Pascal Langer
9461f2d632
V761 3rd ID
2019-06-09 14:50:17 +02:00
Pascal Langer
f6064d03e1
V761 aileron channel
2019-06-08 21:57:02 +02:00
Pascal Langer
862ab48bbc
Update V761_nrf24l01.ino
2019-06-06 10:26:54 +02:00
Pascal Langer
f498347c53
V761 second TX ID/freqs
2019-06-06 10:07:57 +02:00
Pascal Langer
3f77f59c8a
XN297L emu scramble option
2019-06-06 01:15:28 +02:00
Pascal Langer
1fa6e4526b
Include full xn297(L) xor tables
2019-06-05 23:23:27 +02:00
Pascal Langer
3853d585a0
XN297L/CC2500 emulation on V911s
2019-06-05 22:53:24 +02:00
Pascal Langer
e8c6225ef0
New XN297L 250Kbps emu layer based on CC2500
...
This layer can be enabled/disabled with the option XN297L_CC2500_EMU in _config.h
Protocols which are using it so far:
GD00X, KF606 and MJXQ/E010&PHOENIX
2019-06-05 21:54:47 +02:00
Pascal Langer
17c67cc780
Update V761_nrf24l01.ino
2019-06-04 22:42:37 +02:00
Pascal Langer
6a7c735924
Fix V761 input
2019-06-04 22:02:20 +02:00
Pascal Langer
a15a911f8e
New protocol KF606
...
Model: KF606
Protocol: 49
No sub protocol
Channels: throttle, aileron and trim on ch5
2019-06-04 21:44:40 +02:00
Pascal Langer
ded0487ce6
XN297Dump improvements
...
Selection of address length
Timing accuracy
2019-06-04 21:41:50 +02:00
goebish
0cbe4de920
Fix E010/CC2500 Protocol on AVR ( #229 )
...
* Use cc2500 fast frequency hopping
* Calibrate cc2500 PLL if sub-protocol is E010/Phoenix only
* Fix e010 crc for AVR
2019-05-31 09:17:27 +02:00
Pascal Langer
c9fecafada
WFly frequency tunning
2019-05-18 20:33:32 +02:00
Pascal Langer
f3ca7ad644
WFly freq tuning on channel 15
...
You need to enable the tuning in _config.h: #define USE_CYRF6936_CH15_TUNING
2019-05-18 17:36:39 +02:00
Pascal Langer
18dcc29a0d
XN297Dump: auto scramble detection
2019-05-17 20:34:02 +02:00
Pascal Langer
c3a5c263d3
XN297Dump fix CRC...
2019-05-17 19:56:52 +02:00
Pascal Langer
ccdf60d525
XN297DUMP: dynamic address search
...
The dump process is now looking for addresses with different length (3..5) additonnaly to the packet length.
Untested...
2019-05-17 17:00:08 +02:00
Pascal Langer
443e1cec75
New protocol V761
...
Protocol number: 48
Sub_protocol: none
Channel 5: +100% expert, 0% mid=gyro on no rate limits, -100% beginer=gyro on and axis rate limited.
ONLY 1 ID IS AVAILABLE SO BE CAREFUL WHILE FLYING.
2019-05-17 16:25:39 +02:00
goebish
aa540514b8
Use CC2500 if available instead of NRF24L01 for E010 and PHOENIX ( #225 )
...
* Use CC2500 if available instead of NRF24L01 for E010 and PHOENIX sub protocols
* Update documentation
* Why do I always swap below & above ?
2019-05-16 13:17:39 +02:00
Pascal Langer
2e24323adf
DHD D4 set to high rates
2019-05-10 21:39:15 +02:00
Pascal Langer
259d550d04
AFHDS2A: stop bind process as requested
2019-05-10 19:39:14 +02:00
Pascal Langer
1a8f9c5a12
AFHDS2A extended telemetry forward
2019-05-10 18:17:09 +02:00
Pascal Langer
1916eb3095
AFHDS2A: add debug on full telemetry frames
2019-05-10 11:04:21 +02:00
Pascal Langer
fc3eec7ae1
BUSMINI: 3H altitude hold mode on CH11
2019-05-09 23:56:06 +02:00
Pascal Langer
511f77f5e7
Bayang DHD D4 sub protocol
2019-05-09 18:23:19 +02:00
Pascal Langer
6748f6ce78
Add XN297 Dump protocol
...
Protocol number: 63
Sub protocols: 0=250Kb, 1=1Mb, 2=2Mb
Option: -1=scan RF channels, 0-84=RF channel
DEBUG_SERIAL must be enabled
If a valid frame is received the frame will be sent on the serial port.
2019-05-08 22:01:24 +02:00
Pascal Langer
2b47958207
Debug on AFHDS2A telemetry
2019-05-06 22:39:18 +02:00
Pascal Langer
5538d4d1c4
AFHDS2A update RF channels and Failsafe
...
You need to bind all the RXs again...
2019-04-26 17:51:14 +02:00
Pascal Langer
21790a9725
BUGSMINI sub protocol BUGS3H
2019-04-18 10:44:42 +02:00
Pascal Langer
6bc22c8ac4
BUGSMINI telemetry fix
2019-04-15 23:28:24 +02:00
Pascal Langer
ac1c422f14
Update Multi.txt
2019-04-15 10:51:28 +02:00
Pascal Langer
c673b4254f
MJXQ (18) new sub protocol PHOENIX (6)
2019-04-15 10:48:20 +02:00
Pascal Langer
96db173694
BUS Mini: Dynamic trims
2019-04-15 10:31:18 +02:00
Pascal Langer
56f9672896
Update GD00X_nrf24l01.ino
2019-04-11 22:47:01 +02:00
Pascal Langer
303b3f08b8
GD00X V2: 64 IDs
2019-04-11 22:42:00 +02:00
Pascal Langer
150e3fd92e
GD00x V2 support
...
Only 1 ID available for now.
Protocol: 47
Sub-protocol: 1
Channels: same as V1
2019-04-09 22:39:03 +02:00
Pascal Langer
840b01273c
Update GD00X_nrf24l01.ino
2019-04-03 09:25:48 +02:00
Pascal Langer
8a7beda339
E016H calibration
2019-04-03 09:06:15 +02:00
Pascal Langer
0095071ebf
E016 fix
2019-04-02 09:16:13 +02:00
Pascal Langer
c250c91ab4
BUGSMINI flip issue fix
2019-03-11 10:03:16 +01:00
Brian
b1ac10a4c4
Add Silverware's analog aux channel feature to Bayang protocol ( #215 )
...
* Expanded Bayang protocol to have Option 2, which adds two analog auxiliary channels driven by channels 14 and 15. The expert byte is taken over, as is the extra txid byte, which is not used by Silverware.
* Change Bayang options - Bit 0 (LSB) enables telemetry and Bit 1 selects analog aux channels
* Changed Bayang protocol bind to ensure binding only when telemetry and analog aux option selections match on RX and TX
* Add details for Bayang protocol update
2019-03-03 20:47:58 +01:00
Pascal Langer
af4185fbea
Fix E01X BV statements
2019-03-03 20:42:26 +01:00
Pascal Langer
74cc63e6dd
E016H typo fix
2019-02-28 21:45:16 +01:00
Pascal Langer
536d7f6124
E016H subprotocol addition to E01X
...
Protocol E01X (45)
Subprotocol E016H (2)
Channels:
CH5=STOP
CH6=FLIP
CH8=HEADLESS
CH9=RTH
2019-02-28 21:11:05 +01:00
Pascal Langer
15dfe8cead
Fix E01X hang up when option=0
2019-01-09 16:56:53 +01:00
Pascal Langer
103acb8294
Add PPM protocol list definition in _MyConfig.h
2018-12-10 11:34:11 +01:00
Pascal Langer
9a61b2701e
GD00X: Implement general ID/Freq
2018-11-25 20:52:44 +01:00
MRC3742
d8224ebefe
Correction in example file of #define Module_3 ( #205 )
2018-11-25 19:13:44 +01:00
Pascal Langer
cc2af73a05
Bayang Visuo support, DSM TH_KILL improvement
2018-11-23 10:03:55 +01:00
