FX/BM26: new subprotocol

Missing files

Lua_scripts/MultiChan.txt

@@ -86,11 +86,13 @@
 55,1,FrSkyRX,CloneTX,0
 55,2,FrSkyRX,EraseTX,0
 55,3,FrSkyRX,CPPM,0,CH5,CH6,CH7,CH8,CH9,CH10,CH11,CH12,CH13,CH14,CH15,CH16
-58,0,FX,816,1
-58,1,FX,620,1
+58,0,FX,FX816,1
+58,1,FX,FX620,1
 58,2,FX,9630,1,Rate,Gyro,TrimR,TrimA,TrimE
 58,3,FX,Q560,1,FLIP,Gyro,LEDs
 58,4,FX,QF012,1,FLIP,Gyro,Invert,Reset
+58,5,FX,BM26,1,FLIP,Gyro,LEDs,LED,CALIB
+58,6,FX,FX818,1
 20,0,FY326,FY326,1,Flip,RTH,HLess,Expert,Calib
 20,1,FY326,FY319,1,Flip,RTH,HLess,Expert,Calib
 23,0,FY326,FY326,1,Flip,RTH,HLess,Expert
@@ -110,7 +112,7 @@
 26,1,Hontai,JJRCX1,1,Flip,Arm,Pict,Video,HLess,RTH,Calib
 26,2,Hontai,X5C1,1,Flip,Arm,Pict,Video,HLess,RTH,Calib
 26,3,Hontai,FQ777_951,1,Flip,Arm,Pict,Video,HLess,RTH,Calib
-26,4,Hontai,XKK170,1,Rate,Emerg,TakLan,Calib,TrimA,TrimE
+26,4,Hontai,XKK170,1,Rate,Emerg,TakLan,Calib,TrimA,TrimE,Optic
 57,0,HoTT,Sync,0,CH5,CH6,CH7,CH8,CH9,CH10,CH11,CH12,CH13,CH14,CH15,CH16
 57,1,HoTT,No_Sync,0,CH5,CH6,CH7,CH8,CH9,CH10,CH11,CH12,CH13,CH14,CH15,CH16
 2,0,Hubsan,H107,1,Flip,Light,Pict,Video,HLess
@@ -119,7 +121,7 @@
 22,0,J6Pro,Std,0,CH5,CH6,CH7,CH8,CH9,CH10,CH11,CH12
 71,0,JJRC345,JJRC345,1,Flip,HLess,RTH,LED,UNK1,UNK2,UNK3
 71,1,JJRC345,SkyTmblr,1,Flip,HLess,RTH,LED,UNK1,UNK2,UNK3
-49,0,KF606,KF606,1,Trim
+49,0,KF606,KF606,1,Trim,LED
 49,1,KF606,MIG320,1,Trim,LED
 49,2,KF606,ZCZ50,1,Trim,UNK
 9,0,KN,WLToys,0,DRate,THold,IdleUp,Gyro,Ttrim,Atrim,Etrim,Rtrim,Hover
@@ -196,8 +198,8 @@
 62,0,XK,X450,1,FMode,TakeOf,Emerg,3D_6G,Pict,Video
 62,1,XK,X420,1,FMode,TakeOf,Emerg,3D_6G,Pict,Video,Flip,Light
 62,2,XK,Cars,0,FMode,TakeOf,Emerg,3D_6G,Pict,Video,Flip,Light
-99,0,XK2,X4,0,Rate,Mode,Hover,Light
-99,1,XK2,P10,0,Rate,Mode,Hover,Light
+99,0,XK2,X4,0,Rate,Mode,Hover,Light,Stunt
+99,1,XK2,P10,0,Rate,Mode,Hover,Light,Stunt
 8,0,YD717,Std,1,Flip,Light,Pict,Video,HLess
 8,1,YD717,SkyWlkr,1,Flip,Light,Pict,Video,HLess
 8,2,YD717,Simax4,1,Flip,Light,Pict,Video,HLess
@@ -235,3 +237,4 @@
 104,0,KAMTOM,Std,0,ST_Tr,TH_Tr,TH_DR
 105,0,Shenqi2,Std,1
 106,0,WL91x,Std,0
+107,0,WPL,Std,0,Light,TH_DR,ST_DR

Multiprotocol/AFHDS2A_a7105.ino

@@ -93,6 +93,9 @@ static void AFHDS2A_update_telemetry()
 		if (option & 0x80)
 		{// forward 0xAA and 0xAC telemetry to TX, skip rx and tx id to save space
 			packet_in[0]= TX_RSSI;
+			//Fix for CROSSOVER-RX, 
+			if(packet[17+8]==0xFF && packet[21+8]==0xFC && packet[25+8]==0xFF)
+				packet[17+8]=0xFE;	// RX_ERR_RATE needed for TX to validate the telem
 			#if 0
 				debug("T(%02X)=",packet[0]);
 				for(uint8_t i=9;i < AFHDS2A_RXPACKET_SIZE; i++)

Multiprotocol/DSM_cyrf6936.ino

@@ -599,6 +599,7 @@ void DSM_init()
 				uint16_t temp = DSM_CLONE_EEPROM_OFFSET;
 				for(uint8_t i=0;i<4;i++)
 					cyrfmfg_id[i] = eeprom_read_byte((EE_ADDR)temp++);
+					cyrfmfg_id[3]^=RX_num;		//Model match
 				#if DEBUG_BIND
 					debugln("Using cloned ID");  
 					debug("Clone ID=")
@@ -619,8 +620,7 @@ void DSM_init()
 		{
 			//SUB_PROTO_VALID;
 			CYRF_GetMfgData(cyrfmfg_id);
-			//Model match
-			cyrfmfg_id[3]^=RX_num;
+			cyrfmfg_id[3]^=RX_num;			//Model match
 		}
 	}
 

Multiprotocol/E129_cyrf6936.ino

@@ -44,9 +44,8 @@ static void __attribute__((unused)) E129_build_data_packet()
 		packet[ 1] = 0xA6;								// Set to A5 every few packets??
 
 		//Flags
-		if(sub_protocol == E129_E129)
-			packet[ 2] = 0xF7;							// High rate 0xF7, low 0xF4
-		else //C186
+		packet[ 2] = 0xF7;								// E129 High rate 0xF7, low 0xF4
+		if(sub_protocol == E129_C186)
 		{
 			packet[ 2] = 0xFA;							// High rate 0xFA, medium 0xF7, low 0xF4
 			packet[13] = bit_reverse(rx_tx_addr[2]);

Multiprotocol/FX_nrf24l01.ino

@@ -42,6 +42,9 @@ Multiprotocol is distributed in the hope that it will be useful,
 #define FX_QF012_PACKET_PERIOD		12194
 #define FX_QF012_RX_PAYLOAD_SIZE	3
 
+#define FX_BM26_BIND_CHANNEL		40      
+#define FX_BM26_PACKET_PERIOD		14066
+
 //#define FORCE_FX620_ID
 //#define FORCE_FX9630_ID
 //#define FORCE_QIDI_ID
@@ -85,11 +88,17 @@ static void __attribute__((unused)) FX_send_packet()
 	//Channels
 	uint8_t val;
 	if (sub_protocol >= FX9630)
-	{ // FX9630 & FX_Q560 & FX_QF012
+	{ // FX9630 & FX_Q560 & FX_QF012 & FX_BM26
 		packet[0] = convert_channel_8b(THROTTLE);
 		packet[1] = convert_channel_8b(AILERON);
 		packet[2] = 0xFF - convert_channel_8b(ELEVATOR);
 		packet[3] = convert_channel_8b(RUDDER);
+		if ( sub_protocol == FX_BM26 )  // BM26 Ail, Elev, Rud range between 0x00-0x3F-0x7F
+    	{
+			packet[1] >>= 1;
+			packet[2] >>= 1;
+			packet[3] >>= 1;
+    	}
 		val = trim_ch==0 ? 0x20 : (convert_channel_8b(trim_ch + CH6) >> 2);	// no trim on Throttle
 		packet[4] = val;			// Trim for channel x 0C..20..34
 		packet[5] = (trim_ch << 4)	// channel x << 4
@@ -99,10 +108,21 @@ static void __attribute__((unused)) FX_send_packet()
 					// QF012=>0:beginner(6G), 1:mid(3D), 2:expert(Gyro off) 
 					| (Channel_data[CH6] < CHANNEL_MIN_COMMAND ? 0x00 : (Channel_data[CH6] > CHANNEL_MAX_COMMAND ? 0x04 : 0x02));
 		if(sub_protocol == FX_Q560)
-			packet[5] |= GET_FLAG(CH7_SW, 0x18);	// Q560 LED flag 0x10 conflicting with trim_ch... Corrected on new boards using 0x08 instead
+			packet[5] |= GET_FLAG(CH7_SW, 0x18);		// Q560 LED flag 0x10 conflicting with trim_ch... Corrected on new boards using 0x08 instead
 		else if (sub_protocol == FX_QF012) 
-      			packet[5] |=  GET_FLAG(CH7_SW, 0x40)  // QF012 invert flight
-                		    | GET_FLAG(CH8_SW, 0x80);  // QF012 Restore fine tunning midpoint
+      			packet[5] |=  GET_FLAG(CH7_SW, 0x40)	// QF012 invert flight
+                		  |   GET_FLAG(CH8_SW, 0x80);	// QF012 Restore fine tunning midpoint
+		else if ( sub_protocol == FX_BM26 ) 
+		{
+			packet[5] &= 0xC0;
+			packet[5] += 0x40;
+			// BM26 P51=>0:beginner(6G), 1:mid(3D), 2:expert(Gyro off) 
+			packet[5] |= (Channel_data[CH6] < CHANNEL_MIN_COMMAND ? 0x08 : (Channel_data[CH6] > CHANNEL_MAX_COMMAND ? 0x0C : 0x0A));
+			packet[6] = GET_FLAG( CH5_SW, 0x20)		// 6G Roll
+        			  | GET_FLAG(!CH7_SW, 0x08)		// Light control switch, default on
+            		  | GET_FLAG(!CH8_SW, 0x10)		// Turn signal switch, default on
+        			  | GET_FLAG( CH9_SW, 0x01);	// Gyro Calibration
+    	}  
 	}
 	else // FX816 & FX620
 	{
@@ -142,7 +162,7 @@ static void __attribute__((unused)) FX_send_packet()
 			packet[5] = 0xAB;	// Is it based on ID??
 		}
 	}
-	else // FX9630 & FX_Q560 & FX_QF012
+	else // FX9630 & FX_Q560 & FX_QF012 & FX_BM26
 	{
 		if(IS_BIND_IN_PROGRESS)
 		{
@@ -164,6 +184,8 @@ static void __attribute__((unused)) FX_send_packet()
 		val = val ^ 0xFF;
 	packet[last_packet_idx]=val;
 
+	if ( IS_BIND_IN_PROGRESS && sub_protocol == FX_BM26 ) packet[7] = packet[6];
+	
 	//Debug
 	#if 0
 		for(uint8_t i=0;i<packet_length;i++)
@@ -194,6 +216,13 @@ static void __attribute__((unused)) FX_RF_init()
 		packet_period = FX620_BIND_PACKET_PERIOD;
 		packet_length = FX620_PAYLOAD_SIZE;
 	}
+	else if (sub_protocol == FX_BM26)
+	{
+		XN297_SetTXAddr((uint8_t *)"\x12\x34\x10\x10", 4); 
+    	XN297_RFChannel(FX_BM26_BIND_CHANNEL); 
+    	packet_period = FX_BM26_PACKET_PERIOD;
+    	packet_length = FX9630_PAYLOAD_SIZE;
+	}
 	else // FX9630 & FX_Q560 & FX_QF012
 	{
 		XN297_SetTXAddr((uint8_t *)"\x56\x78\x90\x12", 4);
@@ -226,10 +255,10 @@ static void __attribute__((unused)) FX_initialize_txid()
 		for(uint8_t i=1;i<FX_NUM_CHANNELS;i++)
 			hopping_frequency[i] = i*10 + hopping_frequency[0];
 	}
-	else // FX9630 & FX_Q560 & FX_QF012
+	else // FX9630 & FX_Q560 & FX_QF012 & FX_BM26
 	{
 		//??? Need to find out how the first RF channel is calculated ???
-		hopping_frequency[0] = 0x13;
+		hopping_frequency[0] = sub_protocol == FX_BM26? 0x0C : 0x13;
 		//Other 2 RF channels are sent during the bind phase so they can be whatever
 		hopping_frequency[1] = RX_num & 0x0F + 0x1A;
 		hopping_frequency[2] = rx_tx_addr[3] & 0x0F + 0x38;
@@ -245,7 +274,8 @@ static void __attribute__((unused)) FX_initialize_txid()
 			//memcpy(rx_tx_addr,(uint8_t*)"\x38\xC7\x6D\x8D", 4);
 			//memcpy(hopping_frequency,"\x0D\x20\x3A", FX9630_NUM_CHANNELS);
 		#endif
-	}
+		// BM26 rx_tx_addr: "\x17\x03\x00\x00", hopping_frequency: 0x0C,0x30,0x43(12,48,67)
+	} 
 }
 
 uint16_t FX_callback()
@@ -288,9 +318,11 @@ uint16_t FX_callback()
 					debug("RX");
 					if(XN297_ReadPayload(packet_in, FX_QF012_RX_PAYLOAD_SIZE))
 					{//Good CRC
-						//packets: A5 00 11 -> A5 01 11
 						telemetry_link = 1;
-						v_lipo1 = packet_in[1] ? 60:81;		// low voltage 3.7V
+						if ( sub_protocol == FX_BM26 )
+							v_lipo1 = packet_in[0] <  packet_in[2] ? 60:81;	// packets: AA 00 55 -> 55 00 AA = low voltage 3.7V
+						else
+							v_lipo1 = packet_in[1] ? 60:81;					// packets: A5 00 11 -> A5 01 11 = low voltage 3.7V
 						#if 0
 							for(uint8_t i=0; i < FX_QF012_RX_PAYLOAD_SIZE; i++)
 								debug(" %02X", packet_in[i]);

Multiprotocol/Hontai_nrf24l01.ino

@@ -78,7 +78,8 @@ static void __attribute__((unused)) HONTAI_send_packet()
 				packet[i+3] = convert_channel_16b_limit(CH_TAER[i],0x28,0xD8);
 			packet[6] ^= 0xFF;	//Reverse rudder
 			//flags
-			packet[1] =  GET_FLAG(CH8_SW, 0x04);	//Gyro calibration (momentary)
+			packet[1] =  GET_FLAG(CH8_SW, 0x04)		//Gyro calibration (momentary)
+						|GET_FLAG(CH11_SW, 0x10);	//XK K270 optical flow switch
 			//			|GET_FLAG(CH_SW, 0x08)		//Unk long press second top right button (momentary)
 			//			|GET_FLAG(CH_SW, 0x10)		//Unk short press second top right button (toggle)
 			//			|GET_FLAG(CH_SW, 0x40)		//Unk short press second top left button (momentary)

Multiprotocol/KF606_ccnrf.ino

@@ -48,32 +48,19 @@ static void __attribute__((unused)) KF606_send_packet()
 		hopping_frequency_no ^= 1;			// 2 RF channels
 
 		packet[0] = 0x55;
-		packet[1] = convert_channel_8b(THROTTLE);					// 0..255
+		if(sub_protocol == KF606_ZCZ50) len--;
+		packet[len-3] = convert_channel_8b(THROTTLE);									// 0..255
 		// Deadband is needed on aileron, 40 gives +-6%
-		switch(sub_protocol)
-		{
-			case KF606_KF606:
-				packet[2] = convert_channel_8b_limit_deadband(AILERON,0x20,0x80,0xE0,40);	// Aileron: Max values:20..80..E0, Low rates:50..80..AF, High rates:3E..80..C1
-				packet[3] = convert_channel_16b_limit(CH5,0xC1,0xDF);						// Aileron trim must be on a separated channel C1..D0..DF
-				break;
-			case KF606_MIG320:
-				packet[2] = convert_channel_8b_limit_deadband(AILERON,0x00,0x80,0xFF,40);	// Aileron: High rate:2B..80..DA
-				packet[3] = convert_channel_16b_limit(CH5,0x01,0x1F);						// Aileron trim must be on a separated channel 01..10..1F
-				packet[3] += (packet[2]-0x80)>>3;											// Drive trims for more aileron authority
-				if(packet[3] > 0x80)
-					packet[3] = 0x01;
-				else if(packet[3] > 0x1F)
-					packet[3] = 0x1F;
-				packet[3] |= GET_FLAG(CH6_SW, 0xC0);										// 0xC0 and 0xE0 are both turning the LED off, not sure if there is another hidden feature
-				break;
-			case KF606_ZCZ50:
-				len--;																		// uses only 3 bytes of payload
-				packet[0] = packet[1];														// Throttle: 0x00..0xFF
-				packet[1] = convert_channel_8b_limit_deadband(AILERON,0x20,0x80,0xE0,40);	// Aileron: Max values:20..80..E0, low rate 0x52..0x80..0xB1, high rate: 0x41..0x80..0xC3.
-				packet[2] = convert_channel_16b_limit(CH5,0x01,0x1F);						// Trim: 0x01..0x10..0x1F
-				packet[2] |= GET_FLAG(CH6_SW, 0xC0);										// Unknown: 0x00 or 0xC0. Left top switch on original TX changes nothing on my plane. Maybe ON/OFF for main motor?
-				break;
-		}
+		packet[len-2] = convert_channel_8b_limit_deadband(AILERON,0x00,0x80,0xFF,40);	// Aileron: High rate:2B..80..DA
+		uint8_t p3;
+		p3 = convert_channel_8b(CH5)>>3;												// Aileron trim must be on a separated channel 01..10..1F
+		p3 += (packet[2]-0x80)>>3;														// Drive trims for more aileron authority
+		if(p3 > 0x80)
+			p3 = 0x01;
+		else if(p3 > 0x1F)
+			p3 = 0x1F;
+		p3 |= GET_FLAG(CH6_SW, 0xC0);													// 0xC0 and 0xE0 are both turning the LED off, not sure if there is another hidden feature
+		packet[len-1] = p3;
 	}
 
 	if(sub_protocol == KF606_MIG320)

Multiprotocol/Multi.txt

@@ -55,7 +55,7 @@
 55,Frsky_RX,Multi,CloneTX,EraseTX,CPPM
 56,AFHDS2A_RX,Multi,CPPM
 57,HoTT,Sync,No_Sync
-58,FX,816,620,9630,Q560,QF012
+58,FX,FX816,FX620,9630,Q560,QF012,BM26,FX818
 59,Bayang_RX,Multi,CPPM
 60,Pelikan,Pro,Lite,SCX24
 61,EazyRC
@@ -102,3 +102,4 @@
 104,KAMTOM
 105,Shenqi2
 106,WL91x
+107,WPL

Multiprotocol/Multi_Protos.ino

@@ -188,7 +188,7 @@ const char STR_SUBTYPE_JJRC345[] =    "\x08""JJRC345\0""SkyTmblr";
 const char STR_SUBTYPE_MOULDKG[] =    "\x05""A4444""D4444""A664\0";
 const char STR_SUBTYPE_KF606[] =      "\x06""KF606\0""MIG320""ZCZ50\0";
 const char STR_SUBTYPE_E129[] =       "\x04""E129""C186";
-const char STR_SUBTYPE_FX[] =         "\x05""816\0 ""620\0 ""9630\0""Q560\0""QF012";
+const char STR_SUBTYPE_FX[] =         "\x05""FX816""FX620""9630\0""Q560\0""QF012""BM26\0""FX818";
 const char STR_SUBTYPE_SGF22[] =      "\x04""F22\0""F22S""J20\0""CX10";
 const char STR_SUBTYPE_JIABAILE[] =   "\x04""Std\0""Gyro";
 #define NO_SUBTYPE		nullptr
@@ -345,7 +345,7 @@ const mm_protocol_definition multi_protocols[] = {
 		{PROTO_FUTABA,     STR_FUTABA,    STR_SUBTYPE_FUTABA,    1, OPTION_RFTUNE,  1, 1, SW_CC2500, SFHSS_init,      SFHSS_callback      },
 	#endif
 	#if defined(FX_NRF24L01_INO)
-		{PROTO_FX,         STR_FX,        STR_SUBTYPE_FX,        5, OPTION_NONE,    0, 0, SW_NRF,    FX_init,         FX_callback         },
+		{PROTO_FX,         STR_FX,        STR_SUBTYPE_FX,        7, OPTION_NONE,    0, 0, SW_NRF,    FX_init,         FX_callback         },
 	#endif
 	#if defined(FY326_NRF24L01_INO)
 		{PROTO_FY326,      STR_FY326,     STR_SUBTYPE_FY326,     2, OPTION_NONE,    0, 0, SW_NRF,    FY326_init,      FY326_callback      },

Multiprotocol/Multiprotocol.h

@@ -19,7 +19,7 @@
 #define VERSION_MAJOR		1
 #define VERSION_MINOR		3
 #define VERSION_REVISION	4
-#define VERSION_PATCH_LEVEL	52
+#define VERSION_PATCH_LEVEL	55
 
 #define MODE_SERIAL 0
 
@@ -493,6 +493,8 @@ enum FX
     FX9630          = 2,
 	FX_Q560			= 3,
 	FX_QF012		= 4,
+	FX_BM26			= 5,
+	FX818			= 6,
 };
 enum SGF22
 {

Multiprotocol/TRAXXAS_cyrf6936.ino

@@ -404,7 +404,7 @@ RX:	0x02	0x4A	0xA3	0x2D	0x1A	0x49	0xFE	0x06	0x00	0x00	0x02	0x01	0x06	0x06	0x00	0
 TX:	0x02	0x65	0xE2	0x5E	0x55	0x4D	0xFE	0xEE	0x00	0x00	0x01	0x01	0x06	0x05	0x00	0x00
 Notes:
  - RX cyrfmfg_id is 0x4A,0xA3,0x2D,0x1A,0x49,0xFE and TX cyrfmfg_id is 0x65,0xE2,0x5E,0x55,0x4D,0xFE
- - P[7] changes from 0x06 to 0xEE but not needed to complete the bind -> doesn't care??
+ - P[7] = RX SOP code index, changes from 0x06 to 0xEE but not needed to complete the bind -> doesn't care??
  - P[8] RF channel - 1 (on packets type 0x03)
  - P[9] 0x00 unchanged??
  - P[10] needs to be set to 0x01 to complete the bind -> normal packet P[0]??
@@ -474,4 +474,123 @@ Traxxas TQ 1st generation
 -------------------------
 https://github.com/pascallanger/DIY-Multiprotocol-TX-Module/issues/967#issuecomment-2079038576
 */
+/*
+Traxxas TQi
+-------------------------
+Unknown 3 first packets:
+CHANNEL:	0x2B
+SOP_CODE:	0x3C	0x37	0xCC	0x91	0xE2	0xF8	0xCC	0x91
+CRC_SEED_LSB:	0x5A
+CRC_SEED_MSB:	0x5A
+RX: 0xA0	0x1F	0x60	0x58	0x34	0x44	0x1C	0x11	0xA5	0x72	0x8D	0x9D	0xEA	0x49	0x2B	0xE2
+RX: 0xD3	0x53	0xD4	0x45	0x1B	0x6F	0x75	0x42	0xEF	0x8A	0xD2	0x24	0x8E	0xF0	0x05	0x6C
+RX: 0xAA	0xD7	0xD7	0x43	0x0F	0x2F	0x02	0x8F	0x06	0x54	0x3A	0x35	0xF5	0xCF	0x0F	0x82
+
+Packets 0x02: Bind learn TX/RX addresses same as TQ 2nd:
+CHANNEL:	0x2B
+SOP_CODE:	0x3C	0x37	0xCC	0x91	0xE2	0xF8	0xCC	0x91
+CRC_SEED_LSB:	0x5A
+CRC_SEED_MSB:	0x5A
+RX:	0x02	0x5B	0xE9	0x7E	0x14	0xF1	0xFE	0x0D	0x00	0x00	0x02	0x02	0x00	0x26	0x00	0x00
+TX:	0x02	0xE0	0xAC	0x7F	0x14	0xF1	0xFE	0x00	0x00	0x00	0x01	0x02	0x00	0x51	0x00	0x00
+
+Notes:
+ - P[1..6] = RX cyrfmfg_id is 0x5B,0xE9,0x7E,0x14,0xF1,0xFE and TX cyrfmfg_id is 0xE0,0xAC,0x7F,0x14,0xF1,0xFE
+ - P[7] RX SOP code index, changes from 0x0D to 0x00 (but not needed to complete the bind -> doesn't care??)
+ - P[8] RF channel - 1 (on packets type 0x03)
+ - P[9] 0x00 unchanged??
+ - P[10] needs to be set to 0x01 to complete the bind -> normal packet P[0]??
+ - P[11] unchanged ?? (-> no bind if set to 0x00 or 0x81)
+ - P[12] unchanged ?? (-> no bind if set to 0x05 or 0x86)
+ - P[13] changes from 0x26 to 0x51 (but not needed to complete the bind -> doesn't care??)
+ - P[14..15]=0x00 unchanged??
+ 
+Next steps:
+Packets 0x08: ???
+TX: 0x08	0x00	0x03	0x14	0xFD	0x3E	0x28	0xB9	0xCA	0x48	0x76	0x4E	0x00	0x51	0x00	0x00
+TX: 0x08	0x00	0x02	0x14	0xFD	0x3E	0x28	0xB9	0xCA	0x48	0x76	0x4E	0x00	0x51	0x00	0x00
+TX: 0x08	0x00	0x01	0x14	0xFD	0x3E	0x28	0xB9	0xCA	0x48	0x76	0x4E	0x00	0x51	0x00	0x00
+RX: 0x08	0x00	0x03	0x14	0xFD	0x24	0x20	0xB8	0xCA	0x48	0x76	0x4E	0x00	0x26	0x00	0x00
+RX: 0x08	0x00	0x01	0x14	0xFD	0x24	0x20	0xB8	0xCA	0x48	0x76	0x4E	0x00	0x26	0x00	0x00
+P[1] index
+P[2] sequence number
+
+Packets 0x09: ???
+TX: 0x09	0x00	0x03	0xEE	0x12	0x49	0x57	0x1F	0x4B	0x60	0x6B	0x4D	0x14	0xEF	0x69	0xC4
+TX: 0x09	0x00	0x02	0xEE	0x12	0x49	0x57	0x1F	0x4B	0x60	0x6B	0x4D	0x14	0xEF	0x69	0xC4
+TX: 0x09	0x00	0x01	0xEE	0x12	0x49	0x57	0x1F	0x4B	0x60	0x6B	0x4D	0x14	0xEF	0x69	0xC4
+TX: 0x09	0x01	0x03	0xB2	0x63	0x43	0x25	0x22	0x4D	0xA1	0x15	0xFE	0xBA	0x7D	0x67	0x3E
+TX: 0x09	0x01	0x02	0xB2	0x63	0x43	0x25	0x22	0x4D	0xA1	0x15	0xFE	0xBA	0x7D	0x67	0x3E
+TX: 0x09	0x01	0x01	0xB2	0x63	0x43	0x25	0x22	0x4D	0xA1	0x15	0xFE	0xBA	0x7D	0x67	0x3E
+TX: 0x09	0x02	0x03	0xCB	0xBE	0xA6	0xD1	0xCD	0x23	0xA1	0x15	0xFE	0xBA	0x7D	0x67	0x3E
+TX: 0x09	0x02	0x02	0xCB	0xBE	0xA6	0xD1	0xCD	0x23	0xA1	0x15	0xFE	0xBA	0x7D	0x67	0x3E
+TX: 0x09	0x02	0x01	0xCB	0xBE	0xA6	0xD1	0xCD	0x23	0xA1	0x15	0xFE	0xBA	0x7D	0x67	0x3E
+RX: 0x09	0x00	0x03	0x90	0x24	0x93	0x08	0x41	0xC7	0x7F	0x59	0xB4	0xE3	0x25	0x77	0xB5
+RX: 0x09	0x00	0x01	0x90	0x24	0x93	0x08	0x41	0xC7	0x7F	0x59	0xB4	0xE3	0x25	0x77	0xB5
+RX: 0x09	0x01	0x02	0x88	0xFA	0x4D	0xFB	0x33	0xD4	0xFE	0x5F	0x1C	0xA9	0x0B	0x7A	0xE6
+RX: 0x09	0x02	0x03	0x86	0xAF	0xD0	0x91	0xF6	0xDD	0xFE	0x5F	0x1C	0xA9	0x0B	0x7A	0xE6
+RX: 0x09	0x02	0x01	0x86	0xAF	0xD0	0x91	0xF6	0xDD	0xFE	0x5F	0x1C	0xA9	0x0B	0x7A	0xE6
+P[1] index
+P[2] sequence number
+
+Switch to normal mode:
+SOP_CODE:	0xD2	0x8F	0xB1	0x2A	0xEF	0x64	0xB0	0x2A
+CRC_SEED_LSB:	0x85
+CRC_SEED_MSB:	0xC3
+CHANNEL:	0x05
+TX: 0x01	0x00	0x02	0xF5	0x02	0x9E	0x00	0x00	0x00	0x00	0x00	0x00	0x02	0x99	0x67	0x3E
+Normal content except P[14]&P[15] = 0x67&0x3E from previous packet sent
+
+SOP_CODE:	0x97	0xE5	0x14	0x72	0x7F	0x1A	0x14	0x72
+CRC_SEED_LSB:	0xA5
+CRC_SEED_MSB:	0xA5
+CHANNEL:	0x22
+RX: 0x04	0x5B	0xE9	0x7E	0x14	0xF1	0xFE	0x0D	0xDD	0xFE	0x02	0x02	0x00	0x26	0x7A	0xE6
+RX packets 0x04: RX identity ?
+P[1..6] = RX cyrfmfg_id 0x5B,0xE9,0x7E,0x14,0xF1,0xFE
+P[7] = SOP index
+P[8] = unknown
+P[9] = unknown
+P[10] = same value as bind 0x02
+P[11] = same value as bind 0x02
+P[12] = same value as bind 0x00
+P[13] = same value as bind 0x26
+P[14] = unknown
+P[15] = unknown
+
+SOP_CODE:	0xD2	0x8F	0xB1	0x2A	0xEF	0x64	0xB0	0x2A
+CRC_SEED_LSB:	0x85
+CRC_SEED_MSB:	0xC3
+CHANNEL:	0x05
+TX: 0x14	0x00	0x03	0xF5	0x02	0x9E	0x00	0x00	0x00	0x00	0x00	0x00	0x02	0x99	0x67	0x3E
+TX: 0x14	0x00	0x02	0xF5	0x02	0x9E	0x00	0x00	0x00	0x00	0x00	0x00	0x02	0x99	0x67	0x3E
+TX: 0x14	0x00	0x01	0xF5	0x02	0x9E	0x00	0x00	0x00	0x00	0x00	0x00	0x02	0x99	0x67	0x3E
+RX: 0x14	0x00	0x03	0x22	0xEC	0x42	0x9B	0xD7	0x99	0x3B	0xBB	0x85	0x17	0x41	0x67	0xA0
+RX: 0x14	0x00	0x01	0x22	0xEC	0x42	0x9B	0xD7	0x99	0x3B	0xBB	0x85	0x17	0x41	0x67	0xA0
+RX: 0x14	0x01	0x02	0x22	0xEF	0x42	0x9C	0xCA	0xFB	0x39	0xBB	0x85	0x17	0x41	0x67	0xA0
+TX packets 0x14 same as packets 0x01 with a sequence number on P[2]
+RX packets 0x14 unknown content
+
+Packets 0x01 & 0x07: normal and telemetry request/answer
+TX: 0x01	0x00	0x02	0xF5	0x02	0x9E	0x00	0x00	0x00	0x00	0x00	0x00	0x02	0x99	0x00	0x00
+TX: 0x07	0x00	0x02	0xF5	0x02	0x9E	0x00	0x00	0x00	0x00	0x00	0x00	0x02	0x99	0x00	0x00
+RX: 0x07	0x01	0x00	0x00	0x00	0x00	0x00	0x00	0xFB	0x00	0x00	0x85	0x17	0x41	0x67	0xA0
+TX: 0x01	0x00	0x02	0xF5	0x02	0x9E	0x00	0x00	0x00	0x00	0x00	0x00	0x02	0x99	0x00	0x00
+TX: 0x07	0x00	0x02	0xF5	0x02	0x9E	0x00	0x00	0x00	0x00	0x00	0x00	0x02	0x99	0x00	0x00
+RX: 0x07	0x01	0x00	0x00	0x00	0x11	0x49	0xC8	0xFB	0x00	0x00	0x85	0x17	0x41	0x67	0xA0
+TX: 0x01	0x00	0x02	0xF5	0x02	0x9E	0x00	0x00	0x00	0x00	0x00	0x00	0x02	0x99	0x00	0x00
+TX: 0x07	0x00	0x02	0xF5	0x02	0x9E	0x00	0x00	0x00	0x00	0x00	0x00	0x02	0x99	0x00	0x00
+RX: 0x07	0x01	0x00	0x00	0x00	0x12	0xDC	0x20	0xFB	0x00	0x00	0x85	0x17	0x41	0x67	0xA0
+TX packets 0x07: request for telemetry
+RX packets 0x07: unknown
+
+CRC calc same as TQ 2nd:
+TX ID: 0xE0,0xAC,0x7F,0x14,0xF1,0xFE
+RX ID: 0x5B,0xE9,0x7E,0x14,0xF1,0xFE CRC 0x85 0xC3 => CRC: E0-5B=85 AC-E9=C3
+SOP index same as TQ 2nd:
+SOP index=0x0D, SOP code= 0xD2, 0x8F, 0xB1, 0x2A, 0xEF, 0x64, 0xB0, 0x2A 
+
+*/
+
+
 #endif

Multiprotocol/Telemetry.ino

@@ -887,7 +887,7 @@ void TelemetryUpdate()
 			t += TXBUFFER_SIZE - h ;
 		else
 			t -= h ;
-		if ( t < 32 )
+		if ( t < 48 ) //32 )
 		{
 			debugln("TEL_BUF_FULL %d",t);
 			return ;

Multiprotocol/WPL_nrf24l01.ino

@@ -131,7 +131,7 @@ P[3..7] = Normal address
 P[8] = 00 ??
 P[9] = 08 ?? not bound?, Throttle and Steering rate low, Headlights on
 P[10..14] = 00 ??
-P[15] = sum(P[0..14])+66 why 66...
+P[15] = sum(P[0..14])+66 why 66? 66=(94+16)^CC...
 
 Normal packet
 -----------
@@ -154,5 +154,5 @@ P[9] = 80 ?? bound?, Throttle and Steering rate low, Headlights off
       |04 -> Throttle rate high
       |08 -> Headlights on
 P[10..14] = 00 ??
-P[15] = sum(P[0..14])+66 why 66...
+P[15] = sum(P[0..14])+66 why 66? 66=(94+16)^CC...
 */

Multiprotocol/XK2_ccnrf.ino

@@ -86,7 +86,8 @@ static void __attribute__((unused)) XK2_send_packet()
 			packet[5] |= 0x10;											//Gyro off (senior mode)
 		else if(Channel_data[CH6] > CHANNEL_MIN_COMMAND)
 			packet[5] |= 0x08;											//3D
-		//Requiest telemetry flag
+		packet[5] |= GET_FLAG(CH9_SW, 0x04);							//Sky Viper Vector stunt flag
+		//Request telemetry flag
 		packet[6] = 0x01;
 		//RXID checksum
 		packet[7] = crc8;												//Sum RX_ID[0..2]

Multiprotocol/XN297Dump_nrf24l01.ino

@@ -22,7 +22,9 @@
 #include "iface_xn297.h"
 
 // Parameters which can be modified
-#define XN297DUMP_PERIOD_SCAN		50000 	// 25000
+#define XN297DUMP_PERIOD_FAST_SCAN	50000	// 50000
+#define XN297DUMP_PERIOD_SLOW_SCAN	100000 	// 75000
+#define XN297DUMP_MAX_PACKET		50 		// 20
 #define XN297DUMP_MAX_RF_CHANNEL	84		// Default 84
 
 // Do not touch from there
@@ -38,6 +40,7 @@ boolean ack;
 uint8_t pid;
 uint8_t bitrate;
 uint8_t old_option;
+uint32_t scan_counter;
 
 static void __attribute__((unused)) XN297Dump_RF_init()
 {
@@ -195,10 +198,10 @@ static uint16_t XN297Dump_callback()
 	{
 		if(sub_protocol<XN297DUMP_AUTO)
 		{
-			if(option==0xFF && bind_counter>XN297DUMP_PERIOD_SCAN)
+			if(option==0xFF && scan_counter>XN297DUMP_PERIOD_SLOW_SCAN)
 			{	// Scan frequencies
 				hopping_frequency_no++;
-				bind_counter=0;
+				scan_counter=0;
 			}
 			if(hopping_frequency_no!=rf_ch_num)
 			{	// Channel has changed
@@ -294,10 +297,10 @@ static uint16_t XN297Dump_callback()
 					phase++;
 					break;
 				case 1:
-					if(bind_counter>XN297DUMP_PERIOD_SCAN)
+					if(scan_counter>XN297DUMP_PERIOD_FAST_SCAN)
 					{	// Scan frequencies
 						hopping_frequency_no++;
-						bind_counter=0;
+						scan_counter=0;
 						if(hopping_frequency_no>XN297DUMP_MAX_RF_CHANNEL)
 						{
 							hopping_frequency_no=0;
@@ -367,7 +370,7 @@ static uint16_t XN297Dump_callback()
 								debugln("\r\n--------------------------------");
 								phase=2;
 								debugln("Identifying all RF channels in use.");
-								bind_counter=0;
+								scan_counter=0;
 								hopping_frequency_no=0;
 								rf_ch_num=0;
 								packet_count=0;
@@ -389,11 +392,11 @@ static uint16_t XN297Dump_callback()
 					}
 					break;
 				case 2:
-					if(bind_counter>XN297DUMP_PERIOD_SCAN)
+					if(scan_counter>XN297DUMP_PERIOD_SLOW_SCAN)
 					{	// Scan frequencies
 						hopping_frequency_no++;
-						bind_counter=0;
-						if(packet_count && packet_count<=20)
+						scan_counter=0;
+						if(packet_count && packet_count<=XN297DUMP_MAX_PACKET)
 							debug("\r\nTrying RF channel: ");
 						packet_count=0;
 						if(hopping_frequency_no>XN297DUMP_MAX_RF_CHANNEL)
@@ -438,7 +441,7 @@ static uint16_t XN297Dump_callback()
 							hopping_frequency_no=0;
 							phase=3;
 							packet_count=0;
-							bind_counter=0;
+							scan_counter=0;
 							debugln("Time between CH:%d and CH:%d",hopping_frequency[compare_channel],hopping_frequency[hopping_frequency_no]);
 							time_rf[hopping_frequency_no]=0xFFFFFFFF;
 							XN297_RFChannel(hopping_frequency[compare_channel]);
@@ -495,9 +498,9 @@ static uint16_t XN297Dump_callback()
 									debug(" %02X",packet[i]);
 								packet_count++;
 								nbr_rf[rf_ch_num-1]=packet_count;
-								if(packet_count>20)
+								if(packet_count>XN297DUMP_MAX_PACKET)
 								{//change channel
-									bind_counter=XN297DUMP_PERIOD_SCAN+1;
+									scan_counter=XN297DUMP_PERIOD_SLOW_SCAN+1;
 									debug("\r\nTrying RF channel: ");
 								}
 							}
@@ -509,10 +512,10 @@ static uint16_t XN297Dump_callback()
 					XN297Dump_overflow();
 					break;
 				case 3:
-					if(bind_counter>XN297DUMP_PERIOD_SCAN)
+					if(scan_counter>XN297DUMP_PERIOD_SLOW_SCAN)
 					{	// Scan frequencies
 						hopping_frequency_no++;
-						bind_counter=0;
+						scan_counter=0;
 						if(hopping_frequency_no>=rf_ch_num)
 						{
 							uint8_t next=0;
@@ -596,7 +599,7 @@ static uint16_t XN297Dump_callback()
 								packet_count++;
 								if(packet_count>24)
 								{
-									bind_counter=XN297DUMP_PERIOD_SCAN+1;
+									scan_counter=XN297DUMP_PERIOD_SLOW_SCAN+1;
 									packet_count=0;
 								}
 							}
@@ -941,7 +944,7 @@ static uint16_t XN297Dump_callback()
 				}
 			}
 		}
-		bind_counter++;
+		scan_counter++;
 		if(IS_RX_FLAG_on)					// Let the radio update the protocol
 		{
 			if(Update_All()) return 10000;	// New protocol selected
@@ -967,7 +970,7 @@ void XN297Dump_init(void)
 	if(address_length<3||address_length>5)
 		address_length=5;	//default
 	XN297Dump_RF_init();
-	bind_counter=0;
+	scan_counter=0;
 	rf_ch_num=0xFF;
 	prev_option=option^0x55;
 	phase=0;				// init

Multiprotocol/_Config.h

@@ -697,8 +697,10 @@ const PPM_Parameters PPM_prot[14*NBR_BANKS]=	{
 		FX816
 		FX620
 		FX9630
-		Q560
-		QF012
+		FX_Q560
+		FX_QF012
+		FX_BM26
+		FX818
 	PROTO_FY326
 		FY326
 		FY319

Protocols_Details.md

@@ -99,7 +99,7 @@ CFlie|AIR|38|CFlie||||||||NRF24L01|
 [FrskyX2](Protocols_Details.md#FRSKYX2---64)||64|CH_16|CH_8|EU_16|EU_8|Cloned|Cloned_8|||CC2500|
 [Frsky_RX](Protocols_Details.md#FRSKY_RX---55)||55|Multi|CloneTX|EraseTX|CPPM|||||CC2500|
 [Futaba/SFHSS](Protocols_Details.md#Futaba---21)||21|SFHSS||||||||CC2500|
-[FX](Protocols_Details.md#FX---58)||28|816|620|9630|Q560|QF012||||NRF24L01|
+[FX](Protocols_Details.md#FX---58)||58|FX816|FX620|9630|Q560|QF012|BM26|FX818||NRF24L01|
 [FY326](Protocols_Details.md#FY326---20)||20|FY326|FY319|||||||NRF24L01|
 [GD00X](Protocols_Details.md#GD00X---47)||47|GD_V1*|GD_V2*|||||||NRF24L01|XN297L
 [GW008](Protocols_Details.md#GW008---32)||32|||||||||NRF24L01|XN297
@@ -1144,9 +1144,9 @@ New generation of GD models
 ### Sub_protocol KF606 - *0*
 Model: KF606
 
-CH1|CH2|CH3|CH4|CH5
----|---|---|---|---
-A||T||TRIM
+CH1|CH2|CH3|CH4|CH5|CH6
+---|---|---|---|---|---
+A||T||TRIM|LED
 
 ### Sub_protocol MIG320 - *1*
 Model: Zhiyang MIG-320
@@ -1574,21 +1574,25 @@ If a CC2500 is installed it will be used for this sub protocol. Option in this c
 
 If only a NRF24L01 is installed then this sub protocol might be problematic because it is using the xn297L emulation with a transmission speed of 250kbps which doesn't work very well with every NRF24L01, this is an hardware issue with the authenticity and accuracy of the components.
 
-CH1|CH2|CH3|CH4|CH5|CH6|CH7|CH8
----|---|---|---|---|---|---|---
-A|E|T|R|Rate|Mode|Hover|Light
+CH1|CH2|CH3|CH4|CH5|CH6|CH7|CH8|CH9
+---|---|---|---|---|---|---|---|---
+A|E|T|R|Rate|Mode|Hover|Light|Stunt
 
 The plane does not need to be bound each time if it is powered on **after** the radio/protocol is on.
 
-Telemetry is supported. The plane sends a battery status of good->empty which is visible in A1 (good=8.4V->empty=7.1V) and RSSI gets a dummy value of 100.
+Telemetry is supported. The plane sends a battery status of good->empty which is visible in A1 (good=8.4V->empty=7.1V) and RSSI gets a dummy value of 100. For the Sky Viper Vector, the battery telemetry will still appear  in A1 with good=8.4V->empty=7.1V despite being a 1S plane with a switch good/bad in reality at 3.3V.
 
 The rudder trim is driven from the rudder channel to increase the range (Original TX rudder has no range once the motor has been turned on...).
 
 Mode: -100%=6G, 0%=3D, +100%=Gyro off (Senior mode)
 
+Stunt: Sky Viper Vector
+
 ### Sub_protocol X4 - *0*
 Transmitter: XK X4-A160, X5S, model: XK A160S, XK A280, XK A300
 
+Model: Sky Viper Vector
+
 ### Sub_protocol P10 - *1*
 Model: Park10 J3-CUB
 
@@ -1839,7 +1843,7 @@ FMODE and AUX7 have 4 positions: -100%..-50%=>0, -50%..5%=>1, 5%..50%=>2, 50%..1
 ## FX - *58*
 FEI XIONG
 
-### Sub_protocol 816 - *0*
+### Sub_protocol FX816 - *0*
 Model: FX816 P38, B17
 
 Only 8 TX IDs available
@@ -1848,7 +1852,7 @@ CH1|CH2|CH3|CH4
 ---|---|---|---
 A|-|T|-
 
-### Sub_protocol 620 - *1*
+### Sub_protocol FX620 - *1*
 Model: FX620 SU35
 
 CH1|CH2|CH3|CH4
@@ -1890,6 +1894,26 @@ Gyro: -100%=6G, 0%=3D+Gyro, +100%=3D
 
 Reset: Restore fine tunning midpoint
 
+### Sub_protocol BM26 - *5*
+Model: BM26 P51
+
+Telemetry supported. The plane sends a battery status of good->empty which is visible in A1 (good=4.2V->empty=3.1V) and RSSI gets a dummy value of 100.
+
+CH1|CH2|CH3|CH4|CH5|CH6|CH7|CH8|CH9
+---|---|---|---|---|---|---|---|---
+A|E|T|R|FLIP|GYRO|LEDs|Turning Light switch|Calib
+
+Gyro: -100%=6G, 0%=3D+Gyro, +100%=3D
+
+### Sub_protocol FX818 - *6*
+Model: FX818/FX820/FX822/FX823
+
+Telemetry supported. The plane sends a battery status of good->empty which is visible in A1 (good=4.2V->empty=3.1V) and RSSI gets a dummy value of 100.
+
+CH1|CH2|CH3|CH4
+---|---|---|---
+A|-|T|-
+
 ## FY326 - *20*
 
 ### Sub_protocol FY326 - *0*
@@ -2003,14 +2027,16 @@ ARM|
 
 ### Sub_protocol XKK170 - *3*
 
-Model: XK K170 UH-60L Black hawk
+Model: XK K170 UH-60L Black hawk, XK K270 UH-60L
 
-CH1|CH2|CH3|CH4|CH5|CH6|CH7|CH8|CH9|CH10
----|---|---|---|---|---|---|---|---|---
-A|E|T|R|RATE|EMERGENCY|TAKE_OFF/LANDING|CALIB|TrimA|TrimE
+CH1|CH2|CH3|CH4|CH5|CH6|CH7|CH8|CH9|CH10|CH11
+---|---|---|---|---|---|---|---|---|---|---
+A|E|T|R|RATE|EMERGENCY|TAKE_OFF/LANDING|CALIB|TrimA|TrimE|Optical
 
 RATE: -100% Low, 0% Mid, +100% High
 
+Optic: enable/disable the optical flow sensor for K270
+
 ## JIABAILE - *102*
 
 ### Sub_protocol Std - *0*