] = packet_count == 0 ? 0x30 : 0xaa;
+	//Check
+	uint8_t value = 0;
+	for (uint8_t i = 0; i < 15; i++)
+		value += packet[i];
+	packet[15] = value;
+
+	//Send
+	#if 0
+		debug("ch=%02X P=",rf_ch_num);
+		for(uint8_t i=0; i<16; i++)
+			debug("%02X ", packet[i]);
+		debugln("");
+	#endif
+	A7105_WriteData(16, rf_ch_num);
+	A7105_SetPower();
+	packet_count++;
+}
+
+uint16_t JOYSWAY_callback()
+{
+	#ifdef MULTI_SYNC
+		telemetry_set_input_sync(6000);
+	#endif
+	#ifndef FORCE_JOYSWAY_TUNING
+		A7105_AdjustLOBaseFreq(1);
+	#endif
+
+	JOYSWAY_send_packet();
+	return 6000;
+}
+
+void JOYSWAY_init()
+{
+	BIND_DONE;		// not a bind protocol
+
+	MProtocol_id &= 0x00FFFFFF;
+	MProtocol_id |= 0xF8000000;
+	#ifdef JOYSWAY_FORCE_ID
+		MProtocol_id = 0xf82dcaa0;
+	#endif
+
+	set_rx_tx_addr(MProtocol_id);
+
+	A7105_Init();
+	
+	packet_count = 2;
+}
+#endif

Multiprotocol/KF606_ccnrf.ino

@@ -14,9 +14,9 @@ Multiprotocol is distributed in the hope that it will be useful,
  */
 // Compatible with KF606 plane.
 
-#if defined(KF606_NRF24L01_INO)
+#if defined(KF606_CCNRF_INO)
 
-#include "iface_nrf250k.h"
+#include "iface_xn297.h"
 
 //#define FORCE_KF606_ORIGINAL_ID
 
@@ -45,14 +45,15 @@ static void __attribute__((unused)) KF606_send_packet()
 	}
 	if(IS_BIND_DONE)
 	{
-		XN297L_Hopping(hopping_frequency_no);
+		XN297_Hopping(hopping_frequency_no);
 		hopping_frequency_no ^= 1;			// 2 RF channels
 	}
 
-	XN297L_WritePayload(packet, KF606_PAYLOAD_SIZE);
-
-	XN297L_SetPower();		// Set tx_power
-	XN297L_SetFreqOffset();	// Set frequency offset
+	// Send
+	XN297_SetPower();
+	XN297_SetFreqOffset();
+	XN297_SetTxRxMode(TX_EN);
+	XN297_WritePayload(packet, KF606_PAYLOAD_SIZE);
 }
 
 static void __attribute__((unused)) KF606_initialize_txid()
@@ -76,12 +77,12 @@ static void __attribute__((unused)) KF606_initialize_txid()
 	#endif
 }
 
-static void __attribute__((unused)) KF606_init()
+static void __attribute__((unused)) KF606_RF_init()
 {
-	XN297L_Init();
-	XN297L_SetTXAddr((uint8_t*)"\xe7\xe7\xe7\xe7\xe7", 5);
-	XN297L_HoppingCalib(KF606_RF_NUM_CHANNELS);	// Calibrate all channels
-	XN297L_RFChannel(KF606_RF_BIND_CHANNEL);	// Set bind channel
+	XN297_Configure(XN297_CRCEN, XN297_SCRAMBLED, XN297_250K);
+	XN297_SetTXAddr((uint8_t*)"\xe7\xe7\xe7\xe7\xe7", 5);
+	XN297_HoppingCalib(KF606_RF_NUM_CHANNELS);					// Calibrate all channels
+	XN297_RFChannel(KF606_RF_BIND_CHANNEL);						// Set bind channel
 }
 
 uint16_t KF606_callback()
@@ -89,7 +90,7 @@ uint16_t KF606_callback()
 	#ifdef MULTI_SYNC
 		telemetry_set_input_sync(KF606_PACKET_PERIOD);
 	#endif
-	if(IS_BIND_IN_PROGRESS)
+	if(bind_counter)
 		if(--bind_counter==0)
 		{
 			BIND_DONE;
@@ -99,14 +100,13 @@ uint16_t KF606_callback()
 	return KF606_PACKET_PERIOD;
 }
 
-uint16_t initKF606()
+void KF606_init()
 {
 	BIND_IN_PROGRESS;	// autobind protocol
 	KF606_initialize_txid();
-	KF606_init();
+	KF606_RF_init();
 	hopping_frequency_no = 0;
 	bind_counter=KF606_BIND_COUNT;
-	return KF606_INITIAL_WAIT;
 }
 
 #endif

Multiprotocol/KN_nrf24l01.ino

@@ -125,16 +125,16 @@ static void __attribute__((unused)) kn_bind_init()
 static void __attribute__((unused)) kn_update_packet_control_data()
 {
 	uint16_t value;
-	value = convert_channel_10b(THROTTLE);
+	value = convert_channel_10b(THROTTLE, false);
 	packet[0]  = (value >> 8) & 0xFF;
 	packet[1]  = value & 0xFF;
-	value = convert_channel_10b(AILERON);
+	value = convert_channel_10b(AILERON, false);
 	packet[2]  = (value >> 8) & 0xFF;
 	packet[3]  = value & 0xFF;
-	value = convert_channel_10b(ELEVATOR);
+	value = convert_channel_10b(ELEVATOR, false);
 	packet[4]  = (value >> 8) & 0xFF;
 	packet[5]  = value & 0xFF;
-	value = convert_channel_10b(RUDDER);
+	value = convert_channel_10b(RUDDER, false);
 	packet[6]  = (value >> 8) & 0xFF;
 	packet[7]  = value & 0xFF;
 	// Trims, middle is 0x64 (100) range 0-200
@@ -239,40 +239,25 @@ static void __attribute__((unused)) kn_calculate_freqency_hopping_channels()
 // V977 needs payload length in the packet. We should configure 24L01 to enable Packet Control Field(PCF)
 //   Some RX reg settings are actually for enable PCF
 //-------------------------------------------------------------------------------------------------
-static void __attribute__((unused)) kn_init()
+static void __attribute__((unused)) KN_RF_init()
 {
 	kn_calculate_tx_addr();
 	kn_calculate_freqency_hopping_channels();
 
 	NRF24L01_Initialize();
 
-	NRF24L01_WriteReg(NRF24L01_00_CONFIG, _BV(NRF24L01_00_EN_CRC) | _BV(NRF24L01_00_CRCO)); 
-	NRF24L01_WriteReg(NRF24L01_01_EN_AA, 0x00);      // No Auto Acknoledgement
-	NRF24L01_WriteReg(NRF24L01_02_EN_RXADDR, 0x01);  // Enable data pipe 0
-	NRF24L01_WriteReg(NRF24L01_03_SETUP_AW, 0x03);   // 5-byte RX/TX address
-	NRF24L01_WriteReg(NRF24L01_04_SETUP_RETR, 0);    // Disable retransmit
-	NRF24L01_SetPower();
-	NRF24L01_WriteReg(NRF24L01_07_STATUS, 0x70);     // Clear data ready, data sent, and retransmit
 	NRF24L01_WriteReg(NRF24L01_11_RX_PW_P0, 0x20);   // bytes of data payload for pipe 0
-
-
-	NRF24L01_Activate(0x73);
 	NRF24L01_WriteReg(NRF24L01_1C_DYNPD, 1); // Dynamic payload for data pipe 0
 	// Enable: Dynamic Payload Length to enable PCF
 	NRF24L01_WriteReg(NRF24L01_1D_FEATURE, _BV(NRF2401_1D_EN_DPL));
 
-	NRF24L01_SetPower();
-
-	NRF24L01_FlushTx();
-	// Turn radio power on
-	NRF24L01_SetTxRxMode(TX_EN);
-	NRF24L01_SetBitrate(NRF24L01_BR_1M);	//USE1MBPS_YES ? NRF24L01_BR_1M : NRF24L01_BR_250K;
+	NRF24L01_SetTxRxMode(TX_EN);						// Clear data ready, data sent, retransmit and enable CRC 16bits, ready for TX
 }
   
 //================================================================================================
 // Private Functions
 //================================================================================================
-uint16_t initKN()
+void KN_init()
 {
 	if(sub_protocol==WLTOYS)
 	{
@@ -288,13 +273,11 @@ uint16_t initKN()
 		packet_count  = KN_FX_PACKET_SEND_COUNT;
 		seed = KN_FX_PACKET_SEND_COUNT * KN_FX_SENDING_PACKET_PERIOD;
 	}
-	kn_init();
+	KN_RF_init();
 	phase = IS_BIND_IN_PROGRESS ? KN_PHASE_PRE_BIND : KN_PHASE_PRE_SEND;
-
-	return KN_INIT_WAIT_MS;
 }
 
-uint16_t kn_callback()
+uint16_t KN_callback()
 {
 	switch (phase)
 	{

Multiprotocol/Kyosho_a7105.ino

@@ -0,0 +1,201 @@
+/*
+ This project is free software: you can redistribute it and/or modify
+ it under the terms of the GNU General Public License as published by
+ the Free Software Foundation, either version 3 of the License, or
+ (at your option) any later version.
+
+ Multiprotocol is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ GNU General Public License for more details.
+
+ You should have received a copy of the GNU General Public License
+ along with Multiprotocol.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#if defined(KYOSHO_A7105_INO)
+
+#include "iface_a7105.h"
+
+//#define KYOSHO_FORCE_ID_FHSS
+//#define KYOSHO_FORCE_ID_HYPE
+
+//Kyosho constants & variables
+#define KYOSHO_BIND_COUNT 2500
+
+static void __attribute__((unused)) KYOSHO_send_packet()
+{
+	//ID
+	packet[1] = rx_tx_addr[0];
+	packet[2] = rx_tx_addr[1];
+	packet[3] = rx_tx_addr[2];
+	packet[4] = rx_tx_addr[3];
+	//unknown may be RX ID on some other remotes
+	memset(packet+5,0xFF,4);
+	
+	if(IS_BIND_IN_PROGRESS)
+	{
+		packet[ 0]  = 0xBC;						// bind indicator
+		packet[ 9] &= 0x01;
+		packet[ 9] ^= 0x01;						// high/ low part of the RF table
+		packet[10]  = 0x00;
+		//RF table
+		for(uint8_t i=0; i<16;i++)
+			packet[i+11]=hopping_frequency[i+(packet[9]<<4)];
+		//unknwon
+		packet[27]  = 0x05;
+		packet[28]  = 0x00;
+		memset(packet+29,0xFF,8);
+		//frequency hop during bind
+		if(packet[9])
+			rf_ch_num=0x8C;
+		else
+			rf_ch_num=0x0D;
+	}
+	else
+	{
+		packet[ 0]  = 0x58;						// normal packet
+		//14 channels: steering, throttle, ...
+		for(uint8_t i = 0; i < 14; i++)
+		{
+			uint16_t temp=convert_channel_ppm(i);
+			packet[9 + i*2]=temp&0xFF;			// low byte of servo timing(1000-2000us)
+			packet[10 + i*2]=(temp>>8)&0xFF;	// high byte of servo timing(1000-2000us)
+		}
+		rf_ch_num=hopping_frequency[hopping_frequency_no];
+		hopping_frequency_no++;
+		packet[34] |= (hopping_frequency_no&0x0F)<<4;
+		packet[36] |= (hopping_frequency_no&0xF0);		// last byte is ending with F on the dumps so let's see
+		hopping_frequency_no &= 0x1F;
+	}
+	#if 0
+		debug("ch=%02X P=",rf_ch_num);
+		for(uint8_t i=0; i<37; i++)
+			debug("%02X ", packet[i]);
+		debugln("");
+	#endif
+	A7105_WriteData(37, rf_ch_num);
+}
+
+static void __attribute__((unused)) KYOSHO_hype_send_packet()
+{
+	if(IS_BIND_IN_PROGRESS)
+	{
+		if(packet_sent==0)
+		{//build the packet and send it
+			packet[0] = rx_tx_addr[1];
+			packet[1] = rx_tx_addr[3];
+			//RF table
+			for(uint8_t i=0; i<15;i++)
+				packet[i+2]=hopping_frequency[i];
+			A7105_WriteData(17, 0x01);
+			packet_sent++;
+			packet_period=1421;
+			#if 0
+				debug("ch=01 P=");
+				for(uint8_t i=0; i<17; i++)
+					debug("%02X ", packet[i]);
+				debugln("");
+			#endif
+		}
+		else
+			A7105_Strobe(A7105_TX);	//only send
+	}
+	else
+	{
+		//original TX is only refreshing the packet every 20ms and keep repeating the same packet in between (STROBE_TX) 
+		//build packet=6 channels with order AETR
+		for(uint8_t i=0;i<6;i++)
+			packet[i] = convert_channel_8b(CH_AETR[i]);
+		//set RF channel
+		rf_ch_num=hopping_frequency[hopping_frequency_no];
+		hopping_frequency_no++;
+		if(hopping_frequency_no>14)
+			hopping_frequency_no = 0;
+		//send it
+		A7105_WriteData(6, rf_ch_num);
+		packet_period=931;	//packet period fluctuates a lot on the original TX from one packet to the other but stable if looking over a period of 40ms
+		#if 0
+			debug("ch=%02X P=",rf_ch_num);
+			for(uint8_t i=0; i<6; i++)
+				debug("%02X ", packet[i]);
+			debugln("");
+		#endif
+	}
+}
+
+uint16_t KYOSHO_callback()
+{
+	#ifndef FORCE_KYOSHO_TUNING
+		A7105_AdjustLOBaseFreq(1);
+	#endif
+	if(IS_BIND_IN_PROGRESS)
+	{
+		bind_counter--;
+		if (bind_counter==0)
+		{
+			BIND_DONE;
+			if(sub_protocol==KYOSHO_HYPE)
+			{
+				A7105_WriteID(MProtocol_id);
+				A7105_WriteReg(A7105_03_FIFOI,0x05);
+			}
+		}
+	}
+	else
+	{
+		if(hopping_frequency_no==0)
+			A7105_SetPower();
+		#ifdef MULTI_SYNC
+			telemetry_set_input_sync(packet_period);
+		#endif
+	}
+	if(sub_protocol==KYOSHO_FHSS)
+		KYOSHO_send_packet();
+	else//HYPE
+		KYOSHO_hype_send_packet();
+	return packet_period;
+}
+
+void KYOSHO_init()
+{
+	A7105_Init();
+
+	// compute channels from ID
+	calc_fh_channels(sub_protocol==KYOSHO_FHSS?32:15);
+	hopping_frequency_no=0;
+
+	#ifdef KYOSHO_FORCE_ID_FHSS
+		if(sub_protocol==KYOSHO_FHSS)
+		{
+			memcpy(rx_tx_addr,"\x3A\x39\x37\x00",4);
+			memcpy(hopping_frequency,"\x29\x4C\x67\x92\x31\x1C\x77\x18\x23\x6E\x81\x5C\x8F\x5A\x51\x94\x7A\x12\x45\x6C\x7F\x1E\x0D\x88\x63\x8C\x4F\x37\x26\x61\x2C\x8A",32);
+		}
+	#endif
+	if(sub_protocol==KYOSHO_HYPE)
+	{
+		MProtocol_id &= 0x00FF00FF;
+		rx_tx_addr[0] = 0xAF - (rx_tx_addr[1]&0x0F);
+		rx_tx_addr[2] = 0xFF -  rx_tx_addr[3];
+		MProtocol_id |= (rx_tx_addr[0]<<24) + (rx_tx_addr[2]<<8);
+		#ifdef KYOSHO_FORCE_ID_HYPE
+			MProtocol_id=0xAF90738C;
+			set_rx_tx_addr(MProtocol_id);
+			memcpy(hopping_frequency,"\x27\x1B\x63\x75\x03\x39\x57\x69\x87\x0F\x7B\x3F\x33\x51\x6F",15);
+		#endif
+		if(IS_BIND_IN_PROGRESS)
+			A7105_WriteID(0xAF00FF00);
+		else
+		{
+			A7105_WriteID(MProtocol_id);
+			A7105_WriteReg(A7105_03_FIFOI,0x05);
+		}
+	}
+
+	if(IS_BIND_IN_PROGRESS)
+		bind_counter = KYOSHO_BIND_COUNT;
+
+	packet_sent=0;
+	packet_period=3852;		//FHSS
+}
+#endif

Multiprotocol/LOLI_nrf24l01.ino

@@ -0,0 +1,300 @@
+/*
+ This project is free software: you can redistribute it and/or modify
+ it under the terms of the GNU General Public License as published by
+ the Free Software Foundation, either version 3 of the License, or
+ (at your option) any later version.
+
+Multiprotocol is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ GNU General Public License for more details.
+
+ You should have received a copy of the GNU General Public License
+ along with Multiprotocol.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#if defined(LOLI_NRF24L01_INO)
+
+#include "iface_nrf24l01.h"
+
+#define LOLI_BIND_CHANNEL	33
+#define LOLI_PACKET_SIZE	11
+#define LOLI_NUM_CHANNELS	5
+
+static void __attribute__((unused)) LOLI_RF_init()
+{
+	NRF24L01_Initialize();
+
+	NRF24L01_WriteRegisterMulti(NRF24L01_0A_RX_ADDR_P0, (uint8_t*)"LOVE!", 5);
+	NRF24L01_WriteRegisterMulti(NRF24L01_10_TX_ADDR, (uint8_t*)"LOVE!", 5);
+	NRF24L01_WriteReg(NRF24L01_11_RX_PW_P0, LOLI_PACKET_SIZE);	// RX FIFO size
+	NRF24L01_SetBitrate(NRF24L01_BR_250K);             	// 250Kbps
+}
+
+// flags going to packet[1] for packet type 0xa2 (Rx config)
+#define LOLI_FLAG_PWM7   0x02
+#define LOLI_FLAG_PWM2   0x04
+#define LOLI_FLAG_PWM1   0x08
+#define LOLI_FLAG_SBUS   0x40
+#define LOLI_FLAG_PPM    0x80
+
+// flags going to packet[2] for packet type 0xa2 (Rx config)
+#define LOLI_FLAG_SW8    0x01
+#define LOLI_FLAG_SW7    0x02
+#define LOLI_FLAG_SW6    0x04
+#define LOLI_FLAG_SW5    0x08
+#define LOLI_FLAG_SW4    0x10
+#define LOLI_FLAG_SW3    0x20
+#define LOLI_FLAG_SW2    0x40
+#define LOLI_FLAG_SW1    0x80
+
+#ifdef LOLI_NRF24L01_INO
+	uint8_t LOLI_P1, LOLI_P2;
+#endif
+
+static void __attribute__((unused)) LOLI_send_packet()
+{
+	if(IS_BIND_IN_PROGRESS)
+	{
+		packet[0] = 0xa0;
+		memcpy(&packet[1], hopping_frequency, LOLI_NUM_CHANNELS);
+		memcpy(&packet[6], rx_tx_addr, 5);
+		rf_ch_num = LOLI_BIND_CHANNEL;
+	}
+	else
+	{
+		//Check RX config
+		uint8_t P1=0;
+		uint8_t P2=0;
+		//ch1: PWM/PPM
+		if(Channel_data[CH1+8] > CHANNEL_MAX_COMMAND)
+			P1|=LOLI_FLAG_PWM1;
+		else if(Channel_data[CH1+8] > CHANNEL_SWITCH)
+			P1|=LOLI_FLAG_PPM;
+		//ch2: PWM
+		if(Channel_data[CH2+8] > CHANNEL_MAX_COMMAND)
+			P1|=LOLI_FLAG_PWM2;
+		//ch5: SBUS
+		if(Channel_data[CH5+8] > CHANNEL_SWITCH)
+			P1|=LOLI_FLAG_SBUS;
+		//ch7: PWM
+		if(Channel_data[CH7+8] > CHANNEL_MAX_COMMAND)
+			P1|=LOLI_FLAG_PWM7;
+
+		//switches
+		for(uint8_t i=0;i<8;i++)
+			if(Channel_data[i+8]<CHANNEL_MIN_COMMAND)
+				P2 |= 1 << (7-i);
+
+		if(LOLI_P1!=P1 || LOLI_P2!=P2)
+			flags=10;
+		if(flags)
+		{// Send RX config since P1 or P2 have changed
+			LOLI_P1=P1;LOLI_P2=P2;
+			packet[0] = 0xa2;
+			packet[1] = LOLI_P1;	// CH1:LOLI_FLAG_PPM || LOLI_FLAG_PWM1, CH2:LOLI_FLAG_PWM2, CH5:LOLI_FLAG_SBUS, CH7:LOLI_FLAG_PWM7
+			packet[2] = LOLI_P2;	// CHx switch bit(8-x)=1
+			flags--;
+		}
+		else
+		{// Normal packet
+			#ifdef FAILSAFE_ENABLE
+				packet[0] = IS_FAILSAFE_VALUES_on ? 0xa0 : 0xa1;
+			#else
+				packet[0] = 0xa1;
+			#endif
+
+			//Build channels
+			uint8_t ch=0, offset=1;
+			uint16_t val;
+			for(uint8_t i=0;i<2;i++)
+			{
+				val = convert_channel_10b(ch++, IS_FAILSAFE_VALUES_on);
+				packet[offset++] = val >> 2;
+				packet[offset  ] = val << 6;
+				val = convert_channel_10b(ch++, IS_FAILSAFE_VALUES_on);
+				packet[offset++]|= val >> 4;
+				packet[offset  ] = val << 4;
+				val = convert_channel_10b(ch++, IS_FAILSAFE_VALUES_on);
+				packet[offset++]|= val >> 6;
+				packet[offset  ] = val << 2;
+				val = convert_channel_10b(ch++, IS_FAILSAFE_VALUES_on);
+				packet[offset++]|= val >> 8;
+				packet[offset++] = val & 0xff;
+			}
+			FAILSAFE_VALUES_off;	// Failsafe values are sent if they were available
+		}
+
+		if (++hopping_frequency_no > LOLI_NUM_CHANNELS-1)
+			hopping_frequency_no = 0;
+		rf_ch_num = hopping_frequency[hopping_frequency_no];
+	}
+	
+	#if 0
+		debug("P(%02X):",rf_ch_num);
+		for(uint8_t i=0; i<LOLI_PACKET_SIZE; i++)
+			debug(" %02X",packet[i]);
+		debugln("");
+	#endif
+		
+	//Send packet
+	NRF24L01_WriteReg(NRF24L01_05_RF_CH, rf_ch_num);
+	NRF24L01_SetPower();
+	NRF24L01_SetTxRxMode(TXRX_OFF);
+	NRF24L01_SetTxRxMode(TX_EN);
+	NRF24L01_WriteReg(NRF24L01_00_CONFIG, 0x0a);  // 8bit CRC, TX
+	NRF24L01_FlushTx();
+	NRF24L01_WritePayload(packet, LOLI_PACKET_SIZE);
+}
+
+enum{
+	LOLI_BIND1,
+	LOLI_BIND2,
+	LOLI_BIND3,
+	LOLI_PREP_DATA,
+	LOLI_DATA1,
+	LOLI_DATA2,
+	LOLI_SET_RX_CONFIG,
+	LOLI_SET_FAILSAFE
+};
+
+#define LOLI_WRITE_TIME 1000
+
+uint16_t LOLI_callback()
+{
+	switch (phase)
+	{
+		case LOLI_BIND1:
+			if(bind_counter)
+				if(--bind_counter==0)
+				{
+					phase=LOLI_PREP_DATA;
+					break;
+				}
+			// send bind packet
+			NRF24L01_SetTxRxMode(TXRX_OFF);
+			NRF24L01_SetTxRxMode(TX_EN);
+			NRF24L01_WriteReg(NRF24L01_00_CONFIG, 0x0a);  // 8bit CRC, TX
+			LOLI_send_packet();
+			phase++;
+			return 2000;
+		case LOLI_BIND2:
+			// switch to RX mode
+			NRF24L01_SetTxRxMode(TXRX_OFF);
+			NRF24L01_FlushRx();
+			NRF24L01_SetTxRxMode(RX_EN);
+			NRF24L01_WriteReg(NRF24L01_00_CONFIG, 0x3b);  // 8bit CRC, RX
+			phase++;
+			packet_count = 0;
+			return 2000;
+		case LOLI_BIND3:
+			// got bind response ?
+			if (NRF24L01_ReadReg(NRF24L01_07_STATUS) & _BV(NRF24L01_07_RX_DR))
+			{
+				NRF24L01_ReadPayload(packet, LOLI_PACKET_SIZE);
+				if (packet[0] == 'O' && packet[1] == 'K')
+				{
+					debugln("Bind OK");
+					phase++;	// LOLI_PREP_DATA
+					break;
+				}
+			}
+			packet_count++;
+			if (packet_count > 50)
+				phase = LOLI_BIND1;
+			return 1000;
+
+		case LOLI_PREP_DATA:
+			BIND_DONE;
+			NRF24L01_WriteRegisterMulti(NRF24L01_0A_RX_ADDR_P0, rx_tx_addr, 5);
+			NRF24L01_WriteRegisterMulti(NRF24L01_10_TX_ADDR, rx_tx_addr, 5);
+			NRF24L01_WriteReg(NRF24L01_07_STATUS, 0x70);
+			NRF24L01_FlushRx();
+			packet_count = 0;
+			//defaut RX config with servo outputs
+			LOLI_P1=0;LOLI_P2=0;flags=10;
+			phase++;
+
+		case LOLI_DATA1:
+			#ifdef LOLI_HUB_TELEMETRY
+				// Check telemetry
+				if (NRF24L01_ReadReg(NRF24L01_07_STATUS) & _BV(NRF24L01_07_RX_DR))
+				{  // RX fifo data ready
+					NRF24L01_ReadPayload(packet, LOLI_PACKET_SIZE);
+					#if 0
+						debug("T:");
+						for(uint8_t i=0; i<LOLI_PACKET_SIZE; i++)
+							debug(" %02X",packet[i]);
+						debugln("");
+					#endif
+					RX_RSSI = packet[0]<<1;
+					uint16_t val=((packet[1] << 8) | packet[2])/10;
+					if(val > 255) val=255;
+					v_lipo1 = val;
+					val=((packet[3] << 8) | packet[4])/10;
+					if(val > 255) val=255;
+					v_lipo2 = val;
+					telemetry_link = 1;
+					telemetry_counter++;			// TX LQI counter
+					if(telemetry_lost)
+					{
+						telemetry_lost = 0;
+						packet_count = 100;
+						telemetry_counter = 100;
+					}
+				}
+				//LQI
+				packet_count++;
+				if(packet_count>=100)
+				{
+					packet_count=0;
+					TX_LQI=telemetry_counter;
+					if(telemetry_counter==0)
+						telemetry_lost = 1;
+					telemetry_counter = 0;
+				}
+			#endif
+			
+			// Send data packet
+			LOLI_send_packet();
+			
+	#ifdef LOLI_HUB_TELEMETRY
+			phase ++;
+			return LOLI_WRITE_TIME;
+		case LOLI_DATA2:
+			// Wait for packet to be sent
+			while( (NRF24L01_ReadReg(NRF24L01_07_STATUS) & _BV(NRF24L01_07_TX_DS)) == 0);
+			// Switch to RX mode
+			NRF24L01_SetTxRxMode(TXRX_OFF);
+			NRF24L01_FlushRx();
+			NRF24L01_SetTxRxMode(RX_EN);
+			NRF24L01_WriteReg(NRF24L01_00_CONFIG, 0x3b);  // 8bit CRC, RX
+			phase = LOLI_DATA1;
+			return 20000 - LOLI_WRITE_TIME;
+	#else
+			break;
+	#endif
+	}
+	return 20000;
+}
+
+void LOLI_init()
+{
+	rx_tx_addr[1] %= 0x30;
+	calc_fh_channels(LOLI_NUM_CHANNELS);
+	for (uint8_t i=0; i < LOLI_NUM_CHANNELS; i++)
+		if (hopping_frequency[i] == LOLI_BIND_CHANNEL)
+			hopping_frequency[i]++;
+
+	if (IS_BIND_IN_PROGRESS)
+	{
+		bind_counter=250;
+		phase = LOLI_BIND1;
+	}
+	else
+		phase = LOLI_PREP_DATA;
+
+	LOLI_RF_init();
+}
+
+#endif

Multiprotocol/Losi_cyrf6936.ino

@@ -0,0 +1,147 @@
+/*
+ This project is free software: you can redistribute it and/or modify
+ it under the terms of the GNU General Public License as published by
+ the Free Software Foundation, either version 3 of the License, or
+ (at your option) any later version.
+
+ Multiprotocol is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ GNU General Public License for more details.
+
+ You should have received a copy of the GNU General Public License
+ along with Multiprotocol.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#if defined(LOSI_CYRF6936_INO)
+
+#include "iface_cyrf6936.h"
+
+#define LOSI_FORCE_ID
+
+const uint8_t PROGMEM LOSI_bind_sop_code[] = {0x62, 0xdf, 0xc1, 0x49, 0xdf, 0xb1, 0xc0, 0x49};
+const uint8_t LOSI_data_code[][16] = {
+	{ 0xD7, 0xA1, 0x54, 0xB1, 0x5E, 0x89, 0xAE, 0x86, 0xC9, 0x2C, 0x06, 0x93, 0x86, 0xB9, 0x9E, 0xD7 }, //bind
+/*	{ 0xE1, 0xD6, 0x31, 0x26, 0x5F, 0xBD, 0x40, 0x93, 0xDC, 0x68, 0x08, 0x99, 0x97, 0xAE, 0xAF, 0x8C },
+	{ 0xDC, 0x68, 0x08, 0x99, 0x97, 0xAE, 0xAF, 0x8C, 0xC3, 0x0E, 0x01, 0x16, 0x0E, 0x32, 0x06, 0xBA },
+	{ 0xC3, 0x0E, 0x01, 0x16, 0x0E, 0x32, 0x06, 0xBA, 0xE0, 0x83, 0x01, 0xFA, 0xAB, 0x3E, 0x8F, 0xAC },
+	{ 0xE0, 0x83, 0x01, 0xFA, 0xAB, 0x3E, 0x8F, 0xAC, 0x5C, 0xD5, 0x9C, 0xB8, 0x46, 0x9C, 0x7D, 0x84 },
+	{ 0x5C, 0xD5, 0x9C, 0xB8, 0x46, 0x9C, 0x7D, 0x84, 0xF1, 0xC6, 0xFE, 0x5C, 0x9D, 0xA5, 0x4F, 0xB7 },
+	{ 0xF1, 0xC6, 0xFE, 0x5C, 0x9D, 0xA5, 0x4F, 0xB7, 0x58, 0xB5, 0xB3, 0xDD, 0x0E, 0x28, 0xF1, 0xB0 },
+	{ 0x58, 0xB5, 0xB3, 0xDD, 0x0E, 0x28, 0xF1, 0xB0, 0x5F, 0x30, 0x3B, 0x56, 0x96, 0x45, 0xF4, 0xA1 },*/
+	{ 0x5F, 0x30, 0x3B, 0x56, 0x96, 0x45, 0xF4, 0xA1, 0x03, 0xBC, 0x6E, 0x8A, 0xEF, 0xBD, 0xFE, 0xF8 }	//normal
+};
+
+static uint16_t __attribute__((unused)) LOSI_check(uint16_t val)
+{
+	const uint8_t PROGMEM tab[] = { 0xF1, 0xDA, 0xB6, 0xC8 };
+	uint8_t res = 0x0B, tmp;
+	uint16_t calc = val>>2; 									// don't care about the 2 first bits
+	for(uint8_t i=0; i<5; i++)
+	{
+		tmp=pgm_read_byte_near(&tab[i&0x03]);
+		if(calc&0x0001)
+			res ^= tmp>>4;
+		calc >>= 1;
+		if(calc&0x0001)
+			res ^= tmp;
+		calc >>= 1;
+	}
+	return val ^ (res<<12);
+}
+
+static void __attribute__((unused)) LOSI_send_packet()
+{
+	memcpy(packet, rx_tx_addr, 4);
+	if(IS_BIND_IN_PROGRESS)
+	{
+		memcpy(&packet[4], rx_tx_addr, 4);
+		packet[8] = 0x05;               				    	// CRC?
+		packet[9] = 0x52;                   					// CRC?
+	}
+	else
+	{
+		for(uint8_t i=0; i<3; i++)
+		{
+			uint16_t val = LOSI_check(Channel_data[i]<<1);
+			packet[4+i*2] = val >> 8;
+			packet[5+i*2] = val;
+		}
+	}
+
+	CYRF_SetPower(0x38);
+	CYRF_WriteDataPacketLen(packet, 0x0A);
+	#if 0
+		for(uint8_t i=0; i < 0x0A; i++)
+			debug("%02X ", packet[i]);
+		debugln();
+	#endif
+}
+
+static void __attribute__((unused)) LOSI_cyrf_init()
+{
+	/* Initialise CYRF chip */
+	CYRF_WriteRegister(CYRF_28_CLK_EN, 0x02);
+	CYRF_WriteRegister(CYRF_32_AUTO_CAL_TIME, 0x3C);
+	CYRF_WriteRegister(CYRF_35_AUTOCAL_OFFSET, 0x14);
+	CYRF_WriteRegister(CYRF_06_RX_CFG, 0x48);
+	CYRF_WriteRegister(CYRF_1B_TX_OFFSET_LSB, 0x55);
+	CYRF_WriteRegister(CYRF_1C_TX_OFFSET_MSB, 0x05);
+	//CYRF_WriteRegister(CYRF_0F_XACT_CFG, 0x24);
+	CYRF_SetPower(0x38);
+	CYRF_WriteRegister(CYRF_12_DATA64_THOLD, 0x0A);
+	CYRF_WriteRegister(CYRF_39_ANALOG_CTRL, 0x01);
+	CYRF_WritePreamble(0x333304);
+	//CYRF_WriteRegister(CYRF_27_CLK_OVERRIDE, 0x00);
+	CYRF_WriteRegister(CYRF_10_FRAMING_CFG, 0x4A);
+	CYRF_WriteRegister(CYRF_1F_TX_OVERRIDE, 0x04);				// No CRC
+	//CYRF_WriteRegister(CYRF_1E_RX_OVERRIDE, 0x14);
+	//CYRF_WriteRegister(CYRF_14_EOP_CTRL, 0x02);
+}
+
+uint16_t LOSI_callback()
+{
+	#ifdef MULTI_SYNC
+		telemetry_set_input_sync(19738);
+	#endif
+	LOSI_send_packet();
+	if(bind_counter)
+	{
+		bind_counter--;
+		if(bind_counter==0)
+		{
+			BIND_DONE;
+			CYRF_ConfigDataCode(LOSI_data_code[1], 16);			// Load normal data code
+		}
+		return 8763;
+	}
+	return 19738;
+}
+
+void LOSI_init()
+{
+	LOSI_cyrf_init();
+	//CYRF_FindBestChannels(hopping_frequency, 1, 0, 0x13, 75);	// 75 is unknown since dump stops at 0x27, this routine resets the CRC Seed to 0
+	//CYRF_ConfigRFChannel(hopping_frequency[0] | 1);				// Only odd channels
+
+	#ifdef LOSI_FORCE_ID
+		rx_tx_addr[0] = 0x47;
+		rx_tx_addr[1] = 0x52;
+		rx_tx_addr[2] = 0xAE;
+		rx_tx_addr[3] = 0xAA;
+		CYRF_ConfigRFChannel(0x27);
+	#endif
+
+	if(IS_BIND_IN_PROGRESS)
+	{
+		bind_counter = 300;
+		CYRF_ConfigDataCode(LOSI_data_code[0], 16);				// Load bind data code
+	}
+	else
+	{
+		CYRF_ConfigDataCode(LOSI_data_code[1], 16);				// Load normal data code
+		bind_counter = 0;
+	}
+}
+
+#endif

Multiprotocol/MJXQ_ccnrf.ino

@@ -15,10 +15,9 @@
 // compatible with MJX WLH08, X600, X800, H26D, Eachine E010
 // Last sync with hexfet new_protocols/mjxq_nrf24l01.c dated 2016-01-17
 
-#if defined(MJXQ_NRF24L01_INO)
+#if defined(MJXQ_CCNRF_INO)
 
-#include "iface_nrf24l01.h"
-#include "iface_nrf250k.h"
+#include "iface_xn297.h"
 
 #define MJXQ_BIND_COUNT		150
 #define MJXQ_PACKET_PERIOD	4000  // Timeout for callback in uSec
@@ -103,6 +102,12 @@ static uint8_t __attribute__((unused)) MJXQ_pan_tilt_value()
 #define MJXQ_CHAN2TRIM(X) (((X) & 0x80 ? (X) : 0x7f - (X)) >> 1)
 static void __attribute__((unused)) MJXQ_send_packet(uint8_t bind)
 {
+	//RF freq
+	hopping_frequency_no++;
+	XN297_Hopping(hopping_frequency_no / 2);
+	hopping_frequency_no %= 2 * MJXQ_RF_NUM_CHANNELS;	// channels repeated
+
+	//Build packet
 	packet[0] = convert_channel_8b(THROTTLE);
 	packet[1] = convert_channel_s8b(RUDDER);
 	packet[4] = 0x40;							// rudder does not work well with dyntrim
@@ -192,38 +197,29 @@ static void __attribute__((unused)) MJXQ_send_packet(uint8_t bind)
 	uint8_t sum = packet[0];
 	for (uint8_t i=1; i < MJXQ_PACKET_SIZE-1; i++) sum += packet[i];
 	packet[15] = sum;
-	hopping_frequency_no++;
-	if (sub_protocol == E010 || sub_protocol == PHOENIX)
+
+	// Send
+	XN297_SetTxRxMode(TX_EN);
+	XN297_SetPower();
+#ifdef NRF24L01_INSTALLED
+	if (sub_protocol == H26D || sub_protocol == H26WH)
 	{
-		XN297L_Hopping(hopping_frequency_no / 2);
-		XN297L_SetFreqOffset();
-		XN297L_SetPower();
-		XN297L_WritePayload(packet, MJXQ_PACKET_SIZE);
+		//NRF24L01_WriteReg(NRF24L01_05_RF_CH, hopping_frequency[hopping_frequency_no / 2]);
+		//NRF24L01_WriteReg(NRF24L01_07_STATUS, 0x70);
+		//NRF24L01_FlushTx();
+		//NRF24L01_SetTxRxMode(TX_EN);
+		//NRF24L01_SetPower();
+		NRF24L01_WritePayload(packet, MJXQ_PACKET_SIZE);
 	}
 	else
-	{
-		NRF24L01_WriteReg(NRF24L01_05_RF_CH, hopping_frequency[hopping_frequency_no / 2]);
-
-		NRF24L01_WriteReg(NRF24L01_07_STATUS, 0x70);
-		NRF24L01_FlushTx();
-
-		// Power on, TX mode, 2byte CRC and send packet
-		if (sub_protocol == H26D || sub_protocol == H26WH)
-		{
-			NRF24L01_SetTxRxMode(TX_EN);
-			NRF24L01_WritePayload(packet, MJXQ_PACKET_SIZE);
-		}
-		else
-		{
-			XN297_Configure(_BV(NRF24L01_00_EN_CRC) | _BV(NRF24L01_00_CRCO) | _BV(NRF24L01_00_PWR_UP));
-			XN297_WritePayload(packet, MJXQ_PACKET_SIZE);
-		}
-		NRF24L01_SetPower();
+#endif
+	{//E010, PHOENIX, WLH08, X600, X800
+		XN297_SetFreqOffset();
+		XN297_WritePayload(packet, MJXQ_PACKET_SIZE);
 	}
-	hopping_frequency_no %= 2 * MJXQ_RF_NUM_CHANNELS;	// channels repeated
 }
 
-static void __attribute__((unused)) MJXQ_init()
+static void __attribute__((unused)) MJXQ_RF_init()
 {
 	uint8_t addr[MJXQ_ADDRESS_LENGTH];
 	memcpy(addr, "\x6d\x6a\x77\x77\x77", MJXQ_ADDRESS_LENGTH);
@@ -239,32 +235,20 @@ static void __attribute__((unused)) MJXQ_init()
 		}
 	if (sub_protocol == E010 || sub_protocol == PHOENIX)
 	{
-		XN297L_Init();
-		XN297L_SetTXAddr(addr, sizeof(addr));
-		XN297L_HoppingCalib(MJXQ_RF_NUM_CHANNELS);
+		XN297_Configure(XN297_CRCEN, XN297_SCRAMBLED, XN297_250K);
+		XN297_SetTXAddr(addr, MJXQ_ADDRESS_LENGTH);
+		XN297_HoppingCalib(MJXQ_RF_NUM_CHANNELS);
 	}
 	else
 	{
-		NRF24L01_Initialize();
-		NRF24L01_SetTxRxMode(TX_EN);
-
+		XN297_Configure(XN297_CRCEN, XN297_SCRAMBLED, XN297_1M);	// this will select the nrf and initialize it, therefore both H26 sub protocols can use common instructions
+#ifdef NRF24L01_INSTALLED
 		if (sub_protocol == H26D || sub_protocol == H26WH)
-		{
-			NRF24L01_WriteReg(NRF24L01_03_SETUP_AW,		0x03);		// 5-byte RX/TX address
 			NRF24L01_WriteRegisterMulti(NRF24L01_10_TX_ADDR, addr, MJXQ_ADDRESS_LENGTH);
-		}
 		else
+#endif
 			XN297_SetTXAddr(addr, MJXQ_ADDRESS_LENGTH);
-
-		NRF24L01_FlushTx();
-		NRF24L01_FlushRx();
-		NRF24L01_WriteReg(NRF24L01_07_STATUS,		0x70);		// Clear data ready, data sent, and retransmit
-		NRF24L01_WriteReg(NRF24L01_01_EN_AA,		0x00);		// No Auto Acknowledgment on all data pipes
-		NRF24L01_WriteReg(NRF24L01_02_EN_RXADDR,	0x01);		// Enable data pipe 0 only
-		NRF24L01_WriteReg(NRF24L01_04_SETUP_RETR,	0x00);		// no retransmits
-		NRF24L01_WriteReg(NRF24L01_11_RX_PW_P0,		MJXQ_PACKET_SIZE);
-		NRF24L01_SetBitrate(NRF24L01_BR_1M);					// 1Mbps
-		NRF24L01_SetPower();
+		//NRF24L01_WriteReg(NRF24L01_11_RX_PW_P0,		MJXQ_PACKET_SIZE);	// no RX???
 	}
 }
 
@@ -285,7 +269,7 @@ static void __attribute__((unused)) MJXQ_init2()
 				hopping_frequency[i]=pgm_read_byte_near( &E010_map_rfchan[rx_tx_addr[3]&0x0F][i] );
 				hopping_frequency[i+2]=hopping_frequency[i]+0x10;
 			}
-			XN297L_HoppingCalib(MJXQ_RF_NUM_CHANNELS);
+			XN297_HoppingCalib(MJXQ_RF_NUM_CHANNELS);
 			break;
 		case WLH08:
 			// do nothing
@@ -350,14 +334,13 @@ uint16_t MJXQ_callback()
     return MJXQ_PACKET_PERIOD;
 }
 
-uint16_t initMJXQ(void)
+void MJXQ_init(void)
 {
 	BIND_IN_PROGRESS;	// autobind protocol
 	bind_counter = MJXQ_BIND_COUNT;
     MJXQ_initialize_txid();
-    MJXQ_init();
+    MJXQ_RF_init();
 	packet_count=0;
-	return MJXQ_INITIAL_WAIT+MJXQ_PACKET_PERIOD;
 }
 
 #endif

Multiprotocol/MLINK_cyrf6936.ino

@@ -0,0 +1,608 @@
+/*
+ This project is free software: you can redistribute it and/or modify
+ it under the terms of the GNU General Public License as published by
+ the Free Software Foundation, either version 3 of the License, or
+ (at your option) any later version.
+
+ Multiprotocol is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ GNU General Public License for more details.
+
+ You should have received a copy of the GNU General Public License
+ along with Multiprotocol.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#if defined(MLINK_CYRF6936_INO)
+
+#include "iface_cyrf6936.h"
+
+//#define MLINK_FORCE_ID
+#define MLINK_BIND_COUNT	696	// around 20s
+#define MLINK_NUM_FREQ		78
+#define MLINK_BIND_CHANNEL	0x01
+#define MLINK_PACKET_SIZE	8
+
+enum {
+	MLINK_BIND_TX=0,
+	MLINK_BIND_PREP_RX,
+	MLINK_BIND_RX,
+	MLINK_PREP_DATA,
+	MLINK_SEND1,
+	MLINK_SEND2,
+	MLINK_SEND3,
+	MLINK_CHECK3,
+	MLINK_RX,
+	MLINK_BUILD4,
+};
+
+uint8_t MLINK_Data_Code[16], MLINK_CRC_Init, MLINK_Unk_6_2;
+
+const uint8_t PROGMEM MLINK_init_vals[][2] = {
+	//Init from dump
+	{ CYRF_01_TX_LENGTH,	0x08 },	// Length of packet
+	{ CYRF_02_TX_CTRL,		0x40 },	// Clear TX Buffer
+	{ CYRF_03_TX_CFG,		0x3C }, //0x3E in normal mode, 0x3C in bind mode: SDR 64 chip codes (=8 bytes data code used)
+	{ CYRF_05_RX_CTRL,		0x00 },
+	{ CYRF_06_RX_CFG,		0x93 },	// AGC enabled, overwrite enable, valid flag enable
+	{ CYRF_0B_PWR_CTRL,		0x00 },
+	//{ CYRF_0C_XTAL_CTRL,	0x00 },	// Set to GPIO on reset
+	//{ CYRF_0D_IO_CFG,		0x00 },	// Set to GPIO on reset
+	//{ CYRF_0E_GPIO_CTRL,	0x00 }, // Set by the CYRF_SetTxRxMode function
+	{ CYRF_0F_XACT_CFG,		0x04 },	// end state idle
+	{ CYRF_10_FRAMING_CFG,	0x00 },	// SOP disabled
+	{ CYRF_11_DATA32_THOLD,	0x05 }, // not used???
+	{ CYRF_12_DATA64_THOLD,	0x0F }, // 64 Chip Data PN Code Correlator Threshold
+	{ CYRF_14_EOP_CTRL,		0x05 }, // 5 consecutive noncorrelations symbol for EOP
+	{ CYRF_15_CRC_SEED_LSB,	0x00 }, // not used???
+	{ CYRF_16_CRC_SEED_MSB,	0x00 }, // not used???
+	{ CYRF_1B_TX_OFFSET_LSB,0x00 },
+	{ CYRF_1C_TX_OFFSET_MSB,0x00 },
+	{ CYRF_1D_MODE_OVERRIDE,0x00 },
+	{ CYRF_1E_RX_OVERRIDE,	0x14 },	// RX CRC16 is disabled and Force Receive Data Rate
+	{ CYRF_1F_TX_OVERRIDE,	0x04 }, // TX CRC16 is disabled
+	{ CYRF_26_XTAL_CFG,		0x08 },
+	{ CYRF_29_RX_ABORT,		0x00 },
+	{ CYRF_32_AUTO_CAL_TIME,0x3C },
+	{ CYRF_35_AUTOCAL_OFFSET,0x14 },
+	{ CYRF_39_ANALOG_CTRL,	0x03 },	// Receive invert and all slow
+};
+
+static void __attribute__((unused)) MLINK_cyrf_config()
+{
+	for(uint8_t i = 0; i < sizeof(MLINK_init_vals) / 2; i++)	
+		CYRF_WriteRegister(pgm_read_byte_near(&MLINK_init_vals[i][0]), pgm_read_byte_near(&MLINK_init_vals[i][1]));
+	CYRF_WritePreamble(0x333304);
+	CYRF_SetTxRxMode(TX_EN);
+}
+
+static void __attribute__((unused)) MLINK_send_bind_packet()
+{
+	uint8_t p_c=packet_count>>1;
+	
+	memset(packet, p_c<0x16?0x00:0xFF, MLINK_PACKET_SIZE-1);
+	packet[0]=0x0F;	// bind
+	packet[1]=p_c;
+	switch(p_c)
+	{
+		case 0x00:
+			packet[2]=0x40;			//unknown but seems constant
+			packet[4]=0x01;			//unknown but seems constant
+			packet[5]=0x03;			//unknown but seems constant
+			packet[6]=0xE3;			//unknown but seems constant
+			break;
+		case 0x05:
+			packet[6]=MLINK_CRC_Init;	//CRC init value
+			break;
+		case 0x06:
+			packet[2]=MLINK_Unk_6_2;	//unknown and different
+			//Start of hopping frequencies
+			for(uint8_t i=0;i<4;i++)
+				packet[i+3]=hopping_frequency[i];
+			break;
+		case 0x15:
+			packet[6]=0x51;			//unknown but seems constant
+			break;
+		case 0x16:
+			packet[2]=0x51;			//unknown but seems constant
+			packet[3]=0xEC;			//unknown but seems constant
+			packet[4]=0x05;			//unknown but seems constant
+			break;
+		case 0x1A:
+			packet[1]=0xFF;
+			memset(&packet[2],0x00,5);
+			break;
+	}
+	if(p_c>=0x01 && p_c<=0x04)
+	{//DATA_CODE
+		uint8_t p_c_5=(p_c-1)*5;
+		for(uint8_t i=0;i<5;i++)
+			if(i+p_c_5<16)
+				packet[i+2]=MLINK_Data_Code[i+p_c_5];
+	}
+	else
+		if(p_c>=0x07 && p_c<=0x15)
+		{//Hopping frequencies
+			uint8_t p_c_5=5*(p_c-6)-1;
+			for(uint8_t i=0;i<5;i++)
+				if(i+p_c_5<MLINK_NUM_FREQ)
+					packet[i+2]=hopping_frequency[i+p_c_5];
+		}
+		else
+			if(p_c>0x19)
+			{
+				packet[1]=0xFF;
+				memset(&packet[2], 0x00, MLINK_PACKET_SIZE-3);
+			}
+
+	//Calculate CRC
+	crc8=0xFF;	// Init = 0xFF
+	for(uint8_t i=0;i<MLINK_PACKET_SIZE-1;i++)
+		crc8_update(bit_reverse(packet[i]));
+	packet[7] = bit_reverse(crc8);			// CRC reflected out
+
+	//Debug
+	#if 0
+		debug("P(%02d):",p_c);
+		for(uint8_t i=0;i<8;i++)
+			debug(" %02X",packet[i]);
+		debugln("");
+	#endif
+
+	//Send packet
+	CYRF_WriteDataPacketLen(packet, MLINK_PACKET_SIZE);
+}
+
+static void __attribute__((unused)) MLINK_send_data_packet()
+{
+	static uint8_t tog=0;
+	uint8_t start;
+	
+#ifdef FAILSAFE_ENABLE
+	static uint8_t fs=0;
+	if(IS_FAILSAFE_VALUES_on && phase==MLINK_SEND1)
+	{
+		fs=10;	// Original radio is sending 70 packets
+		FAILSAFE_VALUES_off;
+	}
+	if(fs)
+	{// Failsafe packets
+		switch(phase)
+		{
+			case MLINK_SEND2:
+				packet[0]=0x06;
+				start=17;
+				break;
+			case MLINK_SEND3:
+				packet[0]=0x84;
+				start=5;
+				fs--;
+				break;
+			default: //MLINK_SEND1:
+				packet[0]=0x05;
+				start=11;
+				break;
+		}
+		//Pack 6 channels per packet
+		for(uint8_t i=0;i<6;i++)
+		{
+			uint8_t val=start<16 ? convert_channel_16b_nolimit(start,426 >> 4,3448 >> 4,true) : 0x00;
+			start--;	// switch to next channel
+			packet[i+1]=val;
+		}
+	}
+	else
+#endif
+	{// Normal packets
+		if(hopping_frequency_no==0)
+			tog=1;
+		//Channels to be sent
+		if(phase==MLINK_SEND1 || ((hopping_frequency_no%5==0) && (phase==MLINK_SEND2)))
+		{
+			if((hopping_frequency_no&1)==0)
+				packet[0] = 0x09;	//10,8,6
+			else
+				packet[0] = 0x01;	//11,9,7
+		}
+		else
+			if(phase==MLINK_SEND2)
+			{
+				if(tog)
+					packet[0] = 0x02;	//x,15,13
+				else
+					packet[0] = 0x0A;	//x,14,12
+				tog^=1;
+			}
+			else
+			{//phase==MLINK_SEND3
+				if((hopping_frequency_no&1)==0)
+					packet[0] = 0x88;	//4,2,0
+				else
+					packet[0] = 0x80;	//5,3,1
+			}
+
+		//Start channel
+		start=4+6*(packet[0]&3);
+		if((packet[0]&0x08)==0)
+			start++;
+		
+		//Channels 426..1937..3448
+		for(uint8_t i=0;i<3;i++)
+		{
+			uint16_t val=start<16 ? convert_channel_16b_nolimit(start,426,3448,false) : 0x0000;
+			start-=2;	// switch to next channel
+			packet[i*2+1]=val>>8;
+			packet[i*2+2]=val;
+		}
+	}
+
+	//Calculate CRC
+	crc8=bit_reverse(hopping_frequency_no + MLINK_CRC_Init);	// Init = relected freq index + offset
+	for(uint8_t i=0;i<MLINK_PACKET_SIZE-1;i++)
+		crc8_update(bit_reverse(packet[i]));
+	packet[7] = bit_reverse(crc8);			// CRC reflected out
+
+	//Send
+	CYRF_WriteDataPacketLen(packet, MLINK_PACKET_SIZE);
+
+	//Debug
+	#if 0
+		debug("P(%02d):",hopping_frequency_no);
+		for(uint8_t i=0;i<8;i++)
+			debug(" %02X",packet[i]);
+		debugln("");
+	#endif
+}
+
+#ifdef MLINK_HUB_TELEMETRY
+	static void __attribute__((unused)) MLINK_Send_Telemetry()
+	{ // not sure how MLINK telemetry works, the 2 RXs I have are sending something completly different...
+		telemetry_counter += 2;				// TX LQI counter
+		telemetry_link = 1;
+
+		if(packet_in[0]==0x13)
+		{ // RX-9-DR : 13 1A C8 00 01 64 00
+			uint8_t id;
+			for(uint8_t i=1; i<5; i+=3)
+			{//2 sensors per packet
+				id=0x00;
+				switch(packet_in[i]&0x0F)
+				{
+					case 1: //voltage
+						if((packet_in[i]&0xF0) == 0x00)
+							v_lipo1 = packet_in[i+1];		// Rx_Batt*20
+						else
+							v_lipo2 = packet_in[i+1];
+						break;
+					case 2: //current
+						id = 0x28;
+						break;
+					case 3: //vario
+						id = 0x30;
+						break;
+					case 5: //rpm
+						id = 0x03;
+						break;
+					case 6: //temp
+						id = 0x02;
+						break;
+					case 10: //lqi
+						RX_RSSI=RX_LQI=packet_in[i+1]>>1;
+						break;
+				}
+				#if defined HUB_TELEMETRY
+					if(id)
+					{
+						uint16_t val=((packet_in[i+2]&0x80)<<8)|((packet_in[i+2]&0x7F)<<7)|(packet_in[i+1]>>1);	//remove the alarm LSB bit, move the sign bit to MSB
+						frsky_send_user_frame(id, val, val>>8);
+					}
+				#endif
+			}
+		}
+		else
+			if(packet_in[0]==0x03)
+			{ // RX-5 :    03 15 23 00 00 01 02
+				//Incoming packet values
+				RX_RSSI = packet_in[2]<<1;	// Looks to be the RX RSSI value
+				RX_LQI  = packet_in[5];		// Looks to be connection lost
+			}
+			else
+				RX_RSSI = TX_LQI;
+
+		// Read TX RSSI
+		TX_RSSI = CYRF_ReadRegister(CYRF_13_RSSI)&0x1F;
+
+		if(telemetry_lost)
+		{
+			telemetry_lost = 0;
+			packet_count = 50;
+			telemetry_counter = 100;
+		}
+	}
+#endif
+
+#ifdef MLINK_FW_TELEMETRY
+	static void __attribute__((unused)) MLINK_Send_Telemetry()
+	{
+		telemetry_counter += 2;				// TX LQI counter
+		telemetry_link = 4;
+
+		// Read TX RSSI
+		TX_RSSI = CYRF_ReadRegister(CYRF_13_RSSI)&0x1F;
+
+		if(telemetry_lost)
+		{
+			telemetry_lost = 0;
+			packet_count = 50;
+			telemetry_counter = 100;
+		}
+	}
+#endif
+
+uint16_t MLINK_callback()
+{
+	uint8_t status;
+	uint16_t start;
+
+	switch(phase)
+	{
+		case MLINK_BIND_RX:
+			//debugln("RX");
+			status=CYRF_ReadRegister(CYRF_05_RX_CTRL);
+			if( (status&0x80) == 0 )
+			{//Packet received
+				len=CYRF_ReadRegister(CYRF_09_RX_COUNT);
+				debugln("L=%02X",len)
+				if( len==8 )
+				{
+					CYRF_ReadDataPacketLen(packet, len*2);
+					debug("RX=");
+					for(uint8_t i=0;i<8;i++)
+						debug(" %02X",packet[i*2]);
+					debugln("");
+					//Check CRC
+					crc8=0xFF;	// Init = 0xFF
+					for(uint8_t i=0;i<MLINK_PACKET_SIZE-1;i++)
+						crc8_update(bit_reverse(packet[i<<1]));
+					if(packet[14] == bit_reverse(crc8))
+					{// CRC is ok
+						debugln("CRC ok");
+						if(packet[0]==0x7F)
+							packet_count=3;					// Start sending bind payload
+						else if(packet_count > 0x19*2)
+						{
+							if(packet[0] == 0x8F)
+								packet_count++;
+							else if(packet[0] == 0x9F)
+								packet_count=0x80;			// End bind
+							else
+								packet_count=0;				// Restart bind...
+						}
+					}
+				}
+			}
+			else
+				packet_count=0;
+			CYRF_WriteRegister(CYRF_29_RX_ABORT, 0x20);		// Enable RX abort
+			CYRF_WriteRegister(CYRF_0F_XACT_CFG, 0x24);		// Force end state
+			CYRF_WriteRegister(CYRF_29_RX_ABORT, 0x00);		// Disable RX abort
+			phase=MLINK_BIND_TX;							// Retry sending bind packet
+			CYRF_SetTxRxMode(TX_EN);						// Transmit mode
+			if(packet_count)
+				return 18136;
+		case MLINK_BIND_TX:
+			if(--bind_counter==0 || packet_count>=0x1B*2)
+			{ // Switch to normal mode
+				BIND_DONE;
+				phase=MLINK_PREP_DATA;
+				return 22720;
+			}
+			MLINK_send_bind_packet();
+			if(packet_count == 0 || packet_count > 0x19*2)
+			{
+				phase++;		// MLINK_BIND_PREP_RX
+				return 4700;	// Original is 4900
+			}
+			packet_count++;
+			if(packet_count&1)
+				return 6000;
+			return 22720;
+		case MLINK_BIND_PREP_RX:
+			start=micros();
+			while ((uint16_t)((uint16_t)micros()-(uint16_t)start) < 200)	// Wait max 200µs for TX to finish
+				if((CYRF_ReadRegister(CYRF_02_TX_CTRL) & 0x80) == 0x00)
+					break;										// Packet transmission complete
+			CYRF_SetTxRxMode(RX_EN);							// Receive mode
+			CYRF_WriteRegister(CYRF_05_RX_CTRL, 0x82);			// Prepare to receive
+			phase++;	//MLINK_BIND_RX
+			if(packet_count > 0x19*2)
+				return 28712;									// Give more time to the RX to confirm that the bind is ok...
+			return 28712-4700;
+
+
+		case MLINK_PREP_DATA:
+			CYRF_ConfigDataCode(MLINK_Data_Code,16);
+			MLINK_CRC_Init += 0xED;
+			hopping_frequency_no = 0x00;
+			CYRF_ConfigRFChannel(hopping_frequency[hopping_frequency_no]);
+			CYRF_SetPower(0x38);
+			#if defined(MLINK_HUB_TELEMETRY) || defined(MLINK_FW_TELEMETRY)
+				packet_count = 0;
+				telemetry_lost = 1;
+			#endif
+			phase++;
+
+
+		case MLINK_SEND1:
+			MLINK_send_data_packet();
+			phase++;
+			return 4880+1111;
+		case MLINK_SEND2:
+			MLINK_send_data_packet();
+			phase++;
+			if(hopping_frequency_no%5==0)
+				return 4617+1017;
+			return 4617+1422;
+		case MLINK_SEND3:
+			MLINK_send_data_packet();
+			phase++;
+			return 4611;
+		case MLINK_CHECK3:
+			//Switch to next channel
+			hopping_frequency_no++;
+			if(hopping_frequency_no>=MLINK_NUM_FREQ)
+				hopping_frequency_no=0;
+			CYRF_ConfigRFChannel(hopping_frequency[hopping_frequency_no]);
+			
+			//Receive telemetry
+			if(hopping_frequency_no%5==0)
+			{//Receive telemetry
+				CYRF_SetTxRxMode(RX_EN);							// Receive mode
+				CYRF_WriteRegister(CYRF_05_RX_CTRL, 0x82);			// Prepare to receive
+				phase++;	//MLINK_RX
+				return 8038+2434+410-1000;
+			}
+			else
+				CYRF_SetPower(0x38);
+			phase=MLINK_SEND1;
+			return 4470;
+		case MLINK_RX:
+			#if defined(MLINK_HUB_TELEMETRY) || defined(MLINK_FW_TELEMETRY)
+				//TX LQI calculation
+				packet_count++;
+				if(packet_count>=50)
+				{
+					packet_count=0;
+					TX_LQI=telemetry_counter;
+					if(telemetry_counter==0)
+						telemetry_lost = 1;
+					telemetry_counter = 0;
+				}
+			#endif
+			status=CYRF_ReadRegister(CYRF_05_RX_CTRL);
+			debug("T(%02X):",status);
+			if( (status&0x80) == 0 )
+			{//Packet received
+				len=CYRF_ReadRegister(CYRF_09_RX_COUNT);
+				debug("(%X)",len)
+				if( len && len <= MLINK_PACKET_SIZE )
+				{
+					CYRF_ReadDataPacketLen(packet_in, len*2);
+					#if defined(MLINK_HUB_TELEMETRY) || defined(MLINK_FW_TELEMETRY)
+						if(len==MLINK_PACKET_SIZE)
+						{
+							for(uint8_t i=0;i<8;i++)
+							//Check CRC
+							crc8=bit_reverse(MLINK_CRC_Init);
+							for(uint8_t i=0;i<MLINK_PACKET_SIZE-1;i++)
+							{
+								packet_in[i]=packet_in[i<<1];
+								crc8_update(bit_reverse(packet_in[i]));
+								debug(" %02X",packet_in[i]);
+							}
+							if(packet_in[14] == bit_reverse(crc8))	// Packet CRC is ok
+								MLINK_Send_Telemetry();
+							else
+								debug(" NOK");
+						}
+					#endif
+				}
+			}
+			debugln("");
+			CYRF_WriteRegister(CYRF_29_RX_ABORT, 0x20);		// Enable RX abort
+			CYRF_WriteRegister(CYRF_0F_XACT_CFG, 0x24);		// Force end state
+			CYRF_WriteRegister(CYRF_29_RX_ABORT, 0x00);		// Disable RX abort
+			CYRF_SetTxRxMode(TX_EN);						// Transmit mode
+			phase=MLINK_SEND2;
+			return 1000;
+	}
+	return 1000;
+}
+
+static void __attribute__((unused)) MLINK_shuffle_freqs(uint32_t seed, uint8_t *hop)
+{
+	randomSeed(seed);
+	
+	for(uint8_t i=0; i < MLINK_NUM_FREQ/2; i++)
+	{
+		uint8_t r   = random(0xfefefefe) % (MLINK_NUM_FREQ/2);
+		uint8_t tmp = hop[r];
+		hop[r] = hop[i];
+		hop[i] = tmp;
+	}
+}
+
+void MLINK_init()
+{ 
+	MLINK_cyrf_config();
+
+	//Init ID and RF freqs
+	for(uint8_t i=0; i < MLINK_NUM_FREQ/2; i++)
+	{
+		hopping_frequency[i                 ] = (i<<1) + 3;
+		hopping_frequency[i+MLINK_NUM_FREQ/2] = (i<<1) + 3;
+	}
+	// part1
+	memcpy(MLINK_Data_Code  ,rx_tx_addr,4);
+	MLINK_shuffle_freqs(MProtocol_id, hopping_frequency);
+
+	// part2
+	MProtocol_id ^= 0x6FBE3201;
+	set_rx_tx_addr(MProtocol_id);
+	memcpy(MLINK_Data_Code+4,rx_tx_addr,4);
+	MLINK_shuffle_freqs(MProtocol_id, &hopping_frequency[MLINK_NUM_FREQ/2]);
+	
+	// part3
+	MLINK_CRC_Init = rx_tx_addr[3];		//value sent during bind then used to init the CRC
+	MLINK_Unk_6_2  = 0x3A;		//unknown value sent during bind but doesn't seem to matter
+	
+	#ifdef MLINK_FORCE_ID
+		if(RX_num)
+		{
+			//Cockpit SX
+			memcpy(MLINK_Data_Code,"\x4C\x97\x9D\xBF\xB8\x3D\xB5\xBE",8);
+			memcpy(hopping_frequency,"\x0D\x41\x09\x43\x17\x2D\x05\x31\x13\x3B\x1B\x3D\x0B\x41\x11\x45\x09\x2B\x17\x4D\x19\x3F\x03\x3F\x0F\x37\x1F\x47\x1B\x49\x07\x35\x27\x2F\x15\x33\x23\x39\x1F\x33\x19\x45\x0D\x2D\x11\x35\x0B\x47\x25\x3D\x21\x37\x1D\x3B\x05\x2F\x21\x39\x23\x4B\x03\x31\x25\x29\x07\x4F\x1D\x4B\x15\x4D\x13\x4F\x0F\x49\x29\x2B\x27\x43",MLINK_NUM_FREQ);
+			MLINK_Unk_6_2  = 0x3A;		//unknown value sent during bind but doesn't seem to matter
+			MLINK_CRC_Init = 0x07;		//value sent during bind then used to init the CRC
+		}
+		else
+		{
+			//HFM3
+			memcpy(MLINK_Data_Code,"\xC0\x90\x8F\xBB\x7C\x8E\x2B\x8E",8);
+			memcpy(hopping_frequency,"\x05\x41\x27\x4B\x17\x33\x11\x39\x0F\x3F\x05\x2F\x13\x2D\x25\x31\x1F\x2D\x25\x35\x03\x41\x1B\x43\x09\x3D\x1F\x29\x1D\x35\x0D\x3B\x19\x49\x23\x3B\x17\x47\x1D\x2B\x13\x37\x0B\x31\x23\x33\x29\x3F\x07\x37\x07\x43\x11\x2B\x1B\x39\x0B\x4B\x03\x4F\x21\x47\x0F\x4D\x15\x45\x21\x4F\x09\x3D\x19\x2F\x15\x45\x0D\x49\x27\x4D",MLINK_NUM_FREQ);
+			MLINK_Unk_6_2  = 0x02;		//unknown value but doesn't seem to matter
+			MLINK_CRC_Init = 0x3E;		//value sent during bind then used to init the CRC
+		}
+		//Other TX
+		//MLINK_Unk_6_2  = 0x7e;		//unknown value but doesn't seem to matter
+		//MLINK_CRC_Init = 0xA2;		//value sent during bind then used to init the CRC
+	#endif
+
+	for(uint8_t i=0;i<8;i++)
+		MLINK_Data_Code[i+8]=MLINK_Data_Code[7-i];
+
+	debug("ID:")
+	for(uint8_t i=0;i<16;i++)
+		debug(" %02X", MLINK_Data_Code[i]);
+	debugln("");
+
+	debugln("CRC init: %02X", MLINK_CRC_Init)
+
+	debug("RF:")
+	for(uint8_t i=0;i<MLINK_NUM_FREQ;i++)
+		debug(" %02X", hopping_frequency[i]);
+	debugln("");
+	
+	if(IS_BIND_IN_PROGRESS)
+	{
+		packet_count = 0;
+		bind_counter = MLINK_BIND_COUNT;
+		CYRF_ConfigDataCode((uint8_t*)"\x6F\xBE\x32\x01\xDB\xF1\x2B\x01\xE3\x5C\xFA\x02\x97\x93\xF9\x02",16); //Bind data code
+		CYRF_ConfigRFChannel(MLINK_BIND_CHANNEL);
+		phase = MLINK_BIND_TX;
+	}
+	else
+		phase = MLINK_PREP_DATA;
+}
+
+#endif

Multiprotocol/MT99xx_ccnrf.ino

@@ -0,0 +1,424 @@
+/*
+ This project is free software: you can redistribute it and/or modify
+ it under the terms of the GNU General Public License as published by
+ the Free Software Foundation, either version 3 of the License, or
+ (at your option) any later version.
+
+ Multiprotocol is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ GNU General Public License for more details.
+
+ You should have received a copy of the GNU General Public License
+ along with Multiprotocol.  If not, see <http://www.gnu.org/licenses/>.
+ */
+// compatible with MT99xx, Eachine H7, Yi Zhan i6S and LS114/124
+// Last sync with Goebish mt99xx_nrf24l01.c dated 2016-01-29
+
+#if defined(MT99XX_CCNRF_INO)
+
+#include "iface_xn297.h"
+
+#define MT99XX_BIND_COUNT			928
+#define MT99XX_PACKET_PERIOD_FY805	2460
+#define MT99XX_PACKET_PERIOD_MT		2625
+#define MT99XX_PACKET_PERIOD_YZ		3125
+#define MT99XX_PACKET_PERIOD_A180	3400	// timing changes between the packets 2 x 27220 then 1x 26080, it seems that it is only on the first RF channel which jitters by 1.14ms but hard to pinpoint with XN297dump
+#define MT99XX_PACKET_PERIOD_DRAGON	1038	// there is a pause of 2x1038 between two packets, no idea why and how since it is not even stable on a same dump...
+#define MT99XX_PACKET_PERIOD_DRAGON_TELEM	10265	// long pause to receive the telemetry packets, 3 are sent by the RX one after the other
+#define MT99XX_INITIAL_WAIT			500
+#define MT99XX_PACKET_SIZE			9
+
+//#define FORCE_A180_ID
+//#define FORCE_DRAGON_ID
+
+enum {
+    MT99XX_DATA,
+    MT99XX_RX,
+    MT99XX_CHECK,
+};
+
+enum{
+    // flags going to packet[6] (MT99xx, H7)
+    FLAG_MT_RATE1   = 0x01, // (H7 & A180 high rate)
+    FLAG_MT_RATE2   = 0x02, // (MT9916 only)
+    FLAG_MT_VIDEO   = 0x10,
+    FLAG_MT_SNAPSHOT= 0x20,
+    FLAG_MT_FLIP    = 0x80,
+};
+
+enum{
+    // flags going to packet[6] (LS)
+    FLAG_LS_INVERT  = 0x01,
+    FLAG_LS_RATE    = 0x02,
+    FLAG_LS_HEADLESS= 0x10,
+    FLAG_LS_SNAPSHOT= 0x20,
+    FLAG_LS_VIDEO   = 0x40,
+    FLAG_LS_FLIP    = 0x80,
+};
+
+enum{
+    // flags going to packet[7] (FY805)
+    FLAG_FY805_HEADLESS= 0x10,
+};
+
+enum{
+    // flags going to packet[6] (A180)
+    FLAG_A180_3D6G	= 0x01,
+    FLAG_A180_RATE	= 0x02,
+};
+
+enum{
+    // flags going to packet[6] (DRAGON)
+    FLAG_DRAGON_RATE	= 0x01,
+    FLAG_DRAGON_RTH		= 0x80,
+    FLAG_DRAGON_UNK		= 0x04,
+};
+
+const uint8_t h7_mys_byte[] = {
+	0x01, 0x11, 0x02, 0x12, 0x03, 0x13, 0x04, 0x14, 
+	0x05, 0x15, 0x06, 0x16, 0x07, 0x17, 0x00, 0x10
+};
+
+const uint8_t ls_mys_byte[] = {
+	0x05, 0x15, 0x25, 0x06, 0x16, 0x26,
+	0x07, 0x17, 0x27, 0x00, 0x10, 0x20,
+	0x01, 0x11, 0x21, 0x02, 0x12, 0x22,
+	0x03, 0x13, 0x23, 0x04, 0x14, 0x24
+};
+
+const uint8_t yz_p4_seq[] = {0xa0, 0x20, 0x60};
+
+#ifdef MT99XX_HUB_TELEMETRY
+	const uint8_t DRAGON_seq[] = {0x20, 0x60, 0x20, 0x80};
+#endif
+
+static void __attribute__((unused)) MT99XX_send_packet()
+{
+	static uint8_t seq_num=0;
+
+	if(IS_BIND_IN_PROGRESS)
+	{
+		//Bind packet
+		packet[0] = 0x20;
+		switch(sub_protocol)
+		{
+			case YZ:
+				packet_period = MT99XX_PACKET_PERIOD_YZ;
+				packet[1] = 0x15;
+				packet[2] = 0x05;
+				packet[3] = 0x06;
+				break;
+			case LS:
+				packet[1] = 0x14;
+				packet[2] = 0x05;
+				packet[3] = 0x11;
+				break;
+			case FY805:
+				packet_period = MT99XX_PACKET_PERIOD_FY805;
+				packet[1] = 0x15;
+				packet[2] = 0x12;
+				packet[3] = 0x17;
+				break;
+			case A180:
+				packet_period = MT99XX_PACKET_PERIOD_A180;
+			default:	// MT99 & H7 & A180 & DRAGON
+				packet[1] = 0x14;
+				packet[2] = 0x03;
+				packet[3] = 0x25;
+				break;
+		}
+		packet[4] = rx_tx_addr[0];
+		packet[5] = rx_tx_addr[1];
+		packet[6] = rx_tx_addr[2];
+		packet[7] = crc8;												// checksum offset
+		packet[8] = 0xAA;												// fixed
+	}
+	else
+	{
+		if(sub_protocol != YZ)
+		{ // MT99XX & H7 & LS & FY805 & A180 & DRAGON
+			packet[0] = convert_channel_16b_limit(THROTTLE,0xE1,0x00);	// throttle
+			packet[1] = convert_channel_16b_limit(RUDDER  ,0x00,0xE1);	// rudder
+			packet[2] = convert_channel_16b_limit(AILERON ,0xE1,0x00);	// aileron
+			packet[3] = convert_channel_16b_limit(ELEVATOR,0x00,0xE1);	// elevator
+			packet[4] = 0x20; 											// pitch trim (0x3f-0x20-0x00)
+			packet[5] = 0x20; 											// roll trim (0x00-0x20-0x3f)
+			packet[6] = GET_FLAG( CH5_SW, FLAG_MT_FLIP );
+			packet[7] = h7_mys_byte[hopping_frequency_no];				// next rf channel index ?
+
+			switch(sub_protocol)
+			{
+				case MT99:
+					packet[6] |= 0x40 | FLAG_MT_RATE2					// max rate on MT99xx
+					  | GET_FLAG( CH7_SW, FLAG_MT_SNAPSHOT )
+					  | GET_FLAG( CH8_SW, FLAG_MT_VIDEO );
+					break;
+				case H7:
+					packet[6] |= FLAG_MT_RATE1; 						// max rate on H7
+					break;
+				case LS:
+					packet[6] |= FLAG_LS_RATE							// max rate
+						| GET_FLAG( CH6_SW, FLAG_LS_INVERT )			// invert
+						| GET_FLAG( CH7_SW, FLAG_LS_SNAPSHOT )			// snapshot
+						| GET_FLAG( CH8_SW, FLAG_LS_VIDEO )				// video
+						| GET_FLAG( CH9_SW, FLAG_LS_HEADLESS );			// Headless
+					packet[7] = ls_mys_byte[seq_num++];
+					if(seq_num >= sizeof(ls_mys_byte))
+						seq_num=0;
+					break;
+				case FY805:
+					packet[6]=0x20;
+					//Rate 0x01?
+					//Flip ?
+					packet[7]=0x01
+						|GET_FLAG( CH5_SW, FLAG_MT_FLIP )
+						|GET_FLAG( CH9_SW, FLAG_FY805_HEADLESS );		//HEADLESS
+					crc8=0;
+					break;
+				case A180:
+					packet[6] = FLAG_A180_RATE
+						| GET_FLAG( CH5_SW, FLAG_A180_3D6G );
+					packet[7] = 0x00;
+					break;
+				case DRAGON:
+					if(CH5_SW)										// Advanced mode
+						packet[5] |= 0x80;
+					else
+						if(Channel_data[CH5] > CHANNEL_MIN_COMMAND)	// Beginner mode
+							packet[5] |= 0x40;
+					packet[6] = FLAG_DRAGON_RATE
+						| GET_FLAG( CH6_SW, FLAG_DRAGON_RTH );
+					
+					#ifdef MT99XX_HUB_TELEMETRY
+						//Telemetry
+						if(hopping_frequency_no == 0)
+						{
+							seq_num++;
+							seq_num &= 0x03;
+							packet_count++;
+							if(packet_count > 11)
+								packet_count = 0;
+						}
+						if(packet_count > 10)						// Telemetry packet request every 10 or 11 packets
+						{
+							packet[6] |= 0x04;						// Request telemetry flag
+							phase = MT99XX_RX;
+						}
+						packet[7] = DRAGON_seq[seq_num];			// seq: 20 80 20 60 20 80 20 60... 80 changes to 80+batt from telem
+						if(seq_num==3)
+							packet[7] |= v_lipo1;
+					#else
+						packet[7] = 0x20;
+					#endif
+					break;
+			}
+			uint8_t result=crc8;
+			for(uint8_t i=0; i<8; i++)
+				result += packet[i];
+			packet[8] = result;
+		}
+		else
+		{ // YZ
+			packet[0] = convert_channel_16b_limit(THROTTLE,0x00,0x64);	// throttle
+			packet[1] = convert_channel_16b_limit(RUDDER  ,0x64,0x00);	// rudder
+			packet[2] = convert_channel_16b_limit(ELEVATOR,0x00,0x64);	// elevator
+			packet[3] = convert_channel_16b_limit(AILERON ,0x64,0x00);	// aileron
+			if(packet_count++ >= 23)
+			{
+				seq_num ++;
+				if(seq_num > 2)
+					seq_num = 0;
+				packet_count=0;
+			}
+			packet[4] = yz_p4_seq[seq_num];
+			packet[5] = 0x02 // expert ? (0=unarmed, 1=normal)
+						| GET_FLAG(CH8_SW, 0x10)		//VIDEO
+						| GET_FLAG(CH5_SW, 0x80)		//FLIP
+						| GET_FLAG(CH9_SW, 0x04)		//HEADLESS
+						| GET_FLAG(CH7_SW, 0x20);		//SNAPSHOT
+			packet[6] =   GET_FLAG(CH6_SW, 0x80);		//LED
+			packet[7] = packet[0];            
+			for(uint8_t idx = 1; idx < MT99XX_PACKET_SIZE-2; idx++)
+				packet[7] += packet[idx];
+			packet[8] = 0xff;
+		}
+	}
+
+	//RF freq
+	if(sub_protocol == LS)
+		XN297_RFChannel(0x2D); // LS always transmits on the same channel
+	else
+		if(sub_protocol==FY805)
+			XN297_RFChannel(0x4B); // FY805 always transmits on the same channel
+		else // MT99 & H7 & YZ & A180 & DRAGON
+			XN297_Hopping(hopping_frequency_no);
+
+	hopping_frequency_no++;
+	if(sub_protocol == YZ || sub_protocol == A180 || sub_protocol == DRAGON )
+		hopping_frequency_no++; // skip every other channel
+	if(hopping_frequency_no > 15)
+		hopping_frequency_no = 0;
+
+	// Send
+	XN297_SetPower();
+	XN297_SetFreqOffset();
+	XN297_SetTxRxMode(TX_EN);
+	XN297_WritePayload(packet, MT99XX_PACKET_SIZE);
+}
+
+static void __attribute__((unused)) MT99XX_RF_init()
+{
+    if(sub_protocol == YZ)
+		XN297_Configure(XN297_CRCEN, XN297_UNSCRAMBLED, XN297_250K);
+	else
+		XN297_Configure(XN297_CRCEN, XN297_SCRAMBLED, XN297_1M);
+    XN297_SetTXAddr((uint8_t *)"\xCC\xCC\xCC\xCC\xCC", 5);
+	XN297_HoppingCalib(16);
+	#ifdef MT99XX_HUB_TELEMETRY
+		XN297_SetRXAddr(rx_tx_addr, MT99XX_PACKET_SIZE);
+	#endif
+
+}
+
+static void __attribute__((unused)) MT99XX_initialize_txid()
+{
+	rx_tx_addr[1] = rx_tx_addr[3]; // RX_Num
+
+	switch(protocol)
+	{
+		case YZ:
+			rx_tx_addr[0] = 0x53;	// test (SB id)
+			rx_tx_addr[1] = 0x00;
+			rx_tx_addr[2] = 0x00;
+			break;
+		case FY805:
+			rx_tx_addr[0] = 0x81;	// test (SB id)
+			rx_tx_addr[1] = 0x0F;
+			rx_tx_addr[2] = 0x00;
+			break;
+		case LS:
+			rx_tx_addr[0] = 0xCC;
+			break;
+	#ifdef FORCE_A180_ID
+		case A180:
+			rx_tx_addr[0] = 0x84;	// MikeHRC ID
+			rx_tx_addr[1] = 0x62;
+			rx_tx_addr[2] = 0x4A;
+			//crc8 = 0x30
+			//channel_offset  = 0x03;
+			break;
+	#endif
+	#ifdef FORCE_DRAGON_ID
+		case DRAGON:
+			rx_tx_addr[0] = 0x6C;	// Laurie ID
+			rx_tx_addr[1] = 0x00;
+			rx_tx_addr[2] = 0x22;
+			//crc8 = 0x8E
+			//channel_offset  = 0x06
+			break;
+	#endif
+		default: //MT99 & H7 & A180 & DRAGON
+			rx_tx_addr[2] = 0x00;
+			break;
+	}
+	
+	rx_tx_addr[3] = 0xCC;
+	rx_tx_addr[4] = 0xCC;
+
+	crc8 = rx_tx_addr[0] + rx_tx_addr[1] + rx_tx_addr[2];
+
+	//memcpy(hopping_frequency,"\x02\x48\x0C\x3e\x16\x34\x20\x2A\x2A\x20\x34\x16\x3e\x0c\x48\x02",16);
+	for(uint8_t i=0; i<8; i++)
+	{
+		hopping_frequency[(i<<1)  ]=0x02 + (10*i);
+		hopping_frequency[(i<<1)+1]=0x48 - (10*i);
+	}
+	hopping_frequency_no=0;
+}
+
+uint16_t MT99XX_callback()
+{
+	switch(phase)
+	{
+		case MT99XX_DATA:
+			#ifdef MULTI_SYNC
+				telemetry_set_input_sync(packet_period);
+			#endif
+			if(bind_counter)
+			{
+				bind_counter--;
+				if (bind_counter == 0)
+				{
+					// set tx address for data packets
+					XN297_SetTXAddr(rx_tx_addr, 5);
+					// set rf channels
+					uint8_t channel_offset = ((crc8>>4) + (crc8 & 0x0f)) % 8;
+					for(uint8_t i=0;i<16;i++)
+						hopping_frequency[i] += channel_offset;
+					XN297_HoppingCalib(16);
+					BIND_DONE;
+				}
+			}
+			MT99XX_send_packet();
+			break;
+		#ifdef MT99XX_HUB_TELEMETRY
+		case MT99XX_RX:
+			//Switch to RX
+			XN297_SetTxRxMode(TXRX_OFF);
+			XN297_SetTxRxMode(RX_EN);
+			phase++;
+			return MT99XX_PACKET_PERIOD_DRAGON_TELEM - MT99XX_PACKET_PERIOD_DRAGON - 500;
+		case MT99XX_CHECK:
+			//Check telem
+			if(XN297_IsRX())
+			{
+				//debug("RX");
+				if(XN297_ReadPayload(packet_in, MT99XX_PACKET_SIZE))
+				{
+					// C=48 S=Y A= 6C 00 22 CC CC P(9)= 6C 00 22 27 00 00 00 00 60
+					// C=48 S=Y A= 6C 00 22 CC CC P(9)= 6C 00 22 28 00 00 00 00 61
+					// C=18 S=Y A= 6C 00 22 CC CC P(9)= 6C 00 22 24 00 00 00 00 5D
+					// 6C 00 22 = TX address, 27/28/24=vbatt, check = sum(P[0..7]) + AB
+					// D2 EE 00 25 00 00 00 00 90 -> check also + AB
+					//for(uint8_t i=0; i<MT99XX_PACKET_SIZE; i++)
+					//	debug(" %02X",packet_in[i]);
+					uint8_t check=0xAB;
+					for(uint8_t i=0; i<8; i++)
+						check += packet_in[i];
+					if(packet_in[8] == check && packet_in[0] == rx_tx_addr[0] && packet_in[1] == rx_tx_addr[1] && packet_in[2] == rx_tx_addr[2])
+					{ // checksum and address are ok
+					//	debug(" OK");
+						v_lipo1 = packet_in[3] & 0x7F;	// Batt
+						v_lipo2 = packet_in[3] & 0x80;	// Low batt flag
+						RX_RSSI=100;
+						telemetry_link = 1;
+					}
+				}
+				//debugln("");
+			}
+			//Switch to TX
+			XN297_SetTxRxMode(TXRX_OFF);
+			XN297_SetTxRxMode(TX_EN);
+			phase=MT99XX_DATA;
+			return 500;
+		#endif
+	}
+	return packet_period;
+}
+
+void MT99XX_init(void)
+{
+	if(sub_protocol != A180 && sub_protocol != DRAGON)
+		BIND_IN_PROGRESS;	// autobind protocol
+    bind_counter = MT99XX_BIND_COUNT;
+
+	MT99XX_initialize_txid();
+	MT99XX_RF_init();
+
+	packet_period = MT99XX_PACKET_PERIOD_MT;
+
+	packet_count=0;
+	phase=MT99XX_DATA;
+}
+#endif

Multiprotocol/MT99xx_nrf24l01.ino

@@ -1,310 +0,0 @@
-/*
- This project is free software: you can redistribute it and/or modify
- it under the terms of the GNU General Public License as published by
- the Free Software Foundation, either version 3 of the License, or
- (at your option) any later version.
-
- Multiprotocol is distributed in the hope that it will be useful,
- but WITHOUT ANY WARRANTY; without even the implied warranty of
- MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- GNU General Public License for more details.
-
- You should have received a copy of the GNU General Public License
- along with Multiprotocol.  If not, see <http://www.gnu.org/licenses/>.
- */
-// compatible with MT99xx, Eachine H7, Yi Zhan i6S and LS114/124
-// Last sync with Goebish mt99xx_nrf24l01.c dated 2016-01-29
-
-#if defined(MT99XX_NRF24L01_INO)
-
-#include "iface_nrf24l01.h"
-
-#define MT99XX_BIND_COUNT		928
-#define MT99XX_PACKET_PERIOD_FY805 2460
-#define MT99XX_PACKET_PERIOD_MT 2625
-#define MT99XX_PACKET_PERIOD_YZ 3125
-#define MT99XX_INITIAL_WAIT     500
-#define MT99XX_PACKET_SIZE		9
-
-#define checksum_offset	rf_ch_num
-#define channel_offset	phase
-
-enum{
-    // flags going to packet[6] (MT99xx, H7)
-    FLAG_MT_RATE1   = 0x01, // (H7 high rate)
-    FLAG_MT_RATE2   = 0x02, // (MT9916 only)
-    FLAG_MT_VIDEO   = 0x10,
-    FLAG_MT_SNAPSHOT= 0x20,
-    FLAG_MT_FLIP    = 0x80,
-};
-
-enum{
-    // flags going to packet[6] (LS)
-    FLAG_LS_INVERT  = 0x01,
-    FLAG_LS_RATE    = 0x02,
-    FLAG_LS_HEADLESS= 0x10,
-    FLAG_LS_SNAPSHOT= 0x20,
-    FLAG_LS_VIDEO   = 0x40,
-    FLAG_LS_FLIP    = 0x80,
-};
-
-enum{
-    // flags going to packet[7] (FY805)
-    FLAG_FY805_HEADLESS= 0x10,
-};
-
-enum {
-    MT99XX_INIT = 0,
-    MT99XX_BIND,
-    MT99XX_DATA
-};
-
-const uint8_t h7_mys_byte[] = {
-	0x01, 0x11, 0x02, 0x12, 0x03, 0x13, 0x04, 0x14, 
-	0x05, 0x15, 0x06, 0x16, 0x07, 0x17, 0x00, 0x10
-};
-
-static const uint8_t ls_mys_byte[] = {
-	0x05, 0x15, 0x25, 0x06, 0x16, 0x26,
-	0x07, 0x17, 0x27, 0x00, 0x10, 0x20,
-	0x01, 0x11, 0x21, 0x02, 0x12, 0x22,
-	0x03, 0x13, 0x23, 0x04, 0x14, 0x24
-};
-
-static void __attribute__((unused)) MT99XX_send_packet()
-{
-	const uint8_t yz_p4_seq[] = {0xa0, 0x20, 0x60};
-	static uint8_t yz_seq_num=0;
-	static uint8_t ls_counter=0;
-
-	if(sub_protocol != YZ)
-	{ // MT99XX & H7 & LS
-		packet[0] = convert_channel_16b_limit(THROTTLE,0xE1,0x00); // throttle
-		packet[1] = convert_channel_16b_limit(RUDDER  ,0x00,0xE1); // rudder
-		packet[2] = convert_channel_16b_limit(AILERON ,0xE1,0x00); // aileron
-		packet[3] = convert_channel_16b_limit(ELEVATOR,0x00,0xE1); // elevator
-		packet[4] = 0x20; // pitch trim (0x3f-0x20-0x00)
-		packet[5] = 0x20; // roll trim (0x00-0x20-0x3f)
-		packet[6] = GET_FLAG( CH5_SW, FLAG_MT_FLIP );
-		packet[7] = h7_mys_byte[hopping_frequency_no];		// next rf channel index ?
-
-		if(sub_protocol==H7)
-			packet[6]|=FLAG_MT_RATE1; // max rate on H7
-		else
-			if(sub_protocol==MT99)
-				packet[6] |= 0x40 | FLAG_MT_RATE2
-				  | GET_FLAG( CH7_SW, FLAG_MT_SNAPSHOT )
-				  | GET_FLAG( CH8_SW, FLAG_MT_VIDEO );	// max rate on MT99xx
-			else
-				if(sub_protocol==FY805)
-				{
-					packet[6]=0x20;
-					//Rate 0x01?
-					//Flip ?
-					packet[7]=0x01
-						|GET_FLAG( CH5_SW, FLAG_MT_FLIP )
-						|GET_FLAG( CH9_SW, FLAG_FY805_HEADLESS );	//HEADLESS
-					checksum_offset=0;
-				}
-				else //LS
-				{
-					packet[6] |= FLAG_LS_RATE							// max rate
-						| GET_FLAG( CH6_SW, FLAG_LS_INVERT )		//INVERT
-						| GET_FLAG( CH7_SW, FLAG_LS_SNAPSHOT )		//SNAPSHOT
-						| GET_FLAG( CH8_SW, FLAG_LS_VIDEO )			//VIDEO
-						| GET_FLAG( CH9_SW, FLAG_LS_HEADLESS );		//HEADLESS
-					packet[7] = ls_mys_byte[ls_counter++];
-					if(ls_counter >= sizeof(ls_mys_byte))
-						ls_counter=0;
-				}
-
-		uint8_t result=checksum_offset;
-		for(uint8_t i=0; i<8; i++)
-			result += packet[i];
-		packet[8] = result;
-	}
-	else
-	{ // YZ
-		packet[0] = convert_channel_16b_limit(THROTTLE,0x00,0x64); // throttle
-		packet[1] = convert_channel_16b_limit(RUDDER  ,0x64,0x00); // rudder
-		packet[2] = convert_channel_16b_limit(ELEVATOR,0x00,0x64); // elevator
-		packet[3] = convert_channel_16b_limit(AILERON ,0x64,0x00); // aileron
-		if(packet_count++ >= 23)
-		{
-			yz_seq_num ++;
-			if(yz_seq_num > 2)
-				yz_seq_num = 0;
-			packet_count=0;
-		}
-		packet[4] = yz_p4_seq[yz_seq_num]; 
-		packet[5] = 0x02 // expert ? (0=unarmed, 1=normal)
-					| GET_FLAG(CH8_SW, 0x10)		//VIDEO
-					| GET_FLAG(CH5_SW, 0x80)		//FLIP
-					| GET_FLAG(CH9_SW, 0x04)		//HEADLESS
-					| GET_FLAG(CH7_SW, 0x20);		//SNAPSHOT
-		packet[6] =   GET_FLAG(CH6_SW, 0x80);		//LED
-		packet[7] = packet[0];            
-		for(uint8_t idx = 1; idx < MT99XX_PACKET_SIZE-2; idx++)
-			packet[7] += packet[idx];
-		packet[8] = 0xff;
-	}
-
-	if(sub_protocol == LS)
-		NRF24L01_WriteReg(NRF24L01_05_RF_CH, 0x2D); // LS always transmits on the same channel
-	else
-		if(sub_protocol==FY805)
-			NRF24L01_WriteReg(NRF24L01_05_RF_CH, 0x4B); // FY805 always transmits on the same channel
-		else
-			NRF24L01_WriteReg(NRF24L01_05_RF_CH, hopping_frequency[hopping_frequency_no] + channel_offset);
-	NRF24L01_WriteReg(NRF24L01_07_STATUS, 0x70);
-	NRF24L01_FlushTx();
-	XN297_WritePayload(packet, MT99XX_PACKET_SIZE);
-
-	hopping_frequency_no++;
-	if(sub_protocol == YZ)
-		hopping_frequency_no++; // skip every other channel
-
-	if(hopping_frequency_no > 15)
-		hopping_frequency_no = 0;
-
-	NRF24L01_SetPower();
-}
-
-static void __attribute__((unused)) MT99XX_init()
-{
-    NRF24L01_Initialize();
-    if(sub_protocol == YZ)
-		XN297_SetScrambledMode(XN297_UNSCRAMBLED);
-    NRF24L01_SetTxRxMode(TX_EN);
-    NRF24L01_FlushTx();
-    XN297_SetTXAddr((uint8_t *)"\xCC\xCC\xCC\xCC\xCC", 5);
-    NRF24L01_WriteReg(NRF24L01_07_STATUS, 0x70);		// Clear data ready, data sent, and retransmit
-    NRF24L01_WriteReg(NRF24L01_01_EN_AA, 0x00);			// No Auto Acknowldgement on all data pipes
-    NRF24L01_WriteReg(NRF24L01_02_EN_RXADDR, 0x01);		// Enable data pipe 0 only
-    NRF24L01_WriteReg(NRF24L01_03_SETUP_AW, 0x03);		// 5 bytes address
-    NRF24L01_WriteReg(NRF24L01_04_SETUP_RETR, 0x00);	// no auto retransmit
-    if(sub_protocol == YZ)
-        NRF24L01_SetBitrate(NRF24L01_BR_250K);			// 250Kbps (nRF24L01+ only)
-    else
-        NRF24L01_SetBitrate(NRF24L01_BR_1M);          // 1Mbps
-    NRF24L01_SetPower();
-	
-    XN297_Configure(_BV(NRF24L01_00_EN_CRC) | _BV(NRF24L01_00_CRCO) | _BV(NRF24L01_00_PWR_UP) );
-	
-}
-
-static void __attribute__((unused)) MT99XX_initialize_txid()
-{
-	rx_tx_addr[3] = 0xCC;
-	rx_tx_addr[4] = 0xCC;
-    if(sub_protocol == YZ)
-	{
-		rx_tx_addr[0] = 0x53; // test (SB id)
-		rx_tx_addr[1] = 0x00;
-		rx_tx_addr[2] = 0x00;
-	}
-	else
-		if(sub_protocol == FY805)
-		{
-			rx_tx_addr[0] = 0x81; // test (SB id)
-			rx_tx_addr[1] = 0x0F;
-			rx_tx_addr[2] = 0x00;
-		}
-		else
-			if(sub_protocol == LS)
-				rx_tx_addr[0] = 0xCC;
-			else //MT99 & H7
-				rx_tx_addr[2] = 0x00;
-	checksum_offset = rx_tx_addr[0] + rx_tx_addr[1] + rx_tx_addr[2];
-	channel_offset = (((checksum_offset & 0xf0)>>4) + (checksum_offset & 0x0f)) % 8;
-}
-
-uint16_t MT99XX_callback()
-{
-	if(IS_BIND_DONE)
-	{
-		#ifdef MULTI_SYNC
-			telemetry_set_input_sync(packet_period);
-		#endif
-		MT99XX_send_packet();
-	}
-	else
-	{
-		if (bind_counter == 0)
-		{
-            // set tx address for data packets
-            XN297_SetTXAddr(rx_tx_addr, 5);
-			BIND_DONE;
-		}
-		else
-		{
-			if(sub_protocol == LS)
-				NRF24L01_WriteReg(NRF24L01_05_RF_CH, 0x2D); // LS always transmits on the same channel
-			else
-				if(sub_protocol==FY805)
-					NRF24L01_WriteReg(NRF24L01_05_RF_CH, 0x4B); // FY805 always transmits on the same channel
-				else
-					NRF24L01_WriteReg(NRF24L01_05_RF_CH, hopping_frequency[hopping_frequency_no]);
-			NRF24L01_WriteReg(NRF24L01_07_STATUS, 0x70);
-			NRF24L01_FlushTx();
-			XN297_WritePayload(packet, MT99XX_PACKET_SIZE); // bind packet
-			hopping_frequency_no++;
-			if(sub_protocol == YZ)
-				hopping_frequency_no++; // skip every other channel
-			if(hopping_frequency_no > 15)
-				hopping_frequency_no = 0;
-			bind_counter--;
-		}
-	}
-
-    return packet_period;
-}
-
-uint16_t initMT99XX(void)
-{
-	BIND_IN_PROGRESS;	// autobind protocol
-    bind_counter = MT99XX_BIND_COUNT;
-
-	memcpy(hopping_frequency,"\x02\x48\x0C\x3e\x16\x34\x20\x2A\x2A\x20\x34\x16\x3e\x0c\x48\x02",16);
-	hopping_frequency_no=0;
-	
-	MT99XX_initialize_txid();
-	MT99XX_init();
-
-	packet[0] = 0x20;
-	packet_period = MT99XX_PACKET_PERIOD_MT;
-	switch(sub_protocol)
-	{ // MT99 & H7
-		case MT99:
-		case H7:
-			packet[1] = 0x14;
-			packet[2] = 0x03;
-			packet[3] = 0x25;
-			break;
-		case YZ:
-			packet_period = MT99XX_PACKET_PERIOD_YZ;
-			packet[1] = 0x15;
-			packet[2] = 0x05;
-			packet[3] = 0x06;
-			break;
-		case LS:
-			packet[1] = 0x14;
-			packet[2] = 0x05;
-			packet[3] = 0x11;
-			break;
-		case FY805:
-			packet_period = MT99XX_PACKET_PERIOD_FY805;
-			packet[1] = 0x15;
-			packet[2] = 0x12;
-			packet[3] = 0x17;
-			break;
-	}
-	packet[4] = rx_tx_addr[0];
-	packet[5] = rx_tx_addr[1];
-	packet[6] = rx_tx_addr[2];
-    packet[7] = checksum_offset; // checksum offset
-    packet[8] = 0xAA;			// fixed
-	packet_count=0;
-	return	MT99XX_INITIAL_WAIT+MT99XX_PACKET_PERIOD_MT;
-}
-#endif

Multiprotocol/MouldKg_nrf24l01.ino

@@ -0,0 +1,241 @@
+/*
+ This project is free software: you can redistribute it and/or modify
+ it under the terms of the GNU General Public License as published by
+ the Free Software Foundation, either version 3 of the License, or
+ (at your option) any later version.
+
+Multiprotocol is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ GNU General Public License for more details.
+
+ You should have received a copy of the GNU General Public License
+ along with Multiprotocol.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#if defined(MOULDKG_NRF24L01_INO)
+
+#include "iface_xn297.h"
+
+//#define FORCE_MOULDKG_ORIGINAL_ID
+
+#define MOULDKG_PACKET_PERIOD		5000
+#define MOULDKG_BIND_PACKET_PERIOD	12000
+#define MOULDKG_TX_BIND_CHANNEL		11
+#define MOULDKG_RX_BIND_CHANNEL		76
+#define MOULDKG_PAYLOAD_SIZE_DIGIT	5
+#define MOULDKG_PAYLOAD_SIZE_ANALOG	10
+#define MOULDKG_BIND_PAYLOAD_SIZE	7
+#define MOULDKG_BIND_COUNT			300
+#define MOULDKG_RF_NUM_CHANNELS		4
+
+enum {
+	MOULDKG_BINDTX=0,
+	MOULDKG_BINDRX,
+	MOULDKG_PREP_DATA,
+	MOULDKG_PREP_DATA1,
+	MOULDKG_DATA,
+};
+
+uint8_t MOULDKG_RX_id[4*3];
+
+static void __attribute__((unused)) MOULDKG_send_packet()
+{
+	uint8_t len = MOULDKG_BIND_PAYLOAD_SIZE;
+	memcpy(&packet[1],rx_tx_addr,3);
+	if(IS_BIND_IN_PROGRESS)
+	{
+		packet[0] = 0xC0;
+		memset(&packet[4], 0x00, 3);
+	}
+	else
+	{
+		uint8_t n = num_ch<<2;
+		if(sub_protocol == MOULDKG_ANALOG)
+		{
+			packet[0] = 0x36;
+			uint8_t ch[]={ 1,0,2,3 };
+			for(uint8_t i=0;i<4;i++)
+				packet[i+4] = convert_channel_8b(ch[i]+n);
+			len = MOULDKG_PAYLOAD_SIZE_ANALOG;
+		}
+		else
+		{//DIGIT
+			len = MOULDKG_PAYLOAD_SIZE_DIGIT;
+			uint8_t val=0;
+			if(packet_count&1)
+			{
+				packet[0] = 0x31;
+				//Button B
+				if(Channel_data[CH2+n]>CHANNEL_MAX_COMMAND) val |= 0x40;
+				else if(Channel_data[CH2+n]<CHANNEL_MIN_COMMAND) val |= 0x80;
+				//Button C
+				if(Channel_data[CH3+n]>CHANNEL_MAX_COMMAND) val |= 0x10;
+				else if(Channel_data[CH3+n]<CHANNEL_MIN_COMMAND) val |= 0x20;
+			}
+			else
+			{
+				packet[0] = 0x30;
+				val = 0x60;
+				//	| GET_FLAG(CH5_SW, 0x80)	// Button E
+				//	| GET_FLAG(CH6_SW, 0x10);	// Button F
+			}
+			//Button A
+			if(Channel_data[CH1+n]>CHANNEL_MAX_COMMAND) val |= 0x01;
+			else if(Channel_data[CH1+n]<CHANNEL_MIN_COMMAND) val |= 0x02;
+			//Button D
+			if(Channel_data[CH4+n]>CHANNEL_MAX_COMMAND) val |= 0x04;
+			else if(Channel_data[CH4+n]<CHANNEL_MIN_COMMAND) val |= 0x08;
+			packet[4]= val;
+		}
+	}
+
+	// Send
+	XN297_SetPower();
+	XN297_SetTxRxMode(TX_EN);
+	XN297_WritePayload(packet, len);
+	#if 0
+		for(uint8_t i=0; i < len; i++)
+			debug("%02X ", packet[i]);
+		debugln();
+	#endif
+}
+
+static void __attribute__((unused)) MOULDKG_initialize_txid()
+{
+	//rx_tx_addr[0] = rx_tx_addr[3];	// Use RX_num;
+
+	#ifdef FORCE_MOULDKG_ORIGINAL_ID
+		rx_tx_addr[0]=0x57;
+		rx_tx_addr[1]=0x1B;
+		rx_tx_addr[2]=0xF8;
+	#endif
+}
+
+static void __attribute__((unused)) MOULDKG_RF_init()
+{
+	XN297_Configure(XN297_CRCEN, XN297_SCRAMBLED, XN297_1M);
+	XN297_SetTXAddr((uint8_t*)"KDH", 3);
+	XN297_SetRXAddr((uint8_t*)"KDH", MOULDKG_BIND_PAYLOAD_SIZE);
+}
+
+uint16_t MOULDKG_callback()
+{
+	uint8_t rf,n;
+	uint16_t addr;
+	switch(phase)
+	{
+		case MOULDKG_BINDTX:
+			if(XN297_IsRX())
+			{
+				//Example:	TX: C=11 S=Y A= 4B 44 48 P(7)= C0 37 02 4F 00 00 00
+				//			RX: C=76 S=Y A= 4B 44 48 P(7)= 5A 37 02 4F 03 0D 8E
+				// 03 0D 8E => RF channels 0F,1C,39,3C
+				XN297_ReadPayload(packet_in, MOULDKG_BIND_PAYLOAD_SIZE);
+				for(uint8_t i=0; i < MOULDKG_BIND_PAYLOAD_SIZE; i++)
+					debug("%02X ", packet_in[i]);
+				debugln();
+				//Not sure if I should test packet_in[0]
+				if(memcmp(&packet_in[1],&packet[1],3)==0)
+				{//TX ID match
+					if(option == 0)
+					{
+						memcpy(MOULDKG_RX_id,&packet_in[4],3);
+						phase = MOULDKG_PREP_DATA1;
+					}
+					else
+					{// Store RX ID
+						addr=MOULDKG_EEPROM_OFFSET+RX_num*3;
+						for(uint8_t i=0;i<3;i++)
+							eeprom_write_byte((EE_ADDR)(addr+i),packet_in[4+i]);
+						phase = MOULDKG_PREP_DATA;
+					}
+					break;
+				}
+			}
+			XN297_RFChannel(MOULDKG_TX_BIND_CHANNEL);	// Set TX bind channel
+			XN297_SetTxRxMode(TXRX_OFF);
+			MOULDKG_send_packet();
+			phase++;
+			return 600;
+		case MOULDKG_BINDRX:
+			//Wait for the packet transmission to finish
+			while(XN297_IsPacketSent()==false);
+			//Switch to RX
+			XN297_SetTxRxMode(TXRX_OFF);
+			XN297_RFChannel(MOULDKG_RX_BIND_CHANNEL);	// Set RX bind channel
+			XN297_SetTxRxMode(RX_EN);
+			phase = MOULDKG_BINDTX;
+			return MOULDKG_BIND_PACKET_PERIOD-600;
+		case MOULDKG_PREP_DATA:
+			addr=MOULDKG_EEPROM_OFFSET+RX_num*3;
+			debug("RXID: ");
+			for(uint8_t i=0;i<3*4;i++)
+			{ // load 4 consecutive RX IDs
+				MOULDKG_RX_id[i]=eeprom_read_byte((EE_ADDR)(addr+i));
+				debug(" %02X",MOULDKG_RX_id[i]);
+			}
+			debugln("");
+		case MOULDKG_PREP_DATA1:
+			//Switch to normal mode
+			BIND_DONE;
+			XN297_SetTxRxMode(TXRX_OFF);
+			phase = MOULDKG_DATA;
+			break;
+		case MOULDKG_DATA:
+			#ifdef MULTI_SYNC
+				if(num_ch==0)
+					telemetry_set_input_sync(MOULDKG_PACKET_PERIOD);
+			#endif
+			if(option == 0) option++;
+			if(num_ch<option)
+			{
+				//Set RX ID address
+				n = num_ch*3;
+				XN297_SetTXAddr(&MOULDKG_RX_id[n], 3);
+				//Set frequency based on current RX ID and packet number
+				rf = 0x0C;
+				if(packet_count & 0x04)
+				{
+					n++;
+					rf += 0x20;
+				}
+				if(packet_count & 0x02)
+					rf += 0x10 + (MOULDKG_RX_id[n] >> 4);
+				else
+					rf += MOULDKG_RX_id[n] & 0x0F;
+				XN297_RFChannel(rf);
+				#if 1
+					debugln("num_ch=%d,packet_count=%d,rf=%02X,ID=%02X %02X %02X",num_ch,packet_count,rf,MOULDKG_RX_id[num_ch*3],MOULDKG_RX_id[num_ch*3+1],MOULDKG_RX_id[num_ch*3+2]);
+				#endif
+				MOULDKG_send_packet();
+				if(num_ch==0)
+					packet_count++;
+			}
+			num_ch++;
+			num_ch &= 0x03;
+			break;
+	}
+	return MOULDKG_PACKET_PERIOD/4;
+}
+
+void MOULDKG_init()
+{
+	if(option == 0)
+		BIND_IN_PROGRESS;
+	MOULDKG_initialize_txid();
+	MOULDKG_RF_init();
+	bind_counter = MOULDKG_BIND_COUNT;
+	if(IS_BIND_IN_PROGRESS)
+		phase = MOULDKG_BINDTX;
+	else
+		phase = MOULDKG_PREP_DATA;
+	packet_count = 0;
+	num_ch = 0;
+}
+
+#endif
+
+// Analog
+// Bind TX: C=11 S=Y A= 4B 44 48 P(7)= C0 46 01 00 00 00 00
+// Bind RX: 5A 46 01 00 63 82 4E
+// Norm: C=15 S=Y A= 63 82 4E P(10)= 36 46 01 00 80 80 80 80 00 00

Multiprotocol/Multi.txt

@@ -3,7 +3,7 @@
 3,FrskyD,D8,Cloned
 4,Hisky,Hisky,HK310
 5,V2x2,V2x2,JXD506,MR101
-6,DSM,DSM2_1F,DSM2_2F,DSMX_1F,DSMX_2F,AUTO
+6,DSM,DSM2_1F,DSM2_2F,DSMX_1F,DSMX_2F,AUTO,DSMR_1F
 7,Devo,8CH,10CH,12CH,6CH,7CH
 8,YD717,YD717,SKYWLKR,SYMAX4,XINXUN,NIHUI
 9,KN,WLTOYS,FEILUN
@@ -12,20 +12,20 @@
 12,CX10,GREEN,BLUE,DM007,---,J3015_1,J3015_2,MK33041
 13,CG023,CG023,YD829
 14,Bayang,Bayang,H8S3D,X16_AH,IRDRONE,DHD_D4,QX100
-15,FrskyX,CH_16,CH_8,EU_16,EU_8,Cloned
+15,FrskyX,CH_16,CH_8,EU_16,EU_8,Cloned,Clon_8
 16,ESky,Std,ET4
-17,MT99xx,MT,H7,YZ,LS,FY805
+17,MT99xx,MT,H7,YZ,LS,FY805,A180,Dragon
 18,MJXq,WLH08,X600,X800,H26D,E010,H26WH,PHOENIX
 19,Shenqi
 20,FY326,FY326,FY319
-21,SFHSS
+21,Futaba,SFHSS
 22,J6PRO
 23,FQ777
 24,ASSAN
 25,FrskyV
 26,HONTAI,HONTAI,JJRCX1,X5C1,FQ777_951
 27,OpnLrs
-28,AFHDS2A,PWM_IBUS,PPM_IBUS,PWM_SBUS,PPM_SBUS
+28,AFHDS2A,PWM_IBUS,PPM_IBUS,PWM_SBUS,PPM_SBUS,PWM_IB16,PPM_IB16
 29,Q2X2,Q222,Q242,Q282
 30,WK2x01,WK2801,WK2401,W6_5_1,W6_6_1,W6_HEL,W6_HEL_I
 31,Q303,Q303,CX35,CX10D,CX10WD
@@ -37,12 +37,12 @@
 37,CORONA,COR_V1,COR_V2,FD_V3
 38,CFlie
 39,Hitec,OPT_FW,OPT_HUB,MINIMA
-40,WFLY
+40,WFLY,WFR0x
 41,BUGS
 42,BUGSMINI,BUGSMINI,BUGS3H
 43,Traxxas,RX6519
 44,NCC1701
-45,E01X,E012,E015,E016H
+45,E01X,E012,E015
 46,V911S,V911S,E119
 47,GD00x,GD_V1,GD_V2
 48,V761,3CH,4CH
@@ -50,23 +50,39 @@
 50,Redpine,Fast,Slow
 51,Potensic,A20
 52,ZSX,280
-53,Flyzone,FZ-410
+53,Height,5ch,8ch
 54,Scanner
-55,Frsky_RX,RX,CloneTX
-56,AFHDS2A_RX
+55,Frsky_RX,Multi,CloneTX,EraseTX,CPPM
+56,AFHDS2A_RX,Multi,CPPM
 57,HoTT,Sync,No_Sync
 58,FX816,P38
-59,Bayang_RX
-60,Pelikan,Pro,Lite
+59,Bayang_RX,Multi,CPPM
+60,Pelikan,Pro,Lite,SCX24
 61,Tiger
 62,XK,X450,X420
 63,XN_DUMP,250K,1M,2M,AUTO
 64,FrskyX2,CH_16,CH_8,EU_16,EU_8,Cloned
-65,FrSkyR9,915MHz,868MHz,915_8ch,868_8ch
+65,FrSkyR9,915MHz,868MHz,915_8ch,868_8ch,FCC,--,FCC_8ch,--_8ch
 66,PROPEL,74-Z
 67,LR12,LR12,LR12_6ch
 68,Skyartec
 69,ESKYv2,150V2
-70,DSM_RX
-71,JJRC345
-72,Q90C
+70,DSM_RX,Multi,CPPM
+71,JJRC345,JJRC345,SkyTmblr
+72,Q90C
+73,Kyosho,FHSS,Hype
+74,RadioLink,Surface,Air,DumboRC
+75,---
+76,Realacc,R11
+77,OMP
+78,M-Link
+79,WFLY,RF20x
+80,E016H,E016Hv2
+81,E010r5
+82,LOLI
+83,E129
+84,JOYSWAY
+85,E016H
+87,IKEA
+89,Losi
+90,MouldKg,Analog,Digit

Multiprotocol/Multi_Config.ino

@@ -0,0 +1,192 @@
+/*
+ This project is free software: you can redistribute it and/or modify
+ it under the terms of the GNU General Public License as published by
+ the Free Software Foundation, either version 3 of the License, or
+ (at your option) any later version.
+
+ Multiprotocol is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ GNU General Public License for more details.
+
+ You should have received a copy of the GNU General Public License
+ along with Multiprotocol.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#if defined(MULTI_CONFIG_INO)
+
+#ifdef CYRF6936_INSTALLED
+#include "iface_cyrf6936.h"
+#endif
+
+void CONFIG_write_GID(uint32_t id)
+{
+	for(uint8_t i=0;i<4;i++)
+		eeprom_write_byte((EE_ADDR)EEPROM_ID_OFFSET+i,id >> (i*8));
+	//eeprom_write_byte((EE_ADDR)(EEPROM_ID_OFFSET+10),0xf0);
+}
+
+void CONFIG_write_CID(uint8_t *data)
+{
+	for(uint8_t i=0;i<6;i++)
+		eeprom_write_byte((EE_ADDR)EEPROM_CID_OFFSET+i, data[i]);
+	//eeprom_write_byte((EE_ADDR)EEPROM_CID_INIT_OFFSET, 0xf0);
+}
+uint16_t CONFIG_callback()
+{
+	static uint8_t line=0, page=0;
+	uint32_t id=0;
+	// [0] = page<<4|line number
+	// [1..6] = max 6 bytes
+	if(CONFIG_SerialRX)
+	{
+		debug("config");
+		for(uint8_t i=0; i<7; i++)
+			debug("%02X ",CONFIG_SerialRX_val[i]);
+		debugln("");
+		CONFIG_SerialRX = false;
+		switch(CONFIG_SerialRX_val[0]&0x0F)
+		{
+			//case 0:
+				// Page change
+			//	break;
+			case 1:
+				for(uint8_t i=0; i<4; i++)
+				{
+					id <<= 8;
+					id |= CONFIG_SerialRX_val[i+1];
+				}
+				debugln("Update ID to %lx", id);
+				CONFIG_write_GID(id);
+				break;
+			case 2:
+				if(CONFIG_SerialRX_val[1]==0xAA)
+				{
+					#define STM32_UUID ((uint32_t *)0x1FFFF7E8)
+					id = STM32_UUID[0] ^ STM32_UUID[1] ^ STM32_UUID[2];
+					debugln("Reset GID to %lx", id);
+					CONFIG_write_GID(id);
+				}
+				break;
+#ifdef CYRF6936_INSTALLED
+			case 4:
+				debug("Update CID to ");
+				for(uint8_t i=0; i<6; i++)
+					debug("%02X ",CONFIG_SerialRX_val[i+1]);
+				debugln("");
+				CONFIG_write_CID(&CONFIG_SerialRX_val[1]);
+			case 5:
+				if(CONFIG_SerialRX_val[1]==0xAA)
+				{
+					uint8_t data[6];
+					CYRF_WriteRegister(CYRF_25_MFG_ID, 0xFF);	/* Fuses power on */
+					CYRF_ReadRegisterMulti(CYRF_25_MFG_ID, data, 6);
+					CYRF_WriteRegister(CYRF_25_MFG_ID, 0x00);	/* Fuses power off */
+					debug("Reset CID to ");
+					for(uint8_t i=0; i<6; i++)
+						debug("%02X ",data[i]);
+					debugln("");
+					CONFIG_write_CID(data);
+				}
+				break;
+#endif
+			case 7:
+				if(CONFIG_SerialRX_val[1]==0xAA)
+				{
+					debugln("Format EE");
+					#if defined(STM32_BOARD)
+						EEPROM.format();
+					#else
+						for (uint16_t i = 0; i < 512; i++)
+    						eeprom_write_byte((EE_ADDR)i, 0xFF);
+					#endif
+				}
+				break;
+		}
+	}
+
+	if(	telemetry_link )
+		return 10000;
+	// [0] = page<<4|line number
+	// line=0: VERSION_MAJOR, VERSION_MINOR, VERSION_REVISION, VERSION_PATCH_LEVEL, Channel order:RUDDER<<6|THROTTLE<<4|ELEVATOR<<2|AILERON
+	// [1..21] = max 20 characters, any displayable chars followed by:
+	//    0x00    : end of line
+	//    0x80+len:  selectable text to follow
+	//    0x90+len:  selectable text to follow with "Are you sure?"
+	//    0xA0+len:  not editable dec value
+	//    0xB0+len:  editable dec value
+	//    0xC0+len:  not editable hex value
+	//    0xD0+len:  editable hex value
+	memset(&packet_in[1],0,20);
+	do
+	{
+		packet_in[0] = (page<<4) | line;
+		switch(line)
+		{
+			case 0:
+				packet_in[1]=VERSION_MAJOR;
+				packet_in[2]=VERSION_MINOR;
+				packet_in[3]=VERSION_REVISION;
+				packet_in[4]=VERSION_PATCH_LEVEL;
+				packet_in[5]=RUDDER<<6|THROTTLE<<4|ELEVATOR<<2|AILERON;
+				break;
+			case 1:
+				//Global ID
+				#ifndef FORCE_GLOBAL_ID
+					memcpy(&packet_in[1],"Global ID",9);
+					packet_in[10] = 0xD0 + 4;
+				#else
+					memcpy(&packet_in[1],"Fixed ID ",9);
+					packet_in[10] = 0xC0 + 4;
+				#endif
+				MProtocol_id_master = random_id(EEPROM_ID_OFFSET,false);
+				set_rx_tx_addr(MProtocol_id_master);
+				for(uint8_t i=0; i<4; i++)
+					packet_in[11+i]=rx_tx_addr[i];
+				break;
+			#if defined(STM32_BOARD) && not defined(FORCE_GLOBAL_ID)
+			case 2:
+				//Reset global ID
+				packet_in[1] = 0x90+9;
+				memcpy(&packet_in[2],"Reset GID",9);
+				break;
+			#endif
+#ifdef CYRF6936_INSTALLED
+			case 4:
+				//Cyrf ID
+				#ifndef FORCE_CYRF_ID
+					memcpy(&packet_in[1],"Cyrf ID",7);
+					packet_in[8] = 0xD0 + 6;
+					CYRF_GetMfgData(&packet_in[9]);
+				#else
+					memcpy(&packet_in[1],"Fixed CID",9);
+					packet_in[10] = 0xC0 + 6;
+					CYRF_GetMfgData(&packet_in[11]);
+				#endif
+				break;
+			#ifndef FORCE_CYRF_ID
+			case 5:
+				//Reset Cyrf ID
+				packet_in[1] = 0x90+9;
+				memcpy(&packet_in[2],"Reset CID",9);
+				break;
+			#endif
+#endif
+			case 7:
+				packet_in[1] = 0x90+13;
+				memcpy(&packet_in[2],"Format EEPROM",13);
+				break;
+		}
+		line++;
+		line %= 8;
+	}
+	while(packet_in[1]==0);	// next line if empty
+	telemetry_link = 1;
+	return 10000;
+}
+
+void CONFIG_init()
+{
+}
+
+#endif

Multiprotocol/Multi_Names.ino

@@ -1,383 +0,0 @@
-/*
- This project is free software: you can redistribute it and/or modify
- it under the terms of the GNU General Public License as published by
- the Free Software Foundation, either version 3 of the License, or
- (at your option) any later version.
-
- Multiprotocol is distributed in the hope that it will be useful,
- but WITHOUT ANY WARRANTY; without even the implied warranty of
- MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- GNU General Public License for more details.
-
- You should have received a copy of the GNU General Public License
- along with Multiprotocol.  If not, see <http://www.gnu.org/licenses/>.
- */
-
-#if defined(MULTI_NAMES)
-
-const char STR_FLYSKY[]		="FlySky";
-const char STR_HUBSAN[]		="Hubsan";
-const char STR_FRSKYD[]		="FrSky D";
-const char STR_HISKY[]		="Hisky";
-const char STR_V2X2[]		="V2x2";
-const char STR_DSM[]		="DSM";
-const char STR_DSM_RX[]		="DSM_RX";
-const char STR_DEVO[]		="Devo";
-const char STR_YD717[]		="YD717";
-const char STR_KN[]			="KN";
-const char STR_SYMAX[]		="SymaX";
-const char STR_SLT[]		="SLT";
-const char STR_CX10[]		="CX10";
-const char STR_CG023[]		="CG023";
-const char STR_BAYANG[]		="Bayang";
-const char STR_FRSKYL[]		="FrSky L";
-const char STR_FRSKYX[]		="FrSky X";
-const char STR_FRSKYX2[]	="FrSkyX2";
-const char STR_ESKY[]		="ESky";
-const char STR_MT99XX[]		="MT99XX";
-const char STR_MJXQ[]		="MJXq";
-const char STR_SHENQI[]		="Shenqi";
-const char STR_FY326[]		="FY326";
-const char STR_SFHSS[]		="SFHSS";
-const char STR_J6PRO[]		="J6 Pro";
-const char STR_JJRC345[]	="JJRC345";
-const char STR_FQ777[]		="FQ777";
-const char STR_ASSAN[]		="Assan";
-const char STR_FRSKYV[]		="FrSky V";
-const char STR_HONTAI[]		="Hontai";
-const char STR_AFHDS2A[]	="FlSky2A";
-const char STR_Q2X2[]		="Q2x2";
-const char STR_WK2x01[]		="Walkera";
-const char STR_Q303[]		="Q303";
-const char STR_Q90C[]		="Q90C";
-const char STR_GW008[]		="GW008";
-const char STR_DM002[]		="DM002";
-const char STR_CABELL[]		="Cabell";
-const char STR_ESKY150[]	="Esky150";
-const char STR_ESKY150V2[]	="EskyV2";
-const char STR_H8_3D[]		="H8 3D";
-const char STR_CORONA[]		="Corona";
-const char STR_CFLIE[]		="CFlie";
-const char STR_HITEC[]		="Hitec";
-const char STR_WFLY[]		="WFly";
-const char STR_BUGS[]		="Bugs";
-const char STR_BUGSMINI[]	="BugMini";
-const char STR_TRAXXAS[]	="Traxxas";
-const char STR_NCC1701[]	="NCC1701";
-const char STR_E01X[]		="E01X";
-const char STR_V911S[]		="V911S";
-const char STR_GD00X[]		="GD00x";
-const char STR_V761[]		="V761";
-const char STR_KF606[]		="KF606";
-const char STR_REDPINE[]	="Redpine";
-const char STR_POTENSIC[]	="Potensi";
-const char STR_ZSX[]		="ZSX";
-const char STR_FLYZONE[]	="FlyZone";
-const char STR_SCANNER[]	="Scanner";
-const char STR_FRSKY_RX[]	="FrSkyRX";
-const char STR_AFHDS2A_RX[]	="FS2A_RX";
-const char STR_HOTT[]		="HoTT";
-const char STR_FX816[]		="FX816";
-const char STR_BAYANG_RX[]	="BayanRX";
-const char STR_PELIKAN[]	="Pelikan";
-const char STR_TIGER[]		="Tiger";
-const char STR_XK[]			="XK";
-const char STR_XN297DUMP[]	="XN297DP";
-const char STR_FRSKYR9[]	="FrSkyR9";
-const char STR_PROPEL[]		="Propel";
-const char STR_SKYARTEC[]	="Skyartc";
-const char STR_TEST[]		="Test";
-const char STR_FAKE[]		="Fake";
-
-const char STR_SUBTYPE_FLYSKY[] =     "\x04""Std\0""V9x9""V6x6""V912""CX20";
-const char STR_SUBTYPE_HUBSAN[] =     "\x04""H107""H301""H501";
-const char STR_SUBTYPE_FRSKYD[] =     "\x06""D8\0   ""Cloned";
-const char STR_SUBTYPE_FRSKYX[] =     "\x07""D16\0   ""D16 8ch""LBT(EU)""LBT 8ch""Cloned\0";
-const char STR_SUBTYPE_HISKY[] =      "\x05""Std\0 ""HK310";
-const char STR_SUBTYPE_V2X2[] =       "\x06""Std\0  ""JXD506""MR101\0";
-const char STR_SUBTYPE_DSM[] =        "\x04""2 1F""2 2F""X 1F""X 2F""Auto";
-const char STR_SUBTYPE_DEVO[] =       "\x04""8ch\0""10ch""12ch""6ch\0""7ch\0";
-const char STR_SUBTYPE_YD717[] =      "\x07""Std\0   ""SkyWlkr""Syma X4""XINXUN\0""NIHUI\0 ";
-const char STR_SUBTYPE_KN[] =         "\x06""WLtoys""FeiLun";
-const char STR_SUBTYPE_SYMAX[] =      "\x03""Std""X5C";
-const char STR_SUBTYPE_SLT[] =        "\x06""V1_6ch""V2_8ch""Q100\0 ""Q200\0 ""MR100\0";
-const char STR_SUBTYPE_CX10[] =       "\x07""Green\0 ""Blue\0  ""DM007\0 ""-\0     ""JC3015a""JC3015b""MK33041";
-const char STR_SUBTYPE_CG023[] =      "\x05""Std\0 ""YD829";
-const char STR_SUBTYPE_BAYANG[] =     "\x07""Std\0   ""H8S3D\0 ""X16 AH\0""IRDrone""DHD D4\0""QX100\0 ";
-const char STR_SUBTYPE_MT99[] =       "\x06""MT99\0 ""H7\0   ""YZ\0   ""LS\0   ""FY805";
-const char STR_SUBTYPE_MJXQ[] =       "\x07""WLH08\0 ""X600\0  ""X800\0  ""H26D\0  ""E010\0  ""H26WH\0 ""Phoenix";
-const char STR_SUBTYPE_FY326[] =      "\x05""Std\0 ""FY319";
-const char STR_SUBTYPE_HONTAI[] =     "\x07""Std\0   ""JJRC X1""X5C1\0  ""FQ_951";
-const char STR_SUBTYPE_AFHDS2A[] =    "\x08""PWM,IBUS""PPM,IBUS""PWM,SBUS""PPM,SBUS";
-const char STR_SUBTYPE_Q2X2[] =       "\x04""Q222""Q242""Q282";
-const char STR_SUBTYPE_WK2x01[] =     "\x06""WK2801""WK2401""W6_5_1""W6_6_1""W6_HeL""W6_HeI";
-const char STR_SUBTYPE_Q303[] =       "\x06""Std\0  ""CX35\0 ""CX10D\0""CX10WD";
-const char STR_SUBTYPE_CABELL[] =     "\x07""V3\0    ""V3 Telm""-\0     ""-\0     ""-\0     ""-\0     ""F-Safe\0""Unbind\0";
-const char STR_SUBTYPE_H83D[] =       "\x07""Std\0   ""H20H\0  ""H20Mini""H30Mini";
-const char STR_SUBTYPE_CORONA[] =     "\x05""V1\0  ""V2\0  ""FD V3";
-const char STR_SUBTYPE_HITEC[] =      "\x07""Optima\0""Opt Hub""Minima\0";
-const char STR_SUBTYPE_BUGS_MINI[] =  "\x06""Std\0  ""Bugs3H";
-const char STR_SUBTYPE_TRAXXAS[] =    "\x04""6519";
-const char STR_SUBTYPE_E01X[] =       "\x05""E012\0""E015\0""E016H";
-const char STR_SUBTYPE_GD00X[] =      "\x05""GD_V1""GD_V2";
-const char STR_SUBTYPE_REDPINE[] =    "\x04""Fast""Slow";
-const char STR_SUBTYPE_POTENSIC[] =   "\x03""A20";
-const char STR_SUBTYPE_ZSX[] =        "\x07""280JJRC";
-const char STR_SUBTYPE_FLYZONE[] =    "\x05""FZ410";
-const char STR_SUBTYPE_FX816[] =      "\x03""P38";
-const char STR_SUBTYPE_XN297DUMP[] =  "\x07""250Kbps""1Mbps\0 ""2Mbps\0 ""Auto\0  ""NRF\0   ";
-const char STR_SUBTYPE_ESKY150[] =    "\x03""4ch""7ch";
-const char STR_SUBTYPE_ESKY150V2[] =  "\x05""150V2";
-const char STR_SUBTYPE_V911S[] =      "\x05""V911S""E119\0";
-const char STR_SUBTYPE_XK[] =         "\x04""X450""X420";
-const char STR_SUBTYPE_FRSKYR9[] =    "\x07""915MHz\0""868MHz\0""915 8ch""868 8ch";
-const char STR_SUBTYPE_ESKY[] =       "\x03""Std""ET4";
-const char STR_SUBTYPE_PROPEL[] =     "\x04""74-Z";
-const char STR_SUBTYPE_FRSKY_RX[] =   "\x07""RX\0    ""CloneTX";
-const char STR_SUBTYPE_FRSKYL[] =     "\x08""LR12\0   ""LR12 6ch";
-const char STR_SUBTYPE_WFLY[] =       "\x06""WFR0xS";
-const char STR_SUBTYPE_HOTT[] =       "\x07""Sync\0  ""No_Sync";
-const char STR_SUBTYPE_PELIKAN[] =    "\x04""Pro\0""Lite";
-const char STR_SUBTYPE_V761[] =       "\x03""3CH""4CH";
-
-enum
-{
-	OPTION_NONE,
-	OPTION_OPTION,
-	OPTION_RFTUNE,
-	OPTION_VIDFREQ,
-	OPTION_FIXEDID,
-	OPTION_TELEM,
-	OPTION_SRVFREQ,
-	OPTION_MAXTHR,
-	OPTION_RFCHAN,
-	OPTION_RFPOWER,
-};
-
-#define NO_SUBTYPE		nullptr
-
-const mm_protocol_definition multi_protocols[] = {
-// Protocol number, Protocol String, Number of sub_protocols, Sub_protocol strings, Option type
-	#if defined(ASSAN_NRF24L01_INO)
-		{PROTO_ASSAN,      STR_ASSAN,     0, NO_SUBTYPE,            OPTION_NONE    },
-	#endif
-	#if defined(BAYANG_NRF24L01_INO)
-		{PROTO_BAYANG,     STR_BAYANG,    6, STR_SUBTYPE_BAYANG,    OPTION_TELEM   },
-	#endif
-	#if defined(BAYANG_RX_NRF24L01_INO)
-		{PROTO_BAYANG_RX,  STR_BAYANG_RX, 0, NO_SUBTYPE,            OPTION_NONE    },	
-	#endif
-	#if defined(BUGS_A7105_INO)
-		{PROTO_BUGS,       STR_BUGS,      0, NO_SUBTYPE,            OPTION_NONE    },
-	#endif
-	#if defined(BUGSMINI_NRF24L01_INO)
-		{PROTO_BUGSMINI,   STR_BUGSMINI,  2, STR_SUBTYPE_BUGS_MINI, OPTION_NONE    },
-	#endif
-	#if defined(CABELL_NRF24L01_INO)
-		{PROTO_CABELL,     STR_CABELL,    8, STR_SUBTYPE_CABELL,    OPTION_OPTION  },
-	#endif
-	#if defined(CFLIE_NRF24L01_INO)
-		{PROTO_CFLIE,      STR_CFLIE,     0, NO_SUBTYPE,            OPTION_NONE    },
-	#endif
-	#if defined(CG023_NRF24L01_INO)
-		{PROTO_CG023,      STR_CG023,     2, STR_SUBTYPE_CG023,     OPTION_NONE    },
-	#endif
-	#if defined(CORONA_CC2500_INO)
-		{PROTO_CORONA,     STR_CORONA,    3, STR_SUBTYPE_CORONA,    OPTION_RFTUNE  },
-	#endif
-	#if defined(CX10_NRF24L01_INO)
-		{PROTO_CX10,       STR_CX10,      7, STR_SUBTYPE_CX10,      OPTION_NONE    },
-	#endif
-	#if defined(DEVO_CYRF6936_INO)
-		{PROTO_DEVO,       STR_DEVO,      5, STR_SUBTYPE_DEVO,      OPTION_FIXEDID },
-	#endif
-	#if defined(DM002_NRF24L01_INO)
-		{PROTO_DM002,      STR_DM002,     0, NO_SUBTYPE,            OPTION_NONE    },
-	#endif
-	#if defined(DSM_CYRF6936_INO)
-		{PROTO_DSM,        STR_DSM,       5, STR_SUBTYPE_DSM,       OPTION_MAXTHR  },
-	#endif
-	#if defined(DSM_RX_CYRF6936_INO)
-		{PROTO_DSM_RX,     STR_DSM_RX,    0, NO_SUBTYPE,            OPTION_NONE    },
-	#endif
-	#if defined(E01X_NRF24L01_INO)
-		{PROTO_E01X,       STR_E01X,      3, STR_SUBTYPE_E01X,      OPTION_OPTION  },
-	#endif
-	#if defined(ESKY_NRF24L01_INO)
-		{PROTO_ESKY,       STR_ESKY,      2, STR_SUBTYPE_ESKY,      OPTION_NONE    },
-	#endif
-	#if defined(ESKY150_NRF24L01_INO)
-		{PROTO_ESKY150,    STR_ESKY150,   2, STR_SUBTYPE_ESKY150,   OPTION_NONE    },
-	#endif
-	#if defined(ESKY150V2_CC2500_INO)
-		{PROTO_ESKY150V2,  STR_ESKY150V2, 1, STR_SUBTYPE_ESKY150V2, OPTION_RFTUNE  },
-	#endif
-	#if defined(FLYSKY_A7105_INO)
-		{PROTO_FLYSKY,     STR_FLYSKY,    5, STR_SUBTYPE_FLYSKY,    OPTION_NONE    },
-	#endif
-	#if defined(AFHDS2A_A7105_INO)
-		{PROTO_AFHDS2A,    STR_AFHDS2A,   4, STR_SUBTYPE_AFHDS2A,   OPTION_SRVFREQ },
-	#endif
-	#if defined(AFHDS2A_RX_A7105_INO)
-		{PROTO_AFHDS2A_RX, STR_AFHDS2A_RX,0, NO_SUBTYPE,            OPTION_NONE    },
-	#endif
-	#if defined(FLYZONE_A7105_INO)
-		{PROTO_FLYZONE,    STR_FLYZONE,   1, STR_SUBTYPE_FLYZONE,   OPTION_NONE    },
-	#endif
-	#if defined(FQ777_NRF24L01_INO)
-		{PROTO_FQ777,      STR_FQ777,     0, NO_SUBTYPE,            OPTION_NONE    },
-	#endif
-//OpenTX 2.3.x issue: DO NOT CHANGE ORDER below
-	#if defined(FRSKY_RX_CC2500_INO)
-		{PROTO_FRSKY_RX,   STR_FRSKY_RX,  2, STR_SUBTYPE_FRSKY_RX,  OPTION_RFTUNE  },
-	#endif
-	#if defined(FRSKYD_CC2500_INO)
-		{PROTO_FRSKYD,     STR_FRSKYD,    2, STR_SUBTYPE_FRSKYD,    OPTION_RFTUNE  },
-	#endif
-	#if defined(FRSKYV_CC2500_INO)
-		{PROTO_FRSKYV,      STR_FRSKYV,   0, NO_SUBTYPE,            OPTION_RFTUNE  },
-	#endif
-	#if defined(FRSKYX_CC2500_INO)
-		{PROTO_FRSKYX,     STR_FRSKYX,    5, STR_SUBTYPE_FRSKYX,    OPTION_RFTUNE  },
-		{PROTO_FRSKYX2,    STR_FRSKYX2,   5, STR_SUBTYPE_FRSKYX,    OPTION_RFTUNE  },
-	#endif
-//OpenTX 2.3.x issue: DO NOT CHANGE ORDER above
-	#if defined(FRSKYL_CC2500_INO)
-		{PROTO_FRSKYL,     STR_FRSKYL,    2, STR_SUBTYPE_FRSKYL,    OPTION_RFTUNE  },
-	#endif
-	#if defined(FRSKYR9_SX1276_INO)
-		{PROTO_FRSKY_R9,   STR_FRSKYR9,   4, STR_SUBTYPE_FRSKYR9,   OPTION_NONE    },
-	#endif
-	#if defined(FX816_NRF24L01_INO)
-		{PROTO_FX816,      STR_FX816,     1, STR_SUBTYPE_FX816,     OPTION_NONE    },
-	#endif
-	#if defined(FY326_NRF24L01_INO)
-		{PROTO_FY326,      STR_FY326,     2, STR_SUBTYPE_FY326,     OPTION_NONE    },
-	#endif
-	#if defined(GD00X_NRF24L01_INO)
-		{PROTO_GD00X,      STR_GD00X,     2, STR_SUBTYPE_GD00X,     OPTION_RFTUNE  },
-	#endif
-	#if defined(GW008_NRF24L01_INO)
-		{PROTO_GW008,      STR_GW008,     0, NO_SUBTYPE,            OPTION_NONE    },
-	#endif
-	#if defined(H8_3D_NRF24L01_INO)
-		{PROTO_H8_3D,      STR_H8_3D,     4, STR_SUBTYPE_H83D,      OPTION_NONE    },
-	#endif
-	#if defined(HISKY_NRF24L01_INO)
-		{PROTO_HISKY,      STR_HISKY,     2, STR_SUBTYPE_HISKY,     OPTION_NONE    },
-	#endif
-	#if defined(HITEC_CC2500_INO)
-		{PROTO_HITEC,      STR_HITEC,     3, STR_SUBTYPE_HITEC,     OPTION_RFTUNE  },
-	#endif
-	#if defined(HONTAI_NRF24L01_INO)
-		{PROTO_HONTAI,     STR_HONTAI,    4, STR_SUBTYPE_HONTAI,    OPTION_NONE    },
-	#endif
-	#if defined(HOTT_CC2500_INO)
-		{PROTO_HOTT,       STR_HOTT,      2, STR_SUBTYPE_HOTT,      OPTION_RFTUNE  },
-	#endif
-	#if defined(HUBSAN_A7105_INO)
-		{PROTO_HUBSAN,     STR_HUBSAN,    3, STR_SUBTYPE_HUBSAN,    OPTION_VIDFREQ },
-	#endif
-	#if defined(J6PRO_CYRF6936_INO)
-		{PROTO_J6PRO,      STR_J6PRO,     0, NO_SUBTYPE,            OPTION_NONE    },
-	#endif
-	#if defined(JJRC345_NRF24L01_INO)
-		{PROTO_JJRC345,    STR_JJRC345,   0, NO_SUBTYPE,            OPTION_NONE    },
-	#endif
-	#if defined(KF606_NRF24L01_INO)
-		{PROTO_KF606,      STR_KF606,     0, NO_SUBTYPE,            OPTION_RFTUNE  },
-	#endif
-	#if defined(KN_NRF24L01_INO)
-		{PROTO_KN,         STR_KN,        2, STR_SUBTYPE_KN,        OPTION_NONE    },
-	#endif
-	#if defined(MJXQ_NRF24L01_INO)
-		{PROTO_MJXQ,       STR_MJXQ,      7, STR_SUBTYPE_MJXQ,      OPTION_RFTUNE  },
-	#endif
-	#if defined(MT99XX_NRF24L01_INO)
-		{PROTO_MT99XX,     STR_MT99XX,    5, STR_SUBTYPE_MT99,      OPTION_NONE    },
-	#endif
-	#if defined(NCC1701_NRF24L01_INO)
-		{PROTO_NCC1701,    STR_NCC1701,   0, NO_SUBTYPE,            OPTION_NONE    },
-	#endif
-	#if defined(PELIKAN_A7105_INO)
-		{PROTO_PELIKAN,    STR_PELIKAN  , 2, STR_SUBTYPE_PELIKAN,   OPTION_NONE    },	
-	#endif
-	#if defined(POTENSIC_NRF24L01_INO)
-		{PROTO_POTENSIC,   STR_POTENSIC,  1, STR_SUBTYPE_POTENSIC,  OPTION_NONE    },
-	#endif
-	#if defined(PROPEL_NRF24L01_INO)
-		{PROTO_PROPEL,     STR_PROPEL,    1, STR_SUBTYPE_PROPEL,    OPTION_NONE    },
-	#endif
-	#if defined(CX10_NRF24L01_INO)
-		{PROTO_Q2X2,       STR_Q2X2,      3, STR_SUBTYPE_Q2X2,      OPTION_NONE    },
-	#endif
-	#if defined(Q303_NRF24L01_INO)
-		{PROTO_Q303,       STR_Q303,      4, STR_SUBTYPE_Q303,      OPTION_NONE    },
-	#endif
-	#if defined(Q90C_NRF24L01_INO)
-		{PROTO_Q90C,       STR_Q90C,      0, NO_SUBTYPE,            OPTION_RFTUNE  },
-	#endif
-	#if defined(REDPINE_CC2500_INO)
-		{PROTO_REDPINE,    STR_REDPINE,   2, STR_SUBTYPE_REDPINE,   OPTION_RFTUNE  },
-	#endif
-	#if defined(SCANNER_CC2500_INO)
-	//	{PROTO_SCANNER,    STR_SCANNER,   0, NO_SUBTYPE,            OPTION_NONE    },
-	#endif
-	#if defined(SFHSS_CC2500_INO)
-		{PROTO_SFHSS,      STR_SFHSS,     0, NO_SUBTYPE,            OPTION_RFTUNE  },
-	#endif
-	#if defined(SHENQI_NRF24L01_INO)
-		{PROTO_SHENQI,     STR_SHENQI,    0, NO_SUBTYPE,            OPTION_NONE    },
-	#endif
-	#if defined(SKYARTEC_CC2500_INO)
-		{PROTO_SKYARTEC,   STR_SKYARTEC,  0, NO_SUBTYPE,            OPTION_RFTUNE  },
-	#endif
-	#if defined(SLT_NRF24L01_INO)
-		{PROTO_SLT,        STR_SLT,       5, STR_SUBTYPE_SLT,       OPTION_RFTUNE  },
-	#endif
-	#if defined(SYMAX_NRF24L01_INO)
-		{PROTO_SYMAX,      STR_SYMAX,     2, STR_SUBTYPE_SYMAX,     OPTION_NONE    },
-	#endif
-	#if defined(TIGER_NRF24L01_INO)
-		{PROTO_TIGER,      STR_TIGER    , 0, NO_SUBTYPE,            OPTION_NONE    },	
-	#endif
-	#if defined(TRAXXAS_CYRF6936_INO)
-		{PROTO_TRAXXAS,    STR_TRAXXAS,   1, STR_SUBTYPE_TRAXXAS,   OPTION_NONE    },
-	#endif
-	#if defined(V2X2_NRF24L01_INO)
-		{PROTO_V2X2,       STR_V2X2,      3, STR_SUBTYPE_V2X2,      OPTION_NONE    },
-	#endif
-	#if defined(V761_NRF24L01_INO)
-		{PROTO_V761,       STR_V761,      2, STR_SUBTYPE_V761,      OPTION_NONE    },
-	#endif
-	#if defined(V911S_NRF24L01_INO)
-		{PROTO_V911S,      STR_V911S,     2, STR_SUBTYPE_V911S,     OPTION_RFTUNE  },
-	#endif
-	#if defined(WK2x01_CYRF6936_INO)
-		{PROTO_WK2x01,     STR_WK2x01,    6, STR_SUBTYPE_WK2x01,    OPTION_NONE    },
-	#endif
-	#if defined(WFLY_CYRF6936_INO)
-		{PROTO_WFLY,       STR_WFLY,      1, STR_SUBTYPE_WFLY,      OPTION_NONE    },
-	#endif
-	#if defined(XK_NRF24L01_INO)
-		{PROTO_XK,         STR_XK       , 2, STR_SUBTYPE_XK,        OPTION_RFTUNE  },	
-	#endif
-	#if defined(XN297DUMP_NRF24L01_INO)
-		{PROTO_XN297DUMP,  STR_XN297DUMP, 5, STR_SUBTYPE_XN297DUMP, OPTION_RFCHAN  },
-	#endif
-	#if defined(YD717_NRF24L01_INO)
-		{PROTO_YD717,      STR_YD717,     5, STR_SUBTYPE_YD717,     OPTION_NONE    },
-	#endif
-	#if defined(ZSX_NRF24L01_INO)
-		{PROTO_ZSX,        STR_ZSX,       1, STR_SUBTYPE_ZSX,       OPTION_NONE    },
-	#endif
-	#if defined(TEST_CC2500_INO)
-		{PROTO_TEST,       STR_TEST,      0, NO_SUBTYPE,            OPTION_RFTUNE  },
-	#endif
-	#if defined(FAKE_NRF24L01_INO)
-		{PROTO_FAKE,       STR_FAKE,      0, NO_SUBTYPE,            OPTION_NONE    },
-	#endif
-		{0x00,             nullptr,       0, nullptr,               0 }
-};
-
-#endif

Multiprotocol/Multi_Protos.ino

@@ -0,0 +1,467 @@
+/*
+ This project is free software: you can redistribute it and/or modify
+ it under the terms of the GNU General Public License as published by
+ the Free Software Foundation, either version 3 of the License, or
+ (at your option) any later version.
+
+ Multiprotocol is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ GNU General Public License for more details.
+
+ You should have received a copy of the GNU General Public License
+ along with Multiprotocol.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+const char STR_FLYSKY[]		="FlySky";
+const char STR_HUBSAN[]		="Hubsan";
+const char STR_FRSKYD[]		="FrSky D";
+const char STR_HISKY[]		="Hisky";
+const char STR_V2X2[]		="V2x2";
+const char STR_DSM[]		="DSM";
+const char STR_DSM_RX[]		="DSM_RX";
+const char STR_DEVO[]		="Devo";
+const char STR_YD717[]		="YD717";
+const char STR_KN[]			="KN";
+const char STR_SYMAX[]		="SymaX";
+const char STR_SLT[]		="SLT";
+const char STR_CX10[]		="CX10";
+const char STR_CG023[]		="CG023";
+const char STR_BAYANG[]		="Bayang";
+const char STR_FRSKYL[]		="FrSky L";
+const char STR_FRSKYX[]		="FrSky X";
+const char STR_FRSKYX2[]	="FrSkyX2";
+const char STR_ESKY[]		="ESky";
+const char STR_MT99XX[]		="MT99XX";
+const char STR_MJXQ[]		="MJXq";
+const char STR_SHENQI[]		="Shenqi";
+const char STR_FY326[]		="FY326";
+const char STR_FUTABA[]		="Futaba";
+const char STR_J6PRO[]		="J6 Pro";
+const char STR_JJRC345[]	="JJRC345";
+const char STR_JOYSWAY[]	="JOYSWAY";
+const char STR_FQ777[]		="FQ777";
+const char STR_ASSAN[]		="Assan";
+const char STR_FRSKYV[]		="FrSky V";
+const char STR_HONTAI[]		="Hontai";
+const char STR_AFHDS2A[]	="FlSky2A";
+const char STR_Q2X2[]		="Q2x2";
+const char STR_WK2x01[]		="Walkera";
+const char STR_Q303[]		="Q303";
+const char STR_Q90C[]		="Q90C";
+const char STR_GW008[]		="GW008";
+const char STR_DM002[]		="DM002";
+const char STR_CABELL[]		="Cabell";
+const char STR_ESKY150[]	="Esky150";
+const char STR_ESKY150V2[]	="EskyV2";
+const char STR_H8_3D[]		="H8 3D";
+const char STR_CORONA[]		="Corona";
+const char STR_CFLIE[]		="CFlie";
+const char STR_HITEC[]		="Hitec";
+const char STR_WFLY[]		="WFLY";
+const char STR_WFLY2[]		="WFLY2";
+const char STR_BUGS[]		="Bugs";
+const char STR_BUGSMINI[]	="BugMini";
+const char STR_TRAXXAS[]	="Traxxas";
+const char STR_NCC1701[]	="NCC1701";
+const char STR_E01X[]		="E01X";
+const char STR_V911S[]		="V911S";
+const char STR_GD00X[]		="GD00x";
+const char STR_V761[]		="V761";
+const char STR_KF606[]		="KF606";
+const char STR_REDPINE[]	="Redpine";
+const char STR_POTENSIC[]	="Potensi";
+const char STR_ZSX[]		="ZSX";
+const char STR_HEIGHT[]		="Height";
+const char STR_SCANNER[]	="Scanner";
+const char STR_FRSKY_RX[]	="FrSkyRX";
+const char STR_AFHDS2A_RX[]	="FS2A_RX";
+const char STR_HOTT[]		="HoTT";
+const char STR_FX816[]		="FX816";
+const char STR_BAYANG_RX[]	="BayanRX";
+const char STR_PELIKAN[]	="Pelikan";
+const char STR_TIGER[]		="Tiger";
+const char STR_XK[]			="XK";
+const char STR_XN297DUMP[]	="XN297DP";
+const char STR_FRSKYR9[]	="FrSkyR9";
+const char STR_PROPEL[]		="Propel";
+const char STR_SKYARTEC[]	="Skyartc";
+const char STR_KYOSHO[]		="Kyosho";
+const char STR_RLINK[]		="RadLink";
+const char STR_REALACC[]	="Realacc";
+const char STR_OMP[]		="OMP";
+const char STR_MLINK[]		="M-Link";
+const char STR_TEST[]		="Test";
+const char STR_NANORF[]		="NanoRF";
+const char STR_E016HV2[]    ="E016Hv2";
+const char STR_E010R5[]     ="E010r5";
+const char STR_LOLI[]       ="LOLI";
+const char STR_E129[]       ="E129";
+const char STR_E016H[]      ="E016H";
+const char STR_IKEAANSLUTA[]="Ansluta";
+const char STR_CONFIG[]     ="Config";
+const char STR_LOSI[]       ="Losi";
+const char STR_MOULDKG[]    ="MouldKg";
+
+const char STR_SUBTYPE_FLYSKY[] =     "\x04""Std\0""V9x9""V6x6""V912""CX20";
+const char STR_SUBTYPE_HUBSAN[] =     "\x04""H107""H301""H501";
+const char STR_SUBTYPE_FRSKYD[] =     "\x06""D8\0   ""Cloned";
+const char STR_SUBTYPE_FRSKYX[] =     "\x07""D16\0   ""D16 8ch""LBT(EU)""LBT 8ch""Cloned\0""Clo 8ch";
+const char STR_SUBTYPE_HISKY[] =      "\x05""Std\0 ""HK310";
+const char STR_SUBTYPE_V2X2[] =       "\x06""Std\0  ""JXD506""MR101\0";
+const char STR_SUBTYPE_DSM[] =        "\x04""2 1F""2 2F""X 1F""X 2F""Auto""R 1F";
+const char STR_SUBTYPE_DEVO[] =       "\x04""8ch\0""10ch""12ch""6ch\0""7ch\0";
+const char STR_SUBTYPE_YD717[] =      "\x07""Std\0   ""SkyWlkr""Syma X4""XINXUN\0""NIHUI\0 ";
+const char STR_SUBTYPE_KN[] =         "\x06""WLtoys""FeiLun";
+const char STR_SUBTYPE_SYMAX[] =      "\x03""Std""X5C";
+const char STR_SUBTYPE_SLT[] =        "\x06""V1_6ch""V2_8ch""Q100\0 ""Q200\0 ""MR100\0";
+const char STR_SUBTYPE_CX10[] =       "\x07""Green\0 ""Blue\0  ""DM007\0 ""-\0     ""JC3015a""JC3015b""MK33041";
+const char STR_SUBTYPE_CG023[] =      "\x05""Std\0 ""YD829";
+const char STR_SUBTYPE_BAYANG[] =     "\x07""Std\0   ""H8S3D\0 ""X16 AH\0""IRDrone""DHD D4\0""QX100\0 ";
+const char STR_SUBTYPE_MT99[] =       "\x06""MT99\0 ""H7\0   ""YZ\0   ""LS\0   ""FY805\0""A180\0 ""Dragon";
+const char STR_SUBTYPE_MJXQ[] =       "\x07""WLH08\0 ""X600\0  ""X800\0  ""H26D\0  ""E010\0  ""H26WH\0 ""Phoenix";
+const char STR_SUBTYPE_FY326[] =      "\x05""Std\0 ""FY319";
+const char STR_SUBTYPE_HONTAI[] =     "\x07""Std\0   ""JJRC X1""X5C1\0  ""FQ_951";
+const char STR_SUBTYPE_AFHDS2A[] =    "\x08""PWM,IBUS""PPM,IBUS""PWM,SBUS""PPM,SBUS""PWM,IB16""PPM,IB16""PWM,SB16""PPM,SB16";
+const char STR_SUBTYPE_Q2X2[] =       "\x04""Q222""Q242""Q282";
+const char STR_SUBTYPE_WK2x01[] =     "\x06""WK2801""WK2401""W6_5_1""W6_6_1""W6_HeL""W6_HeI";
+const char STR_SUBTYPE_Q303[] =       "\x06""Std\0  ""CX35\0 ""CX10D\0""CX10WD";
+const char STR_SUBTYPE_CABELL[] =     "\x07""V3\0    ""V3 Telm""-\0     ""-\0     ""-\0     ""-\0     ""F-Safe\0""Unbind\0";
+const char STR_SUBTYPE_H83D[] =       "\x07""Std\0   ""H20H\0  ""H20Mini""H30Mini";
+const char STR_SUBTYPE_CORONA[] =     "\x05""V1\0  ""V2\0  ""FD V3";
+const char STR_SUBTYPE_HITEC[] =      "\x07""Optima\0""Opt Hub""Minima\0";
+const char STR_SUBTYPE_BUGS_MINI[] =  "\x06""Std\0  ""Bugs3H";
+const char STR_SUBTYPE_TRAXXAS[] =    "\x04""6519";
+const char STR_SUBTYPE_E01X[] =       "\x05""E012\0""E015\0";
+const char STR_SUBTYPE_GD00X[] =      "\x05""GD_V1""GD_V2";
+const char STR_SUBTYPE_REDPINE[] =    "\x04""Fast""Slow";
+const char STR_SUBTYPE_POTENSIC[] =   "\x03""A20";
+const char STR_SUBTYPE_ZSX[] =        "\x07""280JJRC";
+const char STR_SUBTYPE_HEIGHT[] =    "\x03""5ch""8ch";
+const char STR_SUBTYPE_FX816[] =      "\x03""P38";
+const char STR_SUBTYPE_XN297DUMP[] =  "\x07""250Kbps""1Mbps\0 ""2Mbps\0 ""Auto\0  ""NRF\0   ""CC2500\0";
+const char STR_SUBTYPE_ESKY150[] =    "\x03""4ch""7ch";
+const char STR_SUBTYPE_ESKY150V2[] =  "\x05""150V2";
+const char STR_SUBTYPE_V911S[] =      "\x05""V911S""E119\0";
+const char STR_SUBTYPE_XK[] =         "\x04""X450""X420";
+const char STR_SUBTYPE_FRSKYR9[] =    "\x07""915MHz\0""868MHz\0""915 8ch""868 8ch""FCC\0   ""--\0    ""FCC 8ch""-- 8ch\0";
+const char STR_SUBTYPE_ESKY[] =       "\x03""Std""ET4";
+const char STR_SUBTYPE_PROPEL[] =     "\x04""74-Z";
+const char STR_SUBTYPE_FRSKYL[] =     "\x08""LR12\0   ""LR12 6ch";
+const char STR_SUBTYPE_WFLY[] =       "\x05""WFR0x";
+const char STR_SUBTYPE_WFLY2[] =      "\x05""RF20x";
+const char STR_SUBTYPE_HOTT[] =       "\x07""Sync\0  ""No_Sync";
+const char STR_SUBTYPE_PELIKAN[] =    "\x05""Pro\0 ""Lite\0""SCX24";
+const char STR_SUBTYPE_V761[] =       "\x03""3ch""4ch";
+const char STR_SUBTYPE_RLINK[] =      "\x07""Surface""Air\0   ""DumboRC";
+const char STR_SUBTYPE_REALACC[] =    "\x03""R11";
+const char STR_SUBTYPE_KYOSHO[] =     "\x04""FHSS""Hype";
+const char STR_SUBTYPE_FUTABA[] =     "\x05""SFHSS";
+const char STR_SUBTYPE_JJRC345[] =    "\x08""JJRC345\0""SkyTmblr";
+const char STR_SUBTYPE_MOULKG[] =     "\x06""Analog""Digit\0";
+
+#define NO_SUBTYPE		nullptr
+
+#ifdef SEND_CPPM
+	const char STR_SUB_FRSKY_RX[] =   "\x07""Multi\0 ""CloneTX""EraseTX""CPPM\0  ";
+	#define FRCPPM   4
+	const char STR_CPPM[] =           "\x05""Multi""CPPM\0";
+	#define NBR_CPPM 2
+#else
+	const char STR_SUB_FRSKY_RX[] =   "\x07""Multi\0 ""CloneTX""EraseTX";
+	#define FRCPPM   3
+	#define STR_CPPM NO_SUBTYPE
+	#define NBR_CPPM 0
+#endif
+
+enum
+{
+	OPTION_NONE,
+	OPTION_OPTION,
+	OPTION_RFTUNE,
+	OPTION_VIDFREQ,
+	OPTION_FIXEDID,
+	OPTION_TELEM,
+	OPTION_SRVFREQ,
+	OPTION_MAXTHR,
+	OPTION_RFCHAN,
+	OPTION_RFPOWER,
+	OPTION_WBUS,
+};
+
+const mm_protocol_definition multi_protocols[] = {
+// Protocol number, Protocol String, Sub_protocol strings, Number of sub_protocols, Option type, Failsafe, ChMap, RF switch, Init, Callback
+	#if defined(MULTI_CONFIG_INO)
+		{PROTO_CONFIG,     STR_CONFIG,    NO_SUBTYPE,            0, OPTION_NONE,    0, 0, 0,         CONFIG_init,     CONFIG_callback     },
+	#endif
+	#if defined(ASSAN_NRF24L01_INO)
+		{PROTO_ASSAN,      STR_ASSAN,     NO_SUBTYPE,            0, OPTION_NONE,    0, 0, SW_NRF,    ASSAN_init,      ASSAN_callback      },
+	#endif
+	#if defined(BAYANG_NRF24L01_INO)
+		{PROTO_BAYANG,     STR_BAYANG,    STR_SUBTYPE_BAYANG,    6, OPTION_TELEM,   0, 0, SW_NRF,    BAYANG_init,     BAYANG_callback     },
+	#endif
+	#if defined(BAYANG_RX_NRF24L01_INO)
+		{PROTO_BAYANG_RX,  STR_BAYANG_RX, STR_CPPM,       NBR_CPPM, OPTION_NONE,    0, 0, SW_NRF,    BAYANG_RX_init,  BAYANG_RX_callback  },	
+	#endif
+	#if defined(BUGS_A7105_INO)
+		{PROTO_BUGS,       STR_BUGS,      NO_SUBTYPE,            0, OPTION_NONE,    0, 0, SW_A7105,  BUGS_init,       BUGS_callback       },
+	#endif
+	#if defined(BUGSMINI_NRF24L01_INO)
+		{PROTO_BUGSMINI,   STR_BUGSMINI,  STR_SUBTYPE_BUGS_MINI, 2, OPTION_NONE,    0, 0, SW_NRF,    BUGSMINI_init,   BUGSMINI_callback   },
+	#endif
+	#if defined(CABELL_NRF24L01_INO)                           
+		{PROTO_CABELL,     STR_CABELL,    STR_SUBTYPE_CABELL,    8, OPTION_OPTION,  0, 0, SW_NRF,    CABELL_init,     CABELL_callback     },
+	#endif
+	#if defined(CFLIE_NRF24L01_INO)
+		{PROTO_CFLIE,      STR_CFLIE,     NO_SUBTYPE,            0, OPTION_NONE,    0, 0, SW_NRF,    CFLIE_init,      CFLIE_callback      }, // review protocol
+	#endif
+	#if defined(CG023_NRF24L01_INO)
+		{PROTO_CG023,      STR_CG023,     STR_SUBTYPE_CG023,     2, OPTION_NONE,    0, 0, SW_NRF,    CG023_init,      CG023_callback      },
+	#endif
+	#if defined(CORONA_CC2500_INO)
+		{PROTO_CORONA,     STR_CORONA,    STR_SUBTYPE_CORONA,    3, OPTION_RFTUNE,  0, 0, SW_CC2500, CORONA_init,     CORONA_callback     },
+	#endif
+	#if defined(CX10_NRF24L01_INO)
+		{PROTO_CX10,       STR_CX10,      STR_SUBTYPE_CX10,      7, OPTION_NONE,    0, 0, SW_NRF,    CX10_init,       CX10_callback       },
+	#endif
+	#if defined(DEVO_CYRF6936_INO)
+		{PROTO_DEVO,       STR_DEVO,      STR_SUBTYPE_DEVO,      5, OPTION_FIXEDID, 1, 1, SW_CYRF,   DEVO_init,       DEVO_callback       },
+	#endif
+	#if defined(DM002_NRF24L01_INO)
+		{PROTO_DM002,      STR_DM002,     NO_SUBTYPE,            0, OPTION_NONE,    0, 0, SW_NRF,    DM002_init,      DM002_callback      },
+	#endif
+	#if defined(DSM_CYRF6936_INO)
+		{PROTO_DSM,        STR_DSM,       STR_SUBTYPE_DSM,       6, OPTION_MAXTHR,  0, 1, SW_CYRF,   DSM_init,        DSM_callback        },
+	#endif
+	#if defined(DSM_RX_CYRF6936_INO)
+		{PROTO_DSM_RX,     STR_DSM_RX,    STR_CPPM,       NBR_CPPM, OPTION_NONE,    0, 1, SW_CYRF,   DSM_RX_init,     DSM_RX_callback     },
+	#endif
+	#if defined(E010R5_CYRF6936_INO)
+		{PROTO_E010R5,     STR_E010R5,    NO_SUBTYPE,            0, OPTION_NONE,    0, 0, SW_CYRF,   E010R5_init,     E010R5_callback     },
+	#endif
+	#if defined(E016H_NRF24L01_INO)
+		{PROTO_E016H,      STR_E016H,     NO_SUBTYPE,            0, OPTION_NONE,    0, 0, SW_NRF,    E016H_init,      E016H_callback      },
+	#endif
+	#if defined(E016HV2_CC2500_INO)
+		{PROTO_E016HV2,    STR_E016HV2,   NO_SUBTYPE,            0, OPTION_RFTUNE,  0, 0, SW_CC2500, E016HV2_init,    E016HV2_callback    },
+	#endif
+	#if defined(E01X_NRF24L01_INO)
+		{PROTO_E01X,       STR_E01X,      STR_SUBTYPE_E01X,      2, OPTION_OPTION,  0, 0, SW_NRF,    E01X_init,       E01X_callback       },
+	#endif
+	#if defined(E129_CYRF6936_INO)
+		{PROTO_E129,       STR_E129,      NO_SUBTYPE,            0, OPTION_NONE,    0, 0, SW_CYRF,   E129_init,       E129_callback       },
+	#endif
+	#if defined(ESKY_NRF24L01_INO)
+		{PROTO_ESKY,       STR_ESKY,      STR_SUBTYPE_ESKY,      2, OPTION_NONE,    0, 1, SW_NRF,    ESKY_init,       ESKY_callback       },
+	#endif
+	#if defined(ESKY150_NRF24L01_INO)
+		{PROTO_ESKY150,    STR_ESKY150,   STR_SUBTYPE_ESKY150,   2, OPTION_NONE,    0, 0, SW_NRF,    ESKY150_init,    ESKY150_callback    },
+	#endif
+	#if defined(ESKY150V2_CC2500_INO)
+		{PROTO_ESKY150V2,  STR_ESKY150V2, STR_SUBTYPE_ESKY150V2, 1, OPTION_RFTUNE,  0, 1, SW_CC2500, ESKY150V2_init,  ESKY150V2_callback  },
+	#endif
+	#if defined(FLYSKY_A7105_INO)
+		{PROTO_FLYSKY,     STR_FLYSKY,    STR_SUBTYPE_FLYSKY,    5, OPTION_NONE,    0, 1, SW_A7105,  FLYSKY_init,     FLYSKY_callback     },
+	#endif
+	#if defined(AFHDS2A_A7105_INO)
+		{PROTO_AFHDS2A,    STR_AFHDS2A,   STR_SUBTYPE_AFHDS2A,   8, OPTION_SRVFREQ, 1, 1, SW_A7105,  AFHDS2A_init,    AFHDS2A_callback    },
+	#endif
+	#if defined(AFHDS2A_RX_A7105_INO)
+		{PROTO_AFHDS2A_RX, STR_AFHDS2A_RX,STR_CPPM,       NBR_CPPM, OPTION_NONE,    0, 0, SW_A7105,  AFHDS2A_RX_init, AFHDS2A_RX_callback },
+	#endif
+	#if defined(FQ777_NRF24L01_INO)
+		{PROTO_FQ777,      STR_FQ777,     NO_SUBTYPE,            0, OPTION_NONE,    0, 0, SW_NRF,    FQ777_init,      FQ777_callback      },
+	#endif
+//OpenTX 2.3.x issue: DO NOT CHANGE ORDER below
+	#if defined(FRSKY_RX_CC2500_INO)
+		{PROTO_FRSKY_RX,   STR_FRSKY_RX,  STR_SUB_FRSKY_RX, FRCPPM, OPTION_RFTUNE,  0, 0, SW_CC2500, FRSKY_RX_init,   FRSKY_RX_callback   },
+	#endif
+	#if defined(FRSKYD_CC2500_INO)
+		{PROTO_FRSKYD,     STR_FRSKYD,    STR_SUBTYPE_FRSKYD,    2, OPTION_RFTUNE,  0, 0, SW_CC2500, FRSKYD_init,     FRSKYD_callback     },
+	#endif
+	#if defined(FRSKYV_CC2500_INO)
+		{PROTO_FRSKYV,      STR_FRSKYV,   NO_SUBTYPE,            0, OPTION_RFTUNE,  0, 0, SW_CC2500, FRSKYV_init,     FRSKYV_callback     },
+	#endif
+	#if defined(FRSKYX_CC2500_INO)
+		{PROTO_FRSKYX,     STR_FRSKYX,    STR_SUBTYPE_FRSKYX,    6, OPTION_RFTUNE,  1, 0, SW_CC2500, FRSKYX_init,     FRSKYX_callback     },
+		{PROTO_FRSKYX2,    STR_FRSKYX2,   STR_SUBTYPE_FRSKYX,    6, OPTION_RFTUNE,  1, 0, SW_CC2500, FRSKYX_init,     FRSKYX_callback     },
+	#endif
+//OpenTX 2.3.x issue: DO NOT CHANGE ORDER above
+	#if defined(FRSKYL_CC2500_INO)
+		{PROTO_FRSKYL,     STR_FRSKYL,    STR_SUBTYPE_FRSKYL,    2, OPTION_RFTUNE,  0, 0, SW_CC2500, FRSKYL_init,     FRSKYL_callback     },
+	#endif
+	#if defined(FRSKYR9_SX1276_INO)
+		#if MULTI_5IN1_INTERNAL == T18
+		{PROTO_FRSKY_R9,   STR_FRSKYR9,   STR_SUBTYPE_FRSKYR9,   8, OPTION_NONE,    1, 0, 0,         FRSKYR9_init,    FRSKYR9_callback    },
+		#else	// DIY & T-Lite
+		{PROTO_FRSKY_R9,   STR_FRSKYR9,   STR_SUBTYPE_FRSKYR9,   8, OPTION_RFPOWER, 1, 0, 0,         FRSKYR9_init,    FRSKYR9_callback    },
+		#endif
+	#endif
+	#if defined(FUTABA_CC2500_INO)
+		{PROTO_FUTABA,     STR_FUTABA,    STR_SUBTYPE_FUTABA,    1, OPTION_RFTUNE,  1, 1, SW_CC2500, SFHSS_init,      SFHSS_callback      },
+	#endif
+	#if defined(FX816_NRF24L01_INO)
+		{PROTO_FX816,      STR_FX816,     STR_SUBTYPE_FX816,     1, OPTION_NONE,    0, 0, SW_NRF,    FX816_init,      FX816_callback      },
+	#endif
+	#if defined(FY326_NRF24L01_INO)
+		{PROTO_FY326,      STR_FY326,     STR_SUBTYPE_FY326,     2, OPTION_NONE,    0, 0, SW_NRF,    FY326_init,      FY326_callback      },
+	#endif
+	#if defined(GD00X_CCNRF_INO)
+		{PROTO_GD00X,      STR_GD00X,     STR_SUBTYPE_GD00X,     2, OPTION_RFTUNE,  0, 0, SW_NRF,    GD00X_init,      GD00X_callback      },
+	#endif
+	#if defined(GW008_NRF24L01_INO)
+		{PROTO_GW008,      STR_GW008,     NO_SUBTYPE,            0, OPTION_NONE,    0, 0, SW_NRF,    GW008_init,      GW008_callback      },
+	#endif
+	#if defined(H8_3D_NRF24L01_INO)
+		{PROTO_H8_3D,      STR_H8_3D,     STR_SUBTYPE_H83D,      4, OPTION_NONE,    0, 0, SW_NRF,    H8_3D_init,      H8_3D_callback      },
+	#endif
+	#if defined(HEIGHT_A7105_INO)
+		{PROTO_HEIGHT,     STR_HEIGHT,    STR_SUBTYPE_HEIGHT,    2, OPTION_NONE,    0, 0, SW_A7105,  HEIGHT_init,     HEIGHT_callback     },
+	#endif
+	#if defined(HISKY_NRF24L01_INO)
+		{PROTO_HISKY,      STR_HISKY,     STR_SUBTYPE_HISKY,     2, OPTION_NONE,    1, 1, SW_NRF,    HISKY_init,      HISKY_callback      },
+	#endif
+	#if defined(HITEC_CC2500_INO)
+		{PROTO_HITEC,      STR_HITEC,     STR_SUBTYPE_HITEC,     3, OPTION_RFTUNE,  0, 0, SW_CC2500, HITEC_init,      HITEC_callback      },
+	#endif
+	#if defined(HONTAI_NRF24L01_INO)
+		{PROTO_HONTAI,     STR_HONTAI,    STR_SUBTYPE_HONTAI,    4, OPTION_NONE,    0, 0, SW_NRF,    HONTAI_init,     HONTAI_callback     },
+	#endif
+	#if defined(HOTT_CC2500_INO)
+		{PROTO_HOTT,       STR_HOTT,      STR_SUBTYPE_HOTT,      2, OPTION_RFTUNE,  1, 0, SW_CC2500, HOTT_init,       HOTT_callback       },
+	#endif
+	#if defined(HUBSAN_A7105_INO)
+		{PROTO_HUBSAN,     STR_HUBSAN,    STR_SUBTYPE_HUBSAN,    3, OPTION_VIDFREQ, 0, 0, SW_A7105,  HUBSAN_init,     HUBSAN_callback     },
+	#endif
+	#if defined(IKEAANSLUTA_CC2500_INO)
+		{PROTO_IKEAANSLUTA,STR_IKEAANSLUTA,NO_SUBTYPE,           0, OPTION_OPTION,  0, 0, SW_CC2500, IKEAANSLUTA_init,IKEAANSLUTA_callback },
+	#endif
+	#if defined(J6PRO_CYRF6936_INO)
+		{PROTO_J6PRO,      STR_J6PRO,     NO_SUBTYPE,            0, OPTION_NONE,    0, 1, SW_CYRF,   J6PRO_init,      J6PRO_callback      },
+	#endif
+	#if defined(JJRC345_NRF24L01_INO)
+		{PROTO_JJRC345,    STR_JJRC345,   STR_SUBTYPE_JJRC345,   2, OPTION_NONE,    0, 0, SW_NRF,    JJRC345_init,    JJRC345_callback    },
+	#endif
+	#if defined(JOYSWAY_A7105_INO)
+		{PROTO_JOYSWAY,    STR_JOYSWAY,   NO_SUBTYPE,            0, OPTION_NONE,    0, 0, SW_A7105,  JOYSWAY_init,    JOYSWAY_callback    },
+	#endif
+	#if defined(KF606_CCNRF_INO)
+		{PROTO_KF606,      STR_KF606,     NO_SUBTYPE,            0, OPTION_RFTUNE,  0, 0, SW_NRF,    KF606_init,      KF606_callback      },
+	#endif
+	#if defined(KN_NRF24L01_INO)
+		{PROTO_KN,         STR_KN,        STR_SUBTYPE_KN,        2, OPTION_NONE,    0, 0, SW_NRF,    KN_init,         KN_callback         },
+	#endif
+	#if defined(KYOSHO_A7105_INO)
+		{PROTO_KYOSHO,     STR_KYOSHO,    STR_SUBTYPE_KYOSHO,    2, OPTION_NONE,    0, 1, SW_A7105,  KYOSHO_init,     KYOSHO_callback     },
+	#endif
+	#if defined(LOLI_NRF24L01_INO)
+		{PROTO_LOLI,       STR_LOLI,      NO_SUBTYPE,            0, OPTION_NONE,    1, 0, SW_NRF,    LOLI_init,       LOLI_callback       },
+	#endif
+	#if defined(LOSI_CYRF6936_INO)
+		{PROTO_LOSI,       STR_LOSI,      NO_SUBTYPE,            0, OPTION_NONE,    0, 0, SW_CYRF,   LOSI_init,       LOSI_callback       },
+	#endif
+	#if defined(MJXQ_CCNRF_INO)
+		{PROTO_MJXQ,       STR_MJXQ,      STR_SUBTYPE_MJXQ,      7, OPTION_NONE,    0, 0, SW_NRF,    MJXQ_init,       MJXQ_callback       },
+	#endif
+	#if defined(MLINK_CYRF6936_INO)
+		{PROTO_MLINK,      STR_MLINK,     NO_SUBTYPE,            0, OPTION_NONE,    1, 0, SW_CYRF,   MLINK_init,      MLINK_callback      },
+	#endif
+	#if defined(MOULDKG_NRF24L01_INO)
+		{PROTO_MOULDKG,    STR_MOULDKG,   STR_SUBTYPE_MOULKG,    2, OPTION_OPTION,  0, 0, SW_NRF,    MOULDKG_init,    MOULDKG_callback    },
+	#endif
+	#if defined(MT99XX_CCNRF_INO)
+		{PROTO_MT99XX,     STR_MT99XX,    STR_SUBTYPE_MT99,      7, OPTION_NONE,    0, 0, SW_NRF,    MT99XX_init,     MT99XX_callback     },
+	#endif
+	#if defined(NCC1701_NRF24L01_INO)
+		{PROTO_NCC1701,    STR_NCC1701,   NO_SUBTYPE,            0, OPTION_NONE,    0, 0, SW_NRF,    NCC_init,        NCC_callback        },
+	#endif
+	#if defined(OMP_CCNRF_INO)
+		{PROTO_OMP,        STR_OMP,       NO_SUBTYPE,            0, OPTION_NONE,    0, 0, SW_NRF,    OMP_init,        OMP_callback        },
+	#endif
+	#if defined(PELIKAN_A7105_INO)
+		{PROTO_PELIKAN,    STR_PELIKAN,   STR_SUBTYPE_PELIKAN,   3, OPTION_NONE,    0, 1, SW_A7105,  PELIKAN_init,    PELIKAN_callback    },
+	#endif
+	#if defined(POTENSIC_NRF24L01_INO)
+		{PROTO_POTENSIC,   STR_POTENSIC,  STR_SUBTYPE_POTENSIC,  1, OPTION_NONE,    0, 0, SW_NRF,    POTENSIC_init,   POTENSIC_callback   },
+	#endif
+	#if defined(PROPEL_NRF24L01_INO)
+		{PROTO_PROPEL,     STR_PROPEL,    STR_SUBTYPE_PROPEL,    1, OPTION_NONE,    0, 0, SW_NRF,    PROPEL_init,     PROPEL_callback     },
+	#endif
+	#if defined(CX10_NRF24L01_INO)
+		{PROTO_Q2X2,       STR_Q2X2,      STR_SUBTYPE_Q2X2,      3, OPTION_NONE,    0, 0, SW_NRF,    CX10_init,       CX10_callback       },
+	#endif
+	#if defined(Q303_CCNRF_INO)
+		{PROTO_Q303,       STR_Q303,      STR_SUBTYPE_Q303,      4, OPTION_NONE,    0, 0, SW_NRF,    Q303_init,       Q303_callback       },
+	#endif
+	#if defined(Q90C_CCNRF_INO)
+		{PROTO_Q90C,       STR_Q90C,      NO_SUBTYPE,            0, OPTION_RFTUNE,  0, 0, SW_NRF,    Q90C_init,       Q90C_callback       },
+	#endif
+	#if defined(RLINK_CC2500_INO)
+		{PROTO_RLINK,      STR_RLINK,     STR_SUBTYPE_RLINK,     3, OPTION_RFTUNE,  0, 0, SW_CC2500, RLINK_init,      RLINK_callback      },
+	#endif
+	#if defined(REALACC_NRF24L01_INO)
+		{PROTO_REALACC,    STR_REALACC,   STR_SUBTYPE_REALACC,   1, OPTION_NONE,    0, 0, SW_NRF,    REALACC_init,    REALACC_callback    },
+	#endif
+	#if defined(REDPINE_CC2500_INO)
+		{PROTO_REDPINE,    STR_REDPINE,   STR_SUBTYPE_REDPINE,   2, OPTION_RFTUNE,  0, 0, SW_CC2500, REDPINE_init,    REDPINE_callback    },
+	#endif
+	#if defined(SCANNER_CC2500_INO)
+		{PROTO_SCANNER,    STR_SCANNER,   NO_SUBTYPE,            0, OPTION_NONE,    0, 0, SW_CC2500, SCANNER_init,    SCANNER_callback    },
+	#endif
+	#if defined(SHENQI_NRF24L01_INO)
+		{PROTO_SHENQI,     STR_SHENQI,    NO_SUBTYPE,            0, OPTION_NONE,    0, 0, SW_NRF,    SHENQI_init,     SHENQI_callback     },
+	#endif
+	#if defined(SKYARTEC_CC2500_INO)
+		{PROTO_SKYARTEC,   STR_SKYARTEC,  NO_SUBTYPE,            0, OPTION_RFTUNE,  0, 1, SW_CC2500, SKYARTEC_init,   SKYARTEC_callback   },
+	#endif
+	#if defined(SLT_CCNRF_INO)
+		{PROTO_SLT,        STR_SLT,       STR_SUBTYPE_SLT,       5, OPTION_RFTUNE,  0, 1, SW_NRF,    SLT_init,        SLT_callback        },
+	#endif
+	#if defined(SYMAX_NRF24L01_INO)
+		{PROTO_SYMAX,      STR_SYMAX,     STR_SUBTYPE_SYMAX,     2, OPTION_NONE,    0, 0, SW_NRF,    SYMAX_init,      SYMAX_callback      },
+	#endif
+	#if defined(TIGER_NRF24L01_INO)
+		{PROTO_TIGER,      STR_TIGER,     NO_SUBTYPE,            0, OPTION_NONE,    0, 0, SW_NRF,    TIGER_init,      TIGER_callback      },	
+	#endif
+	#if defined(TRAXXAS_CYRF6936_INO)
+		{PROTO_TRAXXAS,    STR_TRAXXAS,   STR_SUBTYPE_TRAXXAS,   1, OPTION_NONE,    0, 0, SW_CYRF,   TRAXXAS_init,    TRAXXAS_callback    },
+	#endif
+	#if defined(V2X2_NRF24L01_INO)
+		{PROTO_V2X2,       STR_V2X2,      STR_SUBTYPE_V2X2,      3, OPTION_NONE,    0, 0, SW_NRF,    V2X2_init,       V2X2_callback       },
+	#endif
+	#if defined(V761_NRF24L01_INO)
+		{PROTO_V761,       STR_V761,      STR_SUBTYPE_V761,      2, OPTION_NONE,    0, 0, SW_NRF,    V761_init,       V761_callback       },
+	#endif
+	#if defined(V911S_CCNRF_INO)
+		{PROTO_V911S,      STR_V911S,     STR_SUBTYPE_V911S,     2, OPTION_RFTUNE,  0, 0, SW_NRF,    V911S_init,      V911S_callback      },
+	#endif
+	#if defined(WK2x01_CYRF6936_INO)
+		{PROTO_WK2x01,     STR_WK2x01,    STR_SUBTYPE_WK2x01,    6, OPTION_NONE,    1, 1, SW_CYRF,   WK_init,         WK_callback         },
+	#endif
+	#if defined(WFLY_CYRF6936_INO)
+		{PROTO_WFLY,       STR_WFLY,      STR_SUBTYPE_WFLY,      1, OPTION_NONE,    1, 0, SW_CYRF,   WFLY_init,       WFLY_callback       },
+	#endif
+	#if defined(WFLY2_A7105_INO)
+		{PROTO_WFLY2,      STR_WFLY2,     STR_SUBTYPE_WFLY2,     1, OPTION_OPTION,  1, 0, SW_A7105,  WFLY2_init,      WFLY2_callback      },
+//		{PROTO_WFLY2,      STR_WFLY2,     STR_SUBTYPE_WFLY2,     1, OPTION_WBUS,    1, 0, SW_A7105,  WFLY2_init,      WFLY2_callback      },// crash OpenTX...
+	#endif
+	#if defined(XK_CCNRF_INO)
+		{PROTO_XK,         STR_XK,        STR_SUBTYPE_XK,        2, OPTION_RFTUNE,  0, 0, SW_NRF,    XK_init,         XK_callback         },	
+	#endif
+	#if defined(XN297DUMP_NRF24L01_INO)
+		{PROTO_XN297DUMP,  STR_XN297DUMP, STR_SUBTYPE_XN297DUMP, 6, OPTION_RFCHAN,  0, 0, SW_NRF,    XN297Dump_init,  XN297Dump_callback  },
+	#endif
+	#if defined(YD717_NRF24L01_INO)
+		{PROTO_YD717,      STR_YD717,     STR_SUBTYPE_YD717,     5, OPTION_NONE,    0, 0, SW_NRF,    YD717_init,      YD717_callback      },
+	#endif
+	#if defined(ZSX_NRF24L01_INO)
+		{PROTO_ZSX,        STR_ZSX,       STR_SUBTYPE_ZSX,       1, OPTION_NONE,    0, 0, SW_NRF,    ZSX_init,        ZSX_callback        },
+	#endif
+	#if defined(TEST_CC2500_INO)
+		{PROTO_TEST,       STR_TEST,      NO_SUBTYPE,            0, OPTION_RFTUNE,  0, 0, SW_NRF,    TEST_init,       TEST_callback       },
+	#endif
+	#if defined(NANORF_NRF24L01_INO)
+		{PROTO_NANORF,     STR_NANORF,    NO_SUBTYPE,            0, OPTION_NONE,    0, 0, SW_NRF,    NANORF_init,     NANORF_callback     },
+	#endif
+		{0xFF,             nullptr,       nullptr,               0, 0,              0, 0, 0,         nullptr,         nullptr             }
+};

Multiprotocol/Multiprotocol.h

@@ -18,15 +18,16 @@
 //******************
 #define VERSION_MAJOR		1
 #define VERSION_MINOR		3
-#define VERSION_REVISION	1
-#define VERSION_PATCH_LEVEL	24
+#define VERSION_REVISION	2
+#define VERSION_PATCH_LEVEL	86
+
+#define MODE_SERIAL 0
 
 //******************
 // Protocols
 //******************
 enum PROTOCOLS
 {
-	MODE_SERIAL		= 0,	// Serial commands
 	PROTO_FLYSKY 	= 1,	// =>A7105
 	PROTO_HUBSAN	= 2,	// =>A7105
 	PROTO_FRSKYD	= 3,	// =>CC2500
@@ -47,7 +48,7 @@ enum PROTOCOLS
 	PROTO_MJXQ		= 18,	// =>NRF24L01
 	PROTO_SHENQI	= 19,	// =>NRF24L01
 	PROTO_FY326		= 20,	// =>NRF24L01
-	PROTO_SFHSS		= 21,	// =>CC2500
+	PROTO_FUTABA	= 21,	// =>CC2500
 	PROTO_J6PRO		= 22,	// =>CYRF6936
 	PROTO_FQ777		= 23,	// =>NRF24L01
 	PROTO_ASSAN		= 24,	// =>NRF24L01
@@ -79,7 +80,7 @@ enum PROTOCOLS
 	PROTO_REDPINE	= 50,	// =>CC2500
 	PROTO_POTENSIC	= 51,	// =>NRF24L01
 	PROTO_ZSX		= 52,	// =>NRF24L01
-	PROTO_FLYZONE	= 53,	// =>A7105
+	PROTO_HEIGHT	= 53,	// =>A7105
 	PROTO_SCANNER	= 54,	// =>CC2500
 	PROTO_FRSKY_RX	= 55,	// =>CC2500
 	PROTO_AFHDS2A_RX= 56,	// =>A7105
@@ -99,8 +100,25 @@ enum PROTOCOLS
 	PROTO_DSM_RX	= 70,	// =>CYRF6936
 	PROTO_JJRC345	= 71,	// =>NRF24L01
 	PROTO_Q90C		= 72,	// =>NRF24L01 or CC2500
+	PROTO_KYOSHO	= 73,	// =>A7105
+	PROTO_RLINK		= 74,	// =>CC2500
+	PROTO_REALACC	= 76,	// =>NRF24L01
+	PROTO_OMP		= 77,	// =>CC2500 & NRF24L01
+	PROTO_MLINK		= 78,	// =>CYRF6936
+	PROTO_WFLY2		= 79,	// =>A7105
+	PROTO_E016HV2	= 80,	// =>CC2500 & NRF24L01
+	PROTO_E010R5	= 81,	// =>CYRF6936
+	PROTO_LOLI		= 82,	// =>NRF24L01
+	PROTO_E129		= 83,	// =>CYRF6936
+	PROTO_JOYSWAY	= 84,	// =>A7105
+	PROTO_E016H		= 85,	// =>NRF24L01
+	PROTO_CONFIG	= 86,	// Module config
+	PROTO_IKEAANSLUTA = 87, // =>CC2500
+	PROTO_WILLIFM	= 88,	// 27/35ab/40/41/72 MHz module external project
+	PROTO_LOSI		= 89,	// =>CYRF6936
+	PROTO_MOULDKG	= 90,	// =>NRF24L01
 
-	PROTO_FAKE		= 126,	// =>CC2500+NRF24L01
+	PROTO_NANORF	= 126,	// =>NRF24L01
 	PROTO_TEST		= 127,	// =>CC2500
 };
 
@@ -112,7 +130,7 @@ enum Flysky
 	V912	= 3,
 	CX20	= 4,
 };
-enum Flyzone
+enum Height
 {
 	FZ410	= 0,
 };
@@ -128,6 +146,8 @@ enum AFHDS2A
 	PPM_IBUS = 1,
 	PWM_SBUS = 2,
 	PPM_SBUS = 3,
+	PWM_IB16 = 4,
+	PPM_IB16 = 5,
 };
 enum Hisky
 {
@@ -136,11 +156,12 @@ enum Hisky
 };
 enum DSM
 {
-	DSM2_22	= 0,
-	DSM2_11	= 1,
-	DSMX_22	= 2,
-	DSMX_11	= 3,
-	DSM_AUTO = 4,
+	DSM2_1F		= 0,
+	DSM2_2F		= 1,
+	DSMX_1F		= 2,
+	DSMX_2F		= 3,
+	DSM_AUTO	= 4,
+	DSMR		= 5,
 };
 enum YD717
 {       			
@@ -207,6 +228,8 @@ enum MT99XX
 	YZ		= 2,
 	LS		= 3,
 	FY805	= 4,
+	A180	= 5,
+	DRAGON	= 6,
 };
 enum MJXQ
 {
@@ -225,11 +248,12 @@ enum FRSKYD
 };
 enum FRSKYX
 {
-	CH_16	= 0,
-	CH_8	= 1,
-	EU_16	= 2,
-	EU_8	= 3,
-	XCLONE	= 4,
+	CH_16		= 0,
+	CH_8		= 1,
+	EU_16		= 2,
+	EU_8		= 3,
+	XCLONE_16	= 4,
+	XCLONE_8	= 5,
 };
 enum HONTAI
 {
@@ -337,6 +361,8 @@ enum XN297DUMP
 	XN297DUMP_1M	= 1,
 	XN297DUMP_2M	= 2,
 	XN297DUMP_AUTO	= 3,
+	XN297DUMP_NRF	= 4,
+	XN297DUMP_CC2500	= 5,
 };
 enum FRSKY_R9
 {
@@ -344,6 +370,10 @@ enum FRSKY_R9
 	R9_868		= 1,
 	R9_915_8CH	= 2,
 	R9_868_8CH	= 3,
+	R9_FCC		= 4,
+	R9_EU		= 5,
+	R9_FCC_8CH	= 6,
+	R9_EU_8CH	= 7,
 };
 enum ESKY
 {
@@ -355,6 +385,8 @@ enum FRSKY_RX
 {
 	FRSKY_RX	= 0,
 	FRSKY_CLONE	= 1,
+	FRSKY_ERASE	= 2,
+	FRSKY_CPPM  = 3,
 };
 
 enum FRSKYL
@@ -373,6 +405,7 @@ enum PELIKAN
 {
 	PELIKAN_PRO	= 0,
 	PELIKAN_LITE= 1,
+	PELIKAN_SCX24=2,
 };
 
 enum V761
@@ -381,12 +414,44 @@ enum V761
 	V761_4CH	= 1,
 };
 
+enum HEIGHT
+{
+	HEIGHT_5CH	= 0,
+	HEIGHT_8CH	= 1,
+};
+
+enum KYOSHO
+{
+	KYOSHO_FHSS	= 0,
+	KYOSHO_HYPE	= 1,
+};
+
+enum JJRC345
+{
+	JJRC345		= 0,
+	SKYTMBLR	= 1,
+};
+
+enum RLINK
+{
+	RLINK_SURFACE	= 0,
+	RLINK_AIR		= 1,
+	RLINK_DUMBORC	= 2,
+};
+
+enum MOULDKG
+{
+	MOULDKG_ANALOG	= 0,
+	MOULDKG_DIGIT	= 1,
+};
+
 #define NONE 		0
 #define P_HIGH		1
 #define P_LOW		0
 #define AUTOBIND	1
 #define NO_AUTOBIND	0
 
+//PPM protocols
 struct PPM_Parameters
 {
 	uint8_t protocol;
@@ -398,6 +463,33 @@ struct PPM_Parameters
 	uint32_t chan_order;
 };
 
+//Callback
+typedef uint16_t (*uint16_function_t) (void);	//pointer to a function with no parameters which return an uint16_t integer
+typedef void     (*void_function_t  ) (void);	//pointer to a function with no parameters which returns nothing
+
+//Protocols definition
+struct __attribute__((__packed__)) mm_protocol_definition {
+	uint8_t protocol;
+	const char *ProtoString;
+	const char *SubProtoString;
+	uint8_t nbrSubProto        : 4;
+	uint8_t optionType         : 4;
+	uint8_t failSafe           : 1;
+	uint8_t chMap              : 1;
+	uint8_t rfSwitch           : 2;
+	void_function_t		Init;
+	uint16_function_t	CallBack;
+};
+extern const mm_protocol_definition multi_protocols[];
+
+enum RF_SWITCH
+{
+	SW_A7105	= 0,	//antenna RF1
+	SW_CC2500	= 1,	//antenna RF2
+	SW_NRF		= 2,	//antenna RF3
+	SW_CYRF		= 3,	//antenna RF4
+};
+
 // Telemetry
 enum MultiPacketTypes
 {
@@ -415,17 +507,13 @@ enum MultiPacketTypes
 	MULTI_TELEMETRY_AFHDS2A_AC		= 12,
 	MULTI_TELEMETRY_RX_CHANNELS		= 13,
 	MULTI_TELEMETRY_HOTT			= 14,
+	MULTI_TELEMETRY_MLINK			= 15,
+	MULTI_TELEMETRY_CONFIG			= 16,
 };
 
 // Macros
 #define NOP() __asm__ __volatile__("nop")
 
-//***************
-//***  Tests  ***
-//***************
-#define IS_FAILSAFE_PROTOCOL	( (protocol==PROTO_HISKY && sub_protocol==HK310) || protocol==PROTO_AFHDS2A || protocol==PROTO_DEVO || protocol==PROTO_SFHSS || protocol==PROTO_WK2x01 || protocol== PROTO_HOTT || protocol==PROTO_FRSKYX || protocol==PROTO_FRSKYX2 || protocol==PROTO_FRSKY_R9)
-#define IS_CHMAP_PROTOCOL		( (protocol==PROTO_HISKY && sub_protocol==HK310) || protocol==PROTO_AFHDS2A || protocol==PROTO_DEVO || protocol==PROTO_SFHSS || protocol==PROTO_WK2x01 || protocol== PROTO_DSM || protocol==PROTO_SLT || protocol==PROTO_FLYSKY || protocol==PROTO_ESKY || protocol==PROTO_J6PRO || protocol==PROTO_PELIKAN  || protocol==PROTO_SKYARTEC || protocol==PROTO_ESKY150V2 || protocol==PROTO_DSM_RX)
-
 //***************
 //***  Flags  ***
 //***************
@@ -514,6 +602,11 @@ enum MultiPacketTypes
 #define DISABLE_TELEM_on		protocol_flags3 |= _BV(3)
 #define IS_DISABLE_TELEM_on		( ( protocol_flags3 & _BV(3) ) !=0 )
 #define IS_DISABLE_TELEM_off	( ( protocol_flags3 & _BV(3) ) ==0 )
+//Valid/invalid sub_proto
+#define SUB_PROTO_VALID			protocol_flags3 &= ~_BV(6)
+#define SUB_PROTO_INVALID		protocol_flags3 |= _BV(6)
+#define IS_SUB_PROTO_INVALID	( ( protocol_flags3 & _BV(6) ) !=0 )
+#define IS_SUB_PROTO_VALID		( ( protocol_flags3 & _BV(6) ) ==0 )
 //LBT power
 #define LBT_POWER_off		protocol_flags3 &= ~_BV(7)
 #define LBT_POWER_on		protocol_flags3 |= _BV(7)
@@ -530,8 +623,9 @@ enum MultiPacketTypes
 //********************
 #if defined(STM32_BOARD) && (defined (DEBUG_SERIAL) || defined (ARDUINO_MULTI_DEBUG))
 	uint16_t debug_time=0;
-	#define debug(msg, ...)  {char debug_buf[64]; sprintf(debug_buf, msg, ##__VA_ARGS__); Serial.write(debug_buf);}
-	#define debugln(msg, ...)  {char debug_buf[64]; sprintf(debug_buf, msg "\r\n", ##__VA_ARGS__); Serial.write(debug_buf);}
+	char debug_buf[64];
+	#define debug(msg, ...)  { sprintf(debug_buf, msg, ##__VA_ARGS__); Serial.write(debug_buf);}
+	#define debugln(msg, ...)  { sprintf(debug_buf, msg "\r\n", ##__VA_ARGS__); Serial.write(debug_buf);}
 	#define debug_time(msg)  { uint16_t debug_time_TCNT1=TCNT1; debug_time=debug_time_TCNT1-debug_time; debug(msg "%u", debug_time>>1); debug_time=debug_time_TCNT1; }
 	#define debugln_time(msg)  { uint16_t debug_time_TCNT1=TCNT1; debug_time=debug_time_TCNT1-debug_time; debug(msg "%u\r\n", debug_time>>1); debug_time=debug_time_TCNT1; }
 #else
@@ -587,17 +681,17 @@ enum {
 };
 
 // A7105 power
-//	Power amp is ~+16dBm so:
+// The numbers do not take into account any outside amplifier
 enum A7105_POWER
 {
-	A7105_POWER_0 = 0x00<<3 | 0x00,	// TXPOWER_100uW  = -23dBm == PAC=0 TBG=0
-	A7105_POWER_1 = 0x00<<3 | 0x01,	// TXPOWER_300uW  = -20dBm == PAC=0 TBG=1
-	A7105_POWER_2 = 0x00<<3 | 0x02,	// TXPOWER_1mW    = -16dBm == PAC=0 TBG=2
-	A7105_POWER_3 = 0x00<<3 | 0x04,	// TXPOWER_3mW    = -11dBm == PAC=0 TBG=4
-	A7105_POWER_4 = 0x01<<3 | 0x05,	// TXPOWER_10mW   =  -6dBm == PAC=1 TBG=5
-	A7105_POWER_5 = 0x02<<3 | 0x07,	// TXPOWER_30mW   =   0dBm == PAC=2 TBG=7
-	A7105_POWER_6 = 0x03<<3 | 0x07,	// TXPOWER_100mW  =   1dBm == PAC=3 TBG=7
-	A7105_POWER_7 = 0x03<<3 | 0x07	// TXPOWER_150mW  =   1dBm == PAC=3 TBG=7
+	A7105_POWER_0 = 0x00<<3 | 0x00,	// -23dBm == PAC=0 TBG=0
+	A7105_POWER_1 = 0x00<<3 | 0x01,	// -20dBm == PAC=0 TBG=1
+	A7105_POWER_2 = 0x00<<3 | 0x02,	// -16dBm == PAC=0 TBG=2
+	A7105_POWER_3 = 0x00<<3 | 0x04,	// -11dBm == PAC=0 TBG=4
+	A7105_POWER_4 = 0x01<<3 | 0x05,	//  -6dBm == PAC=1 TBG=5
+	A7105_POWER_5 = 0x02<<3 | 0x07,	//   0dBm == PAC=2 TBG=7
+	A7105_POWER_6 = 0x03<<3 | 0x07,	//  +1dBm == PAC=3 TBG=7
+	A7105_POWER_7 = 0x03<<3 | 0x07	//  +1dBm == PAC=3 TBG=7
 };
 #define A7105_HIGH_POWER	A7105_POWER_7
 #define	A7105_LOW_POWER		A7105_POWER_3
@@ -605,14 +699,13 @@ enum A7105_POWER
 #define	A7105_BIND_POWER	A7105_POWER_0
 
 // NRF Power
-// Power setting is 0..3 for nRF24L01
-// Claimed power amp for nRF24L01 from eBay is 20dBm. 
+// The numbers do not take into account any outside amplifier
 enum NRF_POWER
-{						//      Raw            w 20dBm PA
-	NRF_POWER_0 = 0x00,	// 0 : -18dBm  (16uW)   2dBm (1.6mW)
-	NRF_POWER_1 = 0x01,	// 1 : -12dBm  (60uW)   8dBm   (6mW)
-	NRF_POWER_2 = 0x02,	// 2 :  -6dBm (250uW)  14dBm  (25mW)
-	NRF_POWER_3 = 0x03	// 3 :   0dBm   (1mW)  20dBm (100mW)
+{
+	NRF_POWER_0 = 0x00,	// -18dBm
+	NRF_POWER_1 = 0x01,	// -12dBm
+	NRF_POWER_2 = 0x02,	//  -6dBm
+	NRF_POWER_3 = 0x03	//   0dBm
 };
 #define NRF_HIGH_POWER		NRF_POWER_3
 #define	NRF_LOW_POWER		NRF_POWER_1
@@ -649,6 +742,7 @@ enum CC2500_POWER
 #define CC2500_BIND_POWER	CC2500_POWER_1
 
 // CYRF power
+// The numbers do not take into account any outside amplifier
 enum CYRF_POWER
 {
 	CYRF_POWER_0 = 0x00,	// -35dbm
@@ -665,6 +759,10 @@ enum CYRF_POWER
 #define	CYRF_RANGE_POWER	CYRF_POWER_1	// 1/30 of the full power distance
 #define	CYRF_BIND_POWER		CYRF_POWER_0
 
+// SX1276
+#define JP_T18		1
+#define JP_TLite	2
+
 enum TXRX_State {
 	TXRX_OFF,
 	TX_EN,
@@ -685,6 +783,8 @@ enum {
 #define SPEED_125K	3
 
 /** EEPROM Layout */
+#define EEPROM_CID_INIT_OFFSET	0		// 1 byte flag that Cyrf ID is initialized
+#define EEPROM_CID_OFFSET		1		// 6 bytes Cyrf ID
 #define EEPROM_ID_OFFSET		10		// Module ID (4 bytes)
 #define EEPROM_BANK_OFFSET		15		// Current bank number (1 byte)
 #define EEPROM_ID_VALID_OFFSET	20		// 1 byte flag that ID is valid
@@ -701,7 +801,17 @@ enum {
 #define FRSKYX_CLONE_EEPROM_OFFSET	822	// (1) format + (3) TX ID + (47) channels, 51 bytes, end is 873
 #define FRSKYX2_CLONE_EEPROM_OFFSET	873	// (1) format + (3) TX ID, 4 bytes, end is 877
 #define DSM_RX_EEPROM_OFFSET	877		// (4) TX ID + format, 5 bytes, end is 882
-//#define CONFIG_EEPROM_OFFSET 	882		// Current configuration of the multimodule
+#define MOULDKG_EEPROM_OFFSET	882		// RX ID, 3 bytes per model, end is 882+64*3=1074
+//#define CONFIG_EEPROM_OFFSET 	1074	// Current configuration of the multimodule
+
+/* STM32 Flash Size */
+#ifndef DISABLE_FLASH_SIZE_CHECK
+	#ifdef MCU_STM32F103C8
+		#define MCU_EXPECTED_FLASH_SIZE 64	// STM32F103C8 has 64KB of flash space
+	#else
+		#define MCU_EXPECTED_FLASH_SIZE 128	// STM32F103CB has 128KB of flash space
+	#endif
+#endif
 
 //****************************************
 //*** MULTI protocol serial definition ***
@@ -717,8 +827,9 @@ Serial: 100000 Baud 8e2      _ xxxx xxxx p --
 				0x54	sub_protocol values are 32..63	Stream contains channels
 				0x57	sub_protocol values are 0..31	Stream contains failsafe
 				0x56	sub_protocol values are 32..63	Stream contains failsafe
+				Note: V2 adds the 2 top bits to extend the number of protocols to 256 in Stream[26]
   Stream[1]   = sub_protocol|BindBit|RangeCheckBit|AutoBindBit;
-   sub_protocol is 0..31 (bits 0..4), value should be added with 32 if Stream[0] = 0x54 | 0x56
+   sub_protocol is 0..31 (bits 0..4)
 				Reserved	0
 				Flysky		1
 				Hubsan		2
@@ -740,7 +851,7 @@ Serial: 100000 Baud 8e2      _ xxxx xxxx p --
 				MJXQ		18
 				SHENQI		19
 				FY326		20
-				SFHSS		21
+				Futaba		21
 				J6PRO		22
 				FQ777		23
 				ASSAN		24
@@ -772,7 +883,7 @@ Serial: 100000 Baud 8e2      _ xxxx xxxx p --
 				REDPINE		50
 				POTENSIC	51
 				ZSX			52
-				FLYZONE		53
+				HEIGHT		53
 				SCANNER		54
 				FRSKY_RX	55
 				AFHDS2A_RX	56
@@ -792,6 +903,18 @@ Serial: 100000 Baud 8e2      _ xxxx xxxx p --
 				DSM_RX		70
 				JJRC345		71
 				Q90C		72
+				KYOSHO		73
+				RLINK		74
+				REALACC		76
+				OMP			77
+				MLINK		78
+				WFLY2		79
+				E016HV2		80
+				E010R5		81
+				LOLI		82
+				E129		83
+				JOYSWAY		84
+				E016H		85
    BindBit=>		0x80	1=Bind/0=No
    AutoBindBit=>	0x40	1=Yes /0=No
    RangeCheck=>		0x20	1=Yes /0=No
@@ -812,10 +935,10 @@ Serial: 100000 Baud 8e2      _ xxxx xxxx p --
 			Hisky		0
 			HK310		1
 		sub_protocol==DSM
-			DSM2_22 	0
-			DSM2_11 	1
-			DSMX_22 	2
-			DSMX_11 	3
+			DSM2_1F 	0
+			DSM2_2F 	1
+			DSMX_1F 	2
+			DSMX_2F 	3
 			DSM_AUTO	4
 		sub_protocol==YD717
 			YD717		0
@@ -889,6 +1012,8 @@ Serial: 100000 Baud 8e2      _ xxxx xxxx p --
 			PPM_IBUS	1
 			PWM_SBUS	2
 			PPM_SBUS	3
+			PWM_IB16	4
+			PPM_IB16	5
 		sub_protocol==V2X2
 			V2X2		0
 			JXD506		1
@@ -935,7 +1060,6 @@ Serial: 100000 Baud 8e2      _ xxxx xxxx p --
 		sub_protocol==E01X
 			E012		0
 			E015		1
-			E016H		2
 		sub_protocol==GD00X
 			GD_V1		0
 			GD_V2		1
@@ -958,6 +1082,10 @@ Serial: 100000 Baud 8e2      _ xxxx xxxx p --
 			R9_868		1
 			R9_915_8CH	2
 			R9_868_8CH	3
+			R9_FCC		4
+			R9_EU		5
+			R9_FCC_8CH	6
+			R9_EU_8CH	7
 		sub_protocol==ESKY
 			ESKY_STD	0
 			ESKY_ET4	1
@@ -973,9 +1101,20 @@ Serial: 100000 Baud 8e2      _ xxxx xxxx p --
 		sub_protocol==PELIKAN
 			PELIKAN_PRO		0
 			PELIKAN_LITE	1
+			PELIKAN_SCX24	2
 		sub_protocol==V761
 			V761_3CH	0
 			V761_4CH	1
+		sub_protocol==HEIGHT
+			HEIGHT_5CH	0
+			HEIGHT_8CH	1
+		sub_protocol==JJRC345
+			JJRC345		0
+			SKYTMBLR	1
+		sub_protocol==RLINK
+			RLINK_SURFACE	0
+			RLINK_AIR		1
+			RLINK_DUMBORC	2
 
    Power value => 0x80	0=High/1=Low
   Stream[3]   = option_protocol;
@@ -1002,37 +1141,11 @@ Serial: 100000 Baud 8e2      _ xxxx xxxx p --
       FrSkyX and FrSkyX2: Stream[27] during bind Telem on=0x00,off=0x01 | CH1-8=0x00,CH9-16=0x02
       FrSkyX and FrSkyX2: Stream[27..34] during normal operation unstuffed SPort data to be sent
 	  HoTT: Stream[27] 1 byte for telemetry type
+	  DSM: Stream[27..33] Forward Programming
 */
 /*
-  Multimodule Status
-  Based on #define MULTI_STATUS
-
-  Serial: 100000 Baud 8e2 (same as input)
-
-  Format: header (2 bytes) + data (variable)
-   [0] = 'M' (0x4d)
-   [1] Length (excluding the 2 header bytes)
-   [2-xx] data
-
-  Type = 0x01 Multimodule Status:
-   [2] Flags
-   0x01 = Input signal detected
-   0x02 = Serial mode enabled
-   0x04 = Protocol is valid
-   0x08 = Module is in binding mode
-   0x10 = Module waits a bind event to load the protocol
-   0x20 = Current protocol supports failsafe
-   0x40 = Current protocol supports disable channel mapping
-   0x80 = Data buffer is almost full
-   [3] major
-   [4] minor
-   [5] revision
-   [6] patchlevel,
-   version of multi code, should be displayed as major.minor.revision.patchlevel
-*/
-/*
-  Multiprotocol telemetry/command definition for OpenTX
-  Based on #define MULTI_TELEMETRY enables OpenTX to get the multimodule status and select the correct telemetry type automatically.
+  Multiprotocol telemetry/command definition for OpenTX and erskyTX
+  Based on #define MULTI_TELEMETRY enables OpenTX and erskyTX to get the multimodule status and select the correct telemetry type automatically.
 
   Serial: 100000 Baud 8e2 (same as input)
 
@@ -1073,16 +1186,17 @@ Serial: 100000 Baud 8e2      _ xxxx xxxx p --
    [11] Prev valid protocol number, can be used to skip invalid protocols
    [12..18] Protocol name [7], not null terminated if prototcol len == 7
    [19>>4] Option text to be displayed: 
-			OPTION_NONE		0
-			OPTION_OPTION	1
-			OPTION_RFTUNE	2
-			OPTION_VIDFREQ	3
-			OPTION_FIXEDID	4
-			OPTION_TELEM	5
-			OPTION_SRVFREQ	6
-			OPTION_MAXTHR	7
-			OPTION_RFCHAN	8
-			OPTION_RFPOWER	9
+			OPTION_NONE		0	Hidden field
+			OPTION_OPTION	1	"Option:"		value=-128..0(default)..127
+			OPTION_RFTUNE	2	"RF freq tune:"	value=-128..0(default)..127
+			OPTION_VIDFREQ	3	"Video freq:"	value=-128..0(default)..127
+			OPTION_FIXEDID	4	"ID type:"		value="Auto":0(default), "Fixed":1
+			OPTION_TELEM	5	"Telem:"		value="Off":0(default), "On":1, "Off+Aux":2, "On+Aux":3
+			OPTION_SRVFREQ	6	"Servo freq(Hz):"	value="50":0(default).."400":70 => display=50+5*option with option=0..70
+			OPTION_MAXTHR	7	"Max throw:"	value="Disabled":0, "Enabled":1
+			OPTION_RFCHAN	8	"Select RF chan:"	value=-128..0(default)..127
+			OPTION_RFPOWER	9	"RF power:"		"1.6mW":0(default),"2.0mW":1,"2.5mW":2,"3.2mW":3,"4.0mW":4,"5.0mW":5,"6.3mW":6,"7.9mW":7,"10mW\0":8,"13mW\0":9,"16mW\0":10,"20mW\0":11,"25mW\0":12,"32mW\0":13,"40mW\0":14,"50mW\0":15
+			OPTION_WBUS		10	"Output:"		"WBUS":0(default),"PPM":1
    [19&0x0F] Number of sub protocols
    [20..27] Sub protocol name [8], not null terminated if sub prototcol len == 8
    If the current protocol is invalid [12..27] are all 0x00.
@@ -1156,4 +1270,14 @@ Serial: 100000 Baud 8e2      _ xxxx xxxx p --
    data[3] = page
    data[4-13] = data
 
+  Type 0x0F M-Link telemetry
+   length: 10
+   data[0] = TX_RSSI
+   data[1] = TX_LQI
+   data[2] = telem_type
+   data[3-9] = data
+
+  Type 0x10 Config telemetry
+   length: 22
+   data[0..21] = Config data
 */

Multiprotocol/NCC1701_nrf24l01.ino

@@ -31,25 +31,16 @@ enum {
 	NCC_RX3,
 };
 
-static void __attribute__((unused)) NCC_init()
+static void __attribute__((unused)) NCC_RF_init()
 {
 	NRF24L01_Initialize();
-	NRF24L01_SetTxRxMode(TX_EN);
 
-	NRF24L01_WriteReg(NRF24L01_03_SETUP_AW, 0x03);     // 5-byte RX/TX address
 	NRF24L01_WriteRegisterMulti(NRF24L01_0A_RX_ADDR_P0, (uint8_t*)"\xE7\xE7\xC7\xD7\x67",5);
 	NRF24L01_WriteRegisterMulti(NRF24L01_10_TX_ADDR,    (uint8_t*)"\xE7\xE7\xC7\xD7\x67",5);
 	
-	NRF24L01_FlushTx();
-	NRF24L01_FlushRx();
-	NRF24L01_WriteReg(NRF24L01_07_STATUS, 0x70);			// Clear data ready, data sent, and retransmit
-	NRF24L01_WriteReg(NRF24L01_01_EN_AA, 0x00);				// No Auto Acknowledgment on all data pipes
-	NRF24L01_WriteReg(NRF24L01_02_EN_RXADDR, 0x01);			// Enable data pipe 0 only
-	NRF24L01_WriteReg(NRF24L01_11_RX_PW_P0, NCC_RX_PACKET_LEN);	// Enable rx pipe 0
-	NRF24L01_SetBitrate(NRF24L01_BR_250K);					// NRF24L01_BR_1M, NRF24L01_BR_2M, NRF24L01_BR_250K
-	NRF24L01_SetPower();
-	NRF24L01_FlushRx();
-	NRF24L01_WriteReg(NRF24L01_00_CONFIG, (0 << NRF24L01_00_EN_CRC)   // switch to TX mode and disable CRC
+	NRF24L01_WriteReg(NRF24L01_11_RX_PW_P0, NCC_RX_PACKET_LEN);			// Enable rx pipe 0
+	NRF24L01_SetBitrate(NRF24L01_BR_250K);								// NRF24L01_BR_1M, NRF24L01_BR_2M, NRF24L01_BR_250K
+	NRF24L01_WriteReg(NRF24L01_00_CONFIG, (0 << NRF24L01_00_EN_CRC)		// switch to TX mode and disable CRC
 										| (1 << NRF24L01_00_CRCO)
 										| (1 << NRF24L01_00_PWR_UP)
 										| (0 << NRF24L01_00_PRIM_RX));
@@ -58,11 +49,11 @@ static void __attribute__((unused)) NCC_init()
 const uint8_t NCC_xor[]={0x80, 0x44, 0x64, 0x75, 0x6C, 0x71, 0x2A, 0x36, 0x7C, 0xF1, 0x6E, 0x52, 0x09, 0x9D};
 static void __attribute__((unused)) NCC_Crypt_Packet()
 {
-	uint16_t crc=0;
+	crc=0;
 	for(uint8_t i=0; i< NCC_TX_PACKET_LEN-2; i++)
 	{
 		packet[i]^=NCC_xor[i];
-		crc=crc16_update(crc, packet[i], 8);
+		crc16_update(packet[i], 8);
 	}
 	crc^=0x60DE;
 	packet[NCC_TX_PACKET_LEN-2]=crc>>8;
@@ -70,11 +61,11 @@ static void __attribute__((unused)) NCC_Crypt_Packet()
 }
 static boolean __attribute__((unused)) NCC_Decrypt_Packet()
 {
-	uint16_t crc=0;
+	crc=0;
 	debug("RX: ");
 	for(uint8_t i=0; i< NCC_RX_PACKET_LEN-2; i++)
 	{
-		crc=crc16_update(crc, packet[i], 8);
+		crc16_update( packet[i], 8);
 		packet[i]^=NCC_xor[i];
 		debug("%02X ",packet[i]);
 	}
@@ -247,7 +238,7 @@ const uint8_t PROGMEM NCC_TX_DATA[][6]= {
 	{ 0xC2, 0x93, 0x55, 0x44, 0x4C, 0x0B },
 };
 
-uint16_t initNCC(void)
+void NCC_init(void)
 {
 	BIND_IN_PROGRESS;	// autobind protocol
 	
@@ -269,9 +260,8 @@ uint16_t initNCC(void)
 	hopping_frequency[4]=0x08;	// bind channel 1
 	hopping_frequency[5]=0x2A;	// bind channel 2
 	hopping_frequency_no=4;		// start with bind
-	NCC_init();
+	NCC_RF_init();
 	phase=NCC_BIND_TX1;
-	return 10000;
 }
 
 #endif

Multiprotocol/NRF24l01_SPI.ino

@@ -16,7 +16,7 @@
 
 #ifdef NRF24L01_INSTALLED
 #include "iface_nrf24l01.h"
-
+#include "iface_xn297.h"
 
 //---------------------------
 // NRF24L01+ SPI Specific Functions
@@ -28,7 +28,19 @@ void NRF24L01_Initialize()
 {
     rf_setup = 0x09;
 	prev_power = 0x00;	// Make sure prev_power is inline with current power
-	XN297_SetScrambledMode(XN297_SCRAMBLED);
+
+	//Load most likely default NRF config
+	NRF24L01_FlushTx();
+	NRF24L01_FlushRx();
+	NRF24L01_WriteReg(NRF24L01_01_EN_AA,		0x00);	// No Auto Acknowldgement on all data pipes
+	NRF24L01_WriteReg(NRF24L01_02_EN_RXADDR,	0x01); 	// Enable data pipe 0 only
+	NRF24L01_WriteReg(NRF24L01_03_SETUP_AW,		0x03);	// 5 bytes rx/tx address
+	NRF24L01_WriteReg(NRF24L01_04_SETUP_RETR,	0x00); 	// no retransmits
+	NRF24L01_SetBitrate(NRF24L01_BR_1M);             	// 1Mbps
+	NRF24L01_WriteReg(NRF24L01_1C_DYNPD, 0x00);       	// Disable dynamic payload length on all pipes
+	NRF24L01_WriteReg(NRF24L01_1D_FEATURE, 0x01);     	// Set feature bits off and enable the command NRF24L01_B0_TX_PYLD_NOACK
+	NRF24L01_SetPower();
+	NRF24L01_SetTxRxMode(TX_EN);						// Clear data ready, data sent, retransmit and enable CRC 16bits, ready for TX
 }  
 
 void NRF24L01_WriteReg(uint8_t reg, uint8_t data)
@@ -117,13 +129,13 @@ static uint8_t NRF24L01_GetDynamicPayloadSize()
     return len;
 }
 
-void NRF24L01_Activate(uint8_t code)
+/*void NRF24L01_Activate(uint8_t code)
 {
 	NRF_CSN_off;
 	SPI_Write(ACTIVATE);
 	SPI_Write(code);
 	NRF_CSN_on;
-}
+}*/
 
 void NRF24L01_SetBitrate(uint8_t bitrate)
 {
@@ -183,11 +195,11 @@ void NRF24L01_SetPower()
 
 void NRF24L01_SetTxRxMode(enum TXRX_State mode)
 {
+	NRF24L01_WriteReg(NRF24L01_07_STATUS, (1 << NRF24L01_07_RX_DR)    //reset the flag(s)
+										| (1 << NRF24L01_07_TX_DS)
+										| (1 << NRF24L01_07_MAX_RT));
 	if(mode == TX_EN) {
 		NRF_CE_off;
-		NRF24L01_WriteReg(NRF24L01_07_STATUS, (1 << NRF24L01_07_RX_DR)    //reset the flag(s)
-											| (1 << NRF24L01_07_TX_DS)
-											| (1 << NRF24L01_07_MAX_RT));
 		NRF24L01_WriteReg(NRF24L01_00_CONFIG, (1 << NRF24L01_00_EN_CRC)   // switch to TX mode
 											| (1 << NRF24L01_00_CRCO)
 											| (1 << NRF24L01_00_PWR_UP));
@@ -198,9 +210,6 @@ void NRF24L01_SetTxRxMode(enum TXRX_State mode)
 		if (mode == RX_EN)
 		{
 			NRF_CE_off;
-			NRF24L01_WriteReg(NRF24L01_07_STATUS, (1 << NRF24L01_07_RX_DR)    //reset the flag(s)
-												| (1 << NRF24L01_07_TX_DS)
-												| (1 << NRF24L01_07_MAX_RT));
 			NRF24L01_WriteReg(NRF24L01_00_CONFIG, (1 << NRF24L01_00_EN_CRC)   // switch to RX mode
 												| (1 << NRF24L01_00_CRCO)
 												| (1 << NRF24L01_00_PWR_UP)
@@ -217,13 +226,6 @@ void NRF24L01_SetTxRxMode(enum TXRX_State mode)
 
 void NRF24L01_Reset()
 {
-	//** not in deviation but needed to hot switch between models
-	NRF24L01_Activate(0x73);                          // Activate feature register
-	NRF24L01_WriteReg(NRF24L01_1C_DYNPD, 0x00);       // Disable dynamic payload length on all pipes
-	NRF24L01_WriteReg(NRF24L01_1D_FEATURE, 0x00);     // Set feature bits off
-	NRF24L01_Activate(0x73);
-	//**
-
 	NRF24L01_FlushTx();
     NRF24L01_FlushRx();
     NRF24L01_Strobe(0xff);			// NOP
@@ -244,342 +246,6 @@ uint8_t NRF24L01_packet_ack()
 	return PKT_PENDING;
 }
 
-
-///////////////
-// XN297 emulation layer
-uint8_t xn297_scramble_enabled=XN297_SCRAMBLED;	//enabled by default
-uint8_t xn297_addr_len;
-uint8_t xn297_tx_addr[5];
-uint8_t xn297_rx_addr[5];
-uint8_t xn297_crc = 0;
-
-// xn297 address / pcf / payload scramble table
-const uint8_t xn297_scramble[] = {
-    0xE3, 0xB1, 0x4B, 0xEA, 0x85, 0xBC, 0xE5, 0x66,
-    0x0D, 0xAE, 0x8C, 0x88, 0x12, 0x69, 0xEE, 0x1F,
-    0xC7, 0x62, 0x97, 0xD5, 0x0B, 0x79, 0xCA, 0xCC,
-    0x1B, 0x5D, 0x19, 0x10, 0x24, 0xD3, 0xDC, 0x3F,
-    0x8E, 0xC5, 0x2F, 0xAA, 0x16, 0xF3, 0x95 };
-
-// scrambled, standard mode crc xorout table
-const uint16_t PROGMEM xn297_crc_xorout_scrambled[] = {
-    0x0000, 0x3448, 0x9BA7, 0x8BBB, 0x85E1, 0x3E8C,
-    0x451E, 0x18E6, 0x6B24, 0xE7AB, 0x3828, 0x814B,
-    0xD461, 0xF494, 0x2503, 0x691D, 0xFE8B, 0x9BA7,
-    0x8B17, 0x2920, 0x8B5F, 0x61B1, 0xD391, 0x7401,
-    0x2138, 0x129F, 0xB3A0, 0x2988, 0x23CA, 0xC0CB,
-    0x0C6C, 0xB329, 0xA0A1, 0x0A16, 0xA9D0 };
-
-// unscrambled, standard mode crc xorout table
-const uint16_t PROGMEM xn297_crc_xorout[] = {
-    0x0000, 0x3D5F, 0xA6F1, 0x3A23, 0xAA16, 0x1CAF,
-    0x62B2, 0xE0EB, 0x0821, 0xBE07, 0x5F1A, 0xAF15,
-    0x4F0A, 0xAD24, 0x5E48, 0xED34, 0x068C, 0xF2C9,
-    0x1852, 0xDF36, 0x129D, 0xB17C, 0xD5F5, 0x70D7,
-    0xB798, 0x5133, 0x67DB, 0xD94E, 0x0A5B, 0xE445,
-    0xE6A5, 0x26E7, 0xBDAB, 0xC379, 0x8E20 };
-
-// scrambled enhanced mode crc xorout table
-const uint16_t PROGMEM xn297_crc_xorout_scrambled_enhanced[] = {
-    0x0000, 0x7EBF, 0x3ECE, 0x07A4, 0xCA52, 0x343B,
-    0x53F8, 0x8CD0, 0x9EAC, 0xD0C0, 0x150D, 0x5186,
-    0xD251, 0xA46F, 0x8435, 0xFA2E, 0x7EBD, 0x3C7D,
-    0x94E0, 0x3D5F, 0xA685, 0x4E47, 0xF045, 0xB483,
-    0x7A1F, 0xDEA2, 0x9642, 0xBF4B, 0x032F, 0x01D2,
-    0xDC86, 0x92A5, 0x183A, 0xB760, 0xA953 };
-
-// unscrambled enhanced mode crc xorout table
-// unused so far
-#ifdef XN297DUMP_NRF24L01_INO
-const uint16_t xn297_crc_xorout_enhanced[] = {
-    0x0000, 0x8BE6, 0xD8EC, 0xB87A, 0x42DC, 0xAA89,
-    0x83AF, 0x10E4, 0xE83E, 0x5C29, 0xAC76, 0x1C69,
-    0xA4B2, 0x5961, 0xB4D3, 0x2A50, 0xCB27, 0x5128,
-    0x7CDB, 0x7A14, 0xD5D2, 0x57D7, 0xE31D, 0xCE42,
-    0x648D, 0xBF2D, 0x653B, 0x190C, 0x9117, 0x9A97,
-    0xABFC, 0xE68E, 0x0DE7, 0x28A2, 0x1965 };
-#endif
-
-static uint8_t bit_reverse(uint8_t b_in)
-{
-    uint8_t b_out = 0;
-    for (uint8_t i = 0; i < 8; ++i)
-	{
-        b_out = (b_out << 1) | (b_in & 1);
-        b_in >>= 1;
-    }
-    return b_out;
-}
-
-static const uint16_t polynomial = 0x1021;
-static uint16_t crc16_update(uint16_t crc, uint8_t a, uint8_t bits)
-{
-	crc ^= a << 8;
-    while(bits--)
-        if (crc & 0x8000)
-            crc = (crc << 1) ^ polynomial;
-		else
-            crc = crc << 1;
-    return crc;
-}
-
-void XN297_SetTXAddr(const uint8_t* addr, uint8_t len)
-{
-	if (len > 5) len = 5;
-	if (len < 3) len = 3;
-	uint8_t buf[] = { 0x55, 0x0F, 0x71, 0x0C, 0x00 }; // bytes for XN297 preamble 0xC710F55 (28 bit)
-	xn297_addr_len = len;
-	if (xn297_addr_len < 4)
-		for (uint8_t i = 0; i < 4; ++i)
-			buf[i] = buf[i+1];
-	NRF24L01_WriteReg(NRF24L01_03_SETUP_AW, len-2);
-	NRF24L01_WriteRegisterMulti(NRF24L01_10_TX_ADDR, buf, 5);
-	// Receive address is complicated. We need to use scrambled actual address as a receive address
-	// but the TX code now assumes fixed 4-byte transmit address for preamble. We need to adjust it
-	// first. Also, if the scrambled address begins with 1 nRF24 will look for preamble byte 0xAA
-	// instead of 0x55 to ensure enough 0-1 transitions to tune the receiver. Still need to experiment
-	// with receiving signals.
-	memcpy(xn297_tx_addr, addr, len);
-}
-
-void XN297_SetRXAddr(const uint8_t* addr, uint8_t len)
-{
-	if (len > 5) len = 5;
-	if (len < 3) len = 3;
-	uint8_t buf[] = { 0, 0, 0, 0, 0 };
-	memcpy(buf, addr, len);
-	memcpy(xn297_rx_addr, addr, len);
-	for (uint8_t i = 0; i < xn297_addr_len; ++i)
-	{
-		buf[i] = xn297_rx_addr[i];
-		if(xn297_scramble_enabled)
-			buf[i] ^= xn297_scramble[xn297_addr_len-i-1];
-	}
-	NRF24L01_WriteReg(NRF24L01_03_SETUP_AW, len-2);
-	NRF24L01_WriteRegisterMulti(NRF24L01_0A_RX_ADDR_P0, buf, 5);
-}
-
-void XN297_Configure(uint8_t flags)
-{
-	xn297_crc = !!(flags & _BV(NRF24L01_00_EN_CRC));
-	flags &= ~(_BV(NRF24L01_00_EN_CRC) | _BV(NRF24L01_00_CRCO));
-	NRF24L01_WriteReg(NRF24L01_00_CONFIG, flags & 0xFF);
-}
-
-void XN297_SetScrambledMode(const uint8_t mode)
-{
-    xn297_scramble_enabled = mode;
-}
-
-void XN297_WritePayload(uint8_t* msg, uint8_t len)
-{
-	uint8_t buf[32];
-	uint8_t last = 0;
-
-	if (xn297_addr_len < 4)
-	{
-		// If address length (which is defined by receive address length)
-		// is less than 4 the TX address can't fit the preamble, so the last
-		// byte goes here
-		buf[last++] = 0x55;
-	}
-	for (uint8_t i = 0; i < xn297_addr_len; ++i)
-	{
-		buf[last] = xn297_tx_addr[xn297_addr_len-i-1];
-		if(xn297_scramble_enabled)
-			buf[last] ^=  xn297_scramble[i];
-		last++;
-	}
-	for (uint8_t i = 0; i < len; ++i)
-	{
-		// bit-reverse bytes in packet
-		buf[last] = bit_reverse(msg[i]);
-		if(xn297_scramble_enabled)
-			buf[last] ^= xn297_scramble[xn297_addr_len+i];
-		last++;
-	}
-	if (xn297_crc)
-	{
-		uint8_t offset = xn297_addr_len < 4 ? 1 : 0;
-		uint16_t crc = 0xb5d2;
-		for (uint8_t i = offset; i < last; ++i)
-			crc = crc16_update(crc, buf[i], 8);
-		if(xn297_scramble_enabled)
-			crc ^= pgm_read_word(&xn297_crc_xorout_scrambled[xn297_addr_len - 3 + len]);
-		else
-			crc ^= pgm_read_word(&xn297_crc_xorout[xn297_addr_len - 3 + len]);
-		buf[last++] = crc >> 8;
-		buf[last++] = crc & 0xff;
-	}
-	NRF24L01_WritePayload(buf, last);
-}
-
-void XN297_WriteEnhancedPayload(uint8_t* msg, uint8_t len, uint8_t noack)
-{
-	uint8_t packet[32];
-	uint8_t scramble_index=0;
-	uint8_t last = 0;
-	static uint8_t pid=0;
-
-	// address
-	if (xn297_addr_len < 4)
-	{
-		// If address length (which is defined by receive address length)
-		// is less than 4 the TX address can't fit the preamble, so the last
-		// byte goes here
-		packet[last++] = 0x55;
-	}
-	for (uint8_t i = 0; i < xn297_addr_len; ++i)
-	{
-		packet[last] = xn297_tx_addr[xn297_addr_len-i-1];
-		if(xn297_scramble_enabled)
-			packet[last] ^= xn297_scramble[scramble_index++];
-		last++;
-	}
-
-	// pcf
-	packet[last] = (len << 1) | (pid>>1);
-	if(xn297_scramble_enabled)
-		packet[last] ^= xn297_scramble[scramble_index++];
-	last++;
-	packet[last] = (pid << 7) | (noack << 6);
-
-	// payload
-	packet[last]|= bit_reverse(msg[0]) >> 2; // first 6 bit of payload
-	if(xn297_scramble_enabled)
-		packet[last] ^= xn297_scramble[scramble_index++];
-
-	for (uint8_t i = 0; i < len-1; ++i)
-	{
-		last++;
-		packet[last] = (bit_reverse(msg[i]) << 6) | (bit_reverse(msg[i+1]) >> 2);
-		if(xn297_scramble_enabled)
-			packet[last] ^= xn297_scramble[scramble_index++];
-	}
-
-	last++;
-	packet[last] = bit_reverse(msg[len-1]) << 6; // last 2 bit of payload
-	if(xn297_scramble_enabled)
-		packet[last] ^= xn297_scramble[scramble_index++] & 0xc0;
-
-	// crc
-	if (xn297_crc)
-	{
-		uint8_t offset = xn297_addr_len < 4 ? 1 : 0;
-		uint16_t crc = 0xb5d2;
-		for (uint8_t i = offset; i < last; ++i)
-			crc = crc16_update(crc, packet[i], 8);
-		crc = crc16_update(crc, packet[last] & 0xc0, 2);
-		if (xn297_scramble_enabled)
-			crc ^= pgm_read_word(&xn297_crc_xorout_scrambled_enhanced[xn297_addr_len-3+len]);
-		//else
-		//	crc ^= pgm_read_word(&xn297_crc_xorout_enhanced[xn297_addr_len - 3 + len]);
-
-		packet[last++] |= (crc >> 8) >> 2;
-		packet[last++] = ((crc >> 8) << 6) | ((crc & 0xff) >> 2);
-		packet[last++] = (crc & 0xff) << 6;
-	}
-	NRF24L01_WritePayload(packet, last);
-
-	pid++;
-	if(pid>3)
-		pid=0;
-}
-
-boolean XN297_ReadPayload(uint8_t* msg, uint8_t len)
-{ //!!! Don't forget if using CRC to do a +2 on any of the used NRF24L01_11_RX_PW_Px !!!
-	uint8_t buf[32];
-	if (xn297_crc)
-		NRF24L01_ReadPayload(buf, len+2);	// Read payload + CRC 
-	else
-		NRF24L01_ReadPayload(buf, len);
-	// Decode payload
-	for(uint8_t i=0; i<len; i++)
-	{
-		uint8_t b_in=buf[i];
-		if(xn297_scramble_enabled)
-			b_in ^= xn297_scramble[i+xn297_addr_len];
-		msg[i] = bit_reverse(b_in);
-	}
-	if (!xn297_crc)
-		return true;	// No CRC so OK by default...
-
-	// Calculate CRC
-	uint16_t crc = 0xb5d2;
-	//process address
-	for (uint8_t i = 0; i < xn297_addr_len; ++i)
-	{
-		uint8_t b_in=xn297_rx_addr[xn297_addr_len-i-1];
-		if(xn297_scramble_enabled)
-			b_in ^=  xn297_scramble[i];
-		crc = crc16_update(crc, b_in, 8);
-	}
-	//process payload
-	for (uint8_t i = 0; i < len; ++i)
-		crc = crc16_update(crc, buf[i], 8);
-	//xorout
-	if(xn297_scramble_enabled)
-		crc ^= pgm_read_word(&xn297_crc_xorout_scrambled[xn297_addr_len - 3 + len]);
-	else
-		crc ^= pgm_read_word(&xn297_crc_xorout[xn297_addr_len - 3 + len]);
-	//test
-	if( (crc >> 8) == buf[len] && (crc & 0xff) == buf[len+1])
-		return true;	// CRC  OK
-	return false;		// CRC NOK
-}
-
-uint8_t XN297_ReadEnhancedPayload(uint8_t* msg, uint8_t len)
-{ //!!! Don't forget do a +2 and if using CRC add +2 on any of the used NRF24L01_11_RX_PW_Px !!!
-	uint8_t buffer[32];
-	uint8_t pcf_size; // pcf payload size
-	if (xn297_crc)
-		NRF24L01_ReadPayload(buffer, len+4);	// Read pcf + payload + CRC 
-	else
-		NRF24L01_ReadPayload(buffer, len+2);	// Read pcf + payload
-	pcf_size = buffer[0];
-	if(xn297_scramble_enabled)
-		pcf_size ^= xn297_scramble[xn297_addr_len];
-	pcf_size = pcf_size >> 1;
-	for(int i=0; i<len; i++)
-	{
-		msg[i] = bit_reverse((buffer[i+1] << 2) | (buffer[i+2] >> 6));
-		if(xn297_scramble_enabled)
-			msg[i] ^= bit_reverse((xn297_scramble[xn297_addr_len+i+1] << 2) | 
-									(xn297_scramble[xn297_addr_len+i+2] >> 6));
-	}
-
-	if (!xn297_crc)
-		return pcf_size;	// No CRC so OK by default...
-
-	// Calculate CRC
-	uint16_t crc = 0xb5d2;
-	//process address
-	for (uint8_t i = 0; i < xn297_addr_len; ++i)
-	{
-		uint8_t b_in=xn297_rx_addr[xn297_addr_len-i-1];
-		if(xn297_scramble_enabled)
-			b_in ^=  xn297_scramble[i];
-		crc = crc16_update(crc, b_in, 8);
-	}
-	//process payload
-	for (uint8_t i = 0; i < len+1; ++i)
-		crc = crc16_update(crc, buffer[i], 8);
-	crc = crc16_update(crc, buffer[len+1] & 0xc0, 2);
-	//xorout
-	if (xn297_scramble_enabled)
-		crc ^= pgm_read_word(&xn297_crc_xorout_scrambled_enhanced[xn297_addr_len-3+len]);
-#ifdef XN297DUMP_NRF24L01_INO
-	else
-		crc ^= pgm_read_word(&xn297_crc_xorout_enhanced[xn297_addr_len - 3 + len]);
-#endif
-	uint16_t crcxored=(buffer[len+1]<<10)|(buffer[len+2]<<2)|(buffer[len+3]>>6) ;
-	if( crc == crcxored)
-		return pcf_size;	// CRC  OK
-	return 0;				// CRC NOK
-}
- 
- // End of XN297 emulation
-
 //
 // HS6200 emulation layer
 ///////////////////////////
@@ -606,9 +272,10 @@ void HS6200_SetTXAddr(const uint8_t* addr, uint8_t len)
 		NRF24L01_WriteRegisterMulti(NRF24L01_10_TX_ADDR, (uint8_t*)"\xaa\xaa\xaa\xaa\xaa", 5);
 
 	// precompute address crc
-	hs6200_crc_init = 0xffff;
+	crc = 0xffff;
 	for(int i=0; i<len; i++)
-		hs6200_crc_init = crc16_update(hs6200_crc_init, addr[len-1-i], 8);
+		crc16_update(addr[len-1-i], 8);
+	hs6200_crc_init=crc;
 	memcpy(hs6200_tx_addr, addr, len);
 	hs6200_address_length = len;
 }
@@ -616,14 +283,14 @@ void HS6200_SetTXAddr(const uint8_t* addr, uint8_t len)
 static uint16_t hs6200_calc_crc(uint8_t* msg, uint8_t len)
 {
     uint8_t pos;
-    uint16_t crc = hs6200_crc_init;
     
+	crc = hs6200_crc_init;
     // pcf + payload
     for(pos=0; pos < len-1; pos++)
-        crc = crc16_update(crc, msg[pos], 8);
+        crc16_update(msg[pos], 8);
     // last byte (1 bit only)
     if(len > 0)
-        crc = crc16_update(crc, msg[pos+1], 1);
+        crc16_update(msg[pos+1], 1);
     return crc;
 }
 
@@ -797,7 +464,8 @@ void LT8900_SetAddress(uint8_t *address,uint8_t addr_size)
 uint8_t LT8900_ReadPayload(uint8_t* msg, uint8_t len)
 {
 	uint8_t i,pos=0,shift,end,buffer[32];
-	unsigned int crc=LT8900_CRC_Initial_Data,a;
+	unsigned int a;
+	crc=LT8900_CRC_Initial_Data;
 	pos=LT8900_buffer_overhead_bits/8-LT8900_buffer_start;
 	end=pos+len+(LT8900_Flags&_BV(LT8900_PACKET_LENGTH_EN)?1:0)+(LT8900_Flags&_BV(LT8900_CRC_ON)?2:0);
 	//Read payload
@@ -817,14 +485,14 @@ uint8_t LT8900_ReadPayload(uint8_t* msg, uint8_t len)
 	//Check len
 	if(LT8900_Flags&_BV(LT8900_PACKET_LENGTH_EN))
 	{
-		crc=crc16_update(crc,buffer[pos],8);
+		crc16_update(buffer[pos],8);
 		if(bit_reverse(len)!=buffer[pos++])
 			return 0; // wrong len...
 	}
 	//Decode message 
 	for(i=0;i<len;i++)
 	{
-		crc=crc16_update(crc,buffer[pos],8);
+		crc16_update(buffer[pos],8);
 		msg[i]=bit_reverse(buffer[pos++]);
 	}
 	//Check CRC
@@ -839,21 +507,22 @@ uint8_t LT8900_ReadPayload(uint8_t* msg, uint8_t len)
 
 void LT8900_WritePayload(uint8_t* msg, uint8_t len)
 {
-	unsigned int crc=LT8900_CRC_Initial_Data,a,mask;
+	unsigned int a,mask;
 	uint8_t i, pos=0,tmp, buffer[64], pos_final,shift;
+	crc=LT8900_CRC_Initial_Data;
 	//Add packet len
 	if(LT8900_Flags&_BV(LT8900_PACKET_LENGTH_EN))
 	{
 		tmp=bit_reverse(len);
 		buffer[pos++]=tmp;
-		crc=crc16_update(crc,tmp,8);
+		crc16_update(tmp,8);
 	}
 	//Add payload
 	for(i=0;i<len;i++)
 	{
 		tmp=bit_reverse(msg[i]);
 		buffer[pos++]=tmp;
-		crc=crc16_update(crc,tmp,8);
+		crc16_update(tmp,8);
 	}
 	//Add CRC
 	if(LT8900_Flags&_BV(LT8900_CRC_ON))

Multiprotocol/NRF250K_EMU.ino

@@ -12,369 +12,28 @@
  You should have received a copy of the GNU General Public License
  along with Multiprotocol.  If not, see <http://www.gnu.org/licenses/>.
  */
-#ifdef NRF24L01_INSTALLED
+#if defined(CC2500_INSTALLED) || defined(NRF24L01_INSTALLED)
+
 #include "iface_nrf250k.h"
 
-static void __attribute__((unused)) XN297L_Init()
-{
-	#ifdef CC2500_INSTALLED
-	if(option==0)
-	#endif
-	{//NRF
-		debugln("Using NRF");
-		PE1_on;							//NRF24L01 antenna RF3 by default
-		PE2_off;						//NRF24L01 antenna RF3 by default
-		NRF24L01_Initialize();
-		NRF24L01_SetTxRxMode(TX_EN);
-		NRF24L01_FlushTx();
-		NRF24L01_FlushRx();
-		NRF24L01_WriteReg(NRF24L01_07_STATUS, 0x70);	// Clear data ready, data sent, and retransmit
-		NRF24L01_WriteReg(NRF24L01_01_EN_AA, 0x00);		// No Auto Acknowldgement on all data pipes
-		NRF24L01_WriteReg(NRF24L01_02_EN_RXADDR, 0x01);	// Enable data pipe 0 only
-		NRF24L01_SetBitrate(NRF24L01_BR_250K);			// 250Kbps
-		NRF24L01_SetPower();
-		return;
-	}
-	//CC2500
-	#ifdef CC2500_INSTALLED
-		debugln("Using CC2500");
-		PE1_off; // antenna RF2
-		PE2_on;
-		CC2500_Reset();
-		CC2500_Strobe(CC2500_SIDLE);
-
-		// Address Config = No address check
-		// Base Frequency = 2400
-		// CRC Autoflush = false
-		// CRC Enable = false
-		// Channel Spacing = 333.251953
-		// Data Format = Normal mode
-		// Data Rate = 249.939
-		// Deviation = 126.953125
-		// Device Address = 0
-		// Manchester Enable = false
-		// Modulated = true
-		// Modulation Format = GFSK
-		// Packet Length Mode = Variable packet length mode. Packet length configured by the first byte after sync word
-		// RX Filter BW = 203.125000
-		// Sync Word Qualifier Mode = No preamble/sync
-		// TX Power = 0
-		// Whitening = false
-		// Fast Frequency Hopping - no PLL auto calibration
-
-		CC2500_WriteReg(CC2500_08_PKTCTRL0,	0x01);   // Packet Automation Control
-		CC2500_WriteReg(CC2500_0B_FSCTRL1,	0x0A);   // Frequency Synthesizer Control
-		CC2500_WriteReg(CC2500_0C_FSCTRL0, option);  // Frequency offset hack 
-		CC2500_WriteReg(CC2500_0D_FREQ2,	0x5C);   // Frequency Control Word, High Byte
-		CC2500_WriteReg(CC2500_0E_FREQ1,	0x4E);   // Frequency Control Word, Middle Byte
-		CC2500_WriteReg(CC2500_0F_FREQ0,	0xC3);   // Frequency Control Word, Low Byte
-		CC2500_WriteReg(CC2500_10_MDMCFG4,	0x8D);   // Modem Configuration
-		CC2500_WriteReg(CC2500_11_MDMCFG3,	0x3B);   // Modem Configuration
-		CC2500_WriteReg(CC2500_12_MDMCFG2,	0x10);   // Modem Configuration
-		CC2500_WriteReg(CC2500_13_MDMCFG1,	0x23);   // Modem Configuration
-		CC2500_WriteReg(CC2500_14_MDMCFG0,	0xA4);   // Modem Configuration
-		CC2500_WriteReg(CC2500_15_DEVIATN,	0x62);   // Modem Deviation Setting
-		CC2500_WriteReg(CC2500_18_MCSM0,	0x08);   // Main Radio Control State Machine Configuration
-		CC2500_WriteReg(CC2500_19_FOCCFG,	0x1D);   // Frequency Offset Compensation Configuration
-		CC2500_WriteReg(CC2500_1A_BSCFG,	0x1C);   // Bit Synchronization Configuration
-		CC2500_WriteReg(CC2500_1B_AGCCTRL2, 0xC7);   // AGC Control
-		CC2500_WriteReg(CC2500_1C_AGCCTRL1, 0x00);   // AGC Control
-		CC2500_WriteReg(CC2500_1D_AGCCTRL0, 0xB0);   // AGC Control
-		CC2500_WriteReg(CC2500_21_FREND1,	0xB6);   // Front End RX Configuration
-		CC2500_WriteReg(CC2500_23_FSCAL3,	0xEA);   // Frequency Synthesizer Calibration
-		CC2500_WriteReg(CC2500_25_FSCAL1,	0x00);   // Frequency Synthesizer Calibration
-		CC2500_WriteReg(CC2500_26_FSCAL0,	0x11);   // Frequency Synthesizer Calibration
-
-		CC2500_SetTxRxMode(TX_EN);
-		CC2500_SetPower();
-		xn297_scramble_enabled=XN297_SCRAMBLED;	//enabled by default
-	#endif
-}
-
-static void __attribute__((unused)) XN297L_SetTXAddr(const uint8_t* addr, uint8_t len)
-{
-	#ifdef CC2500_INSTALLED
-	if(option==0)
-	#endif
-	{//NRF
-		XN297_SetTXAddr(addr,len);
-		return;
-	}
-	//CC2500
-	#ifdef CC2500_INSTALLED
-		if (len > 5) len = 5;
-		if (len < 3) len = 3;
-		xn297_addr_len = len;
-		memcpy(xn297_tx_addr, addr, len);
-	#endif
-}
-
-static void __attribute__((unused)) XN297L_WritePayload(uint8_t* msg, uint8_t len)
-{
-	#ifdef CC2500_INSTALLED
-	if(option==0)
-	#endif
-	{//NRF
-		XN297_Configure(_BV(NRF24L01_00_EN_CRC) | _BV(NRF24L01_00_CRCO) | _BV(NRF24L01_00_PWR_UP));
-		NRF24L01_WriteReg(NRF24L01_07_STATUS, 0x70);
-		NRF24L01_FlushTx();
-		XN297_WritePayload(msg, len);
-		return;
-	}
-	//CC2500
-	#ifdef CC2500_INSTALLED
-		uint8_t buf[32];
-		uint8_t last = 0;
-		uint8_t i;
-		static const uint16_t initial = 0xb5d2;
-
-		// address
-		for (i = 0; i < xn297_addr_len; ++i)
-		{
-			buf[last] = xn297_tx_addr[xn297_addr_len - i - 1];
-			if(xn297_scramble_enabled)
-				buf[last] ^=  xn297_scramble[i];
-			last++;
-		}
-
-		// payload
-		for (i = 0; i < len; ++i) {
-			// bit-reverse bytes in packet
-			buf[last] = bit_reverse(msg[i]);
-			if(xn297_scramble_enabled)
-				buf[last] ^= xn297_scramble[xn297_addr_len+i];
-			last++;
-		}
-
-		// crc
-		uint16_t crc = initial;
-		for (uint8_t i = 0; i < last; ++i)
-			crc = crc16_update(crc, buf[i], 8);
-		if(xn297_scramble_enabled)
-			crc ^= pgm_read_word(&xn297_crc_xorout_scrambled[xn297_addr_len - 3 + len]);
-		else
-			crc ^= pgm_read_word(&xn297_crc_xorout[xn297_addr_len - 3 + len]);
-		buf[last++] = crc >> 8;
-		buf[last++] = crc & 0xff;
-
-		// stop TX/RX
-		CC2500_Strobe(CC2500_SIDLE);
-		// flush tx FIFO
-		CC2500_Strobe(CC2500_SFTX);
-		// packet length
-		CC2500_WriteReg(CC2500_3F_TXFIFO, last + 3);
-		// xn297L preamble
-		CC2500_WriteRegisterMulti(CC2500_3F_TXFIFO, (uint8_t*)"\x71\x0f\x55", 3);
-		// xn297 packet
-		CC2500_WriteRegisterMulti(CC2500_3F_TXFIFO, buf, last);
-		// transmit
-		CC2500_Strobe(CC2500_STX);
-	#endif
-}
-
-static void __attribute__((unused)) XN297L_WriteEnhancedPayload(uint8_t* msg, uint8_t len, uint8_t noack)
-{
-	#ifdef CC2500_INSTALLED
-	if(option==0)
-	#endif
-	{//NRF
-		XN297_Configure(_BV(NRF24L01_00_EN_CRC) | _BV(NRF24L01_00_CRCO) | _BV(NRF24L01_00_PWR_UP));
-		NRF24L01_WriteReg(NRF24L01_07_STATUS, 0x70);
-		NRF24L01_FlushTx();
-		XN297_WriteEnhancedPayload(msg, len, noack);
-		return;
-	}
-	//CC2500
-	#ifdef CC2500_INSTALLED
-		uint8_t buf[32];
-		uint8_t scramble_index=0;
-		uint8_t last = 0;
-		static uint8_t pid=0;
-
-		// address
-		for (uint8_t i = 0; i < xn297_addr_len; ++i)
-		{
-			buf[last] = xn297_tx_addr[xn297_addr_len-i-1];
-			if(xn297_scramble_enabled)
-				buf[last] ^= xn297_scramble[scramble_index++];
-			last++;
-		}
-
-		// pcf
-		buf[last] = (len << 1) | (pid>>1);
-		if(xn297_scramble_enabled)
-			buf[last] ^= xn297_scramble[scramble_index++];
-		last++;
-		buf[last] = (pid << 7) | (noack << 6);
-
-		// payload
-		buf[last]|= bit_reverse(msg[0]) >> 2; // first 6 bit of payload
-		if(xn297_scramble_enabled)
-			buf[last] ^= xn297_scramble[scramble_index++];
-
-		for (uint8_t i = 0; i < len-1; ++i)
-		{
-			last++;
-			buf[last] = (bit_reverse(msg[i]) << 6) | (bit_reverse(msg[i+1]) >> 2);
-			if(xn297_scramble_enabled)
-				buf[last] ^= xn297_scramble[scramble_index++];
-		}
-
-		last++;
-		buf[last] = bit_reverse(msg[len-1]) << 6; // last 2 bit of payload
-		if(xn297_scramble_enabled)
-			buf[last] ^= xn297_scramble[scramble_index++] & 0xc0;
-
-		// crc
-		//if (xn297_crc)
-		{
-			uint16_t crc = 0xb5d2;
-			for (uint8_t i = 0; i < last; ++i)
-				crc = crc16_update(crc, buf[i], 8);
-			crc = crc16_update(crc, buf[last] & 0xc0, 2);
-			if (xn297_scramble_enabled)
-				crc ^= pgm_read_word(&xn297_crc_xorout_scrambled_enhanced[xn297_addr_len-3+len]);
-			//else
-			//	crc ^= pgm_read_word(&xn297_crc_xorout_enhanced[xn297_addr_len - 3 + len]);
-
-			buf[last++] |= (crc >> 8) >> 2;
-			buf[last++] = ((crc >> 8) << 6) | ((crc & 0xff) >> 2);
-			buf[last++] = (crc & 0xff) << 6;
-		}
-
-		pid++;
-		pid &= 3;
-
-		// stop TX/RX
-		CC2500_Strobe(CC2500_SIDLE);
-		// flush tx FIFO
-		CC2500_Strobe(CC2500_SFTX);
-		// packet length
-		CC2500_WriteReg(CC2500_3F_TXFIFO, last + 3);
-		// xn297L preamble
-		CC2500_WriteRegisterMulti(CC2500_3F_TXFIFO, (uint8_t*)"\x71\x0F\x55", 3);
-		// xn297 packet
-		CC2500_WriteRegisterMulti(CC2500_3F_TXFIFO, buf, last);
-		// transmit
-		CC2500_Strobe(CC2500_STX);
-	#endif
-}
-
-static void __attribute__((unused)) XN297L_HoppingCalib(uint8_t num_freq)
-{	//calibrate hopping frequencies
-	#ifdef CC2500_INSTALLED
-	if(option==0)
-	#endif
-		return;		//NRF
-	#ifdef CC2500_INSTALLED
-		for (uint8_t i = 0; i < num_freq; i++)
-		{
-			CC2500_Strobe(CC2500_SIDLE);
-			CC2500_WriteReg(CC2500_0A_CHANNR, hopping_frequency[i]*3);
-			CC2500_Strobe(CC2500_SCAL);
-			delayMicroseconds(900);
-			calData[i]=CC2500_ReadReg(CC2500_25_FSCAL1);
-		}
-	#endif
-}
-
-static void __attribute__((unused)) XN297L_Hopping(uint8_t index)
-{
-	#ifdef CC2500_INSTALLED
-	if(option==0)
-	#endif
-	{//NRF
-		NRF24L01_WriteReg(NRF24L01_05_RF_CH, hopping_frequency[index]);
-		return;
-	}
-	#ifdef CC2500_INSTALLED
-		// spacing is 333.25 kHz, must multiply xn297 channel by 3
-		CC2500_WriteReg(CC2500_0A_CHANNR, hopping_frequency[index] * 3);
-		// set PLL calibration
-		CC2500_WriteReg(CC2500_25_FSCAL1, calData[index]);
-	#endif
-}
-
-static void __attribute__((unused)) XN297L_RFChannel(uint8_t number)
-{	//change channel
-	#ifdef CC2500_INSTALLED
-	if(option==0)
-	#endif
-	{//NRF
-		NRF24L01_WriteReg(NRF24L01_05_RF_CH, number);
-		return;
-	}
-	#ifdef CC2500_INSTALLED
-		CC2500_Strobe(CC2500_SIDLE);
-		CC2500_WriteReg(CC2500_0A_CHANNR, number*3);
-		CC2500_Strobe(CC2500_SCAL);
-		delayMicroseconds(900);
-	#endif
-}
-
-static void __attribute__((unused)) XN297L_SetPower()
-{
-	#ifdef CC2500_INSTALLED
-	if(option==0)
-	#endif
-	{//NRF
-		NRF24L01_SetPower();
-		return;
-	}
-	#ifdef CC2500_INSTALLED
-		CC2500_SetPower();
-	#endif
-}
-
-static void __attribute__((unused)) XN297L_SetFreqOffset()
-{	// Frequency offset
-	#ifdef CC2500_INSTALLED
-	if(option==0 && prev_option==0)
-	#endif
-		return;		//NRF
-	#ifdef CC2500_INSTALLED
-		if (prev_option != option)
-		{
-			if(prev_option==0 || option==0)
-				CHANGE_PROTOCOL_FLAG_on;
-			prev_option = option;
-			CC2500_WriteReg(CC2500_0C_FSCTRL0, option);
-		}
-	#endif
-}
+uint8_t cc2500_nrf_tx_addr[5], cc2500_nrf_addr_len;
 
 static void __attribute__((unused)) NRF250K_SetTXAddr(uint8_t* addr, uint8_t len)
 {
 	if (len > 5) len = 5;
 	if (len < 3) len = 3;
-	#ifdef CC2500_INSTALLED
-	if(option==0)
-	#endif
-	{//NRF
+	#if defined(CC2500_INSTALLED)
+		cc2500_nrf_addr_len = len;
+		memcpy(cc2500_nrf_tx_addr, addr, len);
+	#elif defined(NRF24L01_INSTALLED)
 		NRF24L01_WriteReg(NRF24L01_03_SETUP_AW, len-2);
 		NRF24L01_WriteRegisterMulti(NRF24L01_10_TX_ADDR, addr, len);
-		return;
-	}
-	//CC2500
-	#ifdef CC2500_INSTALLED
-		xn297_addr_len = len;
-		memcpy(xn297_tx_addr, addr, len);
 	#endif
 }
 
 static void __attribute__((unused)) NRF250K_WritePayload(uint8_t* msg, uint8_t len)
 {
-	#ifdef CC2500_INSTALLED
-	if(option==0)
-	#endif
-	{//NRF
-		NRF24L01_FlushTx();
-		NRF24L01_WriteReg(NRF24L01_07_STATUS, _BV(NRF24L01_07_TX_DS) | _BV(NRF24L01_07_RX_DR) | _BV(NRF24L01_07_MAX_RT));
-		NRF24L01_WritePayload(msg, len);
-		return;
-	}
-	//CC2500
-	#ifdef CC2500_INSTALLED
+	#if defined(CC2500_INSTALLED)
 		#if defined(ESKY150V2_CC2500_INO)
 			uint8_t buf[158];
 		#else
@@ -384,22 +43,22 @@ static void __attribute__((unused)) NRF250K_WritePayload(uint8_t* msg, uint8_t l
 		uint8_t i;
 
 		//nrf preamble
-		if(xn297_tx_addr[xn297_addr_len - 1] & 0x80)
+		if(cc2500_nrf_tx_addr[cc2500_nrf_addr_len - 1] & 0x80)
 			buf[0]=0xAA;
 		else
 			buf[0]=0x55;
 		last++;
 		// address
-		for (i = 0; i < xn297_addr_len; ++i)
-			buf[last++] = xn297_tx_addr[xn297_addr_len - i - 1];
+		for (i = 0; i < cc2500_nrf_addr_len; ++i)
+			buf[last++] = cc2500_nrf_tx_addr[cc2500_nrf_addr_len - i - 1];
 		// payload
 		for (i = 0; i < len; ++i)
 			buf[last++] = msg[i];
 
 		// crc
-		uint16_t crc = 0xffff;
+		crc = 0xffff;
 		for (uint8_t i = 1; i < last; ++i)
-			crc = crc16_update(crc, buf[i], 8);
+			crc16_update( buf[i], 8);
 		buf[last++] = crc >> 8;
 		buf[last++] = crc & 0xff;
 		buf[last++] = 0;
@@ -447,18 +106,14 @@ static void __attribute__((unused)) NRF250K_WritePayload(uint8_t* msg, uint8_t l
 			CC2500_WriteRegisterMulti(CC2500_3F_TXFIFO, buff, last);
 			CC2500_Strobe(CC2500_STX);
 		}
+	#elif defined(NRF24L01_INSTALLED)
+		if(len<=32)
+		{
+			NRF24L01_FlushTx();
+			NRF24L01_WriteReg(NRF24L01_07_STATUS, _BV(NRF24L01_07_TX_DS) | _BV(NRF24L01_07_RX_DR) | _BV(NRF24L01_07_MAX_RT));
+			NRF24L01_WritePayload(msg, len);
+		}
 	#endif
 }
 
-static boolean __attribute__((unused)) NRF250K_IsPacketSent()
-{
-	#ifdef CC2500_INSTALLED
-	if(option==0)
-	#endif
-	{	//NRF
-		return NRF24L01_ReadReg(NRF24L01_07_STATUS) & _BV(NRF24L01_07_TX_DS);
-	}
-	return true;	// don't know on the CC2500 how to detect if the packet has been transmitted...
-}
-
-#endif
+#endif

Multiprotocol/NanoRF_nrf24l01.ino

@@ -0,0 +1,65 @@
+/*
+ This project is free software: you can redistribute it and/or modify
+ it under the terms of the GNU General Public License as published by
+ the Free Software Foundation, either version 3 of the License, or
+ (at your option) any later version.
+
+ Multiprotocol is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ GNU General Public License for more details.
+
+ You should have received a copy of the GNU General Public License
+ along with Multiprotocol.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#if defined(NANORF_NRF24L01_INO)
+
+#include "iface_nrf24l01.h"
+
+#define NANORF_PACKET_PERIOD		40000
+#define NANORF_INITIAL_WAIT			500
+#define NANORF_RF_CHANNEL			40
+#define NANORF_PAYLOADSIZE			7
+
+static void __attribute__((unused)) NANORF_send_packet()
+{
+	packet[0] = convert_channel_8b(AILERON);
+	packet[1] = convert_channel_8b(ELEVATOR);
+	packet[2] = convert_channel_8b(THROTTLE);
+	packet[3] = convert_channel_8b(RUDDER);
+	packet[4] = convert_channel_8b(CH5);
+	packet[5] = convert_channel_8b(CH6);
+	packet[6] = 0;
+	for (uint8_t i=0; i < NANORF_PAYLOADSIZE-1; i++)
+		packet[6] += packet[i];
+	packet[6] += 0x55;
+
+	// clear packet status bits and TX FIFO
+	NRF24L01_WriteReg(NRF24L01_07_STATUS, 0x70);
+	NRF24L01_FlushTx();
+	NRF24L01_WritePayload(packet, NANORF_PAYLOADSIZE);
+
+}
+
+static void __attribute__((unused)) NANORF_RF_init()
+{
+	NRF24L01_Initialize();
+
+	NRF24L01_WriteRegisterMulti(NRF24L01_10_TX_ADDR , (uint8_t *)"Nano1",5);
+	NRF24L01_WriteReg(NRF24L01_05_RF_CH, NANORF_RF_CHANNEL);
+}
+
+uint16_t NANORF_callback()
+{
+	NANORF_send_packet();
+	return NANORF_PACKET_PERIOD;
+}
+
+void NANORF_init()
+{	
+	BIND_DONE;
+	NANORF_RF_init();
+}
+
+#endif

Multiprotocol/OMP_ccnrf.ino

@@ -0,0 +1,284 @@
+/*
+ This project is free software: you can redistribute it and/or modify
+ it under the terms of the GNU General Public License as published by
+ the Free Software Foundation, either version 3 of the License, or
+ (at your option) any later version.
+
+Multiprotocol is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ GNU General Public License for more details.
+
+ You should have received a copy of the GNU General Public License
+ along with Multiprotocol.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#if defined(OMP_CCNRF_INO)
+
+#include "iface_xn297.h"
+
+//#define FORCE_OMP_ORIGINAL_ID
+//#define OMP_TELEM_DEBUG
+
+#define OMP_INITIAL_WAIT	500
+#define OMP_PACKET_PERIOD	5000
+#define OMP_RF_BIND_CHANNEL	35
+#define OMP_RF_NUM_CHANNELS	8
+#define OMP_PAYLOAD_SIZE	16
+#define OMP_BIND_COUNT		600	//3sec
+
+static void __attribute__((unused)) OMP_send_packet()
+{
+	if(IS_BIND_IN_PROGRESS)
+	{
+		memcpy(packet,"BND",3);
+		memcpy(&packet[3],rx_tx_addr,5);
+		memcpy(&packet[8],hopping_frequency,8);
+	}
+	else
+	{
+		memset(packet,0x00,OMP_PAYLOAD_SIZE);
+
+#ifdef OMP_HUB_TELEMETRY
+		//RX telem request every 7*5=35ms
+		packet_sent++;
+		packet_sent %= OMP_RF_NUM_CHANNELS-1;			// Change telem RX channels every time
+		if(packet_sent==0)
+			packet[0] |= 0x40;							// |0x40 to request RX telemetry
+#endif
+		
+		//hopping frequency
+		packet[0 ] |= hopping_frequency_no;
+		XN297_Hopping(hopping_frequency_no);
+		hopping_frequency_no++;
+		hopping_frequency_no &= OMP_RF_NUM_CHANNELS-1;	// 8 RF channels
+
+		//flags
+		packet[1 ] = 0x08								//unknown
+				   | GET_FLAG(CH5_SW, 0x20);			// HOLD
+
+		packet[2 ] = 0x40;								//unknown
+		
+		if(Channel_data[CH6] > CHANNEL_MAX_COMMAND)
+			packet[2 ] |= 0x20;							// IDLE2
+		else if(Channel_data[CH6] > CHANNEL_MIN_COMMAND)
+			packet[1 ] |= 0x40;							// IDLE1
+
+		if(Channel_data[CH7] > CHANNEL_MAX_COMMAND)
+			packet[2 ] |= 0x08;							// 3D
+		else if(Channel_data[CH7] > CHANNEL_MIN_COMMAND)
+			packet[2 ] |= 0x04;							// ATTITUDE
+
+		//trims??
+		//packet[3..6]
+
+		//channels TAER packed 11bits
+		uint16_t channel=convert_channel_16b_limit(THROTTLE,0,2047);
+		packet[7 ]  = channel;
+		packet[8 ]  = channel>>8;
+		channel=convert_channel_16b_limit(AILERON,2047,0);
+		packet[8 ] |= channel<<3;
+		packet[9 ]  = channel>>5;
+		channel=convert_channel_16b_limit(ELEVATOR,0,2047);
+		packet[9] |= channel<<6;
+		packet[10]  = channel>>2;
+		packet[11]  = channel>>10;
+		channel=convert_channel_16b_limit(RUDDER,2047,0);
+		packet[11] |= channel<<1;
+		packet[12]  = channel>>7;
+
+		//unknown
+		//packet[13..15]
+		packet[15] = 0x04;
+	}
+
+	XN297_SetPower();									// Set tx_power
+	XN297_SetFreqOffset();								// Set frequency offset
+	XN297_SetTxRxMode(TX_EN);
+	XN297_WriteEnhancedPayload(packet, OMP_PAYLOAD_SIZE, packet_sent!=0);
+}
+
+static void __attribute__((unused)) OMP_RF_init()
+{
+	//Config CC2500
+	XN297_Configure(XN297_CRCEN, XN297_SCRAMBLED, XN297_250K);
+	XN297_SetTXAddr((uint8_t*)"FLPBD", 5);
+	XN297_HoppingCalib(OMP_RF_NUM_CHANNELS);	// Calibrate all channels
+	XN297_RFChannel(OMP_RF_BIND_CHANNEL);		// Set bind channel
+
+#ifdef OMP_HUB_TELEMETRY
+	XN297_SetRXAddr(rx_tx_addr, OMP_PAYLOAD_SIZE);
+#endif
+}
+
+static void __attribute__((unused)) OMP_initialize_txid()
+{
+	calc_fh_channels(OMP_RF_NUM_CHANNELS);
+	#ifdef FORCE_OMP_ORIGINAL_ID
+		rx_tx_addr[0]=0x4E;
+		rx_tx_addr[1]=0x72;
+		rx_tx_addr[2]=0x8E;
+		rx_tx_addr[3]=0x70;
+		rx_tx_addr[4]=0x62;
+		for(uint8_t i=0; i<OMP_RF_NUM_CHANNELS;i++)
+			hopping_frequency[i]=(i+3)*5;
+	#endif
+}
+
+#ifdef OMP_HUB_TELEMETRY
+	static void __attribute__((unused)) OMP_Send_Telemetry(uint8_t v)
+	{
+		v_lipo1=v;
+		telemetry_counter++;	//LQI
+		telemetry_link=1;
+		if(telemetry_lost)
+		{
+			telemetry_lost = 0;
+			packet_count = 100;
+			telemetry_counter = 100;
+		}
+	}
+#endif
+
+enum {
+	OMP_BIND		= 0x00,
+	OMP_PREPDATA	= 0x01,
+	OMP_DATA		= 0x02,
+	OMP_RX			= 0x03,
+};
+
+#define OMP_WRITE_TIME 850
+
+uint16_t OMP_callback()
+{
+	bool rx;
+	
+	switch(phase)
+	{
+		case OMP_BIND:
+			if(--bind_counter==0)
+				phase++;						// OMP_PREPDATA
+			OMP_send_packet();
+			return OMP_PACKET_PERIOD;
+		case OMP_PREPDATA:
+			BIND_DONE;
+			XN297_SetTXAddr(rx_tx_addr, 5);
+			phase++;							// OMP_DATA
+		case OMP_DATA:
+			#ifdef MULTI_SYNC
+				telemetry_set_input_sync(OMP_PACKET_PERIOD);
+			#endif
+			#ifdef OMP_HUB_TELEMETRY
+				rx = XN297_IsRX();				// Needed for the NRF24L01 since otherwise the bit gets cleared
+			#endif
+			OMP_send_packet();
+			#ifdef OMP_HUB_TELEMETRY
+				if(packet_sent == 0)
+				{
+					phase++;					// OMP_RX
+					return OMP_WRITE_TIME;
+				}
+				else if(packet_sent == 1)
+				{
+					if( rx )
+					{ // a packet has been received
+						#ifdef OMP_TELEM_DEBUG
+							debug("RX :");
+						#endif
+						if(XN297_ReadEnhancedPayload(packet_in, OMP_PAYLOAD_SIZE) == OMP_PAYLOAD_SIZE)
+						{ // packet with good CRC and length
+							#ifdef OMP_TELEM_DEBUG
+								debug("OK :");
+								for(uint8_t i=0;i<OMP_PAYLOAD_SIZE;i++)
+									debug(" %02X",packet_in[i]);
+							#endif
+							// packet_in = 01 00 98 2C 03 19 19 F0 49 02 00 00 00 00 00 00
+							// all bytes are fixed and unknown except 2 and 3 which represent the battery voltage: packet_in[3]*256+packet_in[2]=lipo voltage*100 in V
+							uint16_t v=((packet_in[3]<<8)+packet_in[2]-400)/50;
+							if(v>255) v=255;
+							v_lipo2=v;
+							OMP_Send_Telemetry(v);
+						}
+						else
+						{ // As soon as the motor spins the telem packets are becoming really bad and the CRC throws most of them in error as it should but...
+							#ifdef OMP_TELEM_DEBUG
+								debug("NOK:");
+								for(uint8_t i=0;i<OMP_PAYLOAD_SIZE;i++)
+										debug(" %02X",packet_in[i]);
+							#endif
+							if(packet_in[0]==0x01 && packet_in[1]==0x00)
+							{// the start of the packet looks ok...
+								uint16_t v=((packet_in[3]<<8)+packet_in[2]-400)/50;
+								if(v<260 && v>180)
+								{ //voltage is less than 13V and more than 9V (3V/element)
+									if(v>255) v=255;
+									uint16_t v1=v-v_lipo2;
+									if(v1&0x8000) v1=-v1;
+									if(v1<20) // the batt voltage is within 1V from a good reading...
+									{
+										OMP_Send_Telemetry(v);	// ok to send
+										#ifdef OMP_TELEM_DEBUG
+											debug(" OK");
+										#endif
+									}
+								}
+							}
+							else
+								telemetry_counter++;	//LQI
+						}
+						#ifdef OMP_TELEM_DEBUG
+							debugln("");
+						#endif
+					}
+					XN297_SetTxRxMode(TXRX_OFF);
+					packet_count++;
+					if(packet_count>=100)
+					{//LQI calculation
+						packet_count=0;
+						TX_LQI=telemetry_counter;
+						RX_RSSI=telemetry_counter;
+						if(telemetry_counter==0)
+							telemetry_lost = 1;
+						telemetry_counter = 0;
+					}
+				}
+			#endif
+			return OMP_PACKET_PERIOD;
+	#ifdef OMP_HUB_TELEMETRY
+		case OMP_RX:
+			{
+				uint16_t start=(uint16_t)micros();
+				while ((uint16_t)((uint16_t)micros()-(uint16_t)start) < 500)
+				{
+					if(XN297_IsPacketSent())
+						break;
+				}
+			}
+			XN297_SetTxRxMode(RX_EN);
+			phase = OMP_DATA;
+			return OMP_PACKET_PERIOD-OMP_WRITE_TIME;
+	#endif
+	}
+	return OMP_PACKET_PERIOD;
+}
+
+void OMP_init()
+{
+	OMP_initialize_txid();
+	OMP_RF_init();
+	hopping_frequency_no = 0;
+	packet_sent = 0;
+	#ifdef OMP_HUB_TELEMETRY
+		packet_count = 0;
+		telemetry_lost = 1;
+	#endif
+	if(IS_BIND_IN_PROGRESS)
+	{
+		bind_counter = OMP_BIND_COUNT;
+		phase = OMP_BIND;
+	}
+	else
+		phase = OMP_PREPDATA;
+}
+
+#endif

Multiprotocol/POTENSIC_nrf24l01.ino

@@ -13,7 +13,7 @@ Multiprotocol is distributed in the hope that it will be useful,
 
 #if defined(POTENSIC_NRF24L01_INO)
 
-#include "iface_nrf24l01.h"
+#include "iface_xn297.h"
 
 //#define FORCE_POTENSIC_ORIGINAL_ID
 
@@ -61,36 +61,25 @@ static void __attribute__((unused)) POTENSIC_send_packet()
 	}
 	POTENSIC_set_checksum();
 	packet[9] = hopping_frequency_no;
-	NRF24L01_WriteReg(NRF24L01_05_RF_CH, hopping_frequency[hopping_frequency_no&0x03]);
+	
+	//RF channel
+	XN297_Hopping(hopping_frequency_no&0x03);
 	hopping_frequency_no++;
-	// Power on, TX mode, 2byte CRC
-	XN297_Configure(_BV(NRF24L01_00_EN_CRC) | _BV(NRF24L01_00_CRCO) | _BV(NRF24L01_00_PWR_UP));
-	NRF24L01_WriteReg(NRF24L01_07_STATUS, 0x70);
-	NRF24L01_FlushTx();
+
+	// Send
+	XN297_SetPower();
+	XN297_SetTxRxMode(TX_EN);
 	XN297_WritePayload(packet, POTENSIC_PACKET_SIZE);
-	NRF24L01_SetPower();
 }
 
-static void __attribute__((unused)) POTENSIC_init()
+static void __attribute__((unused)) POTENSIC_RF_init()
 {
-	NRF24L01_Initialize();
-	NRF24L01_SetTxRxMode(TX_EN);
-	NRF24L01_FlushTx();
-	NRF24L01_FlushRx();
+	XN297_Configure(XN297_CRCEN, XN297_SCRAMBLED, XN297_1M);
+
 	if(IS_BIND_IN_PROGRESS)
 		XN297_SetTXAddr((uint8_t*)"\x01\x01\x01\x01\x06", 5);	// Bind address
 	else
 		XN297_SetTXAddr(rx_tx_addr,5);							// Normal address
-	NRF24L01_WriteReg(NRF24L01_01_EN_AA, 0x00);			// No Auto Acknowldgement on all data pipes
-	NRF24L01_WriteReg(NRF24L01_02_EN_RXADDR, 0x01);		// Enable data pipe 0 only
-	NRF24L01_WriteReg(NRF24L01_03_SETUP_AW, 0x03);		// set address length (5 bytes)
-	NRF24L01_WriteReg(NRF24L01_04_SETUP_RETR, 0x00);	// no retransmits
-	NRF24L01_SetBitrate(NRF24L01_BR_1M);				// 1Mbps
-	NRF24L01_SetPower();
-	NRF24L01_Activate(0x73);							// Activate feature register
-	NRF24L01_WriteReg(NRF24L01_1C_DYNPD, 0x00);			// Disable dynamic payload length on all pipes
-	NRF24L01_WriteReg(NRF24L01_1D_FEATURE, 0x01);
-	NRF24L01_Activate(0x73);
 }
 
 static void __attribute__((unused)) POTENSIC_initialize_txid()
@@ -103,26 +92,25 @@ static void __attribute__((unused)) POTENSIC_initialize_txid()
 
 uint16_t POTENSIC_callback()
 {
-	if(IS_BIND_IN_PROGRESS)
+	#ifdef MULTI_SYNC
+		telemetry_set_input_sync(POTENSIC_PACKET_PERIOD);
+	#endif
+	if(bind_counter)
 		if(--bind_counter==0)
 		{
 			BIND_DONE;
 			XN297_SetTXAddr(rx_tx_addr,5);
 		}
-	#ifdef MULTI_SYNC
-		telemetry_set_input_sync(POTENSIC_PACKET_PERIOD);
-	#endif
 	POTENSIC_send_packet();
 	return POTENSIC_PACKET_PERIOD;
 }
 
-uint16_t initPOTENSIC(void)
+void POTENSIC_init(void)
 {
 	bind_counter = POTENSIC_BIND_COUNT;
 	POTENSIC_initialize_txid();
-	POTENSIC_init();
+	POTENSIC_RF_init();
 	hopping_frequency_no = 0;
-	return	POTENSIC_INITIAL_WAIT;
 }
 
 #endif

Multiprotocol/Pelikan_a7105.ino

@@ -20,97 +20,143 @@
 
 //#define PELIKAN_FORCE_ID
 //#define PELIKAN_LITE_FORCE_ID
-#define PELIKAN_LITE_FORCE_HOP
+#define PELIKAN_LITE_FORCE_HOP				// hop sequence creation is unknown
+//#define PELIKAN_SCX24_FORCE_ID
+#define PELIKAN_SCX24_FORCE_HOP				// hop sequence creation is unknown
 
-#define PELIKAN_BIND_COUNT		400
+#define PELIKAN_BIND_COUNT		400			// 3sec
 #define PELIKAN_BIND_RF			0x3C
 #define PELIKAN_NUM_RF_CHAN 	0x1D
 #define PELIKAN_PACKET_PERIOD	7980
 #define PELIKAN_LITE_PACKET_PERIOD 18000
+#define PELIKAN_SCX24_PACKET_PERIOD 15069
 
 static void __attribute__((unused)) pelikan_build_packet()
 {
 	static boolean upper=false;
-	packet[0] = 0x15;
+	uint8_t sum;
+	uint16_t channel;
+
+	if(sub_protocol == PELIKAN_SCX24)
+		packet[0] = 0x11;
+	else //PELIKAN_PRO & PELIKAN_LITE
+		packet[0] = 0x15;
     if(IS_BIND_IN_PROGRESS)
 	{
-		packet[1] = 0x04;			//version??
 		packet[2] = rx_tx_addr[0];
 		packet[3] = rx_tx_addr[1];
 		packet[4] = rx_tx_addr[2];
 		packet[5] = rx_tx_addr[3];
-		if(sub_protocol==PELIKAN_PRO)
-			packet[6] = 0x05;		//sub version??
-		else //PELIKAN_LITE
-			packet[6] = 0x03;		//sub version??
-		packet[7] = 0x00;			//??
-		packet[8] = 0x55;			//??
+
+		if(sub_protocol == PELIKAN_SCX24)
+		{
+			packet[1] = 0x65;				//??
+			packet[6] = 0x55;				//??
+			packet[7] = 0xAA;				//??
+		}
+		else
+		{//PELIKAN_PRO & PELIKAN_LITE
+			packet[1] = 0x04;				//version??
+			if(sub_protocol==PELIKAN_PRO)
+				packet[6] = 0x05;			//sub version??
+			else //PELIKAN_LITE
+				packet[6] = 0x03;			//sub version??
+			packet[7] = 0x00;				//??
+		}
+		packet[8] = 0x55;					//??
 		packet_length = 10;
 	}
 	else
 	{
 		//ID
 		packet[1]  = rx_tx_addr[0];
-		packet[7]  = rx_tx_addr[1];
-		packet[12] = rx_tx_addr[2];
-		packet[13] = rx_tx_addr[3];
-		//Channels
-		uint8_t offset=upper?4:0;
-		uint16_t channel=convert_channel_16b_nolimit(CH_AETR[offset++], 153, 871);
-		uint8_t top=(channel>>2) & 0xC0;
-		packet[2]  = channel;
-		channel=convert_channel_16b_nolimit(CH_AETR[offset++], 153, 871);
-		top|=(channel>>4) & 0x30;
-		packet[3]  = channel;
-		channel=convert_channel_16b_nolimit(CH_AETR[offset++], 153, 871);
-		top|=(channel>>6) & 0x0C;
-		packet[4]  = channel;
-		channel=convert_channel_16b_nolimit(CH_AETR[offset], 153, 871);
-		top|=(channel>>8) & 0x03;
-		packet[5]  = channel;
-		packet[6]  = top;
-		//Check
-		crc8=0x15;
-		for(uint8_t i=1;i<8;i++)
-			crc8+=packet[i];
-		packet[8]=crc8;
-		//Low/Up channel flag
-		packet[9]=upper?0xAA:0x00;
-		upper=!upper;
-		//Hopping counters
-		if(sub_protocol==PELIKAN_LITE || ++packet_count>4)
+		if(sub_protocol == PELIKAN_SCX24)
 		{
-			packet_count=0;
-			if(++hopping_frequency_no>=PELIKAN_NUM_RF_CHAN)
-				hopping_frequency_no=0;
+			//ID
+			packet[4]  = rx_tx_addr[1];
+			//Channels
+			channel = Channel_data[0];		//STEERING: 1B1..23B..2C5 ???
+			packet[2]  = channel >> 9;
+			packet[3]  = channel >> 1;
+			channel = Channel_data[1];		//THROTTLE: 0DB..1FF..30E
+			packet[5]  = channel >> 9;
+			packet[6]  = channel >> 1;
+			channel = Channel_data[2];		//CH3: 055..3AA
+			packet[7]  = channel >> 9;
+			packet[8]  = channel >> 1;
+			//Hopping counters
+			if(++packet_count>2)
+			{
+				packet_count=0;
+				if(++hopping_frequency_no>=PELIKAN_NUM_RF_CHAN)
+					hopping_frequency_no=0;
+			}
+			//Length
+			packet_length = 14;
 		}
-		packet[10]=hopping_frequency_no;
-		packet[11]=packet_count;
-
-		packet_length = 15;
+		else
+		{//PELIKAN_PRO & PELIKAN_LITE
+			//ID
+			packet[7]  = rx_tx_addr[1];
+			//Channels
+			uint8_t offset=upper?4:0;
+			channel=convert_channel_16b_nolimit(CH_AETR[offset++], 153, 871,false);
+			uint8_t top=(channel>>2) & 0xC0;
+			packet[2]  = channel;
+			channel=convert_channel_16b_nolimit(CH_AETR[offset++], 153, 871,false);
+			top|=(channel>>4) & 0x30;
+			packet[3]  = channel;
+			channel=convert_channel_16b_nolimit(CH_AETR[offset++], 153, 871,false);
+			top|=(channel>>6) & 0x0C;
+			packet[4]  = channel;
+			channel=convert_channel_16b_nolimit(CH_AETR[offset], 153, 871,false);
+			top|=(channel>>8) & 0x03;
+			packet[5]  = channel;
+			packet[6]  = top;
+			//Check
+			sum=0x00;
+			for(uint8_t i=0;i<8;i++)
+				sum+=packet[i];
+			packet[8]=sum;
+			//Low/Up channel flag
+			packet[9]=upper?0xAA:0x00;
+			upper=!upper;
+			//Hopping counters
+			if(sub_protocol==PELIKAN_LITE || ++packet_count>4)
+			{
+				packet_count=0;
+				if(++hopping_frequency_no>=PELIKAN_NUM_RF_CHAN)
+					hopping_frequency_no=0;
+			}
+			//Length
+			packet_length = 15;
+		}
+		//Hopping
+		packet[packet_length-5] = hopping_frequency_no;
+		packet[packet_length-4] = packet_count;
+		//ID
+		packet[packet_length-3] = rx_tx_addr[2];
+		packet[packet_length-2] = rx_tx_addr[3];
 	}
 
 	//Check
-	crc8=0x15;
-	for(uint8_t i=1; i<packet_length-1 ;i++)
-		crc8+=packet[i];
-	packet[packet_length-1]=crc8;
+	sum=0x00;
+	for(uint8_t i=0; i<packet_length-1 ;i++)
+		sum+=packet[i];
+	packet[packet_length-1] = sum;
 
 	//Send
 	#ifdef DEBUG_SERIAL
-		if(packet[9]==0x00)
-		{
-			debug("C: %02X P(%d):",IS_BIND_IN_PROGRESS?PELIKAN_BIND_RF:hopping_frequency[hopping_frequency_no],packet_length);
-			for(uint8_t i=0;i<packet_length;i++)
-				debug(" %02X",packet[i]);
-			debugln("");
-		}
+		debug("C: %02X P(%d):",IS_BIND_IN_PROGRESS?PELIKAN_BIND_RF:hopping_frequency[hopping_frequency_no],packet_length);
+		for(uint8_t i=0;i<packet_length;i++)
+			debug(" %02X",packet[i]);
+		debugln("");
 	#endif
 	A7105_WriteData(packet_length, IS_BIND_IN_PROGRESS?PELIKAN_BIND_RF:hopping_frequency[hopping_frequency_no]);
 	A7105_SetPower();
 }
 
-uint16_t ReadPelikan()
+uint16_t PELIKAN_callback()
 {
 	if(phase==0)
 	{
@@ -125,17 +171,19 @@ uint16_t ReadPelikan()
 				BIND_DONE;
 				A7105_Strobe(A7105_STANDBY);
 				if(sub_protocol==PELIKAN_PRO)
-					A7105_WriteReg(A7105_03_FIFOI,0x28);
+					A7105_WriteReg(A7105_03_FIFOI,0x28); //????
+				else if(sub_protocol==PELIKAN_SCX24)
+					A7105_WriteReg(A7105_03_FIFOI,0x0D);
 				else//PELIKAN_LITE
-					A7105_WriteID((rx_tx_addr[0]<<24)|(rx_tx_addr[1]<<16)|(rx_tx_addr[2]<<8)|(rx_tx_addr[3]));
+					A7105_WriteID(MProtocol_id);
 			}
 		}
 		#ifdef MULTI_SYNC
-			telemetry_set_input_sync(sub_protocol==PELIKAN_PRO?PELIKAN_PACKET_PERIOD:PELIKAN_LITE_PACKET_PERIOD);
+			telemetry_set_input_sync(packet_period);
 		#endif
 		pelikan_build_packet();
-		if(sub_protocol==PELIKAN_PRO || IS_BIND_IN_PROGRESS)
-			return PELIKAN_PACKET_PERIOD;
+		if(IS_BIND_IN_PROGRESS || sub_protocol != PELIKAN_LITE)
+			return packet_period;
 		//PELIKAN_LITE
 		phase++;
 		return 942;
@@ -241,19 +289,26 @@ const uint8_t PROGMEM pelikan_lite_hopp[][PELIKAN_NUM_RF_CHAN] = {
 	{ 0x46,0x2A,0x3E,0x5A,0x5C,0x24,0x4E,0x32,0x54,0x26,0x2C,0x34,0x56,0x1E,0x3A,0x3C,0x50,0x4A,0x2E,0x42,0x20,0x52,0x28,0x22,0x44,0x58,0x36,0x38,0x4C }
 };
 #endif
+#ifdef PELIKAN_SCX24_FORCE_HOP
+const uint8_t PROGMEM pelikan_scx24_hopp[][PELIKAN_NUM_RF_CHAN] = {
+	{ 0x1E,0x32,0x46,0x5A,0x44,0x58,0x2E,0x42,0x56,0x2C,0x40,0x54,0x2A,0x3E,0x52,0x28,0x3C,0x50,0x26,0x3A,0x4E,0x24,0x38,0x4C,0x22,0x36,0x4A,0x20,0x1A },
+	{ 0x2C,0x44,0x1E,0x52,0x56,0x22,0x3A,0x3E,0x34,0x4C,0x26,0x5A,0x50,0x2A,0x42,0x38,0x2E,0x46,0x20,0x54,0x4A,0x24,0x3C,0x32,0x28,0x40,0x58,0x1B,0x4E }
+};
+#endif
 
-uint16_t initPelikan()
+void PELIKAN_init()
 {
 	A7105_Init();
 	if(IS_BIND_IN_PROGRESS || sub_protocol==PELIKAN_LITE)
 		A7105_WriteReg(A7105_03_FIFOI,0x10);
 
-	pelikan_init_hop();
+	bind_counter = PELIKAN_BIND_COUNT;
 
-	//ID from dump
-	#if defined(PELIKAN_FORCE_ID)
-		if(sub_protocol==PELIKAN_PRO)
-		{
+	if(sub_protocol==PELIKAN_PRO)
+	{
+		pelikan_init_hop();
+		//ID from dump
+		#if defined(PELIKAN_FORCE_ID)
 			rx_tx_addr[0]=0x0D;		// hopping freq
 			rx_tx_addr[1]=0xF4;		// hopping freq
 			rx_tx_addr[2]=0x50;		// ID
@@ -261,16 +316,14 @@ uint16_t initPelikan()
 			// Fill frequency table
 			for(uint8_t i=0;i<PELIKAN_NUM_RF_CHAN;i++)
 				hopping_frequency[i]=pgm_read_byte_near(&pelikan_hopp[0][i]);
-		}
-	#endif
-	#if defined(PELIKAN_LITE_FORCE_ID) || defined(PELIKAN_LITE_FORCE_HOP)
+		#endif
+		packet_period = PELIKAN_PACKET_PERIOD;
+	}
+	else
+	{
+		bind_counter >>= 1;
 		if(sub_protocol==PELIKAN_LITE)
 		{
-			#if defined(PELIKAN_LITE_FORCE_ID)
-				// ID
-				rx_tx_addr[2]=0x60;
-				rx_tx_addr[3]=0x18;
-			#endif
 			#if defined(PELIKAN_LITE_FORCE_HOP)
 				// Hop frequency table
 				rx_tx_addr[0]=0x04;		// hopping freq
@@ -278,15 +331,52 @@ uint16_t initPelikan()
 				for(uint8_t i=0;i<PELIKAN_NUM_RF_CHAN;i++)
 					hopping_frequency[i]=pgm_read_byte_near(&pelikan_lite_hopp[0][i]);
 			#endif
+			#if defined(PELIKAN_LITE_FORCE_ID)
+				// ID
+				rx_tx_addr[2]=0x60;
+				rx_tx_addr[3]=0x18;
+			#endif
+			MProtocol_id = ((uint32_t)rx_tx_addr[0]<<24)|((uint32_t)rx_tx_addr[1]<<16)|((uint32_t)rx_tx_addr[2]<<8)|(rx_tx_addr[3]);
+			if(IS_BIND_DONE)
+				A7105_WriteID(MProtocol_id);
+			packet_period = PELIKAN_LITE_PACKET_PERIOD;
 		}
-	#endif
+		else// if(sub_protocol==PELIKAN_SCX24)
+		{
+			#if defined(PELIKAN_SCX24_FORCE_HOP)
+				// Hop frequency table
+				uint8_t num=rx_tx_addr[3] & 0x01;
+				if(num)
+				{//1
+					rx_tx_addr[0]=0x10;		// hopping freq TX2
+					rx_tx_addr[1]=0x63;		// hopping freq TX2
+				}
+				else
+				{//0
+					rx_tx_addr[0]=0x12;		// hopping freq TX1
+					rx_tx_addr[1]=0x46;		// hopping freq TX1
+				}
 
-	if(sub_protocol==PELIKAN_LITE && IS_BIND_DONE)
-		A7105_WriteID((rx_tx_addr[0]<<24)|(rx_tx_addr[1]<<16)|(rx_tx_addr[2]<<8)|(rx_tx_addr[3]));
+				for(uint8_t i=0;i<PELIKAN_NUM_RF_CHAN;i++)
+					hopping_frequency[i]=pgm_read_byte_near(&pelikan_scx24_hopp[num][i]);
+			#endif
+			#if defined(PELIKAN_SCX24_FORCE_ID)
+				// ID
+				rx_tx_addr[2]=0x80;			// TX1
+				rx_tx_addr[3]=0x19;			// TX1
+				rx_tx_addr[2]=0x80;			// TX2
+				rx_tx_addr[3]=0x22;			// TX2
+			#endif
+			A7105_WriteReg(A7105_0E_DATA_RATE,0x03);
+			if(IS_BIND_DONE)
+				A7105_WriteReg(A7105_03_FIFOI,0x0D);
+			packet_period = PELIKAN_SCX24_PACKET_PERIOD;
+		}
+	}
 
-	hopping_frequency_no=PELIKAN_NUM_RF_CHAN;
-	packet_count=5;
-	phase=0;
-	return 2400;
+	hopping_frequency_no = PELIKAN_NUM_RF_CHAN;
+	packet_count = 5;
+	phase = 0;
+	bind_counter = PELIKAN_BIND_COUNT;
 }
 #endif

Multiprotocol/Propel_nrf24l01.ino

@@ -155,27 +155,21 @@ static void __attribute__((unused)) PROPEL_data_packet()
 	NRF24L01_WritePayload(packet, PROPEL_PACKET_SIZE);
 }
 
-static void __attribute__((unused)) PROPEL_init()
+static void __attribute__((unused)) PROPEL_RF_init()
 {
 	NRF24L01_Initialize();
+
 	NRF24L01_WriteReg(NRF24L01_00_CONFIG, 0x7f);
-	NRF24L01_WriteReg(NRF24L01_01_EN_AA, 0x3f);       // AA on all pipes
-	NRF24L01_WriteReg(NRF24L01_02_EN_RXADDR, 0x3f);   // Enable all pipes
-	NRF24L01_WriteReg(NRF24L01_03_SETUP_AW, 0x03);    // 5-byte address
-	NRF24L01_WriteReg(NRF24L01_04_SETUP_RETR, 0x36);  // retransmit 1ms, 6 times
-	NRF24L01_SetBitrate(NRF24L01_BR_1M);              // 1Mbps
-	NRF24L01_SetPower();
-	NRF24L01_WriteReg(NRF24L01_07_STATUS, 0x07);      // ?? match protocol capture
+	NRF24L01_WriteReg(NRF24L01_01_EN_AA, 0x3f);			// AA on all pipes
+	NRF24L01_WriteReg(NRF24L01_02_EN_RXADDR, 0x3f);		// Enable all pipes
+	NRF24L01_WriteReg(NRF24L01_04_SETUP_RETR, 0x36);	// retransmit 1ms, 6 times
 	NRF24L01_WriteRegisterMulti(NRF24L01_0A_RX_ADDR_P0, (uint8_t *)"\x99\x77\x55\x33\x11", PROPEL_ADDRESS_LENGTH);	//Bind address
 	NRF24L01_WriteRegisterMulti(NRF24L01_10_TX_ADDR,    (uint8_t *)"\x99\x77\x55\x33\x11", PROPEL_ADDRESS_LENGTH);	//Bind address
 	NRF24L01_WriteReg(NRF24L01_05_RF_CH, PROPEL_BIND_RF_CHANNEL);
-	NRF24L01_Activate(0x73);                          // Activate feature register
-	NRF24L01_WriteReg(NRF24L01_1C_DYNPD, 0x3f);       // Enable dynamic payload length
-	NRF24L01_WriteReg(NRF24L01_1D_FEATURE, 0x07);     // Enable all features
-	// Beken 2425 register bank 1 initialized here in stock tx capture
-	// Hopefully won't matter for nRF compatibility
-	NRF24L01_FlushTx();
-    NRF24L01_SetTxRxMode(TX_EN);
+	NRF24L01_WriteReg(NRF24L01_1C_DYNPD, 0x3f);			// Enable dynamic payload length
+	NRF24L01_WriteReg(NRF24L01_1D_FEATURE, 0x07);		// Enable all features
+
+	NRF24L01_SetTxRxMode(TX_EN);						// Clear data ready, data sent, retransmit and enable CRC 16bits, ready for TX
 }
 
 const uint8_t PROGMEM PROPEL_hopping []= { 0x47,0x36,0x27,0x44,0x33,0x0D,0x3C,0x2E,0x1B,0x39,0x2A,0x18 };
@@ -281,14 +275,13 @@ uint16_t PROPEL_callback()
 	return PROPEL_PACKET_PERIOD;
 }
 
-uint16_t initPROPEL()
+void PROPEL_init()
 {
 	BIND_IN_PROGRESS;	// autobind protocol
 	PROPEL_initialize_txid();
-	PROPEL_init();
+	PROPEL_RF_init();
 	hopping_frequency_no = 0;
 	phase=PROPEL_BIND1;
-	return PROPEL_INITIAL_WAIT;
 }
 
 #endif

Multiprotocol/Q303_ccnrf.ino

@@ -13,9 +13,9 @@
  along with Multiprotocol.  If not, see <http://www.gnu.org/licenses/>.
  */
 
-#if defined(Q303_NRF24L01_INO)
+#if defined(Q303_CCNRF_INO)
 
-#include "iface_nrf24l01.h"
+#include "iface_xn297.h"
 
 #define Q303_BIND_COUNT			1500
 #define Q303_INITIAL_WAIT		500
@@ -174,10 +174,10 @@ static uint8_t __attribute__((unused))  cx35_lastButton()
 	return command;
 }
 
-static void __attribute__((unused)) Q303_send_packet(uint8_t bind)
+static void __attribute__((unused)) Q303_send_packet()
 {
 	uint16_t aileron, elevator, throttle, rudder, slider;
-	if(bind)
+	if(IS_BIND_IN_PROGRESS)
 	{
 		packet[0] = 0xaa;
 		memcpy(&packet[1], rx_tx_addr + 1, 4);
@@ -185,6 +185,11 @@ static void __attribute__((unused)) Q303_send_packet(uint8_t bind)
 	}
 	else
 	{
+		//RF freq
+		XN297_Hopping(hopping_frequency_no++);
+		hopping_frequency_no %= rf_ch_num;
+
+		//Build packet
 		packet[0] = 0x55;
 		// sticks
 		switch(sub_protocol)
@@ -267,51 +272,27 @@ static void __attribute__((unused)) Q303_send_packet(uint8_t bind)
 		}
 	}
 
-	// Power on, TX mode, CRC enabled
-	XN297_Configure(_BV(NRF24L01_00_EN_CRC) | _BV(NRF24L01_00_CRCO) | _BV(NRF24L01_00_PWR_UP));
-
-	NRF24L01_WriteReg(NRF24L01_05_RF_CH, bind ? Q303_RF_BIND_CHANNEL : hopping_frequency[hopping_frequency_no++]);
-	hopping_frequency_no %= rf_ch_num;
-
-	NRF24L01_WriteReg(NRF24L01_07_STATUS, 0x70);
-	NRF24L01_FlushTx();
-
+	// Send
+	XN297_SetPower();
+	XN297_SetFreqOffset();
+	XN297_SetTxRxMode(TX_EN);
 	XN297_WritePayload(packet, packet_length);
-
-	NRF24L01_SetPower();	// Set tx_power
 }
 
-static void __attribute__((unused)) Q303_init()
+static void __attribute__((unused)) Q303_RF_init()
 {
 	const uint8_t bind_address[] = {0xcc,0xcc,0xcc,0xcc,0xcc};
 
-	NRF24L01_Initialize();
-	NRF24L01_SetTxRxMode(TX_EN);
-	switch(sub_protocol)
+	if(sub_protocol==Q303)
 	{
-		case CX35:
-		case CX10D:
-		case CX10WD:
-			NRF24L01_SetBitrate(NRF24L01_BR_1M);
-			break;
-		case Q303:
-			XN297_SetScrambledMode(XN297_UNSCRAMBLED);
-			NRF24L01_SetBitrate(NRF24L01_BR_250K);
-			break;
+		XN297_Configure(XN297_CRCEN, XN297_UNSCRAMBLED, XN297_250K);
+		XN297_HoppingCalib(rf_ch_num);
 	}
+	else
+		XN297_Configure(XN297_CRCEN, XN297_SCRAMBLED, XN297_1M);
+
 	XN297_SetTXAddr(bind_address, 5);
-	NRF24L01_FlushTx();
-	NRF24L01_FlushRx();
-	NRF24L01_WriteReg(NRF24L01_07_STATUS, 0x70);		// Clear data ready, data sent, and retransmit
-	NRF24L01_WriteReg(NRF24L01_01_EN_AA, 0x00);			// No Auto Acknowldgement on all data pipes
-	NRF24L01_WriteReg(NRF24L01_02_EN_RXADDR, 0x01);
-	NRF24L01_WriteReg(NRF24L01_03_SETUP_AW, 0x03);
-	NRF24L01_WriteReg(NRF24L01_04_SETUP_RETR, 0x00);	// no retransmits
-	NRF24L01_SetPower();
-	NRF24L01_Activate(0x73);							// Activate feature register
-	NRF24L01_WriteReg(NRF24L01_1C_DYNPD, 0x00);			// Disable dynamic payload length on all pipes
-	NRF24L01_WriteReg(NRF24L01_1D_FEATURE, 0x01);		// Set feature bits on
-	NRF24L01_Activate(0x73);
+	XN297_RFChannel(Q303_RF_BIND_CHANNEL);
 }
 
 static void __attribute__((unused)) Q303_initialize_txid()
@@ -353,34 +334,27 @@ static void __attribute__((unused)) Q303_initialize_txid()
 
 uint16_t Q303_callback()
 {
-	if(IS_BIND_DONE)
-	{
-		#ifdef MULTI_SYNC
-			telemetry_set_input_sync(packet_period);
-		#endif
-		Q303_send_packet(0);
-	}
-	else
+	#ifdef MULTI_SYNC
+		telemetry_set_input_sync(packet_period);
+	#endif
+	if(bind_counter)
 	{
+		bind_counter--;
 		if (bind_counter == 0)
 		{
 			XN297_SetTXAddr(rx_tx_addr, 5);
 			packet_count = 0;
 			BIND_DONE;
 		}
-		else
-		{
-			Q303_send_packet(1);
-			bind_counter--;
-		}
 	}
+	Q303_send_packet();
 	return packet_period;
 }
 
-uint16_t initQ303()
+void Q303_init()
 {
 	Q303_initialize_txid();
-	Q303_init();
+	Q303_RF_init();
 	bind_counter = Q303_BIND_COUNT;
 	switch(sub_protocol)
 	{
@@ -407,7 +381,6 @@ uint16_t initQ303()
 	}
 	hopping_frequency_no = 0;
 	BIND_IN_PROGRESS;	// autobind protocol
-	return Q303_INITIAL_WAIT;
 }
 
 #endif

Multiprotocol/Q90C_ccnrf.ino

@@ -14,9 +14,9 @@ Multiprotocol is distributed in the hope that it will be useful,
  */
 // Compatible with Q90C quad.
 
-#if defined(Q90C_NRF24L01_INO)
+#if defined(Q90C_CCNRF_INO)
 
-#include "iface_nrf250k.h"
+#include "iface_xn297.h"
 
 //#define FORCE_Q90C_ORIGINAL_ID
 
@@ -51,7 +51,7 @@ static void __attribute__((unused)) Q90C_send_packet()
 	}
 	else
 	{
-		XN297L_Hopping(hopping_frequency_no++);				// RF Freq
+		XN297_Hopping(hopping_frequency_no++);				// RF Freq
 		hopping_frequency_no %= Q90C_RF_NUM_CHANNELS;
 		packet[0]= convert_channel_8b(THROTTLE);			// 0..255
 		// A,E,R have weird scaling, 0x00-0xff range (unsigned) but center isn't 7f or 80
@@ -108,9 +108,11 @@ static void __attribute__((unused)) Q90C_send_packet()
 		packet[11] = sum ^ crc8;
 	}
 
-	XN297L_SetFreqOffset();									// Set frequency offset
-	XN297L_SetPower();										// Set tx_power
-	XN297L_WriteEnhancedPayload(packet, Q90C_PACKET_SIZE, 0);
+	// Send
+	XN297_SetFreqOffset();									// Set frequency offset
+	XN297_SetPower();										// Set tx_power
+	XN297_SetTxRxMode(TX_EN);
+	XN297_WriteEnhancedPayload(packet, Q90C_PACKET_SIZE, 0);
 }
 
 static void __attribute__((unused)) Q90C_initialize_txid()
@@ -131,15 +133,15 @@ static void __attribute__((unused)) Q90C_initialize_txid()
 	crc8=rx_tx_addr[0]^rx_tx_addr[1]^rx_tx_addr[2]^rx_tx_addr[3];
 }
 
-static void __attribute__((unused)) Q90C_init()
+static void __attribute__((unused)) Q90C_RF_init()
 {
-	XN297L_Init();
+	XN297_Configure(XN297_CRCEN, XN297_SCRAMBLED, XN297_250K);
 	if(IS_BIND_IN_PROGRESS)
-		XN297L_SetTXAddr((uint8_t*)"\x4F\x43\x54\x81\x81", Q90C_ADDRESS_LENGTH);
+		XN297_SetTXAddr((uint8_t*)"\x4F\x43\x54\x81\x81", Q90C_ADDRESS_LENGTH);
 	else
-		XN297L_SetTXAddr(rx_tx_addr, Q90C_ADDRESS_LENGTH);
-	XN297L_HoppingCalib(Q90C_RF_NUM_CHANNELS);				// Calibrate all channels
-	XN297L_RFChannel(Q90C_RF_BIND_CHANNEL);					// Set bind channel
+		XN297_SetTXAddr(rx_tx_addr, Q90C_ADDRESS_LENGTH);
+	XN297_HoppingCalib(Q90C_RF_NUM_CHANNELS);				// Calibrate all channels
+	XN297_RFChannel(Q90C_RF_BIND_CHANNEL);					// Set bind channel
 }
 
 uint16_t Q90C_callback()
@@ -147,20 +149,20 @@ uint16_t Q90C_callback()
 	#ifdef MULTI_SYNC
 		telemetry_set_input_sync(Q90C_PACKET_PERIOD);
 	#endif
-	if(IS_BIND_IN_PROGRESS)
+	if(bind_counter)
 		if(--bind_counter==0)
 		{
 			BIND_DONE;
-			XN297L_SetTXAddr(rx_tx_addr, Q90C_ADDRESS_LENGTH);
+			XN297_SetTXAddr(rx_tx_addr, Q90C_ADDRESS_LENGTH);
 		}
 	Q90C_send_packet();
 	return Q90C_PACKET_PERIOD;
 }
 
-uint16_t initQ90C()
+void Q90C_init()
 {
 	Q90C_initialize_txid();
-	Q90C_init();
+	Q90C_RF_init();
 	hopping_frequency_no = 0;
 	packet_count = 0;
 	bind_counter=Q90C_BIND_COUNT;
@@ -170,7 +172,6 @@ uint16_t initQ90C()
 	Q90C_VTX=CH6_SW;
 	packet[8]  = 0x00;
 	packet[9]  = 0x00;
-	return Q90C_INITIAL_WAIT;
 }
 
 #endif

Multiprotocol/REALACC_nrf24l01.ino

@@ -0,0 +1,146 @@
+/*
+ This project is free software: you can redistribute it and/or modify
+ it under the terms of the GNU General Public License as published by
+ the Free Software Foundation, either version 3 of the License, or
+ (at your option) any later version.
+
+Multiprotocol is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ GNU General Public License for more details.
+
+ You should have received a copy of the GNU General Public License
+ along with Multiprotocol.  If not, see <http://www.gnu.org/licenses/>.
+ */
+// Compatible with Realacc R11
+
+#if defined(REALACC_NRF24L01_INO)
+
+#include "iface_xn297.h"
+
+#define FORCE_REALACC_ORIGINAL_ID
+
+#define REALACC_INITIAL_WAIT		500
+#define REALACC_PACKET_PERIOD		2268
+#define REALACC_BIND_RF_CHANNEL		80
+#define REALACC_BIND_PAYLOAD_SIZE	10
+#define REALACC_PAYLOAD_SIZE		13
+#define REALACC_BIND_COUNT			50
+#define REALACC_RF_NUM_CHANNELS		5
+
+static void __attribute__((unused)) REALACC_send_packet()
+{
+	packet[ 0]= 0xDC;
+	packet[ 1]= convert_channel_8b(AILERON);	// 00..80..FF
+	packet[ 2]= convert_channel_8b(ELEVATOR);	// 00..80..FF
+	packet[ 3]= convert_channel_8b(THROTTLE);	// 00..FF
+	packet[ 4]= convert_channel_8b(RUDDER);		// 00..80..FF
+	packet[ 5]= 0x20; 							// Trim
+	packet[ 6]= 0x20; 							// Trim
+	packet[ 7]= 0x20; 							// Trim
+	packet[ 8]= 0x20; 							// Trim
+	packet[ 9]= num_ch;							// Change at each power up
+	packet[10]= 0x04 							// Flag1
+		| 0x02									//   Rate1=0, Rate2=1, Rate3=2
+		| GET_FLAG(CH8_SW, 0x20);				//   Headless
+	packet[11]= 0x00 							// Flag2
+		| GET_FLAG(CH7_SW, 0x01)				//   Calib
+		| GET_FLAG(CH9_SW, 0x20)				//   Return
+		| GET_FLAG(CH10_SW,0x80);				//   Unknown
+	packet[12]= 0x00 							// Flag3
+		| GET_FLAG(CH5_SW, 0x01)				//   Flip
+		| GET_FLAG(CH6_SW, 0x80);				//   Light
+
+	XN297_Hopping(hopping_frequency_no);
+	hopping_frequency_no++;
+	hopping_frequency_no %= REALACC_RF_NUM_CHANNELS;
+	XN297_WriteEnhancedPayload(packet, REALACC_PAYLOAD_SIZE,0);
+}
+
+static void __attribute__((unused)) REALACC_send_bind_packet()
+{
+	packet[0] = 0xB1;
+	memcpy(&packet[1],rx_tx_addr,4);
+	memcpy(&packet[5],hopping_frequency,5);
+
+	XN297_WriteEnhancedPayload(packet, REALACC_BIND_PAYLOAD_SIZE,1);
+}
+
+static void __attribute__((unused)) REALACC_initialize_txid()
+{
+	calc_fh_channels(REALACC_RF_NUM_CHANNELS);
+	num_ch=random(0xfefefefe);		// 00..FF
+
+	#ifdef FORCE_REALACC_ORIGINAL_ID
+		//Dump
+		rx_tx_addr[0]=0x99;
+		rx_tx_addr[1]=0x06;
+		rx_tx_addr[2]=0x00;
+		rx_tx_addr[3]=0x00;
+		hopping_frequency[0]=0x55;
+		hopping_frequency[1]=0x59;
+		hopping_frequency[2]=0x5A;
+		hopping_frequency[3]=0x5A;
+		hopping_frequency[4]=0x62;
+		num_ch=0xC5;				// Value in dumps: C5 A2 77 F0 84 58
+	#endif
+}
+
+static void __attribute__((unused)) REALACC_RF_init()
+{
+	XN297_Configure(XN297_CRCEN, XN297_SCRAMBLED, XN297_1M);
+	XN297_SetTXAddr((uint8_t*)"MAIN", 4);
+	XN297_RFChannel(REALACC_BIND_RF_CHANNEL);	// Set bind channel
+}
+
+uint16_t REALACC_callback()
+{
+	#ifdef MULTI_SYNC
+		telemetry_set_input_sync(REALACC_PACKET_PERIOD);
+	#endif
+	XN297_SetPower();
+	XN297_SetTxRxMode(TX_EN);
+	if(IS_BIND_IN_PROGRESS)
+	{
+		REALACC_send_bind_packet();
+		if(--bind_counter==0)
+		{
+			BIND_DONE;
+			XN297_SetTXAddr(rx_tx_addr, 4);
+		}
+	}
+	else
+		REALACC_send_packet();
+	return REALACC_PACKET_PERIOD;
+}
+
+void REALACC_init()
+{
+	BIND_IN_PROGRESS;	// autobind protocol
+	REALACC_initialize_txid();
+	REALACC_RF_init();
+	bind_counter=REALACC_BIND_COUNT;
+	hopping_frequency_no=0;
+}
+
+#endif
+
+// XN297 speed 1Mb, scrambled, enhanced
+// Bind
+//   Address = 4D 41 49 4E = 'MAIN'
+//   Channel = 80 (most likely from dump)
+//   P(10) = B1 99 06 00 00 55 59 5A 5A 62
+//     B1 indicates bind packet
+//     99 06 00 00 = ID = address of normal packets
+//     55 59 5A 5A 62 = 85, 89, 90, 90, 98 = RF channels to be used (kind of match previous dumps)// Normal
+// Normal
+//   Address = 99 06 00 00
+//   Channels = 84, 89, 90, 90, 98 (guess from bind)
+//   P(13)= DC 80 80 32 80 20 20 20 20 58 04 00 00
+//   DC = normal packet
+//   80 80 32 80 : AETR 00..80..FF
+//   20 20 20 20 : Trims
+//   58 : changing every time the TX restart
+//   04 : |0x20=headless, |0x01=rate2, |0x02=rate3
+//   00 : |0x01=calib, |0x20=return, |0x80=unknown
+//   00 : |0x80=light, |0x01=flip

Multiprotocol/RF2500_EMU.ino

@@ -0,0 +1,104 @@
+/*
+ This project is free software: you can redistribute it and/or modify
+ it under the terms of the GNU General Public License as published by
+ the Free Software Foundation, either version 3 of the License, or
+ (at your option) any later version.
+
+ Multiprotocol is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ GNU General Public License for more details.
+
+ You should have received a copy of the GNU General Public License
+ along with Multiprotocol.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#ifdef CYRF6936_INSTALLED
+#include "iface_rf2500.h"
+
+#define RF2500_ADDR_LENGTH 4
+
+uint8_t RF2500_payload_length, RF2500_tx_addr[RF2500_ADDR_LENGTH], RF2500_buf[80];
+bool RF2500_scramble_enabled;
+
+static void __attribute__((unused)) RF2500_Init(uint8_t payload_length, bool scramble)
+{
+	CYRF_GFSK1M_Init( RF2500_ADDR_LENGTH + 2 + (payload_length+2)*4, 2 );		// full payload length with CRC + address + 5 + FEC
+
+	RF2500_payload_length=payload_length;
+	RF2500_scramble_enabled=scramble;
+}
+
+static void __attribute__((unused)) RF2500_SetTXAddr(const uint8_t* addr)
+{
+	memcpy(RF2500_tx_addr, addr, RF2500_ADDR_LENGTH);
+}
+
+static void __attribute__((unused)) RF2500_BuildPayload(uint8_t* buffer)
+{
+	const uint8_t RF2500_scramble[] = { 0xD0, 0x9E, 0x53, 0x33, 0xD8, 0xBA, 0x98, 0x08, 0x24, 0xCB, 0x3B, 0xFC, 0x71, 0xA3, 0xF4, 0x55 };
+	const uint16_t RF2500_crc_xorout_scramble = 0xAEE4;
+
+	//Scramble the incoming buffer
+	if(RF2500_scramble_enabled)
+		for(uint8_t i=0; i<RF2500_payload_length; i++)
+			buffer[i] ^= RF2500_scramble[i];
+
+	//Add CRC to the buffer
+	crc=0x0000;
+	for(uint8_t i=0;i<RF2500_payload_length;i++)
+		crc16_update(bit_reverse(buffer[i]),8);
+	buffer[RF2500_payload_length  ] = bit_reverse(crc>>8);
+	buffer[RF2500_payload_length+1] = bit_reverse(crc);
+
+	if(RF2500_scramble_enabled)
+	{
+		buffer[RF2500_payload_length  ] ^= RF2500_crc_xorout_scramble>>8;
+		buffer[RF2500_payload_length+1] ^= RF2500_crc_xorout_scramble;
+	}
+
+	#if 0
+		debug("B:");
+		for(uint8_t i=0; i<RF2500_payload_length+2; i++)
+			debug(" %02X",buffer[i]);
+		debugln("");
+	#endif
+
+	memcpy(RF2500_buf,RF2500_tx_addr,RF2500_ADDR_LENGTH);		// Address
+	
+	uint8_t pos = RF2500_ADDR_LENGTH;
+
+	RF2500_buf[pos++]=0xC3;RF2500_buf[pos++]=0xC3;				// 5 FEC encoded
+	memset(&RF2500_buf[pos],0x00,(RF2500_payload_length+2)*4);	// + CRC) * 4 FEC bytes per byte
+	
+	//FEC encode
+	for(uint8_t i=0; i<RF2500_payload_length+2; i++)			// Include CRC
+	{
+		for(uint8_t j=0;j<8;j++)
+		{
+			uint8_t offset=pos + (i<<2) + (j>>1);
+			RF2500_buf[offset] <<= 4;
+			if( (buffer[i]>>j) & 0x01 )
+				RF2500_buf[offset] |= 0x0C;
+			else
+				RF2500_buf[offset] |= 0x03;
+		}
+	}
+
+	#if 0
+		debug("E:");
+		for(uint8_t i=0; i<RF2500_ADDR_LENGTH+2+(RF2500_payload_length+2)*4; i++)
+			debug(" %02X",RF2500_buf[i]);
+		debugln("");
+	#endif
+
+	//CYRF wants LSB first
+	for(uint8_t i=0; i<RF2500_ADDR_LENGTH+2+(RF2500_payload_length+2)*4; i++)
+		RF2500_buf[i]=bit_reverse(RF2500_buf[i]);
+}
+
+static void __attribute__((unused)) RF2500_SendPayload()
+{
+	CYRF_GFSK1M_SendPayload(RF2500_buf, RF2500_ADDR_LENGTH + 2 + (RF2500_payload_length+2)*4 );
+}
+
+#endif

Multiprotocol/RadioLink_cc2500.ino

@@ -0,0 +1,311 @@
+/*
+ This project is free software: you can redistribute it and/or modify
+ it under the terms of the GNU General Public License as published by
+ the Free Software Foundation, either version 3 of the License, or
+ (at your option) any later version.
+
+ Multiprotocol is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ GNU General Public License for more details.
+
+ You should have received a copy of the GNU General Public License
+ along with Multiprotocol.  If not, see <http://www.gnu.org/licenses/>.
+ */
+// Radiolink surface protocol. TXs: RC4GS,RC6GS. Compatible RXs:R7FG(Std),R6FG,R6F,R8EF,R8FM,R8F,R4FGM 
+
+#if defined(RLINK_CC2500_INO)
+
+#include "iface_cc2500.h"
+
+//#define RLINK_FORCE_ID
+
+#define RLINK_TX_PACKET_LEN	33
+#define RLINK_RX_PACKET_LEN	15
+#define RLINK_TX_ID_LEN		4
+#define RLINK_HOP			16
+
+enum {
+	RLINK_DATA	= 0x00,
+	RLINK_RX1	= 0x01,
+	RLINK_RX2	= 0x02,
+};
+
+uint32_t RLINK_rand1;
+uint32_t RLINK_rand2;
+
+static uint32_t __attribute__((unused)) RLINK_prng_next(uint32_t r)
+{
+	return 0xA5E2A705 * r + 0x754DB79B;
+}
+
+static void __attribute__((unused)) RLINK_init_random(uint32_t id)
+{
+	uint32_t result = id;
+
+	RLINK_rand2 = result;
+	for (uint8_t i=0; i<31; i++)
+		result = RLINK_prng_next(result);
+	RLINK_rand1 = result;
+}
+
+static uint8_t __attribute__((unused)) RLINK_next_random_swap()
+{
+	uint8_t result = (RLINK_rand2 >> 16) + RLINK_rand2 + (RLINK_rand1 >> 16) + RLINK_rand1;
+
+	RLINK_rand2 = RLINK_prng_next(RLINK_rand2);
+	RLINK_rand1 = RLINK_prng_next(RLINK_rand1);
+
+	return result & 0x0F;
+}
+
+static uint32_t __attribute__((unused)) RLINK_compute_start_id(uint32_t id)
+{
+	return id * 0xF65EF9F9u + 0x2EDDF6CAu;
+}
+
+static void __attribute__((unused)) RLINK_shuffle_freqs(uint32_t seed)
+{
+	RLINK_init_random(seed);
+
+	for(uint8_t i=0; i<RLINK_HOP; i++)
+	{
+		uint8_t r   = RLINK_next_random_swap();
+		uint8_t tmp = hopping_frequency[r];
+		hopping_frequency[r] = hopping_frequency[i];
+		hopping_frequency[i] = tmp;
+	}
+}
+
+static void __attribute__((unused)) RLINK_hop()
+{
+	uint8_t inc=3*(rx_tx_addr[0]&3);
+	
+	// init hop table
+	for(uint8_t i=0; i<RLINK_HOP; i++)
+		hopping_frequency[i] = (12*i) + inc;
+
+	// shuffle
+	RLINK_shuffle_freqs(RLINK_compute_start_id(rx_tx_addr[0] + (rx_tx_addr[1] << 8)));
+	RLINK_shuffle_freqs(RLINK_compute_start_id(rx_tx_addr[2] + (rx_tx_addr[3] << 8)));
+
+	// replace one of the channel randomely
+	rf_ch_num=random(0xfefefefe)%0x11;		// 0x00..0x10
+	if(inc==9) inc=6;						// frequency exception
+	hopping_frequency[rf_ch_num]=12*16+inc;
+}
+
+static void __attribute__((unused)) RLINK_TXID_init()
+{
+	#ifdef RLINK_FORCE_ID
+		//surface RC6GS
+		memcpy(rx_tx_addr,"\x3A\x99\x22\x3A",RLINK_TX_ID_LEN);
+		//air T8FB
+		//memcpy(rx_tx_addr,"\xFC\x11\x0D\x20",RLINK_TX_ID_LEN);
+	#endif
+	// channels order depend on ID
+	RLINK_hop();
+
+ 	#if 0
+		debug("ID:");
+		for(uint8_t i=0;i<RLINK_TX_ID_LEN;i++)
+			debug(" 0x%02X",rx_tx_addr[i]);
+		debugln("");
+		debug("Hop(%d):", rf_ch_num);
+		for(uint8_t i=0;i<RLINK_HOP;i++)
+			debug(" 0x%02X",hopping_frequency[i]);
+		debugln("");
+	#endif
+ }
+
+const PROGMEM uint8_t RLINK_init_values[] = {
+  /* 00 */ 0x5B, 0x06, 0x5C, 0x07, 0xAB, 0xCD, 0x40, 0x04,
+  /* 08 */ 0x45, 0x00, 0x00, 0x06, 0x00, 0x5C, 0x62, 0x76,
+  /* 10 */ 0x7A, 0x7F, 0x13, 0x23, 0xF8, 0x44, 0x07, 0x30,
+  /* 18 */ 0x18, 0x16, 0x6C, 0x43, 0x40, 0x91, 0x87, 0x6B,
+  /* 20 */ 0xF8, 0x56, 0x10, 0xA9, 0x0A, 0x00, 0x11
+};
+
+static void __attribute__((unused)) RLINK_rf_init()
+{
+	CC2500_Strobe(CC2500_SIDLE);
+
+	for (uint8_t i = 0; i < 39; ++i)
+		CC2500_WriteReg(i, pgm_read_byte_near(&RLINK_init_values[i]));
+
+	if(sub_protocol==RLINK_DUMBORC)
+	{
+		CC2500_WriteReg(4, 0xBA);
+		CC2500_WriteReg(5, 0xDC);
+	}
+
+	CC2500_WriteReg(CC2500_0C_FSCTRL0, option);
+	
+	CC2500_SetTxRxMode(TX_EN);
+}
+
+static void __attribute__((unused)) RLINK_send_packet()
+{
+	static uint32_t pseudo=0;
+	uint32_t bits = 0;
+	uint8_t bitsavailable = 0;
+	uint8_t idx = 6;
+
+	CC2500_Strobe(CC2500_SIDLE);
+
+	// packet length
+	packet[0] = RLINK_TX_PACKET_LEN;
+	// header
+	if(packet_count>3)
+		packet[1] = 0x02;					// 0x02 telemetry request flag
+	else
+		packet[1] = 0x00;					// no telemetry
+
+	switch(sub_protocol)
+	{
+		case RLINK_SURFACE:
+			packet[1] |= 0x01;
+			//radiolink additionnal ID which is working only on a small set of RXs
+			//if(RX_num) packet[1] |= ((RX_num+2)<<4)+4;	// RX number limited to 10 values, 0 is a wildcard
+			break;
+		case RLINK_AIR:
+			packet[1] |= 0x21;					//air 0x21 on dump but it looks to support telemetry at least RSSI
+			break;
+		case RLINK_DUMBORC:
+			packet[1]  = 0x00;					//always 0x00 on dump
+			break;
+	}
+	
+	// ID
+	memcpy(&packet[2],rx_tx_addr,RLINK_TX_ID_LEN);
+
+	// pack 16 channels on 11 bits values between 170 and 1876, 1023 middle. The last 8 channels are failsafe values associated to the first 8 values.
+	for (uint8_t i = 0; i < 16; i++)
+	{
+		uint32_t val = convert_channel_16b_nolimit(i,170,1876,false);		// allow extended limits
+		if (val & 0x8000)
+			val = 0;
+		else if (val > 2047)
+			val=2047;
+
+		bits |= val << bitsavailable;
+		bitsavailable += 11;
+		while (bitsavailable >= 8) {
+			packet[idx++] = bits & 0xff;
+			bits >>= 8;
+			bitsavailable -= 8;
+		}
+	}
+	
+	// hop
+	pseudo=((pseudo * 0xAA) + 0x03) % 0x7673;	// calc next pseudo random value
+	CC2500_WriteReg(CC2500_0A_CHANNR, hopping_frequency[pseudo & 0x0F]);
+	packet[28]= pseudo;
+	packet[29]= pseudo >> 8;
+	packet[30]= 0x00;						// unknown
+	packet[31]= 0x00;						// unknown
+	packet[32]= rf_ch_num;					// index of value changed in the RF table
+	
+	// check
+	uint8_t sum=0;
+	for(uint8_t i=1;i<33;i++)
+		sum+=packet[i];
+	packet[33]=sum;
+
+	// send packet
+	CC2500_WriteData(packet, RLINK_TX_PACKET_LEN+1);
+	
+	// packets type
+	packet_count++;
+	if(packet_count>5) packet_count=0;
+
+	//debugln("C= 0x%02X",hopping_frequency[pseudo & 0x0F]);
+	//debug("P=");
+	//for(uint8_t i=1;i<RLINK_TX_PACKET_LEN+1;i++)
+	//	debug(" 0x%02X",packet[i]);
+	//debugln("");
+}
+
+#define RLINK_TIMING_PROTO	20000-100		// -100 for compatibility with R8EF
+#define RLINK_TIMING_RFSEND	10500
+#define RLINK_TIMING_CHECK	2000
+uint16_t RLINK_callback()
+{
+	switch(phase)
+	{
+		case RLINK_DATA:
+			#ifdef MULTI_SYNC
+				telemetry_set_input_sync(RLINK_TIMING_PROTO);
+			#endif
+			CC2500_SetPower();
+			CC2500_SetFreqOffset();
+			RLINK_send_packet();
+#if not defined RLINK_HUB_TELEMETRY
+			return RLINK_TIMING_PROTO;
+#else
+			if(!(packet[1]&0x02))
+				return RLINK_TIMING_PROTO;					//Normal packet
+															//Telemetry packet
+			phase++;										// RX1
+			return RLINK_TIMING_RFSEND;
+		case RLINK_RX1:
+			CC2500_Strobe(CC2500_SIDLE);
+			CC2500_Strobe(CC2500_SFRX);
+			CC2500_SetTxRxMode(RX_EN);
+			CC2500_Strobe(CC2500_SRX);
+			phase++;										// RX2
+			return RLINK_TIMING_PROTO-RLINK_TIMING_RFSEND-RLINK_TIMING_CHECK;
+		case RLINK_RX2:
+			len = CC2500_ReadReg(CC2500_3B_RXBYTES | CC2500_READ_BURST) & 0x7F;	
+			if (len == RLINK_RX_PACKET_LEN + 1 + 2)			//Telemetry frame is 15 bytes + 1 byte for length + 2 bytes for RSSI&LQI&CRC
+			{
+				//debug("Telem:");
+				CC2500_ReadData(packet_in, len);
+				if(packet_in[0]==RLINK_RX_PACKET_LEN && (packet_in[len-1] & 0x80) && memcmp(&packet[2],rx_tx_addr,RLINK_TX_ID_LEN)==0 && packet_in[6]==packet[1])
+				{//Correct telemetry received: length, CRC, ID and type
+					//Debug
+					//for(uint8_t i=0;i<len;i++)
+					//	debug(" %02X",packet_in[i]);
+					TX_RSSI = packet_in[len-2];
+					if(TX_RSSI >=128)
+						TX_RSSI -= 128;
+					else
+						TX_RSSI += 128;
+					RX_RSSI=packet_in[7];					//Should be packet_in[7]-256 but since it's an uint8_t...
+					v_lipo1=packet_in[8]<<1;				//RX Batt
+					v_lipo2=packet_in[9];					//Batt
+					telemetry_link=1;						//Send telemetry out
+					pps_counter++;
+					packet_count=0;
+				}
+				//debugln("");
+			}
+			if (millis() - pps_timer >= 2000)
+			{//1 telemetry packet every 100ms
+				pps_timer = millis();
+				if(pps_counter<20)
+					pps_counter*=5;
+				else
+					pps_counter=100;
+				debugln("%d pps", pps_counter);
+				TX_LQI = pps_counter;						//0..100%
+				pps_counter = 0;
+			}
+			CC2500_SetTxRxMode(TX_EN);
+			phase=RLINK_DATA;								// DATA
+			return RLINK_TIMING_CHECK;
+#endif
+	}
+	return 0;
+}
+
+void RLINK_init()
+{
+	BIND_DONE;	// Not a TX bind protocol
+	RLINK_TXID_init();
+	RLINK_rf_init();
+	packet_count = 0;
+	phase = RLINK_DATA;
+}
+
+#endif

Multiprotocol/Redpine_cc2500.ino

@@ -96,17 +96,13 @@ static void REDPINE_data_frame() {
         packet[10] = REDPINE_LOOPTIME_SLOW;
 }
 
-static uint16_t ReadREDPINE()
+uint16_t REDPINE_callback()
 {
-	if ( prev_option != option )
-	{ // Frequency adjust
-		CC2500_WriteReg(CC2500_0C_FSCTRL0, option);
-		prev_option = option ;
-	}
+	CC2500_SetFreqOffset();
 	if(IS_BIND_IN_PROGRESS)
 	{
         if (state == REDPINE_BIND) {
-    		REDPINE_init(0);
+    		REDPINE_RF_init(0);
         }
 		REDPINE_set_channel(49);
         CC2500_SetTxRxMode(TX_EN);
@@ -118,26 +114,22 @@ static uint16_t ReadREDPINE()
 		if(--bind_counter==0)
 		{
 			BIND_DONE;
-			REDPINE_init(sub_protocol);
+			REDPINE_RF_init(sub_protocol);
 		}
 		return 4000;
 	}
-	else
-	{
-		#ifdef MULTI_SYNC
-			telemetry_set_input_sync(packet_period);
-		#endif
-		CC2500_SetTxRxMode(TX_EN);
-		REDPINE_set_channel(hopping_frequency_no);
-		CC2500_SetPower();
-		CC2500_Strobe(CC2500_SFRX);
-		REDPINE_data_frame();
-		CC2500_Strobe(CC2500_SIDLE);
-		hopping_frequency_no = (hopping_frequency_no + 1) % 49;
-		CC2500_WriteData(packet, REDPINE_PACKET_SIZE);
-		return packet_period;
-	}
-	return 1;
+	#ifdef MULTI_SYNC
+		telemetry_set_input_sync(packet_period);
+	#endif
+	CC2500_SetTxRxMode(TX_EN);
+	REDPINE_set_channel(hopping_frequency_no);
+	CC2500_SetPower();
+	CC2500_Strobe(CC2500_SFRX);
+	REDPINE_data_frame();
+	CC2500_Strobe(CC2500_SIDLE);
+	hopping_frequency_no = (hopping_frequency_no + 1) % 49;
+	CC2500_WriteData(packet, REDPINE_PACKET_SIZE);
+	return packet_period;
 }
 
 // register, fast 250k, slow
@@ -179,7 +171,7 @@ static const uint8_t REDPINE_init_data[][3] = {
 	{CC2500_3E_PATABLE,   0xff, 0xff}
 };
 
-static void REDPINE_init(uint8_t format)
+static void REDPINE_RF_init(uint8_t format)
 {
 	CC2500_Reset();
 
@@ -189,7 +181,6 @@ static void REDPINE_init(uint8_t format)
 		CC2500_WriteReg(REDPINE_init_data[i][0], REDPINE_init_data[i][format+1]);
 	}
 
-	prev_option = option;
 	CC2500_WriteReg(CC2500_0C_FSCTRL0, option);
 	CC2500_Strobe(CC2500_SIDLE);
 
@@ -204,7 +195,7 @@ static void REDPINE_init(uint8_t format)
 	}
 }
 
-static uint16_t initREDPINE()
+void REDPINE_init()
 {
 	hopping_frequency_no = 0;
 	// Used from kn_nrf24l01.c : kn_calculate_freqency_hopping_channels
@@ -237,8 +228,7 @@ static uint16_t initREDPINE()
 		packet_period = REDPINE_LOOPTIME_SLOW*1000;
 
 	bind_counter=REDPINE_BIND;
-	REDPINE_init(sub_protocol);
+	REDPINE_RF_init(sub_protocol);
 	CC2500_SetTxRxMode(TX_EN);  // enable PA
-	return 10000;
 }
 #endif

Multiprotocol/SHENQI_nrf24l01.ino

@@ -29,15 +29,9 @@ const uint8_t PROGMEM SHENQI_Freq[] = {
 			10,60,10,50,30,40,
 			20,10,40,30,60,20 };
 
-void SHENQI_init()
+void SHENQI_RF_init()
 {
     NRF24L01_Initialize();
-    NRF24L01_WriteReg(NRF24L01_07_STATUS, 0x70);		// Clear data ready, data sent, and retransmit
-    NRF24L01_WriteReg(NRF24L01_01_EN_AA, 0x00);			// No Auto Acknowldgement on all data pipes
-	NRF24L01_SetBitrate(NRF24L01_BR_1M);          // 1Mbps
-    NRF24L01_SetPower();
-
-    NRF24L01_WriteReg(NRF24L01_03_SETUP_AW, 0x03);		// 5 bytes rx/tx address
 
 	LT8900_Config(4, 8, _BV(LT8900_CRC_ON)|_BV(LT8900_PACKET_LENGTH_EN), 0xAA);
 	LT8900_SetChannel(2);
@@ -116,14 +110,13 @@ uint16_t SHENQI_callback()
     return packet_period;
 }
 
-uint16_t initSHENQI()
+void SHENQI_init()
 {
 	BIND_IN_PROGRESS;	// autobind protocol
-	SHENQI_init();
+	SHENQI_RF_init();
 	hopping_frequency_no = 0;
 	packet_count=0;
 	packet_period=500;
-	return 1000;
 }
 
 #endif