Update Compiling.md

Multiprotocol/Kamtom_nrf24l01.ino

@@ -136,13 +136,10 @@ uint16_t KAMTOM_callback()
 				{
 					BIND_DONE;
 					if(packet_in[0] == 0xA0 && packet_in[14] == rx_tx_addr[2] && packet_in[15] == rx_tx_addr[3])
-					{//Good packet with our TXID
+					{
 						rx_tx_addr[0] = packet_in[9];
 						rx_tx_addr[1] = packet_in[10];
-						#ifdef KAMTOM_HUB_TELEMETRY
+						//if(packet_in[1] == 0x03)		// low voltage
-							v_lipo1 = packet_in[1] == 0x03 ? 0x00:0xFF;		// low voltage
-							telemetry_link = 1;
-						#endif
 					}
 					#if 0
 						for(uint8_t i=0; i < KAMTOM_PAYLOAD_SIZE; i++)
@@ -177,9 +174,6 @@ void KAMTOM_init()
 	bind_counter = KAMTOM_BIND_COUNT;
 	phase = KAMTOM_DATA;
 	hopping_frequency_no = 0;
-	#ifdef KAMTOM_HUB_TELEMETRY
-		RX_RSSI = 100;		// Dummy value
-	#endif
 }
 
 #endif

Multiprotocol/Validate.h

@@ -490,7 +490,6 @@
 	#undef PROPEL_HUB_TELEMETRY
 	#undef OMP_HUB_TELEMETRY
 	#undef V761_HUB_TELEMETRY
-	#undef KAMTOM_HUB_TELEMETRY
 	#undef YUXIANG_HUB_TELEMETRY
 	#undef RLINK_HUB_TELEMETRY
 	#undef DSM_RX_CYRF6936_INO
@@ -530,9 +529,6 @@
 	#if not defined(V761_NRF24L01_INO)
 		#undef V761_HUB_TELEMETRY
 	#endif
-	#if not defined(KAMTOM_NRF24L01_INO)
-		#undef KAMTOM_HUB_TELEMETRY
-	#endif
 	#if not defined(YUXIANG_NRF24L01_INO)
 		#undef YUXIANG_HUB_TELEMETRY
 	#endif
@@ -593,7 +589,7 @@
 		//protocols using FRSKYD user frames
 		#undef HUB_TELEMETRY 
 	#endif
-	#if not defined(HOTT_FW_TELEMETRY) && not defined(DSM_TELEMETRY) && not defined(SPORT_TELEMETRY) && not defined(HUB_TELEMETRY) && not defined(HUBSAN_HUB_TELEMETRY) && not defined(BUGS_HUB_TELEMETRY) && not defined(NCC1701_HUB_TELEMETRY) && not defined(BAYANG_HUB_TELEMETRY) && not defined(CABELL_HUB_TELEMETRY) && not defined(RLINK_HUB_TELEMETRY) && not defined(AFHDS2A_HUB_TELEMETRY) && not defined(AFHDS2A_FW_TELEMETRY) && not defined(MULTI_TELEMETRY) && not defined(MULTI_STATUS) && not defined(HITEC_HUB_TELEMETRY) && not defined(HITEC_FW_TELEMETRY) && not defined(SCANNER_TELEMETRY) && not defined(FRSKY_RX_TELEMETRY) && not defined(AFHDS2A_RX_TELEMETRY) && not defined(BAYANG_RX_TELEMETRY) && not defined(DEVO_HUB_TELEMETRY) && not defined(PROPEL_HUB_TELEMETRY) && not defined(OMP_HUB_TELEMETRY) && not defined(V761_HUB_TELEMETRY) && not defined(KAMTOM_HUB_TELEMETRY) && not defined(YUXIANG_HUB_TELEMETRY) && not defined(WFLY2_HUB_TELEMETRY) && not defined(LOLI_HUB_TELEMETRY) && not defined(MLINK_HUB_TELEMETRY) && not defined(MLINK_FW_TELEMETRY) && not defined(MT99XX_HUB_TELEMETRY) && not defined(MULTI_CONFIG_INO)
+	#if not defined(HOTT_FW_TELEMETRY) && not defined(DSM_TELEMETRY) && not defined(SPORT_TELEMETRY) && not defined(HUB_TELEMETRY) && not defined(HUBSAN_HUB_TELEMETRY) && not defined(BUGS_HUB_TELEMETRY) && not defined(NCC1701_HUB_TELEMETRY) && not defined(BAYANG_HUB_TELEMETRY) && not defined(CABELL_HUB_TELEMETRY) && not defined(RLINK_HUB_TELEMETRY) && not defined(AFHDS2A_HUB_TELEMETRY) && not defined(AFHDS2A_FW_TELEMETRY) && not defined(MULTI_TELEMETRY) && not defined(MULTI_STATUS) && not defined(HITEC_HUB_TELEMETRY) && not defined(HITEC_FW_TELEMETRY) && not defined(SCANNER_TELEMETRY) && not defined(FRSKY_RX_TELEMETRY) && not defined(AFHDS2A_RX_TELEMETRY) && not defined(BAYANG_RX_TELEMETRY) && not defined(DEVO_HUB_TELEMETRY) && not defined(PROPEL_HUB_TELEMETRY) && not defined(OMP_HUB_TELEMETRY) && not defined(V761_HUB_TELEMETRY) && not defined(YUXIANG_HUB_TELEMETRY) && not defined(WFLY2_HUB_TELEMETRY) && not defined(LOLI_HUB_TELEMETRY) && not defined(MLINK_HUB_TELEMETRY) && not defined(MLINK_FW_TELEMETRY) && not defined(MT99XX_HUB_TELEMETRY) && not defined(MULTI_CONFIG_INO)
 		#undef TELEMETRY
 		#undef INVERT_TELEMETRY
 		#undef MULTI_TELEMETRY

Multiprotocol/XK2_ccnrf.ino

@@ -200,7 +200,7 @@ uint16_t XK2_callback()
 			}
 			return 1000;
 		case XK2_DATA_PREP:
-			crc8 = eeprom_read_byte((EE_ADDR)(XK2_EEPROM_OFFSET+RX_num));
+			crc8=eeprom_read_byte((EE_ADDR)(XK2_EEPROM_OFFSET+RX_num));
 			debugln("R:RX_ID=%02X",crc8);
 			XN297_SetTxRxMode(TXRX_OFF);
 			XN297_SetTxRxMode(TX_EN);

Multiprotocol/_Config.h

@@ -351,7 +351,6 @@
 #define NCC1701_HUB_TELEMETRY		// Use FrSkyD Hub format to send telemetry to TX
 #define OMP_HUB_TELEMETRY			// Use FrSkyD Hub format to send telemetry to TX
 #define V761_HUB_TELEMETRY			// Use FrSkyD Hub format to send telemetry to TX
-#define KAMTOM_HUB_TELEMETRY		// Use FrSkyD Hub format to send telemetry to TX
 #define YUXIANG_HUB_TELEMETRY
 #define PROPEL_HUB_TELEMETRY		// Use FrSkyD Hub format to send telemetry to TX
 #define CABELL_HUB_TELEMETRY		// Use FrSkyD Hub format to send telemetry to TX

Protocols_Details.md

@@ -115,7 +115,6 @@ CFlie|38|CFlie||||||||NRF24L01|
 [JIABAILE](Protocols_Details.md#JIABAILE---102)|102|Std|Gyro|||||||NRF24L01|XN297
 [JJRC345](Protocols_Details.md#JJRC345---71)|71|JJRC345|SkyTmblr|||||||NRF24L01|XN297
 [JOYSWAY](Protocols_Details.md#JOYSWAY---84)|84|||||||||NRF24L01|XN297
-[KAMTOM](Protocols_Details.md#KAMTOM---104)|104|||||||||NRF24L01|XN297
 [KF606](Protocols_Details.md#KF606---49)|49|KF606|MIG320|ZCZ50||||||NRF24L01|XN297
 [KN](Protocols_Details.md#KN---9)|9|WLTOYS|FEILUN|||||||NRF24L01|
 [Kyosho](Protocols_Details.md#Kyosho---73)|73|FHSS|Hype|||||||A7105|
@@ -1983,13 +1982,13 @@ Model: DF-Models SkyTumbler
 RTH not supported
 
 ## KAMTOM - *104*
-Models: KAMTOM RC Racing KM24xx (KM32xx?), Pinecone SG-24xx
+Models: KAMTOM KM24xx (KM32xx?), Pinecone SG-24xx
 
 CH1|CH2|CH3|CH4|CH5|CH6|CH7
 ---|---|---|---|---|---|---
 ST|TH|UNK1|UNK2|ST_TR|TH_TR|TH_DR
 
-Low battery telemetry in A1 with 0 = low batt
+Low batt telemetry is not yet added.
 
 ## KYOSHO2 - *93*
 Model: TX KT-17, Minium Edge 540, Minium Citabria