midelic
d451af365a
Fix telemetry FrSkyX protocol
2017-11-04 17:14:29 +01:00
midelic
57a78535f2
updated version number
2017-10-20 17:06:45 +01:00
midelic
0f752e2571
Add STM32 bootloader files_2
2017-08-03 18:55:04 +03:00
midelic
ca6cd65d46
Revert "Revert "Add STM32 bootloader files""
...
This reverts commit ddc287a84ec8e303cf68b56d20769286f6b9dead.
2017-08-03 18:41:06 +03:00
midelic
ddc287a84e
Revert "Add STM32 bootloader files"
...
This reverts commit c92ec031ae8f3407fca520daee50d428c60659e7.
2017-08-03 18:40:03 +03:00
midelic
c92ec031ae
Add STM32 bootloader files
2017-08-03 18:39:21 +03:00
midelic
ef2d4d6b12
Add flashing with TX for STM32_board
2017-07-31 22:21:41 +03:00
midelic
2753f6c4e5
added Mike Blandord modifications
...
- used bootloader to flash multi-module with TX
-updated FrslyX protocol telemetry sequence
2017-07-28 23:39:51 +03:00
hexfet
a1fb4a0ac5
Revert terminating newline.
2017-07-22 22:41:34 -04:00
hexfet
ebf0c4fae6
Change spaces to tabs.
2017-07-22 22:39:26 -04:00
hexfet
44a086a27b
Revert terminating newline.
2017-07-22 22:35:43 -04:00
hexfet
4624075112
Update sequence number logic to send invalid sequence indicator when invalid sequence detected. Works to resync telemetry stream as tested with EU firmware version.
2017-07-22 22:07:42 -04:00
Arne Schwabe
3850ce88d3
DSM: Remove special bind stick positionsD
...
Spektrum own remotes transmit normal values during bind and actually use this (e.g. Nano CP X) to select the transmitter mode (e.g. computer vs non-computer radio, so always end normal output
2017-04-12 16:10:18 +02:00
pascallanger
700b922350
Fix AFHDS2A power issue
2017-04-10 11:33:26 +02:00
pascallanger
bdfeeb9a41
Fix STM32 issue and OrangeTX compilation
2017-04-10 11:24:21 +02:00
pascallanger
32c59cb583
DM002
2017-03-23 20:48:34 +01:00
pascallanger
940a89fa38
DM002: 2 TX ID/RF & features addition
2017-03-23 18:05:00 +01:00
pascallanger
59af0594dc
DM002: correct channels
2017-03-22 16:17:12 +01:00
pascallanger
8cf6d4f7d8
add DM002
2017-03-22 14:58:59 +01:00
pascallanger
995bb921c1
DM002 protocol
...
protocol number 33
sub_protocol none=0
ch5=flip
ch6=led
ch7=headless
2017-03-22 14:55:55 +01:00
pascallanger
d7076f5295
PPM: add MIN_PPM_CHANNELS and MAX_PPM_CHANNELS
2017-02-28 10:36:35 +01:00
pascallanger
29a5397491
SLT: revert to previous version
2017-02-28 10:33:43 +01:00
pascallanger
a3927218a6
Futaba middle value 1520
2017-02-24 20:22:28 +01:00
pascallanger
a19a14665f
GW008 Autobind protocol
2017-02-24 13:41:32 +01:00
pascallanger
55bc6f9a00
FrSkyX telemetry RSSI and LQi
2017-02-24 13:27:19 +01:00
pascallanger
997d31addd
FrSkyX add telemetry TX_RSSI, RX_LQI, TX_LQI
2017-02-24 11:48:25 +01:00
pascallanger
548390b0d7
GW008 protocol addition
...
Protocol number: 32
No sub_protocol
2017-02-24 11:00:10 +01:00
pascallanger
846e09c7cb
Disable low power by default
2017-02-23 11:23:25 +01:00
pascallanger
2ba3552578
AFHDS2A: prevent TX inbound swamping during bind
2017-02-23 10:07:09 +01:00
pascallanger
943bb6d15b
SFHSS reverse channels direction
2017-02-23 09:15:12 +01:00
pascallanger
14ca63571d
Fix OrangeTX compilation
2017-02-21 14:20:25 +01:00
pascallanger
d9fb856eb8
Fix Multi OrangeTX build
2017-02-21 00:29:48 +01:00
pascallanger
9ee0311ea9
FrSkyD compilation issue without telemetry
2017-02-11 11:40:40 +01:00
pascallanger
0c5fae01b5
WAIT_FOR_BIND feature
...
This feature will not activate the selected protocol unless a bind is
requested using bind from channel or the GUI "Bind" button. It is only
enabled if bind from channel and autobind are set since I think they are
working well together.
The goal is to prevent binding other people's model when powering up the
TX, changing model or scanning through protocols.
There is a new blinking pattern associated to it as well as a new status
"Waiting for bind".
This feature is enabled by default in _config.h .
2017-02-10 17:38:07 +01:00
pascallanger
219beb4a0e
Fix Multi_status bind flag when invalid protocol selected
2017-02-08 22:42:39 +01:00
pascallanger
68e9948493
.
2017-02-07 12:09:13 +01:00
pascallanger
11650450c8
Chip select based on pin definition
2017-02-07 12:08:11 +01:00
pascallanger
bf5598515e
Removed board option in _config.h
2017-02-06 21:51:03 +01:00
pascallanger
c02f273d57
New feature: end bind
...
This new feature is available:
- in serial mode and when binding from the GUI. As soon as the Bind
window is closed = serial bind bit was set and cleared, the current bind
operation will be terminated.
- if the bind was initiated from the Bind on channel feature (bind
channel goes high) then as soon as the bind channel goes low the current
bind operation will be terminated.
Tested on ersky9x which does open a bind window, not sure about
OpenTX...
Some protocols (Hubsan, Assan, FY326, Shenqi...) which are waiting for
model/RX to reply will stay in bind mode.
2017-02-06 18:46:34 +01:00
pascallanger
0a7cd3d6e9
Reset invert serial when switching protocol
2017-02-06 15:50:43 +01:00
pascallanger
00e47b9afb
MultiOrange: add Walkera protocol
2017-02-06 10:39:58 +01:00
pascallanger
68b94cfcaa
FrSkyD small change
2017-02-06 10:32:15 +01:00
pascallanger
0068f21a2d
MultiOrange build fix
2017-02-06 10:32:15 +01:00
pascallanger
3516e5ae8a
FrSkyD telemetry fix
2017-02-04 10:11:25 +01:00
pascallanger
04bbe3187f
FrSky telemetry
2017-02-03 22:02:35 +01:00
pascallanger
877cdec4ea
Config.h
2017-02-03 21:08:10 +01:00
pascallanger
21ab94c512
FrSkyD and X telemetry
2017-02-03 21:06:21 +01:00
pascallanger
85f4dbd670
FrSkyD telemetry and serial TX buffer
2017-02-03 16:49:19 +01:00
pascallanger
f81e7cb78a
FrSkyD telemetry
2017-02-02 18:07:46 +01:00
pascallanger
773f3048f7
Devo: extended range
2017-02-02 18:07:36 +01:00
