Compatible model: PROPEL 74-Z Speeder Bike
Protcol: PROPEL (66)
Sub protocol: none
Autobind protocol
Extended limits not supported
Telemetry supported
14 channels in use due to many features
Still work in progress
Subprotocols: X450 and X420 -> not sure if they are subprotocols or just different IDs...
CH5: M-Mode=-100%, 6G-Mode=0%, V-Mode=+100%
CH6: Take off momentary switch
CH7: Emergency stop momentary switch
CH8: 3D/6G momentary switch
CH9: Photo momentary switch
* Add skeleton for AFHDS2A receiver protocol
* Bind & data Ok
* Send channels to TX via telemetry
* Add RSSI
* Fix AVR compilation
* Fix channel number
Protocol number: 63
Sub protocols: 0=250Kb, 1=1Mb, 2=2Mb
Option: -1=scan RF channels, 0-84=RF channel
DEBUG_SERIAL must be enabled
If a valid frame is received the frame will be sent on the serial port.
New protocol E01X number 45
Sub protocol E012 number 0
Sub protocol E015 number 1
Channels:
ARM_SW CH5
FLIP_SW CH6
LED_SW CH7
HEADLESS_SW CH8
RTH_SW CH9
Models: MJX Bugs 3 Mini and 3H
Protocol BUGSMINI = 42
No sub_protocol
Telemetry = RX RSSI and battery voltage good/warning/bad
RX_Num is used to give a number to a given model. You must use a different RX_Num per MJX Bugs Mini. A maximum of 16 Bugs Mini are supported.
Channels:
ARM CH5
ANGLE CH6
FLIP CH7
PICTURE CH8
VIDEO CH9
LED CH10
SLT (11) sub_protocols are now
- V1 (0): original 6 channels
- V2 (1): 6 channels, might be able to add channel 7 and 8 but need testing
- Q200 (2): 5 channels + switches: CH9=FMODE, CH10=FLIP, CH11=VIDON, CH12=VIDOFF
OPT_FW (0) : OPTIMA + forward telemetry packets to TX to be decoded
OPT_HUB (1) : OPTIMA + basic telemetry using FrSky Hub format
MINIMA (2) : Minima/Micro/RED
Hitec protocol using the CC2500 RF component
Protocol number: 39
Sub protocols:
- Optima (0): the TX must be really close to the RX for the bind negociation to complete.
- Minima (1): untested
Optima supports basic telemetry using the FrSky Hub format: RX volt, TX RSSI,&LQI
