pascallanger
0a0463652b
E129/C186 protocol
...
C186/E120 models
2022-06-27 16:59:48 +02:00
pascallanger
4f580a4286
Update Hardware.md
2022-06-16 10:36:34 +02:00
Michael
0616cab386
Fixes a problem where setting failsafe values was only possible once after bind and only set values for the first 12 channels. This fix allows setting failsafe values without having to rebind and sets failsafe values correctly for all possible 16 channels. ( #695 )
...
Notes for OpenTX/EdgeTX:
This fix doesn't exhibit servo jitter if failsafe mode was left on Custom, however it is still recommended to set failsafe mode back to Receiver after setting failsafe values.
It is still necessary to wait at least 8 seconds switching back from failsafe mode Custom to failsafe mode Receiver as OpenTX/EdgeTX will trigger the data transfer in Custom mode only every 7 seconds.
Bench tested with HoTT receivers GR-16, GR-24pro, GR-32
Flight tested with HoTT receiver GR-24
2022-06-13 14:28:21 +02:00
Michael
175cfa5e93
This is the Graupner HoTT adapted version of the Model Locator script. It uses the Graupner HoTT telemetry sensor "Rssi" instead of the OpenTX sensor "RSSI". ( #693 )
...
Reasoning: The OpenTX sensor "RSSI" is populated by the individual OpenTX telemetry protocol implementations and returns a value from 0..100 (percent) originating from the early FrSky implementation. It turns out that FrSky did not really provide a genuine signal strength indicator in units of dbm but a link quality indicator in 0..100%. With Graupner HoTT the link quality indicator is not a good basis for the model locator as it is very non-linear and doesn't change much with distance. Using the Graupner HoTT telemetry sensor "Rssi" which is a true signal strength indicator serves the purpose of locating a model much better as it varies much more with distance.
2022-06-07 10:51:26 +02:00
Pascal Langer
dbfccad568
Update DSM FwdPrg.lua
2022-04-25 10:33:16 +02:00
Pascal Langer
3fe6dc64fa
KF606/MIG320: Added LED control
2022-04-15 17:29:25 +02:00
Peter Feerick
49068af59f
fix: MultiConfig lua set and reset subProtocol ( #672 )
2022-03-25 09:12:14 +01:00
pascallanger
fbd81c6e26
Update Protocols_Details.md
2022-02-07 18:49:38 +01:00
Ryan5732
9cac96d6a7
Small Readme Typos ( #661 )
2022-02-03 14:11:26 +01:00
Pascal Langer
5987aa40a6
Another try on PA18
2022-01-25 15:21:22 +01:00
Pascal Langer
30cb812549
Try PA18
2022-01-24 08:36:00 +01:00
Pascal Langer
0fd2e36046
test PA18
2022-01-23 19:08:46 +01:00
Pascal Langer
8b05e55ebd
MT99xx2/PA18: new protocol
2022-01-23 17:56:00 +01:00
Pascal Langer
af71a208fd
Ready for release
2022-01-16 11:00:50 +01:00
mheimlich
7e5cb8e884
mention XK A800 in V911S/E119 details ( #654 )
2022-01-16 10:54:04 +01:00
MattCarothers
8c669ea015
Updated several text fields ( #651 )
2022-01-09 17:25:11 +01:00
Anders Höglund
acd8379077
A few more Spektrum Fwd Programming text updates ( #632 )
...
* DSM FP, Added AR8360T
* DSM FP, Added a few unkown empty lines
2021-11-19 08:37:28 +01:00
Pascal Langer
97c6088715
fix compilation?
2021-11-13 19:08:38 +01:00
Pascal Langer
db017c73b6
HS6200 emulation using CYRF for E01X protocol
2021-11-13 19:03:01 +01:00
Anders Höglund
24aaa0dd0c
Text updates in Spektrum Fwd Prog LUA script ( #630 )
...
* DSM FP, Added AR636B
* DSM FP, Added AR637TA
* DSM FP, Added On, conflict with AR636B
* DSM FP, Rx name conflict resolved.
2021-11-12 18:37:52 +01:00
Michael
da33df4346
added packet_in[14] to transfer HoTT device warnings to OpenTx ( #627 )
2021-11-04 14:57:25 +01:00
Pascal Langer
22590ed4f7
Update DSM FwdPrg.lua
2021-10-26 16:34:38 +02:00
Pascal Langer
c0bc64c2aa
V911S: increased bind time
2021-10-24 12:03:09 +02:00
Pascal Langer
694d968e8c
Update Propel_nrf24l01.ino
2021-10-24 11:04:57 +02:00
Pascal Langer
fff3b8830e
MT99xx/A180: F949S flags for RATE, RXLED and 3D6G
2021-10-24 11:04:44 +02:00
Pascal Langer
b740f4cd24
V911S/E119: add 6G_3D channel for P40 plane
2021-10-24 09:57:24 +02:00
Pascal Langer
e247b8b9c1
DSM Fwd Pgm updated
2021-10-20 15:13:56 +02:00
Pascal Langer
4f7af553d1
Update doc
2021-09-17 17:07:15 +02:00
Pascal Langer
570e6f8c64
Update Protocols_Details.md
2021-09-17 09:48:35 +02:00
Pascal Langer
b6e665b567
Devo: fix typo
2021-09-16 16:13:39 +02:00
Pascal Langer
48e82304a0
Update Devo_cyrf6936.ino
2021-09-16 00:30:46 +02:00
Pascal Langer
7b58b9aca0
Devo: support for 2 GPS formats
...
Use the Fixed ID field, 0/1 first GPS format, +2 for the other format -> 2/3
2021-09-16 00:11:25 +02:00
Pascal Langer
dfcf3f533c
Update NRF24l01_SPI.ino
2021-09-16 00:08:47 +02:00
Pascal Langer
4c14925b4f
Bump version for release
2021-09-12 19:35:11 +02:00
Pascal Langer
4c74bc869d
Update _Config.h
2021-09-11 00:08:09 +02:00
Pascal Langer
45edfa1ec0
AFHDS2A doc update
2021-09-10 23:58:12 +02:00
Pascal Langer
88343b7424
Proto list: fix flags
2021-09-09 08:40:09 +02:00
Pascal Langer
13197840c2
V761: code cleanup
2021-09-09 08:39:37 +02:00
Pascal Langer
ffe4ac68fd
Proto list: add number of protocols in the list
2021-09-08 14:30:01 +02:00
Pascal Langer
5bab5f03db
Update Multi_Protos.ino
2021-09-08 13:38:25 +02:00
Pascal Langer
ae748e25f8
Update XN297Dump_nrf24l01.ino
2021-09-07 23:17:21 +02:00
Pascal Langer
e9c7959ecb
Update V761_nrf24l01.ino
2021-09-07 23:17:11 +02:00
Pascal Langer
bf09855014
Another attempt
2021-09-07 16:59:06 +02:00
Pascal Langer
32bd39f209
Save space in the 5in1 modules
2021-09-07 15:07:37 +02:00
Pascal Langer
940f241b9d
Fix compilation issues
2021-09-07 14:29:35 +02:00
Pascal Langer
5c00ce6b88
New 0 protocol: enable to list all protocols and sub protocols
2021-09-07 14:08:24 +02:00
Pascal Langer
016b282246
Multi Status: send frame as soon as a new protocol is selected
2021-09-05 22:15:56 +02:00
Pascal Langer
d6ecac1302
Xerall: few improvements
2021-09-04 11:48:41 +02:00
Ben Lye
901f8ca6b0
Disable some protocols for the DIY 5-in-1 ( #618 )
2021-09-01 15:20:10 +02:00
Pascal Langer
9c3b6ba9f6
Update Validate.h
2021-09-01 09:45:38 +02:00
