Traxxas TQ 1st gen: try 5

Multiprotocol/CYRF6936_SPI.ino

@@ -326,9 +326,7 @@ const uint8_t PROGMEM DEVO_j6pro_sopcodes[][8] = {
     {0xB6, 0x31, 0xAE, 0x46, 0x5A, 0xCC, 0xAE, 0x46},
     {0x9E, 0x82, 0xDC, 0x3C, 0xA1, 0x78, 0xDC, 0x3C},
     {0x6F, 0x65, 0x18, 0x74, 0xB9, 0x8E, 0x19, 0x74},
-#endif
+    {0x62, 0xDF, 0xC1, 0x49, 0xDF, 0xB1, 0xC0, 0x49}, //j6pro bind
-#if defined(TRAXXAS_CYRF6936_INO)
-    {0x62, 0xDF, 0xC1, 0x49, 0xDF, 0xB1, 0xC0, 0x49},
 #endif
 };
 #endif

Multiprotocol/J6Pro_cyrf6936.ino

@@ -35,7 +35,6 @@ enum PktState {
     J6PRO_CHAN_4,
 };
 
-const uint8_t PROGMEM j6pro_bind_sop_code[] = {0x62, 0xdf, 0xc1, 0x49, 0xdf, 0xb1, 0xc0, 0x49};
 const uint8_t j6pro_data_code[] = {0x02, 0xf9, 0x93, 0x97, 0x02, 0xfa, 0x5c, 0xe3, 0x01, 0x2b, 0xf1, 0xdb, 0x01, 0x32, 0xbe, 0x6f}; // unneeded since this is the default table after a reset
 
 static void __attribute__((unused)) j6pro_build_bind_packet()
@@ -99,7 +98,7 @@ static void __attribute__((unused)) cyrf_bindinit()
     /* Use when binding */
     CYRF_SetPower(0x28); //Deviation using max power, replaced by bind power...
     //CYRF_ConfigRFChannel(0x52);
-    CYRF_PROGMEM_ConfigSOPCode(j6pro_bind_sop_code);
+    CYRF_PROGMEM_ConfigSOPCode(DEVO_j6pro_sopcodes[19]);
     CYRF_ConfigCRCSeed(0x0000);
     //CYRF_WriteRegister(CYRF_06_RX_CFG, 0x4a);
     //CYRF_WriteRegister(CYRF_05_RX_CTRL, 0x80);

Multiprotocol/TRAXXAS_cyrf6936.ino

@@ -284,7 +284,6 @@ uint16_t TRAXXAS_callback()
 			}
 			return 10000;
 		case TRAXXAS_TQ1_DATA1:
-			//debugln_time("DATA1");
 			#ifdef MULTI_SYNC
 				telemetry_set_input_sync(19900);
 			#endif
@@ -293,7 +292,6 @@ uint16_t TRAXXAS_callback()
 			phase++;
 			return 7100;
 		case TRAXXAS_TQ1_DATA2:
-			//debugln_time("DATA2");
 			CYRF_ConfigRFChannel(hopping_frequency[0]);
 			TRAXXAS_TQ1_send_data_packet();
 			phase = TRAXXAS_TQ1_DATA1;
@@ -308,14 +306,16 @@ void TRAXXAS_init()
 	uint8_t init;
 	if(sub_protocol == TRAXXAS_TQ1)
 	{
-		CYRF_WriteRegister(CYRF_06_RX_CFG, 0x48 | 0x02);
+		//CYRF_WriteRegister(CYRF_06_RX_CFG, 0x48 | 0x02);
-		CYRF_WriteRegister(CYRF_26_XTAL_CFG, 0x08);
+		//CYRF_WriteRegister(CYRF_26_XTAL_CFG, 0x08);
 		init = 5;
 	}
 	else //TQ2
+	{
 		init = sizeof(TRAXXAS_init_vals) / 2;
 		for(uint8_t i = 0; i < init; i++)	
 			CYRF_WriteRegister(pgm_read_byte_near(&TRAXXAS_init_vals[i][0]), pgm_read_byte_near(&TRAXXAS_init_vals[i][1]));
+	}
 
 	//Read CYRF ID
 	CYRF_GetMfgData(cyrfmfg_id);
@@ -323,7 +323,7 @@ void TRAXXAS_init()
 	if(sub_protocol == TRAXXAS_TQ1)
 	{
 		cyrfmfg_id[3]+=RX_num;				// Not needed for TQ2 since the TX and RX have to match
-		CYRF_FindBestChannels(hopping_frequency,1,1,0x0B,0x30, FIND_CHANNEL_ANY);	// Complete guess
+		//CYRF_FindBestChannels(hopping_frequency,1,1,0x0B,0x30, FIND_CHANNEL_ANY);	// Complete guess
 	}
 	else //TRAXXAS_TQ2
 		CYRF_FindBestChannels(hopping_frequency,1,1,0x02,0x21, FIND_CHANNEL_ANY);
@@ -360,8 +360,18 @@ void TRAXXAS_init()
 	bind_counter=100;
 	if(sub_protocol == TRAXXAS_TQ1)
 	{
-		CYRF_WriteRegister(CYRF_0F_XACT_CFG, 0x29);				// Not needed...
+		CYRF_WriteRegister(CYRF_28_CLK_EN, 0x02);
+		CYRF_WriteRegister(CYRF_32_AUTO_CAL_TIME, 0x3C);
+		CYRF_WriteRegister(CYRF_35_AUTOCAL_OFFSET, 0x14);
+		CYRF_WriteRegister(CYRF_26_XTAL_CFG, 0x08);
+		CYRF_WriteRegister(CYRF_06_RX_CFG, 0x48);
+		CYRF_WriteRegister(CYRF_1B_TX_OFFSET_LSB, 0x55);
+		CYRF_WriteRegister(CYRF_1C_TX_OFFSET_MSB, 0x05);
+		CYRF_WriteRegister(CYRF_0F_XACT_CFG, 0x21);
+		CYRF_WriteRegister(CYRF_03_TX_CFG, 0x0C);
 		CYRF_PROGMEM_ConfigSOPCode(DEVO_j6pro_sopcodes[0]);
+		CYRF_SetTxRxMode(TX_EN);
+		CYRF_WriteRegister(CYRF_0F_XACT_CFG, 0x21);
 		if(IS_BIND_IN_PROGRESS)
 			phase = TRAXXAS_TQ1_BIND;
 		else