Protocols_Details.md

@@ -520,18 +520,18 @@ Here is a table detailling the different RX output ranges based on the radio set
 ![Image](/docs/images/DSM_RX_Output.JPG)
 
 ### Sub_protocol DSM2_1F - *0*
-Air DSM2, Resolution 1024, servo refresh rate can only be 22ms
+DSM2, Resolution 1024, servo refresh rate can only be 22ms
 ### Sub_protocol DSM2_2F - *1*
-Air DSM2, Resolution 2048, servo refresh rate can be 22 or 11ms. 11ms won't be available on all servo outputs when more than 7 channels are used.
+DSM2, Resolution 2048, servo refresh rate can be 22 or 11ms. 11ms won't be available on all servo outputs when more than 7 channels are used.
 ### Sub_protocol DSMX_1F - *2*
-Air DSMX, Resolution 2048, servo refresh rate can only be 22ms
+DSMX, Resolution 2048, servo refresh rate can only be 22ms
 ### Sub_protocol DSMX_2F - *3*
-Air DSMX, Resolution 2048, servo refresh rate can be 22 or 11ms. 11ms won't be available on all servo outputs when more than 7 channels are used.
+DSMX, Resolution 2048, servo refresh rate can be 22 or 11ms. 11ms won't be available on all servo outputs when more than 7 channels are used.
 ### Sub_protocol AUTO - *4*
-"AUTO" is recommended to automatically select the best settings for your air DSM2 and DSMX RXs.
+"AUTO" is recommended to automatically select the best settings for your DSM2 and DSMX RXs.
 
 ### Sub_protocol DSMR_1F - *5*
-Surface DSMR receivers
+DSMR receivers
 
 **Only 22 IDs available**, use RX num to cycle through them.
 
@@ -615,7 +615,7 @@ Calib is the same as the original radio with both sticks down and to the left in
 Models: Eachine E129/E130 and Twister Ninja 250
 
 ### Sub_protocol C186 - *1*
-Models: C186/E120, C127/E110, K127, C159
+Models: C186/E120, C127/E110, K127
 
 The FC of the heli seems to store the trims Trim A/E/R=CH7..9. If you use these trims, make sure to center them after powering off the heli or they will be added to the previous trims and over correct.