FX telemetry

Lua_scripts/MultiChan.txt

@@ -216,8 +216,9 @@
 85,0,E016H,Std,1,Stop,Flip,n-a,HLess,RTH
 87,0,IKEA
 89,0,LOSI
-90,0,MouldKg,Analog,0
-90,1,MouldKg,Digit,0
+90,0,MouldKg,A4444,0
+90,1,MouldKg,D4444,0
+90,2,MouldKg,A664,0
 91,0,Xerall,Tank,0,FlTa,TakLan,Rate,HLess,Photo,Video,TrimR,TrimE,TrimA
 93,0,Kyosho2,KT-17,0
 94,0,Scorpio

Multiprotocol/FX_nrf24l01.ino

@@ -38,11 +38,18 @@ Multiprotocol is distributed in the hope that it will be useful,
 #define FX9630_BIND_CHANNEL			51
 #define FX9630_PAYLOAD_SIZE			8
 #define FX9630_NUM_CHANNELS			3
+#define FX9630_WRITE_TIME			500
 
 //#define FORCE_FX620_ID
 //#define FORCE_FX9630_ID
 //#define FORCE_QIDI_ID
 
+enum 
+{
+	FX_DATA=0,
+	FX_RX,
+};
+
 static void __attribute__((unused)) FX_send_packet()
 {
 	static uint8_t trim_ch = 0;
@@ -52,21 +59,20 @@ static void __attribute__((unused)) FX_send_packet()
 	{
 		XN297_Hopping(hopping_frequency_no++);
 		if(sub_protocol >= FX9630)
-		{ // FX9630 & FX_Q560
-			XN297_SetTXAddr(rx_tx_addr, 4);
+		{ // FX9630 & FX_Q560 & FX_QF012
 			if (hopping_frequency_no >= FX9630_NUM_CHANNELS)
 			{
 				hopping_frequency_no = 0;
 				if(sub_protocol == FX9630)
 				{
 					trim_ch++;
-					if(trim_ch > 3) trim_ch = 0;
+					trim_ch &= 3;
 				}
-				else // FX_Q560, QF012
+				else // FX_Q560 & FX_QF012
 					trim_ch = 0;
 			}
 		}
-		else // FX816 and FX620
+		else // FX816 & FX620
 		{
 			hopping_frequency_no &= 0x03;
 		}
@@ -186,7 +192,7 @@ static void __attribute__((unused)) FX_RF_init()
 		packet_period = FX620_BIND_PACKET_PERIOD;
 		packet_length = FX620_PAYLOAD_SIZE;
 	}
-	else // FX9630 & FX_Q560
+	else // FX9630 & FX_Q560 & FX_QF012
 	{
 		XN297_SetTXAddr((uint8_t *)"\x56\x78\x90\x12", 4);
 		XN297_RFChannel(FX9630_BIND_CHANNEL);
@@ -218,15 +224,16 @@ static void __attribute__((unused)) FX_initialize_txid()
 		for(uint8_t i=1;i<FX_NUM_CHANNELS;i++)
 			hopping_frequency[i] = i*10 + hopping_frequency[0];
 	}
-	else // FX9630 & FX_Q560
+	else // FX9630 & FX_Q560 & FX_QF012
 	{
+		//??? Need to find out how the first RF channel is calculated ???
+		hopping_frequency[0] = 0x13;
+		//Other 2 RF channels are sent during the bind phase so they can be whatever
+		hopping_frequency[1] = RX_num & 0x0F + 0x1A;
+		hopping_frequency[2] = rx_tx_addr[3] & 0x0F + 0x38;
 		#ifdef FORCE_FX9630_ID
 			memcpy(rx_tx_addr,(uint8_t*)"\xCE\x31\x9B\x73", 4);
 			memcpy(hopping_frequency,"\x13\x1A\x38", FX9630_NUM_CHANNELS);		//Original dump=>19=0x13,26=0x1A,56=0x38
-		#else
-			hopping_frequency[0] = 0x13; // constant???
-			hopping_frequency[1] = RX_num & 0x0F + 0x1A;
-			hopping_frequency[2] = rx_tx_addr[3] & 0x0F + 0x38;
 		#endif
 		#ifdef FORCE_QIDI_ID
 			memcpy(rx_tx_addr,(uint8_t*)"\x23\xDC\x76\xA2", 4);
@@ -236,26 +243,78 @@ static void __attribute__((unused)) FX_initialize_txid()
 			//memcpy(rx_tx_addr,(uint8_t*)"\x38\xC7\x6D\x8D", 4);
 			//memcpy(hopping_frequency,"\x0D\x20\x3A", FX9630_NUM_CHANNELS);
 		#endif
-		//??? Need to find out how the first RF channel is calculated ???
 	}
 }
 
 uint16_t FX_callback()
 {
-	#ifdef MULTI_SYNC
-		telemetry_set_input_sync(packet_period);
-	#endif
-	if(bind_counter)
-		if(--bind_counter==0)
+	#ifdef FX_HUB_TELEMETRY
+		bool rx=false;
+		
+		switch(phase)
 		{
-			BIND_DONE;
-			if(sub_protocol == FX620)
-			{
-				XN297_SetTXAddr(rx_tx_addr, 3);
-				packet_period = FX620_PACKET_PERIOD;
-			}
+			case FX_DATA:
+				rx = XN297_IsRX();
+				XN297_SetTxRxMode(TXRX_OFF);
+	#endif
+				#ifdef MULTI_SYNC
+					telemetry_set_input_sync(packet_period);
+				#endif
+				if(bind_counter)
+					if(--bind_counter==0)
+					{
+						BIND_DONE;
+						if(sub_protocol == FX620)
+						{
+							XN297_SetTXAddr(rx_tx_addr, 3);
+							packet_period = FX620_PACKET_PERIOD;
+						}
+						else if(sub_protocol >= FX9630)
+						{ // FX9630 & FX_Q560 & FX_QF012
+							XN297_SetTXAddr(rx_tx_addr, 4);
+	#ifdef FX_HUB_TELEMETRY
+							XN297_SetRXAddr(rx_tx_addr,packet_length);
+	#endif
+						}
+					}
+				FX_send_packet();
+	#ifdef FX_HUB_TELEMETRY
+				if(sub_protocol < FX9630)
+					break;
+				if(rx)
+				{
+					debug("RX");
+					if(XN297_ReadPayload(packet_in, packet_length))
+					{//Good CRC
+						telemetry_link = 1;
+						//v_lipo1 = packet_in[1] == 0x03 ? 0x00:0xFF;		// low voltage
+						#if 1
+							for(uint8_t i=0; i < packet_length; i++)
+								debug(" %02X", packet_in[i]);
+						#endif
+					}
+					debugln();
+				}
+				phase++;
+				return FX9630_WRITE_TIME;
+			default: //FX_RX
+				/* { // Wait for packet to be sent before switching to receive mode
+					uint16_t start=(uint16_t)micros(), count=0;
+					while ((uint16_t)((uint16_t)micros()-(uint16_t)start) < 500)
+					{
+						if(XN297_IsPacketSent())
+							break;
+						count++;
+					}
+					debug("%d",count);
+				} */
+				//Switch to RX
+				XN297_SetTxRxMode(TXRX_OFF);
+				XN297_SetTxRxMode(RX_EN);
+				phase = FX_DATA;
+				return packet_period - FX9630_WRITE_TIME;
 		}
-	FX_send_packet();
+	#endif
 	return packet_period;
 }
 
@@ -266,6 +325,10 @@ void FX_init()
 	FX_RF_init();
 	hopping_frequency_no = 0;
 	bind_counter=FX_BIND_COUNT;
+	#ifdef FX_HUB_TELEMETRY
+		RX_RSSI = 100;		// Dummy value
+		phase = FX_DATA;
+	#endif
 }
 
 #endif

Multiprotocol/MouldKg_nrf24l01.ino

@@ -50,12 +50,19 @@ static void __attribute__((unused)) MOULDKG_send_packet()
 	else
 	{
 		uint8_t n = num_ch<<2;
-		if(sub_protocol == MOULDKG_ANALOG)
+		if(sub_protocol == MOULDKG_ANALOG4 || sub_protocol == MOULDKG_ANALOG6 )
 		{
 			packet[0] = 0x36;
-			uint8_t ch[]={ 1,0,2,3,4,5 };
+			const uint8_t ch[]={ 1,0,2,3,4,5 };
+			if(sub_protocol == MOULDKG_ANALOG6)
+				n += num_ch<<1;
 			for(uint8_t i=0;i<6;i++)
-				packet[i+4] = convert_channel_8b(ch[i]+n);
+			{
+				if(i > 3 && (sub_protocol == MOULDKG_ANALOG4 || i + n > 15))
+					packet[i+4] = 0x80;							//Centered channel
+				else
+					packet[i+4] = convert_channel_8b(ch[i]+n);
+			}
 			len = MOULDKG_PAYLOAD_SIZE_ANALOG;
 		}
 		else

Multiprotocol/Multi.txt

@@ -86,7 +86,7 @@
 87,IKEA
 88,WILLIFM
 89,Losi
-90,MouldKg,Analog,Digit
+90,MouldKg,A4444,D4444,A664
 91,Xerall
 92,MT99xx,PA18,SU35
 93,Kyosho2,KT-17

Multiprotocol/Multi_Protos.ino

@@ -184,7 +184,7 @@ const char STR_SUBTYPE_KYOSHO2[] =    "\x05""KT-17";
 const char STR_SUBTYPE_KYOSHO3[] =    "\x03""ASF";
 const char STR_SUBTYPE_FUTABA[] =     "\x05""SFHSS";
 const char STR_SUBTYPE_JJRC345[] =    "\x08""JJRC345\0""SkyTmblr";
-const char STR_SUBTYPE_MOULDKG[] =    "\x06""Analog""Digit\0";
+const char STR_SUBTYPE_MOULDKG[] =    "\x05""A4444""D4444""A664\0";
 const char STR_SUBTYPE_KF606[] =      "\x06""KF606\0""MIG320""ZCZ50\0";
 const char STR_SUBTYPE_E129[] =       "\x04""E129""C186";
 const char STR_SUBTYPE_FX[] =         "\x05""816\0 ""620\0 ""9630\0""Q560\0""QF012";
@@ -425,7 +425,7 @@ const mm_protocol_definition multi_protocols[] = {
 		{PROTO_MLINK,      STR_MLINK,     NO_SUBTYPE,            0, OPTION_NONE,    1, 0, SW_CYRF,   MLINK_init,      MLINK_callback      },
 	#endif
 	#if defined(MOULDKG_NRF24L01_INO)
-		{PROTO_MOULDKG,    STR_MOULDKG,   STR_SUBTYPE_MOULDKG,   2, OPTION_OPTION,  0, 0, SW_NRF,    MOULDKG_init,    MOULDKG_callback    },
+		{PROTO_MOULDKG,    STR_MOULDKG,   STR_SUBTYPE_MOULDKG,   3, OPTION_OPTION,  0, 0, SW_NRF,    MOULDKG_init,    MOULDKG_callback    },
 	#endif
 	#if defined(MT99XX_CCNRF_INO)
 		{PROTO_MT99XX,     STR_MT99XX,    STR_SUBTYPE_MT99,      8, OPTION_NONE,    0, 0, SW_NRF,    MT99XX_init,     MT99XX_callback     },

Multiprotocol/Multiprotocol.h

@@ -19,7 +19,7 @@
 #define VERSION_MAJOR		1
 #define VERSION_MINOR		3
 #define VERSION_REVISION	4
-#define VERSION_PATCH_LEVEL	44
+#define VERSION_PATCH_LEVEL	46
 
 #define MODE_SERIAL 0
 
@@ -471,8 +471,9 @@ enum RLINK
 };
 enum MOULDKG
 {
-	MOULDKG_ANALOG	= 0,
-	MOULDKG_DIGIT	= 1,
+	MOULDKG_ANALOG4	= 0,
+	MOULDKG_DIGIT4	= 1,
+	MOULDKG_ANALOG6	= 2,
 };
 enum KF606
 {
@@ -491,7 +492,7 @@ enum FX
 	FX620			= 1,
     FX9630          = 2,
 	FX_Q560			= 3,
-	FX_QF012  = 4,
+	FX_QF012		= 4,
 };
 enum SGF22
 {

Multiprotocol/Validate.h

@@ -494,6 +494,7 @@
 	#undef PROPEL_HUB_TELEMETRY
 	#undef OMP_HUB_TELEMETRY
 	#undef V761_HUB_TELEMETRY
+	#undef FX_HUB_TELEMETRY
 	#undef KAMTOM_HUB_TELEMETRY
 	#undef YUXIANG_HUB_TELEMETRY
 	#undef RLINK_HUB_TELEMETRY
@@ -534,6 +535,9 @@
 	#if not defined(V761_NRF24L01_INO)
 		#undef V761_HUB_TELEMETRY
 	#endif
+	#if not defined(FX_NRF24L01_INO)
+		#undef FX_HUB_TELEMETRY
+	#endif
 	#if not defined(KAMTOM_NRF24L01_INO)
 		#undef KAMTOM_HUB_TELEMETRY
 	#endif
@@ -597,7 +601,7 @@
 		//protocols using FRSKYD user frames
 		#undef HUB_TELEMETRY 
 	#endif
-	#if not defined(HOTT_FW_TELEMETRY) && not defined(DSM_TELEMETRY) && not defined(SPORT_TELEMETRY) && not defined(HUB_TELEMETRY) && not defined(HUBSAN_HUB_TELEMETRY) && not defined(BUGS_HUB_TELEMETRY) && not defined(NCC1701_HUB_TELEMETRY) && not defined(BAYANG_HUB_TELEMETRY) && not defined(CABELL_HUB_TELEMETRY) && not defined(RLINK_HUB_TELEMETRY) && not defined(AFHDS2A_HUB_TELEMETRY) && not defined(AFHDS2A_FW_TELEMETRY) && not defined(MULTI_TELEMETRY) && not defined(MULTI_STATUS) && not defined(HITEC_HUB_TELEMETRY) && not defined(HITEC_FW_TELEMETRY) && not defined(SCANNER_TELEMETRY) && not defined(FRSKY_RX_TELEMETRY) && not defined(AFHDS2A_RX_TELEMETRY) && not defined(BAYANG_RX_TELEMETRY) && not defined(DEVO_HUB_TELEMETRY) && not defined(PROPEL_HUB_TELEMETRY) && not defined(OMP_HUB_TELEMETRY) && not defined(V761_HUB_TELEMETRY) && not defined(KAMTOM_HUB_TELEMETRY) && not defined(YUXIANG_HUB_TELEMETRY) && not defined(WFLY2_HUB_TELEMETRY) && not defined(LOLI_HUB_TELEMETRY) && not defined(MLINK_HUB_TELEMETRY) && not defined(MLINK_FW_TELEMETRY) && not defined(MT99XX_HUB_TELEMETRY) && not defined(MULTI_CONFIG_INO)
+	#if not defined(HOTT_FW_TELEMETRY) && not defined(DSM_TELEMETRY) && not defined(SPORT_TELEMETRY) && not defined(HUB_TELEMETRY) && not defined(HUBSAN_HUB_TELEMETRY) && not defined(BUGS_HUB_TELEMETRY) && not defined(NCC1701_HUB_TELEMETRY) && not defined(BAYANG_HUB_TELEMETRY) && not defined(CABELL_HUB_TELEMETRY) && not defined(RLINK_HUB_TELEMETRY) && not defined(AFHDS2A_HUB_TELEMETRY) && not defined(AFHDS2A_FW_TELEMETRY) && not defined(MULTI_TELEMETRY) && not defined(MULTI_STATUS) && not defined(HITEC_HUB_TELEMETRY) && not defined(HITEC_FW_TELEMETRY) && not defined(SCANNER_TELEMETRY) && not defined(FRSKY_RX_TELEMETRY) && not defined(AFHDS2A_RX_TELEMETRY) && not defined(BAYANG_RX_TELEMETRY) && not defined(DEVO_HUB_TELEMETRY) && not defined(PROPEL_HUB_TELEMETRY) && not defined(OMP_HUB_TELEMETRY) && not defined(V761_HUB_TELEMETRY) && not defined(FX_HUB_TELEMETRY) && not defined(KAMTOM_HUB_TELEMETRY) && not defined(YUXIANG_HUB_TELEMETRY) && not defined(WFLY2_HUB_TELEMETRY) && not defined(LOLI_HUB_TELEMETRY) && not defined(MLINK_HUB_TELEMETRY) && not defined(MLINK_FW_TELEMETRY) && not defined(MT99XX_HUB_TELEMETRY) && not defined(MULTI_CONFIG_INO)
 		#undef TELEMETRY
 		#undef INVERT_TELEMETRY
 		#undef MULTI_TELEMETRY

Multiprotocol/_Config.h

@@ -354,14 +354,15 @@
 #define OMP_HUB_TELEMETRY			// Use FrSkyD Hub format to send telemetry to TX
 #define V761_HUB_TELEMETRY			// Use FrSkyD Hub format to send telemetry to TX
 #define KAMTOM_HUB_TELEMETRY		// Use FrSkyD Hub format to send telemetry to TX
-#define YUXIANG_HUB_TELEMETRY
+#define FX_HUB_TELEMETRY			// Use FrSkyD Hub format to send telemetry to TX
+#define YUXIANG_HUB_TELEMETRY		// Use FrSkyD Hub format to send telemetry to TX
 #define PROPEL_HUB_TELEMETRY		// Use FrSkyD Hub format to send telemetry to TX
 #define CABELL_HUB_TELEMETRY		// Use FrSkyD Hub format to send telemetry to TX
 #define RLINK_HUB_TELEMETRY			// Use FrSkyD Hub format to send telemetry to TX
 #define WFLY2_HUB_TELEMETRY			// Use FrSkyD Hub format to send telemetry to TX
 #define LOLI_HUB_TELEMETRY			// Use FrSkyD Hub format to send telemetry to TX
 #define MT99XX_HUB_TELEMETRY		// Use FrSkyD Hub format to send telemetry to TX
-//#define MLINK_HUB_TELEMETRY			// Use FrSkyD Hub format to send telemetry to TX
+//#define MLINK_HUB_TELEMETRY		// Use FrSkyD Hub format to send telemetry to TX
 #define MLINK_FW_TELEMETRY			// Forward received telemetry packet directly to TX to be decoded by erskyTX and OpenTX
 //#define HITEC_HUB_TELEMETRY		// Use FrSkyD Hub format to send basic telemetry to the radios which can decode it like er9x, erskyTX and OpenTX
 #define HITEC_FW_TELEMETRY			// Forward received telemetry packets to be decoded by erskyTX and OpenTX
@@ -781,8 +782,9 @@ const PPM_Parameters PPM_prot[14*NBR_BANKS]=	{
 	PROTO_MLINK
 		NONE
 	PROTO_MOULDKG
-		MOULDKG_ANALOG
-		MOULDKG_DIGIT
+		MOULDKG_ANALOG4
+		MOULDKG_DIGIT4
+		MOULDKG_ANALOG6
 	PROTO_MT99XX
 		MT99
 		H7

Protocols_Details.md

@@ -125,7 +125,7 @@ CFlie|38|CFlie||||||||NRF24L01|
 [Losi](Protocols_Details.md#Losi---89)|89|||||||||CYRF6936|
 [MJXq](Protocols_Details.md#MJXQ---18)|18|WLH08|X600|X800|H26D|E010*|H26WH|PHOENIX*||NRF24L01|XN297
 [MLINK](Protocols_Details.md#MLINK---78)|78|||||||||CYRF6936|
-[MouldKg](Protocols_Details.md#mouldkg---90)|90|Analog|Digit|||||||NRF24L01|XN297
+[MouldKg](Protocols_Details.md#mouldkg---90)|90|A4444|D4444|A664||||||NRF24L01|XN297
 [MT99xx](Protocols_Details.md#MT99XX---17)|17|MT|H7|YZ|LS|FY805|A180|DRAGON|F949G|NRF24L01|XN297
 [MT99xx2](Protocols_Details.md#MT99XX2---92)|92|PA18|SU35|||||||NRF24L01|XN297
 [NCC1701](Protocols_Details.md#NCC1701---44)|44|||||||||NRF24L01|
@@ -2071,6 +2071,9 @@ CH16| CH8 | -100% | 0% | - | - | -
 ## MouldKg - *90*
 Mould King 2.4GHz TX: Technic Brick models
 
+### Sub_protocol A4444 - *0*
+Model: 4 analog ports brick
+
 Up to 4 bricks can be controlled at the same time.
 
 Option field | Value
@@ -2086,17 +2089,52 @@ To associate a brick to a RX number (RX_num above), set this RX number under the
 Example: I want to control 2 bricks. I select RX number 1, set option to 1 and launch a bind on the first brick. I select RX number 2, set option to 1 and launch a bind on the second brick. Now to control both bricks I set RX number to 1 and option to 2. Therefore brick1 will react to channels CH1 to CH4 and brick2 to channel CH5 to CH8.
 On another model I can control 4 other bricks, bind each brick to RX number 3 to 6 and then finaly set RX number to 3 and option to 4 to contol the 4 bricks with CH1 to CH16.
 
-### Sub_protocol Analog - *0*
+CH1|CH2|CH3|CH4|CH5|CH6|CH7|CH8|CH9|CH10|CH11|CH12|CH13|CH14|CH15|CH16
+---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---
+Brick1_A|Brick1_B|Brick1_C|Brick1_D|Brick2_A|Brick2_B|Brick2_C|Brick2_D|Brick3_A|Brick3_B|Brick3_C|Brick3_D|Brick4_A|Brick4_B|Brick4_C|Brick4_D
+
+### Sub_protocol D4444 - *1*
+Model: 4 digital ports brick
+
+Up to 4 bricks can be controlled at the same time.
+
+Option field | Value
+-------------|------
+0|The module will act like the original radio which will bind every time and attach to the first brick in bind mode
+1|The module will control the brick number RX_num
+2|The module will control the brick number RX_num and RX_num+1
+3|The module will control the brick number RX_num, RX_num+1 and RX_num+2
+4|The module will control the brick number RX_num, RX_num+1, RX_num+2 and RX_num+3
+
+To associate a brick to a RX number (RX_num above), set this RX number under the protocol, set option to 1, launch a bind and power on the brick you want to control. Repeat this for every brick using a different RX number each time and then indicate the number of bricks to be controlled using the Option field.
+
+Example: I want to control 2 bricks. I select RX number 1, set option to 1 and launch a bind on the first brick. I select RX number 2, set option to 1 and launch a bind on the second brick. Now to control both bricks I set RX number to 1 and option to 2. Therefore brick1 will react to channels CH1 to CH4 and brick2 to channel CH5 to CH8.
+On another model I can control 4 other bricks, bind each brick to RX number 3 to 6 and then finaly set RX number to 3 and option to 4 to contol the 4 bricks with CH1 to CH16.
 
 CH1|CH2|CH3|CH4|CH5|CH6|CH7|CH8|CH9|CH10|CH11|CH12|CH13|CH14|CH15|CH16
 ---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---
 Brick1_A|Brick1_B|Brick1_C|Brick1_D|Brick2_A|Brick2_B|Brick2_C|Brick2_D|Brick3_A|Brick3_B|Brick3_C|Brick3_D|Brick4_A|Brick4_B|Brick4_C|Brick4_D
 
-### Sub_protocol Digit - *1*
+### Sub_protocol A664 - *2*
+Model: 4/6 analog ports brick
+
+Up to 3 bricks can be controlled at the same time. The bricks can be either 4 or 6 ports but only the 2 first bricks will be sent 6 channels, the last brick will only be sent 4 channels.
+
+Option field | Value
+-------------|------
+0|The module will act like the original radio which will bind every time and attach to the first brick in bind mode
+1|The module will control the brick number RX_num
+2|The module will control the brick number RX_num and RX_num+1
+3|The module will control the brick number RX_num, RX_num+1 and RX_num+2
+
+To associate a brick to a RX number (RX_num above), set this RX number under the protocol, set option to 1, launch a bind and power on the brick you want to control. Repeat this for every brick using a different RX number each time and then indicate the number of bricks to be controlled using the Option field.
+
+Example: I want to control 2 bricks. I select RX number 1, set option to 1 and launch a bind on the first brick. I select RX number 2, set option to 1 and launch a bind on the second brick. Now to control both bricks I set RX number to 1 and option to 2. Therefore brick1 will react to channels CH1 to CH4 and brick2 to channel CH5 to CH8.
+On another model I can control 3 other bricks, bind each brick to RX number 3 to 5 and then finaly set RX number to 3 and option to 3 to contol the 4 bricks with CH1 to CH16.
 
 CH1|CH2|CH3|CH4|CH5|CH6|CH7|CH8|CH9|CH10|CH11|CH12|CH13|CH14|CH15|CH16
 ---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---
-Brick1_A|Brick1_B|Brick1_C|Brick1_D|Brick2_A|Brick2_B|Brick2_C|Brick2_D|Brick3_A|Brick3_B|Brick3_C|Brick3_D|Brick4_A|Brick4_B|Brick4_C|Brick4_D
+Brick1_A|Brick1_B|Brick1_C|Brick1_D|Brick1_E|Brick1_F|Brick2_A|Brick2_B|Brick2_C|Brick2_D|Brick2_E|Brick2_F|Brick3_A|Brick3_B|Brick3_C|Brick3_D
 
 ## NCC1701 - *44*
 Model: Air Hogs Star Trek USS Enterprise NCC-1701-A