ASF try 3

Only 1 ID and 1 frequency for now

Lua_scripts/MultiChan.txt

@@ -35,6 +35,7 @@
 6,3,DSM,X_2F,0,CH5,CH6,CH7,CH8,CH9,CH10,CH11,CH12,n-a,ThKill
 6,4,DSM,AUTO,0,CH5,CH6,CH7,CH8,CH9,CH10,CH11,CH12,n-a,ThKill
 6,5,DSM,R_1F,0,AUX3,AUX4,AUX5
+6,6,DSM,2SFC,0
 70,0,DSM_RX,RX,0,CH5,CH6,CH7,CH8,CH9,CH10,CH11,CH12
 70,1,DSM_RX,CPPM,0,CH5,CH6,CH7,CH8,CH9,CH10,CH11,CH12
 45,0,E01X,E012,1,n-a,Flip,n-a,HLess,RTH
@@ -157,7 +158,7 @@
 74,1,RadioLink,Air,0,CH5,CH6,CH7,CH8,FS_CH1,FS_CH2,FS_CH3,FS_CH4,FS_CH5,FS_CH6,FS_CH7,FS_CH8
 74,2,RadioLink,DumboRC,0,CH5,CH6,CH7,CH8,FS_CH1,FS_CH2,FS_CH3,FS_CH4,FS_CH5,FS_CH6,FS_CH7,FS_CH8
 74,3,RadioLink,RC4G,0,CH5,FS_CH1,FS_CH2,FS_CH3,FS_CH4
-76,0,Realacc,R11,1,Flip,Light,Calib,HLess,RTH,UNK
+76,0,Realacc,Std,1,Flip,Light,Calib,HLess,RTH,UNK
 50,0,Redpine,Fast,0,sCH5,sCH6,sCH7,sCH8,sCH9,sCH10,sCH11,sCH12,sCH13,sCH14,sCH15,sCH16
 50,1,Redpine,Slow,0,sCH5,sCH6,sCH7,sCH8,sCH9,sCH10,sCH11,sCH12,sCH13,sCH14,sCH15,sCH16
 21,0,Futaba,SFHSS,0,CH5,CH6,CH7,CH8
@@ -215,3 +216,4 @@
 96,0,BumbleB
 97,0,SGF22,Std,1,Mode,Flip,LED,Pict,Video
 61,1,EazyRC
+98,0,Kyosho3,ASF,0

Multiprotocol/CYRF6936_SPI.ino

@@ -249,7 +249,7 @@ void CYRF_WriteDataPacket(const uint8_t dpbuffer[])
 }
 */
 //NOTE: This routine will reset the CRC Seed
-void CYRF_FindBestChannels(uint8_t *channels, uint8_t len, uint8_t minspace, uint8_t min, uint8_t max)
+void CYRF_FindBestChannels(uint8_t *channels, uint8_t len, uint8_t minspace, uint8_t min, uint8_t max, uint8_t forced)
 {
 	#define NUM_FREQ 80
 	#define FREQ_OFFSET 4
@@ -269,7 +269,12 @@ void CYRF_FindBestChannels(uint8_t *channels, uint8_t len, uint8_t minspace, uin
 	delayMilliseconds(1);
 	for(i = 0; i < NUM_FREQ; i++)
 	{
-		CYRF_ConfigRFChannel(protocol==PROTO_LOSI?i|1:i);
+		if(((i&1) && forced == FIND_CHANNEL_EVEN) || (!(i&1) && forced == FIND_CHANNEL_ODD))
+		{
+			rssi[i] = 0xFF;
+			continue;
+		}
+		CYRF_ConfigRFChannel(i);	//protocol==PROTO_LOSI?i|1:i);
 		delayMicroseconds(270);					//slow channel require 270usec for synthesizer to settle
         if( !(CYRF_ReadRegister(CYRF_05_RX_CTRL) & 0x80)) {
             CYRF_WriteRegister(CYRF_05_RX_CTRL, 0x80); //Prepare to receive

Multiprotocol/DSM_cyrf6936.ino

@@ -19,11 +19,10 @@
 
 //#define DSM_DEBUG_FWD_PGM
 //#define DEBUG_BIND  1
-//#define DSM_GR300
 
-#define CLONE_BIT_MASK 0x20 
-
-#define DSM_BIND_CHANNEL 0x0d //13 This can be any odd channel
+#define CLONE_BIT_MASK			0x20
+#define DSM_BIND_CHANNEL		0x0D	//13 This can be any odd channel
+#define DSM2_SFC_PERIOD			16500
 
 //During binding we will send BIND_COUNT packets
 //One packet each 10msec
@@ -32,8 +31,8 @@
 // Lemon-RX G2s seems to have a timeout waiting for the channel to get quiet after the 
 // first good BIND packet.. If using 3s (300), Lemon-RX will not transmit the BIND-Response packet. 
 
-#define DSM_BIND_COUNT             180  // About 1.8s
-#define DSM_BIND_COUNT_READ        600  // About 4.2s of waiting for Response
+#define DSM_BIND_COUNT			180  // About 1.8s
+#define DSM_BIND_COUNT_READ		600  // About 4.2s of waiting for Response
 
 enum {
 	DSM_BIND_WRITE=0,
@@ -110,7 +109,6 @@ static void __attribute__((unused)) DSM_build_bind_packet()
 		#endif
 	else									// DSMX_2F && DSM_AUTO
 		packet[12] = 0xb2;					// DSMX/2048 2 packets
-	
 
 	packet[13] = 0x00;						//???
 	for(i = 8; i < 14; i++)
@@ -137,8 +135,13 @@ static void __attribute__((unused)) DSM_update_channels()
 	if(num_ch<3 || num_ch>12)
 		num_ch=6;						// Default to 6 channels if invalid choice...
 
-	if(sub_protocol==DSMR && num_ch>7)
-		num_ch=7;						// Max 7 channels in DSMR
+	#ifndef MULTI_AIR
+		if(sub_protocol==DSMR && num_ch>7)
+			num_ch=7;						// Max 7 channels in DSMR
+
+		if(sub_protocol==DSM2_SFC && num_ch>5)
+			num_ch=5;						// Max 5 channels in DSM2_SFC
+	#endif
 
 	// Create channel map based on number of channels and refresh rate
 	uint8_t idx=num_ch-3;
@@ -175,7 +178,7 @@ static void __attribute__((unused)) DSM_build_data_packet(uint8_t upper)
 	}
 
 	#ifndef MULTI_AIR
-		if(sub_protocol == DSMR)
+		if(sub_protocol == DSMR || sub_protocol == DSM2_SFC)
 		{
 			for (uint8_t i = 0; i < 7; i++)
 			{
@@ -266,12 +269,18 @@ static uint8_t __attribute__((unused)) DSM_Check_RX_packet()
 uint16_t DSM_callback()
 {
 	#if defined MULTI_EU
-		if(sub_protocol == DSM2_1F || sub_protocol == DSM2_2F)
+		if(sub_protocol == DSM2_1F || sub_protocol == DSM2_2F || sub_protocol == DSM2_SFC)
+		{
+			SUB_PROTO_INVALID;
 			return 11000;
+		}
 	#endif
 	#if defined MULTI_AIR
-		if(sub_protocol == DSMR)
+		if(sub_protocol == DSMR || sub_protocol == DSM2_SFC)
+		{
+			SUB_PROTO_INVALID;
 			return 11000;
+		}
 	#endif
 	#define DSM_CH1_CH2_DELAY	4010			// Time between write of channel 1 and channel 2
 	#ifdef STM32_BOARD
@@ -285,12 +294,7 @@ uint16_t DSM_callback()
 		uint8_t len;
 	#endif
 	uint8_t start;
-
-	#ifdef DSM_GR300
-		uint16_t timing=5000+(convert_channel_8b(CH13)*100);
-		debugln("T=%u",timing);
-	#endif
-	
+	//debugln("P=%d",phase);
 	switch(phase)
 	{
 		case DSM_BIND_WRITE:
@@ -371,24 +375,32 @@ uint16_t DSM_callback()
 			CYRF_SetTxRxMode(TX_EN);
 			hopping_frequency_no = 0;
 			phase = DSM_CH1_WRITE_A;							// in fact phase++
+			#ifndef MULTI_AIR
 			if(sub_protocol == DSMR)
 				DSM_set_sop_data_crc(false, true);
 			else
+			#endif
 				DSM_set_sop_data_crc(true, sub_protocol==DSMX_2F||sub_protocol==DSMX_1F);	//prep CH1
 			return 10000;
 		case DSM_CH1_WRITE_A:
 			#ifdef MULTI_SYNC
-				telemetry_set_input_sync(11000);				// Always request 11ms spacing even if we don't use half of it in 22ms mode
+				if(sub_protocol!=DSM2_SFC)
+					telemetry_set_input_sync(11000);			// Always request 11ms spacing even if we don't use half of it in 22ms mode
+				else
+					telemetry_set_input_sync(DSM2_SFC_PERIOD);
 			#endif
+			#ifndef MULTI_AIR
 			if(sub_protocol == DSMR)
 				CYRF_SetPower(0x08);							//Keep transmit power in sync
 			else
+			#endif
 				CYRF_SetPower(0x28);							//Keep transmit power in sync
 		case DSM_CH1_WRITE_B:
 			DSM_build_data_packet(phase == DSM_CH1_WRITE_B);	// build lower or upper channels
 		case DSM_CH2_WRITE_A:
 		case DSM_CH2_WRITE_B:
 			CYRF_ReadRegister(CYRF_04_TX_IRQ_STATUS);			// clear IRQ flags
+			//debugln_time("");
 			CYRF_WriteDataPacket(packet);
 			#if 0
 				for(uint8_t i=0;i<16;i++)
@@ -426,14 +438,14 @@ uint16_t DSM_callback()
 			phase++;										// change from CH2_CHECK to CH2_READ
 			CYRF_SetTxRxMode(RX_EN);						//Receive mode
 			CYRF_WriteRegister(CYRF_05_RX_CTRL, 0x87);		//0x80??? //Prepare to receive
-			if(sub_protocol==DSMR)
-			{
-				phase = DSM_CH2_READ_B;
-				return 11000 - DSM_WRITE_DELAY - DSM_READ_DELAY;
-			}
-			#ifdef DSM_GR300
-				if(num_ch==3)
-					return timing - DSM_CH1_CH2_DELAY - DSM_WRITE_DELAY - DSM_READ_DELAY;
+			#ifndef MULTI_AIR
+				if(sub_protocol==DSMR || sub_protocol == DSM2_SFC)
+				{
+					phase = DSM_CH2_READ_B;
+					if(sub_protocol == DSM2_SFC)
+						return DSM2_SFC_PERIOD - DSM_CH1_CH2_DELAY - DSM_WRITE_DELAY - DSM_READ_DELAY;
+					return 11000 - DSM_WRITE_DELAY - DSM_READ_DELAY;
+				}
 			#endif
 			return 11000 - DSM_CH1_CH2_DELAY - DSM_WRITE_DELAY - DSM_READ_DELAY;
 		case DSM_CH2_READ_A:
@@ -468,10 +480,6 @@ uint16_t DSM_callback()
 				CYRF_WriteRegister(CYRF_29_RX_ABORT, 0x00);	// Clear abort RX operation
 				CYRF_WriteRegister(CYRF_05_RX_CTRL, 0x87);	//0x80???	//Prepare to receive
 				phase = DSM_CH2_READ_B;
-				#ifdef DSM_GR300
-					if(num_ch==3)
-						return timing;
-				#endif
 				return 11000;
 			}
 			if (phase == DSM_CH2_READ_A)
@@ -492,19 +500,15 @@ uint16_t DSM_callback()
 				else										
 				{											//Normal mode 22ms
 					phase = DSM_CH1_WRITE_A;				// change from CH2_CHECK_A to CH1_WRITE_A (ie no upper)
-					#ifdef DSM_GR300
-						if(num_ch==3)
-							return timing - DSM_CH1_CH2_DELAY - DSM_WRITE_DELAY ;
+					#ifndef MULTI_AIR
+						if(sub_protocol==DSM2_SFC)
+							return DSM2_SFC_PERIOD - DSM_CH1_CH2_DELAY - DSM_WRITE_DELAY ;
 					#endif
 					return 22000 - DSM_CH1_CH2_DELAY - DSM_WRITE_DELAY ;
 				}
 			}
 			else
 				phase = DSM_CH1_WRITE_A;					// change from CH2_CHECK_B to CH1_WRITE_A (upper already transmitted so transmit lower)
-			#ifdef DSM_GR300
-				if(num_ch==3)
-					return timing - DSM_CH1_CH2_DELAY - DSM_WRITE_DELAY ;
-			#endif
 			return 11000 - DSM_CH1_CH2_DELAY - DSM_WRITE_DELAY;
 #endif
 	}
@@ -547,15 +551,13 @@ void DSM_init()
 				SUB_PROTO_INVALID;
 			else
 			{
-				SUB_PROTO_VALID;
+				//SUB_PROTO_VALID;
 				uint8_t row = rx_tx_addr[3]%22;
 				for(uint8_t i=0; i< 4; i++)
 					cyrfmfg_id[i] = pgm_read_byte_near(&DSMR_ID_FREQ[row][i]);
 				for(uint8_t i=0; i< 23; i++)
 					hopping_frequency[i] = pgm_read_byte_near(&DSMR_ID_FREQ[row][i+4]);
 			}
-		#else
-			SUB_PROTO_INVALID;
 		#endif
 	}
 	else
@@ -568,25 +570,25 @@ void DSM_init()
 				uint16_t temp = DSM_CLONE_EEPROM_OFFSET;
 				for(uint8_t i=0;i<4;i++)
 					cyrfmfg_id[i] = eeprom_read_byte((EE_ADDR)temp++);
-        #if DEBUG_BIND
-          debugln("Using cloned ID");  
-  				debug("Clone ID=")
-  				for(uint8_t i=0;i<4;i++)
-  					debug("%02x ", cyrfmfg_id[i]);
-  				debugln("");
-          #endif
+				#if DEBUG_BIND
+					debugln("Using cloned ID");  
+					debug("Clone ID=")
+					for(uint8_t i=0;i<4;i++)
+						debug("%02x ", cyrfmfg_id[i]);
+					debugln("");
+				#endif
 			}
 			else
 			{
 				SUB_PROTO_INVALID;
-        #if DEBUG_BIND
+				#if DEBUG_BIND
 				  debugln("No valid cloned ID");
-        #endif
+				#endif
 			}
 		}
 		else
 		{
-			SUB_PROTO_VALID;
+			//SUB_PROTO_VALID;
 			CYRF_GetMfgData(cyrfmfg_id);
 		}
 	}
@@ -602,8 +604,8 @@ void DSM_init()
 		//Fix for OrangeRX using wrong DSM_pncodes by preventing access to "Col 8"
 		if(sop_col==0 && sub_protocol != DSMR)
 		{
-		cyrfmfg_id[rx_tx_addr[0]%3]^=0x01;					//Change a bit so sop_col will be different from 0
-		sop_col = (cyrfmfg_id[0] + cyrfmfg_id[1] + cyrfmfg_id[2] + 2) & 0x07;
+			cyrfmfg_id[rx_tx_addr[0]%3]^=0x01;					//Change a bit so sop_col will be different from 0
+			sop_col = (cyrfmfg_id[0] + cyrfmfg_id[1] + cyrfmfg_id[2] + 2) & 0x07;
 		}
 	}
 
@@ -616,7 +618,7 @@ void DSM_init()
 	else if(sub_protocol != DSMR)
 	{ 
 		uint8_t tmpch[10];
-		CYRF_FindBestChannels(tmpch, 10, 5, 3, 75);
+		CYRF_FindBestChannels(tmpch, 10, 5, 3, 75, FIND_CHANNEL_ANY);
 		//
 		uint8_t idx = random(0xfefefefe) % 10;
 		hopping_frequency[0] = tmpch[idx];
@@ -639,10 +641,10 @@ void DSM_init()
 	{
 		DSM_initialize_bind_phase();		
 		phase = DSM_BIND_WRITE;
-    bind_counter=DSM_BIND_COUNT;
-    #if DEBUG_BIND
-      debugln("Bind Started: write count=%d",bind_counter);
-    #endif
+		bind_counter=DSM_BIND_COUNT;
+		#if DEBUG_BIND
+			debugln("Bind Started: write count=%d",bind_counter);
+		#endif
 	}
 	else
 		phase = DSM_CHANSEL;

Multiprotocol/Devo_cyrf6936.ino

@@ -365,7 +365,7 @@ static void __attribute__((unused)) DEVO_cyrf_init()
 
 static void __attribute__((unused)) DEVO_set_radio_channels()
 {
-	CYRF_FindBestChannels(hopping_frequency, 3, 4, 4, 80);
+	CYRF_FindBestChannels(hopping_frequency, 3, 4, 4, 80, FIND_CHANNEL_ANY);
 	hopping_frequency[3] = hopping_frequency[0];
 	hopping_frequency[4] = hopping_frequency[1];
 }

Multiprotocol/J6Pro_cyrf6936.ino

@@ -124,7 +124,7 @@ static void __attribute__((unused)) j6pro_set_radio_channels()
 {
     //FIXME: Query free channels
     //lowest channel is 0x08, upper channel is 0x4d?
-    CYRF_FindBestChannels(hopping_frequency, 3, 5, 8, 77);
+    CYRF_FindBestChannels(hopping_frequency, 3, 5, 8, 77, FIND_CHANNEL_ANY);
     hopping_frequency[3] = hopping_frequency[0];
 }
 

Multiprotocol/Kyosho3_cyrf6936.ino

@@ -0,0 +1,125 @@
+/*
+ This project is free software: you can redistribute it and/or modify
+ it under the terms of the GNU General Public License as published by
+ the Free Software Foundation, either version 3 of the License, or
+ (at your option) any later version.
+
+ Multiprotocol is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ GNU General Public License for more details.
+
+ You should have received a copy of the GNU General Public License
+ along with Multiprotocol.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#if defined(KYOSHO3_CYRF6936_INO)
+
+#include "iface_cyrf6936.h"
+
+//#define KYOSHO3_FORCE_ID
+//#define KYOSHO3_DEBUG
+
+#define KYOSHO3_BIND_PACKET_SIZE	4
+#define KYOSHO3_PACKET_SIZE			9
+
+const uint8_t PROGMEM KYOSHO3_init_vals[][2] = {
+	//Init from dump
+	{CYRF_0B_PWR_CTRL, 0x00},					// PMU
+	{CYRF_32_AUTO_CAL_TIME, 0x3C},				// Default init value
+	{CYRF_35_AUTOCAL_OFFSET, 0x14},				// Default init value
+	{CYRF_03_TX_CFG, 0x28 | CYRF_BIND_POWER},	// 8DR Mode, 64 chip codes
+	{CYRF_10_FRAMING_CFG, 0xA4},				// SOP and LEN enable
+	{CYRF_1F_TX_OVERRIDE, 0x05},				// Disable CRC, Data invert
+	{CYRF_1E_RX_OVERRIDE, 0x04},				// CRC check disabled
+	//{CYRF_11_DATA32_THOLD, 0x04},				// ???Using 64 chip...
+	{CYRF_12_DATA64_THOLD, 0x0E},				// Default
+	{CYRF_06_RX_CFG, 0x52},						// AGC disabled, LNA enabled, override enabled
+};
+
+static uint16_t __attribute__((unused)) KYOSHO3_send_packet()
+{
+	CYRF_SetPower(0x28);
+	if(IS_BIND_IN_PROGRESS)
+	{
+		packet[0] = 0xAA;
+		//ID
+		memcpy(&packet[1],&rx_tx_addr[1],3);
+		CYRF_WriteDataPacketLen(packet, KYOSHO3_BIND_PACKET_SIZE);
+		#ifdef KYOSHO3_DEBUG
+			debug("P:");
+			for(uint8_t i=0;i<KYOSHO3_BIND_PACKET_SIZE;i++)
+				debug(" %02X",packet[i]);
+			debugln("");
+		#endif
+		return 2434;
+	}
+	else
+	{
+		//ID
+		memcpy(packet,&rx_tx_addr[1],3);
+		//Channels
+		for(uint8_t i=0;i<4;i++)
+		{
+			packet[3] >>= 2;
+			packet[3] |= Channel_data[i]<<6;
+			packet[4+i]  = Channel_data[i]>>3;
+		}
+		//Checksum
+		packet[8] = packet[3];
+		for(uint8_t i=4;i<8;i++)
+			packet[8] += packet[i];
+		//Timing
+		phase ^= 0x01;
+		CYRF_WriteDataPacketLen(packet, KYOSHO3_PACKET_SIZE);
+		#ifdef KYOSHO3_DEBUG
+			debug("P:");
+			for(uint8_t i=0;i<KYOSHO3_PACKET_SIZE;i++)
+				debug(" %02X",packet[i]);
+			debugln("");
+		#endif
+		if(phase)
+			return 9047;
+	}
+	return 6957;
+}
+
+uint16_t KYOSHO3_callback()
+{
+	if(IS_BIND_IN_PROGRESS)
+	{
+		if(--bind_counter==0)
+			BIND_DONE;
+	}
+	return KYOSHO3_send_packet();
+}
+
+void KYOSHO3_init()
+{ 
+	//Config CYRF registers
+	for(uint8_t i = 0; i < sizeof(KYOSHO3_init_vals) / 2; i++)	
+		CYRF_WriteRegister(pgm_read_byte_near(&KYOSHO3_init_vals[i][0]), pgm_read_byte_near(&KYOSHO3_init_vals[i][1]));
+	CYRF_WritePreamble(0x333304);
+
+	//Find a free even channel
+	CYRF_FindBestChannels(hopping_frequency,1,1,0x04,0x50, FIND_CHANNEL_EVEN);
+	hopping_frequency[0] = 0x12;
+
+	#ifdef KYOSHO3_FORCE_ID					// data taken from TX dump
+		rx_tx_addr[1] = 0x01;
+		rx_tx_addr[2] = 0xAB;
+		rx_tx_addr[3] = 0x31;
+		hopping_frequency[0] = 0x04;
+	#endif
+	#ifdef KYOSHO3_DEBUG
+		debugln("ID: %02X %02X %02X",rx_tx_addr[1],rx_tx_addr[2],rx_tx_addr[3]);
+		debugln("RF CH: %02X",hopping_frequency[0]);
+	#endif
+
+	CYRF_ConfigRFChannel(hopping_frequency[0]);
+	
+	bind_counter = 8217;
+	phase = 0;
+}
+
+#endif

Multiprotocol/Losi_cyrf6936.ino

@@ -169,8 +169,7 @@ void LOSI_init()
 {
 	LOSI_cyrf_init();
 
-	CYRF_FindBestChannels(hopping_frequency, 1, 0, 0x07, 0x4F);	// 0x07 and 0x4F are unknown limits, this routine resets the CRC Seed to 0
-	hopping_frequency[0] |= 1;									// Only odd channels are used, integrated in CYRF code...
+	CYRF_FindBestChannels(hopping_frequency, 1, 0, 0x07, 0x4F, FIND_CHANNEL_ODD);	// 0x07 and 0x4F are unknown limits, this routine resets the CRC Seed to 0
 
 	crc8 = 0;
 	crc8 = (uint16_t)LOSI_check(((rx_tx_addr[2]&0x0F) << 8) + rx_tx_addr[3]) >> 12;

Multiprotocol/Multi.txt

@@ -3,7 +3,7 @@
 3,FrskyD,D8,Cloned
 4,Hisky,Hisky,HK310
 5,V2x2,V2x2,JXD506,MR101
-6,DSM,DSM2_1F,DSM2_2F,DSMX_1F,DSMX_2F,AUTO,DSMR_1F
+6,DSM,DSM2_1F,DSM2_2F,DSMX_1F,DSMX_2F,AUTO,DSMR_1F,DSMR,DSM2_SFC
 7,Devo,8CH,10CH,12CH,6CH,7CH
 8,YD717,YD717,SKYWLKR,SYMAX4,XINXUN,NIHUI
 9,KN,WLTOYS,FEILUN
@@ -73,7 +73,7 @@
 73,Kyosho,FHSS,Hype
 74,RadioLink,Surface,Air,DumboRC,RC4G
 75,---
-76,Realacc,R11
+76,Realacc
 77,OMP
 78,M-Link
 79,WFLY,RF20x
@@ -94,3 +94,4 @@
 95,BlueFly
 96,BumbleB
 97,SGF22
+98,Kyosho3

Multiprotocol/Multi_Protos.ino

@@ -109,6 +109,7 @@ const char STR_BLUEFLY[]    ="BlueFly";
 const char STR_BUMBLEB[]    ="BumbleB";
 const char STR_SGF22[]      ="SGF22";
 const char STR_EAZYRC[]     ="EazyRC";
+const char STR_KYOSHO3[]    ="Kyosho3";
 
 const char STR_SUBTYPE_FLYSKY[] =     "\x04""Std\0""V9x9""V6x6""V912""CX20";
 const char STR_SUBTYPE_HUBSAN[] =     "\x04""H107""H301""H501";
@@ -121,9 +122,9 @@ const char STR_SUBTYPE_FRSKYD[] =     "\x06""D8\0   ""Cloned";
 const char STR_SUBTYPE_HISKY[] =      "\x05""Std\0 ""HK310";
 const char STR_SUBTYPE_V2X2[] =       "\x06""Std\0  ""JXD506""MR101\0";
 #ifndef MULTI_EU
-	const char STR_SUBTYPE_DSM[] =        "\x04""2 1F""2 2F""X 1F""X 2F""Auto""R 1F";
+	const char STR_SUBTYPE_DSM[] =        "\x04""2 1F""2 2F""X 1F""X 2F""Auto""R 1F""2SFC";
 #else
-	const char STR_SUBTYPE_DSM[] =        "\x04""--->""--->""X 1F""X 2F""Auto""R 1F";
+	const char STR_SUBTYPE_DSM[] =        "\x04""--->""--->""X 1F""X 2F""Auto""R 1F""----";
 #endif
 const char STR_SUBTYPE_DEVO[] =       "\x04""8ch\0""10ch""12ch""6ch\0""7ch\0";
 const char STR_SUBTYPE_YD717[] =      "\x07""Std\0   ""SkyWlkr""Syma X4""XINXUN\0""NIHUI\0 ";
@@ -169,9 +170,9 @@ const char STR_SUBTYPE_HOTT[] =       "\x07""Sync\0  ""No_Sync";
 const char STR_SUBTYPE_PELIKAN[] =    "\x05""Pro\0 ""Lite\0""SCX24";
 const char STR_SUBTYPE_V761[] =       "\x05""3ch\0 ""4ch\0 ""TOPRC";
 const char STR_SUBTYPE_RLINK[] =      "\x07""Surface""Air\0   ""DumboRC""RC4G\0  ";
-const char STR_SUBTYPE_REALACC[] =    "\x03""R11";
 const char STR_SUBTYPE_KYOSHO[] =     "\x04""FHSS""Hype";
 const char STR_SUBTYPE_KYOSHO2[] =    "\x05""KT-17";
+const char STR_SUBTYPE_KYOSHO3[] =    "\x03""ASF";
 const char STR_SUBTYPE_FUTABA[] =     "\x05""SFHSS";
 const char STR_SUBTYPE_JJRC345[] =    "\x08""JJRC345\0""SkyTmblr";
 const char STR_SUBTYPE_MOULDKG[] =    "\x06""Analog""Digit\0";
@@ -259,7 +260,7 @@ const mm_protocol_definition multi_protocols[] = {
 		{PROTO_DM002,      STR_DM002,     NO_SUBTYPE,            0, OPTION_NONE,    0, 0, SW_NRF,    DM002_init,      DM002_callback      },
 	#endif
 	#if defined(DSM_CYRF6936_INO)
-		{PROTO_DSM,        STR_DSM,       STR_SUBTYPE_DSM,       6, OPTION_MAXTHR,  0, 1, SW_CYRF,   DSM_init,        DSM_callback        },
+		{PROTO_DSM,        STR_DSM,       STR_SUBTYPE_DSM,       7, OPTION_MAXTHR,  0, 1, SW_CYRF,   DSM_init,        DSM_callback        },
 	#endif
 	#if defined(DSM_RX_CYRF6936_INO)
 		{PROTO_DSM_RX,     STR_DSM_RX,    STR_SUB_DSM_RX,  DSMCPPM, OPTION_NONE,    0, 1, SW_CYRF,   DSM_RX_init,     DSM_RX_callback     },
@@ -388,6 +389,9 @@ const mm_protocol_definition multi_protocols[] = {
 	#if defined(KYOSHO2_NRF24L01_INO)
 		{PROTO_KYOSHO2,    STR_KYOSHO2,   STR_SUBTYPE_KYOSHO2,   1, OPTION_NONE,    0, 0, SW_NRF,    KYOSHO2_init,    KYOSHO2_callback    },
 	#endif
+	#if defined(KYOSHO3_CYRF6936_INO)
+		{PROTO_KYOSHO3,    STR_KYOSHO3,   STR_SUBTYPE_KYOSHO3,   1, OPTION_NONE,    0, 0, SW_CYRF,   KYOSHO3_init,    KYOSHO3_callback    },
+	#endif
 	#if defined(LOLI_NRF24L01_INO)
 		{PROTO_LOLI,       STR_LOLI,      NO_SUBTYPE,            0, OPTION_NONE,    1, 0, SW_NRF,    LOLI_init,       LOLI_callback       },
 	#endif
@@ -437,7 +441,7 @@ const mm_protocol_definition multi_protocols[] = {
 		{PROTO_RLINK,      STR_RLINK,     STR_SUBTYPE_RLINK,     4, OPTION_RFTUNE,  0, 0, SW_CC2500, RLINK_init,      RLINK_callback      },
 	#endif
 	#if defined(REALACC_NRF24L01_INO)
-		{PROTO_REALACC,    STR_REALACC,   STR_SUBTYPE_REALACC,   1, OPTION_NONE,    0, 0, SW_NRF,    REALACC_init,    REALACC_callback    },
+		{PROTO_REALACC,    STR_REALACC,   NO_SUBTYPE,            0, OPTION_NONE,    0, 0, SW_NRF,    REALACC_init,    REALACC_callback    },
 	#endif
 	#if defined(REDPINE_CC2500_INO)
 		{PROTO_REDPINE,    STR_REDPINE,   STR_SUBTYPE_REDPINE,   2, OPTION_RFTUNE,  0, 0, SW_CC2500, REDPINE_init,    REDPINE_callback    },

Multiprotocol/Multiprotocol.h

@@ -19,7 +19,7 @@
 #define VERSION_MAJOR		1
 #define VERSION_MINOR		3
 #define VERSION_REVISION	4
-#define VERSION_PATCH_LEVEL	00
+#define VERSION_PATCH_LEVEL	6
 
 #define MODE_SERIAL 0
 
@@ -125,6 +125,7 @@ enum PROTOCOLS
 	PROTO_BLUEFLY	= 95,	// =>CC2500 & NRF24L01
 	PROTO_BUMBLEB	= 96,	// =>CC2500 & NRF24L01
 	PROTO_SGF22		= 97,	// =>NRF24L01
+	PROTO_KYOSHO3	= 98,	// =>CYRF6936
 
 	
 	PROTO_NANORF	= 126,	// =>NRF24L01
@@ -173,6 +174,7 @@ enum DSM
 	DSMX_2F		= 3,
 	DSM_AUTO	= 4,
 	DSMR		= 5,
+	DSM2_SFC	= 6,
 };
 enum DSM_RX
 {

Multiprotocol/SGF22_nrf24l01.ino

@@ -91,6 +91,8 @@ static void __attribute__((unused)) SGF22_send_packet()
 
 static void __attribute__((unused)) SGF22_initialize_txid()
 {
+	rx_tx_addr[2] &=0x7F;
+	rx_tx_addr[3] &=0x7F;
 	uint8_t val = (( (uint16_t) rx_tx_addr[2] << 8 ) | rx_tx_addr[3])%5;
 
 	const uint8_t hop[5][4] =
@@ -100,7 +102,7 @@ static void __attribute__((unused)) SGF22_initialize_txid()
 	  { 0x15, 0x34, 0x24, 0x44 },
 	  { 0x18, 0x37, 0x27, 0x47 } };
 	memcpy(hopping_frequency, &hop[val], SGF22_RF_NUM_CHANNELS);
-	
+
 	/*//Same code sze...
 	hopping_frequency[0] = 0x0C + 3 * val;
 	hopping_frequency[1] = hopping_frequency[0] + 0x1E;
@@ -110,8 +112,8 @@ static void __attribute__((unused)) SGF22_initialize_txid()
 	if(val    ) hopping_frequency[3]++;*/
 	
 	#ifdef FORCE_SGF22_ORIGINAL_ID
-		rx_tx_addr[2] = 0x1F;
-		rx_tx_addr[3] = 0x61;
+		rx_tx_addr[2] = 0x1F;	// TX2: 27
+		rx_tx_addr[3] = 0x61;	// TX2: 51
 		memcpy(hopping_frequency,"\x15\x34\x24\x44", SGF22_RF_NUM_CHANNELS);    //Original dump=>21=0x15,52=0x34,36=0x24,68=0x44
 	#endif
 	#if 0
@@ -163,7 +165,7 @@ void SGF22_init()
 	SGF22_initialize_txid();
 	SGF22_RF_init();
 	bind_counter=SGF22_BIND_COUNT;
-	packet_sent = packet_count = 0x26;
+	packet_sent = packet_count = 0x26;	// TX2: 26
 	phase = 0;
 }
 

Multiprotocol/TRAXXAS_cyrf6936.ino

@@ -241,7 +241,7 @@ void TRAXXAS_init()
 	//Read CYRF ID
 	CYRF_GetMfgData(cyrfmfg_id);
 	//cyrfmfg_id[0]+=RX_num;				// Not needed since the TX and RX have to match
-	CYRF_FindBestChannels(hopping_frequency,1,1,0x02,0x21);
+	CYRF_FindBestChannels(hopping_frequency,1,1,0x02,0x21, FIND_CHANNEL_ANY);
 	#ifdef TRAXXAS_FORCE_ID					// data taken from TX dump
 		cyrfmfg_id[0]=0x65;					// CYRF MFG ID
 		cyrfmfg_id[1]=0xE2;

Multiprotocol/Validate.h

@@ -266,6 +266,7 @@
 	#undef	E01X_CYRF6936_INO
 	#undef	E129_CYRF6936_INO
 	#undef	J6PRO_CYRF6936_INO
+	#undef	KYOSHO3_CYRF6936_INO
 	#undef	LOSI_CYRF6936_INO
 	#undef	MLINK_CYRF6936_INO
 	#undef	TRAXXAS_CYRF6936_INO
@@ -377,6 +378,7 @@
 	#undef	TRAXXAS_CYRF6936_INO
 	#undef	EAZYRC_NRF24L01_INO
 	#undef	KYOSHO2_NRF24L01_INO
+	#undef	KYOSHO3_CYRF6936_INO
 	#undef	MOULDKG_NRF24L01_INO
 	#undef	SHENQI_NRF24L01_INO
 #endif
@@ -432,7 +434,6 @@
 	#undef	OMP_CCNRF_INO
 	#undef	Q303_CCNRF_INO
 	#undef	Q90C_CCNRF_INO
-	#undef	SLT_CCNRF_INO
 	#undef	V911S_CCNRF_INO
 #endif
 

Multiprotocol/WK2x01_cyrf6936.ino

@@ -487,7 +487,7 @@ void WK_init()
 	CYRF_SetTxRxMode(TX_EN);
 
 	hopping_frequency_no=0;
-	CYRF_FindBestChannels(hopping_frequency, 3, 4, 4, 80);
+	CYRF_FindBestChannels(hopping_frequency, 3, 4, 4, 80, FIND_CHANNEL_ANY);
 	CYRF_ConfigRFChannel(hopping_frequency[0]);
 
 	packet_count = 0;

Multiprotocol/_Config.h

@@ -191,6 +191,7 @@
 #define	E01X_CYRF6936_INO
 #define	E129_CYRF6936_INO
 #define	J6PRO_CYRF6936_INO
+#define	KYOSHO3_CYRF6936_INO
 #define	LOSI_CYRF6936_INO		//Need DSM to be enabled
 #define	MLINK_CYRF6936_INO
 #define	SCORPIO_CYRF6936_INO
@@ -606,6 +607,7 @@ const PPM_Parameters PPM_prot[14*NBR_BANKS]=	{
 		DSMX_1F
 		DSMX_2F
 		DSMR
+		DSM2_SFC
 	PROTO_DSM_RX
 		DSM_RX
 		DSM_CLONE
@@ -738,6 +740,8 @@ const PPM_Parameters PPM_prot[14*NBR_BANKS]=	{
 		KYOSHO_HYPE
 	PROTO_KYOSHO2
 		NONE
+	PROTO_KYOSHO3
+		NONE
 	PROTO_LOLI
 		NONE
 	PROTO_LOSI

Multiprotocol/iface_cyrf6936.h

@@ -71,7 +71,11 @@ enum CYRF_PWR {
     CYRF_PWR_DEFAULT,
 };
 
-
+enum FIND_CHANNEL {
+	FIND_CHANNEL_ANY  = 0,
+	FIND_CHANNEL_EVEN = 1,
+	FIND_CHANNEL_ODD  = 2,
+};
 
 /* SPI CYRF6936 */
 /*

Protocols_Details.md

@@ -75,7 +75,7 @@ CFlie|38|CFlie||||||||NRF24L01|
 [CX10](Protocols_Details.md#CX10---12)|12|GREEN|BLUE|DM007|-|J3015_1|J3015_2|MK33041||NRF24L01|XN297
 [Devo](Protocols_Details.md#DEVO---7)|7|Devo|8CH|10CH|12CH|6CH|7CH|||CYRF6936|
 [DM002](Protocols_Details.md#DM002---33)|33|||||||||NRF24L01|XN297
-[DSM](Protocols_Details.md#DSM---6)|6|DSM2_1F|DSM2_2F|DSMX_1F|DSMX_2F|AUTO|DSMR_1F|||CYRF6936|
+[DSM](Protocols_Details.md#DSM---6)|6|DSM2_1F|DSM2_2F|DSMX_1F|DSMX_2F|AUTO|DSMR_1F|DSM2SFC||CYRF6936|
 [DSM_RX](Protocols_Details.md#DSM_RX---70)|70|Multi|CPPM|||||||CYRF6936|
 [E010R5](Protocols_Details.md#E010R5---81)|81|||||||||CYRF6936|RF2500
 [E016H](Protocols_Details.md#E016H---85)|85|||||||||NRF24L01|XN297
@@ -116,6 +116,7 @@ CFlie|38|CFlie||||||||NRF24L01|
 [KN](Protocols_Details.md#KN---9)|9|WLTOYS|FEILUN|||||||NRF24L01|
 [Kyosho](Protocols_Details.md#Kyosho---73)|73|FHSS|Hype|||||||A7105|
 [Kyosho2](Protocols_Details.md#Kyosho2---93)|93|KT-17||||||||NRF24L01|
+[Kyosho3](Protocols_Details.md#Kyosho3---98)|98|ASF||||||||CYRF6936|
 [LOLI](Protocols_Details.md#LOLI---82)|82|||||||||NRF24L01|
 [Losi](Protocols_Details.md#Losi---89)|89|||||||||CYRF6936|
 [MJXq](Protocols_Details.md#MJXQ---18)|18|WLH08|X600|X800|H26D|E010*|H26WH|PHOENIX*||NRF24L01|XN297
@@ -368,8 +369,6 @@ TX: Axial AX-4 2.4GHz transmitter, HPI TF-41 and Panda Hobby 3CH Smart Radio 2.4
 
 Models: Axial SCX24: Deadbolt, Jeep Wranger Rubicon, Chevrolet 1967 C10, B-17 Betty, HPI RF-50 and Panda Hobby: Tetra K1, X1, X2
 
-**Only 4 frequency hopping tables**
-
 Extended limits supported
 
 CH1|CH2|CH3
@@ -542,12 +541,21 @@ Surface DSMR receivers
 
 **Only 22 IDs available**, use RX num to cycle through them.
 
-Telemetry enabled, extended limits available.
+Telemetry enabled, extended limits available and no channel mapping. Do not use DSM/AUTO to bind but DSM/R_1F instead.
 
 CH1|CH2|CH3|CH4|CH5|CH6|CH7
 ---|---|---|---|---|---|---
 STR|THR|AUX1|AUX2|AUX3|AUX4|AUX5
 
+### Sub_protocol DSM2SFC - *6*
+Surface DSM2 receivers, tested with a SR3100
+
+Extended limits available and no channel mapping. Do not use DSM/AUTO to bind but DSM/2SFC instead.
+
+CH1|CH2|CH3
+---|---|---
+STR|THR|AUX1
+
 ## DSM_RX - *70*
 The DSM receiver protocol enables master/slave trainning, separate access from 2 different radios to the same model,...
 
@@ -622,7 +630,7 @@ Calib is the same as the original radio with both sticks down and to the left in
 Models: Eachine E129/E130 and Twister Ninja 250
 
 ### Sub_protocol C186 - *1*
-Models: C186/E120, C127/E110, K127, C159, C189, C129v2
+Models: RC ERA C186/E120, C127/E110, K127, C159, C189, C129v2
 
 The FC of the heli seems to store the trims Trim A/E/R=CH7..9. If you use these trims, make sure to center them after powering off the heli or they will be added to the previous trims and over correct.
 
@@ -640,6 +648,17 @@ CH1|CH2|CH3|CH4|CH5|CH6|CH7|CH8|CH9|CH10|CH11|CH12
 ---|---|---|---|---|---|---|---|---|----|----|----
 A|E|T|R|CH5|CH6|CH7|CH8|CH9|CH10|CH11|CH12
 
+## Kyosho3 - *98*
+
+### Sub_protocol ASF - *0*
+Surface protocol ASF. Models: Mini-Z.
+
+Extended limits supported
+
+CH1|CH2|CH3|CH4
+---|---|---|---
+STEERING|THROTTLE|CH3|CH4
+
 ## Losi - *89*
 TX: LSR-3000