pascallanger
e51fb06ceb
WK2x01: added fixed id mode for WK2801
2017-01-04 11:35:38 +01:00
pascallanger
fbb919d767
New protocol WK2x01
...
Protocol WK2x01 number 30
Sub protocols:
- WK2801 number 0, 8 channels, fixed id not supported
- WK2601 number 1, 6/7 channels, option is used see doc for details
- WK2401 number 2, 4 channels
Extended limits supported
Autobind protocol
Most receivers support WK2801 so always start trying this sub protocol
first.
2017-01-03 19:19:53 +01:00
pascallanger
282b2a0a43
Bind from channel: Cosmetic code change
2017-01-03 12:00:25 +01:00
pascallanger
6d0e4d5a38
Fix Bind channel
2017-01-02 18:22:03 +01:00
pascallanger
43956bbf2c
Bind channel fix
2017-01-02 17:45:08 +01:00
pascallanger
18e31b3821
Bind channel: configurable channel number
...
Bind channel can be configured between 5 and 16.
2017-01-02 17:26:35 +01:00
pascallanger
0d0acb9d10
Bind function on channel 16
...
Toggling channel 16 (-100%->+100%->-100%) will execute a bind only if
the loaded protocol is an autobind protocol or autobind is set AND
throttle is low (below -95%).
2017-01-02 17:04:50 +01:00
pascallanger
917cea5052
STM32: use manuf ID as global ID
2017-01-01 12:31:13 +01:00
pascallanger
7bb26a7f07
FrSkyD and FrSkyX: random frequencies
2016-12-21 18:06:03 +01:00
pascallanger
f56c9deb00
MULTI_TELEMETRY: couple of additions
2016-12-19 17:33:30 +01:00
Arne Schwabe
a196b71d36
Implement Multiprotocol Telemetry
...
This allows the multi module to tell the TX software (e.g. OpenTX) which telemetry protocol is in use. Also Status of the module and signaling binding/invalid protocol
2016-12-18 15:40:05 +01:00
pascallanger
fa8d4f511f
Core: PPM not setting ID properly for some protocols
2016-12-13 20:29:21 +01:00
pascallanger
dfd8d0fa3d
Added: Bayang telemetry
...
Changed telemetry configuration and validation for AFHDS2A and HUBSAN
Added default Bayang telemetry from Silverxxx:
- Option=1 to activate telemetry (option=0 -> standard Bayang protocol)
- Value returned to the TX: RX RSSI, TX RSSI, A1=uncompensated battery
voltage, A2=compensated battery voltage
2016-12-06 22:30:48 +01:00
pascallanger
8f0ecac842
Core: stop transmitting if serial or ppm signal disappears
2016-12-04 18:58:29 +01:00
pascallanger
c24f7a86d4
Flysky/CX20 reversed elevator channel
2016-12-02 20:28:47 +01:00
pascallanger
33d676e1fe
Core: option to reverse input channels
2016-12-01 22:30:27 +01:00
pascallanger
c9de0b4cf2
Q2X2 protocol addition for Q222/Q242/Q282
...
Q2X2 protocol : 29
Sub-protocols:
- Q222 : 0
- Q242 : 1
- Q282 : 2
2016-11-23 21:56:00 +01:00
pascallanger
4f9f10ddf2
Core: blinking pattern for PPM signal detection
2016-11-18 16:51:52 +01:00
pascallanger
4348f4b0d4
STM32: USART init changed
2016-11-06 16:34:40 +01:00
Arne Schwabe
7840438bfc
Allow TX to request forwarding of FlySky telemetry data
2016-11-05 01:21:26 +01:00
pascallanger
f56ca6318a
STM32: align STM32 code with other platforms for tx_pause/tx_resume
2016-10-27 11:15:25 +02:00
pascallanger
909fb2eb2b
AFHDS2A: working version
...
- Wait for transmit completion before switching to RX (no more fixed
delays...)
- Verify if data has been received before processing it (better handling
of telemetry)
- Added TX_RSSI (along with the existing RX_RSSI)
Known issue: RX_RSSI value needs to be looked at. I'm seeing only values
between 157 (bad) and 196 (good). Is this normal for this protocol?
2016-10-26 13:51:54 +02:00
pascallanger
999c630c5a
AFHDS2A protocol addition: UNTESTED
...
Protocol number: 28
Sub protocols: PWM_IBUS = 0, PPM_IBUS = 1, PWM_SBUS = 2, PPM_SBUS = 3
Option value =0->50Hz, =1->400Hz, =2->5Hz
Extended channel range supported
Telemetry supported for voltage and RSSI (RX RSSI)
2016-10-20 19:29:52 +02:00
pascallanger
eb6fc4f8cf
Fix for STM32 board
2016-10-17 08:37:09 +02:00
pascallanger
8a177c34fa
Added Arduino.h for stm32 board
2016-10-16 23:25:52 +02:00
pascallanger
f557609e9e
STM32 board & DSM fixes
...
Loads of changes:
STM32 board introduction: NOT TESTED
XMEGA renamed to ORANGE_TX to be more explicit
DSM: added reset if cyrf freezed
Validate: added a validate file to verify the different compilation
options
2016-10-16 19:51:52 +02:00
pascallanger
cf607e892b
OrangeTX Cyrf reset pin
2016-09-22 08:29:29 +02:00
pascallanger
cfcd6e5f93
Code cleanup
2016-09-21 14:28:37 +02:00
pascallanger
73aab88109
Some cleanning
2016-09-20 18:27:09 +02:00
pascallanger
beb692a3c4
Fix pins again...
2016-09-20 01:04:25 +02:00
pascallanger
fcd47ecec6
Correct pins...
2016-09-19 23:43:14 +02:00
Mike Morrison
bb9018c094
made pins configurable and added support for nano
2016-09-16 20:34:28 -07:00
pascallanger
3d7bc6583d
Fix LED blink in PPM mode
2016-09-16 16:56:46 +02:00
pascallanger
99e8be227e
PPM Telemetry: added serial speeds
...
Only supported for none invert telemetry:
FrSkyD (Incl Hubsan): 9600bps
FrSkyX: 57600bps
DSM: 125000bps
2016-09-16 10:39:44 +02:00
pascallanger
b1c38cc793
Typo...
2016-09-15 16:02:36 +02:00
pascallanger
04bdf3f26a
Multi core extended to support up to 63 protocols
...
Compatible with ersky9x at this time.
2016-09-15 12:38:49 +02:00
pascallanger
47bae63548
Orange TX module compilation fixes
2016-09-12 21:44:30 +02:00
pascallanger
236ac52925
Fix global ID random
2016-09-12 16:41:40 +02:00
pascallanger
d4b85e3b1c
Hontai protocol & Bit bashing pause/resume
2016-09-09 18:34:29 +02:00
pascallanger
4daec3794e
Renamed FrSky protocols to match with receivers
2016-09-03 11:49:25 +02:00
pascallanger
ec2086e0f7
Fixed invert serial compilation
2016-09-01 20:12:17 +02:00
pascallanger
043a8336e5
Code cleaning (XMEGA)
2016-09-01 17:41:38 +02:00
pascallanger
e51615f520
DSM2 renamed to DSM
2016-09-01 14:00:49 +02:00
pascallanger
8150504ea0
NRF CE
2016-09-01 13:05:56 +02:00
pascallanger
dcbc377c62
FrSky1 optim
2016-08-31 15:54:24 +02:00
pascallanger
7b65233699
FrSky 1way protocol + cosmetic
2016-08-31 15:43:45 +02:00
pascallanger
eabfd8b5c4
Important changes of the scheduler and interrupts
2016-08-31 10:26:27 +02:00
pascallanger
03640e6d37
Changed update_serial_data
2016-08-29 17:32:21 +02:00
pascallanger
2588011524
Orange DSM module update
2016-08-29 09:51:34 +02:00
pascallanger
f6c5252376
DEVO PPM fixed id mode
2016-08-27 11:38:07 +02:00
