* #751 DSM Enhancements
#751 DSM Forward Programming Enhancements (New GUI, etc)
* Make both work on EdgeTx and OpenTX
* #751 Turn OFF simulation by default
Distribution code with RX simulation OFF
Simulation should be only for Development
* #751 Update Readme Documentation
Updated the Readme.txt documentation
and removed compiled luac file that was check in by mistake
* #751 Fix problems With Reset RX
1. Fix problem when trying to Factory Reset. Enter Bind Mode. Save backup, Restore Backup
2. Found a way to advance on the Gyro initial Setup menus.. a bit of a hack, but works.
3. Handle RX resets properly. It needed after initial setup
* #751 Cosmetic and Show Orientation Images
#751
1. Fix problems when text contradictions between Menu/Line Headers and List Values
2. Show Images of RX orientations
3. Able to Hack getting into Initial Setup and other menus who was failing before
4. Custumize the way Flight Mode reports the Value on Screen
* #751 add check for required libraries
Add check that the required files in DSMLIB exist
* #751
Write documentation about the protocol so that we don't forget later what we know, and enable others to understand the logs and maybe help solve problems.
* #766
Change the way to detect that the files exist. now works on both ETX and OTX
* #766 Strange Flickering in OTX
Strange Flickering happening on OTX. Refreshing the screen on every cycle fixed the problem
* #766 Change way of dectecting EdgeTX
Change way of detecting OTX in multiple versions: OTX 2.3.14 and 2.3.15
* #766 make editable Gain Values
Gains and other settings should be editable even when they are VALUE_NOCHANGING. Flight Mode is an exception that is handled properly. Right align numbers.
* #766 More enhacements
Added AR630
Make numbers right justified
Cleanup some log messages and line types.
Updated DSM FWD prog documentation
* #751 more cosmetic things
1. Added AR10360T,
2. Simplify way to configured the hack for more receivers.
3. Change some texts on menus to march spektrum
4. Background color in Spektrum theme to match
* #751 A few final changes
1. Update channel names to include channel number. i.e: Ch5 (Gear)
2, Fix flight mode display for Heli Receiver
3. i think the unknown lines are to request info about the TX settings
* #751
1. Added Warning Screen
2. Correct handling of Unknown lines in Gyro Settings->Initial Setup
Co-authored-by: pascallanger <pascal_langer@yahoo.fr>
* #751 DSM Enhancements
#751 DSM Forward Programming Enhancements (New GUI, etc)
* Make both work on EdgeTx and OpenTX
* #751 Turn OFF simulation by default
Distribution code with RX simulation OFF
Simulation should be only for Development
* #751 Update Readme Documentation
Updated the Readme.txt documentation
and removed compiled luac file that was check in by mistake
* #751 Fix problems With Reset RX
1. Fix problem when trying to Factory Reset. Enter Bind Mode. Save backup, Restore Backup
2. Found a way to advance on the Gyro initial Setup menus.. a bit of a hack, but works.
3. Handle RX resets properly. It needed after initial setup
* #751 Cosmetic and Show Orientation Images
#751
1. Fix problems when text contradictions between Menu/Line Headers and List Values
2. Show Images of RX orientations
3. Able to Hack getting into Initial Setup and other menus who was failing before
4. Custumize the way Flight Mode reports the Value on Screen
* #751 add check for required libraries
Add check that the required files in DSMLIB exist
* #751
Write documentation about the protocol so that we don't forget later what we know, and enable others to understand the logs and maybe help solve problems.
* #766
Change the way to detect that the files exist. now works on both ETX and OTX
* #766 Strange Flickering in OTX
Strange Flickering happening on OTX. Refreshing the screen on every cycle fixed the problem
* #766 Change way of dectecting EdgeTX
Change way of detecting OTX in multiple versions: OTX 2.3.14 and 2.3.15
* #766 make editable Gain Values
Gains and other settings should be editable even when they are VALUE_NOCHANGING. Flight Mode is an exception that is handled properly. Right align numbers.
* #766 More enhacements
Added AR630
Make numbers right justified
Cleanup some log messages and line types.
Updated DSM FWD prog documentation
* #751 more cosmetic things
1. Added AR10360T,
2. Simplify way to configured the hack for more receivers.
3. Change some texts on menus to march spektrum
4. Background color in Spektrum theme to match
* #751 A few final changes
1. Update channel names to include channel number. i.e: Ch5 (Gear)
2, Fix flight mode display for Heli Receiver
3. i think the unknown lines are to request info about the TX settings
Co-authored-by: pascallanger <pascal_langer@yahoo.fr>
* #751 DSM Enhancements
#751 DSM Forward Programming Enhancements (New GUI, etc)
* Make both work on EdgeTx and OpenTX
* #751 Turn OFF simulation by default
Distribution code with RX simulation OFF
Simulation should be only for Development
* #751 Update Readme Documentation
Updated the Readme.txt documentation
and removed compiled luac file that was check in by mistake
* #751 Fix problems With Reset RX
1. Fix problem when trying to Factory Reset. Enter Bind Mode. Save backup, Restore Backup
2. Found a way to advance on the Gyro initial Setup menus.. a bit of a hack, but works.
3. Handle RX resets properly. It needed after initial setup
* #751 Cosmetic and Show Orientation Images
#751
1. Fix problems when text contradictions between Menu/Line Headers and List Values
2. Show Images of RX orientations
3. Able to Hack getting into Initial Setup and other menus who was failing before
4. Custumize the way Flight Mode reports the Value on Screen
* #751 add check for required libraries
Add check that the required files in DSMLIB exist
* #751
Write documentation about the protocol so that we don't forget later what we know, and enable others to understand the logs and maybe help solve problems.
* #766
Change the way to detect that the files exist. now works on both ETX and OTX
* #766 Strange Flickering in OTX
Strange Flickering happening on OTX. Refreshing the screen on every cycle fixed the problem
* #766 Change way of dectecting EdgeTX
Change way of detecting OTX in multiple versions: OTX 2.3.14 and 2.3.15
* #766 make editable Gain Values
Gains and other settings should be editable even when they are VALUE_NOCHANGING. Flight Mode is an exception that is handled properly. Right align numbers.
* #766 More enhacements
Added AR630
Make numbers right justified
Cleanup some log messages and line types.
Updated DSM FWD prog documentation
* #751 more cosmetic things
1. Added AR10360T,
2. Simplify way to configured the hack for more receivers.
3. Change some texts on menus to march spektrum
4. Background color in Spektrum theme to match
Co-authored-by: pascallanger <pascal_langer@yahoo.fr>
* #751 DSM Enhancements
#751 DSM Forward Programming Enhancements (New GUI, etc)
* Make both work on EdgeTx and OpenTX
* #751 Turn OFF simulation by default
Distribution code with RX simulation OFF
Simulation should be only for Development
* #751 Update Readme Documentation
Updated the Readme.txt documentation
and removed compiled luac file that was check in by mistake
* #751 Fix problems With Reset RX
1. Fix problem when trying to Factory Reset. Enter Bind Mode. Save backup, Restore Backup
2. Found a way to advance on the Gyro initial Setup menus.. a bit of a hack, but works.
3. Handle RX resets properly. It needed after initial setup
* #751 Cosmetic and Show Orientation Images
#751
1. Fix problems when text contradictions between Menu/Line Headers and List Values
2. Show Images of RX orientations
3. Able to Hack getting into Initial Setup and other menus who was failing before
4. Custumize the way Flight Mode reports the Value on Screen
* #751 add check for required libraries
Add check that the required files in DSMLIB exist
* #751
Write documentation about the protocol so that we don't forget later what we know, and enable others to understand the logs and maybe help solve problems.
* #766
Change the way to detect that the files exist. now works on both ETX and OTX
* #766 Strange Flickering in OTX
Strange Flickering happening on OTX. Refreshing the screen on every cycle fixed the problem
* #766 Change way of dectecting EdgeTX
Change way of detecting OTX in multiple versions: OTX 2.3.14 and 2.3.15
* #766 make editable Gain Values
Gains and other settings should be editable even when they are VALUE_NOCHANGING. Flight Mode is an exception that is handled properly. Right align numbers.
* #766 More enhacements
Added AR630
Make numbers right justified
Cleanup some log messages and line types.
Updated DSM FWD prog documentation
Co-authored-by: pascallanger <pascal_langer@yahoo.fr>
* #751 DSM Enhancements
#751 DSM Forward Programming Enhancements (New GUI, etc)
* Make both work on EdgeTx and OpenTX
* #751 Turn OFF simulation by default
Distribution code with RX simulation OFF
Simulation should be only for Development
* #751 Update Readme Documentation
Updated the Readme.txt documentation
and removed compiled luac file that was check in by mistake
* #751 Fix problems With Reset RX
1. Fix problem when trying to Factory Reset. Enter Bind Mode. Save backup, Restore Backup
2. Found a way to advance on the Gyro initial Setup menus.. a bit of a hack, but works.
3. Handle RX resets properly. It needed after initial setup
* #751 Cosmetic and Show Orientation Images
#751
1. Fix problems when text contradictions between Menu/Line Headers and List Values
2. Show Images of RX orientations
3. Able to Hack getting into Initial Setup and other menus who was failing before
4. Custumize the way Flight Mode reports the Value on Screen
* #751 add check for required libraries
Add check that the required files in DSMLIB exist
* #751
Write documentation about the protocol so that we don't forget later what we know, and enable others to understand the logs and maybe help solve problems.
* #766
Change the way to detect that the files exist. now works on both ETX and OTX
* #766 Strange Flickering in OTX
Strange Flickering happening on OTX. Refreshing the screen on every cycle fixed the problem
* #766 Change way of dectecting EdgeTX
Change way of detecting OTX in multiple versions: OTX 2.3.14 and 2.3.15
* #766 make editable Gain Values
Gains and other settings should be editable even when they are VALUE_NOCHANGING. Flight Mode is an exception that is handled properly. Right align numbers.
Co-authored-by: pascallanger <pascal_langer@yahoo.fr>
* #751 DSM Enhancements
#751 DSM Forward Programming Enhancements (New GUI, etc)
* Make both work on EdgeTx and OpenTX
* #751 Turn OFF simulation by default
Distribution code with RX simulation OFF
Simulation should be only for Development
* #751 Update Readme Documentation
Updated the Readme.txt documentation
and removed compiled luac file that was check in by mistake
* #751 Fix problems With Reset RX
1. Fix problem when trying to Factory Reset. Enter Bind Mode. Save backup, Restore Backup
2. Found a way to advance on the Gyro initial Setup menus.. a bit of a hack, but works.
3. Handle RX resets properly. It needed after initial setup
* #751 Cosmetic and Show Orientation Images
#751
1. Fix problems when text contradictions between Menu/Line Headers and List Values
2. Show Images of RX orientations
3. Able to Hack getting into Initial Setup and other menus who was failing before
4. Custumize the way Flight Mode reports the Value on Screen
* #751 add check for required libraries
Add check that the required files in DSMLIB exist
* #751
Write documentation about the protocol so that we don't forget later what we know, and enable others to understand the logs and maybe help solve problems.
* #766
Change the way to detect that the files exist. now works on both ETX and OTX
* #766 Strange Flickering in OTX
Strange Flickering happening on OTX. Refreshing the screen on every cycle fixed the problem
* #766 Change way of dectecting EdgeTX
Change way of detecting OTX in multiple versions: OTX 2.3.14 and 2.3.15
Co-authored-by: pascallanger <pascal_langer@yahoo.fr>
* #751 DSM Enhancements
#751 DSM Forward Programming Enhancements (New GUI, etc)
* Make both work on EdgeTx and OpenTX
* #751 Turn OFF simulation by default
Distribution code with RX simulation OFF
Simulation should be only for Development
* #751 Update Readme Documentation
Updated the Readme.txt documentation
and removed compiled luac file that was check in by mistake
* #751 Fix problems With Reset RX
1. Fix problem when trying to Factory Reset. Enter Bind Mode. Save backup, Restore Backup
2. Found a way to advance on the Gyro initial Setup menus.. a bit of a hack, but works.
3. Handle RX resets properly. It needed after initial setup
* #751 Cosmetic and Show Orientation Images
#751
1. Fix problems when text contradictions between Menu/Line Headers and List Values
2. Show Images of RX orientations
3. Able to Hack getting into Initial Setup and other menus who was failing before
4. Custumize the way Flight Mode reports the Value on Screen
* #751 add check for required libraries
Add check that the required files in DSMLIB exist
* #751
Write documentation about the protocol so that we don't forget later what we know, and enable others to understand the logs and maybe help solve problems.
Co-authored-by: pascallanger <pascal_langer@yahoo.fr>
* #751 DSM Enhancements
#751 DSM Forward Programming Enhancements (New GUI, etc)
* Make both work on EdgeTx and OpenTX
* #751 Turn OFF simulation by default
Distribution code with RX simulation OFF
Simulation should be only for Development
* #751 Update Readme Documentation
Updated the Readme.txt documentation
and removed compiled luac file that was check in by mistake
* #751 Fix problems With Reset RX
1. Fix problem when trying to Factory Reset. Enter Bind Mode. Save backup, Restore Backup
2. Found a way to advance on the Gyro initial Setup menus.. a bit of a hack, but works.
3. Handle RX resets properly. It needed after initial setup
* #751 Cosmetic and Show Orientation Images
#751
1. Fix problems when text contradictions between Menu/Line Headers and List Values
2. Show Images of RX orientations
3. Able to Hack getting into Initial Setup and other menus who was failing before
4. Custumize the way Flight Mode reports the Value on Screen
* #751 add check for required libraries
Add check that the required files in DSMLIB exist
Co-authored-by: pascallanger <pascal_langer@yahoo.fr>
* #751 DSM Enhancements
#751 DSM Forward Programming Enhancements (New GUI, etc)
* Make both work on EdgeTx and OpenTX
* #751 Turn OFF simulation by default
Distribution code with RX simulation OFF
Simulation should be only for Development
* #751 Update Readme Documentation
Updated the Readme.txt documentation
and removed compiled luac file that was check in by mistake
* #751 Fix problems With Reset RX
1. Fix problem when trying to Factory Reset. Enter Bind Mode. Save backup, Restore Backup
2. Found a way to advance on the Gyro initial Setup menus.. a bit of a hack, but works.
3. Handle RX resets properly. It needed after initial setup
* #751 Cosmetic and Show Orientation Images
#751
1. Fix problems when text contradictions between Menu/Line Headers and List Values
2. Show Images of RX orientations
3. Able to Hack getting into Initial Setup and other menus who was failing before
4. Custumize the way Flight Mode reports the Value on Screen
Co-authored-by: pascallanger <pascal_langer@yahoo.fr>
* #751 DSM Enhancements
#751 DSM Forward Programming Enhancements (New GUI, etc)
* Make both work on EdgeTx and OpenTX
* #751 Turn OFF simulation by default
Distribution code with RX simulation OFF
Simulation should be only for Development
* #751 Update Readme Documentation
Updated the Readme.txt documentation
and removed compiled luac file that was check in by mistake
* #751 Fix problems With Reset RX
1. Fix problem when trying to Factory Reset. Enter Bind Mode. Save backup, Restore Backup
2. Found a way to advance on the Gyro initial Setup menus.. a bit of a hack, but works.
3. Handle RX resets properly. It needed after initial setup
Co-authored-by: pascallanger <pascal_langer@yahoo.fr>
* #751 DSM Enhancements
#751 DSM Forward Programming Enhancements (New GUI, etc)
* Make both work on EdgeTx and OpenTX
* #751 Turn OFF simulation by default
Distribution code with RX simulation OFF
Simulation should be only for Development
* #751 Update Readme Documentation
Updated the Readme.txt documentation
and removed compiled luac file that was check in by mistake
Co-authored-by: pascallanger <pascal_langer@yahoo.fr>
Reversing 'Off' and 'On' text values in lines #555 and #556. They are used in the SAFE and AS3X menu items in the DSM Forward Programming section, and they are functioning backwards. This will correct the issue. This is the fix for Issue #728
Reasoning: The OpenTX sensor "RSSI" is populated by the individual OpenTX telemetry protocol implementations and returns a value from 0..100 (percent) originating from the early FrSky implementation. It turns out that FrSky did not really provide a genuine signal strength indicator in units of dbm but a link quality indicator in 0..100%. With Graupner HoTT the link quality indicator is not a good basis for the model locator as it is very non-linear and doesn't change much with distance. Using the Graupner HoTT telemetry sensor "Rssi" which is a true signal strength indicator serves the purpose of locating a model much better as it varies much more with distance.
Loads of protocols have been touched by this change. Some testing has been done but please test on all your models.
The XN297 emulation selects in this order:
- the CC2500 if it is available and bitrate=250K. Configure the option field automatically for RF tune.
- the NRF for all bitrates if it is available
- if NRF is not available and bitrate=1M then an invalid protocol is sent automatically to the radio.
CC2500 @250K can now receive normal and enhanced payloads.
OMP protocol supports telemetry on CC2500 and is also for NRF only modules including telemetry.
Separation of E016H (new protocol) from E01X due to different structure.
MJXQ, MT99XX, Q303 and XK: some sub protocols available on CC2500 only.
