pascallanger
59af0594dc
DM002: correct channels
2017-03-22 16:17:12 +01:00
pascallanger
8cf6d4f7d8
add DM002
2017-03-22 14:58:59 +01:00
pascallanger
995bb921c1
DM002 protocol
...
protocol number 33
sub_protocol none=0
ch5=flip
ch6=led
ch7=headless
2017-03-22 14:55:55 +01:00
pascallanger
d7076f5295
PPM: add MIN_PPM_CHANNELS and MAX_PPM_CHANNELS
2017-02-28 10:36:35 +01:00
pascallanger
29a5397491
SLT: revert to previous version
2017-02-28 10:33:43 +01:00
pascallanger
a3927218a6
Futaba middle value 1520
2017-02-24 20:22:28 +01:00
pascallanger
a19a14665f
GW008 Autobind protocol
2017-02-24 13:41:32 +01:00
pascallanger
55bc6f9a00
FrSkyX telemetry RSSI and LQi
2017-02-24 13:27:19 +01:00
pascallanger
997d31addd
FrSkyX add telemetry TX_RSSI, RX_LQI, TX_LQI
2017-02-24 11:48:25 +01:00
pascallanger
548390b0d7
GW008 protocol addition
...
Protocol number: 32
No sub_protocol
2017-02-24 11:00:10 +01:00
pascallanger
846e09c7cb
Disable low power by default
2017-02-23 11:23:25 +01:00
pascallanger
2ba3552578
AFHDS2A: prevent TX inbound swamping during bind
2017-02-23 10:07:09 +01:00
pascallanger
943bb6d15b
SFHSS reverse channels direction
2017-02-23 09:15:12 +01:00
pascallanger
14ca63571d
Fix OrangeTX compilation
2017-02-21 14:20:25 +01:00
pascallanger
d9fb856eb8
Fix Multi OrangeTX build
2017-02-21 00:29:48 +01:00
pascallanger
9ee0311ea9
FrSkyD compilation issue without telemetry
2017-02-11 11:40:40 +01:00
pascallanger
0c5fae01b5
WAIT_FOR_BIND feature
...
This feature will not activate the selected protocol unless a bind is
requested using bind from channel or the GUI "Bind" button. It is only
enabled if bind from channel and autobind are set since I think they are
working well together.
The goal is to prevent binding other people's model when powering up the
TX, changing model or scanning through protocols.
There is a new blinking pattern associated to it as well as a new status
"Waiting for bind".
This feature is enabled by default in _config.h .
2017-02-10 17:38:07 +01:00
pascallanger
219beb4a0e
Fix Multi_status bind flag when invalid protocol selected
2017-02-08 22:42:39 +01:00
pascallanger
68e9948493
.
2017-02-07 12:09:13 +01:00
pascallanger
11650450c8
Chip select based on pin definition
2017-02-07 12:08:11 +01:00
pascallanger
bf5598515e
Removed board option in _config.h
2017-02-06 21:51:03 +01:00
pascallanger
c02f273d57
New feature: end bind
...
This new feature is available:
- in serial mode and when binding from the GUI. As soon as the Bind
window is closed = serial bind bit was set and cleared, the current bind
operation will be terminated.
- if the bind was initiated from the Bind on channel feature (bind
channel goes high) then as soon as the bind channel goes low the current
bind operation will be terminated.
Tested on ersky9x which does open a bind window, not sure about
OpenTX...
Some protocols (Hubsan, Assan, FY326, Shenqi...) which are waiting for
model/RX to reply will stay in bind mode.
2017-02-06 18:46:34 +01:00
pascallanger
0a7cd3d6e9
Reset invert serial when switching protocol
2017-02-06 15:50:43 +01:00
pascallanger
00e47b9afb
MultiOrange: add Walkera protocol
2017-02-06 10:39:58 +01:00
pascallanger
68b94cfcaa
FrSkyD small change
2017-02-06 10:32:15 +01:00
pascallanger
0068f21a2d
MultiOrange build fix
2017-02-06 10:32:15 +01:00
pascallanger
3516e5ae8a
FrSkyD telemetry fix
2017-02-04 10:11:25 +01:00
pascallanger
04bbe3187f
FrSky telemetry
2017-02-03 22:02:35 +01:00
pascallanger
877cdec4ea
Config.h
2017-02-03 21:08:10 +01:00
pascallanger
21ab94c512
FrSkyD and X telemetry
2017-02-03 21:06:21 +01:00
pascallanger
85f4dbd670
FrSkyD telemetry and serial TX buffer
2017-02-03 16:49:19 +01:00
pascallanger
f81e7cb78a
FrSkyD telemetry
2017-02-02 18:07:46 +01:00
pascallanger
773f3048f7
Devo: extended range
2017-02-02 18:07:36 +01:00
pascallanger
47b4409f3e
FrSkyD telemetry
2017-02-02 14:30:56 +01:00
pascallanger
9ce23c3d61
Protocol change: make sure that main loop is aware
2017-02-02 14:30:46 +01:00
pascallanger
4eb2d073ac
SFHSS channels mapping
2017-02-01 17:51:04 +01:00
pascallanger
021c463d80
FrSkyD telemetry
2017-02-01 12:47:28 +01:00
pascallanger
41d75da33f
FrSkyD telemetry
...
- rewritten the handling of the incoming over the air telemetry packet
- rewritten the TX_RSSI calculation (link frame[4])
- added RX LQI and TX_LQI information in the link frame (frame[5] and
frame[6])
2017-02-01 09:28:35 +01:00
pascallanger
c7e7a559a6
FrSkyD Telemetry update
2017-01-31 15:26:49 +01:00
pascallanger
4f5dfcc65b
Few comments tweak
2017-01-31 09:12:06 +01:00
pascallanger
e85208110f
FrSky D/X telemetry update
2017-01-31 08:46:58 +01:00
pascallanger
7ac2e227b1
FrSkyD: telemetry fix?
...
Added CRC check on incoming telemetry packet.
2017-01-30 21:09:27 +01:00
pascallanger
7ee918ad49
Multiprotocol status
...
Along with the latest ersky9x version, display the module version and if
a specific protocol is available or not.
2017-01-30 16:11:46 +01:00
pascallanger
e30ebd39fd
FrSkyX LBT EU addition
...
Add support for LBT EU 16/8 channels accessible through sub protocols
EU_16 and EU_8
Also includes modification of FrSkyV, D, X CC2500 initialization
2017-01-30 16:11:45 +01:00
pascallanger
7ac6ff828c
Q303: reverse A&R channels
2017-01-30 16:11:45 +01:00
pascallanger
f7448cc2e4
Fix Hopping_table[47]=0
2017-01-25 14:35:38 +01:00
pascallanger
832cb79f88
New protocol Q303
...
Q303 protocol number: 31
Sub ptotocols:
- Q303 = 0
- CX35 = 1
- CX10D = 2
- CX10WD = 3
2017-01-24 22:46:11 +01:00
pascallanger
ba7290fdda
New protocol Q303
...
Q303 protocol number: 31
Sub ptotocols:
- Q303 = 0
- CX35 = 1
- CX10D = 2
- CX10WD = 3
2017-01-24 16:58:48 +01:00
pascallanger
85ee4a95ec
Simplification of chanskip usage
2017-01-24 16:58:48 +01:00
pascallanger
eb164c511f
Update end points and map function
2017-01-24 16:58:47 +01:00
