pascallanger
0b19fa0bdf
Disable channel mapping + telemetry inversion
2019-10-08 18:52:47 +02:00
pascallanger
ff96146b04
Enhanced serial protocol
...
Protocol 0..255
RX_Num 0..63
Disable channel mapping -> not implemented yet
Disable telemetry
Data 0-9 bytes
2019-10-07 19:06:00 +02:00
pascallanger
431808286b
Data Buffer signaling
2019-10-03 16:38:50 +02:00
pascallanger
bf61295b76
Fix AFHDS2A_RX
2019-10-02 21:24:50 +02:00
pascallanger
49a1ecea00
Merge branch 'master' into SPort_Send
2019-10-02 21:07:08 +02:00
pascallanger
11f0e55bb1
SPort_Send sequencer
2019-10-02 20:09:18 +02:00
goebish
f3d2ab61e4
Protocol Flysky AFHDS2A receiver ( #275 )
...
* Add skeleton for AFHDS2A receiver protocol
* Bind & data Ok
* Send channels to TX via telemetry
* Add RSSI
* Fix AVR compilation
* Fix channel number
2019-10-01 20:44:26 +02:00
pascallanger
c2404d4f0d
Code cleanup
2019-09-30 20:53:10 +02:00
pascallanger
821732bba9
Initial S.Port send
...
!!! No retransmit for now !!!
2019-09-30 17:35:12 +02:00
goebish
2be2dce584
Protocol FrSky D16 receiver ( #266 )
...
* Add skeleton for FrSkyX receiver protocol
* Binds & receives data packets
* Store bind information
* Fix compilation
* Bypass LNA since intended usage implies tx & rx are close together
* Bind channel has FS_AUTOCAL
* Add freq fine tune & low power mode (disable lna)
* Add TX ID check
* Retry longer until first packet is catched
* Fix chanskip for first packet
* Fix defines
* Fix bind
* Send channels to TX
* Fix RSSI reading
* Add missing static keyword
* Fix Validate.h
* Fix compilation
2019-09-17 23:35:19 +02:00
Pascal Langer
078dc2ab17
AFHDS2A telemetry AA and AC
2019-09-14 16:34:19 +02:00
Pascal Langer
6f4522caa6
Revert "AFHDS2A telemetry AA and AC"
...
This reverts commit 3c76ce9f39c3d4e48a2a7d9482fc152533a189aa.
2019-09-14 16:31:27 +02:00
Pascal Langer
3c76ce9f39
AFHDS2A telemetry AA and AC
2019-09-14 16:27:07 +02:00
Pascal Langer
7d327c1622
Scanner 2.4GHz
...
Thanks to Goebish for this spectrum analyzer.
It will work soon with the OpenTX 2.3 Spectrum Analyser tool.
2019-09-10 23:37:54 +02:00
Pascal Langer
ea96c328fc
Protocol NCC1701
...
CH5: Warp
Telemetry:
A1 voltage is used for crash detection. In case of a crash A1=0V. You can be assign a sound to the crash.
2018-11-03 17:24:47 +01:00
Pascal Langer
10788976b6
New protocol BUGSMINI
...
Models: MJX Bugs 3 Mini and 3H
Protocol BUGSMINI = 42
No sub_protocol
Telemetry = RX RSSI and battery voltage good/warning/bad
RX_Num is used to give a number to a given model. You must use a different RX_Num per MJX Bugs Mini. A maximum of 16 Bugs Mini are supported.
Channels:
ARM CH5
ANGLE CH6
FLIP CH7
PICTURE CH8
VIDEO CH9
LED CH10
2018-10-17 13:23:27 +02:00
Pascal Langer
e7449897f9
BUGS new protocol
...
BUGS new protocol (number 41)
Models: Bugs 3, 6 and 8
Autobind protocol
Telemetry: TX & RX RSSI, Battery voltage good/bad
ARM CH5
LED CH6
FLIP CH7
PICTURE CH8
VIDEO CH9
2018-08-28 16:13:28 +02:00
Pascal Langer
f105d7c7eb
Hitec full telemetry
2018-08-08 00:30:19 +02:00
Pascal Langer
9b30a3d72a
FrSky X: SPORT polling
...
Mike's corrections to make SPORT working on Taranis.
2018-08-04 23:47:15 +02:00
Pascal Langer
d9f343e20b
Hitec: new protocol
...
Hitec protocol using the CC2500 RF component
Protocol number: 39
Sub protocols:
- Optima (0): the TX must be really close to the RX for the bind negociation to complete.
- Minima (1): untested
Optima supports basic telemetry using the FrSky Hub format: RX volt, TX RSSI,&LQI
2018-08-03 18:29:24 +02:00
Pascal Langer
ab27ee50b0
Introduction of Banks for the switch protocol selection
2018-01-30 12:02:45 +01:00
Pascal Langer
70db505dd9
New Corona protocol and autobind bug fix
2018-01-03 13:04:58 +01:00
Pascal Langer
bef562964d
Revert "Merge branch 'Pascal' into master"
...
This reverts commit fc5495b6d1d68177634fcd92932ba44b8e47d91e, reversing
changes made to f3838ae4b0512f0970f6bafa0d5a9e493ffc0c40.
2017-12-30 05:32:43 +01:00
midelic
fc5495b6d1
Merge branch 'Pascal' into master
2017-12-24 20:24:59 +01:00
Arne Schwabe
1bc2dd2964
Fix multi status ( #132 )
2017-12-18 16:45:09 +01:00
Arne Schwabe
64fb90960b
Fix Sport polling bytes send without multi header and introduce sport polling header for multi ( #126 )
2017-12-16 09:14:59 +01:00
Pascal Langer
8b5bb0d358
Fix compilation errors based on config def
2017-12-10 15:41:50 +01:00
Pascal Langer
6031f1e3b8
FrSkyX failsafe
2017-12-10 11:04:03 +01:00
Pascal Langer
0d43614ac3
Failsafe
2017-12-07 17:38:06 +01:00
Pascal Langer
19f879da7f
Failsafe
2017-12-07 17:28:01 +01:00
Pascal Langer
fd4346cb64
Changed throttle failsafe value format
2017-12-07 17:02:35 +01:00
Pascal Langer
4418cab3a5
Failsafe: default for PPM and set on radio for Serial
2017-12-07 16:02:18 +01:00
Pascal Langer
ebd44d9628
Sport polling fix
2017-12-02 11:54:15 +01:00
Pascal Langer
7debad6c67
SPORT polling
2017-12-01 17:55:24 +01:00
Pascal Langer
a3c2628359
Replaced debug serial routines
2017-11-26 20:38:30 +01:00
Pascal Langer
2181d0b33c
Final bit bashing fix?
2017-11-26 08:41:55 +01:00
Pascal Langer
41d579dc23
Invert serial atmega bug correction
2017-11-25 09:32:00 +01:00
Pascal Langer
7d41017850
Updates
...
Implemented debug output on uart1 for stm32
Replaced hardcoded eeprom offsets with documented constats
Fixed a bug affecting telemetry on Atmega328p using the invert_telemetry flag.
2017-11-24 23:01:47 +01:00
Pascal Langer
9e8978166e
New CABELL protocol
...
Protocol number: 34
sub_protocols:
0 CABELL_V3
1 CABELL_V3_TELEMETRY
6 CABELL_SET_FAIL_SAFE
7 CABELL_UNBIND
2017-11-23 18:44:31 +01:00
Pascal Langer
8ea70a1b77
Tons of updates
2017-11-20 16:01:12 +01:00
midelic
5f7c598a34
fix compile error for avr module when commented FrSkyX protocol
2017-11-06 17:45:14 +01:00
midelic
d451af365a
Fix telemetry FrSkyX protocol
2017-11-04 17:14:29 +01:00
midelic
2753f6c4e5
added Mike Blandord modifications
...
- used bootloader to flash multi-module with TX
-updated FrslyX protocol telemetry sequence
2017-07-28 23:39:51 +03:00
pascallanger
55bc6f9a00
FrSkyX telemetry RSSI and LQi
2017-02-24 13:27:19 +01:00
pascallanger
997d31addd
FrSkyX add telemetry TX_RSSI, RX_LQI, TX_LQI
2017-02-24 11:48:25 +01:00
pascallanger
0c5fae01b5
WAIT_FOR_BIND feature
...
This feature will not activate the selected protocol unless a bind is
requested using bind from channel or the GUI "Bind" button. It is only
enabled if bind from channel and autobind are set since I think they are
working well together.
The goal is to prevent binding other people's model when powering up the
TX, changing model or scanning through protocols.
There is a new blinking pattern associated to it as well as a new status
"Waiting for bind".
This feature is enabled by default in _config.h .
2017-02-10 17:38:07 +01:00
pascallanger
219beb4a0e
Fix Multi_status bind flag when invalid protocol selected
2017-02-08 22:42:39 +01:00
pascallanger
0a7cd3d6e9
Reset invert serial when switching protocol
2017-02-06 15:50:43 +01:00
pascallanger
3516e5ae8a
FrSkyD telemetry fix
2017-02-04 10:11:25 +01:00
pascallanger
04bbe3187f
FrSky telemetry
2017-02-03 22:02:35 +01:00
