pascallanger
821732bba9
Initial S.Port send
...
!!! No retransmit for now !!!
2019-09-30 17:35:12 +02:00
pascallanger
b6df650f50
Update BOM_DIY_ATmega.md
2019-09-29 15:13:47 +02:00
pascallanger
e783ce5788
Failsafe modification
...
The following protocols are supporting failsafe: FrSkyX, Devo, WK2x01, SFHSS, HISKY/HK310 and AFHDS2A
In Serial mode failsafe is configured on the radio itself.
In PPM mode and only after the module is up and fully operational, press the bind button for at least 5sec to send the current stick positions as failsafe to the RX.
2019-09-27 16:20:43 +02:00
pascallanger
18af4a0724
AVR modules: Fix KF606, GD00X and Potensic
2019-09-26 15:51:28 +02:00
pascallanger
7e6ec1dc8d
Update FrSkyX_Rx_cc2500.ino
...
Remove compilation warnings for AVR
2019-09-26 15:50:38 +02:00
pascallanger
4fbe0859e0
Update comments
2019-09-25 19:10:55 +02:00
pascallanger
b89c23fe7c
PPM channel remapping
2019-09-23 18:13:25 +02:00
goebish
e038c49ae9
Protocol FrskyX D16 RX frequency auto-tune ( #270 )
...
* Add autotune during bind
* Fix data phase
2019-09-23 08:11:06 +02:00
Ben Lye
bed02c9384
Update .travis.yml ( #269 )
2019-09-22 14:17:23 -04:00
pascallanger
96bc4f7cdf
Revert Fix FrskyX failsafe hold/no pulse inversion
2019-09-22 20:00:04 +02:00
pascallanger
6503469ddd
Bump multi board version to the latest
2019-09-22 17:29:43 +02:00
pascallanger
61a1c3742c
Fix FrskyX failsafe hold/no pulse inversion
2019-09-22 17:12:00 +02:00
pascallanger
1fb2a38bc1
Hitec additional telemetry
2019-09-22 17:11:23 +02:00
pascallanger
22a0d79315
FrskyX_RX documentation
2019-09-22 17:05:46 +02:00
MRC3742
0cc72772a3
Repair sub protocol column listing errors for two Protocol ( #268 )
2019-09-19 20:13:13 +02:00
Pascal Langer
11f4e636e3
AFHDS2A telemetry fix
...
Discard RX config packets
2019-09-19 10:51:24 +02:00
pascallanger
fef1a2e041
Update Advanced_Debug.md
2019-09-19 09:07:14 +02:00
pascallanger
41a9c8e013
Update Advanced_Debug.md
2019-09-19 08:59:40 +02:00
Pascal Langer
c1ad02b792
Create Debug1.png
2019-09-19 08:55:20 +02:00
Pascal Langer
ab2315c951
FrSkyX: few cosmetic and optimization changes
2019-09-18 11:05:46 +02:00
goebish
7948e33cbc
Fix start channel ( #267 )
2019-09-18 08:48:04 +02:00
goebish
2be2dce584
Protocol FrSky D16 receiver ( #266 )
...
* Add skeleton for FrSkyX receiver protocol
* Binds & receives data packets
* Store bind information
* Fix compilation
* Bypass LNA since intended usage implies tx & rx are close together
* Bind channel has FS_AUTOCAL
* Add freq fine tune & low power mode (disable lna)
* Add TX ID check
* Retry longer until first packet is catched
* Fix chanskip for first packet
* Fix defines
* Fix bind
* Send channels to TX
* Fix RSSI reading
* Add missing static keyword
* Fix Validate.h
* Fix compilation
2019-09-17 23:35:19 +02:00
Ben Lye
69bdfe3dba
Update package_multi_4in1_board_index.json
2019-09-17 20:36:24 +01:00
Pascal Langer
d73d163a58
Update Validate.h
2019-09-17 09:53:18 +02:00
Ben Lye
48a52ae5b2
Update Multiprotocol.ino ( #265 )
2019-09-17 09:37:18 +02:00
Pascal Langer
078dc2ab17
AFHDS2A telemetry AA and AC
2019-09-14 16:34:19 +02:00
Pascal Langer
6f4522caa6
Revert "AFHDS2A telemetry AA and AC"
...
This reverts commit 3c76ce9f39c3d4e48a2a7d9482fc152533a189aa.
2019-09-14 16:31:27 +02:00
Pascal Langer
3c76ce9f39
AFHDS2A telemetry AA and AC
2019-09-14 16:27:07 +02:00
goebish
8601149051
Fix scanner telemetry ( #262 )
...
* Fix scanner telemetry
* Take several samples per channel, keep maximum value
2019-09-14 16:07:49 +02:00
pascallanger
d7ef15d435
Update Compiling_STM32.md
2019-09-12 16:08:20 +02:00
pascallanger
27e3645b56
Update Compiling_STM32.md
2019-09-12 15:55:08 +02:00
pascallanger
95eb4e1a22
Update Compiling_STM32.md
2019-09-12 15:54:18 +02:00
pascallanger
32ea07bf5a
Update Compiling_STM32.md
2019-09-12 15:51:58 +02:00
pascallanger
06272575c5
Flash from TX
2019-09-12 15:50:12 +02:00
Pascal Langer
edd6432d4c
Update Validate.h
2019-09-11 15:26:35 +02:00
Pascal Langer
303c4615e9
Fix scanner compilation issue
2019-09-11 12:23:36 +02:00
Pascal Langer
7d327c1622
Scanner 2.4GHz
...
Thanks to Goebish for this spectrum analyzer.
It will work soon with the OpenTX 2.3 Spectrum Analyser tool.
2019-09-10 23:37:54 +02:00
Ben Lye
6a74b83f98
Update .travis.yml
2019-09-08 14:40:59 +01:00
Ben Lye
c601c2dd98
Update .travis.yml
2019-09-08 14:25:52 +01:00
Ben Lye
c27b60749f
Update Travis CI script ( #257 )
...
* Use latest STM32 board options
* Use latest Arduino IDE
* Fix build functions to return an error if the build fails
* Modify the files that get exported to releases
2019-09-08 13:33:26 +01:00
Ben Lye
b3cb286088
Update package_multi_4in1_board_index.json
2019-09-07 18:54:27 +01:00
Ben Lye
361903e8ec
Doc updates for new board package ( #256 )
2019-09-07 18:23:08 +01:00
Ben Lye
d72c69242d
Update package_multi_4in1_board_index.json
...
Add AVR board v1.0.8 and STM32 board v1.1.5.
2019-09-06 19:43:10 +01:00
Ben Lye
539819fa0c
Accomodate new Debug Option setting in Arduino IDE ( #255 )
...
Thanks, that's perfect!
2019-09-06 14:05:57 +02:00
Ben Lye
d80c218744
Add timeout to serial debug ( #253 )
...
* Wait 30s for serial debug instead of waiting forever
* Delay of 50ms to allow FTDI debugger to connect at startup
2019-09-05 08:33:01 +02:00
pascallanger
0603d220a9
T16 Flash from TX
2019-09-04 17:39:47 +02:00
pascallanger
e13fe56f47
Include the Jumper T16
2019-09-04 17:38:00 +02:00
pascallanger
acd7694485
Update Protocols_Details.md
2019-09-02 19:23:15 +02:00
pascallanger
7f50edacc8
Update Protocols_Details.md
2019-09-02 19:07:48 +02:00
pascallanger
5a4906c5b5
Update Protocols_Details.md
2019-09-02 19:06:34 +02:00
