- Change how PPM is handled with a resolution of 2048 and scaled to match serial input range. PPM is now fully scaled for all protocols which was not the case before. If you are using PPM, you might have to adjust the end points depending on the protocols.
- Change all range conversions to use 2048 where possible
- Updated all protocols with new range functions
- Protocols which are taking advantage of 2048 are Assan, FrSky V/D/X, DSM, Devo, WK2x01
- Renamed AUX xto CHx for code readbility
Implemented debug output on uart1 for stm32
Replaced hardcoded eeprom offsets with documented constats
Fixed a bug affecting telemetry on Atmega328p using the invert_telemetry flag.
This new feature is available:
- in serial mode and when binding from the GUI. As soon as the Bind
window is closed = serial bind bit was set and cleared, the current bind
operation will be terminated.
- if the bind was initiated from the Bind on channel feature (bind
channel goes high) then as soon as the bind channel goes low the current
bind operation will be terminated.
Tested on ersky9x which does open a bind window, not sure about
OpenTX...
Some protocols (Hubsan, Assan, FY326, Shenqi...) which are waiting for
model/RX to reply will stay in bind mode.
Lot of changes in this new master
ChangeLog:
- Core: LED flashing when an invalid protocol has been selected
- Core: Channels 5 to 12 available as switches for all protocols: code
and size optimization
- Documentation (readme.md): fully updated, all protocols/sub
protocols/channels described, models example, many improvements
- All protocols have been updated in some way, here are some highlights:
* Bayang: added picture, video and inverted channels
* CG023->H8_3D: added light and calibration channels
* CX10: added sub protocols Q282, JC3015_1, JC3015_2, MK33041
* ESky: added new protocol - untested
* Hubsan: added compatibility with the new Hubsan Plus protocol
* KN: fully rewritten protocol: added sub protocols WLTOYS and FEILUN,
11 channels support
New version successfully tested on all my models: Flysky RX/F939/V911
protocol Flysky, Frsky RX protocol Frsky, Hubsan X4 protocol Hubsan,
Hisky HCP100/HCP80 protocol Hisky, HK-3000/HK3100 RX protocol
Hisky/HK310, XINXUN X39 protocol YD717/XINXUN, Symax X5C-1 protocol
SymaX/SYMAX, Cheerson CX-10A protocol CX10/BLUE, Eachine 3D-X4 protocol
CG023.
To access new protocols from er9x/ersky9x, you need to build a version
from this github repository https://github.com/pascallanger/mbtx based
on the latest er9x r820 and ersky9x r218.
