Update Protocols_Details.md

Lua_scripts/MultiChan.txt

@@ -226,3 +226,4 @@
 61,0,EazyRC
 98,0,Kyosho3,ASF,0
 100,0,YuXiang,Std,0,Lock,Rate,Land,Manual,Flip,Mode,Pitch
+102,0,JIABAILE,Std,1,Speed,Light,Flash

Multiprotocol/JIABAILE_nrf24l01.ino

@@ -0,0 +1,315 @@
+/*
+ This project is free software: you can redistribute it and/or modify
+ it under the terms of the GNU General Public License as published by
+ the Free Software Foundation, either version 3 of the License, or
+ (at your option) any later version.
+
+Multiprotocol is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ GNU General Public License for more details.
+
+ You should have received a copy of the GNU General Public License
+ along with Multiprotocol.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#if defined(JIABAILE_NRF24L01_INO)
+
+#include "iface_xn297.h"
+
+//#define FORCE_JIABAILE_ORIGINAL_ID
+
+#define JIABAILE_PAYLOAD_SIZE			8
+#define JIABAILE_RX_PAYLOAD_SIZE		7
+#define JIABAILE_RF_NUM_CHANNELS		3
+#define JIABAILE_BIND_PACKET_PERIOD		12700
+#define JIABAILE_PACKET_PERIOD			2408
+#define JIABAILE_BIND_COUNT				2000
+#define JIABAILE_WRITE_TIME				1000
+
+enum {
+	JIABAILE_BIND=0,
+	JIABAILE_RX,
+	JIABAILE_DATA,
+};
+
+static uint8_t __attribute__((unused)) JIABAILE_channel(uint8_t num)
+{
+	uint8_t val=convert_channel_16b_limit(num,0,100);
+	if(val > 50+num)
+	{
+		packet[3] |= 0x01;
+		return val-50;
+	}
+	if(val < 50-num)
+	{
+		packet[3] |= 0x02;
+		return 50-val;
+	}
+	return 0;
+}
+
+static void __attribute__((unused)) JIABAILE_send_packet()
+{
+	hopping_frequency_no++;
+	if(hopping_frequency_no > 2)
+		hopping_frequency_no = 0;
+	XN297_Hopping(hopping_frequency_no);
+
+	memcpy(packet,rx_tx_addr,3);
+	memset(&packet[3], 0x00, 4);
+	if(IS_BIND_DONE)
+	{//Normal
+		packet[4] = convert_channel_16b_limit(RUDDER,0,50)-25;	//ST Trim
+		packet[6] = JIABAILE_channel(AILERON);					//ST
+		packet[3] ^= 0x03;										//Reverse ST channel
+		packet[3] <<= 2;										//Move ST channel where it should be
+		packet[5] = JIABAILE_channel(ELEVATOR);					//TH
+		packet[3] |= GET_FLAG(CH5_SW,  0x20)					//Low speed
+					|GET_FLAG(CH7_SW,  0x40)					//Flash light
+					|GET_FLAG(!CH6_SW,  0x80);					//Light
+		if(!CH5_SW && Channel_data[CH5] > CHANNEL_MIN_COMMAND)
+			packet[3] |= 0x10;									//Mid speed
+	}
+	packet[7] = 0x55 + hopping_frequency[hopping_frequency_no];
+	for(uint8_t i=0;i<JIABAILE_PAYLOAD_SIZE-1;i++)
+		packet[7] += packet[i];
+	// Send
+	XN297_SetPower();
+	XN297_SetTxRxMode(TX_EN);
+	XN297_WritePayload(packet, JIABAILE_PAYLOAD_SIZE);
+	#ifdef DEBUG_SERIAL
+		debug("H%d RF%d",hopping_frequency_no,hopping_frequency[hopping_frequency_no]);
+		for(uint8_t i=0; i < JIABAILE_PAYLOAD_SIZE; i++)
+			debug(" %02X", packet[i]);
+		debugln();
+	#endif
+}
+
+static void __attribute__((unused)) JIABAILE_initialize_txid()
+{
+	rx_tx_addr[0] = rx_tx_addr[3];
+	#ifdef FORCE_JIABAILE_ORIGINAL_ID
+		memcpy(rx_tx_addr,(uint8_t *)"\xCB\x03\xA5",3);
+		//memcpy(rx_tx_addr,(uint8_t *)"\x3D\x08\xA2",3);
+		//Normal frequencies are calculated from the car ID...
+		//memcpy(&hopping_frequency[3],(uint8_t *)"\x23\x2D\x4B",3);	//35,45,75
+		memcpy(&hopping_frequency[3],(uint8_t *)"\x24\x43\x4C",3);	//36,67,76
+	#endif
+	//Bind frequencies
+	memcpy(hopping_frequency,(uint8_t *)"\x07\x27\x45",3);	//7,39,69
+}
+
+static void __attribute__((unused)) JIABAILE_RF_init()
+{
+	XN297_Configure(XN297_CRCEN, XN297_SCRAMBLED, XN297_1M);
+	//Bind address
+	memcpy(rx_id,(uint8_t*)"\xA7\x07\x57\xA7\x26", 5);
+	XN297_SetTXAddr(rx_id, 5);
+	XN297_SetRXAddr(rx_id, JIABAILE_RX_PAYLOAD_SIZE);
+}
+
+uint16_t JIABAILE_callback()
+{
+	switch(phase)
+	{
+		case JIABAILE_BIND:
+			if(XN297_IsRX())
+			{
+				if(XN297_ReadPayload(packet_in, JIABAILE_RX_PAYLOAD_SIZE))
+				{//CRC OK
+					#ifdef DEBUG_SERIAL
+						debug("RX");
+						for(uint8_t i=0; i < JIABAILE_RX_PAYLOAD_SIZE; i++)
+							debug(" %02X", packet_in[i]);
+						debugln();
+					#endif
+					//RX: CB 03 A5 9D 05 A2 68
+					if(memcmp(packet_in,rx_tx_addr,3)==0)
+					{//TX ID match
+						//Check packet
+						uint8_t sum=0xAA + hopping_frequency[hopping_frequency_no];
+						for(uint8_t i=0; i < JIABAILE_RX_PAYLOAD_SIZE-1; i++)
+							sum+=packet_in[i];
+						if(sum==packet_in[6])
+						{
+							//Write the RXID in the address
+							memcpy(&rx_id[1],&packet_in[3],3);
+							XN297_SetTxRxMode(TXRX_OFF);
+							XN297_SetTXAddr(rx_id, 5);
+							//Set the normal frequencies
+							sum=packet_in[3]&0x07;
+							hopping_frequency[0] = (sum>4?30:8) + sum;
+							if(sum==4 || sum ==7)
+								hopping_frequency[0]++;
+							hopping_frequency[1] = 40 + sum;
+							if((sum & 0x06) == 0x06)
+								hopping_frequency[1] += 21;
+							hopping_frequency[2] = 70 + sum;
+							#ifdef DEBUG_SERIAL
+								debug("RF");
+								for(uint8_t i=0; i < 3; i++)
+									debug(" %d", hopping_frequency[i]);
+								debugln();
+							#endif
+							//Switch to normal mode
+							BIND_DONE;
+							phase = JIABAILE_DATA;
+						}
+			#ifdef DEBUG_SERIAL
+						else
+							debug("Wrong Sum");
+					}
+					else
+						debug("Wrong TX ID");
+				}
+				else
+					debug("Bad CRC");
+				debugln("");
+			#else
+					}
+				}
+			#endif
+			}
+			XN297_SetTxRxMode(TXRX_OFF);
+			JIABAILE_send_packet();
+			phase++;
+			return JIABAILE_WRITE_TIME;
+		case JIABAILE_RX:
+			//Wait for the packet transmission to finish
+			while(XN297_IsPacketSent()==false);
+			//Switch to RX
+			XN297_SetTxRxMode(TXRX_OFF);
+			XN297_SetTxRxMode(RX_EN);
+			phase = JIABAILE_BIND;
+			return JIABAILE_BIND_PACKET_PERIOD - JIABAILE_WRITE_TIME;
+		default:	//JIABAILE_DATA
+			#ifdef MULTI_SYNC
+				telemetry_set_input_sync(JIABAILE_PACKET_PERIOD);
+			#endif
+			JIABAILE_send_packet();
+			break;
+	}
+	return JIABAILE_PACKET_PERIOD;
+}
+
+void JIABAILE_init()
+{
+	BIND_IN_PROGRESS;	// Autobind protocol
+	JIABAILE_initialize_txid();
+	JIABAILE_RF_init();
+	phase = JIABAILE_BIND;
+	hopping_frequency_no = 0;
+}
+
+#endif
+/*
+// CAR RX debug code
+
+static void __attribute__((unused)) JIABAILE_RF_init()
+{
+	XN297_Configure(XN297_CRCEN, XN297_SCRAMBLED, XN297_1M);
+	//Bind address
+	memcpy(rx_id,(uint8_t*)"\xA7\x07\x57\xA7\x26", 5);
+	XN297_SetTXAddr(rx_id, 5);
+	XN297_SetRXAddr(rx_id, JIABAILE_PAYLOAD_SIZE);
+	XN297_RFChannel(7);
+	rx_tx_addr[0] = 0x00;
+	rx_tx_addr[1] = RX_num;
+	rx_tx_addr[2] = 0x00;
+}
+
+uint16_t JIABAILE_callback()
+{
+	switch(phase)
+	{
+		case JIABAILE_BIND:
+			if(XN297_IsRX())
+			{
+				if(XN297_ReadPayload(packet_in, JIABAILE_PAYLOAD_SIZE))
+				{//CRC OK
+					XN297_SetTxRxMode(TXRX_OFF);
+					#ifdef DEBUG_SERIAL
+						debug("RX Bind");
+						for(uint8_t i=0; i < JIABAILE_PAYLOAD_SIZE; i++)
+							debug(" %02X", packet_in[i]);
+						debugln();
+					#endif
+					memcpy(packet,packet_in,3);
+					memcpy(&packet[3],rx_tx_addr,3);
+					packet[6]=0xAA + 7;
+					for(uint8_t i=0; i < JIABAILE_RX_PAYLOAD_SIZE-1; i++)
+						packet[6]+=packet[i];
+					XN297_SetTxRxMode(TX_EN);
+					memcpy(&rx_id[1],rx_tx_addr,3);
+					bind_counter = 10;
+					phase = JIABAILE_RX;
+				}
+			}
+			return JIABAILE_WRITE_TIME;
+		case JIABAILE_RX:
+			if(bind_counter)
+			{
+				bind_counter--;
+				XN297_WritePayload(packet, JIABAILE_RX_PAYLOAD_SIZE);
+				#ifdef DEBUG_SERIAL
+					debug("TX Bind");
+					for(uint8_t i=0; i < JIABAILE_RX_PAYLOAD_SIZE; i++)
+						debug(" %02X", packet[i]);
+					debugln();
+				#endif
+				return JIABAILE_PACKET_PERIOD;
+			}
+			//Wait for the packet transmission to finish
+			//while(XN297_IsPacketSent()==false);
+			//Switch to RX
+			XN297_SetTxRxMode(TXRX_OFF);
+			XN297_SetRXAddr(rx_id, JIABAILE_PAYLOAD_SIZE);
+			hopping_frequency_no++;
+			if(hopping_frequency_no>84)
+				hopping_frequency_no = 0;
+			debug(".");
+			XN297_RFChannel(hopping_frequency_no);
+			XN297_SetTxRxMode(RX_EN);
+			phase = JIABAILE_DATA;
+			return JIABAILE_BIND_PACKET_PERIOD;
+		case JIABAILE_DATA:
+			if(XN297_IsRX())
+			{
+				debugln("");
+				if(XN297_ReadPayload(packet_in, JIABAILE_PAYLOAD_SIZE))
+				{//CRC OK
+					#ifdef DEBUG_SERIAL
+						debug("CH=%d=%02X P:",hopping_frequency_no,hopping_frequency_no);
+						for(uint8_t i=0; i < JIABAILE_PAYLOAD_SIZE; i++)
+							debug(" %02X", packet_in[i]);
+					#endif
+					//Check packet
+					uint8_t sum=0x55 + hopping_frequency_no;
+					for(uint8_t i=0; i < JIABAILE_PAYLOAD_SIZE-1; i++)
+						sum+=packet_in[i];
+					if(sum==packet_in[7])
+					{
+						debug("Good channel");
+					}
+					else
+						debug("Wrong Sum");
+				}
+				else
+					debug("Bad CRC");
+				debugln("");
+			}
+			phase = JIABAILE_RX;
+			break;
+	}
+	return JIABAILE_PACKET_PERIOD;
+}
+
+void JIABAILE_init()
+{
+	JIABAILE_RF_init();
+	XN297_SetTxRxMode(TXRX_OFF);
+	XN297_SetTxRxMode(RX_EN);
+	phase = JIABAILE_BIND;
+	hopping_frequency_no = 7;
+}
+*/

Multiprotocol/Multi.txt

@@ -97,3 +97,4 @@
 98,Kyosho3
 99,XK2
 100,YuXiang
+102,JIABAILE

Multiprotocol/Multi_Protos.ino

@@ -113,6 +113,7 @@ const char STR_EAZYRC[]     ="EazyRC";
 const char STR_KYOSHO3[]    ="Kyosho3";
 const char STR_YUXIANG[]    ="YuXiang";
 const char STR_PINECONE[]   ="PineCone";
+const char STR_JIABAILE[]	="JIABAILE";
 
 const char STR_SUBTYPE_FLYSKY[] =     "\x04""Std\0""V9x9""V6x6""V912""CX20";
 const char STR_SUBTYPE_HUBSAN[] =     "\x04""H107""H301""H501";
@@ -375,6 +376,9 @@ const mm_protocol_definition multi_protocols[] = {
 	#if defined(J6PRO_CYRF6936_INO)
 		{PROTO_J6PRO,      STR_J6PRO,     NO_SUBTYPE,            0, OPTION_NONE,    0, 1, SW_CYRF,   J6PRO_init,      J6PRO_callback      },
 	#endif
+	#if defined(JIABAILE_NRF24L01_INO)
+		{PROTO_JIABAILE,   STR_JIABAILE,  NO_SUBTYPE,            0, OPTION_NONE,    0, 0, SW_NRF,    JIABAILE_init,   JIABAILE_callback   },
+	#endif
 	#if defined(JJRC345_NRF24L01_INO)
 		{PROTO_JJRC345,    STR_JJRC345,   STR_SUBTYPE_JJRC345,   2, OPTION_NONE,    0, 0, SW_NRF,    JJRC345_init,    JJRC345_callback    },
 	#endif

Multiprotocol/Multiprotocol.h

@@ -19,7 +19,7 @@
 #define VERSION_MAJOR		1
 #define VERSION_MINOR		3
 #define VERSION_REVISION	4
-#define VERSION_PATCH_LEVEL	23
+#define VERSION_PATCH_LEVEL	24
 
 #define MODE_SERIAL 0
 
@@ -129,6 +129,7 @@ enum PROTOCOLS
 	PROTO_XK2		= 99,	// =>CC2500 & NRF24L01
 	PROTO_YUXIANG	= 100,	// =>NRF24L01
 	PROTO_PINECONE	= 101,	// =>CC2500 & NRF24L01
+	PROTO_JIABAILE	= 102,	// =>NRF24L01
 	
 	PROTO_NANORF	= 126,	// =>NRF24L01
 	PROTO_TEST		= 127,	// =>CC2500

Multiprotocol/Validate.h

@@ -323,6 +323,7 @@
 	#undef	H8_3D_NRF24L01_INO
 	#undef	HISKY_NRF24L01_INO
 	#undef	HONTAI_NRF24L01_INO
+	#undef	JIABAILE_NRF24L01_INO
 	#undef	JJRC345_NRF24L01_INO
 	#undef	KN_NRF24L01_INO
 	#undef	KYOSHO2_NRF24L01_INO
@@ -388,6 +389,7 @@
 	#undef	KYOSHO3_CYRF6936_INO
 	#undef	MOULDKG_NRF24L01_INO
 	#undef	SHENQI_NRF24L01_INO
+	#undef	JIABAILE_NRF24L01_INO
 #endif
 
 #ifdef MULTI_SURFACE

Multiprotocol/_Config.h

@@ -243,6 +243,7 @@
 #define	HISKY_NRF24L01_INO
 #define	HONTAI_NRF24L01_INO
 #define	H8_3D_NRF24L01_INO
+#define JIABAILE_NRF24L01_INO
 #define	JJRC345_NRF24L01_INO
 #define	KN_NRF24L01_INO
 #define	KYOSHO2_NRF24L01_INO
@@ -732,6 +733,8 @@ const PPM_Parameters PPM_prot[14*NBR_BANKS]=	{
 		NONE
 	PROTO_J6PRO
 		NONE
+	PROTO_JIABAILE
+		NONE
 	PROTO_JJRC345
 		JJRC345
 		SKYTMBLR

Protocols_Details.md

@@ -111,6 +111,7 @@ CFlie|38|CFlie||||||||NRF24L01|
 [HoTT](Protocols_Details.md#HoTT---57)|57|Sync|No_Sync|||||||CC2500|
 [Hubsan](Protocols_Details.md#HUBSAN---2)|2|H107|H301|H501||||||A7105|
 [J6Pro](Protocols_Details.md#J6Pro---22)|22|||||||||CYRF6936|
+[JIABAILE](Protocols_Details.md#JIABAILE---102)|102|||||||||NRF24L01|XN297
 [JJRC345](Protocols_Details.md#JJRC345---71)|71|JJRC345|SkyTmblr|||||||NRF24L01|XN297
 [JOYSWAY](Protocols_Details.md#JOYSWAY---84)|84|||||||||NRF24L01|XN297
 [KF606](Protocols_Details.md#KF606---49)|49|KF606|MIG320|ZCZ50||||||NRF24L01|XN297
@@ -1912,6 +1913,15 @@ ARM|
 
 ### Sub_protocol FQ777_951 - *3*
 
+## JIABAILE - *102*
+Autobind protocol
+
+CH1|CH2|CH3|CH4|CH5|CH6|CH7
+---|---|---|---|---|---|---
+ST|TH|-|ST_TRIM|SPEED|LIGHT|FLASH
+
+SPEED: -100% High, 0% Mid, +100% Low
+
 ## JJRC345 - *71*
 
 CH1|CH2|CH3|CH4|CH5|CH6|CH7|CH8|CH9|CH10|CH11