pascallanger
9ce23c3d61
Protocol change: make sure that main loop is aware
2017-02-02 14:30:46 +01:00
pascallanger
4eb2d073ac
SFHSS channels mapping
2017-02-01 17:51:04 +01:00
pascallanger
021c463d80
FrSkyD telemetry
2017-02-01 12:47:28 +01:00
pascallanger
41d75da33f
FrSkyD telemetry
...
- rewritten the handling of the incoming over the air telemetry packet
- rewritten the TX_RSSI calculation (link frame[4])
- added RX LQI and TX_LQI information in the link frame (frame[5] and
frame[6])
2017-02-01 09:28:35 +01:00
pascallanger
c7e7a559a6
FrSkyD Telemetry update
2017-01-31 15:26:49 +01:00
pascallanger
4f5dfcc65b
Few comments tweak
2017-01-31 09:12:06 +01:00
pascallanger
e85208110f
FrSky D/X telemetry update
2017-01-31 08:46:58 +01:00
pascallanger
7ac2e227b1
FrSkyD: telemetry fix?
...
Added CRC check on incoming telemetry packet.
2017-01-30 21:09:27 +01:00
pascallanger
7ee918ad49
Multiprotocol status
...
Along with the latest ersky9x version, display the module version and if
a specific protocol is available or not.
2017-01-30 16:11:46 +01:00
pascallanger
e30ebd39fd
FrSkyX LBT EU addition
...
Add support for LBT EU 16/8 channels accessible through sub protocols
EU_16 and EU_8
Also includes modification of FrSkyV, D, X CC2500 initialization
2017-01-30 16:11:45 +01:00
pascallanger
7ac6ff828c
Q303: reverse A&R channels
2017-01-30 16:11:45 +01:00
pascallanger
f7448cc2e4
Fix Hopping_table[47]=0
2017-01-25 14:35:38 +01:00
pascallanger
832cb79f88
New protocol Q303
...
Q303 protocol number: 31
Sub ptotocols:
- Q303 = 0
- CX35 = 1
- CX10D = 2
- CX10WD = 3
2017-01-24 22:46:11 +01:00
pascallanger
ba7290fdda
New protocol Q303
...
Q303 protocol number: 31
Sub ptotocols:
- Q303 = 0
- CX35 = 1
- CX10D = 2
- CX10WD = 3
2017-01-24 16:58:48 +01:00
pascallanger
85ee4a95ec
Simplification of chanskip usage
2017-01-24 16:58:48 +01:00
pascallanger
eb164c511f
Update end points and map function
2017-01-24 16:58:47 +01:00
pascallanger
26e3119ef3
Use define
2017-01-24 16:58:47 +01:00
pascallanger
bc80554cd3
YD717: possible fix for old CX10
2017-01-07 13:18:18 +01:00
pascallanger
e51fb06ceb
WK2x01: added fixed id mode for WK2801
2017-01-04 11:35:38 +01:00
pascallanger
8677e73d75
WK2x01: subprotocols addition
...
WK2801 number 0, 8 channels, fixed id is not supported
WK2401 number 1, 4 channels
W6_5_1 number 2, 6 channels
W6_6_1 number 3, 7 channels
W6_HEL number 4, 6 channels, option is used to limit COL
W6_HEL_I number 5, 6 channels, COL inverted, option is used to limit COL
2017-01-03 19:56:20 +01:00
pascallanger
fbb919d767
New protocol WK2x01
...
Protocol WK2x01 number 30
Sub protocols:
- WK2801 number 0, 8 channels, fixed id not supported
- WK2601 number 1, 6/7 channels, option is used see doc for details
- WK2401 number 2, 4 channels
Extended limits supported
Autobind protocol
Most receivers support WK2801 so always start trying this sub protocol
first.
2017-01-03 19:19:53 +01:00
pascallanger
1f0f9a2eae
DSM function name change for uniqness
2017-01-03 19:07:10 +01:00
pascallanger
282b2a0a43
Bind from channel: Cosmetic code change
2017-01-03 12:00:25 +01:00
pascallanger
6d0e4d5a38
Fix Bind channel
2017-01-02 18:22:03 +01:00
pascallanger
43956bbf2c
Bind channel fix
2017-01-02 17:45:08 +01:00
pascallanger
18e31b3821
Bind channel: configurable channel number
...
Bind channel can be configured between 5 and 16.
2017-01-02 17:26:35 +01:00
pascallanger
0d0acb9d10
Bind function on channel 16
...
Toggling channel 16 (-100%->+100%->-100%) will execute a bind only if
the loaded protocol is an autobind protocol or autobind is set AND
throttle is low (below -95%).
2017-01-02 17:04:50 +01:00
pascallanger
6a792ce6a0
FrSky D and X hopping table fix
...
All RXs using these protocols must be rebinded.
2017-01-02 15:56:32 +01:00
pascallanger
917cea5052
STM32: use manuf ID as global ID
2017-01-01 12:31:13 +01:00
pascallanger
c98f0d3c81
FrSkyX: don't change ID when RX_Num changes
2016-12-29 12:24:38 +01:00
pascallanger
88d650e638
Multi.txt: add missing Q222
2016-12-29 12:22:15 +01:00
pascallanger
72ebe937fb
Multi Telemetry: fixed DSM
2016-12-23 09:48:13 +01:00
pascallanger
8efa5bc1dc
Multi Telemetry: update version
2016-12-22 10:31:00 +01:00
pascallanger
9b6d2bce58
Multi Telemetry: fix patch level
2016-12-21 20:26:31 +01:00
pascallanger
7bb26a7f07
FrSkyD and FrSkyX: random frequencies
2016-12-21 18:06:03 +01:00
pascallanger
f56c9deb00
MULTI_TELEMETRY: couple of additions
2016-12-19 17:33:30 +01:00
pascallanger
c6221fc60f
Merge pull request #35 from schwabe/multi_telemetry
...
Multi telemetry
2016-12-19 17:09:58 +01:00
pascallanger
acfe3e912e
Batch to build for OrangeTX typo
2016-12-19 17:05:13 +01:00
pascallanger
704dc803b8
MJXQ/E010: Added 1 more TXID/Freqs
2016-12-19 15:43:25 +01:00
pascallanger
e2d64e9140
ASSAN update
2016-12-19 15:43:25 +01:00
Arne Schwabe
bdef0612f7
Keep old AFHDS2A format for ersky9x
2016-12-18 16:54:44 +01:00
Arne Schwabe
a196b71d36
Implement Multiprotocol Telemetry
...
This allows the multi module to tell the TX software (e.g. OpenTX) which telemetry protocol is in use. Also Status of the module and signaling binding/invalid protocol
2016-12-18 15:40:05 +01:00
Arne Schwabe
fff8116430
Describe multi telemetry protocol
2016-12-18 15:38:44 +01:00
pascallanger
fa8d4f511f
Core: PPM not setting ID properly for some protocols
2016-12-13 20:29:21 +01:00
pascallanger
67d0e9d2c2
MJXQ: Fixed E010 and added H26WH
...
Protocol: 18
Sub_protocol for H26WH: 5
2016-12-13 14:58:02 +01:00
pascallanger
f69aae550f
Hontai: new sub_protocol FQ777_951
...
Protocol: 26
Sub protocol: 3
2016-12-12 18:07:43 +01:00
pascallanger
8dec1453c4
FY326: new sub protocol FY319
...
Protocol: 20
Sub_protocol: 1
Untested
2016-12-12 15:47:58 +01:00
pascallanger
241d1e181f
H3D: more channels
2016-12-12 14:45:36 +01:00
pascallanger
192437896d
NRF24L01 updates
2016-12-12 14:07:46 +01:00
pascallanger
18b21005f1
Q222 flags
2016-12-12 13:45:40 +01:00
