pascallanger
ba7290fdda
New protocol Q303
...
Q303 protocol number: 31
Sub ptotocols:
- Q303 = 0
- CX35 = 1
- CX10D = 2
- CX10WD = 3
2017-01-24 16:58:48 +01:00
pascallanger
85ee4a95ec
Simplification of chanskip usage
2017-01-24 16:58:48 +01:00
pascallanger
eb164c511f
Update end points and map function
2017-01-24 16:58:47 +01:00
pascallanger
26e3119ef3
Use define
2017-01-24 16:58:47 +01:00
pascallanger
bc80554cd3
YD717: possible fix for old CX10
2017-01-07 13:18:18 +01:00
pascallanger
e51fb06ceb
WK2x01: added fixed id mode for WK2801
2017-01-04 11:35:38 +01:00
pascallanger
8677e73d75
WK2x01: subprotocols addition
...
WK2801 number 0, 8 channels, fixed id is not supported
WK2401 number 1, 4 channels
W6_5_1 number 2, 6 channels
W6_6_1 number 3, 7 channels
W6_HEL number 4, 6 channels, option is used to limit COL
W6_HEL_I number 5, 6 channels, COL inverted, option is used to limit COL
2017-01-03 19:56:20 +01:00
pascallanger
fbb919d767
New protocol WK2x01
...
Protocol WK2x01 number 30
Sub protocols:
- WK2801 number 0, 8 channels, fixed id not supported
- WK2601 number 1, 6/7 channels, option is used see doc for details
- WK2401 number 2, 4 channels
Extended limits supported
Autobind protocol
Most receivers support WK2801 so always start trying this sub protocol
first.
2017-01-03 19:19:53 +01:00
pascallanger
1f0f9a2eae
DSM function name change for uniqness
2017-01-03 19:07:10 +01:00
pascallanger
282b2a0a43
Bind from channel: Cosmetic code change
2017-01-03 12:00:25 +01:00
pascallanger
6d0e4d5a38
Fix Bind channel
2017-01-02 18:22:03 +01:00
pascallanger
43956bbf2c
Bind channel fix
2017-01-02 17:45:08 +01:00
pascallanger
18e31b3821
Bind channel: configurable channel number
...
Bind channel can be configured between 5 and 16.
2017-01-02 17:26:35 +01:00
pascallanger
0d0acb9d10
Bind function on channel 16
...
Toggling channel 16 (-100%->+100%->-100%) will execute a bind only if
the loaded protocol is an autobind protocol or autobind is set AND
throttle is low (below -95%).
2017-01-02 17:04:50 +01:00
pascallanger
6a792ce6a0
FrSky D and X hopping table fix
...
All RXs using these protocols must be rebinded.
2017-01-02 15:56:32 +01:00
pascallanger
917cea5052
STM32: use manuf ID as global ID
2017-01-01 12:31:13 +01:00
pascallanger
c98f0d3c81
FrSkyX: don't change ID when RX_Num changes
2016-12-29 12:24:38 +01:00
pascallanger
88d650e638
Multi.txt: add missing Q222
2016-12-29 12:22:15 +01:00
pascallanger
72ebe937fb
Multi Telemetry: fixed DSM
2016-12-23 09:48:13 +01:00
pascallanger
8efa5bc1dc
Multi Telemetry: update version
2016-12-22 10:31:00 +01:00
pascallanger
9b6d2bce58
Multi Telemetry: fix patch level
2016-12-21 20:26:31 +01:00
pascallanger
7bb26a7f07
FrSkyD and FrSkyX: random frequencies
2016-12-21 18:06:03 +01:00
pascallanger
f56c9deb00
MULTI_TELEMETRY: couple of additions
2016-12-19 17:33:30 +01:00
pascallanger
c6221fc60f
Merge pull request #35 from schwabe/multi_telemetry
...
Multi telemetry
2016-12-19 17:09:58 +01:00
pascallanger
acfe3e912e
Batch to build for OrangeTX typo
2016-12-19 17:05:13 +01:00
pascallanger
704dc803b8
MJXQ/E010: Added 1 more TXID/Freqs
2016-12-19 15:43:25 +01:00
pascallanger
e2d64e9140
ASSAN update
2016-12-19 15:43:25 +01:00
Arne Schwabe
bdef0612f7
Keep old AFHDS2A format for ersky9x
2016-12-18 16:54:44 +01:00
Arne Schwabe
a196b71d36
Implement Multiprotocol Telemetry
...
This allows the multi module to tell the TX software (e.g. OpenTX) which telemetry protocol is in use. Also Status of the module and signaling binding/invalid protocol
2016-12-18 15:40:05 +01:00
Arne Schwabe
fff8116430
Describe multi telemetry protocol
2016-12-18 15:38:44 +01:00
pascallanger
fa8d4f511f
Core: PPM not setting ID properly for some protocols
2016-12-13 20:29:21 +01:00
pascallanger
67d0e9d2c2
MJXQ: Fixed E010 and added H26WH
...
Protocol: 18
Sub_protocol for H26WH: 5
2016-12-13 14:58:02 +01:00
pascallanger
f69aae550f
Hontai: new sub_protocol FQ777_951
...
Protocol: 26
Sub protocol: 3
2016-12-12 18:07:43 +01:00
pascallanger
8dec1453c4
FY326: new sub protocol FY319
...
Protocol: 20
Sub_protocol: 1
Untested
2016-12-12 15:47:58 +01:00
pascallanger
241d1e181f
H3D: more channels
2016-12-12 14:45:36 +01:00
pascallanger
192437896d
NRF24L01 updates
2016-12-12 14:07:46 +01:00
pascallanger
18b21005f1
Q222 flags
2016-12-12 13:45:40 +01:00
pascallanger
94ac91cce3
Add more E010 TXID/Freq
...
Total 14
2016-12-12 11:20:33 +01:00
pascallanger
46e255bccc
Bayang telemetry: remove startup warning
2016-12-12 11:20:33 +01:00
pascallanger
87de5b5305
V2X2: new subprotocol JXD506
...
Protocol number: 5
Subprotocol: 1
2016-12-12 11:20:33 +01:00
pascallanger
1ddc923631
Q222: flags
2016-12-12 11:20:33 +01:00
pascallanger
bf230322d0
Bayang: change back A1/A2 to max resolution
2016-12-09 16:56:00 +01:00
pascallanger
758779a8f5
MJXQ/E010: TX IDs vs Freq
2016-12-09 16:54:24 +01:00
pascallanger
13b8475c54
Add FY805 in Multi.txt for ersky9x
2016-12-09 16:51:55 +01:00
pascallanger
d3d52b44ee
Revert "Bayang: change A1 and A2 back to maximum resolution"
...
This reverts commit d2886432b7becdb5bfe66692b396f9c6c61d7de6.
2016-12-09 16:51:17 +01:00
pascallanger
d2886432b7
Bayang: change A1 and A2 back to maximum resolution
2016-12-09 16:50:56 +01:00
pascallanger
3904c36a6e
New MT99xx subprotocol FY805
...
Protocol: MT99xx (number 17)
Subprotocol: FY805 (number 4)
Supports headless and flip. For flip I'm not sure of the flag since it
was missing from the dumps.
Untested protocol...
2016-12-09 10:19:35 +01:00
pascallanger
c2577df6f7
Bayang telemetry : sending volt/4
...
Change for Taranis
2016-12-09 08:24:51 +01:00
pascallanger
36cb0fb4cd
Bad _config.h file pushed...
2016-12-08 15:11:06 +01:00
pascallanger
e4e909737c
CX10/Q2x2 protocol update
2016-12-07 19:16:09 +01:00
