Update Protocols_Details.md

Protocol: 69
No sub protocol
No extended limit
RX outputs is be set automatically to the eSky default TAER
16 channels

Multiprotocol/CC2500_SPI.ino

@@ -150,6 +150,11 @@ void CC2500_SetPower()
 		#else
 			power=CC2500_HIGH_POWER;
 		#endif
+	if(IS_LBT_POWER_on)
+	{
+		power=CC2500_LBT_POWER;
+		LBT_POWER_off;			// Only accept once
+	}
 	if(IS_RANGE_FLAG_on)
 		power=CC2500_RANGE_POWER;
 	if(prev_power != power)

Multiprotocol/ESky150v2_cc2500.ino

@@ -0,0 +1,141 @@
+/*
+ This project is free software: you can redistribute it and/or modify
+ it under the terms of the GNU General Public License as published by
+ the Free Software Foundation, either version 3 of the License, or
+ (at your option) any later version.
+
+ Multiprotocol is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ GNU General Public License for more details.
+
+ You should have received a copy of the GNU General Public License
+ along with Multiprotocol.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#if defined(ESKY150V2_CC2500_INO)
+
+#include "iface_nrf250k.h"
+
+//#define ESKY150V2_FORCE_ID
+
+#define ESKY150V2_PAYLOADSIZE 40
+#define ESKY150V2_BINDPAYLOADSIZE 150
+#define ESKY150V2_NFREQCHANNELS 70
+#define ESKY150V2_TXID_SIZE 4
+#define ESKY150V2_BIND_CHANNEL 0x00
+#define ESKY150V2_PACKET_PERIOD 10000
+#define ESKY150V2_BINDING_PACKET_PERIOD 57000
+
+#ifdef ESKY150V2_FORCE_ID
+const uint8_t PROGMEM ESKY150V2_hop[ESKY150V2_NFREQCHANNELS]= {
+	0x07, 0x47, 0x09, 0x27, 0x0B, 0x42, 0x0D, 0x35, 0x17, 0x40, 0x26, 0x3D, 0x16, 0x43, 0x06, 0x2A, 0x24, 0x44,
+	0x0E, 0x38, 0x20, 0x48, 0x22, 0x2D, 0x2B, 0x39, 0x0F, 0x36, 0x23, 0x46, 0x14, 0x3B, 0x1A, 0x41, 0x10, 0x2E,
+	0x1E, 0x28, 0x0C, 0x49, 0x1D, 0x3E, 0x29, 0x2C, 0x25, 0x30, 0x1C, 0x2F, 0x1B, 0x33, 0x13, 0x31, 0x0A, 0x37,
+	0x12, 0x3C, 0x18, 0x4B, 0x11, 0x45, 0x21, 0x4A, 0x1F, 0x3F, 0x15, 0x32, 0x08, 0x3A, 0x19, 0x34 };
+/*const uint8_t PROGMEM ESKY150V2_hop2[40]= {
+	0x19, 0x23, 0x13, 0x1B, 0x09, 0x22, 0x14, 0x27, 0x06, 0x26, 0x16, 0x24, 0x0B, 0x2A, 0x0E, 0x1C, 0x11, 0x1E,
+	0x08, 0x29, 0x0D, 0x28, 0x18, 0x2D, 0x12, 0x20, 0x0C, 0x1A, 0x10, 0x1D, 0x07, 0x2C, 0x0A, 0x2B, 0x0F, 0x25,
+	0x15, 0x1F, 0x17, 0x21 };*/
+#endif
+
+static void __attribute__((unused)) ESKY150V2_set_freq(void)
+{
+	calc_fh_channels(ESKY150V2_NFREQCHANNELS);
+	
+	#ifdef ESKY150V2_FORCE_ID
+		for(uint8_t i=0; i<ESKY150V2_NFREQCHANNELS; i++)
+			hopping_frequency[i]=pgm_read_byte_near( &ESKY150V2_hop[i] );
+	#endif
+	
+	//Bind channel
+	hopping_frequency[ESKY150V2_NFREQCHANNELS]=ESKY150V2_BIND_CHANNEL;
+	
+	//Calib all channels
+	NRF250K_SetFreqOffset();	// Set frequency offset
+	NRF250K_HoppingCalib(ESKY150V2_NFREQCHANNELS+1);
+}
+
+static void __attribute__((unused)) ESKY150V2_send_packet()
+{
+	NRF250K_SetFreqOffset();	// Set frequency offset
+	NRF250K_Hopping(hopping_frequency_no);
+	if (++hopping_frequency_no >= ESKY150V2_NFREQCHANNELS)
+		hopping_frequency_no = 0;
+	NRF250K_SetPower();			//Set power level
+
+	packet[0] = 0xFA;		// Unknown
+	packet[1] = 0x41;		// Unknown
+	packet[2] = 0x08;		// Unknown
+	packet[3] = 0x00;		// Unknown
+	for(uint8_t i=0;i<16;i++)
+	{
+		uint16_t channel=convert_channel_16b_limit(CH_TAER[i],200,1000);
+		packet[4+2*i] = channel;
+		packet[5+2*i] = channel>>8;
+	}
+	NRF250K_WritePayload(packet, ESKY150V2_PAYLOADSIZE);
+}
+
+uint16_t ESKY150V2_callback()
+{
+	if(option==0) option=1; 	//Trick the RF component auto select system
+	if(IS_BIND_DONE)
+	{
+		#ifdef MULTI_SYNC
+			telemetry_set_input_sync(ESKY150V2_PACKET_PERIOD);
+		#endif
+		ESKY150V2_send_packet();
+	}
+	else
+	{
+		BIND_DONE;					//Need full power for bind to work...
+		NRF250K_SetPower();			//Set power level
+		BIND_IN_PROGRESS;
+		NRF250K_WritePayload(packet, ESKY150V2_BINDPAYLOADSIZE);
+		if (--bind_counter == 0)
+		{
+			BIND_DONE;
+			// Change TX address from bind to normal mode
+			NRF250K_SetTXAddr(rx_tx_addr, ESKY150V2_TXID_SIZE);
+			memset(packet,0x00,ESKY150V2_PAYLOADSIZE);
+		}
+		return 30000; //ESKY150V2_BINDING_PACKET_PERIOD;
+	}
+	return ESKY150V2_PACKET_PERIOD;
+}
+
+uint16_t initESKY150V2()
+{
+	if(option==0) option=1;		 // Trick the RF component auto select system
+	NRF250K_Init();
+	ESKY150V2_set_freq();
+	hopping_frequency_no = 0;
+
+	#ifdef ESKY150V2_FORCE_ID	// ID taken from TX dump
+		rx_tx_addr[0]=0x87;rx_tx_addr[1]=0x5B;rx_tx_addr[2]=0x2C;rx_tx_addr[3]=0x5D;
+	#endif
+
+	memset(packet,0x00,ESKY150V2_BINDPAYLOADSIZE);
+
+	if(IS_BIND_IN_PROGRESS)
+	{
+		NRF250K_SetTXAddr((uint8_t *)"\x73\x73\x74\x63", ESKY150V2_TXID_SIZE);	//Bind address
+		NRF250K_Hopping(ESKY150V2_NFREQCHANNELS);	//Bind channel
+		memcpy(packet,"\x73\x73\x74\x63", ESKY150V2_TXID_SIZE);
+		memcpy(&packet[ESKY150V2_TXID_SIZE],rx_tx_addr, ESKY150V2_TXID_SIZE);
+		packet[8]=0x41;								//Unknown
+		packet[9]=0x88;								//Unknown
+		packet[10]=0x41;							//Unknown
+		memset(&packet[11],0xAA,4);					//Unknown
+		memcpy(&packet[15],hopping_frequency,ESKY150V2_NFREQCHANNELS);	// hop table
+		//for(uint8_t i=0; i<40; i++)				// Does not seem to be needed
+		//	packet[i+85]=pgm_read_byte_near( &ESKY150V2_hop2[i] );
+		bind_counter=100;
+	}
+	else
+		NRF250K_SetTXAddr(rx_tx_addr, ESKY150V2_TXID_SIZE);
+	return 50000;
+}
+
+#endif

Multiprotocol/FrSkyX_cc2500.ino

@@ -302,10 +302,10 @@ uint16_t ReadFrSkyX()
 					uint8_t rssi_level=convert_channel_8b(CH16)>>1;		//CH16 0..127
 					if ( rssi > rssi_level && rssi < 128)				//test rssi level dynamically
 				#else
-					if ( rssi > 72 && rssi < 128)						//LBT and RSSI between -36 and -8.5 dBm
+					if ( rssi > 14 && rssi < 128)						// if RSSI above -65dBm (12=-70) => ETSI requirement
 				#endif
 				{
-					POWER_FLAG_off;										// Reduce to low power before transmitting
+					LBT_POWER_on;										// Reduce to low power before transmitting
 					debugln("Busy %d %d",hopping_frequency_no,rssi);
 				}
 			}

Multiprotocol/Multi.txt

@@ -66,3 +66,4 @@
 66,PROPEL,74-Z
 67,LR12,LR12,LR12_6ch
 68,Skyartec
+69,ESKYv2,150V2

Multiprotocol/Multi_Names.ino

@@ -51,6 +51,7 @@ const char STR_GW008[]		="GW008";
 const char STR_DM002[]		="DM002";
 const char STR_CABELL[]		="Cabell";
 const char STR_ESKY150[]	="Esky150";
+const char STR_ESKY150V2[]	="EskyV2";
 const char STR_H8_3D[]		="H8 3D";
 const char STR_CORONA[]		="Corona";
 const char STR_CFLIE[]		="CFlie";
@@ -121,6 +122,7 @@ const char STR_SUBTYPE_FLYZONE[] =    "\x05""FZ410";
 const char STR_SUBTYPE_FX816[] =      "\x03""P38";
 const char STR_SUBTYPE_XN297DUMP[] =  "\x07""250Kbps""1Mbps\0 ""2Mbps\0 ""Auto\0  ";
 const char STR_SUBTYPE_ESKY150[] =    "\x03""4CH""7CH";
+const char STR_SUBTYPE_ESKY150V2[] =  "\x05""150V2";
 const char STR_SUBTYPE_V911S[] =      "\x05""V911S""E119\0";
 const char STR_SUBTYPE_XK[] =         "\x04""X450""X420";
 const char STR_SUBTYPE_FRSKYR9[] =    "\x07""915MHz\0""868MHz\0""915 8ch""868 8ch";
@@ -195,6 +197,9 @@ const mm_protocol_definition multi_protocols[] = {
 	#if defined(ESKY150_NRF24L01_INO)
 		{PROTO_ESKY150,    STR_ESKY150,   2, STR_SUBTYPE_ESKY150,   OPTION_NONE    },
 	#endif
+	#if defined(ESKY150V2_CC2500_INO)
+		{PROTO_ESKY150V2,  STR_ESKY150V2, 1, STR_SUBTYPE_ESKY150V2, OPTION_RFTUNE  },
+	#endif
 	#if defined(FLYSKY_A7105_INO)
 		{PROTO_FLYSKY,     STR_FLYSKY,    5, STR_SUBTYPE_FLYSKY,    OPTION_NONE    },
 	#endif
@@ -307,7 +312,7 @@ const mm_protocol_definition multi_protocols[] = {
 		{PROTO_SHENQI,     STR_SHENQI,    0, NO_SUBTYPE,            OPTION_NONE    },
 	#endif
 	#if defined(SKYARTEC_CC2500_INO)
-		{PROTO_SKYARTEC,   STR_SKYARTEC,  0, NO_SUBTYPE,            OPTION_NONE    },
+		{PROTO_SKYARTEC,   STR_SKYARTEC,  0, NO_SUBTYPE,            OPTION_RFTUNE  },
 	#endif
 	#if defined(SLT_NRF24L01_INO)
 		{PROTO_SLT,        STR_SLT,       5, STR_SUBTYPE_SLT,       OPTION_RFTUNE  },

Multiprotocol/Multiprotocol.h

@@ -19,7 +19,7 @@
 #define VERSION_MAJOR		1
 #define VERSION_MINOR		3
 #define VERSION_REVISION	0
-#define VERSION_PATCH_LEVEL	91
+#define VERSION_PATCH_LEVEL	95
 
 //******************
 // Protocols
@@ -95,6 +95,7 @@ enum PROTOCOLS
 	PROTO_PROPEL	= 66,	// =>NRF24L01
 	PROTO_FRSKYL	= 67,	// =>CC2500
 	PROTO_SKYARTEC	= 68,	// =>CC2500
+	PROTO_ESKY150V2	= 69,	// =>CC2500+NRF24L01
 };
 
 enum Flysky
@@ -397,7 +398,7 @@ enum MultiPacketTypes
 //***  Tests  ***
 //***************
 #define IS_FAILSAFE_PROTOCOL	( (protocol==PROTO_HISKY && sub_protocol==HK310) || protocol==PROTO_AFHDS2A || protocol==PROTO_DEVO || protocol==PROTO_SFHSS || protocol==PROTO_WK2x01 || protocol== PROTO_HOTT || protocol==PROTO_FRSKYX || protocol==PROTO_FRSKYX2 )
-#define IS_CHMAP_PROTOCOL		( (protocol==PROTO_HISKY && sub_protocol==HK310) || protocol==PROTO_AFHDS2A || protocol==PROTO_DEVO || protocol==PROTO_SFHSS || protocol==PROTO_WK2x01 || protocol== PROTO_DSM || protocol==PROTO_SLT || protocol==PROTO_FLYSKY || protocol==PROTO_ESKY || protocol==PROTO_J6PRO || protocol==PROTO_PELIKAN  || protocol==PROTO_SKYARTEC )
+#define IS_CHMAP_PROTOCOL		( (protocol==PROTO_HISKY && sub_protocol==HK310) || protocol==PROTO_AFHDS2A || protocol==PROTO_DEVO || protocol==PROTO_SFHSS || protocol==PROTO_WK2x01 || protocol== PROTO_DSM || protocol==PROTO_SLT || protocol==PROTO_FLYSKY || protocol==PROTO_ESKY || protocol==PROTO_J6PRO || protocol==PROTO_PELIKAN  || protocol==PROTO_SKYARTEC || protocol==PROTO_ESKY150V2 )
 
 //***************
 //***  Flags  ***
@@ -487,6 +488,11 @@ enum MultiPacketTypes
 #define DISABLE_TELEM_on		protocol_flags3 |= _BV(3)
 #define IS_DISABLE_TELEM_on		( ( protocol_flags3 & _BV(3) ) !=0 )
 #define IS_DISABLE_TELEM_off	( ( protocol_flags3 & _BV(3) ) ==0 )
+//LBT power
+#define LBT_POWER_off		protocol_flags3 &= ~_BV(7)
+#define LBT_POWER_on		protocol_flags3 |= _BV(7)
+#define IS_LBT_POWER_on		( ( protocol_flags3 & _BV(7) ) !=0 )
+#define IS_LBT_POWER_off	( ( protocol_flags3 & _BV(7) ) ==0 )
 
 
 // Failsafe
@@ -611,6 +617,7 @@ enum CC2500_POWER
 	CC2500_POWER_17 = 0xFF	//  +1dbm
 };
 #define CC2500_HIGH_POWER	CC2500_POWER_17
+#define CC2500_LBT_POWER	CC2500_POWER_14
 #define CC2500_LOW_POWER	CC2500_POWER_13
 #define CC2500_RANGE_POWER	CC2500_POWER_1
 #define CC2500_BIND_POWER	CC2500_POWER_1
@@ -754,6 +761,7 @@ Serial: 100000 Baud 8e2      _ xxxx xxxx p --
 				PROPEL		66
 				FRSKYL		67
 				SKYARTEC	68
+				ESKY150V2	69
    BindBit=>		0x80	1=Bind/0=No
    AutoBindBit=>	0x40	1=Yes /0=No
    RangeCheck=>		0x20	1=Yes /0=No

Multiprotocol/Multiprotocol.ino

@@ -75,7 +75,11 @@ uint32_t blink=0,last_signal=0;
 //
 uint16_t counter;
 uint8_t  channel;
+#ifdef ESKY150V2_CC2500_INO
+	uint8_t  packet[150];
+#else
 	uint8_t  packet[50];
+#endif
 
 #define NUM_CHN 16
 // Servo data
@@ -97,7 +101,7 @@ uint16_t packet_period;
 uint8_t  packet_count;
 uint8_t  packet_sent;
 uint8_t  packet_length;
-#ifdef HOTT_CC2500_INO
+#if defined(HOTT_CC2500_INO) || defined(ESKY150V2_CC2500_INO)
 	uint8_t  hopping_frequency[75];
 #else
 	uint8_t  hopping_frequency[50];
@@ -1211,6 +1215,14 @@ static void protocol_init()
 						remote_callback = FrSky_Rx_callback;
 						break;
 				#endif
+				#if defined(ESKY150V2_CC2500_INO)
+					case PROTO_ESKY150V2:
+						PE1_off;
+						PE2_on;	//antenna RF2
+						next_callback = initESKY150V2();
+						remote_callback = ESKY150V2_callback;
+						break;
+				#endif
 			#endif
 			#ifdef CYRF6936_INSTALLED
 				#if defined(DSM_CYRF6936_INO)
@@ -2183,6 +2195,51 @@ static uint32_t random_id(uint16_t address, uint8_t create_new)
 	#endif
 }
 
+// Generate frequency hopping sequence in the range [02..77]
+static void __attribute__((unused)) calc_fh_channels(uint8_t num_ch)
+{
+	uint8_t idx = 0;
+	uint32_t rnd = MProtocol_id;
+	uint8_t max=(num_ch/3)+2;
+	
+	while (idx < num_ch)
+	{
+		uint8_t i;
+		uint8_t count_2_26 = 0, count_27_50 = 0, count_51_74 = 0;
+
+		rnd = rnd * 0x0019660D + 0x3C6EF35F; // Randomization
+		// Use least-significant byte. 73 is prime, so channels 76..77 are unused
+		uint8_t next_ch = ((rnd >> 8) % 73) + 2;
+		// Keep a distance of 5 between consecutive channels
+		if (idx !=0)
+		{
+			if(hopping_frequency[idx-1]>next_ch)
+			{
+				if(hopping_frequency[idx-1]-next_ch<5)
+					continue;
+			}
+			else
+				if(next_ch-hopping_frequency[idx-1]<5)
+					continue;
+		}
+		// Check that it's not duplicated and spread uniformly
+		for (i = 0; i < idx; i++) {
+			if(hopping_frequency[i] == next_ch)
+				break;
+			if(hopping_frequency[i] <= 26)
+				count_2_26++;
+			else if (hopping_frequency[i] <= 50)
+				count_27_50++;
+			else
+				count_51_74++;
+		}
+		if (i != idx)
+			continue;
+		if ( (next_ch <= 26 && count_2_26 < max) || (next_ch >= 27 && next_ch <= 50 && count_27_50 < max) || (next_ch >= 51 && count_51_74 < max) )
+			hopping_frequency[idx++] = next_ch;//find hopping frequency
+	}
+}
+
 /**************************/
 /**************************/
 /**  Interrupt routines  **/

Multiprotocol/NRF250K_EMU.ino

@@ -383,7 +383,11 @@ static void __attribute__((unused)) NRF250K_WritePayload(uint8_t* msg, uint8_t l
 	}
 	//CC2500
 	#ifdef CC2500_INSTALLED
+		#if defined(ESKY150V2_CC2500_INO)
+			uint8_t buf[158];
+		#else
 			uint8_t buf[35];
+		#endif
 		uint8_t last = 0;
 		uint8_t i;
 
@@ -417,10 +421,40 @@ static void __attribute__((unused)) NRF250K_WritePayload(uint8_t* msg, uint8_t l
 		CC2500_Strobe(CC2500_SFTX);
 		// packet length
 		CC2500_WriteReg(CC2500_3F_TXFIFO, last);
-		// nrf packet
-		CC2500_WriteRegisterMulti(CC2500_3F_TXFIFO, buf, last);
-		// transmit
+		// transmit nrf packet
+		uint8_t *buff=buf;
+		uint8_t status;
+		if(last>63)
+		{
+			CC2500_WriteRegisterMulti(CC2500_3F_TXFIFO, buff, 63);
 			CC2500_Strobe(CC2500_STX);
+			last-=63;
+			buff+=63;
+			while(last)
+			{//Loop until all the data is sent
+				do
+				{// Wait for the FIFO to become available
+					status=CC2500_ReadReg(CC2500_3A_TXBYTES | CC2500_READ_BURST);
+				}
+				while((status&0x7F)>31 && (status&0x80)==0);
+				if(last>31)
+				{//Send 31 bytes
+					CC2500_WriteRegisterMulti(CC2500_3F_TXFIFO, buff, 31);
+					last-=31;
+					buff+=31;
+				}
+				else
+				{//Send last bytes
+					CC2500_WriteRegisterMulti(CC2500_3F_TXFIFO, buff, last);
+					last=0;
+				}
+			}
+		}
+		else
+		{//Send packet
+			CC2500_WriteRegisterMulti(CC2500_3F_TXFIFO, buff, last);
+			CC2500_Strobe(CC2500_STX);
+		}
 	#endif
 }
 

Multiprotocol/Skyartec_cc2500.ino

@@ -19,7 +19,6 @@
 
 //#define SKYARTEC_FORCE_ID
 
-#define SKYARTEC_BIND_CHANNEL		0x7D
 #define SKYARTEC_COARSE				0x00
 #define SKYARTEC_TX_ADDR			rx_tx_addr[1]
 #define SKYARTEC_TX_CHANNEL			rx_tx_addr[0]
@@ -41,7 +40,7 @@ enum {
 
 const PROGMEM uint8_t SKYARTEC_init_values[] = {
   /* 04 */ 0x13, 0x18, 0xFF, 0x05,
-  /* 08 */ 0x05, 0x43, SKYARTEC_BIND_CHANNEL, 0x09, 0x00, 0x5D, 0x93, 0xB1 + SKYARTEC_COARSE,
+  /* 08 */ 0x05, 0x43, 0xCD, 0x09, 0x00, 0x5D, 0x93, 0xB1 + SKYARTEC_COARSE,
   /* 10 */ 0x2D, 0x20, 0x73, 0x22, 0xF8, 0x50, 0x07, 0x30,
   /* 18 */ 0x18, 0x1D, 0x1C, 0xC7, 0x00, 0xB2, 0x87, 0x6B,
   /* 20 */ 0xF8, 0xB6, 0x10, 0xEA, 0x0A, 0x00, 0x11, 0x41,
@@ -60,6 +59,10 @@ static void __attribute__((unused)) SKYARTEC_rf_init()
 
 	CC2500_SetTxRxMode(TX_EN);
 	CC2500_SetPower();
+	CC2500_Strobe(CC2500_SFTX);
+	CC2500_Strobe(CC2500_SFRX);
+	CC2500_Strobe(CC2500_SXOFF);
+	CC2500_Strobe(CC2500_SIDLE);
 }
 
 static void __attribute__((unused)) SKYARTEC_send_data_packet()
@@ -78,13 +81,12 @@ static void __attribute__((unused)) SKYARTEC_send_data_packet()
 	}
 	//checks
     uint8_t xor1 = 0;
-    for(uint8_t i = 3; i <= 16; i++)
-        xor1 ^= packet[i];
-    packet[17] = xor1;
-    uint8_t xor2 = 0;
     for(uint8_t i = 3; i <= 14; i++)
-        xor2 ^= packet[i];
-    packet[18] = xor2;
+        xor1 ^= packet[i];
+    packet[18] = xor1;
+    xor1 ^= packet[15];
+    xor1 ^= packet[16];
+    packet[17] = xor1;
     packet[19] = packet[3] + packet[5] + packet[7] + packet[9] + packet[11] + packet[13];
 
 	CC2500_WriteReg(CC2500_04_SYNC1,	rx_tx_addr[3]);
@@ -101,7 +103,10 @@ static void __attribute__((unused)) SKYARTEC_send_bind_packet()
 	packet[1] = 0x7d;
 	packet[2] = 0x01;
 	packet[3] = 0x01;
-	memcpy(&packet[4], rx_tx_addr, 4);
+	packet[4] = rx_tx_addr[0];
+	packet[5] = rx_tx_addr[1];
+	packet[6] = rx_tx_addr[2];
+	packet[7] = rx_tx_addr[3];
 	packet[8] = 0x00;
 	packet[9] = 0x00;
 	packet[10] = SKYARTEC_TX_ADDR;
@@ -112,7 +117,7 @@ static void __attribute__((unused)) SKYARTEC_send_bind_packet()
 	CC2500_WriteReg(CC2500_04_SYNC1,	0x7d);
 	CC2500_WriteReg(CC2500_05_SYNC0,	0x7d);
 	CC2500_WriteReg(CC2500_09_ADDR,		0x7d);
-	CC2500_WriteReg(CC2500_0A_CHANNR,	SKYARTEC_BIND_CHANNEL);
+	CC2500_WriteReg(CC2500_0A_CHANNR,	0x7d);
 	CC2500_WriteData(packet, 12);
 }
 
@@ -158,7 +163,7 @@ uint16_t initSKYARTEC()
 {
     SKYARTEC_rf_init();
 
-	#ifdef SKYARTEC_FORCEID
+	#ifdef SKYARTEC_FORCE_ID
 		memset(rx_tx_addr,0x00,4);
 	#endif
 	if(rx_tx_addr[0]==0) rx_tx_addr[0]=0xB2;

Multiprotocol/Validate.h

@@ -212,6 +212,7 @@
 #endif
 #ifndef CC2500_INSTALLED
 	#undef	CORONA_CC2500_INO
+	#undef	ESKY150V2_CC2500_INO
 	#undef	FRSKYD_CC2500_INO
 	#undef	FRSKYL_CC2500_INO
 	#undef	FRSKYV_CC2500_INO
@@ -237,6 +238,7 @@
 	#undef	E01X_NRF24L01_INO
 	#undef	ESKY_NRF24L01_INO
 	#undef	ESKY150_NRF24L01_INO
+	#undef	ESKY150V2_CC2500_INO	// Use both CC2500 and NRF code
 	#undef	FQ777_NRF24L01_INO
 	#undef	FX816_NRF24L01_INO
 	#undef	FY326_NRF24L01_INO

Multiprotocol/_Config.h

@@ -177,6 +177,7 @@
 
 //The protocols below need a CC2500 to be installed
 #define	CORONA_CC2500_INO
+#define	ESKY150V2_CC2500_INO	//Need both CC2500 and NRF
 #define	FRSKYL_CC2500_INO
 #define	FRSKYD_CC2500_INO
 #define	FRSKYV_CC2500_INO
@@ -552,6 +553,8 @@ const PPM_Parameters PPM_prot[14*NBR_BANKS]=	{
 	PROTO_ESKY150
 		ESKY150_4CH
 		ESKY150_7CH
+	PROTO_ESKY150V2
+		NONE
 	PROTO_FLYSKY
 		Flysky
 		V9X9

Protocols_Details.md

@@ -82,6 +82,7 @@ CFlie|38|CFlie||||||||NRF24L01|
 [E01X](Protocols_Details.md#E01X---45)|45|E012|E015|E016H||||||NRF24L01|XN297/HS6200
 [ESky](Protocols_Details.md#ESKY---16)|16|ESky|Std|ET4||||||NRF24L01|
 [ESky150](Protocols_Details.md#ESKY150---35)|35|ESKY150||||||||NRF24L01|
+[ESky150V2](Protocols_Details.md#ESKY150V2---69)|69|||||||||CC2500|NRF24L01
 [Flysky](Protocols_Details.md#FLYSKY---1)|1|Flysky|V9x9|V6x6|V912|CX20||||A7105|
 [Flysky AFHDS2A](Protocols_Details.md#FLYSKY-AFHDS2A---28)|28|PWM_IBUS|PPM_IBUS|PWM_SBUS|PPM_SBUS|||||A7105|
 [Flysky AFHDS2A RX](Protocols_Details.md#FLYSKY-AFHDS2A-RX---56)|56|||||||||A7105|
@@ -936,6 +937,17 @@ A|E|T|R|FMODE|AUX6|AUX7
 
 FMODE and AUX7 have 4 positions: -100%..-50%=>0, -50%..5%=>1, 5%..50%=>2, 50%..100%=>3
 
+## ESKY150V2 - *69*
+ESky protocol for small models: 150 V2, F150 V2, Blade 70s(?)
+
+Notes:
+ - RX output will match the eSky standard TAER independently of the input configuration AETR, RETA... unless on OpenTX 2.3.3+ you use the "Disable channel mapping" feature on the GUI.
+ - To run this protocol you need both CC2500 and NRF24L01 to be enabled for code reasons, only the CC2500 is really used.
+ 
+CH1|CH2|CH3|CH4|CH5 |CH6 |CH7 |CH8 |CH9 |CH10|CH11|CH12|CH13|CH14|CH15|CH16
+---|---|---|---|----|----|----|----|----|----|----|----|----|----|----|----
+A|E|T|R|CH5 |CH6 |CH7 |CH8 |CH9 |CH10|CH11|CH12|CH13|CH14|CH15|CH16
+
 ## FX816 - *58*
 Model: FEI XIONG FX816 P38