Loads of protocols have been touched by this change. Some testing has been done but please test on all your models.
The XN297 emulation selects in this order:
- the CC2500 if it is available and bitrate=250K. Configure the option field automatically for RF tune.
- the NRF for all bitrates if it is available
- if NRF is not available and bitrate=1M then an invalid protocol is sent automatically to the radio.
CC2500 @250K can now receive normal and enhanced payloads.
OMP protocol supports telemetry on CC2500 and is also for NRF only modules including telemetry.
Separation of E016H (new protocol) from E01X due to different structure.
MJXQ, MT99XX, Q303 and XK: some sub protocols available on CC2500 only.
Changed telemetry configuration and validation for AFHDS2A and HUBSAN
Added default Bayang telemetry from Silverxxx:
- Option=1 to activate telemetry (option=0 -> standard Bayang protocol)
- Value returned to the TX: RX RSSI, TX RSSI, A1=uncompensated battery
voltage, A2=compensated battery voltage
Loads of changes:
STM32 board introduction: NOT TESTED
XMEGA renamed to ORANGE_TX to be more explicit
DSM: added reset if cyrf freezed
Validate: added a validate file to verify the different compilation
options
Lot of changes in this new master
ChangeLog:
- Core: LED flashing when an invalid protocol has been selected
- Core: Channels 5 to 12 available as switches for all protocols: code
and size optimization
- Documentation (readme.md): fully updated, all protocols/sub
protocols/channels described, models example, many improvements
- All protocols have been updated in some way, here are some highlights:
* Bayang: added picture, video and inverted channels
* CG023->H8_3D: added light and calibration channels
* CX10: added sub protocols Q282, JC3015_1, JC3015_2, MK33041
* ESky: added new protocol - untested
* Hubsan: added compatibility with the new Hubsan Plus protocol
* KN: fully rewritten protocol: added sub protocols WLTOYS and FEILUN,
11 channels support
New version successfully tested on all my models: Flysky RX/F939/V911
protocol Flysky, Frsky RX protocol Frsky, Hubsan X4 protocol Hubsan,
Hisky HCP100/HCP80 protocol Hisky, HK-3000/HK3100 RX protocol
Hisky/HK310, XINXUN X39 protocol YD717/XINXUN, Symax X5C-1 protocol
SymaX/SYMAX, Cheerson CX-10A protocol CX10/BLUE, Eachine 3D-X4 protocol
CG023.
To access new protocols from er9x/ersky9x, you need to build a version
from this github repository https://github.com/pascallanger/mbtx based
on the latest er9x r820 and ersky9x r218.
