Michael
0616cab386
Fixes a problem where setting failsafe values was only possible once after bind and only set values for the first 12 channels. This fix allows setting failsafe values without having to rebind and sets failsafe values correctly for all possible 16 channels. ( #695 )
...
Notes for OpenTX/EdgeTX:
This fix doesn't exhibit servo jitter if failsafe mode was left on Custom, however it is still recommended to set failsafe mode back to Receiver after setting failsafe values.
It is still necessary to wait at least 8 seconds switching back from failsafe mode Custom to failsafe mode Receiver as OpenTX/EdgeTX will trigger the data transfer in Custom mode only every 7 seconds.
Bench tested with HoTT receivers GR-16, GR-24pro, GR-32
Flight tested with HoTT receiver GR-24
2022-06-13 14:28:21 +02:00
Michael
da33df4346
added packet_in[14] to transfer HoTT device warnings to OpenTx ( #627 )
2021-11-04 14:57:25 +01:00
Pascal Langer
802e69563e
...
2021-05-04 10:53:38 +02:00
Pascal Langer
dbc33951a4
Fix for module boot issue?
2021-03-13 18:18:07 +01:00
Pascal Langer
732e66cab2
HoTT: fix Text config in Sync mode
2021-03-13 11:01:51 +01:00
Pascal Langer
3b8b2ef376
Protocol init function modified
2021-02-09 18:23:33 +01:00
Pascal Langer
7676398aab
Fix OMP protocol
2021-01-25 11:33:30 +01:00
Ben Lye
9b2318cc7e
Fix EEPROM address variable types ( #494 )
2020-12-27 09:57:41 +01:00
Pascal Langer
37a06c050d
HoTT: added support for 16 channels (previously 12)
2020-12-13 22:56:47 +01:00
Pascal Langer
84132678cc
FrSkyR9: TQLY = percentage of telemetry frames per second
2020-07-04 18:40:29 +02:00
Pascal Langer
0316c9eea9
HoTT: telem code cleanup
2020-06-05 22:44:32 +02:00
Pascal Langer
3705415927
HoTT: fix telemetry
2020-06-05 22:20:19 +02:00
Pascal Langer
aeb8d67219
HoTT: add subprotocols
2020-06-01 22:55:32 +02:00
Pascal Langer
1f65025036
HoTT: add LBT and telemetry improvment
2020-05-31 23:54:13 +02:00
Pascal Langer
c46b49ccf1
HoTT: cleanup
2020-05-23 22:41:07 +02:00
Pascal Langer
4290c75478
HoTT: support for auto sensors discovery and sensors text config
2020-05-17 15:47:56 +02:00
pascallanger
db442d81dd
Fix all compilation issues (?)
2019-11-11 19:15:39 +01:00
pascallanger
0afed7d3a4
Fix HoTT menu for internal module
2019-11-11 15:36:39 +01:00
pascallanger
0e40f64c6b
Enable HoTT RX config menu
...
Use OpenTX lua script
2019-11-10 18:55:03 +01:00
pascallanger
1621263fb0
HoTT telem doc update
2019-11-09 12:10:56 +01:00
pascallanger
b07b081a15
HoTT telemetry size change
2019-11-07 11:13:48 +01:00
pascallanger
928641f535
HoTT: add progmem to tables
2019-11-07 01:56:13 +01:00
pascallanger
c4c5ffec4f
HoTT: Failsafe
...
Failsafe MUST be configured once with the desired channel values (hold or position) while the RX is up (wait 10+sec for the RX to learn the config) and then failsafe MUST be set to RX/Receiver otherwise the servos will jitter!!!
2019-11-07 01:03:57 +01:00
pascallanger
00f0719659
HoTT: more hop tables
2019-11-05 19:11:28 +01:00
pascallanger
0482627512
HoTT telem
2019-11-05 00:31:20 +01:00
pascallanger
5856442e0f
First HoTT version
2019-11-04 19:16:19 +01:00
pascallanger
7b281e47d6
HoTT work in progress
2019-11-04 09:26:12 +01:00
