Update Multiprotocol.h

Lua_scripts/MultiChan.txt

@@ -157,7 +157,7 @@
 74,1,RadioLink,Air,0,CH5,CH6,CH7,CH8,FS_CH1,FS_CH2,FS_CH3,FS_CH4,FS_CH5,FS_CH6,FS_CH7,FS_CH8
 74,2,RadioLink,DumboRC,0,CH5,CH6,CH7,CH8,FS_CH1,FS_CH2,FS_CH3,FS_CH4,FS_CH5,FS_CH6,FS_CH7,FS_CH8
 74,3,RadioLink,RC4G,0,CH5,FS_CH1,FS_CH2,FS_CH3,FS_CH4
-76,0,Realacc,R11,1,Flip,Light,Calib,HLess,RTH,UNK
+76,0,Realacc,Std,1,Flip,Light,Calib,HLess,RTH,UNK
 50,0,Redpine,Fast,0,sCH5,sCH6,sCH7,sCH8,sCH9,sCH10,sCH11,sCH12,sCH13,sCH14,sCH15,sCH16
 50,1,Redpine,Slow,0,sCH5,sCH6,sCH7,sCH8,sCH9,sCH10,sCH11,sCH12,sCH13,sCH14,sCH15,sCH16
 21,0,Futaba,SFHSS,0,CH5,CH6,CH7,CH8

Multiprotocol/Multi.txt

@@ -73,7 +73,7 @@
 73,Kyosho,FHSS,Hype
 74,RadioLink,Surface,Air,DumboRC,RC4G
 75,---
-76,Realacc,R11
+76,Realacc
 77,OMP
 78,M-Link
 79,WFLY,RF20x

Multiprotocol/Multi_Protos.ino

@@ -169,7 +169,6 @@ const char STR_SUBTYPE_HOTT[] =       "\x07""Sync\0  ""No_Sync";
 const char STR_SUBTYPE_PELIKAN[] =    "\x05""Pro\0 ""Lite\0""SCX24";
 const char STR_SUBTYPE_V761[] =       "\x05""3ch\0 ""4ch\0 ""TOPRC";
 const char STR_SUBTYPE_RLINK[] =      "\x07""Surface""Air\0   ""DumboRC""RC4G\0  ";
-const char STR_SUBTYPE_REALACC[] =    "\x03""R11";
 const char STR_SUBTYPE_KYOSHO[] =     "\x04""FHSS""Hype";
 const char STR_SUBTYPE_KYOSHO2[] =    "\x05""KT-17";
 const char STR_SUBTYPE_FUTABA[] =     "\x05""SFHSS";
@@ -437,7 +436,7 @@ const mm_protocol_definition multi_protocols[] = {
 		{PROTO_RLINK,      STR_RLINK,     STR_SUBTYPE_RLINK,     4, OPTION_RFTUNE,  0, 0, SW_CC2500, RLINK_init,      RLINK_callback      },
 	#endif
 	#if defined(REALACC_NRF24L01_INO)
-		{PROTO_REALACC,    STR_REALACC,   STR_SUBTYPE_REALACC,   1, OPTION_NONE,    0, 0, SW_NRF,    REALACC_init,    REALACC_callback    },
+		{PROTO_REALACC,    STR_REALACC,   NO_SUBTYPE,            0, OPTION_NONE,    0, 0, SW_NRF,    REALACC_init,    REALACC_callback    },
 	#endif
 	#if defined(REDPINE_CC2500_INO)
 		{PROTO_REDPINE,    STR_REDPINE,   STR_SUBTYPE_REDPINE,   2, OPTION_RFTUNE,  0, 0, SW_CC2500, REDPINE_init,    REDPINE_callback    },

Multiprotocol/Multiprotocol.h

@@ -19,7 +19,7 @@
 #define VERSION_MAJOR		1
 #define VERSION_MINOR		3
 #define VERSION_REVISION	4
-#define VERSION_PATCH_LEVEL	00
+#define VERSION_PATCH_LEVEL	0
 
 #define MODE_SERIAL 0
 

Protocols_Details.md

@@ -368,8 +368,6 @@ TX: Axial AX-4 2.4GHz transmitter, HPI TF-41 and Panda Hobby 3CH Smart Radio 2.4
 
 Models: Axial SCX24: Deadbolt, Jeep Wranger Rubicon, Chevrolet 1967 C10, B-17 Betty, HPI RF-50 and Panda Hobby: Tetra K1, X1, X2
 
-**Only 4 frequency hopping tables**
-
 Extended limits supported
 
 CH1|CH2|CH3
@@ -622,7 +620,7 @@ Calib is the same as the original radio with both sticks down and to the left in
 Models: Eachine E129/E130 and Twister Ninja 250
 
 ### Sub_protocol C186 - *1*
-Models: C186/E120, C127/E110, K127, C159, C189, C129v2
+Models: RC ERA C186/E120, C127/E110, K127, C159, C189, C129v2
 
 The FC of the heli seems to store the trims Trim A/E/R=CH7..9. If you use these trims, make sure to center them after powering off the heli or they will be added to the previous trims and over correct.
 
@@ -1951,14 +1949,10 @@ A|E|T|R|FLIP|LED|PICTURE|VIDEO|HEADLESS|RTH|XCAL|YCAL
 Model: JXD 509 is using Q282 with CH12=Start/Stop motors
 
 ## Realacc - *76*
-Model: Realacc R11
-
-Untested protocol, let me know if it works.
+Model: Realacc R11, Eachine E017
 
 Autobind protocol
 
-### Sub_protocol R11 - *0*
-
 CH1|CH2|CH3|CH4|CH5|CH6|CH7|CH8|CH9|CH10
 ---|---|---|---|---|---|---|---|---|----
 A|E|T|R|FLIP|LIGHT|CALIB|HLESS|RTH|UNK