Pascal Langer
c658a892f2
Fix some compilation issues
2018-11-07 15:52:39 +01:00
Pascal Langer
3f0d6cfcf1
Typo fix
2018-11-07 10:48:11 +01:00
Pascal Langer
c3ff49e86e
E01X new protocol
...
New protocol E01X number 45
Sub protocol E012 number 0
Sub protocol E015 number 1
Channels:
ARM_SW CH5
FLIP_SW CH6
LED_SW CH7
HEADLESS_SW CH8
RTH_SW CH9
2018-11-06 22:06:19 +01:00
Pascal Langer
e51f91f041
Bugs protocol fix?
2018-11-06 21:43:55 +01:00
Pascal Langer
2589c67f6c
NCC1701 fix
2018-11-05 20:03:39 +01:00
Pascal Langer
ea96c328fc
Protocol NCC1701
...
CH5: Warp
Telemetry:
A1 voltage is used for crash detection. In case of a crash A1=0V. You can be assign a sound to the crash.
2018-11-03 17:24:47 +01:00
Pascal Langer
f42da14413
New NCC1701 protocol
...
NCC1701 - 44
Model: Air Hogs Star Trek USS Enterprise NCC-1701-A
Autobind protocol
Only 9 IDs available, cycle through them using RX_Num.
2018-11-02 21:20:57 +01:00
Pascal Langer
10788976b6
New protocol BUGSMINI
...
Models: MJX Bugs 3 Mini and 3H
Protocol BUGSMINI = 42
No sub_protocol
Telemetry = RX RSSI and battery voltage good/warning/bad
RX_Num is used to give a number to a given model. You must use a different RX_Num per MJX Bugs Mini. A maximum of 16 Bugs Mini are supported.
Channels:
ARM CH5
ANGLE CH6
FLIP CH7
PICTURE CH8
VIDEO CH9
LED CH10
2018-10-17 13:23:27 +02:00
Pascal Langer
b40e7d6e97
Bugs: fixed telemetry disable compilation error
2018-10-11 17:58:07 +02:00
Pascal Langer
5cf8d8d263
ESKY protocol code review
2018-09-15 08:02:05 -04:00
Pascal Langer
058e09c413
_config.h descriptions update
2018-09-13 17:25:49 -04:00
Pascal Langer
63fb1b1f36
Removed old SLT sub protocols
2018-09-12 14:24:30 -04:00
Pascal Langer
c153d236f2
SLT Q100/Q200/MR100: reverse elevator
2018-09-12 06:49:40 -04:00
Pascal Langer
f4691d08cc
SLT Q100/Q200/MRT100: reverse throttle
2018-09-11 15:51:28 -04:00
Pascal Langer
8901310ed4
BUGS: fix?
2018-09-11 04:59:07 -04:00
Pascal Langer
09c6adaa95
BUGS: fix
2018-09-10 21:28:37 -04:00
Pascal Langer
5fe1e9674e
DSM functions and variables renamed
2018-09-10 09:58:31 +02:00
Pascal Langer
27dc02fdec
SLT sub protocol Q100
...
CH9 FMODE
CH10 FLIP
CH13 Gyro calib
2018-09-10 08:11:56 +02:00
Pascal Langer
03f417546e
Multi.txt update
2018-09-09 11:29:25 +02:00
Pascal Langer
3b9aa79201
SLT sub protocol MR100 for Vista
...
CH9: MODE
CH10: FLIP
CH11: VIDEO
CH12:PICTURE
2018-09-09 11:26:01 +02:00
Pascal Langer
e2a66bdd1f
SLT/Q200: gyro calibration on CH13
2018-09-07 10:38:22 +02:00
Pascal Langer
d67108fa8b
SLT/Q200: Fix frequencies calculation
2018-09-06 10:57:36 +02:00
Pascal Langer
b7447f055a
SLT/Q200 subprotocol changes
2018-09-05 15:38:36 +02:00
Pascal Langer
51ba7cf75c
Update SLT/Q200 hopping freq
2018-09-03 17:30:53 +02:00
Pascal Langer
82fb5dd0da
SLT: added sub_protocols
...
SLT (11) sub_protocols are now
- V1 (0): original 6 channels
- V2 (1): 6 channels, might be able to add channel 7 and 8 but need testing
- Q200 (2): 5 channels + switches: CH9=FMODE, CH10=FLIP, CH11=VIDON, CH12=VIDOFF
2018-09-03 16:02:43 +02:00
Pascal Langer
655ea98bf1
Hubsan/H501: removed useless channels headless2 and osd
2018-08-31 00:01:05 +02:00
Pascal Langer
f515ba79af
Hubsan sub_protocol 501 features
...
sub_protocol H501
Model H122D: add flip on ch13 and OSD on ch14
Model H123D: add flight modes on ch16 -> -100% Sport mode 1,0% Sport mode 2, +100% Acro
2018-08-29 17:29:50 +02:00
Pascal Langer
b3576b7162
BUGS protocol
...
Add channel for ANGLE/ACRO mode. Angle is +100%, acro is -100%.
Channels mapping:
ARM CH5
ANGLE CH6
FLIP CH7
PICTURE CH8
VIDEO CH9
LED CH10
2018-08-29 14:44:10 +02:00
Pascal Langer
e7449897f9
BUGS new protocol
...
BUGS new protocol (number 41)
Models: Bugs 3, 6 and 8
Autobind protocol
Telemetry: TX & RX RSSI, Battery voltage good/bad
ARM CH5
LED CH6
FLIP CH7
PICTURE CH8
VIDEO CH9
2018-08-28 16:13:28 +02:00
Pascal Langer
4bb4bd9792
New protocol WFLY (40)
...
Use the CYRF6936 RF component
Extended limit supported
No sub protocol
option=number of channels between 4 and 9. If outside of the range default=9.
2018-08-21 14:58:44 +02:00
Ben Lye
1647d3d841
Add stm32 serial upload method which includes bootloader ( #180 )
2018-08-10 20:11:32 +01:00
Pascal Langer
2f5252ab88
Hitec: new sub_protocol to support forward telemetry
...
OPT_FW (0) : OPTIMA + forward telemetry packets to TX to be decoded
OPT_HUB (1) : OPTIMA + basic telemetry using FrSky Hub format
MINIMA (2) : Minima/Micro/RED
2018-08-09 19:51:07 +02:00
Pascal Langer
74ab2a4bd7
_Config.h tweaks
2018-08-09 09:59:30 +02:00
Pascal Langer
edd4f740e0
Hitec correction
2018-08-08 14:54:37 +02:00
Pascal Langer
d0c9bc801b
Hitec: typo in telemetry
2018-08-08 12:44:56 +02:00
Pascal Langer
73dd63caa1
Hitec telemetry comments
2018-08-08 00:37:59 +02:00
Pascal Langer
f105d7c7eb
Hitec full telemetry
2018-08-08 00:30:19 +02:00
Pascal Langer
9ab5353122
Hitec full telemetry description
2018-08-07 19:35:31 +02:00
Pascal Langer
9f09c81ef4
Hitec: Minima fix
2018-08-07 13:24:45 +02:00
Pascal Langer
bf09177916
Hitec improvement
...
Added 3rd byte of TX ID
Reproduce the F5 frames from original TX
2018-08-06 18:32:39 +02:00
Pascal Langer
d71640ad7e
Hitec comments
2018-08-06 01:42:12 +02:00
Pascal Langer
68afcc0c44
Hitec try for Minima
...
Add F5 packets
2018-08-05 15:46:24 +02:00
Pascal Langer
9b30a3d72a
FrSky X: SPORT polling
...
Mike's corrections to make SPORT working on Taranis.
2018-08-04 23:47:15 +02:00
Pascal Langer
d9f343e20b
Hitec: new protocol
...
Hitec protocol using the CC2500 RF component
Protocol number: 39
Sub protocols:
- Optima (0): the TX must be really close to the RX for the bind negociation to complete.
- Minima (1): untested
Optima supports basic telemetry using the FrSky Hub format: RX volt, TX RSSI,&LQI
2018-08-03 18:29:24 +02:00
Pascal Langer
236b375669
Corona: FD_V3 sub protocol
...
New subprotocol for FlyDream V3 number 2.
2018-07-20 19:13:56 +02:00
Pascal Langer
ad18856f7a
AFHDS2A limit to 12 channels
2018-07-20 19:11:03 +02:00
Pascal Langer
9015b78aaf
1.2.0.21
2018-07-20 15:54:01 +02:00
Pascal Langer
f9f265271a
Fix AFHDS2A
...
Fix bind issue with AFHDS2A
Add frskyd hub telemetry voltage 2 from external battery
Removed cflie warnings...
2018-07-20 15:24:33 +02:00
Arne Schwabe
add3fb13ef
Fix module id returned to be 0 when saved to eeprom ( #170 )
...
Also fix that stm32 id is always either 0 or stm32 id
2018-06-12 12:41:38 +02:00
James Hagerman
07adeaf60d
Adding CFlie protocol ( #159 )
2018-05-04 16:12:04 +02:00