Update Protocols_Details.md

Lua_scripts/MultiChan.txt

@@ -54,10 +54,9 @@
 28,1,Flysky_AFHDS2A,PPM_IBUS,0,CH5,CH6,CH7,CH8,CH9,CH10,CH11,CH12,CH13,CH14
 28,2,Flysky_AFHDS2A,PWM_SBUS,0,CH5,CH6,CH7,CH8,CH9,CH10,CH11,CH12,CH13,CH14
 28,3,Flysky_AFHDS2A,PPM_SBUS,0,CH5,CH6,CH7,CH8,CH9,CH10,CH11,CH12,CH13,CH14
-28,4,Flysky_AFHDS2A,PWM_IB16,0,CH5,CH6,CH7,CH8,CH9,CH10,CH11,CH12,CH13,CH14,CH15,CH16
-28,5,Flysky_AFHDS2A,PPM_IB16,0,CH5,CH6,CH7,CH8,CH9,CH10,CH11,CH12,CH13,CH14,CH15,CH16
-28,6,Flysky_AFHDS2A,PWM_SB16,0,CH5,CH6,CH7,CH8,CH9,CH10,CH11,CH12,CH13,CH14,CH15,CH16
-28,7,Flysky_AFHDS2A,PPM_SB16,0,CH5,CH6,CH7,CH8,CH9,CH10,CH11,CH12,CH13,CH14,CH15,CH16
+28,4,Flysky_AFHDS2A,Gyro_Off,0,CH5,CH6,CH7,CH8,CH9,CH10,CH11,CH12,ST_Ga,TH_Ga,Prio,Calib
+28,5,Flysky_AFHDS2A,Gyro_On,0,CH5,CH6,CH7,CH8,CH9,CH10,CH11,CH12,ST_Ga,TH_Ga,Prio,Calib
+28,6,Flysky_AFHDS2A,G_On_Rev,0,CH5,CH6,CH7,CH8,CH9,CH10,CH11,CH12,ST_Ga,TH_Ga,Prio,Calib
 56,0,Flysky2A_RX,RX,0,CH5,CH6,CH7,CH8,CH9,CH10,CH11,CH12,CH13,CH14
 56,1,Flysky2A_RX,CPPM,0,CH5,CH6,CH7,CH8,CH9,CH10,CH11,CH12,CH13,CH14
 53,0,Height,5ch,0,Gear
@@ -91,6 +90,7 @@
 58,1,FX,620,1
 58,2,FX,9630,1,Rate,Gyro,TrimR,TrimA,TrimE
 58,3,FX,Q560,1,FLIP,Gyro,LEDs
+58,4,FX,QF012,1,FLIP,Gyro,Invert,Reset
 20,0,FY326,FY326,1,Flip,RTH,HLess,Expert,Calib
 20,1,FY326,FY319,1,Flip,RTH,HLess,Expert,Calib
 23,0,FY326,FY326,1,Flip,RTH,HLess,Expert
@@ -133,14 +133,16 @@
 18,4,MJXQ,E010,1,Flip,LED,Pict,Video,HLess,RTH,AuFlip,Pan,Tilt,Rate
 18,5,MJXQ,H26WH,1,Flip,Arm,Pict,Video,HLess,RTH,AuFlip,Pan,Tilt,Rate
 18,6,MJXQ,Phoenix,1,Flip,Arm,Pict,Video,HLess,RTH,AuFlip,Pan,Tilt,Rate
-17,0,MT99XX,Std,1,Flip,LED,Pict,Video,HLess
-17,1,MT99XX,H7,1,Flip,LED,Pict,Video,HLess
-17,2,MT99XX,YZ,1,Flip,LED,Pict,Video,HLess
-17,3,MT99XX,LS,1,Flip,Invert,Pict,Video,HLess
-17,4,MT99XX,FY805,1,Flip,n-a,n-a,n-a,HLess
-17,5,MT99XX,A180,0,3D_6G
-17,6,MT99XX,Dragon,0,Mode,RTH
-17,7,MT99XX,F949G,0,6G_3D,Light
+17,0,MT99XX,Std,1,Flip,LED,Pict,Video,HLess,Atrim,Etrim
+17,1,MT99XX,H7,1,Flip,LED,Pict,Video,HLess,Atrim,Etrim
+17,2,MT99XX,YZ,1,Flip,LED,Pict,Video,HLess,Atrim,Etrim
+17,3,MT99XX,LS,1,Flip,Invert,Pict,Video,HLess,Atrim,Etrim
+17,4,MT99XX,FY805,1,Flip,n-a,n-a,n-a,HLess,Atrim,Etrim
+17,5,MT99XX,A180,0,3D_6G,Rate,3D_6G,n-a,n-a,Atrim,Etrim
+17,6,MT99XX,Dragon,0,Mode,RTH,n-a,n-a,n-a,Atrim,Etrim
+17,7,MT99XX,F949G,0,6G_3D,Light,Rates,Unk1,Unk2,Atrim,Etrim
+92,0,MT99xx2,PA18,0,MODE,FLIP,RTH,n-a,n-a,Atrim,Etrim
+92,1,MT99xx2,SU35,0,Mode,LED,LED_FH,Invert,Rate,Atrim,Etrim
 44,0,NCC1701,Std,1,Warp
 77,0,OMP,M2,0,THold,IdleUp,6G_3D
 60,0,Pelikan,PRO_V4,0,CH5,CH6,CH7,CH8
@@ -213,11 +215,10 @@
 85,0,E016H,Std,1,Stop,Flip,n-a,HLess,RTH
 87,0,IKEA
 89,0,LOSI
-90,0,MouldKg,Analog,0
-90,1,MouldKg,Digit,0
+90,0,MouldKg,A4444,0
+90,1,MouldKg,D4444,0
+90,2,MouldKg,A664,0
 91,0,Xerall,Tank,0,FlTa,TakLan,Rate,HLess,Photo,Video,TrimR,TrimE,TrimA
-92,0,MT99xx2,PA18,0,MODE,FLIP,RTH
-92,1,MT99xx2,SU35,0,Mode,LED,LED_FH,Invert,Rate
 93,0,Kyosho2,KT-17,0
 94,0,Scorpio
 95,0,Bluefly,HP100,0,CH5,CH6,CH7,CH8

Multiprotocol/AFHDS2A_Rx_a7105.ino

@@ -183,8 +183,18 @@ uint16_t AFHDS2A_RX_callback()
 	case AFHDS2A_RX_DATA:
 		if (AFHDS2A_RX_data_ready()) {
 			A7105_ReadData(AFHDS2A_RX_TXPACKET_SIZE);
-			if (memcmp(&packet[1], rx_id, 4) == 0 && memcmp(&packet[5], rx_tx_addr, 4) == 0) {
-				if (packet[0] == 0x58 && packet[37] == 0x00 && (telemetry_link&0x7F) == 0) { // standard packet, send channels to TX
+			if (memcmp(&packet[1], rx_id, 4) == 0 && memcmp(&packet[5], rx_tx_addr, 4) == 0)
+			{
+				#if 0
+					//if(packet[0] == 0xAA)
+					{
+						for(uint8_t i=0;i<AFHDS2A_RX_TXPACKET_SIZE;i++)
+							debug(" %02X",packet[i]);
+						debugln("");
+					}
+				#endif
+				if (packet[0] == 0x58 && packet[37] == 0x00 && (telemetry_link&0x7F) == 0)
+				{ // standard packet, send channels to TX
 					int rssi = min(A7105_ReadReg(A7105_1D_RSSI_THOLD),160);
 					RX_RSSI = map16b(rssi, 160, 8, 0, 128);
 					AFHDS2A_RX_build_telemetry_packet();

Multiprotocol/AFHDS2A_a7105.ino

@@ -93,15 +93,16 @@ static void AFHDS2A_update_telemetry()
 		if (option & 0x80)
 		{// forward 0xAA and 0xAC telemetry to TX, skip rx and tx id to save space
 			packet_in[0]= TX_RSSI;
-			debug("T(%02X)=",packet[0]);
+			#if 0
+				debug("T(%02X)=",packet[0]);
+				for(uint8_t i=9;i < AFHDS2A_RXPACKET_SIZE; i++)
+					debug(" %02X",packet[i]);
+				debugln("");
+			#endif
 			for(uint8_t i=9;i < AFHDS2A_RXPACKET_SIZE; i++)
-			{
 				packet_in[i-8]=packet[i];
-				debug(" %02X",packet[i]);
-			}
 			packet_in[29]=packet[0];	// 0xAA Normal telemetry, 0xAC Extended telemetry
 			telemetry_link=2;
-			debugln("");
 			return;
 		}
 	#endif
@@ -186,16 +187,40 @@ static void AFHDS2A_build_packet(uint8_t type)
 		case AFHDS2A_PACKET_STICKS:		
 			packet[0] = 0x58;
 			//16 channels + RX_LQI on channel 17
-			for(uint8_t ch=0; ch<num_ch; ch++)
+			for(uint8_t ch=0; ch<17; ch++)
 			{
-				if(ch == 16 // CH17=RX_LQI
-				#ifdef AFHDS2A_LQI_CH
-					|| ch == (AFHDS2A_LQI_CH-1)	// override channel with LQI
-				#endif
-					)
-					val = 2000 - 10*RX_LQI;
+				val = convert_channel_ppm(sub_protocol<AFHDS2A_GYRO_OFF?CH_AETR[ch]:ch);	// No remapping for BS receivers
+				if(ch<14)
+				{
+					packet[9 +  ch*2] = val;
+					packet[10 + ch*2] = (val>>8)&0x0F;
+				}
 				else
-					val = convert_channel_ppm(CH_AETR[ch]);
+				{
+					if(ch == 16)	//CH17=RX_LQI
+						val = 2000 - 10*RX_LQI;
+					packet[10 + (ch-14)*6] |= (val)<<4;
+					packet[12 + (ch-14)*6] |= (val)&0xF0;
+					packet[14 + (ch-14)*6] |= (val>>4)&0xF0;
+				}
+			}
+			{
+				uint8_t next_hop = (hopping_frequency_no+1)&0x0F;
+				packet[34] |= next_hop<<4;
+				packet[36] |= next_hop?0x80:0x90;
+			}
+			break;
+		case AFHDS2A_PACKET_FAILSAFE:
+			packet[0] = 0x56;
+			for(uint8_t ch=0; ch<16; ch++)
+			{ // Failsafe values
+				#ifdef FAILSAFE_ENABLE
+					val = Failsafe_data[protocol==PROTO_AFHDS2A?CH_AETR[ch]:ch];	// No remapping for BS receivers
+					if(val!=FAILSAFE_CHANNEL_HOLD && val!=FAILSAFE_CHANNEL_NOPULSES)
+						val = (((val<<2)+val)>>3)+860;
+					else
+				#endif
+						val = 0x0FFF;
 				if(ch<14)
 				{
 					packet[9 +  ch*2] = val;
@@ -209,42 +234,6 @@ static void AFHDS2A_build_packet(uint8_t type)
 				}
 			}
 			break;
-		case AFHDS2A_PACKET_FAILSAFE:
-			packet[0] = 0x56;
-			for(uint8_t ch=0; ch<num_ch; ch++)
-			{
-				#ifdef FAILSAFE_ENABLE
-					if(ch<16)
-						val = Failsafe_data[CH_AETR[ch]];
-					else
-						val = FAILSAFE_CHANNEL_NOPULSES;
-					if(val!=FAILSAFE_CHANNEL_HOLD && val!=FAILSAFE_CHANNEL_NOPULSES)
-					{ // Failsafe values
-						val = (((val<<2)+val)>>3)+860;
-						if(ch<14)
-						{
-							packet[9 +  ch*2] = val;
-							packet[10 + ch*2] = (val>>8)&0x0F;
-						}
-						else
-						{
-							packet[10 + (ch-14)*6] &= 0x0F;
-							packet[10 + (ch-14)*6] |= (val)<<4;
-							packet[12 + (ch-14)*6] &= 0x0F;
-							packet[12 + (ch-14)*6] |= (val)&0xF0;
-							packet[14 + (ch-14)*6] &= 0x0F;
-							packet[14 + (ch-14)*6] |= (val>>4)&0xF0;
-						}
-					}
-					else
-				#endif
-						if(ch<14)
-						{ // no values
-							packet[9 + ch*2] = 0xff;
-							packet[10+ ch*2] = 0xff;
-						}
-			}
-			break;
 		case AFHDS2A_PACKET_SETTINGS:
 			packet[0] = 0xaa;
 			packet[9] = 0xfd;
@@ -253,17 +242,43 @@ static void AFHDS2A_build_packet(uint8_t type)
 			if(val<50 || val>400) val=50;	// default is 50Hz
 			packet[11]= val;
 			packet[12]= val >> 8;
-			packet[13] = sub_protocol & 0x01;	// 1 -> PPM output enabled
-			packet[14]= 0x00;
-			for(uint8_t i=15; i<37; i++)
-				packet[i] = 0xff;
-			packet[18] = 0x05;		// ?
-			packet[19] = 0xdc;		// ?
-			packet[20] = 0x05;		// ?
-			if(sub_protocol&2)
-				packet[21] = 0xdd;	// SBUS output enabled
+			memset(&packet[15],0xFF,22);
+#ifndef MULTI_AIR
+			if(sub_protocol < AFHDS2A_GYRO_OFF)
+			{
+#endif
+				packet[13] = sub_protocol & 0x01;	// 1 -> PPM output enabled
+				packet[14] = 0x00;		// ?
+				packet[18] = 0x05;		// ?
+				packet[19] = 0xdc;		// ?
+				packet[20] = 0x05;		// ?
+				if(sub_protocol&2)
+					packet[21] = 0xdd;	// SBUS output enabled
+				else
+					packet[21] = 0xde;	// IBUS
+#ifndef MULTI_AIR
+			}
 			else
-				packet[21] = 0xde;	// IBUS
+			{//BS receivers
+				if(sub_protocol == AFHDS2A_GYRO_OFF)
+				{
+					memset(&packet[15],0x00,4);
+					packet[22] = 0xFC;	// ?
+				}
+				else
+				{//AFHDS2A_GYRO_ON & AFHDS2A_GYRO_ON_REV
+					packet[15] = convert_channel_16b_limit(CH13,0,100);	// ST Gain
+					packet[16] = convert_channel_16b_limit(CH14,0,100);	// TH Gain
+					packet[17] = convert_channel_16b_limit(CH15,0,100);	// Priority
+					if(sub_protocol == AFHDS2A_GYRO_ON_REV)
+						packet[17] |= 0x80;								// Reverse
+					packet[18] = CH16_SW?(0x32|0x80):0x32;				// Calib|50?
+					packet[19] = 0x64;									// 100?
+					packet[20] = 0x64;									// 100?
+					packet[22] = 0xFE;									// ?
+				}
+			}
+#endif
 			break;
 	}
 	packet[37] = 0x00;
@@ -283,6 +298,9 @@ uint16_t AFHDS2A_callback()
 	static uint16_t packet_counter;
 	uint8_t data_rx=0;
 	uint16_t start;
+	#ifndef MULTI_AIR
+		static uint16_t Prev_Channel[4] = { 0,0,0,0 };
+	#endif
 	#ifndef FORCE_AFHDS2A_TUNING
 		A7105_AdjustLOBaseFreq(1);
 	#endif
@@ -367,10 +385,39 @@ uint16_t AFHDS2A_callback()
 			AFHDS2A_build_packet(packet_type);
 			data_rx=A7105_ReadReg(A7105_00_MODE);			// Check if something has been received...
 			A7105_WriteData(AFHDS2A_TXPACKET_SIZE, hopping_frequency[hopping_frequency_no++]);
-			if(hopping_frequency_no >= AFHDS2A_NUMFREQ)
-				hopping_frequency_no = 0;
+			hopping_frequency_no &= 0x0F;					// AFHDS2A_NUMFREQ
+			#if 0
+				for(uint8_t i=0; i<AFHDS2A_TXPACKET_SIZE; i++)
+					debug(" %02X",packet[i]);
+				debugln("");
+			#endif
+			#ifndef MULTI_AIR
+				if(sub_protocol > AFHDS2A_GYRO_OFF)
+				{//Gyro is on
+					//Check if gyro settings have changed
+					uint16_t val;
+					for(uint8_t i=0;i<4;i++)
+					{
+						val = Channel_data[CH13+i] - Prev_Channel[i];
+						if(val&0x8000) val ^= 0xFFFF;
+						if(val > 10)
+						{//This setting has significantly changed
+							Prev_Channel[i] = Channel_data[CH13+i];
+							packet_sent = 5;
+						}
+					}
+				}
+				if(packet_sent && (packet_counter%5)==0)
+				{//Inform the RX of the change
+					packet_type = AFHDS2A_PACKET_SETTINGS;
+					packet_sent--;
+				}
+				else
+			#endif
 			if(!(packet_counter % 1313))
+			{//Send settings every 5s
 				packet_type = AFHDS2A_PACKET_SETTINGS;
+			}
 			else
 			{
 				#ifdef FAILSAFE_ENABLE
@@ -448,9 +495,6 @@ void AFHDS2A_init()
 			rx_id[i]=eeprom_read_byte((EE_ADDR)(addr+i));
 	}
 	hopping_frequency_no = 0;
-	if(sub_protocol&0x04)
-		num_ch=17;
-	else
-		num_ch=14;
+	packet_sent = 0;
 }
 #endif

Multiprotocol/DSM_cyrf6936.ino

@@ -292,7 +292,7 @@ uint16_t DSM_callback()
 	#define DSM_CH1_CH2_DELAY	4010			// Time between write of channel 1 and channel 2
 	#ifdef STM32_BOARD
 		#define DSM_WRITE_DELAY		1600		// Time after write to verify write complete
-		#define DSM_READ_DELAY		400			// Time before write to check read phase, and switch channels.
+		#define DSM_READ_DELAY		300			// Time before write to check read phase, and switch channels.
 	#else
 		#define DSM_WRITE_DELAY		1950		// Time after write to verify write complete
 		#define DSM_READ_DELAY		600			// Time before write to check read phase, and switch channels.
@@ -470,15 +470,15 @@ uint16_t DSM_callback()
 		case DSM_CH2_READ_B:
 			//Read telemetry
 			rx_phase = CYRF_ReadRegister(CYRF_07_RX_IRQ_STATUS);
-			debug("ST1:%02X ",rx_phase);
+			//debug("ST1:%02X ",rx_phase);
 			if((rx_phase & 0x03) == 0x02)  					// RXC=1, RXE=0 then 2nd check is required (debouncing)
 				rx_phase |= CYRF_ReadRegister(CYRF_07_RX_IRQ_STATUS);
-			debug("ST2:%02X ",rx_phase);
+			//debug("ST2:%02X ",rx_phase);
 			if((rx_phase & 0x07) == 0x02)
 			{ // good data (complete with no errors)
 				CYRF_WriteRegister(CYRF_07_RX_IRQ_STATUS, 0x80);	// need to set RXOW before data read
 				length=CYRF_ReadRegister(CYRF_09_RX_COUNT);
-				debug("RX(%d)",length);
+				//debug("RX(%d)",length);
 				if(length>TELEMETRY_BUFFER_SIZE-2)
 					length=TELEMETRY_BUFFER_SIZE-2;
 				CYRF_ReadDataPacketLen(packet_in+1, length);
@@ -496,7 +496,7 @@ uint16_t DSM_callback()
 				//	debug(" %02X", packet_in[i]);
 				telemetry_link=1;
 			}
-			debugln("");
+			//debugln("");
 			CYRF_WriteRegister(CYRF_29_RX_ABORT, 0x20);		// Abort RX operation
 			if (phase == DSM_CH2_READ_A && (sub_protocol==DSM2_1F || sub_protocol==DSMX_1F) && num_ch < 8)	// 22ms mode
 			{

Multiprotocol/FX_nrf24l01.ino

@@ -34,15 +34,24 @@ Multiprotocol is distributed in the hope that it will be useful,
 #define FX620_CH_OFFSET				1
 
 #define FX9630_PACKET_PERIOD		8124	//8156 on QIDI-560
-#define FX9630_BIND_PACKET_PERIOD	8124
 #define FX9630_BIND_CHANNEL			51
 #define FX9630_PAYLOAD_SIZE			8
 #define FX9630_NUM_CHANNELS			3
+#define FX9630_WRITE_TIME			500
+
+#define FX_QF012_PACKET_PERIOD		12194
+#define FX_QF012_RX_PAYLOAD_SIZE	3
 
 //#define FORCE_FX620_ID
 //#define FORCE_FX9630_ID
 //#define FORCE_QIDI_ID
 
+enum 
+{
+	FX_DATA=0,
+	FX_RX,
+};
+
 static void __attribute__((unused)) FX_send_packet()
 {
 	static uint8_t trim_ch = 0;
@@ -52,21 +61,20 @@ static void __attribute__((unused)) FX_send_packet()
 	{
 		XN297_Hopping(hopping_frequency_no++);
 		if(sub_protocol >= FX9630)
-		{ // FX9630 & FX_Q560
-			XN297_SetTXAddr(rx_tx_addr, 4);
+		{ // FX9630 & FX_Q560 & FX_QF012
 			if (hopping_frequency_no >= FX9630_NUM_CHANNELS)
 			{
 				hopping_frequency_no = 0;
 				if(sub_protocol == FX9630)
 				{
 					trim_ch++;
-					if(trim_ch > 3) trim_ch = 0;
+					trim_ch &= 3;
 				}
-				else // FX_Q560
+				else // FX_Q560 & FX_QF012
 					trim_ch = 0;
 			}
 		}
-		else // FX816 and FX620
+		else // FX816 & FX620
 		{
 			hopping_frequency_no &= 0x03;
 		}
@@ -77,7 +85,7 @@ static void __attribute__((unused)) FX_send_packet()
 	//Channels
 	uint8_t val;
 	if (sub_protocol >= FX9630)
-	{ // FX9630 & FX_Q560
+	{ // FX9630 & FX_Q560 & FX_QF012
 		packet[0] = convert_channel_8b(THROTTLE);
 		packet[1] = convert_channel_8b(AILERON);
 		packet[2] = 0xFF - convert_channel_8b(ELEVATOR);
@@ -85,14 +93,18 @@ static void __attribute__((unused)) FX_send_packet()
 		val = trim_ch==0 ? 0x20 : (convert_channel_8b(trim_ch + CH6) >> 2);	// no trim on Throttle
 		packet[4] = val;			// Trim for channel x 0C..20..34
 		packet[5] = (trim_ch << 4)	// channel x << 4
-					| GET_FLAG(CH5_SW, 0x01)  // DR toggle swich: 0 small throw, 1 large throw / Q560 acrobatic
+					| GET_FLAG(CH5_SW, (sub_protocol == FX_QF012 ? 0x08 : 0x01))  // DR toggle swich: 0 small throw, 1 large throw / Q560 acrobatic / QF012 Special effects
 					// FX9630  =>0:6G small throw, 1:6G large throw, 2:3D
 					// QIDI-550=>0:3D, 1:6G, 2:Torque
+					// QF012=>0:beginner(6G), 1:mid(3D), 2:expert(Gyro off) 
 					| (Channel_data[CH6] < CHANNEL_MIN_COMMAND ? 0x00 : (Channel_data[CH6] > CHANNEL_MAX_COMMAND ? 0x04 : 0x02));
 		if(sub_protocol == FX_Q560)
 			packet[5] |= GET_FLAG(CH7_SW, 0x18);	// Q560 LED flag 0x10 conflicting with trim_ch... Corrected on new boards using 0x08 instead
+		else if (sub_protocol == FX_QF012) 
+      			packet[5] |=  GET_FLAG(CH7_SW, 0x40)  // QF012 invert flight
+                		    | GET_FLAG(CH8_SW, 0x80);  // QF012 Restore fine tunning midpoint
 	}
-	else // FX816 and FX620
+	else // FX816 & FX620
 	{
 		uint8_t offset=sub_protocol == FX816 ? FX816_CH_OFFSET:FX620_CH_OFFSET;
 		val=convert_channel_8b(AILERON);
@@ -130,7 +142,7 @@ static void __attribute__((unused)) FX_send_packet()
 			packet[5] = 0xAB;	// Is it based on ID??
 		}
 	}
-	else // FX9630 & FX_Q560
+	else // FX9630 & FX_Q560 & FX_QF012
 	{
 		if(IS_BIND_IN_PROGRESS)
 		{
@@ -182,11 +194,11 @@ static void __attribute__((unused)) FX_RF_init()
 		packet_period = FX620_BIND_PACKET_PERIOD;
 		packet_length = FX620_PAYLOAD_SIZE;
 	}
-	else // FX9630 & FX_Q560
+	else // FX9630 & FX_Q560 & FX_QF012
 	{
 		XN297_SetTXAddr((uint8_t *)"\x56\x78\x90\x12", 4);
 		XN297_RFChannel(FX9630_BIND_CHANNEL);
-		packet_period = FX9630_BIND_PACKET_PERIOD;
+		packet_period = sub_protocol == FX_QF012 ? FX_QF012_PACKET_PERIOD : FX9630_PACKET_PERIOD;
 		packet_length = FX9630_PAYLOAD_SIZE;
 	}
 }
@@ -214,15 +226,16 @@ static void __attribute__((unused)) FX_initialize_txid()
 		for(uint8_t i=1;i<FX_NUM_CHANNELS;i++)
 			hopping_frequency[i] = i*10 + hopping_frequency[0];
 	}
-	else // FX9630 & FX_Q560
+	else // FX9630 & FX_Q560 & FX_QF012
 	{
+		//??? Need to find out how the first RF channel is calculated ???
+		hopping_frequency[0] = 0x13;
+		//Other 2 RF channels are sent during the bind phase so they can be whatever
+		hopping_frequency[1] = RX_num & 0x0F + 0x1A;
+		hopping_frequency[2] = rx_tx_addr[3] & 0x0F + 0x38;
 		#ifdef FORCE_FX9630_ID
 			memcpy(rx_tx_addr,(uint8_t*)"\xCE\x31\x9B\x73", 4);
 			memcpy(hopping_frequency,"\x13\x1A\x38", FX9630_NUM_CHANNELS);		//Original dump=>19=0x13,26=0x1A,56=0x38
-		#else
-			hopping_frequency[0] = 0x13; // constant???
-			hopping_frequency[1] = RX_num & 0x0F + 0x1A;
-			hopping_frequency[2] = rx_tx_addr[3] & 0x0F + 0x38;
 		#endif
 		#ifdef FORCE_QIDI_ID
 			memcpy(rx_tx_addr,(uint8_t*)"\x23\xDC\x76\xA2", 4);
@@ -232,26 +245,79 @@ static void __attribute__((unused)) FX_initialize_txid()
 			//memcpy(rx_tx_addr,(uint8_t*)"\x38\xC7\x6D\x8D", 4);
 			//memcpy(hopping_frequency,"\x0D\x20\x3A", FX9630_NUM_CHANNELS);
 		#endif
-		//??? Need to find out how the first RF channel is calculated ???
 	}
 }
 
 uint16_t FX_callback()
 {
-	#ifdef MULTI_SYNC
-		telemetry_set_input_sync(packet_period);
-	#endif
-	if(bind_counter)
-		if(--bind_counter==0)
+	#ifdef FX_HUB_TELEMETRY
+		bool rx=false;
+		
+		switch(phase)
 		{
-			BIND_DONE;
-			if(sub_protocol == FX620)
-			{
-				XN297_SetTXAddr(rx_tx_addr, 3);
-				packet_period = FX620_PACKET_PERIOD;
-			}
+			case FX_DATA:
+				rx = XN297_IsRX();
+				XN297_SetTxRxMode(TXRX_OFF);
+	#endif
+				#ifdef MULTI_SYNC
+					telemetry_set_input_sync(packet_period);
+				#endif
+				if(bind_counter)
+					if(--bind_counter==0)
+					{
+						BIND_DONE;
+						if(sub_protocol == FX620)
+						{
+							XN297_SetTXAddr(rx_tx_addr, 3);
+							packet_period = FX620_PACKET_PERIOD;
+						}
+						else if(sub_protocol >= FX9630)
+						{ // FX9630 & FX_Q560 & FX_QF012
+							XN297_SetTXAddr(rx_tx_addr, 4);
+	#ifdef FX_HUB_TELEMETRY
+							XN297_SetRXAddr(rx_tx_addr, FX_QF012_RX_PAYLOAD_SIZE);
+	#endif
+						}
+					}
+				FX_send_packet();
+	#ifdef FX_HUB_TELEMETRY
+				if(sub_protocol < FX9630)
+					break;
+				if(rx)
+				{
+					debug("RX");
+					if(XN297_ReadPayload(packet_in, FX_QF012_RX_PAYLOAD_SIZE))
+					{//Good CRC
+						//packets: A5 00 11 -> A5 01 11
+						telemetry_link = 1;
+						v_lipo1 = packet_in[1] ? 60:81;		// low voltage 3.7V
+						#if 0
+							for(uint8_t i=0; i < FX_QF012_RX_PAYLOAD_SIZE; i++)
+								debug(" %02X", packet_in[i]);
+						#endif
+					}
+					debugln();
+				}
+				phase++;
+				return FX9630_WRITE_TIME;
+			default: //FX_RX
+				/* { // Wait for packet to be sent before switching to receive mode
+					uint16_t start=(uint16_t)micros(), count=0;
+					while ((uint16_t)((uint16_t)micros()-(uint16_t)start) < 500)
+					{
+						if(XN297_IsPacketSent())
+							break;
+						count++;
+					}
+					debug("%d",count);
+				} */
+				//Switch to RX
+				XN297_SetTxRxMode(TXRX_OFF);
+				XN297_SetTxRxMode(RX_EN);
+				phase = FX_DATA;
+				return packet_period - FX9630_WRITE_TIME;
 		}
-	FX_send_packet();
+	#endif
 	return packet_period;
 }
 
@@ -262,6 +328,10 @@ void FX_init()
 	FX_RF_init();
 	hopping_frequency_no = 0;
 	bind_counter=FX_BIND_COUNT;
+	#ifdef FX_HUB_TELEMETRY
+		RX_RSSI = 100;		// Dummy value
+		phase = FX_DATA;
+	#endif
 }
 
 #endif

Multiprotocol/MT99xx_ccnrf.ino

@@ -189,8 +189,8 @@ static void __attribute__((unused)) MT99XX_send_packet()
 			packet[1] = convert_channel_16b_limit(RUDDER  ,0x00,0xE1);	// rudder
 			packet[2] = convert_channel_16b_limit(AILERON ,0xE1,0x00);	// aileron
 			packet[3] = convert_channel_16b_limit(ELEVATOR,0x00,0xE1);	// elevator
-			packet[4] = 0x20; 											// pitch trim (0x3f-0x20-0x00)
-			packet[5] = 0x20; 											// roll trim (0x00-0x20-0x3f)
+			packet[4] = (convert_channel_8b(CH10) ^ 0xFF) >> 2; 		// aileron trim  (3F..20..00)
+			packet[5] =  convert_channel_8b(CH11)         >> 2;			// elevator trim (00..20..3F)
 			packet[6] = GET_FLAG( CH5_SW, FLAG_MT_FLIP );
 			if(sub_protocol != PA18+8)
 				packet[7] = h7_mys_byte[hopping_frequency_no];			// next rf channel index ?
@@ -337,7 +337,7 @@ static void __attribute__((unused)) MT99XX_send_packet()
 	XN297_SetTxRxMode(TX_EN);
 	XN297_WritePayload(packet, MT99XX_PACKET_SIZE);
 	
-	#if 0
+	#if 1
 		for(uint8_t i=0; i<MT99XX_PACKET_SIZE; i++)
 			debug(" %02X",packet[i]);
 		debugln();

Multiprotocol/MouldKg_nrf24l01.ino

@@ -50,12 +50,19 @@ static void __attribute__((unused)) MOULDKG_send_packet()
 	else
 	{
 		uint8_t n = num_ch<<2;
-		if(sub_protocol == MOULDKG_ANALOG)
+		if(sub_protocol == MOULDKG_ANALOG4 || sub_protocol == MOULDKG_ANALOG6 )
 		{
 			packet[0] = 0x36;
-			uint8_t ch[]={ 1,0,2,3 };
-			for(uint8_t i=0;i<4;i++)
-				packet[i+4] = convert_channel_8b(ch[i]+n);
+			const uint8_t ch[]={ 1,0,2,3,5,4 };
+			if(sub_protocol == MOULDKG_ANALOG6)
+				n += num_ch<<1;
+			for(uint8_t i=0;i<6;i++)
+			{
+				if( (i > 3 && sub_protocol == MOULDKG_ANALOG4) || i + n > 15)
+					packet[i+4] = 0x80;							//Centered channel
+				else
+					packet[i+4] = convert_channel_8b(ch[i]+n);
+			}
 			len = MOULDKG_PAYLOAD_SIZE_ANALOG;
 		}
 		else

Multiprotocol/Multi.txt

@@ -25,7 +25,7 @@
 25,FrskyV
 26,HONTAI,HONTAI,JJRCX1,X5C1,FQ777_951,XKK170
 27,OpnLrs
-28,AFHDS2A,PWM_IBUS,PPM_IBUS,PWM_SBUS,PPM_SBUS,PWM_IB16,PPM_IB16,PWM_SB16,PPM_SB16
+28,AFHDS2A,PWM_IBUS,PPM_IBUS,PWM_SBUS,PPM_SBUS,Gyro_Off,Gyro_On,G_On_Rev
 29,Q2X2,Q222,Q242,Q282
 30,WK2x01,WK2801,WK2401,W6_5_1,W6_6_1,W6_HEL,W6_HEL_I
 31,Q303,Q303,CX35,CX10D,CX10WD
@@ -55,7 +55,7 @@
 55,Frsky_RX,Multi,CloneTX,EraseTX,CPPM
 56,AFHDS2A_RX,Multi,CPPM
 57,HoTT,Sync,No_Sync
-58,FX,816,620,9630,Q560
+58,FX,816,620,9630,Q560,QF012
 59,Bayang_RX,Multi,CPPM
 60,Pelikan,Pro,Lite,SCX24
 61,EazyRC
@@ -86,7 +86,7 @@
 87,IKEA
 88,WILLIFM
 89,Losi
-90,MouldKg,Analog,Digit
+90,MouldKg,A4444,D4444,A664
 91,Xerall
 92,MT99xx,PA18,SU35
 93,Kyosho2,KT-17
@@ -101,4 +101,4 @@
 103,H36
 104,KAMTOM
 105,Shenqi2
-106,WL91x
+106,WL91x

Multiprotocol/Multi_Protos.ino

@@ -147,7 +147,7 @@ const char STR_SUBTYPE_MT992[] =      "\x04""PA18""SU35";
 const char STR_SUBTYPE_MJXQ[] =       "\x07""WLH08\0 ""X600\0  ""X800\0  ""H26D\0  ""E010\0  ""H26WH\0 ""Phoenix";
 const char STR_SUBTYPE_FY326[] =      "\x05""Std\0 ""FY319";
 const char STR_SUBTYPE_HONTAI[] =     "\x06""Std\0  ""JJRCX1""X5C1\0 ""FQ_951""XKK170";
-const char STR_SUBTYPE_AFHDS2A[] =    "\x08""PWM,IBUS""PPM,IBUS""PWM,SBUS""PPM,SBUS""PWM,IB16""PPM,IB16""PWM,SB16""PPM,SB16";
+const char STR_SUBTYPE_AFHDS2A[] =    "\x08""PWM,IBUS""PPM,IBUS""PWM,SBUS""PPM,SBUS""Gyro_Off""Gyro_On\0""G_On_Rev";
 const char STR_SUBTYPE_Q2X2[] =       "\x04""Q222""Q242""Q282";
 const char STR_SUBTYPE_WK2x01[] =     "\x06""WK2801""WK2401""W6_5_1""W6_6_1""W6_HeL""W6_HeI";
 const char STR_SUBTYPE_Q303[] =       "\x06""Std\0  ""CX35\0 ""CX10D\0""CX10WD";
@@ -184,10 +184,10 @@ const char STR_SUBTYPE_KYOSHO2[] =    "\x05""KT-17";
 const char STR_SUBTYPE_KYOSHO3[] =    "\x03""ASF";
 const char STR_SUBTYPE_FUTABA[] =     "\x05""SFHSS";
 const char STR_SUBTYPE_JJRC345[] =    "\x08""JJRC345\0""SkyTmblr";
-const char STR_SUBTYPE_MOULDKG[] =    "\x06""Analog""Digit\0";
+const char STR_SUBTYPE_MOULDKG[] =    "\x05""A4444""D4444""A664\0";
 const char STR_SUBTYPE_KF606[] =      "\x06""KF606\0""MIG320""ZCZ50\0";
 const char STR_SUBTYPE_E129[] =       "\x04""E129""C186";
-const char STR_SUBTYPE_FX[] =         "\x04""816\0""620\0""9630""Q560";
+const char STR_SUBTYPE_FX[] =         "\x05""816\0 ""620\0 ""9630\0""Q560\0""QF012";
 const char STR_SUBTYPE_SGF22[] =      "\x04""F22\0""F22S""J20\0";
 const char STR_SUBTYPE_JIABAILE[] =   "\x04""Std\0""Gyro";
 #define NO_SUBTYPE		nullptr
@@ -307,7 +307,7 @@ const mm_protocol_definition multi_protocols[] = {
 		{PROTO_FLYSKY,     STR_FLYSKY,    STR_SUBTYPE_FLYSKY,    5, OPTION_NONE,    0, 1, SW_A7105,  FLYSKY_init,     FLYSKY_callback     },
 	#endif
 	#if defined(AFHDS2A_A7105_INO)
-		{PROTO_AFHDS2A,    STR_AFHDS2A,   STR_SUBTYPE_AFHDS2A,   8, OPTION_SRVFREQ, 1, 1, SW_A7105,  AFHDS2A_init,    AFHDS2A_callback    },
+		{PROTO_AFHDS2A,    STR_AFHDS2A,   STR_SUBTYPE_AFHDS2A,   7, OPTION_SRVFREQ, 1, 1, SW_A7105,  AFHDS2A_init,    AFHDS2A_callback    },
 	#endif
 	#if defined(AFHDS2A_RX_A7105_INO)
 		{PROTO_AFHDS2A_RX, STR_AFHDS2A_RX,STR_CPPM,       NBR_CPPM, OPTION_NONE,    0, 0, SW_A7105,  AFHDS2A_RX_init, AFHDS2A_RX_callback },
@@ -344,7 +344,7 @@ const mm_protocol_definition multi_protocols[] = {
 		{PROTO_FUTABA,     STR_FUTABA,    STR_SUBTYPE_FUTABA,    1, OPTION_RFTUNE,  1, 1, SW_CC2500, SFHSS_init,      SFHSS_callback      },
 	#endif
 	#if defined(FX_NRF24L01_INO)
-		{PROTO_FX,         STR_FX,        STR_SUBTYPE_FX,        4, OPTION_NONE,    0, 0, SW_NRF,    FX_init,         FX_callback         },
+		{PROTO_FX,         STR_FX,        STR_SUBTYPE_FX,        5, OPTION_NONE,    0, 0, SW_NRF,    FX_init,         FX_callback         },
 	#endif
 	#if defined(FY326_NRF24L01_INO)
 		{PROTO_FY326,      STR_FY326,     STR_SUBTYPE_FY326,     2, OPTION_NONE,    0, 0, SW_NRF,    FY326_init,      FY326_callback      },
@@ -425,7 +425,7 @@ const mm_protocol_definition multi_protocols[] = {
 		{PROTO_MLINK,      STR_MLINK,     NO_SUBTYPE,            0, OPTION_NONE,    1, 0, SW_CYRF,   MLINK_init,      MLINK_callback      },
 	#endif
 	#if defined(MOULDKG_NRF24L01_INO)
-		{PROTO_MOULDKG,    STR_MOULDKG,   STR_SUBTYPE_MOULDKG,   2, OPTION_OPTION,  0, 0, SW_NRF,    MOULDKG_init,    MOULDKG_callback    },
+		{PROTO_MOULDKG,    STR_MOULDKG,   STR_SUBTYPE_MOULDKG,   3, OPTION_OPTION,  0, 0, SW_NRF,    MOULDKG_init,    MOULDKG_callback    },
 	#endif
 	#if defined(MT99XX_CCNRF_INO)
 		{PROTO_MT99XX,     STR_MT99XX,    STR_SUBTYPE_MT99,      8, OPTION_NONE,    0, 0, SW_NRF,    MT99XX_init,     MT99XX_callback     },

Multiprotocol/Multiprotocol.h

@@ -19,7 +19,7 @@
 #define VERSION_MAJOR		1
 #define VERSION_MINOR		3
 #define VERSION_REVISION	4
-#define VERSION_PATCH_LEVEL	43
+#define VERSION_PATCH_LEVEL	50
 
 #define MODE_SERIAL 0
 
@@ -159,14 +159,13 @@ enum Hubsan
 };
 enum AFHDS2A
 {
-	PWM_IBUS = 0,
-	PPM_IBUS = 1,
-	PWM_SBUS = 2,
-	PPM_SBUS = 3,
-	PWM_IB16 = 4,
-	PPM_IB16 = 5,
-	PWM_SB16 = 6,
-	PPM_SB16 = 7,
+	PWM_IBUS			= 0,
+	PPM_IBUS			= 1,
+	PWM_SBUS			= 2,
+	PPM_SBUS			= 3,
+	AFHDS2A_GYRO_OFF	= 4,
+	AFHDS2A_GYRO_ON		= 5,
+	AFHDS2A_GYRO_ON_REV	= 6,
 };
 enum Hisky
 {
@@ -471,8 +470,9 @@ enum RLINK
 };
 enum MOULDKG
 {
-	MOULDKG_ANALOG	= 0,
-	MOULDKG_DIGIT	= 1,
+	MOULDKG_ANALOG4	= 0,
+	MOULDKG_DIGIT4	= 1,
+	MOULDKG_ANALOG6	= 2,
 };
 enum KF606
 {
@@ -491,6 +491,7 @@ enum FX
 	FX620			= 1,
     FX9630          = 2,
 	FX_Q560			= 3,
+	FX_QF012		= 4,
 };
 enum SGF22
 {

Multiprotocol/SGF22_nrf24l01.ino

@@ -20,21 +20,21 @@ Multiprotocol is distributed in the hope that it will be useful,
 
 //#define FORCE_SGF22_ORIGINAL_ID
 
-#define SGF22_PACKET_PERIOD			11950 //10240
-#define SGF22_BIND_RF_CHANNEL		78
-#define SGF22_PAYLOAD_SIZE			12
-#define SGF22_BIND_COUNT			50
-#define SGF22_RF_NUM_CHANNELS		4
-#define SGF22_F22S_BIND_RF_CHANNEL	10
-#define SGF22_J20_BIND_RF_CHANNEL  	28
+#define SGF22_PACKET_PERIOD				11950 //10240
+#define SGF22_BIND_RF_CHANNEL			78
+#define SGF22_PAYLOAD_SIZE				12
+#define SGF22_BIND_COUNT				50
+#define SGF22_RF_NUM_CHANNELS			4
+#define SGF22_F22S_BIND_RF_CHANNEL		10
+#define SGF22_J20_BIND_RF_CHANNEL  		28
 
 //packet[8]
-#define SGF22_FLAG_3D			0x00
-#define SGF22_FLAG_LIGHT		0x04
-#define SGF22_FLAG_ROLL			0x08
-#define SGF22_FLAG_VIDEO		0x10
-#define SGF22_FLAG_6G			0x40
-#define SGF22_FLAG_VERTICAL		0xC0
+#define SGF22_FLAG_3D					0x00
+#define SGF22_FLAG_LIGHT				0x04
+#define SGF22_FLAG_ROLL					0x08
+#define SGF22_FLAG_VIDEO				0x10
+#define SGF22_FLAG_6G					0x40
+#define SGF22_FLAG_VERTICAL				0xC0
 
 #define SGF22_J20_FLAG_HORIZONTAL		0x80
 //#define SGF22_J20_FLAG_SPEED			0x01	// Up/Down trim, not implemented
@@ -44,9 +44,18 @@ Multiprotocol is distributed in the hope that it will be useful,
 
 
 //packet[9]
-#define SGF22_FLAG_TRIMRESET		0x04
-#define SGF22_FLAG_PHOTO			0x40	// #define SGF22_J20_FLAG_INVERT  0x40
-#define SGF22_J20_FLAG_FIXHEIGHT	0x80
+#define SGF22_FLAG_TRIMRESET			0x04
+#define SGF22_FLAG_PHOTO				0x40	// #define SGF22_J20_FLAG_INVERT  0x40
+#define SGF22_J20_FLAG_FIXHEIGHT		0x80
+
+#define SGF22_WRITE_TIME				1000
+
+enum {
+	SGF22_DATA1,
+	SGF22_DATA2,
+	SGF22_DATA3,
+	SGF22_RX,
+};
 
 static void __attribute__((unused)) SGF22_send_packet()
 {
@@ -148,34 +157,80 @@ static void __attribute__((unused)) SGF22_RF_init()
 {
 	XN297_Configure(XN297_CRCEN, XN297_SCRAMBLED, XN297_1M);
 	XN297_SetTXAddr((uint8_t*)"\xC7\x95\x3C\xBB\xA5", 5);
+	#ifdef SGF22_HUB_TELEMETRY
+		XN297_SetRXAddr((uint8_t*)"\xC7\x95\x3C\xBB\xA5", SGF22_PAYLOAD_SIZE);
+	#endif
+
 	const uint8_t bind_chan[] = {SGF22_BIND_RF_CHANNEL, SGF22_F22S_BIND_RF_CHANNEL, SGF22_J20_BIND_RF_CHANNEL}; 
 	XN297_RFChannel(bind_chan[sub_protocol]);	// Set bind channel
 }
 
 uint16_t SGF22_callback()
 {
-	if(phase == 0)
+	#ifdef SGF22_HUB_TELEMETRY
+		bool rx = false;
+	#endif
+
+	switch(phase)
 	{
-		phase++;
-		#ifdef MULTI_SYNC
-			telemetry_set_input_sync(SGF22_PACKET_PERIOD);
-		#endif
-		SGF22_send_packet();
-		if(IS_BIND_IN_PROGRESS)
-		{
-			if(--bind_counter==0)
-				BIND_DONE;
-		}
-	}
-	else
-	{//send 3 times in total the same packet
-		XN297_ReSendPayload();
-		phase++;
-		if(phase > 2)
-		{
-			phase = 0;
-			return SGF22_PACKET_PERIOD - 2*1550;
-		}
+		case SGF22_DATA1:
+			#ifdef MULTI_SYNC
+				telemetry_set_input_sync(SGF22_PACKET_PERIOD);
+			#endif
+	#ifdef SGF22_HUB_TELEMETRY
+			rx = XN297_IsRX();
+			XN297_SetTxRxMode(TXRX_OFF);
+	#endif
+			SGF22_send_packet();
+			if(IS_BIND_IN_PROGRESS)
+			{
+				if(--bind_counter==0)
+					BIND_DONE;
+			}
+	#ifdef SGF22_HUB_TELEMETRY
+			if(rx)
+			{
+				uint8_t p_len = XN297_ReadEnhancedPayload(packet_in, SGF22_PAYLOAD_SIZE);
+				if(p_len == 3 && packet_in[0] == rx_tx_addr[2] && packet_in[1] == rx_tx_addr[3])
+				{//packets: 00 0B 00 -> 00 0B 01
+					telemetry_link = 1;
+					v_lipo1 = packet_in[2] ? 0 : 255;	//2.9V for 1S, 7.0V for 2S
+				}
+				#if 0
+					debug("L %d ",p_len);
+					debug("RX");
+					for(uint8_t i=0; i<SGF22_PAYLOAD_SIZE; i++)
+						debug(" %02X",packet_in[i]);
+					debugln("");
+				#endif
+			}
+	#endif
+			phase++;
+			break;
+		case SGF22_DATA2:
+		case SGF22_DATA3:
+			//send 3 times in total the same packet
+			XN297_ReSendPayload();
+			phase++;
+			break;
+		default: //SGF22_RX
+	#ifdef SGF22_HUB_TELEMETRY
+			/*{ // Wait for packet to be sent before switching to receive mode
+				uint16_t start=(uint16_t)micros(), count=0;
+				while ((uint16_t)((uint16_t)micros()-(uint16_t)start) < 500)
+				{
+					if(XN297_IsPacketSent())
+						break;
+					count++;
+				}
+				debugln("%d",count);
+			}*/
+			//Switch to RX
+			XN297_SetTxRxMode(TXRX_OFF);
+			XN297_SetTxRxMode(RX_EN);
+	#endif
+			phase = SGF22_DATA1;
+			return SGF22_PACKET_PERIOD - 3*1550;
 	}
 	return 1550;
 }
@@ -187,7 +242,10 @@ void SGF22_init()
 	SGF22_RF_init();
 	bind_counter=SGF22_BIND_COUNT;
 	packet_sent = packet_count = 0x26;	// TX2:26 TX3:26
-	phase = 0;
+	phase = SGF22_DATA1;
+	#ifdef SGF22_HUB_TELEMETRY
+		RX_RSSI = 100;		// Dummy value
+	#endif
 }
 
 #endif

Multiprotocol/Validate.h

@@ -390,7 +390,7 @@
 	#undef	LOSI_CYRF6936_INO		//Need DSM to be enabled
 	#undef	TRAXXAS_CYRF6936_INO
 	#undef	EAZYRC_NRF24L01_INO
-	#undef	KYOSHO2_NRF24L01_INO
+	//#undef	KYOSHO2_NRF24L01_INO
 	#undef	KYOSHO3_CYRF6936_INO
 	#undef	MOULDKG_NRF24L01_INO
 	#undef	SHENQI_NRF24L01_INO
@@ -399,6 +399,9 @@
 	#undef	UDIRC_CCNRF_INO
 	#undef	KAMTOM_NRF24L01_INO
 	#undef	WL91X_CCNRF_INO
+	//Save flash space...
+	#undef	CABELL_NRF24L01_INO
+	#undef	REDPINE_CC2500_INO
 #endif
 
 #ifdef MULTI_SURFACE
@@ -494,6 +497,9 @@
 	#undef PROPEL_HUB_TELEMETRY
 	#undef OMP_HUB_TELEMETRY
 	#undef V761_HUB_TELEMETRY
+	#undef FX_HUB_TELEMETRY
+	#undef XK2_HUB_TELEMETRY
+	#undef SGF22_HUB_TELEMETRY
 	#undef KAMTOM_HUB_TELEMETRY
 	#undef YUXIANG_HUB_TELEMETRY
 	#undef RLINK_HUB_TELEMETRY
@@ -534,6 +540,15 @@
 	#if not defined(V761_NRF24L01_INO)
 		#undef V761_HUB_TELEMETRY
 	#endif
+	#if not defined(FX_NRF24L01_INO)
+		#undef FX_HUB_TELEMETRY
+	#endif
+	#if not defined(XK2_CCNRF_INO)
+		#undef XK2_HUB_TELEMETRY
+	#endif
+	#if not defined(SGF22_NRF24L01_INO)
+		#undef SGF22_HUB_TELEMETRY
+	#endif
 	#if not defined(KAMTOM_NRF24L01_INO)
 		#undef KAMTOM_HUB_TELEMETRY
 	#endif
@@ -597,7 +612,7 @@
 		//protocols using FRSKYD user frames
 		#undef HUB_TELEMETRY 
 	#endif
-	#if not defined(HOTT_FW_TELEMETRY) && not defined(DSM_TELEMETRY) && not defined(SPORT_TELEMETRY) && not defined(HUB_TELEMETRY) && not defined(HUBSAN_HUB_TELEMETRY) && not defined(BUGS_HUB_TELEMETRY) && not defined(NCC1701_HUB_TELEMETRY) && not defined(BAYANG_HUB_TELEMETRY) && not defined(CABELL_HUB_TELEMETRY) && not defined(RLINK_HUB_TELEMETRY) && not defined(AFHDS2A_HUB_TELEMETRY) && not defined(AFHDS2A_FW_TELEMETRY) && not defined(MULTI_TELEMETRY) && not defined(MULTI_STATUS) && not defined(HITEC_HUB_TELEMETRY) && not defined(HITEC_FW_TELEMETRY) && not defined(SCANNER_TELEMETRY) && not defined(FRSKY_RX_TELEMETRY) && not defined(AFHDS2A_RX_TELEMETRY) && not defined(BAYANG_RX_TELEMETRY) && not defined(DEVO_HUB_TELEMETRY) && not defined(PROPEL_HUB_TELEMETRY) && not defined(OMP_HUB_TELEMETRY) && not defined(V761_HUB_TELEMETRY) && not defined(KAMTOM_HUB_TELEMETRY) && not defined(YUXIANG_HUB_TELEMETRY) && not defined(WFLY2_HUB_TELEMETRY) && not defined(LOLI_HUB_TELEMETRY) && not defined(MLINK_HUB_TELEMETRY) && not defined(MLINK_FW_TELEMETRY) && not defined(MT99XX_HUB_TELEMETRY) && not defined(MULTI_CONFIG_INO)
+	#if not defined(HOTT_FW_TELEMETRY) && not defined(DSM_TELEMETRY) && not defined(SPORT_TELEMETRY) && not defined(HUB_TELEMETRY) && not defined(HUBSAN_HUB_TELEMETRY) && not defined(BUGS_HUB_TELEMETRY) && not defined(NCC1701_HUB_TELEMETRY) && not defined(BAYANG_HUB_TELEMETRY) && not defined(CABELL_HUB_TELEMETRY) && not defined(RLINK_HUB_TELEMETRY) && not defined(AFHDS2A_HUB_TELEMETRY) && not defined(AFHDS2A_FW_TELEMETRY) && not defined(MULTI_TELEMETRY) && not defined(MULTI_STATUS) && not defined(HITEC_HUB_TELEMETRY) && not defined(HITEC_FW_TELEMETRY) && not defined(SCANNER_TELEMETRY) && not defined(FRSKY_RX_TELEMETRY) && not defined(AFHDS2A_RX_TELEMETRY) && not defined(BAYANG_RX_TELEMETRY) && not defined(DEVO_HUB_TELEMETRY) && not defined(PROPEL_HUB_TELEMETRY) && not defined(OMP_HUB_TELEMETRY) && not defined(V761_HUB_TELEMETRY) && not defined(SGF22_HUB_TELEMETRY) && not defined(XK2_HUB_TELEMETRY) && not defined(FX_HUB_TELEMETRY) && not defined(KAMTOM_HUB_TELEMETRY) && not defined(YUXIANG_HUB_TELEMETRY) && not defined(WFLY2_HUB_TELEMETRY) && not defined(LOLI_HUB_TELEMETRY) && not defined(MLINK_HUB_TELEMETRY) && not defined(MLINK_FW_TELEMETRY) && not defined(MT99XX_HUB_TELEMETRY) && not defined(MULTI_CONFIG_INO)
 		#undef TELEMETRY
 		#undef INVERT_TELEMETRY
 		#undef MULTI_TELEMETRY

Multiprotocol/XK2_ccnrf.ino

@@ -21,19 +21,30 @@ Multiprotocol is distributed in the hope that it will be useful,
 //#define FORCE_XK2_ID
 //#define FORCE_XK2_P10_ID
 
-#define XK2_RF_BIND_CHANNEL	71
+#define XK2_RF_BIND_CHANNEL		71
 #define XK2_P10_RF_BIND_CHANNEL	69
-#define XK2_PAYLOAD_SIZE	9
-#define XK2_PACKET_PERIOD	4911
-#define XK2_RF_NUM_CHANNELS	4
+#define XK2_PAYLOAD_SIZE		9
+#define XK2_PACKET_PERIOD		4911
+#define XK2_RF_NUM_CHANNELS		4
+#define XK2_WRITE_TIME			1000
 
 enum {
 	XK2_BIND1,
 	XK2_BIND2,
 	XK2_DATA_PREP,
-	XK2_DATA
+	XK2_DATA,
+	XK2_RX,
 };
 
+static uint8_t __attribute__((unused)) XK2_checksum(uint8_t init)
+{
+	for(uint8_t i=0; i<XK2_PAYLOAD_SIZE-1; i++)
+		init += packet[i];
+	if(sub_protocol == XK2_P10)
+		init += 0x10;
+	return init;
+}
+
 static void __attribute__((unused)) XK2_send_packet()
 {
 	static uint8_t trim_ch=0;
@@ -47,8 +58,6 @@ static void __attribute__((unused)) XK2_send_packet()
 		//memcpy(&packet[4], rx_id     , 3);
 		//Unknown
 		packet[7] = 0x00;
-		//Checksum seed
-		packet[8] = 0xC0;
 	}
 	else
 	{
@@ -71,21 +80,19 @@ static void __attribute__((unused)) XK2_send_packet()
 		}
 		//Flags
 		packet[5] = GET_FLAG(CH5_SW, 0x01)								//Rate
-				  | GET_FLAG(CH6_SW, 0x08)								//Mode
 				  | GET_FLAG(CH7_SW, 0x20)								//Hover
 				  | GET_FLAG(CH8_SW, 0x40);								//Light
-		//Telemetry not received=00, Telemetry received=01 but sometimes switch to 1 even if telemetry is not there...
-		packet[6] = 0x00;
+		if(CH6_SW)
+			packet[5] |= 0x10;											//Gyro off (senior mode)
+		else if(Channel_data[CH6] > CHANNEL_MIN_COMMAND)
+			packet[5] |= 0x08;											//3D
+		//Requiest telemetry flag
+		packet[6] = 0x01;
 		//RXID checksum
 		packet[7] = crc8;												//Sum RX_ID[0..2]
-		//Checksum seed
-		packet[8] = num_ch;												//Based on TX ID
 	}
 	//Checksum
-	for(uint8_t i=0; i<XK2_PAYLOAD_SIZE-1; i++)
-		packet[8] += packet[i];
-	if(sub_protocol == XK2_P10)
-		packet[8] += 0x10;
+	packet[8] = XK2_checksum(IS_BIND_IN_PROGRESS ? 0xC0 : num_ch);
 
 	// Send
 	XN297_SetFreqOffset();
@@ -156,6 +163,8 @@ static void __attribute__((unused)) XK2_initialize_txid()
 
 uint16_t XK2_callback()
 {
+	static bool rx = false;
+
 	switch(phase)
 	{
 		case XK2_BIND1:
@@ -174,13 +183,8 @@ uint16_t XK2_callback()
 						debug(" %02X",packet[i]);
 					debugln("");
 				#endif
-				crc8 = 0xBF;
-				for(uint8_t i=0; i<XK2_PAYLOAD_SIZE-1; i++)
-					crc8 += packet[i];
-				if(sub_protocol == XK2_P10)
-					crc8 += 0x10;
-				if(crc8 != packet[8])
-				{
+				if(XK2_checksum(0xBF) != packet[8])
+				{//Wrong checksum
 					phase = XK2_BIND1;
 					return 1000;
 				}
@@ -205,23 +209,67 @@ uint16_t XK2_callback()
 			XN297_SetTxRxMode(TXRX_OFF);
 			XN297_SetTxRxMode(TX_EN);
 			XN297_SetTXAddr(rx_tx_addr, 5);
+	#ifdef XK2_HUB_TELEMETRY
+			XN297_SetRXAddr(rx_tx_addr, XK2_PAYLOAD_SIZE);
+	#endif
 			BIND_DONE;
 			phase++;
 		case XK2_DATA:
 			#ifdef MULTI_SYNC
 				telemetry_set_input_sync(XK2_PACKET_PERIOD);
 			#endif
+	#ifdef XK2_HUB_TELEMETRY
+			rx = XN297_IsRX();
+			XN297_SetTxRxMode(TXRX_OFF);
+	#endif
+			XK2_send_packet();
+	#ifdef XK2_HUB_TELEMETRY
+			if(rx)
+			{
+				XN297_ReadPayload(packet, XK2_PAYLOAD_SIZE);
+				#if 0
+					debug("RX");
+					for(uint8_t i=0; i<XK2_PAYLOAD_SIZE; i++)
+						debug(" %02X",packet[i]);
+					debugln("");
+				#endif
+				if(XK2_checksum(0xCC) == packet[8] && memcmp(packet, rx_tx_addr, 3) == 0)
+				{//Good checksum and TXID
+					//packets: E5 20 F2 00 00 00 00 00 C3 -> E5 20 F2 80 00 00 00 00 43
+					telemetry_link = 1;
+					v_lipo1 = packet[3] ? 137:162;		// low voltage 7.1V
+				}
+			}
+	#endif
 			if(bind_counter)
 			{
 				bind_counter--;
 				if(bind_counter == 0)
-				{
 					phase = XK2_DATA_PREP;
-					//phase = XK2_BIND1;
-				}
+				break;
 			}
-			XK2_send_packet();
+	#ifndef XK2_HUB_TELEMETRY
 			break;
+	#else
+			phase++;
+			return XK2_WRITE_TIME;
+		default: //XK2_RX
+			/*{ // Wait for packet to be sent before switching to receive mode
+				uint16_t start=(uint16_t)micros(), count=0;
+				while ((uint16_t)((uint16_t)micros()-(uint16_t)start) < 500)
+				{
+					if(XN297_IsPacketSent())
+						break;
+					count++;
+				}
+				debugln("%d",count);
+			}*/
+			//Switch to RX
+			XN297_SetTxRxMode(TXRX_OFF);
+			XN297_SetTxRxMode(RX_EN);
+			phase = XK2_DATA;
+			return XK2_PACKET_PERIOD-XK2_WRITE_TIME;
+	#endif
 	}
 	return XK2_PACKET_PERIOD;
 }
@@ -238,6 +286,9 @@ void XK2_init()
 		phase = XK2_DATA_PREP;
 	bind_counter = 0;
 	hopping_frequency_no = 0;
+	#ifdef XK2_HUB_TELEMETRY
+		RX_RSSI = 100;		// Dummy value
+	#endif
 }
 
 #endif

Multiprotocol/_Config.h

@@ -211,7 +211,7 @@
 #define	FRSKYL_CC2500_INO
 #define	FRSKYD_CC2500_INO
 #define	FRSKYV_CC2500_INO
-#define	FRSKYX_CC2500_INO
+#define	FRSKYX_CC2500_INO		//Include FRSKYX2 protocol
 #define	FRSKY_RX_CC2500_INO
 #define	HITEC_CC2500_INO
 #define	HOTT_CC2500_INO
@@ -302,11 +302,6 @@
 //Enable DSM Forward Programming
 #define DSM_FWD_PGM
 
-//AFHDS2A specific settings
-//-------------------------
-//When enabled (remove the "//"), the below setting makes LQI (Link Quality Indicator) available on one of the RX ouput channel (5-14).
-//#define AFHDS2A_LQI_CH 14
-
 /**************************/
 /*** FAILSAFE SETTINGS  ***/
 /**************************/
@@ -354,14 +349,17 @@
 #define OMP_HUB_TELEMETRY			// Use FrSkyD Hub format to send telemetry to TX
 #define V761_HUB_TELEMETRY			// Use FrSkyD Hub format to send telemetry to TX
 #define KAMTOM_HUB_TELEMETRY		// Use FrSkyD Hub format to send telemetry to TX
-#define YUXIANG_HUB_TELEMETRY
+#define FX_HUB_TELEMETRY			// Use FrSkyD Hub format to send telemetry to TX
+#define XK2_HUB_TELEMETRY			// Use FrSkyD Hub format to send telemetry to TX
+#define SGF22_HUB_TELEMETRY			// Use FrSkyD Hub format to send telemetry to TX
+#define YUXIANG_HUB_TELEMETRY		// Use FrSkyD Hub format to send telemetry to TX
 #define PROPEL_HUB_TELEMETRY		// Use FrSkyD Hub format to send telemetry to TX
 #define CABELL_HUB_TELEMETRY		// Use FrSkyD Hub format to send telemetry to TX
 #define RLINK_HUB_TELEMETRY			// Use FrSkyD Hub format to send telemetry to TX
 #define WFLY2_HUB_TELEMETRY			// Use FrSkyD Hub format to send telemetry to TX
 #define LOLI_HUB_TELEMETRY			// Use FrSkyD Hub format to send telemetry to TX
 #define MT99XX_HUB_TELEMETRY		// Use FrSkyD Hub format to send telemetry to TX
-//#define MLINK_HUB_TELEMETRY			// Use FrSkyD Hub format to send telemetry to TX
+//#define MLINK_HUB_TELEMETRY		// Use FrSkyD Hub format to send telemetry to TX
 #define MLINK_FW_TELEMETRY			// Forward received telemetry packet directly to TX to be decoded by erskyTX and OpenTX
 //#define HITEC_HUB_TELEMETRY		// Use FrSkyD Hub format to send basic telemetry to the radios which can decode it like er9x, erskyTX and OpenTX
 #define HITEC_FW_TELEMETRY			// Forward received telemetry packets to be decoded by erskyTX and OpenTX
@@ -567,10 +565,9 @@ const PPM_Parameters PPM_prot[14*NBR_BANKS]=	{
 		PPM_IBUS
 		PWM_SBUS
 		PPM_SBUS
-		PWM_IB16
-		PPM_IB16
-		PWM_SB16
-		PPM_SB16
+		AFHDS2A_GYRO_OFF
+		AFHDS2A_GYRO_ON
+		AFHDS2A_GYRO_ON_REV
 	PROTO_AFHDS2A_RX
 		NONE
 	PROTO_ASSAN
@@ -700,6 +697,7 @@ const PPM_Parameters PPM_prot[14*NBR_BANKS]=	{
 		FX620
 		FX9630
 		Q560
+		QF012
 	PROTO_FY326
 		FY326
 		FY319
@@ -780,8 +778,9 @@ const PPM_Parameters PPM_prot[14*NBR_BANKS]=	{
 	PROTO_MLINK
 		NONE
 	PROTO_MOULDKG
-		MOULDKG_ANALOG
-		MOULDKG_DIGIT
+		MOULDKG_ANALOG4
+		MOULDKG_DIGIT4
+		MOULDKG_ANALOG6
 	PROTO_MT99XX
 		MT99
 		H7

Protocols_Details.md

@@ -61,107 +61,107 @@ You've upgraded the module but the radio does not display the name of the protoc
  
 # Available Protocol Table of Contents (Listed Alphabetically)
 
-Protocol Name|Protocol Number|Sub_Proto 0|Sub_Proto 1|Sub_Proto 2|Sub_Proto 3|Sub_Proto 4|Sub_Proto 5|Sub_Proto 6|Sub_Proto 7|RF Module|Emulation
----|---|---|---|---|---|---|---|---|---|---|---
-[Assan](Protocols_Details.md#ASSAN---24)|24|||||||||NRF24L01|
-[Bayang](Protocols_Details.md#BAYANG---14)|14|Bayang|H8S3D|X16_AH|IRDRONE|DHD_D4|QX100|||NRF24L01|XN297
-[Bayang RX](Protocols_Details.md#BAYANG-RX---59)|59|Multi|CPPM|||||||NRF24L01|XN297
-[BlueFly](Protocols_Details.md#BLUEFLY---95)|95|||||||||NRF24L01|
-[Bugs](Protocols_Details.md#BUGS---41)|41|||||||||A7105|
-[BugsMini](Protocols_Details.md#BUGSMINI---42)|42|BUGSMINI|BUGS3H|||||||NRF24L01|XN297
-[Cabell](Protocols_Details.md#Cabell---34)|34|Cabell_V3|C_TELEM|-|-|-|-|F_SAFE|UNBIND|NRF24L01|
-CFlie|38|CFlie||||||||NRF24L01|
-[CG023](Protocols_Details.md#CG023---13)|13|CG023|YD829|||||||NRF24L01|XN297
-[Corona](Protocols_Details.md#CORONA---37)|37|COR_V1|COR_V2|FD_V3||||||CC2500|
-[CX10](Protocols_Details.md#CX10---12)|12|GREEN|BLUE|DM007|-|J3015_1|J3015_2|MK33041||NRF24L01|XN297
-[Devo](Protocols_Details.md#DEVO---7)|7|Devo|8CH|10CH|12CH|6CH|7CH|||CYRF6936|
-[DM002](Protocols_Details.md#DM002---33)|33|||||||||NRF24L01|XN297
-[DSM](Protocols_Details.md#DSM---6)|6|DSM2_1F|DSM2_2F|DSMX_1F|DSMX_2F|AUTO|DSMR_1F|DSM2SFC||CYRF6936|
-[DSM_RX](Protocols_Details.md#DSM_RX---70)|70|Multi|CPPM|||||||CYRF6936|
-[E010R5](Protocols_Details.md#E010R5---81)|81|||||||||CYRF6936|RF2500
-[E016H](Protocols_Details.md#E016H---85)|85|||||||||NRF24L01|XN297
-[E016HV2](Protocols_Details.md#E016HV2---80)|80|||||||||CC2500/NRF24L01|unknown
-[E01X](Protocols_Details.md#E01X---45)|45|E012|E015|||||||CYRF6936|HS6200
-[E129](Protocols_Details.md#E129---83)|83|E129|C186|||||||CYRF6936|RF2500
-[EazyRC](Protocols_Details.md#EazyRC---61)|61|||||||||NRF24L01|XN297L
-[ESky](Protocols_Details.md#ESKY---16)|16|ESky|ET4|||||||NRF24L01|
-[ESky150](Protocols_Details.md#ESKY150---35)|35|||||||||NRF24L01|
-[ESky150V2](Protocols_Details.md#ESKY150V2---69)|69|||||||||CC2500|NRF51822
-[Flysky](Protocols_Details.md#FLYSKY---1)|1|Flysky|V9x9|V6x6|V912|CX20||||A7105|
-[Flysky AFHDS2A](Protocols_Details.md#FLYSKY-AFHDS2A---28)|28|PWM_IBUS|PPM_IBUS|PWM_SBUS|PPM_SBUS|PWM_IBUS16|PPM_IBUS16|PWM_SBUS16|PPM_SBUS16|A7105|
-[Flysky AFHDS2A RX](Protocols_Details.md#FLYSKY-AFHDS2A-RX---56)|56|Multi|CPPM|||||||A7105|
-[FQ777](Protocols_Details.md#FQ777---23)|23|||||||||NRF24L01|SSV7241
-[FrskyD](Protocols_Details.md#FRSKYD---3)|3|D8|Cloned|||||||CC2500|
-[FrskyL](Protocols_Details.md#FRSKYL---67)|67|LR12|LR12 6CH|||||||CC2500|
-[FrskyR9](Protocols_Details.md#FRSKYR9---65)|65|FrskyR9|R9_915|R9_868||||||SX1276|
-[FrskyV](Protocols_Details.md#FRSKYV---25)|25|||||||||CC2500|
-[FrskyX](Protocols_Details.md#FRSKYX---15)|15|CH_16|CH_8|EU_16|EU_8|Cloned|Cloned_8|||CC2500|
-[FrskyX2](Protocols_Details.md#FRSKYX2---64)|64|CH_16|CH_8|EU_16|EU_8|Cloned|Cloned_8|||CC2500|
-[Frsky_RX](Protocols_Details.md#FRSKY_RX---55)|55|Multi|CloneTX|EraseTX|CPPM|||||CC2500|
-[Futaba/SFHSS](Protocols_Details.md#Futaba---21)|21|SFHSS||||||||CC2500|
-[FX](Protocols_Details.md#FX---58)|28|816|620|9630|Q560|||||NRF24L01|
-[FY326](Protocols_Details.md#FY326---20)|20|FY326|FY319|||||||NRF24L01|
-[GD00X](Protocols_Details.md#GD00X---47)|47|GD_V1*|GD_V2*|||||||NRF24L01|XN297L
-[GW008](Protocols_Details.md#GW008---32)|32|||||||||NRF24L01|XN297
-[H36](Protocols_Details.md#H36---103)|H36|||||||||NRF24L01|XN297
-[H8_3D](Protocols_Details.md#H8_3D---36)|36|H8_3D|H20H|H20Mini|H30Mini|||||NRF24L01|XN297
-[Height](Protocols_Details.md#HEIGHT---53)|53|5ch|8ch|||||||A7105|
-[Hisky](Protocols_Details.md#HISKY---4)|4|Hisky|HK310|||||||NRF24L01|
-[Hitec](Protocols_Details.md#HITEC---39)|39|OPT_FW|OPT_HUB|MINIMA||||||CC2500|
-[Hontai](Protocols_Details.md#HONTAI---26)|26|HONTAI|JJRCX1|X5C1|FQ777_951|XKK170||||NRF24L01|XN297
-[HoTT](Protocols_Details.md#HoTT---57)|57|Sync|No_Sync|||||||CC2500|
-[Hubsan](Protocols_Details.md#HUBSAN---2)|2|H107|H301|H501||||||A7105|
-[J6Pro](Protocols_Details.md#J6Pro---22)|22|||||||||CYRF6936|
-[JIABAILE](Protocols_Details.md#JIABAILE---102)|102|Std|Gyro|||||||NRF24L01|XN297
-[JJRC345](Protocols_Details.md#JJRC345---71)|71|JJRC345|SkyTmblr|||||||NRF24L01|XN297
-[JOYSWAY](Protocols_Details.md#JOYSWAY---84)|84|||||||||NRF24L01|XN297
-[KAMTOM](Protocols_Details.md#KAMTOM---104)|104|||||||||NRF24L01|XN297
-[KF606](Protocols_Details.md#KF606---49)|49|KF606|MIG320|ZCZ50||||||NRF24L01|XN297
-[KN](Protocols_Details.md#KN---9)|9|WLTOYS|FEILUN|||||||NRF24L01|
-[Kyosho](Protocols_Details.md#Kyosho---73)|73|FHSS|Hype|||||||A7105|
-[Kyosho2](Protocols_Details.md#Kyosho2---93)|93|KT-17||||||||NRF24L01|
-[Kyosho3](Protocols_Details.md#Kyosho3---98)|98|ASF||||||||CYRF6936|
-[LOLI](Protocols_Details.md#LOLI---82)|82|||||||||NRF24L01|
-[Losi](Protocols_Details.md#Losi---89)|89|||||||||CYRF6936|
-[MJXq](Protocols_Details.md#MJXQ---18)|18|WLH08|X600|X800|H26D|E010*|H26WH|PHOENIX*||NRF24L01|XN297
-[MLINK](Protocols_Details.md#MLINK---78)|78|||||||||CYRF6936|
-[MouldKg](Protocols_Details.md#mouldkg---90)|90|Analog|Digit|||||||NRF24L01|XN297
-[MT99xx](Protocols_Details.md#MT99XX---17)|17|MT|H7|YZ|LS|FY805|A180|DRAGON|F949G|NRF24L01|XN297
-[MT99xx2](Protocols_Details.md#MT99XX2---92)|92|PA18|SU35|||||||NRF24L01|XN297
-[NCC1701](Protocols_Details.md#NCC1701---44)|44|||||||||NRF24L01|
-[OMP](Protocols_Details.md#OMP---77)|77|||||||||CC2500&NRF24L01|XN297L
-[OpenLRS](Protocols_Details.md#OpenLRS---27)|27|||||||||None|
-[Pelikan](Protocols_Details.md#Pelikan---60)|60|Pro|Lite|SCX24||||||A7105|
-[Potensic](Protocols_Details.md#Potensic---51)|51|A20||||||||NRF24L01|XN297
-[PROPEL](Protocols_Details.md#PROPEL---66)|66|74-Z||||||||NRF24L01|
-[Q2X2](Protocols_Details.md#Q2X2---29)|29|Q222|Q242|Q282||||||NRF24L01|
-[Q303](Protocols_Details.md#Q303---31)|31|Q303|CX35|CX10D|CX10WD|||||NRF24L01|XN297
-[Q90C](Protocols_Details.md#Q90C---72)|72|Q90C*||||||||NRF24L01|XN297
-[RadioLink](Protocols_Details.md#RadioLink---74)|74|Surface|Air|DumboRC|RC4G|||||CC2500|
-[Realacc](Protocols_Details.md#Realacc---76)|76|R11||||||||NRF24L01|
-[Redpine](Protocols_Details.md#Redpine---50)|50|FAST|SLOW|||||||NRF24L01|XN297
-[Scanner](Protocols_Details.md#Scanner---54)|54|||||||||CC2500|
-[Scorpio](Protocols_Details.md#Scorpio---94)|94|||||||||CYRF6936|
-[SGF22](Protocols_Details.md#SGF22---97)|97|F22|F22S|J20||||||NRF24L01|XN297
-[Shenqi](Protocols_Details.md#Shenqi---19)|19|Shenqi||||||||NRF24L01|LT8900
-[Shenqi2](Protocols_Details.md#Shenqi2---105)|105|Shenqi2||||||||NRF24L01|XN297
-[Skyartec](Protocols_Details.md#Skyartec---68)|68|||||||||CC2500|CC2500
-[SLT](Protocols_Details.md#SLT---11)|11|SLT_V1|SLT_V2|Q100|Q200|MR100|V1_4CH|RF_SIM||NRF24L01|CC2500
-[SymaX](Protocols_Details.md#Symax---10)|10|SYMAX|SYMAX5C|||||||NRF24L01|
-[Traxxas](Protocols_Details.md#Traxxas---43)|43|TQ2|TQ1|||||||CYRF6936|
-[V2x2](Protocols_Details.md#V2X2---5)|5|V2x2|JXD506|MR101||||||NRF24L01|
-[V761](Protocols_Details.md#V761---48)|48|3CH|4CH|TOPRC||||||NRF24L01|XN297
-[V911S](Protocols_Details.md#V911S---46)|46|V911S*|E119*|||||||NRF24L01|XN297
-[WFLY](Protocols_Details.md#WFLY---40)|40|WFR0x||||||||CYRF6936|
-[WFLY2](Protocols_Details.md#WFLY2---79)|79|RF20x||||||||A7105|
-[WK2x01](Protocols_Details.md#WK2X01---30)|30|WK2801|WK2401|W6_5_1|W6_6_1|W6_HEL|W6_HEL_I|||CYRF6936|
-[WL91X](Protocols_Details.md#WL91X---106)|106|||||||||NRF24L011&CC2500|XN297
-[XERALL](Protocols_Details.md#XERALL---91)|91|Tank||||||||NRF24L01|XN297
-[XK](Protocols_Details.md#XK---62)|62|X450|X420|Cars||||||NRF24L011&CC2500|XN297
-[XK2](Protocols_Details.md#XK2---99)|99|X4|P10|||||||NRF24L01&CC2500|XN297
-[YD717](Protocols_Details.md#YD717---8)|8|YD717|SKYWLKR|SYMAX4|XINXUN|NIHUI||||NRF24L01|
-[YuXiang](Protocols_Details.md#YuXiang---100)|100|||||||||NRF24L01|XN297
-[ZSX](Protocols_Details.md#ZSX---52)|52|280||||||||NRF24L01|XN297
+Protocol Name|Build|Protocol Number|Sub_Proto 0|Sub_Proto 1|Sub_Proto 2|Sub_Proto 3|Sub_Proto 4|Sub_Proto 5|Sub_Proto 6|Sub_Proto 7|RF Module|Emulation
+---|---|---|---|---|---|---|---|---|---|---|---|---
+[Assan](Protocols_Details.md#ASSAN---24)|AIR/SFC|24|||||||||NRF24L01|
+[Bayang](Protocols_Details.md#BAYANG---14)|AIR/SFC|14|Bayang|H8S3D|X16_AH|IRDRONE|DHD_D4|QX100|||NRF24L01|XN297
+[Bayang RX](Protocols_Details.md#BAYANG-RX---59)|AIR/SFC|59|Multi|CPPM|||||||NRF24L01|XN297
+[BlueFly](Protocols_Details.md#BLUEFLY---95)||95|||||||||NRF24L01|
+[Bugs](Protocols_Details.md#BUGS---41)|AIR|41|||||||||A7105|
+[BugsMini](Protocols_Details.md#BUGSMINI---42)|AIR|42|BUGSMINI|BUGS3H|||||||NRF24L01|XN297
+[Cabell](Protocols_Details.md#Cabell---34)||34|Cabell_V3|C_TELEM|-|-|-|-|F_SAFE|UNBIND|NRF24L01|
+CFlie|AIR|38|CFlie||||||||NRF24L01|
+[CG023](Protocols_Details.md#CG023---13)|AIR|13|CG023|YD829|||||||NRF24L01|XN297
+[Corona](Protocols_Details.md#CORONA---37)|AIR/SFC|37|COR_V1|COR_V2|FD_V3||||||CC2500|
+[CX10](Protocols_Details.md#CX10---12)|AIR|12|GREEN|BLUE|DM007|-|J3015_1|J3015_2|MK33041||NRF24L01|XN297
+[Devo](Protocols_Details.md#DEVO---7)|AIR/SFC|7|Devo|8CH|10CH|12CH|6CH|7CH|||CYRF6936|
+[DM002](Protocols_Details.md#DM002---33)|AIR|33|||||||||NRF24L01|XN297
+[DSM](Protocols_Details.md#DSM---6)|AIR/SFC|6|DSM2_1F|DSM2_2F|DSMX_1F|DSMX_2F|AUTO|DSMR_1F|DSM2SFC||CYRF6936|
+[DSM_RX](Protocols_Details.md#DSM_RX---70)|AIR/SFC|70|Multi|CPPM|||||||CYRF6936|
+[E010R5](Protocols_Details.md#E010R5---81)|AIR|81|||||||||CYRF6936|RF2500
+[E016H](Protocols_Details.md#E016H---85)||85|||||||||NRF24L01|XN297
+[E016HV2](Protocols_Details.md#E016HV2---80)||80|||||||||CC2500/NRF24L01|unknown
+[E01X](Protocols_Details.md#E01X---45)||45|E012|E015|||||||CYRF6936|HS6200
+[E129](Protocols_Details.md#E129---83)||83|E129|C186|||||||CYRF6936|RF2500
+[EazyRC](Protocols_Details.md#EazyRC---61)||61|||||||||NRF24L01|XN297L
+[ESky](Protocols_Details.md#ESKY---16)||16|ESky|ET4|||||||NRF24L01|
+[ESky150](Protocols_Details.md#ESKY150---35)||35|||||||||NRF24L01|
+[ESky150V2](Protocols_Details.md#ESKY150V2---69)||69|||||||||CC2500|NRF51822
+[Flysky](Protocols_Details.md#FLYSKY---1)||1|Flysky|V9x9|V6x6|V912|CX20||||A7105|
+[Flysky AFHDS2A](Protocols_Details.md#FLYSKY-AFHDS2A---28)||28|PWM_IBUS|PPM_IBUS|PWM_SBUS|PPM_SBUS|Gyro_Off|Gyro_On|Gyro_On_Rev||A7105|
+[Flysky AFHDS2A RX](Protocols_Details.md#FLYSKY-AFHDS2A-RX---56)||56|Multi|CPPM|||||||A7105|
+[FQ777](Protocols_Details.md#FQ777---23)||23|||||||||NRF24L01|SSV7241
+[FrskyD](Protocols_Details.md#FRSKYD---3)||3|D8|Cloned|||||||CC2500|
+[FrskyL](Protocols_Details.md#FRSKYL---67)||67|LR12|LR12 6CH|||||||CC2500|
+[FrskyR9](Protocols_Details.md#FRSKYR9---65)||65|FrskyR9|R9_915|R9_868||||||SX1276|
+[FrskyV](Protocols_Details.md#FRSKYV---25)||25|||||||||CC2500|
+[FrskyX](Protocols_Details.md#FRSKYX---15)||15|CH_16|CH_8|EU_16|EU_8|Cloned|Cloned_8|||CC2500|
+[FrskyX2](Protocols_Details.md#FRSKYX2---64)||64|CH_16|CH_8|EU_16|EU_8|Cloned|Cloned_8|||CC2500|
+[Frsky_RX](Protocols_Details.md#FRSKY_RX---55)||55|Multi|CloneTX|EraseTX|CPPM|||||CC2500|
+[Futaba/SFHSS](Protocols_Details.md#Futaba---21)||21|SFHSS||||||||CC2500|
+[FX](Protocols_Details.md#FX---58)||28|816|620|9630|Q560|QF012||||NRF24L01|
+[FY326](Protocols_Details.md#FY326---20)||20|FY326|FY319|||||||NRF24L01|
+[GD00X](Protocols_Details.md#GD00X---47)||47|GD_V1*|GD_V2*|||||||NRF24L01|XN297L
+[GW008](Protocols_Details.md#GW008---32)||32|||||||||NRF24L01|XN297
+[H36](Protocols_Details.md#H36---103)||H36|||||||||NRF24L01|XN297
+[H8_3D](Protocols_Details.md#H8_3D---36)||36|H8_3D|H20H|H20Mini|H30Mini|||||NRF24L01|XN297
+[Height](Protocols_Details.md#HEIGHT---53)||53|5ch|8ch|||||||A7105|
+[Hisky](Protocols_Details.md#HISKY---4)||4|Hisky|HK310|||||||NRF24L01|
+[Hitec](Protocols_Details.md#HITEC---39)||39|OPT_FW|OPT_HUB|MINIMA||||||CC2500|
+[Hontai](Protocols_Details.md#HONTAI---26)||26|HONTAI|JJRCX1|X5C1|FQ777_951|XKK170||||NRF24L01|XN297
+[HoTT](Protocols_Details.md#HoTT---57)||57|Sync|No_Sync|||||||CC2500|
+[Hubsan](Protocols_Details.md#HUBSAN---2)||2|H107|H301|H501||||||A7105|
+[J6Pro](Protocols_Details.md#J6Pro---22)||22|||||||||CYRF6936|
+[JIABAILE](Protocols_Details.md#JIABAILE---102)||102|Std|Gyro|||||||NRF24L01|XN297
+[JJRC345](Protocols_Details.md#JJRC345---71)||71|JJRC345|SkyTmblr|||||||NRF24L01|XN297
+[JOYSWAY](Protocols_Details.md#JOYSWAY---84)||84|||||||||NRF24L01|XN297
+[KAMTOM](Protocols_Details.md#KAMTOM---104)||104|||||||||NRF24L01|XN297
+[KF606](Protocols_Details.md#KF606---49)||49|KF606|MIG320|ZCZ50||||||NRF24L01|XN297
+[KN](Protocols_Details.md#KN---9)||9|WLTOYS|FEILUN|||||||NRF24L01|
+[Kyosho](Protocols_Details.md#Kyosho---73)||73|FHSS|Hype|||||||A7105|
+[Kyosho2](Protocols_Details.md#Kyosho2---93)||93|KT-17||||||||NRF24L01|
+[Kyosho3](Protocols_Details.md#Kyosho3---98)||98|ASF||||||||CYRF6936|
+[LOLI](Protocols_Details.md#LOLI---82)||82|||||||||NRF24L01|
+[Losi](Protocols_Details.md#Losi---89)||89|||||||||CYRF6936|
+[MJXq](Protocols_Details.md#MJXQ---18)||18|WLH08|X600|X800|H26D|E010*|H26WH|PHOENIX*||NRF24L01|XN297
+[MLINK](Protocols_Details.md#MLINK---78)||78|||||||||CYRF6936|
+[MouldKg](Protocols_Details.md#mouldkg---90)||90|A4444|D4444|A664||||||NRF24L01|XN297
+[MT99xx](Protocols_Details.md#MT99XX---17)||17|MT|H7|YZ|LS|FY805|A180|DRAGON|F949G|NRF24L01|XN297
+[MT99xx2](Protocols_Details.md#MT99XX2---92)||92|PA18|SU35|||||||NRF24L01|XN297
+[NCC1701](Protocols_Details.md#NCC1701---44)||44|||||||||NRF24L01|
+[OMP](Protocols_Details.md#OMP---77)||77|||||||||CC2500&NRF24L01|XN297L
+[OpenLRS](Protocols_Details.md#OpenLRS---27)||27|||||||||None|
+[Pelikan](Protocols_Details.md#Pelikan---60)||60|Pro|Lite|SCX24||||||A7105|
+[Potensic](Protocols_Details.md#Potensic---51)||51|A20||||||||NRF24L01|XN297
+[PROPEL](Protocols_Details.md#PROPEL---66)||66|74-Z||||||||NRF24L01|
+[Q2X2](Protocols_Details.md#Q2X2---29)||29|Q222|Q242|Q282||||||NRF24L01|
+[Q303](Protocols_Details.md#Q303---31)||31|Q303|CX35|CX10D|CX10WD|||||NRF24L01|XN297
+[Q90C](Protocols_Details.md#Q90C---72)||72|Q90C*||||||||NRF24L01|XN297
+[RadioLink](Protocols_Details.md#RadioLink---74)||74|Surface|Air|DumboRC|RC4G|||||CC2500|
+[Realacc](Protocols_Details.md#Realacc---76)||76|R11||||||||NRF24L01|
+[Redpine](Protocols_Details.md#Redpine---50)||50|FAST|SLOW|||||||NRF24L01|XN297
+[Scanner](Protocols_Details.md#Scanner---54)||54|||||||||CC2500|
+[Scorpio](Protocols_Details.md#Scorpio---94)||94|||||||||CYRF6936|
+[SGF22](Protocols_Details.md#SGF22---97)||97|F22|F22S|J20||||||NRF24L01|XN297
+[Shenqi](Protocols_Details.md#Shenqi---19)||19|Shenqi||||||||NRF24L01|LT8900
+[Shenqi2](Protocols_Details.md#Shenqi2---105)||105|Shenqi2||||||||NRF24L01|XN297
+[Skyartec](Protocols_Details.md#Skyartec---68)||68|||||||||CC2500|CC2500
+[SLT](Protocols_Details.md#SLT---11)||11|SLT_V1|SLT_V2|Q100|Q200|MR100|V1_4CH|RF_SIM||NRF24L01|CC2500
+[SymaX](Protocols_Details.md#Symax---10)||10|SYMAX|SYMAX5C|||||||NRF24L01|
+[Traxxas](Protocols_Details.md#Traxxas---43)||43|TQ2|TQ1|||||||CYRF6936|
+[V2x2](Protocols_Details.md#V2X2---5)||5|V2x2|JXD506|MR101||||||NRF24L01|
+[V761](Protocols_Details.md#V761---48)||48|3CH|4CH|TOPRC||||||NRF24L01|XN297
+[V911S](Protocols_Details.md#V911S---46)||46|V911S*|E119*|||||||NRF24L01|XN297
+[WFLY](Protocols_Details.md#WFLY---40)||40|WFR0x||||||||CYRF6936|
+[WFLY2](Protocols_Details.md#WFLY2---79)||79|RF20x||||||||A7105|
+[WK2x01](Protocols_Details.md#WK2X01---30)||30|WK2801|WK2401|W6_5_1|W6_6_1|W6_HEL|W6_HEL_I|||CYRF6936|
+[WL91X](Protocols_Details.md#WL91X---106)||106|||||||||NRF24L011&CC2500|XN297
+[XERALL](Protocols_Details.md#XERALL---91)||91|Tank||||||||NRF24L01|XN297
+[XK](Protocols_Details.md#XK---62)||62|X450|X420|Cars||||||NRF24L011&CC2500|XN297
+[XK2](Protocols_Details.md#XK2---99)||99|X4|P10|||||||NRF24L01&CC2500|XN297
+[YD717](Protocols_Details.md#YD717---8)||8|YD717|SKYWLKR|SYMAX4|XINXUN|NIHUI||||NRF24L01|
+[YuXiang](Protocols_Details.md#YuXiang---100)||100|||||||||NRF24L01|XN297
+[ZSX](Protocols_Details.md#ZSX---52)||52|280||||||||NRF24L01|XN297
 * "*" Sub Protocols designated by * suffix are using a XN297L@250kbps which will be emulated by default with the NRF24L01. If option (freq tune) is diffrent from 0, the CC2500 module (if installed) will be used instead. Each specific sub protocol has a more detailed explanation.
 
 # A7105 RF Module
@@ -227,36 +227,59 @@ Telemetry enabled protocol:
  - if using erskyTX and OpenTX: full telemetry information available
  - if telemetry is incomplete (missing RX RSSI for example), it means that you have to upgrade your RX firmware to version 1.6 or later. You can do it from an original Flysky TX or using a STLink like explained in [this tutorial](https://www.rcgroups.com/forums/showthread.php?2677694-How-to-upgrade-Flysky-Turnigy-iA6B-RX-to-firmware-1-6-with-a-ST-Link).
 
+LQI: Link Quality Indicator which is sent back to the RX on CH17
+
 Option is used to change the servo refresh rate. A value of 0 gives 50Hz (min), 70 gives 400Hz (max). Specific refresh rate value can be calculated like this option=(refresh_rate-50)/5.
 
 **RX_Num is used to give a number a given RX. You must use a different RX_Num per RX. A maximum of 64 AFHDS2A RXs are supported.**
 
-AFHDS2A_LQI_CH is a feature which is disabled by defaut in the _config.h file. When enabled, it makes LQI (Link Quality Indicator) available on one of the RX ouput channel (5-14).
-
-CH1|CH2|CH3|CH4|CH5|CH6|CH7|CH8|CH9|CH10|CH11|CH12|CH13|CH14
----|---|---|---|---|---|---|---|---|---|---|---|---|---
-A|E|T|R|CH5|CH6|CH7|CH8|CH9|CH10|CH11|CH12|CH13|CH14
-
-RX output will match the Flysky standard AETR independently of the input configuration AETR, RETA... unless on OpenTX 2.3.3+ you use the "Disable channel mapping" feature on the GUI.
-
 ### Sub_protocol PWM_IBUS - *0*
+CH1|CH2|CH3|CH4|CH5|CH6|CH7|CH8|CH9|CH10|CH11|CH12|CH13|CH14|CH15|CH16|CH17
+---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---
+A|E|T|R|CH5|CH6|CH7|CH8|CH9|CH10|CH11|CH12|CH13|CH14CH15|CH16|LQI
+
+RX output will match the Flysky standard AETR.
+
 ### Sub_protocol PPM_IBUS - *1*
+CH1|CH2|CH3|CH4|CH5|CH6|CH7|CH8|CH9|CH10|CH11|CH12|CH13|CH14|CH15|CH16|CH17
+---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---
+A|E|T|R|CH5|CH6|CH7|CH8|CH9|CH10|CH11|CH12|CH13|CH14CH15|CH16|LQI
+
+RX output will match the Flysky standard AETR.
+
 ### Sub_protocol PWM_SBUS - *2*
-### Sub_protocol PPM_SBUS - *3*
-As stated above.
+CH1|CH2|CH3|CH4|CH5|CH6|CH7|CH8|CH9|CH10|CH11|CH12|CH13|CH14|CH15|CH16|CH17
+---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---
+A|E|T|R|CH5|CH6|CH7|CH8|CH9|CH10|CH11|CH12|CH13|CH14CH15|CH16|LQI
 
-### Sub_protocol PWM_IBUS16 - *4*
-### Sub_protocol PPM_IBUS16 - *5*
-### Sub_protocol PWM_SBUS16 - *6*
-### Sub_protocol PPM_SBUS16 - *7*
+RX output will match the Flysky standard AETR.
 
-3 additional channels. Need recent or updated RXs.
+### Sub_protocol Gyro_Off - *3*
+RXs: FS-BS6, FS-BS4
 
-CH15|CH16|CH17
----|---|---
-CH15|CH16|LQI
+Gyro is off
 
-LQI: Link Quality Indicator
+CH1|CH2|CH3|CH4|CH5|CH6|CH7|CH8|CH9|CH10|CH11|CH12|CH13|CH14|CH15|CH16|CH17
+---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---
+CH1|CH2|CH3|CH4|CH5|CH6|CH7|CH8|CH9|CH10|CH11|CH12|-|-|-|-|LQI
+
+### Sub_protocol Gyro_On - *4*
+RXs: FS-BS6, FS-BS4
+
+Gyro is on
+
+CH1|CH2|CH3|CH4|CH5|CH6|CH7|CH8|CH9|CH10|CH11|CH12|CH13|CH14|CH15|CH16|CH17
+---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---
+CH1|CH2|CH3|CH4|CH5|CH6|CH7|CH8|CH9|CH10|CH11|CH12|ST_Gain|TH_Gain|Priority|Calib|LQI
+
+### Sub_protocol Gyro_On_Rev - *5*
+RXs: FS-BS6, FS-BS4
+
+Gyro is on and reversed
+
+CH1|CH2|CH3|CH4|CH5|CH6|CH7|CH8|CH9|CH10|CH11|CH12|CH13|CH14|CH15|CH16|CH17
+---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---
+CH1|CH2|CH3|CH4|CH5|CH6|CH7|CH8|CH9|CH10|CH11|CH12|ST_Gain|TH_Gain|Priority|Calib|LQI
 
 ## FLYSKY AFHDS2A RX - *56*
 The Flysky AFHDS2A receiver protocol enables master/slave trainning, separate access from 2 different radios to the same model,...
@@ -1185,16 +1208,22 @@ If only a NRF24L01 is installed then this sub protocol might be problematic beca
 ## MT99XX - *17*
 Autobind protocol
 
-CH1|CH2|CH3|CH4|CH5|CH6|CH7|CH8|CH9
----|---|---|---|---|---|---|---|---
-A|E|T|R|FLIP|LED|PICTURE|VIDEO|HEADLESS
-
-CC2500: only YZ is supported.
+CC2500: only YZ and F949G are supported.
 
 ### Sub_protocol MT99 - *0*
 Models: MT99xx
+
+CH1|CH2|CH3|CH4|CH5|CH6|CH7|CH8|CH9|CH10|CH11
+---|---|---|---|---|---|---|---|---|---|---
+A|E|T|R|FLIP|LED|PICTURE|VIDEO|HEADLESS|ATrim|ETrim
+
 ### Sub_protocol H7 - *1*
 Models: Eachine H7, Cheerson CX023
+
+CH1|CH2|CH3|CH4|CH5|CH6|CH7|CH8|CH9|CH10|CH11
+---|---|---|---|---|---|---|---|---|---|---
+A|E|T|R|FLIP|LED|PICTURE|VIDEO|HEADLESS|ATrim|ETrim
+
 ### Sub_protocol YZ - *2*
 Model: Yi Zhan i6S
 
@@ -1204,63 +1233,71 @@ If a CC2500 is installed it will be used for this sub protocol. Option in this c
 
 If only a NRF24L01 is installed then this sub protocol might be problematic because it is using the xn297L emulation with a transmission speed of 250kbps which doesn't work very well with every NRF24L01, this is an hardware issue with the authenticity and accuracy of the components.
 
+CH1|CH2|CH3|CH4|CH5|CH6|CH7|CH8|CH9|CH10|CH11
+---|---|---|---|---|---|---|---|---|---|---
+A|E|T|R|FLIP|LED|PICTURE|VIDEO|HEADLESS|ATrim|ETrim
+
 ### Sub_protocol LS - *3*
 Models: LS114, 124, 215
 
-CH1|CH2|CH3|CH4|CH5|CH6|CH7|CH8|CH9
----|---|---|---|---|---|---|---|---
-A|E|T|R|FLIP|INVERT|PICTURE|VIDEO|HEADLESS
+CH1|CH2|CH3|CH4|CH5|CH6|CH7|CH8|CH9|CH10|CH11
+---|---|---|---|---|---|---|---|---|---|---
+A|E|T|R|FLIP|INVERT|PICTURE|VIDEO|HEADLESS|ATrim|ETrim
 
 ### Sub_protocol FY805 - *4*
 Model: FY805
 
 **Only 1 ID available**
 
-CH1|CH2|CH3|CH4|CH5|CH6|CH7|CH8|CH9
----|---|---|---|---|---|---|---|---
-A|E|T|R|FLIP||||HEADLESS
+CH1|CH2|CH3|CH4|CH5|CH6|CH7|CH8|CH9|CH10|CH11
+---|---|---|---|---|---|---|---|---|---|---
+A|E|T|R|FLIP||||HEADLESS|ATrim|ETrim
 
 ### Sub_protocol A180 - *5*
 Model: XK A180, A120, F949S, F959
 
 A180:
-CH1|CH2|CH3|CH4|CH5|CH6
----|---|---|---|---|---
-A|E|T|R|3D6G|RATE
+CH1|CH2|CH3|CH4|CH5|CH6|CH7|CH8|CH9|CH10|CH11
+---|---|---|---|---|---|---|---|---|---|---
+A|E|T|R|3D6G|RATE||||ATrim|ETrim
 
 A120:
-CH1|CH2|CH3|CH4|CH5|CH6
----|---|---|---|---|---
-A|E|T|R|RATE|LED
+CH1|CH2|CH3|CH4|CH5|CH6|CH7|CH8|CH9|CH10|CH11
+---|---|---|---|---|---|---|---|---|---|---
+A|E|T|R|RATE|LED||||ATrim|ETrim
 
 F949S:
-CH1|CH2|CH3|CH4|CH5|CH6|CH7
----|---|---|---|---|---|---
-A|E|T|R|RATE|RXLED|3D6G
+CH1|CH2|CH3|CH4|CH5|CH6|CH7|CH8|CH9|CH10|CH11
+---|---|---|---|---|---|---|---|---|---|---
+A|E|T|R|RATE|RXLED|3D6G|||ATrim|ETrim
 
 ### Sub_protocol DRAGON - *6*
 Model: Eachine Mini Wing Dragon, Eachine Mini Cessna
 
 Telemetry is supported: A1 = battery voltage with a Ratio of 25.5, A2=battery low flag (0=off,>0=on) and RSSI = dummy value of 100
 
-CH1|CH2|CH3|CH4|CH5|CH6
----|---|---|---|---|---
-A|E|T|R|MODE|RTH
+CH1|CH2|CH3|CH4|CH5|CH6|CH7|CH8|CH9|CH10|CH11
+---|---|---|---|---|---|---|---|---|---|---
+A|E|T|R|MODE|RTH||||ATrim|ETrim
 
 MODE: -100%=Beginner, 0%=Intermediate, +100%=Advanced
 
 ### Sub_protocol F949G - *7*
+If a CC2500 is installed it will be used for this sub protocol. Option in this case is used for fine frequency tuning like any CC2500 protocols so check the [Frequency Tuning page](/docs/Frequency_Tuning.md).
+
+If only a NRF24L01 is installed then this sub protocol might be problematic because it is using the xn297L emulation with a transmission speed of 250kbps which doesn't work very well with every NRF24L01, this is an hardware issue with the authenticity and accuracy of the components.
+
 Model: F949G
 
-CH1|CH2|CH3|CH4|CH5|CH6
----|---|---|---|---|---
-A|E|T|R|6G3D|Light
+CH1|CH2|CH3|CH4|CH5|CH6|CH7|CH8|CH9|CH10|CH11
+---|---|---|---|---|---|---|---|---|---|---
+A|E|T|R|6G3D|Light||||ATrim|ETrim
 
 Model: KFPLAN Z-Series like Z61 BF109, Z54 A380,...
 
-CH1|CH2|CH3|CH4|CH5|CH6|CH7|CH8|CH9
----|---|---|---|---|---|---|---|---
-A|E|T|R|-|Rate|Light|Unk1|Unk2
+CH1|CH2|CH3|CH4|CH5|CH6|CH7|CH8|CH9|CH10|CH11
+---|---|---|---|---|---|---|---|---|---|---
+A|E|T|R||Rate|Light|Unk1|Unk2|ATrim|ETrim
 
 Unk1&2: long press right/left
 
@@ -1269,20 +1306,18 @@ Unk1&2: long press right/left
 ### Sub_protocol PA18 - *0*
 Model: PA18 mini
 
-CH1|CH2|CH3|CH4|CH5|CH6|CH7
----|---|---|---|---|---|---
-A|E|T|R|MODE|FLIP|RTH
+CH1|CH2|CH3|CH4|CH5|CH6|CH7|CH8|CH9|CH10|CH11
+---|---|---|---|---|---|---|---|---|---|---
+A|E|T|R|MODE|FLIP|RTH|||ATrim|ETrim
 
 MODE: -100% beginner, 0% intermediate, +100% Expert
 
 ### Sub_protocol SU35 - *1*
 Model: QF009 SU35
 
-CH6 - LED, CH7 - LED Flash, CH8 - Invert, CH9 - Rate
-
-CH1|CH2|CH3|CH4|CH5|CH6|CH7|CH8|CH9
----|---|---|---|---|---|---|---|---
-A|E|T|R|MODE|LED|LED_FLASH|INVERT|RATE
+CH1|CH2|CH3|CH4|CH5|CH6|CH7|CH8|CH9|CH10|CH11
+---|---|---|---|---|---|---|---|---|---|---
+A|E|T|R|MODE|LED|LED_FLASH|INVERT|RATE|ATrim|ETrim
 
 MODE: -100% 6G, +100% 3D
 
@@ -1544,8 +1579,12 @@ A|E|T|R|Rate|Mode|Hover|Light
 
 The plane does not need to be bound each time if it is powered on **after** the radio/protocol is on.
 
+Telemetry is supported. The plane sends a battery status of good->empty which is visible in A1 (good=8.4V->empty=7.1V) and RSSI gets a dummy value of 100.
+
 The rudder trim is driven from the rudder channel to increase the range (Original TX rudder has no range once the motor has been turned on...).
 
+Mode: -100%=6G, 0%=3D, +100%=Gyro off (Senior mode)
+
 ### Sub_protocol X4 - *0*
 Transmitter: XK X4-A160, X5S, model: XK A160S, XK A280, XK A300
 
@@ -1799,18 +1838,22 @@ FMODE and AUX7 have 4 positions: -100%..-50%=>0, -50%..5%=>1, 5%..50%=>2, 50%..1
 ## FX - *58*
 FEI XIONG
 
-CH1|CH2|CH3|CH4
----|---|---|---
-A|-|T|-
-
 ### Sub_protocol 816 - *0*
 Model: FX816 P38, B17
 
 Only 8 TX IDs available
 
+CH1|CH2|CH3|CH4
+---|---|---|---
+A|-|T|-
+
 ### Sub_protocol 620 - *1*
 Model: FX620 SU35
 
+CH1|CH2|CH3|CH4
+---|---|---|---
+A|-|T|-
+
 ### Sub_protocol 9630 - *2*
 Model: FX9630, FX9603, QIDI-550
 
@@ -1833,6 +1876,19 @@ FLIP is a toggle channel meaning that -100% to +100% is a command and +100% to -
 
 Gyro: -100%=6G, 0%=3D+Gyro, +100%=3D
 
+### Sub_protocol QF012 - *4*
+Model: QF012 SBD Dauntless
+
+Telemetry supported. The plane sends a battery status of good->empty which is visible in A1 (good=4.2V->empty=3.1V) and RSSI gets a dummy value of 100.
+
+CH1|CH2|CH3|CH4|CH5|CH6|CH7|CH8
+---|---|---|---|---|---|---|---
+A|E|T|R|FLIP|GYRO|Invert|Reset
+
+Gyro: -100%=6G, 0%=3D+Gyro, +100%=3D
+
+Reset: Restore fine tunning midpoint
+
 ## FY326 - *20*
 
 ### Sub_protocol FY326 - *0*
@@ -2040,6 +2096,9 @@ CH16| CH8 | -100% | 0% | - | - | -
 ## MouldKg - *90*
 Mould King 2.4GHz TX: Technic Brick models
 
+### Sub_protocol A4444 - *0*
+Model: 4 analog ports brick
+
 Up to 4 bricks can be controlled at the same time.
 
 Option field | Value
@@ -2055,17 +2114,52 @@ To associate a brick to a RX number (RX_num above), set this RX number under the
 Example: I want to control 2 bricks. I select RX number 1, set option to 1 and launch a bind on the first brick. I select RX number 2, set option to 1 and launch a bind on the second brick. Now to control both bricks I set RX number to 1 and option to 2. Therefore brick1 will react to channels CH1 to CH4 and brick2 to channel CH5 to CH8.
 On another model I can control 4 other bricks, bind each brick to RX number 3 to 6 and then finaly set RX number to 3 and option to 4 to contol the 4 bricks with CH1 to CH16.
 
-### Sub_protocol Analog - *0*
+CH1|CH2|CH3|CH4|CH5|CH6|CH7|CH8|CH9|CH10|CH11|CH12|CH13|CH14|CH15|CH16
+---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---
+Brick1_A|Brick1_B|Brick1_C|Brick1_D|Brick2_A|Brick2_B|Brick2_C|Brick2_D|Brick3_A|Brick3_B|Brick3_C|Brick3_D|Brick4_A|Brick4_B|Brick4_C|Brick4_D
+
+### Sub_protocol D4444 - *1*
+Model: 4 digital ports brick and Integrated power module
+
+Up to 4 bricks can be controlled at the same time.
+
+Option field | Value
+-------------|------
+0|The module will act like the original radio which will bind every time and attach to the first brick in bind mode
+1|The module will control the brick number RX_num
+2|The module will control the brick number RX_num and RX_num+1
+3|The module will control the brick number RX_num, RX_num+1 and RX_num+2
+4|The module will control the brick number RX_num, RX_num+1, RX_num+2 and RX_num+3
+
+To associate a brick to a RX number (RX_num above), set this RX number under the protocol, set option to 1, launch a bind and power on the brick you want to control. Repeat this for every brick using a different RX number each time and then indicate the number of bricks to be controlled using the Option field.
+
+Example: I want to control 2 bricks. I select RX number 1, set option to 1 and launch a bind on the first brick. I select RX number 2, set option to 1 and launch a bind on the second brick. Now to control both bricks I set RX number to 1 and option to 2. Therefore brick1 will react to channels CH1 to CH4 and brick2 to channel CH5 to CH8.
+On another model I can control 4 other bricks, bind each brick to RX number 3 to 6 and then finaly set RX number to 3 and option to 4 to contol the 4 bricks with CH1 to CH16.
 
 CH1|CH2|CH3|CH4|CH5|CH6|CH7|CH8|CH9|CH10|CH11|CH12|CH13|CH14|CH15|CH16
 ---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---
 Brick1_A|Brick1_B|Brick1_C|Brick1_D|Brick2_A|Brick2_B|Brick2_C|Brick2_D|Brick3_A|Brick3_B|Brick3_C|Brick3_D|Brick4_A|Brick4_B|Brick4_C|Brick4_D
 
-### Sub_protocol Digit - *1*
+### Sub_protocol A664 - *2*
+Model: 4/6 analog ports brick
+
+Up to 3 bricks can be controlled at the same time. The bricks can be either 4 or 6 ports but only the 2 first bricks will be sent 6 channels, the last brick will only be sent 4 channels.
+
+Option field | Value
+-------------|------
+0|The module will act like the original radio which will bind every time and attach to the first brick in bind mode
+1|The module will control the brick number RX_num
+2|The module will control the brick number RX_num and RX_num+1
+3|The module will control the brick number RX_num, RX_num+1 and RX_num+2
+
+To associate a brick to a RX number (RX_num above), set this RX number under the protocol, set option to 1, launch a bind and power on the brick you want to control. Repeat this for every brick using a different RX number each time and then indicate the number of bricks to be controlled using the Option field.
+
+Example: I want to control 2 bricks. I select RX number 1, set option to 1 and launch a bind on the first brick. I select RX number 2, set option to 1 and launch a bind on the second brick. Now to control both bricks I set RX number to 1 and option to 2. Therefore brick1 will react to channels CH1 to CH4 and brick2 to channel CH5 to CH8.
+On another model I can control 3 other bricks, bind each brick to RX number 3 to 5 and then finaly set RX number to 3 and option to 3 to contol the 4 bricks with CH1 to CH16.
 
 CH1|CH2|CH3|CH4|CH5|CH6|CH7|CH8|CH9|CH10|CH11|CH12|CH13|CH14|CH15|CH16
 ---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---
-Brick1_A|Brick1_B|Brick1_C|Brick1_D|Brick2_A|Brick2_B|Brick2_C|Brick2_D|Brick3_A|Brick3_B|Brick3_C|Brick3_D|Brick4_A|Brick4_B|Brick4_C|Brick4_D
+Brick1_A|Brick1_B|Brick1_C|Brick1_D|Brick1_E|Brick1_F|Brick2_A|Brick2_B|Brick2_C|Brick2_D|Brick2_E|Brick2_F|Brick3_A|Brick3_B|Brick3_C|Brick3_D
 
 ## NCC1701 - *44*
 Model: Air Hogs Star Trek USS Enterprise NCC-1701-A
@@ -2144,6 +2238,8 @@ CH1|CH2|CH3|CH4|CH5|CH6|CH7|CH8|CH9|CH10|CH11|CH12
 ---|---|---|---|---|---|---|---|---|---|---|---
 A|E|T|R|MODE|FLIP|LIGHT|PHOTO|VIDEO|TRIMRESET|BAL|BALHIG
 
+Telemetry is supported. The plane sends a battery status of good->empty which is visible in A1 (good=13.2V->empty=0V) and RSSI gets a dummy value of 100.
+
 ### Sub_protocol F22
 Model: SG F22