Pascal Langer
9e8978166e
New CABELL protocol
...
Protocol number: 34
sub_protocols:
0 CABELL_V3
1 CABELL_V3_TELEMETRY
6 CABELL_SET_FAIL_SAFE
7 CABELL_UNBIND
2017-11-23 18:44:31 +01:00
Pascal Langer
6bf873f4db
timing
2017-11-23 15:53:15 +01:00
Pascal Langer
1318f1a29b
S-FHSS failsafe again...
2017-11-23 15:51:07 +01:00
Pascal Langer
205d728798
S-FHSS Failsafe: SFHSS_FAILSAFE_THROTTLE
2017-11-22 15:21:36 +01:00
Pascal Langer
bd9c772a52
S-FHSS: fix failsafe
2017-11-22 14:51:45 +01:00
Pascal Langer
76e9002995
S-FHSS failsafe
2017-11-22 13:56:42 +01:00
Pascal Langer
41f0a712fd
S-FHSS improvements
2017-11-21 21:45:03 +01:00
Pascal Langer
35089febab
SFHSS subprotocols
2017-11-20 22:02:14 +01:00
Pascal Langer
a95fd1e1d8
SFHSS sub protocols
2017-11-20 21:58:01 +01:00
Pascal Langer
b15a5d4a45
Flysky and Assan output map
2017-11-20 19:12:37 +01:00
Pascal Langer
113caf4970
AVR Boards: auto bootloader setting
2017-11-20 17:04:38 +01:00
Pascal Langer
8ea70a1b77
Tons of updates
2017-11-20 16:01:12 +01:00
pascallanger
af88abb13f
Delete FrSkyX_cc2500.ino
2017-11-20 15:53:00 +01:00
hexfet
a1fb4a0ac5
Revert terminating newline.
2017-07-22 22:41:34 -04:00
hexfet
ebf0c4fae6
Change spaces to tabs.
2017-07-22 22:39:26 -04:00
hexfet
44a086a27b
Revert terminating newline.
2017-07-22 22:35:43 -04:00
hexfet
4624075112
Update sequence number logic to send invalid sequence indicator when invalid sequence detected. Works to resync telemetry stream as tested with EU firmware version.
2017-07-22 22:07:42 -04:00
Arne Schwabe
3850ce88d3
DSM: Remove special bind stick positionsD
...
Spektrum own remotes transmit normal values during bind and actually use this (e.g. Nano CP X) to select the transmitter mode (e.g. computer vs non-computer radio, so always end normal output
2017-04-12 16:10:18 +02:00
pascallanger
700b922350
Fix AFHDS2A power issue
2017-04-10 11:33:26 +02:00
pascallanger
bdfeeb9a41
Fix STM32 issue and OrangeTX compilation
2017-04-10 11:24:21 +02:00
pascallanger
32c59cb583
DM002
2017-03-23 20:48:34 +01:00
pascallanger
940a89fa38
DM002: 2 TX ID/RF & features addition
2017-03-23 18:05:00 +01:00
pascallanger
59af0594dc
DM002: correct channels
2017-03-22 16:17:12 +01:00
pascallanger
8cf6d4f7d8
add DM002
2017-03-22 14:58:59 +01:00
pascallanger
995bb921c1
DM002 protocol
...
protocol number 33
sub_protocol none=0
ch5=flip
ch6=led
ch7=headless
2017-03-22 14:55:55 +01:00
pascallanger
d7076f5295
PPM: add MIN_PPM_CHANNELS and MAX_PPM_CHANNELS
2017-02-28 10:36:35 +01:00
pascallanger
29a5397491
SLT: revert to previous version
2017-02-28 10:33:43 +01:00
pascallanger
a3927218a6
Futaba middle value 1520
2017-02-24 20:22:28 +01:00
pascallanger
a19a14665f
GW008 Autobind protocol
2017-02-24 13:41:32 +01:00
pascallanger
55bc6f9a00
FrSkyX telemetry RSSI and LQi
2017-02-24 13:27:19 +01:00
pascallanger
997d31addd
FrSkyX add telemetry TX_RSSI, RX_LQI, TX_LQI
2017-02-24 11:48:25 +01:00
pascallanger
548390b0d7
GW008 protocol addition
...
Protocol number: 32
No sub_protocol
2017-02-24 11:00:10 +01:00
pascallanger
846e09c7cb
Disable low power by default
2017-02-23 11:23:25 +01:00
pascallanger
2ba3552578
AFHDS2A: prevent TX inbound swamping during bind
2017-02-23 10:07:09 +01:00
pascallanger
943bb6d15b
SFHSS reverse channels direction
2017-02-23 09:15:12 +01:00
pascallanger
14ca63571d
Fix OrangeTX compilation
2017-02-21 14:20:25 +01:00
pascallanger
d9fb856eb8
Fix Multi OrangeTX build
2017-02-21 00:29:48 +01:00
pascallanger
9ee0311ea9
FrSkyD compilation issue without telemetry
2017-02-11 11:40:40 +01:00
pascallanger
0c5fae01b5
WAIT_FOR_BIND feature
...
This feature will not activate the selected protocol unless a bind is
requested using bind from channel or the GUI "Bind" button. It is only
enabled if bind from channel and autobind are set since I think they are
working well together.
The goal is to prevent binding other people's model when powering up the
TX, changing model or scanning through protocols.
There is a new blinking pattern associated to it as well as a new status
"Waiting for bind".
This feature is enabled by default in _config.h .
2017-02-10 17:38:07 +01:00
pascallanger
219beb4a0e
Fix Multi_status bind flag when invalid protocol selected
2017-02-08 22:42:39 +01:00
pascallanger
68e9948493
.
2017-02-07 12:09:13 +01:00
pascallanger
11650450c8
Chip select based on pin definition
2017-02-07 12:08:11 +01:00
pascallanger
bf5598515e
Removed board option in _config.h
2017-02-06 21:51:03 +01:00
pascallanger
c02f273d57
New feature: end bind
...
This new feature is available:
- in serial mode and when binding from the GUI. As soon as the Bind
window is closed = serial bind bit was set and cleared, the current bind
operation will be terminated.
- if the bind was initiated from the Bind on channel feature (bind
channel goes high) then as soon as the bind channel goes low the current
bind operation will be terminated.
Tested on ersky9x which does open a bind window, not sure about
OpenTX...
Some protocols (Hubsan, Assan, FY326, Shenqi...) which are waiting for
model/RX to reply will stay in bind mode.
2017-02-06 18:46:34 +01:00
pascallanger
0a7cd3d6e9
Reset invert serial when switching protocol
2017-02-06 15:50:43 +01:00
pascallanger
00e47b9afb
MultiOrange: add Walkera protocol
2017-02-06 10:39:58 +01:00
pascallanger
68b94cfcaa
FrSkyD small change
2017-02-06 10:32:15 +01:00
pascallanger
0068f21a2d
MultiOrange build fix
2017-02-06 10:32:15 +01:00
pascallanger
3516e5ae8a
FrSkyD telemetry fix
2017-02-04 10:11:25 +01:00
pascallanger
04bbe3187f
FrSky telemetry
2017-02-03 22:02:35 +01:00
