SLT2 trial 3

Lua_scripts/MultiChan.txt

@@ -232,3 +232,4 @@
 102,1,JIABAILE,Gyro,0,Speed,Light,Flash,ST_Tr
 103,0,H36,Std,1,Flip,HLess,RTH
 104,0,KAMTOM,Std,0,ST_Tr,TH_Tr,TH_DR
+105,0,Shenqi2,Std,1

Multiprotocol/Kamtom_nrf24l01.ino

@@ -136,10 +136,13 @@ uint16_t KAMTOM_callback()
 				{
 					BIND_DONE;
 					if(packet_in[0] == 0xA0 && packet_in[14] == rx_tx_addr[2] && packet_in[15] == rx_tx_addr[3])
-					{
+					{//Good packet with our TXID
 						rx_tx_addr[0] = packet_in[9];
 						rx_tx_addr[1] = packet_in[10];
-						//if(packet_in[1] == 0x03)		// low voltage
+						#ifdef KAMTOM_HUB_TELEMETRY
+							v_lipo1 = packet_in[1] == 0x03 ? 0x00:0xFF;		// low voltage
+							telemetry_link = 1;
+						#endif
 					}
 					#if 0
 						for(uint8_t i=0; i < KAMTOM_PAYLOAD_SIZE; i++)
@@ -174,6 +177,9 @@ void KAMTOM_init()
 	bind_counter = KAMTOM_BIND_COUNT;
 	phase = KAMTOM_DATA;
 	hopping_frequency_no = 0;
+	#ifdef KAMTOM_HUB_TELEMETRY
+		RX_RSSI = 100;		// Dummy value
+	#endif
 }
 
 #endif

Multiprotocol/Multi.txt

@@ -99,4 +99,5 @@
 100,YuXiang
 102,JIABAILE,STD,GYRO
 103,H36
-104,KAMTOM
+104,KAMTOM
+105,Shenqi2

Multiprotocol/Multi_Protos.ino

@@ -36,6 +36,7 @@ const char STR_MT99XX[]		="MT99XX";
 const char STR_MT99XX2[]	="MT99XX2";
 const char STR_MJXQ[]		="MJXq";
 const char STR_SHENQI[]		="Shenqi";
+const char STR_SHENQI2[]	="Shenqi2";
 const char STR_FY326[]		="FY326";
 const char STR_FUTABA[]		="Futaba";
 const char STR_J6PRO[]		="J6 Pro";
@@ -476,6 +477,9 @@ const mm_protocol_definition multi_protocols[] = {
 	#if defined(SHENQI_NRF24L01_INO)
 		{PROTO_SHENQI,     STR_SHENQI,    NO_SUBTYPE,            0, OPTION_NONE,    0, 0, SW_NRF,    SHENQI_init,     SHENQI_callback     },
 	#endif
+	#if defined(SHENQI2_NRF24L01_INO)
+		{PROTO_SHENQI2,    STR_SHENQI2,   NO_SUBTYPE,            0, OPTION_NONE,    0, 0, SW_NRF,    SHENQI2_init,     SHENQI2_callback   },
+	#endif
 	#if defined(SKYARTEC_CC2500_INO)
 		{PROTO_SKYARTEC,   STR_SKYARTEC,  NO_SUBTYPE,            0, OPTION_RFTUNE,  0, 1, SW_CC2500, SKYARTEC_init,   SKYARTEC_callback   },
 	#endif

Multiprotocol/Multiprotocol.h

@@ -19,7 +19,7 @@
 #define VERSION_MAJOR		1
 #define VERSION_MINOR		3
 #define VERSION_REVISION	4
-#define VERSION_PATCH_LEVEL	34
+#define VERSION_PATCH_LEVEL	38
 
 #define MODE_SERIAL 0
 
@@ -132,6 +132,7 @@ enum PROTOCOLS
 	PROTO_JIABAILE	= 102,	// =>NRF24L01
 	PROTO_H36		= 103,	// =>NRF24L01
 	PROTO_KAMTOM	= 104,	// =>NRF24L01
+	PROTO_SHENQI2	= 105,	// =>NRF24L01
 	
 	PROTO_NANORF	= 126,	// =>NRF24L01
 	PROTO_TEST		= 127,	// =>CC2500

Multiprotocol/SHENQI2_nrf24l01.ino

@@ -0,0 +1,232 @@
+/*
+ This project is free software: you can redistribute it and/or modify
+ it under the terms of the GNU General Public License as published by
+ the Free Software Foundation, either version 3 of the License, or
+ (at your option) any later version.
+
+Multiprotocol is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ GNU General Public License for more details.
+
+ You should have received a copy of the GNU General Public License
+ along with Multiprotocol.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#if defined(SHENQI2_NRF24L01_INO)
+
+#include "iface_xn297.h"
+
+//#define FORCE_SHENQI2_ORIGINAL_ID
+
+#define SHENQI2_PAYLOAD_SIZE		8
+#define SHENQI2_RF_NUM_CHANNELS		16
+#define SHENQI2_BIND_COUNT			2000
+#define SHENQI2_WRITE_TIME			650
+#define SHENQI2_BIND_CHANNEL		44
+#define SHENQI2_PACKET_PERIOD		8210
+
+
+enum {
+	SHENQI2_BIND = 0,
+	SHENQI2_BIND_RX,
+	SHENQI2_DATA,
+};
+
+static void __attribute__((unused)) SHENQI2_send_packet()
+{
+	if(bind_counter)
+	{
+		bind_counter--;
+		if(!bind_counter)
+			BIND_DONE;
+	}
+
+	memset(packet, 0x00, SHENQI2_PAYLOAD_SIZE);
+
+	packet_count &= 0x0F;
+	packet[0] = packet_count;
+	
+	memcpy(&packet[1],rx_tx_addr,5);
+
+	if(IS_BIND_DONE)
+	{//Normal
+		uint8_t val = convert_channel_8b(CH2);
+		if(val < 0x70)
+			val = 0x30;
+		else if(val < 0x80)
+			val = 0x00;
+		else
+		{
+			val &= 0x7F;
+			val >>= 2;
+		}
+		if(Channel_data[CH1] > 1024+50)
+			val |= 0x40;
+		else if(Channel_data[CH1] < 1024-50)
+			val |= 0x80;
+		packet[6] = val;
+		//packet[7] = 0x00;		// ??
+	}
+	else
+		packet[0] |= 0x30;
+
+	// Send
+	XN297_SetPower();
+	XN297_SetTxRxMode(TX_EN);
+	XN297_WriteEnhancedPayload(packet, SHENQI2_PAYLOAD_SIZE, false);
+	#ifdef DEBUG_SERIAL
+		for(uint8_t i=0; i < SHENQI2_PAYLOAD_SIZE; i++)
+			debug("%02X ", packet[i]);
+		debugln();
+	#endif
+}
+
+static void __attribute__((unused)) SHENQI2_initialize_txid()
+{
+	#ifdef FORCE_SHENQI2_ORIGINAL_ID
+		//TXID
+		rx_tx_addr[0] = 0x51;
+		rx_tx_addr[1] = 0x70;
+		rx_tx_addr[2] = 0x02;
+		//RXID
+		rx_tx_addr[3] = 0x46;
+		rx_tx_addr[4] = 0xBE;
+	#endif
+	rx_tx_addr[3] = 0x00;
+	rx_tx_addr[4] = 0x00;
+	//Freq
+	memcpy(hopping_frequency,(uint8_t*)"\x05\x09\x0E\x0F\x17\x1C\x21\x27\x2A\x2C\x33\x39\x3D\x42\x48\x4C",16);
+}
+
+static void __attribute__((unused)) SHENQI2_RF_init()
+{
+	XN297_Configure(XN297_CRCEN, XN297_SCRAMBLED, XN297_1M);
+	//Address
+	XN297_SetTXAddr((uint8_t*)"\x74\xD1\x3A\xF5\x6C", 5);
+	XN297_SetRXAddr((uint8_t*)"\x74\xD1\x3A\xF5\x6C", SHENQI2_PAYLOAD_SIZE);
+	XN297_RFChannel(SHENQI2_BIND_CHANNEL);
+}
+
+uint16_t SHENQI2_callback()
+{
+	static bool rx=false;
+	
+	switch(phase)
+	{
+		case SHENQI2_BIND:
+			rx = XN297_IsRX();
+			XN297_SetTxRxMode(TXRX_OFF);
+			SHENQI2_send_packet();
+			packet_count++;
+			if(rx)
+			{
+				uint8_t val=XN297_ReadEnhancedPayload(packet_in, SHENQI2_PAYLOAD_SIZE);
+				if(val == SHENQI2_PAYLOAD_SIZE)
+				{
+					if(memcmp(rx_tx_addr, packet_in, 3) == 0)
+					{//Good packet with our TXID
+						BIND_DONE;
+						rx_tx_addr[3] = packet_in[3];
+						rx_tx_addr[4] = packet_in[4];
+						packet_count = 0;
+						phase = SHENQI2_DATA;
+					}
+					#ifdef DEBUG_SERIAL
+						for(uint8_t i=0; i < SHENQI2_PAYLOAD_SIZE; i++)
+							debug(" %02X", packet_in[i]);
+						debugln();
+					#endif
+				}
+			}
+			phase++;
+			return SHENQI2_WRITE_TIME;
+		case SHENQI2_BIND_RX:
+			XN297_SetTxRxMode(TXRX_OFF);
+			XN297_SetTxRxMode(RX_EN);
+			phase = SHENQI2_BIND;
+			return SHENQI2_PACKET_PERIOD - SHENQI2_WRITE_TIME;
+		default: //SHENQI2_DATA
+			//Since I don't know the order of the channels, I'm hopping on all the channels quickly
+			//Refresh rate from the motorcycle perspective is 32ms instead of 8ms...
+			XN297_Hopping(hopping_frequency_no);
+			hopping_frequency_no++;
+			hopping_frequency_no &= 0x0F;
+			SHENQI2_send_packet();
+			if(hopping_frequency_no%4 == 0)
+				packet_count++;
+			return SHENQI2_PACKET_PERIOD/4;
+	}
+	return 0;
+}
+
+void SHENQI2_init()
+{
+	BIND_IN_PROGRESS;
+	SHENQI2_initialize_txid();
+	SHENQI2_RF_init();
+
+	bind_counter = SHENQI2_BIND_COUNT;
+	phase = SHENQI2_BIND;
+	hopping_frequency_no = 0;
+}
+
+#endif
+/*
+XN297 1Mb Enhanced,Acked,Scrambled
+
+Bind
+---
+RX on channel: 44, Time:  2890us P: 34 51 70 02 00 00 00 00
+RX on channel: 44, Time:  1780us P: 34 51 70 02 00 00 00 00
+RX on channel: 44, Time:  1773us P: 34 51 70 02 00 00 00 00
+RX on channel: 44, Time:  1772us P: 34 51 70 02 00 00 00 00
+RX on channel: 44, Time:  2889us P: 35 51 70 02 00 00 00 00
+RX on channel: 44, Time:  1769us P: 35 51 70 02 00 00 00 00
+RX on channel: 44, Time:  1774us P: 35 51 70 02 00 00 00 00
+RX on channel: 44, Time:  1771us P: 35 51 70 02 00 00 00 00
+RX on channel: 44, Time:  2894us P: 36 51 70 02 00 00 00 00
+
+A= 74 D1 3A F5 6C
+RF:44
+Timing: 1772µs between the same 4 packets, 2892µs to the next packet, 8208µs between 2 packets
+Request ack, if no ack repeat the packet 4 times
+
+P[0] = counter 00..0F | 30 bind
+P[1] = TXID[0]
+P[2] = TXID[1]
+P[3] = TXID[2]
+P[4] = RXID[0]
+P[5] = RXID[1]
+P[6] = TH 00..1F, Break 30, 40 ST_right, 80 ST_left
+P[7] = 00?
+
+Answer from motorcycle:
+P: 51 70 02 46 BE 00 00 00
+P[0] = TXID[0]
+P[1] = TXID[1]
+P[2] = TXID[2]
+P[3] = RXID[0]
+P[4] = RXID[1]
+P[5] = 00
+P[6] = 00
+P[7] = 00
+
+Normal packets
+---
+A= 74 D1 3A F5 6C
+RF:5,9,14,15,23,28,33,39,42,44,51,57,61,66,72,76
+RF:\x05\x09\x0E\x0F\x17\x1C\x21\x27\x2A\x2C\x33\x39\x3D\x42\x48\x4C
+- order of the channels is unknown and vary over time
+- send 16 times on each channel and switch (counter 00..0F)
+Timing:1772µs between the same 4 packets, 2892µs to the next packet, 8208µs between 2 packets
+Timing:8208 between packets if acked
+P: 00 51 70 02 46 BE 00 00
+P[0] = counter 00..0F
+P[1] = TXID[0]
+P[2] = TXID[1]
+P[3] = TXID[2]
+P[4] = RXID[0]
+P[5] = RXID[1]
+P[6] = TH 00..1F, Break 30, 40 ST_right, 80 ST_left
+P[7] = 00?
+*/

Multiprotocol/SLT_ccnrf.ino

@@ -19,6 +19,7 @@
 #include "iface_nrf250k.h"
 
 //#define SLT_Q200_FORCE_ID
+#define SLT_V1_4_FORCE_ID
 
 // For code readability
 #define SLT_PAYLOADSIZE_V1		7
@@ -94,10 +95,10 @@ static void __attribute__((unused)) SLT_set_freq(void)
 				}
 		}
 	}
-	#if 0
+	#ifdef DEBUG_SERIAL
 		debug("CH:");
 		for (uint8_t i = 0; i < SLT_NFREQCHANNELS; ++i)
-			debug(" %02X", hopping_frequency[i]);
+			debug(" %02X(%d)", hopping_frequency[i], hopping_frequency[i]);
 		debugln();
 	#endif
 	
@@ -289,6 +290,13 @@ void SLT_init()
 		/*	rx_tx_addr[0]=0x01;rx_tx_addr[1]=0x02;rx_tx_addr[2]=0x0B;rx_tx_addr[3]=0x57;*/
 		#endif
 	}
+	#ifdef SLT_V1_4_FORCE_ID
+		if(sub_protocol==SLT_V1_4)
+		{
+			memcpy(rx_tx_addr,"\xF4\x71\x8D\x01",SLT_TXID_SIZE);
+			rx_tx_addr[2] += RX_num;
+		}
+	#endif
 	SLT_RF_init();
 	SLT_set_freq();
 	phase = SLT_BUILD;
@@ -305,10 +313,6 @@ void SLT_init()
 		#ifdef MULTI_SYNC
 			packet_period = 18000;								//18ms
 		#endif
-		//Test IDs
-		MProtocol_id = MProtocol_id_master ^ (1<<RX_num);
-		set_rx_tx_addr(MProtocol_id);
-		debugln("Try ID: %lx", MProtocol_id);
 	}
 	else //V2
 	{

Multiprotocol/Validate.h

@@ -337,6 +337,7 @@
 	#undef	REALACC_NRF24L01_INO
 	#undef	SGF22_NRF24L01_INO
 	#undef	SHENQI_NRF24L01_INO
+	#undef	SHENQI2_NRF24L01_INO
 	#undef	SYMAX_NRF24L01_INO
 	#undef	V2X2_NRF24L01_INO
 	#undef	V761_NRF24L01_INO
@@ -392,6 +393,7 @@
 	#undef	KYOSHO3_CYRF6936_INO
 	#undef	MOULDKG_NRF24L01_INO
 	#undef	SHENQI_NRF24L01_INO
+	#undef	SHENQI2_NRF24L01_INO
 	#undef	JIABAILE_NRF24L01_INO
 	#undef	UDIRC_CCNRF_INO
 	#undef	KAMTOM_NRF24L01_INO
@@ -490,6 +492,7 @@
 	#undef PROPEL_HUB_TELEMETRY
 	#undef OMP_HUB_TELEMETRY
 	#undef V761_HUB_TELEMETRY
+	#undef KAMTOM_HUB_TELEMETRY
 	#undef YUXIANG_HUB_TELEMETRY
 	#undef RLINK_HUB_TELEMETRY
 	#undef DSM_RX_CYRF6936_INO
@@ -529,6 +532,9 @@
 	#if not defined(V761_NRF24L01_INO)
 		#undef V761_HUB_TELEMETRY
 	#endif
+	#if not defined(KAMTOM_NRF24L01_INO)
+		#undef KAMTOM_HUB_TELEMETRY
+	#endif
 	#if not defined(YUXIANG_NRF24L01_INO)
 		#undef YUXIANG_HUB_TELEMETRY
 	#endif
@@ -589,7 +595,7 @@
 		//protocols using FRSKYD user frames
 		#undef HUB_TELEMETRY 
 	#endif
-	#if not defined(HOTT_FW_TELEMETRY) && not defined(DSM_TELEMETRY) && not defined(SPORT_TELEMETRY) && not defined(HUB_TELEMETRY) && not defined(HUBSAN_HUB_TELEMETRY) && not defined(BUGS_HUB_TELEMETRY) && not defined(NCC1701_HUB_TELEMETRY) && not defined(BAYANG_HUB_TELEMETRY) && not defined(CABELL_HUB_TELEMETRY) && not defined(RLINK_HUB_TELEMETRY) && not defined(AFHDS2A_HUB_TELEMETRY) && not defined(AFHDS2A_FW_TELEMETRY) && not defined(MULTI_TELEMETRY) && not defined(MULTI_STATUS) && not defined(HITEC_HUB_TELEMETRY) && not defined(HITEC_FW_TELEMETRY) && not defined(SCANNER_TELEMETRY) && not defined(FRSKY_RX_TELEMETRY) && not defined(AFHDS2A_RX_TELEMETRY) && not defined(BAYANG_RX_TELEMETRY) && not defined(DEVO_HUB_TELEMETRY) && not defined(PROPEL_HUB_TELEMETRY) && not defined(OMP_HUB_TELEMETRY) && not defined(V761_HUB_TELEMETRY) && not defined(YUXIANG_HUB_TELEMETRY) && not defined(WFLY2_HUB_TELEMETRY) && not defined(LOLI_HUB_TELEMETRY) && not defined(MLINK_HUB_TELEMETRY) && not defined(MLINK_FW_TELEMETRY) && not defined(MT99XX_HUB_TELEMETRY) && not defined(MULTI_CONFIG_INO)
+	#if not defined(HOTT_FW_TELEMETRY) && not defined(DSM_TELEMETRY) && not defined(SPORT_TELEMETRY) && not defined(HUB_TELEMETRY) && not defined(HUBSAN_HUB_TELEMETRY) && not defined(BUGS_HUB_TELEMETRY) && not defined(NCC1701_HUB_TELEMETRY) && not defined(BAYANG_HUB_TELEMETRY) && not defined(CABELL_HUB_TELEMETRY) && not defined(RLINK_HUB_TELEMETRY) && not defined(AFHDS2A_HUB_TELEMETRY) && not defined(AFHDS2A_FW_TELEMETRY) && not defined(MULTI_TELEMETRY) && not defined(MULTI_STATUS) && not defined(HITEC_HUB_TELEMETRY) && not defined(HITEC_FW_TELEMETRY) && not defined(SCANNER_TELEMETRY) && not defined(FRSKY_RX_TELEMETRY) && not defined(AFHDS2A_RX_TELEMETRY) && not defined(BAYANG_RX_TELEMETRY) && not defined(DEVO_HUB_TELEMETRY) && not defined(PROPEL_HUB_TELEMETRY) && not defined(OMP_HUB_TELEMETRY) && not defined(V761_HUB_TELEMETRY) && not defined(KAMTOM_HUB_TELEMETRY) && not defined(YUXIANG_HUB_TELEMETRY) && not defined(WFLY2_HUB_TELEMETRY) && not defined(LOLI_HUB_TELEMETRY) && not defined(MLINK_HUB_TELEMETRY) && not defined(MLINK_FW_TELEMETRY) && not defined(MT99XX_HUB_TELEMETRY) && not defined(MULTI_CONFIG_INO)
 		#undef TELEMETRY
 		#undef INVERT_TELEMETRY
 		#undef MULTI_TELEMETRY

Multiprotocol/XK2_ccnrf.ino

@@ -200,7 +200,7 @@ uint16_t XK2_callback()
 			}
 			return 1000;
 		case XK2_DATA_PREP:
-			crc8=eeprom_read_byte((EE_ADDR)(XK2_EEPROM_OFFSET+RX_num));
+			crc8 = eeprom_read_byte((EE_ADDR)(XK2_EEPROM_OFFSET+RX_num));
 			debugln("R:RX_ID=%02X",crc8);
 			XN297_SetTxRxMode(TXRX_OFF);
 			XN297_SetTxRxMode(TX_EN);

Multiprotocol/_Config.h

@@ -257,6 +257,7 @@
 #define	REALACC_NRF24L01_INO
 #define	SGF22_NRF24L01_INO
 #define	SHENQI_NRF24L01_INO
+#define	SHENQI2_NRF24L01_INO
 #define	SYMAX_NRF24L01_INO
 #define	V2X2_NRF24L01_INO
 #define	V761_NRF24L01_INO
@@ -351,6 +352,7 @@
 #define NCC1701_HUB_TELEMETRY		// Use FrSkyD Hub format to send telemetry to TX
 #define OMP_HUB_TELEMETRY			// Use FrSkyD Hub format to send telemetry to TX
 #define V761_HUB_TELEMETRY			// Use FrSkyD Hub format to send telemetry to TX
+#define KAMTOM_HUB_TELEMETRY		// Use FrSkyD Hub format to send telemetry to TX
 #define YUXIANG_HUB_TELEMETRY
 #define PROPEL_HUB_TELEMETRY		// Use FrSkyD Hub format to send telemetry to TX
 #define CABELL_HUB_TELEMETRY		// Use FrSkyD Hub format to send telemetry to TX
@@ -834,6 +836,8 @@ const PPM_Parameters PPM_prot[14*NBR_BANKS]=	{
   		J20
 	PROTO_SHENQI
 		NONE
+	PROTO_SHENQI2
+		NONE
 	PROTO_SKYARTEC
 		NONE
 	PROTO_SLT

Protocols_Details.md

@@ -115,6 +115,7 @@ CFlie|38|CFlie||||||||NRF24L01|
 [JIABAILE](Protocols_Details.md#JIABAILE---102)|102|Std|Gyro|||||||NRF24L01|XN297
 [JJRC345](Protocols_Details.md#JJRC345---71)|71|JJRC345|SkyTmblr|||||||NRF24L01|XN297
 [JOYSWAY](Protocols_Details.md#JOYSWAY---84)|84|||||||||NRF24L01|XN297
+[KAMTOM](Protocols_Details.md#KAMTOM---104)|104|||||||||NRF24L01|XN297
 [KF606](Protocols_Details.md#KF606---49)|49|KF606|MIG320|ZCZ50||||||NRF24L01|XN297
 [KN](Protocols_Details.md#KN---9)|9|WLTOYS|FEILUN|||||||NRF24L01|
 [Kyosho](Protocols_Details.md#Kyosho---73)|73|FHSS|Hype|||||||A7105|
@@ -143,6 +144,7 @@ CFlie|38|CFlie||||||||NRF24L01|
 [Scorpio](Protocols_Details.md#Scorpio---94)|94|||||||||CYRF6936|
 [SGF22](Protocols_Details.md#SGF22---97)|97|F22|F22S|J20||||||NRF24L01|XN297
 [Shenqi](Protocols_Details.md#Shenqi---19)|19|Shenqi||||||||NRF24L01|LT8900
+[Shenqi2](Protocols_Details.md#Shenqi2---105)|105|Shenqi2||||||||NRF24L01|XN297
 [Skyartec](Protocols_Details.md#Skyartec---68)|68|||||||||CC2500|CC2500
 [SLT](Protocols_Details.md#SLT---11)|11|SLT_V1|SLT_V2|Q100|Q200|MR100|V1_4CH|RF_SIM||NRF24L01|CC2500
 [SymaX](Protocols_Details.md#Symax---10)|10|SYMAX|SYMAX5C|||||||NRF24L01|
@@ -1982,13 +1984,13 @@ Model: DF-Models SkyTumbler
 RTH not supported
 
 ## KAMTOM - *104*
-Models: KAMTOM KM24xx (KM32xx?), Pinecone SG-24xx
+Models: KAMTOM RC Racing KM24xx (KM32xx?), Pinecone SG-24xx
 
 CH1|CH2|CH3|CH4|CH5|CH6|CH7
 ---|---|---|---|---|---|---
 ST|TH|UNK1|UNK2|ST_TR|TH_TR|TH_DR
 
-Low batt telemetry is not yet added.
+Low battery telemetry in A1 with 0 = low batt
 
 ## KYOSHO2 - *93*
 Model: TX KT-17, Minium Edge 540, Minium Citabria
@@ -2160,6 +2162,15 @@ CH1|CH2|CH3|CH4
 
 Throttle +100%=full forward,0%=stop,-100%=full backward.
 
+## Shenqi2 - *105*
+Autobind protocol
+
+Model: Shenqiwei 1/20 Mini Motorcycle
+
+CH1|CH2
+---|---
+ST|TH
+
 ## Symax - *10*
 Autobind protocol
 

docs/Compiling.md

@@ -108,7 +108,7 @@ The images below indicate the pin layout and the location of the ground pin on t
 |:---:|:---:|:---:|
 <img src="images/V2b_ISP.jpeg" width="189" height="200" /> | <img src="images/MPTM_PCB_2.3d_ISP.png" width="486" height="201" /> | <img src="images/ProMini_ISP.png" width="195" height="200" /> |
 
-You are now ready to plug in the USB programmer to the computer.  If you are looking for a good working USBasp Windows driver, [use this one](http://www.protostack.com/download/USBasp-win-driver-x86-x64-v3.0.7.zip).
+You are now ready to plug in the USB programmer to the computer.  If you are looking for a good working USBasp Windows driver, [use this one](https://protostack.com.au/download/USBasp-win-driver-x86-x64-v3.0.7.zip).
 
 ### Burn bootloader and set fuses
 The bootloader only needs to be burned once, unless you decide to switch from one option to the other (or it is accidentally erased).  If you have already burned the bootloader / set the fuses you can skip this step.